SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
|
|
- Darlene Sims
- 5 years ago
- Views:
Transcription
1 SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL STRUCTURE Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material Flammability PPS UL-9V- Polyphenylenesulphide Ceramic g-pd cermet RuO cermet UL-9V- Epoxy Multi metal alloy Copper alloy, Sn-Cu-plated UL-9V- Polyamide Brass, Nickel-plated PRT NUMBER DESIGNTION S M - T W Ω ( ) Series name Electrical turn turns turns Form of packaging T Taping (Reel) Blank Bulk in plastic bag W, XTop adjustmet, BSide adjustmet Resistance code Resistance value Product shape (Shape of terminal) Please refer to the LIST OF PRT NUMBERS when placing orders. - Specifications are subject to change without notice.
2 LIST OF PRT NUMBERS Electrical turn djustment position Top adjustment Side adjustment Top adjustment Side adjustment Pieces in package Shape of terminal W J- (J-hook) X J- (J-hook) B W J- (J-hook) X J- (J-hook) B Form of packaging Taping (reel) SM-TW SM-TX SM-T SM-TB SM-TW SM-TX SM-T SM-TB T, TB : pcs./reel TW, TX : pcs./reel Plastic bag SM-W SM-X SM- SM-B SM-W SM-X SM- SM-B pcs./pack ELECTRICL CHRCTERISTICS Nominal resistance range Resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical turn End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight Reflow profile for soldering heat evaluation Temperature ( C) 8 C C + Peak : C Over C Pre Heating Zone 9 ± s Heating time ± s Ω ~ MΩ ± %. W (8 C) W ( C) Linear law DC V or power rating, whichever is smaller m m or power rating, whichever is smaller turns (SM-), turns (SM-) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater ~ C ± - / C maximum MΩ minimum (DC V) C V, s pprox..7 g Soldering Zone Nominal resistance values Ω Ω Ω Ω Ω Ω kω kω kω kω kω kω kω kω kω MΩ MΩ Fig. The products indicated by mark are manufactured upon receipt of order basis. Fig. The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in reel units. MECHNICL CHRCTERISTICS Operating torque Mechanical stop Rotational life Thrust to shaft Solderability Shear (dhesion) Substrate bending Pull-off strength ENVIRONMENTL CHRCTERISTICS Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat 7. mn m {8 gf cm} maximum Clutch action cycles [R/R ± ( Ω+ %)] N {. kgf} minimum ± C, ~ s N {. kgf} s Width 9 mm, bend mm, s, time N {. kgf} s Test conditions ~ C (. h), cycles ~ C (8 ~ 98 %), cycles, h 98 m/s, ms directions for times each (mplitude). mm or (cceleration) 9 m/s, ~ Hz, directions, times each 8 C,. W, h C, h C, h 8 C, s C Reflow : Peak temperature C (Please refer to the profile below.) Manual soldering ± C, ~ s R/R S.S. { }Reference only Specifications [R/R %] [S.S. %] [R/R %] [R/R %] [S.S. %] [R/R % or Ω] [S.S. %] [R/R %] [S.S. %] [R/R %] [S.S. %] No leaks (No continuous bubbles) [R/R %] Change in total resistance Setting stability Reflow : two times maximum - Specifications are subject to change without notice.
3 MXIMUM INPUT RTINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (m) k.8.8 k.. k. 7.7 k.. k 7.7. k. k 8.8 k. k. M. M. The products indicated by mark are manufactured upon receipt of order basis. RECOMMENDED P.C.B. PD OUTLINE DIMENSIONS B W X (Unit: mm) Note) The zero point is the center of mounting. - Specifications are subject to change without notice.
4 OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ±. (Unit : mm) W..8 X φ., Slot.W.D CW rotation Note the terminal position φ., Slot.W.D.. Resistance code & Produ ction d ate code φ., Slot.W.D. B φ., Slot.W.D. - Specifications are subject to change without notice.
5 EMBOSSED TPE DIMENSIONS End Empty Filled Empty mm min. pitches min. Leader Direction of feed mm min. Head PCKGING SPECIFICTIONS <Taping packaging specifications> Taping version (T, TB) is packaged in pcs. per reel. Orders will be accepted for units of pcs., i.e.,,, pcs., etc. TW, TX is packaged in pcs. per reel. Orders will be accepted for units of pcs., i.e.,, 7 pcs., etc. Maximum number of consecutive missing pieces = Leader length and reel dimension are shown in the diagrams below. REEL DIMENSIONS JIS C 8-Conforms to JIS C 8- T/TBEIJ ET-7 T/TB type : In accordance with EIJ ET-7 (Unit: mm) + (T/TB) 7±. (TW, TX) ±.8 ±. ±. + TW/TX 8. (T/TB).± (T/TB) 8 (TW, TX) 9.± (TW/TX) T/TB +. φ. ±. ±..7 ±. 7. ± ±. (SM-W) Installation example (SM-W) φ. +. ±. ±.. ±..7 ±.. ±. (SM-) Installation example (SM-) ±..7 Cross section - 8 ±.. Cross section - <Bulk pack specifications> Unit of bulk in a plastic bag is pcs. per pack. Boxing of bulk in a plastic bag is performed with pcs. per box. - Specifications are subject to change without notice.
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
More informationSM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material
More informationST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
More informationS-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel
More informationFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust
More informationCOPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment
More informationSINGLE TURN CERMET TRIMMERS
SINGLE TURN INTERNAL STRUCTURE 4 5!0 9 8 6 FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable 4 5 6 8 9!0 Part name Housing
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B
CFP RoHS compliant INTERNA STRUCTURE FEATURES Part name Cover Material Flammability Slider Housing Polyamide U94V- Slider contact APPICATIONS Fixed contact Terminal pin Copper alloy, Gold-plated Piano
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant
RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning
More informationBase S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationCS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
More information1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationApproval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.
WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability
More informationWF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationMulti-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.2.6 No.RC-K-HTS-0001-13 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: RC1/4,1/2 RoHS COMPLIANCE ITEM Product specification contained in this specification are
More informationLKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
More information/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationAD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
More informationCKD Series Low ESL Feed Through Type
CKD Series Low ESL Feed Through Type Type: CKD110JB CKD310JB CKD510JB CKD610JB CKD61BJB Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read efore using this product SAFETY REMINDERS REMINDERS
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationCurrent Sensing Resistor Shunt Type >SMS Series
Page: 1 of 6 General Chip size from 3921 to 5931. Resistance value from 0.2m to 3m Low thermal EMF. Low TCR. Lead free, RoHS compliant for global. pplications and halogen free. pplication Switching model
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationCPTC Thermistor:PT Series
Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature
More informationReference Only. Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4
Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4 Reference Specification 1.Scope This reference specification applies to Chip Common Mode Choke Coil Arrays DLP2ADA Series.
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
More informationNP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
More informationCER Series Controlled ESR Capacitors
CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationMuti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
More informationCurrent Sensing Resistor Shunt Type >SMS Series. General. Application
Page: 1/ 7 General Chip size from 2512 to 5931 Resistance value from 0.2m to 4m Low thermal EMF Low TCR Lead free, RoHS compliant for global pplications and halogen free pplication Switching model power
More information7000 SERIES THUMBWHEEL SWITCHES
7000 SERIES THUMBWHEEL SWITCHES The combines heavy-duty construction and a compact package size. Designed to meet demanding military performance specifications, the switch features a unique one-piece housing
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationMetal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationCR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
More informationATC 100 A Series Porcelain Superchip Multilayer Capacitors
00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 00 pf High Q Ultra-Stable Performance Low ESR/ESL High Self-Resonance Low Noise Established Reliability
More informationSURFACE MOUNT RESISTOR RM Series: Thick Film 0.01~100M Ω RoHS
RM Series: Thick Film 0.0~00M Ω RoHS INTRODUCTION RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More informationNTC Thermistors, Accuracy Line
N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS C-Array: Class 2, X7R 16/25/50 V size 0612 (4 0603) Product Specification Jul 21, 2003 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS C-Array: Class 2, X7R 16/25/50 V Product Specification Jul 21, 2003 V.6 FEATURES 0612 (4 0603) capacitors (of the same capacitance value) per array
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationReference Only. Spec No. JEFL243E-0018F-01 P1/10
Spec No. JEFL243E-0018F-01 P1/10 Chip Common Mode Choke Coil DLP0NS HL2 Reference Specification 1. Scope This reference specification applies to Chip Common Mode Choke Coil DLP0NS Series. 2. Part Numbering
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationSUNSTAR 传感与控制 TEL: FAX: Hall Sensor As of Nov SUNSTAR 自动化
As of Nov. 2004 E-MAIL: INTRODUCTION is a magnetic sensor using Hall effect, generating output voltage directly proportional to magnetic field. FEATURE AND APPLICATION Feature - SAMSUNG is highly sensitive
More information