CNY7, CNY72, CNY73, CNY74, CNY7F, CNY7F2, CNY7F3, CNY7F4, MOC80, MOC802, MOC803, MOC804, MOC805, MOC80, MOC807, MOC808 Phototransistor Optocouplers Features UL recognized (File # E90700) VDE recognized Add option V for white package (e.g., CNY7F2VM) File #02497 Add option 300 for black package (e.g., CNY7F2300) File #947 Current transfer ratio in select groups High BV CEO 70V minimum (CNY7X/M, CNY7FX/M, MOC80/7/8) Closely matched current transfer ratio (CTR) minimizes unit-to-unit variation. Very low coupled capacitance along with no chip to pin base connection for minimum noise susceptability (CNY7FX/M, MOC80X) White Package (-M Suffix) Applications Power supply regulators Digital logic inputs Microprocessor inputs Appliance sensor systems Industrial controls Description September 200 The CNY7, CNY7F and MOC80X devices consist of a Gallium Arsenide IRED coupled with an NPN phototransistor in a dual in-line package. Black Package (No -M Suffix) CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers Schematic ANODE NC ANODE BASE CATHODE 2 5 COLLECTOR CATHODE 2 5 COLLECTOR NC 3 4 EMITTER NC 3 4 EMITTER CNY7F/2/3/4 CNY7FM/2M/3M/4M MOC80/2/3/4/5//7/8 CNY7/2/3/4 CNY7M/2M/3M/4M 200 Fairchild Semiconductor Corporation www.fairchildsemi.com CNY7X, CNY7FX, MOC80X Rev..
Absolute Maximum Ratings Symbol Parameters Device Value Units TOTAL DEVICE T STG Storage Temperature M -40 to +50 C non M -55 to +50 T OPR Operating Temperature M -40 to +00 C non M -55 to +00 T SOL Lead Solder Temperature All 20 for 0 sec C P D Total Device Power Dissipation @ 25 C (LED plus detector) M 250 mw Derate Linearly From 25 C non M 250 M 2.94 mw/ C non M 3.30 EMITTER I F Continuous Forward Current M 0 ma non M 00 V R Reverse Voltage All V I F (pk) Forward Current - Peak ( µs pulse, 300 pps) M.5 A non M.0 P D LED Power Dissipation 25 C Ambient M 20 mw Derate Linearly From 25 C non M 50 M.4 mw/ C non M.8 DETECTOR I C Continuous Collector Current All 50 ma V CEO Collector-Emitter Voltage CNY7X/M, CNY7FX/M, 70 V MOC80/7/8 MOC80/2/3/4/5 30 V V ECO Emitter Collector Voltage All 7 V P D Detector Power Dissipation @ 25 C M 50 mw Derate Linearly from 25 C non M 50 M.7 mw/ C non M 2.0 CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers CNY7X, CNY7FX, MOC80X Rev.. 2 www.fairchildsemi.com
Electrical Characteristics (T A = 25 C Unless otherwise specified.) () Individual Component Characteristics Symbol Parameters Test Conditions Device Min. Typ. Max. Units EMITTER V F Input Forward Voltage I F = 0mA CNY7FX/M.0.35.5 V CNY7X/M I F = 0mA MOC80X.0.5.50 C J Capacitance V F = 0 V, f =.0MHz All 8 pf I R Reverse Leakage Current V R = V All 0.00 0 µa DETECTOR Breakdown Voltage MOC80/2/3/4/5 30 00 V BV CEO Collector to Emitter I C =.0mA, I F = 0 MOC80/7/8 70 00 CNY7F/2/3/4/M CNY7/2/3/4/M BV CBO Collector to Base I C = 0µA, I F = 0 CNY7/2/3/4/M 70 20 BV ECO Emitter to Collector I E = 00µA, I F = 0 All 7 0 I CEO Leakage Current Collector to Emitter V CE = 0 V, I F = 0 All 50 na I CBO Collector to Base V CB = 0 V, I F = 0 CNY7/2/3/4/M 20 na C CE Capacitance Collector to Emitter V CE = 0, f = MHz All 8 pf C CB Collector to Base V CB = 0, f = MHz CNY7/2/3/4/M 20 pf C EB Emitter to Base V EB = 0, f = MHz CNY7/2/3/4/M 0 pf Isolation Characteristics CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers Symbol Characteristic Test Conditions Device Min. Typ.** Max. Units Black Package 5300 Vac(rms)* V ISO Input-Output Isolation Voltage f = 0 Hz, t = min., I I-O 2µA (4) f = 0 Hz, t = sec., M White Package 7500 Vac(pk) I I-O 2µA (4) R ISO Isolation Resistance V I-O = 500 VDC (4) All 0 Ω C ISO Isolation Capacitance V I-O = Ø, f = MHz (4) Black Package 0.5 pf M White Package Note: * 5300 Vac(rms) for minute equates to approximately 9000 Vac (pk) for second ** Typical values at T A = 25 C CNY7X, CNY7FX, MOC80X Rev.. 3 www.fairchildsemi.com
Transfer Characteristics (T A = 25 C Unless otherwise specified.) () Symbol DC Characteristics Test Conditions Min. Typ. Max. Units COUPLED (CTR) (2) V CE(sat) Output Collector Current Collector-Emitter Saturation Voltage MOC80 I F = 0mA, V CE = 0V 50 80 % MOC802 73 7 MOC803 08 73 MOC804 0 25 MOC805 5 33 MOC80 50 50 MOC807 00 300 MOC808 250 00 CNY7F/M I F = 0mA, V CE = 5V 40 80 CNY7F2/2M 3 25 CNY7F3/3M 00 200 CNY7F4/4M 0 320 CNY7/M 40 80 CNY72/2M 3 25 CNY73/3M 00 200 CNY74/4M 0 320 CNY7XM/FXM I C = 2.5mA, I F = 0mA V MOC80/2/3/4/5//7/8 I C = 500µA, I F = 5.0mA CNY7X/FX I F = 0mA, I C = 2.5mA 0.3 V Symbol AC Characteristics (3) Test Conditions Min. Typ.* Max. Units NON-SATURATED SWITCHING TIME t on Turn-On Time MOC80/2/3/4/5 I C = 2.0mA, V CC = 0V, R L = 00Ω 2 20 µs MOC80/7/8 CNY7X/FX 0 t off Turn-Off Time MOC80/2/3/4/5 I C = 2.0mA, V CC = 0V, R L = 00Ω 3 20 MOC80/7/8 CNY7X/FX 0 t d Delay Time CNY7XM/FXM I F = 0mA, V CC = 5V, R L = 75Ω 5. µs t r Rise Time All Devices I C = 2.0mA, V CC = 0V, R L = 00Ω µs CNY7XM/FXM I F = 0mA, V CC = 5V, R L = 75Ω 4.0 t s Storage Time CNY7XM/FXM I F = 0mA, V CC = 5V, R L = 75Ω 4. µs t f Fall Time All Devices I C = 2.0mA, V CC = 0V, R L = 00Ω 2 CNY7XM/FXM I F = 0mA, V CC = 5V, R L = 75Ω 3.5 µs CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers CNY7X, CNY7FX, MOC80X Rev.. 4 www.fairchildsemi.com
Transfer Characteristics (Continued) (T A = 25 C Unless otherwise specified.) () Symbol AC Characteristics (3) Test Conditions Min. Typ. Max. Units SATURATED SWITCHING TIMES t on Turn-on Time CNY7/F I F = 20mA, V CE = V 5.5 µs CNY72/F2 CNY73/F3 CNY74/F4 I F = 0mA, V CE = V 8.0 t r Rise Time CNY7/F I F = 20mA, V CE = V 4.0 µs CNY72/F CNY73/F3 CNY74/F4 I F = 0mA, V CE = V.0 CNY7M/FM I F = 20mA, V CC = 5V, R L = kω 4.0 CNY72M/3M/4M I F = 0mA, V CC = 5V, R L = kω.0 CNY7F2M/F3M/F4M t d CNY72M/3M/4M I F = 0mA, V CC = 5V, R L = kω 8.0 Delay Time CNY7M/FM I F = 20mA, V CC = 5V, R L = kω 5.5 µs CNY7F2M/F3M/F4M t off Turn-off Time CNY7/F I F = 20mA, V CE = V 34 µs CNY72/F2 CNY73/F3 CNY74/F4 I F = 0mA, V CE = V 39 t f Fall Time CNY7/F I F = 20mA, V CE = V 20 µs CNY72/F2 CNY73/F3 CNY74/F4 I F = 0mA, V CE = V 24 CNY7M/FM I F = 20mA, V CC = 5V, R L = kω 20.0 CNY72M/3M/4M CNY7F2M/F3M/F4M I F = 0mA, V CC = 5V, R L = kω 24.0 t s Storage Time CNY7M/FM I F = 20mA, V CC = 5V, R L = kω 34.0 µs CNY72M/3M/4M I F = 0mA, V CC = 5V, R L = kω 39.0 CNY7F2M/F3M/F4M µs CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers ** All typicals at T A = 25 C Notes:. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = I C /I F x 00%. 3. For test circuit setup and waveforms, refer to Figures 20. 4, For this test, Pins and 2 are common, and Pins 4 are 5 are common. CNY7X, CNY7FX, MOC80X Rev.. 5 www.fairchildsemi.com
NORMALIZED CTR NORMALIZED CTR NORMALIZED CTR NORMALIZED CTR.4.2.0 Fig. Normalized CTR vs. Forward Current V CE = 5.0V Normalized to I F = 0 ma 0.0 0 5 0 5 20 I F - FORWARD CURRENT (ma)..4.2.0 Fig. 3 Normalized CTR vs. Ambient Temperature I F = 0 ma..4.2.0 Fig.2 Normalized CTR vs. Forward Current V CE = 5.0V Normalized to I F = 0 ma 0.0 0 2 4 8 0 2 4 8 20 I F - FORWARD CURRENT (ma).4.2.0 Fig. 4 Normalized CTR vs. Ambient Temperature I F = 0 ma CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers Normalized to I F = 0 ma -75-50 -25 0 25 50 75 00 25 T A - AMBIENT TEMPERATURE ( C) Normalized to I F = 0 ma -0-40 -20 0 20 40 0 80 00 T A - AMBIENT TEMPERATURE ( C) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)).0 0.9 0.7 0.5 0.3 0. Fig. 5 CTR vs. RBE (Unsaturated) I F = 0 ma V CE = 5.0 V 0.0 0 00 000 NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) Fig. CTR vs. RBE (Unsaturated) R BE - BASE RESISTANCE (kω) R BE - BASE RESISTANCE (kω).0 0.9 0.7 0.5 0.3 0. I F = 0 ma V CE = 5.0 V 0.0 0 00 000 CNY7X, CNY7FX, MOC80X Rev.. www.fairchildsemi.com
SWITCHING SPEED - (µs) SWITCHING SPEED - (µs) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)).0 0.9 0.7 0.5 0.3 0. 000 00 0 Fig. 9 Switching Speed vs. Load Resistor I F = 0 ma V CC = 0 V Fig. 7 CTR vs. RBE (Saturated) 0.0 0 00 000 R BE - BASE RESISTANCE (k Ω) T off T f I F = 0 ma V CE = 0.3 V NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)).0 0.9 0.7 0.5 0.3 0. 000 00 0 Fig. 8 CTR vs. RBE (Saturated) 0.0 0 00 000 Fig. 0 Switching Speed vs. Load Resistor I F = 0 ma V CC = 0 V R BE - BASE RESISTANCE (k Ω) T off I F = 0 ma T f V CE = 0.3 V CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers T on T on T r T r 0. 0. 0 00 R-LOAD RESISTOR (kω) 0. 0. 0 00 R-LOAD RESISTOR (kω) Fig. Normalized t on vs. R BE Fig. 2 Normalized t on vs. R BE 5.0 5.0 NORMALIZED ton - (ton(rbe) / ton(open)) 4.5 4.0 3.5 3.0 2.5 2.0.5 V CC = 0 V I C = 2 ma R L = 00 Ω NORMALIZED ton - (ton(rbe) / ton(open)) 4.5 4.0 3.5 3.0 2.5 2.0.5.0 V CC = 0 V I C = 2 ma R L = 00 Ω.0 0 00 000 0000 00000 0.5 0 00 000 0000 00000 R BE - BASE RESISTANCE (k Ω) R BE - BASE RESISTANCE (k Ω) CNY7X, CNY7FX, MOC80X Rev.. 7 www.fairchildsemi.com
NORMALIZED toff - (toff(rbe) / toff(open)) VF - FORWARD VOLTAGE (V).4.3.2..0 0.9 0.7 0.5 0.3 0. 0 00 000 0000 00000.8.7..5.4.3.2 Fig. 3 Normalized t off vs. R BE R BE - BASE RESISTANCE (k Ω) V CC = 0 V I C = 2 ma R L = 00 Ω Fig. 5 LED Forward Voltage vs. Forward Current T A = -55 C T A = 25 C NORMALIZED toff - (toff(rbe) / toff(open)).4.3.2..0 0.9 0.7 0.5 0.3 Fig. 4 Normalized t off vs. R BE V CC = 0 V I C = 2 ma R L = 00 Ω 0. 0 00 000 0000 00000 VF - FORWARD VOLTAGE (V) R BE - BASE RESISTANCE (k Ω) Fig. LED Forward Voltage vs. Forward Current.8.7..5.4.3.2 T A = -55 C T A = 25 C CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers. T A = 00 C. T A = 00 C.0 0 00 I F - LED FORWARD CURRENT (ma).0 0 00 I F - LED FORWARD CURRENT (ma) Fig. 7 Collector-Emitter Saturation Voltage vs Collector Current Fig. 8 Collector-Emitter Saturation Voltage vs Collector Current VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) 00 0 0. 0.0 I F = 2.5 ma I F = 0 ma I C - COLLECTOR CURRENT (ma) 0.00 0.0 0. 0 VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) 00 0 0. 0.0 I F = 2.5 ma I F = 0 ma 0.00 0.0 0. 0 I C - COLLECTOR CURRENT (ma) CNY7X, CNY7FX, MOC80X Rev.. 8 www.fairchildsemi.com
ICEO - COLLECTOR-EMITTER DARK CURRENT (µa) 0 0 0 0-0 -2 0-3 0-4 0-5 Fig. 9 Dark Current vs. Ambient Temperature V CE = 0 V 0-0 25 50 75 00 25 T A - AMBIENT TEMPERATURE ( C) CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers V CC INPUT PULSE 0% I F I C R L 90% OUTPUT PULSE INPUT OUTPUT (V CE ) t d t s t r t f t on t off Figure 20. Switching Time Test Circuit Figure 2. Switching Time Test Circuit CNY7X, CNY7FX, MOC80X Rev.. 9 www.fairchildsemi.com
Black Package (No -M Suffix) Package Dimensions (Through Hole) SEATING PLANE 0.070 (.78) 0.045 (.4) 00 (5.08) 0.5 (2.92) 0.54 (3.90) 0.00 (2.54) 0.022 (0.5) 0.0 () 0.00 (2.54) TYP 0.350 (8.89) 0.330 (8.38) PIN ID. 0.020 (0.5) MIN 0.0 (0) 0.008 (0) 70 (.8) 40 (.0) 0 to 5 0.300 (7.2) TYP Package Dimensions ( Lead Spacing) Package Dimensions (Surface Mount) 00 (5.08) 5 (4.8) 0.022 (0.5) 0.0 () 3 4 0.350 (8.89) 0.330 (8.38) 2 5 0.070 (.78) 0.045 (.4) PIN ID. 0.020 (0.5) MIN 0.00 (2.54) TYP Lead Coplanarity : 0.004 (0.0) MAX 70 (.8) 40 (.0) 0.300 (7.2) TYP 0.0 (0) MIN 0.35 (8.00) MIN 05 (0.30) MAX 0.0 () 0.008 (0) Recommended Pad Layout for Surface Mount Leadform (Black Package Only) PIN ID 0.070 (.78) 70 (.8) 40 (.0) 0.00 (.52) CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers 5 (0.54) 0.00 (2.54) SEATING PLANE 00 (5.08) 0.35 (3.43) 0.350 (8.89) 0.330 (8.38) 0.070 (.78) 0.045 (.4) 95 (7.49) 0.030 (0.7) 0.54 (3.90) 0.00 (2.54) 0.004 (0.0) MIN 0.0 (0) 0.008 (0) 0.022 (0.5) 0.0 () 0.00 (2.54) TYP 00 () TYP 0 to 5 Note: All dimensions are in inches (millimeters) CNY7X, CNY7FX, MOC80X Rev.. 0 www.fairchildsemi.com
White Package (-M Suffix) Package Dimensions (Through Hole) SEATING PLANE 0.070 (.77) 0.040 (.02) 00 (5.08) 0.5 (2.93) 0.00 (2.54) 0.05 (0.38) 0.020 (0.50) 0.0 () 0.350 (8.89) 0.320 (8.3) 0.04 (0.3) 0.00 (5) 0 (.0) 40 (.0) 0.320 (8.3) Package Dimensions ( Lead Spacing) 0.350 (8.89) 0.320 (8.3) 0.00 (2.54) Pin ID PIN ID 0 (.0) 40 (.0) 5 0.02 (0.30) Package Dimensions (Surface Mount) Seating Plane 0.070 (.77) 0.040 (.02) 00 (5.08) 0.5 (2.93) 0.025 (3) 0.020 (0.5) 0.020 (0.50) 0.0 () 0.350 (8.89) 0.320 (8.3) 0.04 (0.3) 0.00 (5) Pin ID 0 (.0) 40 (.0) 0.00 [2.54] 0.02 (0.30) 0.008 (0) 0.390 (9.90) 0.332 (8.43) 0.320 (8.3) 0.035 (8) 0.02 (0.30) Recommended Pad Layout for Surface Mount Leadform (White Package Only) 0.070 (.78) 0.00 (.52) CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers 25 (0.79) 0.00 (2.54) SEATING PLANE 0.070 (.77) 0.040 (.02) 00 (5.08) 0.5 (2.93) 0.04 (0.3) 0.00 (5) 0.305 (7.75) 0.030 (0.7) 0.00 (2.54) 0.05 (0.38) 0.020 (0.50) 0.0 () 0.00 [2.54] Note: All dimensions are in inches (millimeters) 0.02 (0.30) 0.008 () 25 (0) 00 () CNY7X, CNY7FX, MOC80X Rev.. www.fairchildsemi.com
Ordering Information Black Package Part Number Example (No Suffix) White Package Part Number Example (M Suffix) Description CNY7S CNY7SM Surface Mount Lead Bend CNY7SD CNY7SR2M Surface Mount; Tape and reel CNY7W CNY7TM " Lead Spacing CNY7300 CNY7VM VDE Approved CNY7300W CNY7TVM VDE Approved, " Lead Spacing CNY73S CNY7SVM VDE Approved, Surface Mount CNY73SD CNY7SR2VM VDE Approved, Surface Mount, Tape & Reel Carrier Tape Specifications (Black Package, No Suffix) 4.85 ± 0 3.2 ± 0.30 ± 0.05 4.0 ± 0. 0. MAX 0.30 ± 0 2.0 ± 0. 4.0 ± 0. Ø.55 ± 0.05.75 ± 0.0 7.5 ± 0..0 ± 0.3 9.55 ± 0 Ø. ± 0. CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers User Direction of Feed Carrier Tape Specifications (White Package, M Suffix) 4.5 ± 0 0.30 ± 0.05 4.0 ± 0. 2.0 ± 0. 2.0 ± 0.05 Ø.5 MIN.75 ± 0.0 2.0 ± 0..5 ±.0 24.0 ± 0.3 9. ± 0 0. MAX 0. ± 0 Ø.5 ± 0./-0 User Direction of Feed CNY7X, CNY7FX, MOC80X Rev.. 2 www.fairchildsemi.com
Marking Information (Black package non M suffix) Definitions Fairchild logo 2 Device number Reflow Profile (Black Package, No Suffix) 3 CNY7- V XX YY K 3 4 5 VDE mark (Note: Only appears on parts ordered with VDE option See order entry table) Two digits year code, e.g., 03 ; One digit year code for M 4 version, e.g. 5 5 Two digit work week ranging from 0 to 53 Assembly package code 2 CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers Temperature ( C) 300 250 200 50 00 50 25 C, 0 30 s 225 C peak Time above 83 C, 0 50 sec Ramp up = 3C/sec Peak reflow temperature: 225 C (package surface temperature) Time of temperature higher than 83 C for 0 50 seconds One time soldering reflow is recommended 0 0 0.5.5 2 2.5 3 3.5 4 4.5 Time (Minute) CNY7X, CNY7FX, MOC80X Rev.. 3 www.fairchildsemi.com
Marking Information (White package M suffix) Definitions Fairchild logo 2 Device number Reflow Profile (White Package, M Suffix) CNY7- V X YY Q 3 4 5 VDE mark (Note: Only appears on parts ordered with VDE 3 option See order entry table) 4 Single digit year code, e.g. 5 5 Two digit work week ranging from 0 to 53 Assembly package code 2 CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers C 300 280 20 240 220 200 80 0 40 20 00 80 0 40 20 0.822 C/Sec Ramp up rate 33 Sec 0 0 20 80 270 Time (s) 20 C Time above 83 C = 90 Sec >245 C = 42 Sec 30 CNY7X, CNY7FX, MOC80X Rev.. 4 www.fairchildsemi.com
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ActiveArray Bottomless Build it Now CoolFET CROSSVOLT DOME EcoSPARK E 2 CMOS EnSigna FACT FAST FASTr FPS FRFET FACT Quiet Series GlobalOptoisolator GTO HiSeC I 2 C i-lo ImpliedDisconnect IntelliMAX ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro Across the board. Around the world. The Power Franchise Programmable Active Droop OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power247 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect µserdes ScalarPump SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT -3 SuperSOT - SuperSOT -8 SyncFET TCM TinyBoost TinyBuck TinyPWM TinyPower TinyLogic TINYOPTO TruTranslation UHC UniFET UltraFET VCX Wire DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. CNY7X, CNY7FX, MOC80X Phototransistor Optocouplers LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20 CNY7X, CNY7FX, MOC80X Rev.. 5 www.fairchildsemi.com