SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30) Silicone rubber Rotor : Polyamide Pattern : Copper alloy, Gold-plated Polyphenylenesulphide UL9HB UL9V-0 UL9V-0 Contact Terminal pin Copper alloy, Gold-plated PART NUMBER DESIGNATION Series name No. of positions 6 positions 2 positions Shape of rotor 0 With knob (with extended shaft) 2 S D - 0 0 T B Shape of terminal BGull wing ( type only) Blank : Through hole pin (Snap-in terminal pin) Form of packaging TTaping (Gull wing type only) W Blank Code format Real code (Rotor color Yellow) 3Complementary code (Rotor color Red) Setting position 0 Side setting Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/ 2000 LIST OF PART NUMBERS Binary coded decimal Shape of rotor Form of packaging Real code Complementary code Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SD-20 SD-20W SD-2 SD-2W SD-22 SD-22W SD-20 SD-20W SD-2 SD-2W SD-22 SD-22W SD-20B SD-20WB SD-20TB SD-22B SD-22WB SD-22TB SD-2030 SD-2030W SD-230 SD-230W SD-2230 SD-2230W SD-203 SD-203W SD-23 SD-23W SD-223 SD-223W SD-2030B SD-2030WB SD-2030TB SD-2230B SD-2230WB SD-2230TB 500 pcs./reel 500 pcs./reel Binary coded hexadecimal Shape of rotor Form of packaging Real code Complementary code Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SD- SD-W SD- SD-W SD-2 SD-2W SD- SD-W SD- SD-W SD-2 SD-2W SD-B SD-WB SD-TB SD-2B SD-2WB SD-2TB SD-30 SD-30W SD-30 SD-30W SD-230 SD-230W SD-3 SD-3W SD-3 SD-3W SD-23 SD-23W SD-30B SD-30WB SD-30TB SD-230B SD-230WB SD-230TB 500 pcs./reel 500 pcs./reel Verify the above part numbers when placing orders. Taping and tray version can be supplied only in reel or tray units.
SD-00/ 2000 STANDARD SPECIFICATIONS ELECTRICAL CHARACTERISTICS Circuit type Operating temperature range Storage temperature range BCD (Real code, complementary code) BCH (Real code, complementary code) 0 ~ 85 C Contact rating Non-switching Switching Minimum DC50 V 0 ma DC5 V 0 ma DC20 mv μa Sealing Non washable Contact resistance 0 m maximum Insulation resistance 00 M (DC0 V) minimum Net weight Without knob 0.65 g With knob 0.76 g Without knob Side setting 0.95 g With knob Side setting.05 g Dielectric strength AC250 V, 60 s MECHANICAL CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS Reflow profile for soldering heat evaluation Temperature Vibration Shock Humidity Load life High temperature exposure Low temperature exposure Thermal shock () 250 200 50 0 50 80 50 (Amplitude).5 mm or (Acceleration) 98 m/s 2, -500- Hz, 3 directions for 2 h each 90 m/s 2, ms 6 directions for 3 times each Resistance load DC50V 0mA 0 C, Relative humidity 90 ~ 95 %, 20 h 20000 steps DC5 V, 0 ma +5 Peak : 250 0 Over 230 Pre Heating Zone 90 ± 30 s Heating time 30 ± s 85 C, 96 h 0 C, 96 h 0 (0.5 h) ~ 85 C ( 0.5 h ), 5 cycles Soldering Zone Reflow : two times maximum No. of positions Adjustment torque Stepping angle Terminal strength (Through hole pin only) Stop strength (With knob only) Solderability Soldering heat Gull wing Through hole pin Shear (Gull wing only) Substrate bending (Gull wing only) Pull-off strength (Gull wing only) 6 (SD-00), (SD-2000) ~ 25 mn m { ~ 255 gf cm} 22.5 (SD-00), 36 (SD-2000) N {.02 kgf} minimum N {.02 kgf}, s 25 ± 3 C, 2 ~ 3 s Reflow : Peak temperature 255 C (Please refer to the profile below.) Manual soldering350 ± C, 3 ~ s Flow : 260 ± 3 C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board 5 ~ 6 s, two times maximum Manual soldering380 ± C, 3 ~ s 5 N {0.5 kgf}, s Width 90 mm, bend 3 mm, 5 s, time 5 N {0.5 kgf}, s { } : Reference only
ABCDEF02356789 ABCDEF02356789 ABCDEF02356789 6 7 8 9 05 SD-00/ 2000 OUTLINE DIMENSIONS <Through hole pin, > SD- (Real code) SD-30 (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-20 (Real code) SD-2030 (Complementary code) 0.6 W 3.2 L.2 D 3.9 0.6 W 3.2 L.2 D 3.9 SD-2 (Real code) SD-230 (Complementary code) SD-22 (Real code) SD-2230 (Complementary code) 0.6 W 3.2 L.5 D 3.9 0.6 W 3.2 L.5 D 3.9 SD- (Real code) SD-30 (Complementary code) SD-2 (Real code) SD-230 (Complementary code) 0.7 W D 6.5 3.9 0.7 W D 6.5 3.9 φ 3.9 2 3 φ 3.9
ABCDEF02356789 ABCDEF02356789 ABCDEF02356789 6 7 8 9 05 SD-00/ 2000 OUTLINE DIMENSIONS <Through hole pin, Side setting> SD- (Real code) SD-3 (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-20 (Real code) SD-203 (Complementary code) 0.6 W 3.2 L.2 D 6.8 0.6 W 3.2 L.2 D 6.8 3.3 3.3 SD-2 (Real code) SD-23 (Complementary code) SD-22 (Real code) SD-223 (Complementary code) 0.6 W 3.2 L.5 D 6.8 0.6 W 3.2 L.5 D 6.8 3.3 3.3 SD- (Real code) SD-3 (Complementary code) SD-2 (Real code) SD-23 (Complementary code) 0.7 W D 6.5 6.8 0.7 W D 6.5 6.8 φ 3.9 2 3 φ 3.9 3.3 3.3
ABCDEF02356789 ABCDEF02356789 SD-00/ 2000 OUTLINE DIMENSIONS <Gull wing, > SD-B (Real code) SD-30B (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-20B (Real code) SD-2030B (Complementary code) 0.6 W 3.2 L.2 D 0.6 W 3.2 L.2 D 3 3 SD-2B (Real code) SD-230B (Complementary code) SD-22B (Real code) SD-2230B (Complementary code) 0.6 W 3.2 L.5 D 0.6 W 3.2 L.5 D 3 3
SD-00/ 2000 CODE FORMAT Code SD-00 series (6 positions) No. of positions SD-2000 series ( positions) Position 0 2 3 5 6 7 8 9 A B C D E F Real code Complementary code Contact closed 8 2 8 2 TERMINAL CONNECTION / P.C.B. THROUGH HOLE DIMENSIONS (Unit: mm) Side setting Real code Complementary code Operating face of real code Operating face of complementary code Terminal pin layout (Bottom view) 8 C 2 C 8 C 2 C C 8 C 2 C 8 C 2 ± 0. 6 φ 0.8 hole ± 0. 6 φ 0.8 hole P.C.B. dimensions (Bottom view) ± 0. SD-00/2000 case ± 0. SD-00/2000 case RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS.75.75 6.5 ()
SD-00/ 2000 PACKAGING SPECIFICATIONS <Taping packaging specifications> Embossed tape dimensions Reel dimensions (Unit: mm) (In accordance with EIAJ ET-7200A) 25. ± End Empty Filled Empty Head 2 ± 0.5 φ 3 ± 0.2 φ 330 ± 2 φ 80 ± 0 mm min. 20 pitches min. Direction of feed 00 mm min. Part No. label φ 2 ± 0.8 29. ± (Unit: mm) (In accordance with EIAJ RC-09B) +0. φ.5 0 6 ± 0. ± 0. 2 ± 0..5 ± 0..75 ± 0. 0. ± 0. 2 Direction of feed.8 < specifications> <Bulk pack specifications>