DWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
|
|
- Andrew Mathews
- 6 years ago
- Views:
Transcription
1 DMENONL CLOG B-DW ipe and Fittings C-DW ipe and Fittings C ewer ipe C chedule 30 DW hin Wall 3.25 in. O.D. ipe and Fittings (Updated March 23, 2011) DW DC-DW Charlotte ipe and Foundry Company
2 lastic DW ipe and Fitting Dimensions ll products manufactured by Charlotte ipe and Foundry Company are proudly made in the U...
3 able of Contents age B Foam Core chedule-40 DW ipe Data...4 C Foam Core chedule-40 DW ipe Data...5 ReC chedule 40 DW ipe Data...6 C chedule 40 DW ipe Data...7 D 3034 C ewer ipe Data...8 C D 2729 ewer and Drain ipe Data...9 C and B DW Fittings Dimensions C hin Wall ch. 30 ipe Data...53 C hin Wall ch. 30 Fittings Dimensions Warranty...60 his catalog accurately reflects dimensional information to the best of our knowledge. f the dimensions on your job are critical, please verify dimensional information with our factory. his dimensional catalog accurately reflects our product line at the time the catalog was printed. However, we add and delete items on an ongoing basis to better serve our customers. lease refer to our current list price sheets for an accurate listing of items offered. Charlotte ipe products are manufactured to the applicable M standard. Charlotte ipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte ipe and Foundry. Charlotte ipe and ReC are registered trademarks of Charlotte ipe and Foundry Company.
4 ipe Data B Foam Core ipe B chedule 40 DW ipe (For Non-ressure pplications) B CHEDULE 40 FOM CORE (BLCK) LN END M F 628 MN. W. ER R NO. NOM. ZE UC # QY. ER G. OD WLL 100 F KD (N.) (N.) (LB.) B x B x B x B x B x B x B x B x B x B x NF Listed. Meets ll Requirements of M F 628. NO FOR REURE Do not use C / B cellular core (foam core) pipe for pressure applications. he use of cellular core pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D
5 ipe Data C Foam Core ipe C chedule 40 DW ipe (For Non-ressure pplications) C CHEDULE 40 FOM CORE (WHE) LN END M F 891 MN. W. ER R NO. NOM. ZE UC # QY. ER G. OD WLL 100 F KD (N.) (N.) (LB.) C x C x C x C x C x C x C x C x C x C x C x C x C x C CHEDULE 40 FOM CORE (WHE) BELL-END MN. W. ER R NO. NOM. ZE UC # QY. ER G. OD WLL 100 F KD (N.) (N.) (LB.) C 4300B 3 x C 4400B 4 x C 4400B 4 x C 4600B 6 x NOE: When ordering, please specify plain end or bell end. NF Listed. Meets ll Requirements of M F 891. NO FOR REURE Do not use C / B cellular core (foam core) pipe for pressure applications. he use of cellular core pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D C - D W E 5
6 ipe Data ReC DW ipe ReC is a registered trademark of Charlotte ipe and Foundry Company. C chedule 40 DW ipe with Recycled Content (For Non-ressure pplications) C CHEDULE 40 (WHE) LN END M F 1760 MN. W. ER R NO. NOM. ZE UC # QY. ER G. OD WLL 100 F KD (N.) (N.) (LB.) C x C x C x C x C x C x NF Listed. Meets ll Requirements of M D 4396 and M F ll products manufactured by Charlotte ipe and Foundry Company are proudly made in the U... esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D
7 ipe Data C chedule 40 DW ipe C chedule 40 DW ipe C CHEDULE 40 (WHE) LN LN END END C C M M D 2665 D 2665 W. ER R NO. NOM. ZE UC # QY. ER G. OD MN. WLL 100 F KD (N.) (N.) (LB.) C 7100* x C 7100* x C 7112* x C 7112* x C 7200* 2 x C 7200* 2 x C x C 7300* 3 x C 7300* 3 x C x C x C x C x C x C x C x C x C x C x * Dual Marked M D 1785 & M D riple Marked M D 1785 & M D 2665 & M F 480. Dual Marked M D 1785 & M F 480. NF Listed. Meets ll Requirements of M D 1784, M D 1785, and M D esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D C - D W E 7
8 ipe Data C ewer ipe C DR 35 M ipe M D 3034 & M F 477 DR-35 GKEED - 46 R NO. NOM. ZE UC # QY. ER LYNG W. ER G. OD MN. WLL KD LENGH 100 F. (LB.) (N.) (N.) /M 6004G 4 x /M 6004G 4 x /M 6006G 6 x /M 6006G 6 x /M 6008G 8 x Weight is approximate and is for shipping purposes only. DR-35 OLEN WELD - 46 R NO. NOM. ZE UC # QY. ER LYNG W. ER G. OD MN. WLL KD LENGH 100 F. (LB.) (N.) (N.) /M x /M x /M x /M x Weight is approximate and is for shipping purposes only. Meets ll Requirements of M D DR 35 Gaskets meet or exceed M F 477. Gasketed joints meet M D NO FOR REURE Do not use C ewer pipe for pressure applications. he use of sewer pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D
9 ipe Data C ewer and Drain ipe C M D 2729 ipe OLEN WELD BELLED END M D 2729 R NO. NOM. ZE UC # QY. ER G. OD MN. WLL BELL DEH W. ER KD (N.) (N.) (N.) 100 F. (LB.) C x C x erforated C M D 2729 ipe OLEN WELD BELLED END M D 2729 R NO. NOM. ZE UC # QY. ER G. OD MN. WLL BELL DEH W. ER KD (N.) (N.) (N.) 100 F. (LB.) C x C x erforated pipe is supplied with two rows of 1/2 diameter holes every five inches. Rows are parallel to the pipe axis and are 120 apart. C E W ER Weight is approximate and is for shipping purposes only. ipe listed in this section meets or exceeds the requirements of MD E ll products manufactured by Charlotte ipe and Foundry Company are proudly made in the U... NO FOR REURE Do not use C ewer pipe for pressure applications. he use of sewer pipe in pressure applications may result in system failure and property damage. Failure to follow safety precautions may result in misapplication or improper installation and testing which can cause severe personal injury and / or property damage. rimers and cements are extremely flammable and may be explosive. Do not store or use near heat or open flame, or death or serious injury may occur. olvent fumes created during the joining process are heavier than air and may be trapped in newly installed piping systems. gnition of the solvent vapors caused by spark or flame may result in injury or death from explosion or fire. Read and obey all manufacturers' warnings and any instructions pertaining to primers and cements. rovide adequate ventilation to reduce fire hazard and to minimize inhalation of solvent vapors when working with cements, primers and new piping systems. 9
10 C and B DW Fittings HUB DMENON B D C D
11 C and B DW Fittings R NO. 100 Coupling HUB X HUB ZE B R NO. 101 ZE Female dapter F X HUB C & B D W F N LBLE N C ONLY 11 G
12 C and B DW Fittings R NO. 102 ipe ncreaser Reducer HUB X HUB ZE N x x x x x x x x x x x x x x x R NO. 103 rap dapter Male, Less Washer & Metal Nut GO X L ZE x LBLE N C ONLY 12
13 C and B DW Fittings R NO rap dapter Male, with Washer & lastic Nut GO X L ZE x R NO. 103-R rap dapter Male, with lastic Nut & Washer & x Washer ZE GO X L W/LC NU 3 R NO. 103-X rap dapter Male, with Washer & Chrome Nut GO X L ZE x R NO. 104 rap dapter Female NOE: NO MLE DER. ZE x HUB X L C & B D W F N LBLE N C ONLY 13 G
14 C and B DW Fittings R NO rap dapter Female, with Washer & lastic Nut ZE x R NO. 104-X HUB X L rap dapter Female, with Washer & Chrome Nut ZE x HUB X L R NO. 104-R* rap dapter Female, with lastic Nut & Washer & x Washer ZE HUB X L W/LC NU 3 * B ONLY R NO. 105 Fitting Cleanout dapter GO X F ZE B LBLE N C ONLY 14
15 C and B DW Fittings R NO. 105-X Fitting Cleanout dapter with Cleanout lug ZE GO X F For dimensions see part numbers 105 and 106. R NO. 106 Cleanout lug M ZE B * *B ONLY C & B D W F LBLE N C ONLY 15 N G
16 C and B DW Fittings R NO. 107 Flush Bushing GO X HUB ZE C x x x x x x x x x x x x x x x x R NO. 108 Flush Bushing (Cleanout dapter) GO X F ZE C 2 x x x x C 108, 8 x6 is available only as a component part of C 444-X LBLE N C ONLY 16
17 C and B DW Fittings R NO. 108-X Flush Bushing (Cleanout dapter) with lug GO 10 x 8 12 x 8 For dimensions see part numbers 106 and 108. R NO. 109 Male dapter M X HUB NOE: NO R DER. WLL NO CCE L ECE. ZE EE R NUMBER x (Octagon shoulders for tightening purposes.) R NO. 110 Flush Cleanout lug ZE C & B D W F N LBLE N C ONLY 17 G
18 C and B DW Fittings R NO. 111 Male Fitting dapter M X GO ZE B R NO. 114* ZE R NO. 116 hreaded Cap F 3 4 * B ONLY Cap OCKE ZE C R NO. 117 dapter Coupling D EWER ND DRN GO O DW GO ZE 4 x x HUB X HUB LBLE N C ONLY 18
19 C and B DW Fittings R NO. 118 dapter Bushing D DW HUB O EWER ND DRN GO DW GO X HUB ZE B R NO. 119 No-Hub dapter D C RON NO-HUB GO O DW GO GO X HUB ZE x x R NO. 122 pigot dapter, Cast ron D C RON GO O DW GO HUB X HUB ZE 2 x x x C & B D W F N LBLE N C ONLY 19 G
20 C and B DW Fittings R NO. 123 Hub dapter, Cast ron D DW GO O C RON HUB HUB X GO ZE 2 x x x R NO. 123-R Hub dapter, Cast ron, ncreaser D DW GO O C RON HUB HUB X GO ZE x x 4 4 lain End: Joint can be made with compression gasket only. R NO. 130 Repair Coupling HUB X HUB ZE LBLE N C ONLY 20
21 C and B DW Fittings R NO. 131* est Cap ZE * nserts into pipe. R NO. 132** Outside Diameter est Cap ZE ** nserts over pipe. R NO. 133*** Expansion Joint HUB X HUB ZE *** nstall in neutral position. Fitting has 1 travel in each direction. C & B D W F N LBLE N C ONLY 21 G
22 C and B DW Fittings R NO /4 Bend NRY 90 ELL LL HUB ZE Fabricated from two molded components R NO hort 1/4 Bend 90 ELL LL HUB B ZE 10* * * Not sanitary pattern R NO. 300-R 1/4 Bend, Reducing LL HUB ZE B 2 x LBLE N C ONLY 22
23 C and B DW Fittings R NO /4 Bend with ide nlet HUB X HUB 3 x 3 x x 3 x R NO /4 Bend, treet NRY 90 REE ELL GO X HUB ZE B R NO /4 Bend, with Low Heel nlet LL HUB ZE B 3 x 3 x x 3 x x 4 x C & B D W F N LBLE N C ONLY 23 G
24 C and B DW Fittings R NO. 304 Long weep 1/4 Bend HUB X HUB ZE R NO. 305 Long weep 1/4 Bend with High Heel nlet LL HUB 3 x 3 x R NO. 307 Long weep 1/4 Bend with Low Heel nlet LL HUB ZE B 3 x 3 x R NO. 309 Long weep 1/4 Bend, treet HUB X GO ZE B LBLE N C ONLY 24
25 C and B DW Fittings R NO /4 Bend, treet with Low Heel nlet HUB X GO X HUB 3 x 3 x R NO. 311 Long weep 1/4 Bend, with ide nlet LL HUB 3 x 3 x R NO /6 Bend 60 ELL HUB X HUB ZE C & B D W F N LBLE N C ONLY 25 G
26 C and B DW Fittings R NO /6 Bend, treet 60 REE ELL HUB X GO ZE B R NO /8 Bend 45 ELL HUB X HUB ZE R NO /8 Bend 45 ELL HUB X HUB B ZE LBLE N C ONLY 26
27 C and B DW Fittings R NO /8 Bend, treet 45 REE ELL GO X HUB ZE B R NO /16 Bend ELL HUB X HUB ZE C & B D W F N LBLE N C ONLY 27 G
28 C and B DW Fittings R NO /16 Bend, treet REE ELL GO X HUB ZE B R NO. 327 Double 1/4 Bend LL HUB ZE B x x R NO. 329 Closet Bend, Reducing HUB X HUB ZE B 3 x R NO. 330 Closet Bend, Reducing HUB X GO ZE B 3 x LBLE N C ONLY 28
29 C and B DW Fittings R NO. 330-X* Closet Bend, Reducing with est Cap HUB X GO ZE B 3 x * B ONLY R NO. 331 ent Ell 90 HOR URN ELL HUB X HUB ZE R NO. 333 ent Ell, treet 90 HOR URN REE ELL HUB X GO ZE B C & B D W F N LBLE N C ONLY 29 G
30 C and B DW Fittings R NO. 400 anitary ee LL HUB ZE B R NO traight ee LL HUB E 10* * * Not sanitary pattern LBLE N C ONLY 30
31 C and B DW Fittings R NO. 401 anitary ee, Reducing LL HUB 2 x x x x x 2 x x 3 x x 3 x x 4 x x 4 x x 4 x x 6 x x 8 x x 8 x R NO. 401 ee, Reducing LL HUB E 10x10x8* x12x8* x12x10* x 10 x 4* x 10 x 6* x 12 x 6* *Not sanitary pattern C & B D W F N LBLE N C ONLY 31 G
32 C and B DW Fittings R NO. 403 anitary ee, treet GO X HUB X HUB R NO. 404 anitary ee, treet Reducing GO X HUB X HUB 2 x x 1 1 2* x x 2* x 2 x x 3 x x 3 x x 4 x * B ONLY R NO. 416 anitary ee with Left ide nlet LL HUB 3 x 3 x 3 x x 3 x 3 x x 4 x 4 x LBLE N C ONLY 32
33 C and B DW Fittings R NO. 417 anitary ee with Right ide nlet LL HUB 3 x 3 x 3 x x 3 x 3 x x 4 x 4 x R NO. 418 anitary ee with Left & Right ide nlets LL HUB 3 x 3 x 3 x 2 x x 4 x 4 x 2 x R NO. 428 Double anitary ee NRY CRO LL HUB ZE B C & B D W F N LBLE N C ONLY 33 G
34 C and B DW Fittings R NO. 429 Double anitary ee, Reducing NRY CRO LL HUB 2 x 2 x x x 3 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x R NO. 431 Double anitary ee treet, Reducing NRY CRO GO X HUB X HUB X HUB 3 x 3 x x R NO. 438 Double anitary ee with ide nlet NRY CRO LL HUB 3 x 3 x 3 x 3 x x 4 x 4 x 4 x LBLE N C ONLY 34
35 C and B DW Fittings R NO. 439 Double anitary ee with Left & Right ide nlets NRY CRO LL HUB 3x3x3x3x2x x4x4x4x2x R NO. 441 ent ee LL HUB ZE B C 441, 6 is available only as a component part of C 444-X C & B D W F N LBLE N C ONLY 35 G
36 C and B DW Fittings R NO. 444-X Cleanout ee with Cleanout lug HUB X HUB X F x x x ee art No. 106 for plug dimensions. R NO. 445 Cleanout ee HUB X HUB X F x 10 x x 12 x R NO. 445-X Flush Cleanout ee with Cleanout lug For dimensions see art Numbers 445 and 110. LBLE N C ONLY 36
37 C and B DW Fittings R NO. 447 Horizontal win ee LL HUB D 3 x 3 x x R NO. 448 wo-way Cleanout LL HUB ZE R NO. 449 anitary ee with 2 Left Hand anitary nlet On Center LL HUB ZE B C & B D W F N LBLE N C ONLY 37 G
38 C and B DW Fittings R NO. 500 Double Fixture Fitting LL HUB x x x x x 2 x 2* x 2 x x x 2 x 3 x 3* *B ONLY R NO. 501 Combination Wye & 1/8 Bend ONE ECE LL HUB R NO. 502 Combination Wye & 1/8 Bend, Reducing ONE ECE LL HUB 2 x x x 2 x x 3 x x 3 x x 4 x x 4 x
39 C and B DW Fittings R NO. 503 Combination Wye & 1/8 Bend WO ECE LL HUB 6** ** ** ** R NO. 504 Combination Wye & 1/8 Bend, Reducing WO ECE LL HUB 6 x 6 x 3** x 6 x 4* x 8 x 4** x 8 x 6** x 10 x 4** x 10 x 6** x 10 x 8** x 12 x 4** x 12 x 6** x 12 x 8** x 12 x 10** * One piece short pattern ** Fitting shipped with any required bushing(s) installed, street 1/8 bend strapped to fitting. ssembled from molded components. C & B D W F N LBLE N C ONLY 39 G
40 C and B DW Fittings R NO. 507 Double Combination Wye & 1/8 Bend HREE ECE or FE ECE LL HUB x 2 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x x 6 x 4 x 4** ** Fitting shipped with any required bushing(s) installed, street 1/8 bend strapped to fitting. ssembled from molded components. R NO. 515 Combination Wye & 1/8 Bend with Left ide nlet LL HUB D E 3 x 3 x 3 x LBLE N C ONLY 40
41 C and B DW Fittings R NO. 516 Combination Wye & 1/8 Bend with Right ide nlet LL HUB D E 3 x 3 x 3 x R NO. 517 Combination Wye & 1/8 Bend with Left & Right ide nlets LL HUB D E 3x3x3x2x C & B D W F N LBLE N C ONLY 41 G
42 C and B DW Fittings R NO. 600 Wye 45 WYE LL HUB R NO. 600 Wye LL HUB ZE C E LBLE N C ONLY 42
43 C and B DW Fittings R NO. 601 Wye, Reducing 45 WYE LL HUB 2 x x x x x 2 x x 3 x x 3 x x 4 x x 4 x x 4 x x 6 x x 6 x x 8 x x 8 x R NO. 601 Wye, Reducing LL HUB 10 x 10 x x 10 x x 10 x x 12 x x 12 x x 12 x x 12 x C & B D W F N LBLE N C ONLY 43 G
44 C and B DW Fittings R NO. 602 Wye, treet 45 WYE GO X HUB X HUB R NO. 603 Wye, treet, Reducing 45 WYE GO X HUB X HUB 3 x 3 x x 3 x x 4 x x 4 x R NO. 611 Double Wye DOUBLE 45 WYE LL HUB LBLE N C ONLY 44
45 C and B DW Fittings R NO. 612 Double Wye, Reducing DOUBLE 45 WYE LL HUB 2 x 2 x x x 3 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x x 6 x 4 x R NO. 625 Wye with Left ide nlet LL HUB D E 3 x 3 x 3 x x 4 x 4 x C & B D W F N LBLE N C ONLY 45 G
46 C and B DW Fittings R NO. 626 Wye with Right ide nlet LL HUB D E 3 x 3 x 3 x x 4 x 4 x R NO. 700 Return Bend HUB X HUB R NO. 704-* ail iece dapter with lastic Nut & acking Ring GO X L ZE *B ONLY LBLE N C ONLY 46
47 C and B DW Fittings R NO. 706-X -rap with olvent Weld Joint HUB X HUB R NO. 707-X -rap with Cleanout & olvent Weld Joint HUB X HUB R NO rap with Union & lastic Nut HUB X HUB R NO. 708-X -rap with Union & Chrome Nut HUB X HUB C & B D W F N LBLE N C ONLY 47 G
48 C and B DW Fittings R NO. 709-X -rap with Cleanout, Union & Chrome Nut HUB X HUB R NO L.. attern -rap with Union & lastic Nut L X HUB R NO. 711-X L.. attern -rap with Union & Chrome Nut L X HUB R NO. 720-X Drum rap HUB X HUB ZE B 3 x 6 x LBLE N C ONLY 48
49 C and B DW Fittings R NO. 800 & 800-KO Closet Flange HUB END 4 x x 4* *800-KO, 4 x4 not available in B R NO. 801 Closet Flange, Reducing GO D 4 x R NO. C 810-K Closet Flange, djustable with lastic Ring HUB END 4 x R NO. B 811-* Closet Flange, djustable with lastic Ring HUB END 4 x x *B ONLY C & B D W F N LBLE N C ONLY 49 G
50 C and B DW Fittings R NO. 811 Closet Flange, djustable with Metal Ring HUB END 4 x x R NO. 811-K Closet Flange, djustable with Metal Ring HUB END 4 x R NO. 812 Closet Flange, djustable with Metal Ring GO 4 x x R NO Closet Flange, djustable with lastic Ring GO 4 x x LBLE N C ONLY 50
51 C and B DW Fittings R NO. 815 Flush Closet Flange F OER 3 E OR NDE 4 E HUB 4 x 4 / 4 x R NO. 815 KO Flush Closet Flange with Knockout F OER 3 E OR NDE 4 E HUB 4 x 4 / 4 x R NO. 820 Offset Closet Flange, djustable with Metal Ring OFFE HUB D E 4 x R NO Offset Closet Flange, djustable with lastic Ring OFFE HUB D E 4 x C & B D W F N G 51
52 C and B DW Fittings R NO. 824* Closet Flange, djustable with Metal Ring & 4 Extended pigot GO 4* *B ONLY R NO. 900* wivel ray lug dapter with Washer G X F ZE B 1 1 2* *B ONLY R NO. 910* wivel ray lug dapter with Washer H X F ZE B 1 1 2* *B ONLY 52
53 ipe Data hin Wall C DW ipe C hin Wall chedule 30 ipe C CHEDULE 30 (White) LN END M D 2949 MN. W. ER R NO. NOM. ZE UC # QY. ER G. OD WLL 100 F KD (N.) (N.) (LB.) C x Weight is approximate and is for shipping purposes only. ipe listed in this section meets or exceeds the requirements of M D H N ll products manufactured by Charlotte ipe and Foundry Company are proudly made in the U... esting with or use of compressed air or gas in C / B / CC pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC pipe or fittings. NEER test C / B / CC pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D W L L C D W 53
54 C hin Wall chedule 30 Fittings HUB DMENON ZE C D
55 C hin Wall chedule 30 Fittings R NO. C 1100 Coupling HUB X HUB R NO. C 1101 Female dapter F X HUB R NO. C 1102 ipe ncreaser-reducer HUB X HUB N x x x R NO. C 1105-X Fitting Cleanout dapter with Cleanout lug GO ZE B H N W L L C D W R NO. C 1109 Male dapter M X HUB
56 C hin Wall chedule 30 Fittings R NO. C 1112 Reducer Bushing GO X HUB 3 x x x R NO. C 1129 Hub dapter D 3 HUB O 3 HN WLL E GO X HUB ZE B 3 x R NO. C /4 Bend HUB X HUB ZE B
57 C hin Wall chedule 30 Fittings R NO. C /4 Bend, treet GO X HUB R NO. C /8 Bend HUB X HUB ZE B R NO. C /8 Bend, treet GO X HUB R NO. C 1400 anitary ee HUB X HUB H N W L L C D W R NO. C 1401 anitary ee, Reducing HUB X HUB D E 3 x x
58 C hin Wall chedule 30 Fittings R NO Double anitary ee, Reducing HUB X HUB D E 3 x R NO. C 1600 Wye HUB X HUB D R NO Wye, Reducing HUB X HUB D E 3 x x R NO. C 1611 Double Wye HUB X HUB D R NO. C 1800 Closet Flange HUB D 4 x
59 C hin Wall chedule 30 Fittings R NO. C 1800-KO Closet Flange HUB D 4 x R NO. C 1811 Closet Flange, djustable with Metal Ring HUB D 4 x H N R NO. C 1812 Closet Flange, djustable with Metal Ring GO D 4 x W L L C D W 59
60 LMED WRRNY Charlotte ipe and Foundry Company (Charlotte ipe ) roducts are warranted to be free from manufacturing defects and to conform to currently applicable M standards for a period of five (5) years from date of delivery. Buyer s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. his warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. his limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte ipe or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty. his Limited Warranty may only be modified in writing signed by an officer of Charlotte ipe. his Limited Warranty will not apply if: 1) he roducts are used for purposes other than their intended purpose as defined by local plumbing and building codes, and the applicable M standard. 2) he roducts are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by Charlotte ipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements. 3) his limited warranty does not apply when the products of Charlotte ipe are used with the products of other manufacturers that do not meet the applicable M or C standards or that are not marked in a manner to indicate the entity that manufactured them. 4) he roducts fail due to defects or deficiencies in design, engineering, or installation of the piping system of which they are a part. 5) he roducts have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte ipe; or any other act or event beyond the control of Charlotte ipe. 6) he roducts fail due to the freezing of water in the roducts. 7) he roducts fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents that are not compatible. 8) ipe outlets, sound attenuation systems or other devices are permanently attached to the surface of Charlotte C, B or CC products with solvent cement or adhesive glue. Charlotte ipe products are manufactured to the applicable M or C standard. Charlotte ipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte ipe and Foundry. ny Charlotte ipe products alleged to be defective must be made available to Charlotte ipe at the following address for verification, inspection and determination of cause: Charlotte ipe and Foundry Company ttention: echnical ervices 2109 Randolph Road Charlotte, North Carolina esting with or use of compressed air or gas in C / B / CC / Cast ron pipe or fittings can result in explosive failures and cause severe injury or death. NEER test with or transport/store compressed air or gas in C / B / CC / Cast ron pipe or fittings. NEER test C / B / CC / Cast ron pipe or fittings with compressed air or gas, or air over water boosters. ONLY use C / B / CC / Cast ron pipe for water or approved chemicals. Refer to warnings in F User Bulletin 4-80 and M D urchaser must obtain a return materials authorization and instructions for return shipment to Charlotte ipe of any product claimed defective or shipped in error. ny Charlotte ipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of Charlotte ipe. 4/15/10 Charlotte and Charlotte ipe are registered trademarks of Charlotte ipe and Foundry Company. 60
61 Notes 61
62 Notes 62
63 Notes 63
64 O BOX CHRLOE NORH CROLN HONE (704) (800) FX (800) LERURE BY FX (800)
Protective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
Technical Services: Tel: (66) 500-76 / Fax: (01) 71-7317 www.grinnell.com Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an
More informationPVC - WHITE PRESSURE FITTINGS L40P EFFECTIVE OCTOBER 1, 2018 REVISED PRODUCTS PRICE LIST
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationPVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationCorzan Dimensional Data & Weights
Volume II: 140 PVC & CPVC Dimensional Data & Weights Industrial Technical Manual Series S E C O N D E D I T I O N XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights www.ipexinc.com 140 PVC & CPVC
More informationAvery Dennison LW Series Retroreflective Window Sticker Film Issued: July 2013
LW series window stickers are designed to be variable printed for use inside or outside the vehicle. Reflective permit stickers provide easy verification for authenticity. Performance: L-S-300C Table IV
More informationSolvent Weld DWV Fittings Injection Molded in Sizes 4" 12" Fabricated in Sizes 10" 24"
Solvent Weld DWV Fittings Injection Molded in Sizes " " Fabricated in Sizes 0" " D Applications The most complex installations require the most advanced fittings. Injection molded DWV fittings from Royal
More informationSanitary Tees H x H x H Test Tees Hx H x H Vents Tees H x H x H Double Sanitary Tee H x H x H x H Long Radius Tee (Combly) H x H x H
ABS DWV Fittings a. Sanitary Tees H x H x H b. Test Tees Hx H x H c. Vents Tees H x H x H d. Double Sanitary Tee H x H x H x H e. Long Radius Tee (Combly) H x H x H f. Fitting Santee - Fitting x H x H
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationAvery Dennison LV-0700 Series Retroreflective Validation Decal Film Issued: July 2013
LV-0700 Series Reflective film is a quality, enclosed lens retorreflective material. LV- 0700 is ideal for vehicle tag and sticker requirements where low temperature application is desired such as for
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600917 EFFECTIVE: SEPTEMEBER 15, 2017 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1/8" 3/4" 2.88 3.50
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600718 EFFECTIVE: JULY 30, 2018 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1-1/2" 2" 2-1/2" 3" 3-1/2"
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationTemperature Profile for 36 Marker Spheres on 3M 788 ACCR Conductor 3M Company
Temperature Profile for 36 Marker Spheres on 3M 788 ACCR Conductor 3M Company NEETRAC Project Number: 07-113 June 2007 A Research Center of the Georgia Institute of Technology Requested by: Dr. Colin McCullough
More informationInstallation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
More informationAQUIFER DISTRIBUTION LTD. SASKATOON PH (306) FAX (306) REGINA PH (306) FAX (306) PVC - DWV PIPE
PVC - DWV PIPE Sec 15-11 010001 150 0001 0001 1 1/2" X 12 15 PVC DWV PIPE 2.76 010002 150 0001 0002 2" X 12 15 PVC DWV PIPE 3.72 010003 150 0001 0003 3" X 12 15 PVC DWV PIPE 7.66 010004 150 0001 0004 4"
More informationRIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
More informationMedium Pressure Sensor Analog Output
Medium Pressure Sensor Analog Output SM6844-015-A-B-5-S FEATURES Analog pressure calibrated and temperature compensated output Amplified analog output Compensated temperature range: 0 to 85oC Absolute
More informationASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
More informationInstallation and Operation Manual. AllSync Plus Wired Clocks
and Operation Manual AllSync Plus Wired Clocks Part # H004881 Rev. 4 September 2018 Safety Precautions AllSync Plus Clock & Operation Manual Troubleshooting General Operation Introduction Safety Precautions
More informationFIELD GUIDE FOR HORUS SCOPES
www.horusvision.com TM FIELD GUIDE FOR HORUS SCOPES Your Horus scope combines fine-quality optics, combat-proven hardware and the patented Horus reticle to deliver speed and accuracy for all shooters.
More informationSM98A Harsh Media Backside Absolute Pressure Series
SM98A Harsh Media Backside Absolute Pressure Series SM98A Series FEATURES Pressure Range: 10 Bar (145 PSIA), 20 Bar (290 PSIA) On-Board temperature sensing diode Small die (1.2 mm x 1.33 mm) Backside entry
More informationLow Pressure Sensor Amplified Analog Output SM6295-BCM-S
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S-040-000 FEATURES Pressure range from 0 to 40 cmh 2 O 5.0 V operation Amplified analog output (10 to 90%Vdd) Compensated temperature range: 0 to
More informationSmall, Gauge Pressure Sensor
Small, Gauge Pressure Sensor SM5G-GG Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported
More informationSK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationSmall Gage Pressure Sensor
Small Gage Pressure Sensor FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported configuration
More informationInstruction Sheet COOL SERIES DUCT COOL LISTED H NK O. PR D C FE - Re ove r fro e c sed rea. I Page 1 Rev A
Instruction Sheet COOL SERIES DUCT COOL C UL R US LISTED H NK O you or urc s g t e D C t oroug y e ore s g / as e OL P ea e rea g product PR D C FE RES - Re ove r fro e c sed rea t m a o se e x o duct
More informationCommercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
More informationSmall Absolute Pressure Sensor
Small Absolute Pressure Sensor SM5420E Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 95 millivolt span Constant current or constant voltage drive or non-ported
More informationGasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Gasketed Sewer Fittings SDR Injection Molded in Sizes Fabricated in Sizes G while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing
More informationUltra-Small Footprint N-Channel FemtoFET MOSFET Test EVM
User's Guide SLPU007 December 07 Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM Contents Introduction... Description... Electrical Performance Specifications... 4 Schematic... 4 Test Setup....
More informationRetroreflective Prismatic License Plate Film
Avery Dennison L-6050 Series Issued: April 2011 Avery Dennison L-6050 Series Retroreflective sheeting is a premium quality prismatic retroreflective material designed and engineered for the production
More informationOEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
More information/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
More informationDriveline Components Catalog Center Bearings
J300P-9A Driveline Components Catalog Bearings Updated 8-30-2013 Page 17, Style 22, Column B: changed Bearing part number 212135-1x from 2.890 to 2.690 NEW! Spicer ХС Bearing lmproved Performance and Maintenance
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationMET ONE RAIN GAGE MODELS 380, 385, 380M, 385M
MODELS 380, 385, 380M, 385M REVISION: 2/96 COPYRIGHT (c) 1993-1996 CAMPBELL SCIENTIFIC, INC. WARRANTY AND ASSISTANCE The MET ONE RAIN GAGE--MODELS 380, 385, 380M, 385M is warranted by CAMPBELL SCIENTIFIC,
More informationSolid State Pressure Sensor
Solid State Pressure Sensor SCD - Model FEATURES iature Size Surface Mount Automated Assembly Low Cost APPLICATIONS Barometer Medical Instruments White Goods Process Control DESCRIPTION The SCD MEMS piezoresistive
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More informationSN74LS157MEL. Quad 2 Input Multiplexer LOW POWER SCHOTTKY
Quad 2 Input Multiplexer The LSTTL/ MSI is a high speed Quad 2-Input Multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four buffered outputs
More informationSystem Data Sheet... 2 ProPress Product Instructions ProPress for ½" to 2" copper tubing... 3 ProPress XL for 2¼" to 4" copper tubing...
ProPress System Potable Water Hydronic Heating Chilled Water Compressed ir Nitrogen N 2 ow Pressure Steam Fire Protection Vacuum Corgon Oxygen 0 2 (non medical) rgon System Data Sheet.... 2 ProPress Product
More informationWatercooled RF Power Pot Capacitors Internal Cooling System
Watercooled RF Power Pot Capacitors Internal Cooling System TWXFZ 06266 FEATURES High voltage, current and power ratings Compact design reduces terminal self inductance and permit operation up to higher
More informationSolid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case
Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (to +125 C with voltage derating) Capacitance Tolerance: at 120 Hz, +25
More information2D Patterns MODULAR & EASY-TO-INSTALL. turf.design 844 TURF OMG. pat e n t pending
Adhesive Tile by 2D Patterns MODULAR & EASY-TO-INSTALL Glass walls, concrete floors, and exposed ceilings are the leading cause of poor office acoustics. Most offices want an open office feel, but often
More informationR a t i o n a l i s e d B r a k e A c t u a t o r s
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t C a t a l o g u e R a t i o n a l i s e d B r a k e A c t u a t o r s... for Air Disc Brake applications Disclaimer The information contained
More information3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
More information3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
More informationField Pro Operation and Installation Manual
Field Pro Operation and Installation Manual Xtreme Research Corporation SkyScan Division P.O. Box 336, Port Richey, FL 34673-0336 1-800-732-0665 Table of Contents 1. Installation 3 2. Operation 5 3. Care
More informationMC Bit Magnitude Comparator
Bit Magnitude Comparator The MC0 is a high speed expandable bit comparator for comparing the magnitude of two binary words. Two outputs are provided: and. A = B can be obtained by NORing the two outputs
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More informationDerating of the MOSFET Safe Operating Area Outline:
Outline: This document discusses temperature derating of the MOSFET safe operating area. Table of Contents Outline:... 1 Table of Contents... 2 1. Introduction... 3 2. What is the safe operating area?...
More informationGWC Valve International. Proven technology for individual valve solutions worldwide
Proven technology for individual valve solutions worldwide TRUNNION MOUNTED BALL VALVES PRESSURE CLASS: ASME 150-2500 API 2000-5000 SIZE RANGE: 2-4 API STANDARDS: 6D & 6A ASME B16.34 Catalog Number TBV-1001
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationLDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
LDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationSKID STEER LOADER SNOWPLOW SCOOP PLOW MODELS 2680, 2690
SKID STEER LOADER SNOWPLOW SCOOP PLOW MODELS 2680, 2690 OPERATOR S MANUAL DO NOT USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL HAS BEEN READ AND THOROUGHLY UNDERSTOOD PART NUMBER 25012422 Rev. A Table
More informationMust Read Before Installation TadPoleTM Safety and Warnings
Must Read Before Installation TadPoleTM Safety and Warnings The recommendations, requirements, rules, and instructions of your Vehicle's Roof-Top Rack System should ALWAYS be followed. The TadPole TM,
More informationSKID STEER LOADER SNOWPLOW STEEL STRAIGHT PLOW MODELS 2275, 2280, 2285 SCOOP PLOW MODELS 2682, TRIP EDGE STRAIGHT PLOW MODEL 2103
SKID STEER LOADER SNOWPLOW STEEL STRAIGHT PLOW MODELS 2275, 2280, 2285 SCOOP PLOW MODELS 2682, 2692 10 TRIP EDGE STRAIGHT PLOW MODEL 2103 OPERATOR S MANUAL DO NOT USE OR OPERATE THIS EQUIPMENT UNTIL THIS
More information3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
More informationCAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE.
CAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE. ON Press either brightness button ( + or - ) to turn on the sight. The sight is also programmed to turn on when it
More informationHoke Cajon Parker 4CNP 4-CN 4-4MCN 6CNP 6-CN 6-6MCN 8CNP 8-CN 8-8MCN 12CNP 12-CN 12-12MCN. Hoke Cajon Parker
Cross Reference CLOSE NIPPLE HEX NIPPLE REDUCING NIPPLE LONG HEX NIPPLE 4CNP 4-CN 4-4MCN 6CNP 6-CN 6-6MCN 8CNP 8-CN 8-8MCN 12CNP 12-CN 12-12MCN 1NP 1-HN 1-1MHN 2NP 2-HN 2-2MHN 4NP 4-HN; 4-4MHN 6NP 6-HN
More informationWatercooled RF Power Pot Capacitors External Cooling System
Watercooled RF Power Pot Capacitors External Cooling System FEATURES High voltage, current, and power ratings Compact design reduces terminal self inductance and permit operation up to higher frequencies
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationAM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS. October, 1999 IM No
AM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS October, 1999 IM No. 597 1112 EQUIPMENT LOST OR DAMAGED IN TRANSIT. When delivering the equipment to you, the truck driver or carrier s agent
More informationOperating instructions Magnetic-inductive flow sensor SM6004 SM7004 SM / / 2014
Operating instructions Magnetic-inductive flow sensor SM6004 SM7004 SM8004 80003223 / 00 05 / 2014 Contents 1 Preliminary note...3 1.1 Symbols used...3 2 Safety instructions...4 3 Functions and features...5
More informationHazard Communication Program
Hazard Communication Program The Meriden Board of Education school district is complying with the requirements of OSHA's Hazard Communication Standard for construction by compiling a list of hazardous
More information3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
More informationLogic Configuration Part Number Package Type Packing Method Quantity. IX4423N 8-Pin SOIC Tube 100 IX4423NTR 8-Pin SOIC Tape & Reel 2000
IX23-IX2-IX25 3-mpere Dual Low-Side Ultrafast MOSFET Drivers Features 3 Peak Output Current Wide Operating Voltage Range:.5V to 35V - C to +25 C Operating Temperature Range Latch-up Protected to 3 Fast
More informationESB-M3G76-B2: Tape, Polyester Two Sided Pressure Sensitive. Tape Polyester Two Sided Pressure Sensitive. Technical Bulletin November, 2016
Ford 3 ESB-M3G76-B2: Tape, Polyester Two Sided Ford ESB-M3G76-B2 Tape Polyester Two Sided Technical Bulletin November, 2016 3M tested the following adhesive tapes to the Automotive OEM Spec: Ford ESB-M3G76-B2
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationV N (8) V N (7) V N (6) GND (5)
4-Channel Low Capacitance Dual-Voltage ESD Protection Array Features Three Channels of Low Voltage ESD Protection One Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000 4 2 Level
More informationGlobal Product Strategy (GPS) Safety Summary. Tetrahydrofuran
Global Product Strategy (GPS) Safety Summary Tetrahydrofuran This GPS Safety Summary is a high-level summary intended to provide the general public with an overview of product safety information on this
More informationStainless Steel Sanitary Products. 3A & BPE Industry Standard Designs Without Brand Name Price. More For Less
Stainless Steel Sanitary Products 3A & BPE Industry Standard Designs Without Brand Name Price More For Less Material Inspection Certification EN 10204 3.1 Positive Material Identification ( PMI ) X-Ray
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationSkilled Air for Industry. Cyclone Collector. Operators Manual. II 3 D c
Skilled Air for Industry Cyclone Collector Operators Manual II 3 D c Introduction When you purchased your Kice Cyclone, you obtained a high efficiency product cleaner of a proven design based on thousands
More informationER2 Short-head Electric Chain Hoist
O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in
More informationFORK-MOUNTED SNOW PLOW, MODEL SPB-N-72 INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationInstruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights
Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
More informationMODEL H3022 MAGNETIC BASE / DIAL INDICATOR / CALIPER COMBO OWNER'S MANUAL
MODEL H322 MAGNETIC BASE / DIAL INDICATOR / CALIPER COMBO OWNER'S MANUAL COPYRIGHT DECEMBER, 5 BY GRIZZLY INDUSTRIAL, INC. REVISED DECEMBER, 17 (HE) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED
More informationNSVJ6904DSB6. Advance Information N-Channel JFET 25 V, 20 to 40 ma, 40 ms, Dual
NSVJ694DSB6 Advance Information N-Channel JFET V, to 4 ma, 4 ms, Dual The NSVJ694DSB6 is a composite type of JFET designed for compact size and high efficiency which can achieve high gain performance.
More informationMelton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C
Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationBB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS
BB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION / IDENTIFICATION The BB series valve uses Proportion- Air closed loop technology for pressure control. It gives an output pressure proportional
More informationRoyal Building Products Electrical Solutions Catalog
Royal Building Products Electrical Solutions Catalog ELECTRICAL SOLUTIONS ELECTRICAL SOLUTIONS WHO IS ROYAL BUILDING PRODUCTS? Our company is part of a new corporation, Axiall, formed by a merger of Georgia
More informationN-channel TrenchMOS standard level FET. High noise immunity due to high gate threshold voltage
Rev. 2 12 March 29 Product data sheet 1. Product profile 1.1 General description Standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
More informationSN74LS145MEL. 1 of 10 Decoder/Driver Open Collector LOW POWER SCHOTTKY
of 0 Decoder/Driver Open Collector The SN74LS45, -of-0 Decoder/Driver, is designed to accept BCD inputs and provide appropriate outputs to drive 0-digit incandescent displays. All outputs remain off for
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationOperating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04
Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04 UK 80223776 / 00 11 / 2018 Contents 1 Preliminary note...3 2 Safety instructions...4 3 Functions and features...4 4 Function...5
More informationNE522 High Speed Dual Differential Comparator/Sense Amp
HighSpeed DualDifferential Comparator/Sense Amp Features 5 ns Maximum Guaranteed Propagation Delay 0 A Maximum Input Bias Current TTL-Compatible Strobes and Outputs Large Common-Mode Input oltage Range
More informationThe FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationCAUTION: BEFORE INSTALLATION, CONFIRM THAT THE CROSSBOW IS UNLOADED AND IS IN SAFE OPERATING CONDITION.
CAUTION: BEFORE INSTALLATION, CONFIRM THAT THE CROSSBOW IS UNLOADED AND IS IN SAFE OPERATING CONDITION. MOUNTING THE SCOPE Position the scope roughly on the optic rail of the crossbow (only gently tightening
More informationLUDLUM MODEL 42-5 NEUTRON BALL CART. August 2015 Serial Number PR and Succeeding Serial Numbers
LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationJDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual
JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and
More informationSAFETY TRAINING LEAFLET 08 ACETYLENE, CALCIUM CARBIDE, LIME SLUDGE AND PURIFYING MATERIALS
SAFETY TRAINING LEAFLET 08 ACETYLENE, CALCIUM CARBIDE, LIME SLUDGE AND PURIFYING MATERIALS Doc 23.08/18 EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70
More information