COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
|
|
- Elaine Little
- 5 years ago
- Views:
Transcription
1 SINGLE TURN INTERNAL STRUCTURE FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment Increase in the level of characteristics in the highfrequency field (Compared to the FT-6) Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material Nickel silver Silicone rubber RuO cermet Copper, Solder-plated Copper, Tin-plated Epoxy Ceramic Ag-Pd cermet Flammability PBT UL-4V-0 Polybutyleneterephthalate CFCs (PBBOs, PBBs) CFCs, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. UL-4HB UL-4V-0 PART NUMBER DESIGNATION F T - 6 T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin Blank Sn-Pb E Sn (Lead-free) Form of packaging T Taping (Ammo pack type) Blank Bulk in vinyl bags Resistance value Product shape P Top adjustment S Side adjustment V Top adjustment X Side adjustment H Side adjustment N Side adjustment Please refer to the LIST OF PART NUMBERS when placing orders.
2 FT-6 LIST OF PART NUMBERS position Top adjustment Side adjustment Form of packaging Taping (Ammo pack type) Sn-Pb Not manufactured Sn (Lead-free) Sn-Pb Vinyl bag Sn (Lead-free) FT-6TP FT-6ETP FT-6P FT-6EP FT-6TV FT-6ETV FT-6V FT-6EV FT-6TS FT-6ETS FT-6S FT-6ES FT-6X FT-6EX FT-6TH FT-6ETH FT-6H FT-6EH FT-6N FT-6EN Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 00 Ω 500 Ω kω kω kω 5 kω 0 kω 0 kω 0 kω 50 kω 00 kω 00 kω 00 kω 500 kω MΩ MΩ Fig. The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in taping unit. A The products indicated by A mark are manufactured upon receipt of order basis. ELECTRICAL CHARACTERISTICS Nominal resistance range Nominal resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical angle End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight 0 Ω ~ MΩ ± 0 % 0.5 W (0 C) 0 W (5 C) Linear law DC00 V or power rating, whichever is smaller Power ratings 0 ( turn) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater 55 ~ 5 C ± / C maximum 000 MΩ minimum (DC500 V) AC00 V, 60 s Approx. 0.5 g (FT-6P, V, EP, EV) Approx g (FT-6S, H, X, N, ES, EH, EX, EN) MECHANICAL CHARACTERISTICS Mechanical angle Operating torque Stop strength Rotational life Terminal strength Thrust to rotor Solderability 60 ( turn) 0 mn m {04 gf cm} maximum 50 mn m {50 gf cm} minimum 50 cycles [ R/R ± ( Ω+ %)] 0 N {.0 kgf} minimum Tensile strength 0 N {.0 kgf} minimum Sn-Pb : 5 C, s Sn (Lead-free) : 45 ± C, ~ s { }Reference only
3 FT-6 ENVIRONMENTAL CHARACTERISTICS Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat Test conditions 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C ( 80 ~ 8 %), 0 cycles, 40 h 8 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 6 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W 000 h 55 C, h 5 C, 50 h 85 C, 60 s 50 C, s Flow soldering 60 ± C, 5 ~ 6 s, Twice Manual soldering 80 ± 0 C, ~ 4 s Specifications [ R/R %] [S.S. %] [ R/R %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] No leaks (No continuous bubbles) [ R/R %] R/RChange in total resistance S.S. Setting stability MAXIMUM INPUT RATINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (ma) A A k k k k k k k k k k k k M M A The products indicated by A mark are manufactured upon receipt of order basis.
4 FT-6 OUTLINE DIMENSIONS FT-6P, FT-6EP Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 5.8 ± FT-6S, FT-6ES Side adjustment 0 60 Nom. 0.W L.6D ± φ 0.45 FT-6X, FT-6EX Side adjustment 0.W L.6D 0 0. Lead-free Identification mark 60 Nom. 8. 0±.5 φ 0.45
5 FT-6 OUTLINE DIMENSIONS FT-6V, FT-6EV Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6H, FT-6EH Side adjustment ± 6 ± Lead-free Identification mark 0 60 Nom. 0.W L.6D 0..5 ± FT-6N, FT-6EN Side adjustment Lead-free Identification mark 0.W L.6D Nom..5.5 ± 8. φ ± 8. φ 0.45
6 FT-6 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6TV, FT-6ETV Top adjustment FT-6TP, FT-6ETP Top adjustment 60 Nom. 0.W L.6D 60 Nom. 0.W L.6D.± max. max..± max. max. 8± ± ±0.5 min. 8± ± ±0.5 6± min ± ±0.5 φ 4±0. 6.5±0.5 φ 4±0..± ±0.0.± ±0.0 FT-6TH, FT-6ETH Side adjustment FT-6TS, FT-6ETS Side adjustment 60 Nom..± 0 0.W L.6D max max..± 60 Nom. 0 0.W L.6D max max. ±0.5.± ±0.5 min ±0.5.5.± ±0.5 6± min ± ±0.5.± ±0.0 φ 4± ±0.5 φ 4±0..± ±0.0
7 FT-6 PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 000 pcs. per reel. Orders will be accepted for units of 000 pcs., i.e., 000, 000, 000 pcs., etc. Tape & reel version contains 000 pcs. in one box. <Vinyl bag packaging specifications> Unit of bulk in vinyl bag packaging is 00 pcs. per pack. Boxing of bulk in vinyl bags is performed with 000 pcs. per box. # terminal Direction of feed Direction of feed Ammo pack type # terminal Ammo Pack Package size: 0 mm 0 mm 45 mm The leader and end of the tape have an empty part of minimum 00 mm respectively. There are two tape outlets on the package for different terminal alignment directions, for which details refer to the sketch above. (e.g.) When the tape is fed from the right outlet marked, # terminal comes out first. Gross weight of the boxing version TV, ETV : Approx. 850 g TH, ETH : Approx. 40 g TP, ETP : Approx. 80 g TS, ETS : Approx. 40 g
SINGLE TURN CERMET TRIMMERS
SINGLE TURN INTERNAL STRUCTURE 4 5!0 9 8 6 FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable 4 5 6 8 9!0 Part name Housing
More informationFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
More informationST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationSM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material
More informationBase S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationCS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More information1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B
CFP RoHS compliant INTERNA STRUCTURE FEATURES Part name Cover Material Flammability Slider Housing Polyamide U94V- Slider contact APPICATIONS Fixed contact Terminal pin Copper alloy, Gold-plated Piano
More informationS-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant
RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationTYPE. 250 ppm / 200 ppm /
FEATURES High power in small packages Available wide range to automatic insertion machine. APPLICATIONS All general purpose power applications. DESCRIPTION A homogeneous film of metal alloy is deposited
More informationNTC Thermistors, Accuracy Line
N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationAD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
More informationMetal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
More information/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More informationFEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationTYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm /
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationFrelTec GmbH. Metal Film Resistor
GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationTURQUOISE SWITCHES V TYPE (ABV)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES V TYPE (ABV) FEATURES Miniature size (33 15.9.3 mm) (99.626.406 inch) Sealed construction for use in adverse environment Sealed construction by epoxy resin
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationR.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/
Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.2.6 No.RC-K-HTS-0001-13 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: RC1/4,1/2 RoHS COMPLIANCE ITEM Product specification contained in this specification are
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More informationPRODUCT: MULTILAYER CERAMIC CAPACITOR
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 12 Page: 1 / 18 PRODUCT: MULTILAYER CERAMIC CAPACITOR TYPE: RADIAL-LEADED TYPE CAPACITOR CUSTOMER: DOC. NO.: D13-00-E-12 Ver.: 12 APPROVED
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
More informationAmerican Zettler AZ742 RELAY Datasheet
American Zettler AZ74 RELAY Datasheet http://www.manuallib.com/american-zettler/az74-relay-datasheet.html FEATURES Dielectric strength 000 Vrms Low height:.7 mm Epoxy sealed version available 0 Amp switching
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationNP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
More informationMultilayer Ceramic Chip Capacitors
SELECTION OF CERAMIC CHIP CAPACITORS JARO Multilayer Ceramic Chip Capacitors offer the most complete range of characteristics and configurations available in the industry. We suggest your selection of
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationWF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationCER Series Controlled ESR Capacitors
CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend
More informationCPTC Thermistor:PT Series
Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationMulti-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
More informationCKD Series Low ESL Feed Through Type
CKD Series Low ESL Feed Through Type Type: CKD110JB CKD310JB CKD510JB CKD610JB CKD61BJB Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read efore using this product SAFETY REMINDERS REMINDERS
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationDATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
More information1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%
, Class 2, 63,, V and 1 V (DC) handbook, 4 columns FEATURES General purpose Coupling and decoupling Space saving. APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationApproval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.
WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability
More informationMultilayer Ceramic Capacitors X7R
Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 104 K 500 N T A C D E F G A C Size Code
More informationC 052 C 272 F 2 G 5 T A Rated Voltage (VDC) 1 = = 200. Capacitance Tolerance 1. D = ±0.5 pf F = ±1% G = ±2% J = ±5% K = ±10%
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in C0G dielectric feature
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationLKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationEpoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE)
1. Scope This specification applies to. 2. Product identification T C R S 1 (1) (2) (3) (4) (5) (6) (7) Part no. Designation: (1) series: TCR represent series number of epoxy-coated solid electrolytic
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationHigh-voltage Ceramic Capacitors (DC250V-6.3kV)
High-voltage Ceramic Capacitors (DC250V-6.kV) DEB Series (Class 2/DC1k-.15kV) Features 1. Small size and high capacitance. 2. Coated with flame-retardant epoxy resin. (equivalent to UL94V-0
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationMultilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationClass 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors
FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or
More informationMultilayer Ceramic Capacitors Y5V
Multilayer Ceramic Capacitors Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 F 104
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationSPECIFICATION FOR APPROVAL
F, NO. 16, Sec. 2 Chung Yang S Rd., Peitou, Taipei, Taiwan. TEL : 88622891202, 886228952201 FAX : 88622891206, 886228956207 www.txccorp.com SPECIFICATION FOR APPROVAL CUSTOMER : PRODUCT TYPE : SMD SEAM
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More information