CFP RoHS compliant INTERNA STRUCTURE FEATURES Part name Cover Material Flammability Slider Housing Polyamide U94V- Slider contact APPICATIONS Fixed contact Terminal pin Copper alloy, Gold-plated Piano lever Piano cover Polyamide U94V- PART NUMER DESIGNATION C F P - 4 1 T Series name No. of bits 2 2 bits bits 44 bits 5 5 bits bits 88 bits 11 bits ON direction 1 Shape of terminal Gull wing Through hole pin Form of packaging (Reel) Structure 1Flat lever (Without seal tape) 2Convex lever (Without seal tape) Please refer to the IST OF PART NUMERS when placing orders.
IST OF PART NUMERS No. of bits ON direction Structure 2 4 5 8 1 Form of packaging Shape of terminals Pieces in package Gull wing Through hole pins CFP-T CFP-M CFP-MC 2 pcs./stick CFP-22T CFP-22M CFP-22MC 2 pcs./stick CFP-1T CFP-1M CFP-1MC 2 pcs./stick CFP-2T CFP-2M CFP-2MC 2 pcs./stick CFP-1T CFP-1M CFP-1MC 4 pcs./stick CFP-2T CFP-2M CFP-2MC 4 pcs./stick CFP-11T CFP-11M CFP-11MC 4 pcs./stick CFP-12T CFP-12M CFP-12MC 4 pcs./stick CFP-41T CFP-41M CFP-41MC pcs./stick CFP-42T CFP-42M CFP-42MC pcs./stick CFP-411T CFP-411M CFP-411MC pcs./stick CFP-412T CFP-412M CFP-412MC pcs./stick CFP-51T CFP-51M CFP-51MC pcs./stick CFP-52T CFP-52M CFP-52MC pcs./stick CFP-511T CFP-511M CFP-511MC pcs./stick CFP-512T CFP-512M CFP-512MC pcs./stick CFP-1T CFP-1M CFP-1MC 2 pcs./stick CFP-2T CFP-2M CFP-2MC 2 pcs./stick CFP-11T CFP-11M CFP-11MC 2 pcs./stick CFP-12T CFP-12M CFP-12MC 2 pcs./stick CFP-81T CFP-81M CFP-81MC 2 pcs./stick CFP-82T CFP-82M CFP-82MC 2 pcs./stick CFP-811T CFP-811M CFP-811MC 2 pcs./stick CFP-812T CFP-812M CFP-812MC 2 pcs./stick CFP-11T CFP-11M CFP-11MC 1 pcs./stick CFP-12T CFP-12M CFP-12MC 1 pcs./stick CFP-111T CFP-111M CFP-111MC 1 pcs./stick CFP-112T CFP-112M CFP-112MC 1 pcs./stick : Not manufactured Verify the above part numbers when placing orders. and magazine version can be supplied only in reel or stick units.
STANDARD SPECIFICATIONS EECTRICA CHARACTERISTICS Operating temp. range Storage temp. range Sealing Net weight Approx..55 g (CFP-2) Approx..8 g (CFP-4) Approx. 1.19 g (CFP-) Approx. 1.9 g (CFP-1) 4 ~ 85 C Non-washable Approx..7 g (CFP-) Approx. 1. g (CFP-5) Approx. 1.54 g (CFP-8) Contact rating Non-switching Switching Minimum Contact resistance Insulation resistance Dielectric strength DC5 V 1 ma DC V, 1 ma DC24 V, 25 ma DC2 mv 1 μa 5 m maximum 1 M (DC1 V) minimum AC5 V, s MECHANICA CHARACTERISTICS ENVIRONMENTA CHARACTERISTICS Operation angle Vibration Amplitude 1.5 mm or Acceleration 98 m/s 2, 1-5 Hz, directions for 1 cycles each Operation force 7 N {.71 kgf} maximum Shock 49 m/s 2, 11 ms, directions for times each Stop strength Solderability Soldering heat 1 N {1.2 kgf} s 245 ± C, 2 ~ s Flow2 ± C, 5 ~ s, two times maximum Reflow255 C (Peak temperature) Please refer to the profile below Manual soldering5 ± 1 C, ~ 4 s oad life Humidity High temp. exposure ow temp. exposure Continuous load 1 cycles, DC ±.5 V, 1 ± 1 ma 1 ~ 5 C, Relative humidity ~ 9 %, 24 h for 1 cycles 85 C, 9 h 4 C, 9 h Shear (Adhesion) 5 N {.51 kgf} 1 s Thermal shock 4 (.5 h) ~ 85 C (.5 h), 5 cycles Substrate bending Width 9 mm, bend mm, 5 s, 1 time Pull-off strength 5 N {.51 kgf} 1 s { } : Reference only Reflow profile for soldering heat evaluation Temperature () 25 2 15 1 18 C 15 C Peak : 25 Over 2 Pre Heating Zone 9 s +5 1 s 5 Heating time Soldering Zone Reflow : two times maximum
OUTINE DIMENSIONS Flat lever, Gull wing Unless otherwise specified, tolerance : ±. (Unit : mm) Flat lever, Through hole pin.25 +.1. min 1. min.7 7.2.25 +.1.2.1. +.1 2.54.15 2.5.5 +.1 2.54.15 2.5 Convex lever, Gull wing.25 +.1. min Convex lever, Through hole pin 1 1.5.9. min 1.5.7 7.2.9.25 +.1.2.1. +.1 2.54.15 2.5.5 +.1 2.54.15 2.5 Part number Schematic No. of bits. dimension Part number Schematic No. of bits. dimension CFP-2 2 CFP- 17.7 CFP- 1.5 CFP-8 8 22.8 CFP-4 4 12. CFP-1 1 27.9 CFP-5 5 15.15 RECOMMENDED P.C.. PAD DIMENSIONS (Unit : mm) SIZE OF P.C.. PROCESSING (Unit : mm) 2.54 (P 1) No. of bits 2.54 (P 1) No. of bits 2.5. 2.5 7.2 1 φ 1
PACKAGING SPECIFICATIONS < packaging specifications> Embossed tape dimensions Reel dimensions (Unit: mm) (Conforms to JIS C 8-) (In accordance with EIAJ ET-72A) End Empty 4 mm min. 2 pitches min. Direction of feed Filled Empty 4 mm min. Head φ ±.8 φ 1±.2 φ ±2 2±.5 25.4±1 (2,, 4, 5 bits).4±1 ( bits) 45.4±1 (8, 1 bits) φ 8±1 (2, 4,, 8 bits) 29.4±1 (2,, 4, 5 bits) 7.4±1 ( bits) 49.4±1 (8, 1 bits) 2 bits, bits, 4 bits, 5 bits bits, 8 bits, 1 bits φ 1.5 +.1 1.1 4.1 2.1 C 1.75.1.5.1 Installation example φ 1.5 +.1 1.1 4.1 2.1 C 1.75.1.5.1 Installation example.2.5 D Direction of feed R.75 +.5 Direction of feed No. of bits 2,, 4, 5 8, 1 24 C 11.5 ±.1 D 2 14.2 ±.1 28.4 ±.1 44 2.2 ±.1 4.4 ±.1 < packaging specifications>