Chimei ABS POLYLAC. Properties Guide.
|
|
- Horace Chester Fletcher
- 6 years ago
- Views:
Transcription
1 Chimei ABS POLYLAC Guide Wah Sin Industrial Pte Ltd 519 Balestier Road #02-02 Le Shantier Singapore Tel : No. 24, Jalan Canggih 7, Taman Perindustrian Cemerlang, Ulu Tiram, Johor, Malaysia Tel:
2 POLYLAC General Purpose ABS Condition Unit PA-707 PA-757 PA-717C PA-727 PA-747 PA-709 High Rigidity, Medium Impact Medium/High Impact Electroplating Grade Impact Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (7090) (6800) (6380) (6870) (5470) (5670) Tensile Elongation ASTM D638 1/8,6 mm/min % Flexural Strength ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (12200) (11200) (10200) (11000) (8800) (9070) Flexural Modulus ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (410000) (380000) (350000) (380000) (320000) (320000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm 14(2.6) 18(3.3) 25(4.6) 23(4.2) 36(6.6) 40(7.4) (Notched) 1/8,23 (ft-lb/in) 14(2.6) 20(3.7) 28(5.2) 26(4.8) 41(7.5) 45(8.4) Melt Flow Index ASTM D ,5Kg g/10min Hardness ASTM D785 1/2 R Scale Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) 105(221) 105(221) 104(219) 105(221) 103(217) 105(221) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 99(210) 99(210) 98(208) 99(210) 97(207) 99(208) Unannealed 88(190) 88(190) 87(189) 88(190) 86(187) 88(190) Flammability UL /16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB
3 POLYLAC High Flow ABS Condition Unit PA-756 PA-756S PA-756H PA-716 PA-746 PA-746H PA-737 PA-726 PA-746Y High Rigidity, High Flow Medium Impact, Flow Flow Medium Impact, High Flow High Impact, High Flow High Impact, Flow Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (6540) (5250) (5670) (6240) (5810) (4960) (5250) (6755) (6380) Tensile Elongation ASTM D638 1/8,6 mm/min % Flexural Strength Flexural Modulus ASTM D790 ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (10770) (8520) (9070) (9920) (9200) (8000) (8400) (979) (9570) 1/4,2.8 mm/min Kg/cm (lb/in2) (370000) (340000) (320000) (340000) (310000) (280000) (280000) (340000) (310000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm 15(2.8) 18(3.3) 8(1.5) 22(4.0) 26(4.8) 25(4.6) 23(4.2) 26(4.8) 29(5.3) (Notched) 1/8,23 (ft-lb/in) 17(3.2) 20(3.7) 10(1.9) 24(4.5) 32(6.0) 30(5.6) 25(4.6) 32(6.0) 33 (6.2) Melt Flow Index ASTM D ,5Kg g/10min Hardness ASTM D785 1/2 R Scale Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) 105(221) 105(221) 105(221) 105(221) 105(221) 104(219) 101(214) 106(223) 105(221) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 99(210) 99(210) 99(210) 99(210) 97(206) 96(205) 93(199) 96(265) 98(208) Unannealed 89(192) 89(192) 89(192) 88(190) 87(189) 86(187) 83(181) 86(187) 87(189) Flammability UL /16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB
4 POLYLAC Extrusion Grade ABS Condition Unit PA-747R PA-747F PA-747S PA-709S PA-747H Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (5960) (6680) (5530) (4950) (6610) Tensile Elongation ASTM D638 1/8,6 mm/min % Flexural Strength ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (10350) (10900) (8800) (8000) (9200) Flexural Modulus ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (350000) (380000) (300000) (280000) (315000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm 38(7.0) 30(5.5) 35(6.5) 39(7.2) 34(6.3) (Notched) 1/8,23 (ft-lb/in) 45(8.5) 37(6.9) 40(7.5) 44(8.1) 51.5(9.4) Melt Flow Index ASTM D ,5Kg g/10min Hardness ASTM D785 1/2 R scale Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) 105(221) 106(223) 103(217) 106(223) 106(223) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 98(208) 99(210) 97(206) 96(205) 97(206) Unannealed 88(190) 89(192) 87(189) 86(187) 86.5(188) Flammability UL /16 HB 1/16 HB 1/16 HB 1/16 HB 1/16 HB
5 POLYLAC Flame Retardant ABS Condition Unit PA-763 PA-763A PA-765 PA-765A PA-765B PA-764 PA-764B Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (5810) (5740) (5530) (5670) (5670) (5250) (6100) Tensile Elongation ASTM D638 1/8,6 mm/min % Flexural Strength ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (8520) (8730) (8800) (9070) (9200) (8360) (9370) Flexural Modulus ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (300000) (300000) (300000) (320000) (340000) (280000) (320000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm 16(3.0) 23(4.2) 18(3.3) 20(3.7) 22(4.0) 12(2.2) 12(2.2) (Notched) 1/8,23 (ft-lb/in) 19(3.5) 25(4.6) 22(4.0) 24(4.4) 26(4.8) 14(2.6) 16(3.0) Melt Flow Index ASTM D ,5Kg g/10min Hardness ASTM D785 1/2 R Scale Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) (194) 92(197) 92(198) 97(208) 101(214) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 92(198) 97(207) 83(181) 85(185) 85(185) 92(198) 93(199) Unannealed 84(183) 88(187) 73(165) 76(169) 76(169) 78(174) 80(176) Flammability UL /16 V-0 1/16 V-1 1/16 V-0 1/12 V-0 1/10 V-0 1/16 V-0 1/10 V-0 1/12 5VB 1/12 5VB 1/8 5VA 1/10 5VA 1/16 V-2 1/10 5VA 1/8 5VA 1/8 5VA 1/16 5VB 1/8 5VA
6 POLYLAC High Heat ABS Condition Unit PA-777B PA-777D PA-777E High Heat, High Impact Heat, Medium Impact Heat Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (6380) (6380) (6530) Tensile Elongation ASTM D638 1/8,6 mm/min % Flexural Strength ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (9200) (9650) (9900) Flexural Modulus ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (310000) (320000) (320000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm 20(3.7) 14(2.6) 11(2.0) (Notched) 1/8,23 (ft-lb/in) 23(4.3) 17(3.2) 12(2.2) Melt Flow Index ASTM D , 10Kg g/10min Hardness ASTM D785 1/2 R Scale Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) 115(239) 125(257) 129(264) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 107(225) 115(239) 120(248) Unannealed 97(207) 105(221) 109(228) Flammability UL /16 HB 1/16 HB 1/16 HB
7 POLYLAC Transparent ABS Condition Unit PA-758 PA-758R Chemical Resistance Tensile Strength ASTM D638 1/8,6 mm/min Kg/cm (lb/in2) (5,740) (5,960) Flexural Strength ASTM D790 1/4,2.8 mm/min Kg/cm (lb/in2) (7,780) (10,200) Flexural Modulus ASTM D790 1/4,2.8 mm/min Kg/cm2 19,000 25,000 (lb/in2) (270,000) (350,000) IZOD Impact Strength ASTM D256 1/4,23 Kg-cm/cm Melt Flow Index ASTM D , 5Kg 220, 10Kg g/10min Specific Gravity ASTM D Vicat Softening Temp. ASTM D1525 1/8,50 /hr ( ) 105(221) 104(219) Annealed (85,8hr) ASTM D648 1/4,120 /hr ( ) 88(190) 86(187) Haze ASTM D1003 1/ Light Transmission ASTM D1003 1/8 % Flammability UL /16 HB 1/16 HB
8 POLYLAC ABS Singapore Malaysia China Japan Philippines Taiwan Thailand USA Wah Sin Industrial Pte Ltd 519 Balestier Road #02-02 Le Shantier Singapore Tel : No. 24, Jalan Canggih 7, Taman Perindustrian Cemerlang, Ulu Tiram, Johor, Malaysia Tel:
Metric (S.I. Units System) English (U.S. Units System) Method PHYSICAL
INECTOBLEND FABS007 General Purpose ABS FABS007 is available in black color only. Further information and details are available upon request Melt Flow Rate @ 230C / 3.8kg, nominal D 1238 1.05 0.40.7 5
More informationDuPont Zenite LCP. liquid crystal polymer resin PRODUCT AND PROPERTY GUIDE
DuPont Zenite LCP liquid crystal polymer resin PRODUCT AND PROPERTY GUIDE DuPont Zenite LCP liquid crystal polymer resin Description Zenite is the DuPont trademark for its liquid crystal polymer (LCP)
More informationMolded/Machined Both Both Machined Machined Both Dielectric Strength V/mil D ,000
Material Properties Properties Units ASTM Test Method ABS Acetal CPVC G10-FR4 Halar (ECTFE) Molded/Machined Both Both Machined Machined Both Dielectric Strength V/mil D-149 812.8 500 1250 400 2,000 Elongation
More informationGENERAL PROPERTIES OF FLOMAT SHEET MOULDING COMPOUND
PAGE: 1 OF 5 PROPERTY TEST METHOD UNITS 512/20 513/15 514/15 515/15 516/25 DENSITY BS-2782-PART 5-509A-1970 gm/cc 1.70-1.90 1.70-1.90 1.70-1.90 1.70-1.90 1.70-1.90 MOULD SHRINKAGE BS-2782-PART 6-640A-1979
More informationInnovative Products February 2016
Bison Pedestals & Accessories Material Testing Test Description Bison Results ASTM D792 ASTM D638 ASTM G155 ASTM G26 ASTM D790 ASTM D256 0 ASTM D5420 50.0 ASTM D2240 ASTM D648 231 ASTM D648 231 ASTM D635
More informationLight Diffuser Plates for LCD-TV Backlight Systems
Light Diffuser Plates for LCD-TV Backlight Systems Sumitomo Chemical Co., Ltd. IT-Related Chemicals Research Laboratory Akiyoshi KANEMITSU Takashi SAKAMOTO Hironobu IYAMA A lighting system called direct
More informationPANDUCT Type E Slotted Wall Wiring Duct
PANDUCT Type E Slotted Wall Wiring Duct Type E Wiring Duct Standard Colors : LG DG WH Light Gray Dark Gray White BL Black IB IntrinsicBlue Colors shown are approximate. Ordering Information: Order number
More informationDigital Materials Data Sheet
Digital Materials Data Sheet RIGID OPAQUE MATERIALS PRIMARY MATERIAL: VEROWHITEPLUS RGD835 SECONDARY MATERIAL: VEROBLACKPLUS RGD875 PRIMARY MATERIAL: VEROBLUE RGD840 RGD8310-DM, RGD8320-DM, RGD8330-DM
More informationSECTION 23 - METRIC DESIGN INFORMATION. Table of Contents
SECTION 23 - METRIC DESIGN INFORMATION Table of Contents Metric System Conversions and Abbreviations... 23-3 EXTREN Availability List... 23-4 EXTREN vs. Traditional Materials... 23-6 SECTION 23 METRIC
More informationNP-180R. U.L. file number E98983
New: 2018/09/12 Flame retardant copper clad laminate NP-180R High Tg 175 (DSC) Excellent dimensional stability through-hole reliability Excellent electrical, chemical and heat resistance properties IPC-4101E
More informationPERFORMANCE TEST REPORT. Rendered to: VELUX AMERICA, INC. PRODUCT: SUN TUNNEL Domes TYPES: Acrylic and Polycarbonate
PERFORMANCE TEST REPORT Rendered to: VELUX AMERICA, INC. PRODUCT: SUN TUNNEL Domes TYPES: Acrylic and Polycarbonate Report No.: E3490.01-106-31 Report Date: 07/13/15 Test Record Retention Date: 06/18/19
More informationMOCK EXAMINATION 1. Name Class Date INSTRUCTIONS
Name Class Date PRIMARY 2 mathematics MOCK EXAMINATION 1 INSTRUCTIONS Total time for Section A, Section B and Section C: 1 hour 45 minutes The use of calculators is not allowed. SECTION A : Multiple Choice
More informationHigh Speed, Low Loss Multi-layer Materials
Data Sheet High Speed, Low Loss Multi-layer Materials Laminate R-5775 Prepreg R-5670 Jun. 2017 No.17061531 Specification / Laminate R-5775 No.; 17061531-1 Property Units Test Method Condition Value Glass
More informationELECTRICAL SOLUTIONS
Ties Panduct Type FL Flexible Material: Flexible Polypropylene UL Recognized continuous use temperature: 9 F (5 C) H W UL 94 flaability rating of V-2 Factory applied adhesive tape provided for easy mounting
More informationNP-175FR. High luminance of multi-functional epoxy contrast with copper
New: 2018/09/12 Flame retardant copper clad laminate NP-175FR Characteristics Unit Conditioning Typical Values SPEC Test Method Volume resistivity MΩ-cm C-96/35/90 5 x10 9 ~ 5x10 10 10 6 2.5.17 Surface
More informationData Sheet. High Speed, Low Loss Multi-layer Materials. Laminate R-5785 Prepreg R-5680
Data Sheet High Speed, Low Loss Multi-layer Materials Laminate R-5785 Prepreg R-5680 Oct. 2018 No.18103128 Specification / Laminate R-5785 & R-5785(N) THERMAL ELECTRICAL PHYSICAL Property Units Test Method
More informationHigh heat resistance halogen-free multi-layer circuit board materials
Data Sheet High heat resistance halogen-free multi-layer circuit board materials Laminate R-1566(S) Prepreg R-1551(S) Mar. 2019 No.19031342 Specification / Laminate R-1566(S) No.; 19031342-1 Property Units
More informationPalm Frond Calculations
Palm Frond Calculations 250 E. Broad Street Suite 500 Columbus, Ohio 43215 Paul J. Ford and Company Job # 33201-0014 Reference PJF Drawing # 33201-0014 Sheet S-3, Dated 02/06/2001 PAGE 1 OF 6 FORMULAS
More informationSizes 48" x 96" (1.22m x 2.44m) Custom sheet sizes available upon request
Applications Decorative paneling Partitions Water features Signage Furniture Displays and more... Attributes Excellent UV properties High impact resistance - 17x greater than glass and 4x greater than
More informationThe TSM-DS. TSM-DS Family of Dimensionally Stable Low Loss Laminates. Benefits & Applications:
The TSM-DS family is comprised of thermally stable, industry leading low loss cores (Df = 0.0010 / 0.0011 [DS/DS3] at 10 GHz) that can be manufactured with the predictability and consistency of the best
More informationPhysical Properties Testing Technical Bulletin
Technical Bulletin MANUFACTURER Raven Lining Systems 13105 E. 61 st Street, Suite A Broken Arrow, OK 74012 (918) 615-0020 TENSILE TESTING OF PLASTICS ASTM D638, ISO 527 Tensile tests measure the force
More informationTypical Properties T Method
CHO-THERM High Power Thermally Conductive Electrical Insulator Pads Description CHO-THERM HIGH-POWER THERMAL INSULATOR PADS are thermally conductive materials designed for use where the highest possible
More informationPD626 Polypro Replacement Material Evaluation and Selection
PD626 Polypro Replacement Material Evaluation and Selection This test data provided is based on representative testing done in the lab and is provided to show the similarities between PD626 and 11R12A
More informationAbstract Process Economics Program Report 51C POLYMER NANOCOMPOSITES (June 2002)
Abstract Process Economics Program Report 51C POLYMER NANOCOMPOSITES (June 2002) With the rush of interest in all things related to nanotechnology, polymer nanocomposites represent one of the emerging
More informationNPGN-150R. FEATURES Halogen, antimony, and red phosphorous free Flammability meets UL 94 V-0 NAN YA PLASTICS CORPORATION
NAN YA PLASTICS CORPORATION Issured : 2010-09-01 flame retardant copper clad laminate Flammability meets UL 94 V-0 Excellent long term reliability UV blocking type NPGN-150R Reactive type flame retardants
More informationRegupol. Vibration
Regupol Vibration 48 www.vibratec.se Standard forms of delivery, ex warehouse Rolls Thickness: 15 mm Length: 1, mm, special length available Width: 1,25 mm Stripping/Plates On request Die-cutting, water-jet
More informationStress Analysis Report
Stress Analysis Report Analyzed File: Majakkarunko.iam Autodesk Inventor Version: 2013 SP2 (Build 170200200, 200) Creation Date: 29.5.2013, 7:01 Simulation Author: NJu Summary: Project Info (iproperties)
More informationDanger of Snow in the Sunshine State
Undergraduate Journal of Mathematical Modeling: One + Two Volume 7 2017 Spring 2017 Issue 2 Article 2 Danger of Snow in the Sunshine State Dmitrii Karpenko University of South Florida Advisors: Arcadii
More informationDo Policy-Related Shocks Affect Real Exchange Rates? An Empirical Analysis Using Sign Restrictions and a Penalty-Function Approach
ISSN 1440-771X Australia Department of Econometrics and Business Statistics http://www.buseco.monash.edu.au/depts/ebs/pubs/wpapers/ Do Policy-Related Shocks Affect Real Exchange Rates? An Empirical Analysis
More informationRegufoam. Vibration 270 Plus.
Regufoam Vibration 27 Plus www.vibratec.se Standard forms of delivery, ex warehouse Rolls Thickness: 12.5 and 25 mm, special thicknesses on request Length: 5, mm, special lengths available Width: 1,5 mm
More informationEngineering Design for Ocean and Ice Environments Engineering Sea Ice Engineering
Engineering 867 - Design for Ocean and Ice Environments Engineering 9096 - Sea Ice Engineering MID-TERM EXAMINATION With Solutions Date: Fri., Feb. 6, 009 Time: 1:00-1:50 pm Professor: Dr. C. Daley Answer
More informationAppendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus
Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D
More informationMaterial Characterization of Natural Fiber Acrylic Thermoset Composites
Material Characterization of Natural Fiber Acrylic Thermoset Composites Andre Bendo Jeremy Funk, John Norton, Dr. Gero Nordmann & Dr. Michael Kalbe BASF Corporation 08/01/2011 1 Presentation verview Key
More informationCBF CCP COPPER FOIL. Product Specification. Both shiny side Copper Foil with equal roughness on the two sides.
CBF L I - I O N B A T T E R Y U S E C O P P E R F O I L Both shiny side Copper Foil with equal roughness on the two sides. Anode material for secondary Li-ion battery. Drum side SEM image μm 8 10 12 Thickness
More informationPFA HP Plus GBK Lining Sheet
Safeguarding process purity Dupont has enhanced Teflon PFA HP in such a way that gives Teflon PFA HP Plus the same unsurpassed purity but have improved mechanical toughness and stress crack resistance,
More informationInstrumented Impact Testing
Prüfen mit Verstand Instrumented Impact Testing Helmut Fahrenholz Agenda Why impact testing? Typical DWT standards Impact methods Energy, speed and mass in DWT Results evaluation acc. standards 2 Why impact
More informationOne Corporate Drive, Suite 106, Bedford, PA USA
DESIGN GUIDE Revised: 4/2012 One Corporate Drive, Suite 106, Bedford, PA 15522-7401 USA Phone: 814-623-8125 Sales Fax: 814-623-6032 Website: www.bedfordreinforced.com E-mail: frpsales@bedfordreinforced.com
More informationEffect of Rubber Content of ABS on the Mechanical Properties of ABS/Clay Nanocomposites
Composite Interfaces 16 (2009) 337 346 www.brill.nl/ci Effect of Rubber Content of ABS on the Mechanical Properties of ABS/Clay Nanocomposites Hyun-Kyo Kim a, Gue-Hyun Kim b,, Byung-Mook Cho b and Chang-Sik
More informationA tribute to Eero Saarinen and the North Chirstian Church
orphosis A tribute to Eero Saarinen and the North Chirstian Church ero mit chapel inspiration I have always remembered one night on my travels as a student when I sat in a mountain village in Sparta.
More informationAnalysis and Design of Rigid Pavement on Collapsible and Expansive Soils
[ VOLUME 5 I ISSUE 2 I APRIL JUNE 2018] E ISSN 2348 1269, PRINT ISSN 2349-5138 Analysis and Design of Rigid Pavement on Collapsible and Expansive Soils Kongan Aryan & A.K. Gupta & Mamta Tiwari, Department
More informationCHAPTER 1 ENGINEERING MECHANICS I
CHAPTER 1 ENGINEERING MECHANICS I 1.1 Verification of Lame s Theorem: If three concurrent forces are in equilibrium, Lame s theorem states that their magnitudes are proportional to the sine of the angle
More informationColor Availability Clear Standard colors stocked (thin gauge only) Custom colors available by special order.
Applications Aquariums Displays Fountains Projection screens Furniture Optical lenses Port hole windows Sight glass Scientific applications Point of purchase Vacuum chambers Bio-safety chambers and more...
More informationCOMPATIBILIZERS VISCOSITY CHAIN EXTENDERS MODIFIERS XIBOND BLEND OPTIMIZERS COUPLING AGENTS SURFACE MODIFIERS
COMPATIBILIZERS CHAIN EXTENDERS VISCOSITY MODIFIERS XIBOND BLEND OPTIMIZERS SURFACE MODIFIERS COUPLING AGENTS XIBOND Blend Optimizers At Polyscope, we offer a wide range of polymer additives for the compounding
More informationIonic liquid CIL-313 for ESD resin compound
Application Note Ionic liquid CIL-313 for ESD resin compound Contents 1. Properties of ionic liquids 2. Application of ionic liquids 3. Molecular structures of some ionic liquids 4. Physical properties
More informationD Y N A M I C M E C H A N I C A L A N A L Y S I S A N D I T S A D V A N T A G E S O V E R D E F L E C T I O N T E M P E R A T U R E U N D E R L O A D
D Y N A M I C M E C H A N I C A L A N A L Y S I S A N D I T S A D V A N T A G E S O V E R D E F L E C T I O N T E M P E R A T U R E U N D E R L O A D Sujan E. Bin Wadud TA Instruments 9 Lukens Drive, New
More information2008 SEAUPG CONFERENCE-BIRMINGHAM, ALABAMA
Introduction Overview M E E Design Inputs MEPDG Where are we now MEPDG Inputs, Outputs, and Sensitivity Southeast Asphalt User Producer Group Bill Vavrik 19 November 2008 2 Implementation Timeframe DARWin
More informationMET 487 Instrumentation and Automatic Controls. Lecture 13 Sensors
MET 87 nstrumentation and utomatic Controls Lecture Sensors July 6-9, 00 Stress and Strain Measurement Safe Load Level monitoring Force (indirect measurement by measuring strain of a flexural element Pressure
More informationMechanical Properties of Polymers. Scope. MSE 383, Unit 3-1. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Mechanical Properties of Polymers Scope MSE 383, Unit 3-1 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Structure - mechanical properties relations Time-dependent mechanical
More informationPeriodic table with the elements associated with commercial polymers in color.
Polymers 1. What are polymers 2. Polymerization 3. Structure features of polymers 4. Thermoplastic polymers and thermosetting polymers 5. Additives 6. Polymer crystals 7. Mechanical properties of polymers
More informationAdvanced/Advanced Subsidiary. You must have: Mathematical Formulae and Statistical Tables (Blue)
Write your name here Surname Other names Pearson Edexcel International Advanced Level Centre Number Mechanics M2 Advanced/Advanced Subsidiary Candidate Number Tuesday 24 January 2017 Morning Time: 1 hour
More information東莞永力電業有限公司 YUNG LI CO., LTD REVISION RECORD YUNG LI. Customer : Parts No. : Draw No. : CY-U0003 TC02CCCCYY-95 CUSTOMER APPROVED
東莞永力電業有限公司 YUNG LI CO., LTD Da Pu Industrial Zone, Gang Zi, Changping Town, Dong Guan City, Guangdong 523571 China.P.R.C TEL:0769-3396797~8 E-mail: sales@yung-li.com FAX:0769-3396796 Description : YP-11/YC-13
More informationDATA SHEET FOR COMPOUND TEV
TEFLON/FEP ENCAPSULATED VITON DATA SHEET FOR COMPOUND TEV Compound Features: Virtually chemically inert encapsulation material. Better elasticity and sealing ability than a solid PTFE O Ring. FDA compliant
More informationTechnical Information ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A. Neoprene Sheets...
Technical Information 2011.1 ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A A Insulation Garfilm... section B B Insulation Nomex Films... section C Neoprene Sheets...
More informationEpoxy resins for electrotechnical applications
Epoxy resins for electrotechnical applications Epoxy resins for electrotechnical applications ELANTAS Europa offers a complete range of of products that can be used in in electrical engineering for the
More informationMuti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
More informationAdvanced/Advanced Subsidiary. You must have: Mathematical Formulae and Statistical Tables (Pink)
Write your name here Surname Other names Pearson Edexcel GCE Centre Number Mechanics M4 Advanced/Advanced Subsidiary Candidate Number Wednesday 15 June 2016 Morning Paper Reference Time: 1 hour 30 minutes
More informationLV-MV INSULATORS INSULATORS
LV-MV INSULATORS LV-MV INSULATORS CONTENTS LOW VOLTAGE & MEDIUM VOLTAGE INSULATORS 0 0 0 0 0 0 0 0 /0 LV Insulators type SK LV Insulators type SR LV Insulators type RD LV Insulators type DS LV Insulators
More informationTheory at a Glance (for IES, GATE, PSU)
1. Stress and Strain Theory at a Glance (for IES, GATE, PSU) 1.1 Stress () When a material is subjected to an external force, a resisting force is set up within the component. The internal resistance force
More informationTEST REPORT No. : XMML Date : Apr. 26, 2010 Page : 1 of 15
Page : 1 of 15 COSMOS GRANITE & MARBLE 501 S. NEW HOPE ROAD, RALEIGH, NC 27610 USA The following sample(s) was/were submitted and identified on behalf of the client as: Sample Name : SL2001 SGS Ref. No.
More informationPolyvinyl chloride PVC *
Polyvinyl chloride PVC * The polyvinyl chloride, abbreviated PVC, is one of the oldest synthetic polymeric compounds (e.g. epoxy resin is a polymeric compound). Some important properties of the material
More informationIndentation cracking of glass II: Relationship between crack resistance and equibiaxial flexural strength
ndentation cracking of glass : Relationship between crack resistance and equibiaxial flexural strength S. Yoshida 1, T. Shimizu 1, Y. Kato 2, H. Yamazaki 2, J. Matsuoka 1 1 The University of Shiga Prefecture,
More informationStatics Principles. The laws of motion describe the interaction of forces acting on a body. Newton s First Law of Motion (law of inertia):
Unit 2 Review Statics Statics Principles The laws of motion describe the interaction of forces acting on a body Newton s First Law of Motion (law of inertia): An object in a state of rest or uniform motion
More informationMicrostructural Characterisations and Mechanical Properties of Compatibilized Polyamide 6/Polypropylene/Organoclay Nanocomposites
Microstructural Characterisations and Mechanical Properties of Compatibilized Polyamide 6/Polypropylene/Organoclay Nanocomposites W.S.CHOW 1, Z.A. MOHD ISHAK 1 and J. KARGER-KOCSIS 2 1 School of Materials
More informationPlastics Interlaboratory Testing Program
Collaborative Testing Services, Inc. Plastics Interlaboratory Testing Program Web Summary, About CTS and the Plastics Interlaboratory Program Key for Web Summary Report Results Summary for this Report
More informationInstrumented Pendulum Impact Testing for Plastics
Prüfen mit Verstand Instrumented Pendulum Impact Testing for Plastics testxpo 2015 Instrumented Impact Testing Agenda Pendulum Impact Testing - Basics Instrumented Impact Testing Tests and Curves Summary
More information1.3 Working temperature T 200,0 1.4 Working environment. F... Guided seating. Light service. Cold formed springs. Music wire ASTM A228
Helical cylindrical compression spring of round wires and bars i ii? 1.0 Calculation without errors. Project information Input parameters section Selection of load conditions, spring operational and production
More informationEffects of Basalt Fibres on Mechanical Properties of Concrete
Effects of Basalt Fibres on Mechanical Properties of Concrete A. M. El-Gelani 1, C.M. High 2, S. H. Rizkalla 3 and E. A. Abdalla 4 1,4 University of Tripoli, Civil Engineering Department, Tripoli, Libya
More informationCOPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment
More informationMELT FLOW INDEX (MFI)
MELT FLOW INDEX (MFI) The melt flow index (MFI) is a measure of the ease of flow of the melt of a thermoplastic polymer. It is defined as the mass of polymer, in grams, flowing in ten minutes through a
More informationGUIDE TO UNDERSTANDING ASTM D2000 SPECIFICATIONS
California Gasket and Rubber Corporation 533 W. Collins Ave. Orange, CA 92867 (714) 202-8500 Phone (714) 639-0586 Fax www.calgasket.com GUIDE TO UNDERSTANDING ASTM D2000 SPECIFICATIONS ASTM D2000 is a
More informationA Project on Wear and its Relation to Ball Valves. A project for MANE 6960 By Robert Sayre Submitted 12/9/2013
A Project on Wear and its Relation to Ball Valves A project for MANE 6960 By Robert Sayre Submitted 12/9/2013 Introduction Ball valves have many possible applications; they typically have low pressure
More informationStandard Test Methods for Glass-Bonded Mica Used as Electrical Insulation 1
Designation: D 1039 94 (Reapproved 1999) e1 An American National Standard Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation 1 This standard is issued under the fixed designation
More informationSUMMARY OF OFFICIAL TEST REPORTS
SUMMARY OF OFFICIAL TEST REPORTS 2014 TABLE OF CONTENTS Manufactured by: SPM Thermo-Shield Inc. (USA) Tel.: 001-239-234-5832 Email: spm@thermoshield.com Fax: 001-239-236-6767 www.thermoshield.com Thermal
More informationInfrared Optical Material - CaF 2
Optics Application Infrared - CaF 2 Calcium Fluoride is used for optical windows, lenses and prisms in the 0.15 μm - 9 μm (ultraviolet to infrared) regions. The low power absorption has made this material
More informationChange in physico-mechanical and thermal properties of polyamide / silica nanocomposite film
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 7, Issue 6 (June 2013), PP. 01-05 Change in physico-mechanical and thermal properties
More informationCMY. SCIENCE (CHEMISTRY) See C. P. B.Sc. Hons., Dip.Ed. A. B. Terence B.Sc., M.Ed., M.A. (IDT), PGDE
02 OL QEN Sci Chemistry ttp_b&w.pdf 1 26/9/2017 10:56:41 AM C M Y CM MY CY CMY K SCIENCE (CHEMISTRY) See C. P. B.Sc. Hons., Dip.Ed. A. B. Terence B.Sc., M.Ed., M.A. (IDT), PGDE Quick Exam Notes SCIENCE
More informationSimulation of Geometrical Cross-Section for Practical Purposes
Simulation of Geometrical Cross-Section for Practical Purposes Bhasker R.S. 1, Prasad R. K. 2, Kumar V. 3, Prasad P. 4 123 Department of Mechanical Engineering, R.D. Engineering College, Ghaziabad, UP,
More informationPREPARATION AND STRUCTURE OF NANOCOMPOSITES BASED ON ZINC SULFIDE IN POLYVINYLCHLORIDE
Journal of Non - Oxide Glasses Vol. 10, No. 1, January - March 2018, p. 1-6 PREPARATION AND STRUCTURE OF NANOCOMPOSITES BASED ON ZINC SULFIDE IN POLYVINYLCHLORIDE M. A. RAMAZANOV a*, Y. BABAYEV b a Baku
More informationLow Dk/Df Polyimide Adhesives for Low Transmission Loss Substrates
Tasaki et al.: Low Dk/Df Polyimide Adhesives for Low Transmission Loss Substrates (1/7) [Technical Paper] Low Dk/Df Polyimide Adhesives for Low Transmission Loss Substrates Takashi Tasaki, Atsushi Shiotani,
More informationPC3SD21NTZ Series. VDRM : 600V Zero cross type DIP 6pin Phototriac Coupler for triggering
PCSDNTZ Series Non-zero cross type is also available. (PCSDNTZ Series) VDRM : 00V Zero cross type DIP pin Phototriac Coupler for triggering Description Phototriac Coupler include an infrared emitting diode
More informationThe Development Of A High Temperature And Acid Resistant Fire Retardant Resin
The Development Of A High Temperature And Acid Resistant Fire Retardant Resin Bruce Curry October 3-6, 2001 ABSTRACT Composites made with polyester and vinyl ester res- ins are resistant to acidic environments.
More informationEngineering Composite Reinforcements
Facing up to the Challenges of Natural Fibres as Potential Engineering Composite Reinforcements Jim Thomason Composites Week @Leuven September 16-20 th 2013 Leuven, Belgium Jim why are you so down on Natural
More informationFunctionalization of Multi-walled Carbon Nanotube by Treatment with Dry Ozone Gas for the Enhanced Dispersion and Adhesion in Polymeric Composites
Carbon Letters Vol. 11, No. 4 December 2010 pp. 298-303 Functionalization of Multi-walled Carbon Nanotube by Treatment with Dry Ozone Gas for the Enhanced Dispersion and Adhesion in Polymeric Composites
More informationA Complete Guide to Epoxy Terminology
A Complete Guide to Epoxy Terminology A-Stage: An early stage in the reaction of certain thermosetting resins in which the material is fusible and still soluble in certain liquids. Adhesive: A substance
More informationOverview of Maleic-Anhydride-Grafted Polyolefin Coupling Agents
Overview of Maleic-Anhydride-Grafted Polyolefin Coupling Agents A guide to understanding their uses, benefits, functions, selection, and developments Louis W. Martin, Addcomp North America Inc. Fundamentals
More informationResponse Surface Models for Optimization of Wheat Straw- Polypropylene Composite Formulations
Proceedings of the 014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 014 Response Surface Models for Optimization of Wheat Straw- Polypropylene
More informationOPTIMISATION ON PROPERTY ENHANCEMENT OF POLYPROPYLENE/ORGANOCLAY NANOCOMPOSITES
6 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS OPTIMISATION ON PROPERTY ENHANCEMENT OF Yu Dong*, Debes Bhattacharyya*, Peter J. Hunter** *Centre for Advanced Composite Materials (CACM), **The Bioengineering
More informationKeywords: mechanical property, polymer optical fibre, radiation, transmission.
5 th Australasian Congress on Applied Mechanics, ACAM 27 1-12 December 27, Brisbane, Australia Radiation damage to polymer optical fibres C. Yan 1, S.H. Law 2, N. Suchowerska 3,4 and S.H. Hong 5 1 School
More informationSolution to Multi-axial Fatigue Life of Heterogenic Parts & Components Based on Ansys. Na Wang 1, Lei Wang 2
5th International Conference on Information Engineering for Mechanics and Materials (ICIMM 215) Solution to Multi-axial Fatigue Life of Heterogenic Parts & Components Based on Ansys Na Wang 1, Lei Wang
More informationRigid pavement design
Rigid pavement design Lecture Notes in Transportation Systems Engineering Prof. Tom V. Mathew Contents 1 Overview 1 1.1 Modulus of sub-grade reaction.......................... 2 1.2 Relative stiffness
More informationTechnical Note PP TN Engineering Considerations for Temperature Change
Technical Note PP 814 - TN Engineering Considerations for Temperature Change www.performancepipe.com Like most materials, polyethylene is affected by temperature change. However, polyethylene s response
More informationClass 3 8/31/10. Friday, August 27 th. Mass & Volume Flow Rate Chemical Composition
Class 3 Friday, August 27 th Which of the following cannot be linearized? (P is in mm Hg and T is in degrees Celsius, m, a, b and c are constants). The concentrations of [H 2 ], [Br 2 ], and [H 2 O] are
More informationAsia. JigsawGeo. Free Printable Maps for Geography Education. Try our geography games for the ipod Touch or iphone.
Free Printable Maps for Geography Education Map with region names shown Map without names, for coloring or quizzes Map with coordinate system, for location practice Answer key for coordinate system quiz
More information[5] Stress and Strain
[5] Stress and Strain Page 1 of 34 [5] Stress and Strain [5.1] Internal Stress of Solids [5.2] Design of Simple Connections (will not be covered in class) [5.3] Deformation and Strain [5.4] Hooke s Law
More informationPOE Practice Test - Materials
Class: Date: POE Practice Test - Materials Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A student weighs 150 lbs and is standing on a beam which spans
More informationDiClad Series. PTFE/Woven Fiberglass Laminates. Features: Extremely Low Loss Tangent Excellent Dimensional Stability Product Performance Uniformity
MICROWAVE MATERIALS DiClad Series PTFE/Woven Fiberglass Laminates Features: Extremely Low Loss Tangent Excellent Dimensional Stability Product Performance Uniformity Benefits: Electrical Properties Are
More informationREADY TO SCRAP: HOW MANY VESSELS AT DEMOLITION VALUE?
READY TO SCRAP: HOW MANY VESSELS AT DEMOLITION VALUE? August 206 VesselsValue Global number of vessels at demolition value At scrap value 7,27 6 Above scrap value,8 84 Number of vessels at demolition value
More informationProduct Selector Guide
Product Selector Guide Encapsulation and casting systems ARALDITE, ARADUR, ARATHERM, ARATHANE www.electrical-insulation-materials.com Encapsulation and casting systems ARALDITE, ARADUR, ARATHERM, ARATHANE
More informationThermal Management Solutions For Electronics. For. Cooler. More Reliable Devices
Thermal Management Solutions For Electronics For Cooler More Reliable Devices 3M Thermal Management Solutions for Electronics Transfer Tapes This range of high adhesion thin tapes offers efficient thermal
More informationMaterial Testing Report SN 7131 ISOFIL HK 30 TTH0 WT0822
Material Testing Report SN 7131 ISOFIL HK 30 TTH0 WT0822 Prepared for: SIRMAX SPA Via Dell Artigianato 42 Cittadella 35013 Italy Prepared by: Autodesk Moldflow Plastics Labs 2353 N. Triphammer Rd. Ithaca,
More information