STANDARD CARTRIDGE HEATERS
|
|
- Gordon Tucker
- 5 years ago
- Views:
Transcription
1 Whether they are kept in stock or not, standard cartridge heaters are manufactured according to high density technology. Standard cartridge heater's dimensions : NH to mm NH to mm This technology requires a H bore fit (see p.). cartridge heaters are available within hours, within the limit of our stock. Maximum watt density over the surface of the cartridge can reach 0 W/cm², under specific conditions. Rated Wattage : from to 0 W. Rated Voltage : 0 V single phase. Stainless steel sheath. Ceramic end cap protecting the connection leads. Standard connection leads ; flexible multi strands, nickel core wire with fiberglass silk silicone impregnated insulation. Tolerance over the length : L < 0 mm : ± 2 mm. L 0 mm : ± 2 %. Manufactured in accordance with EN 01 standards Tolerance over the wattage : +% % Leakage current < 0. ma/kw Nominal mm (equiv. inches).3 (1/'')..2 (3/'').. (1/2''). (/'') 1.0 (3/''). (1'') Tolerance over mm 0.03 / / / / / / / / / / / / 0. L mm NC : non heating Min mm Max. mm (equiv. inches) (equiv. inches). (1''1/) 2. ('') 0 0. (1''1/) 3.2 ('') 3.1 (1''1/2). ('') 0. (2''). ('') 3. (2''1/2). ('') 3. (2''1/2) Nous consulter Some standard cartridge heaters can be fitted with built in J thermocouples (shown in the table as P+tcj), see the layout sketches and the assembling recommendations p. &. In this case, the standard length of connection leads and thermocouple wires is mm. Our full range of cartridge, from the table below, is UL recognized by Underwriters Laboratories for the USA and Canada. Standard cartridge heaters can be fitted with several types of connection (see p.) and/or accessories (see p.) Special manufacturing : odd sizes, variable power zone, built in thermocouple... (see p.).3 (1/'') L. (1"1/) tcj 0 0+tcj +tcj +tcj 0 0+tcj +tcj H1/X1.2X0 H1/X1.2X HJ1/X1.2X H1/X1.X HJ1/X1.X0 H1/X1.X H1/X1.X HJ1/X1.X H1/X1.X H1/X1.X HJ1/X1.X H1/X1.X H1/X2X0 HJ1/X2X0 H1/X2X H1/X2X H1/X2XA H1/X2X HJ1/X2X H1/X2X H1/X2X H1/X1.2X H1/X1.2X H1/X1.X0 H1/X2X H1/X2.X0 H1/X2.X.3 (1/'') L (3"1/2) 1. ('') +tcj +tcj 0 +tcj +tcj +tcj +tcj H1/X2.X HJ1/X2.X H1/X2.X HJ1/X2.X H1/X3X H1/X3X HJ1/X3X H1/X3X HJ1/X3X H1/X3X HJ1/X3X H1/X3X H1/X3.X H1/X3.X H1/XX H1/XX H1/XX HJ1/XX H1/X2.X H1/X2.X H1/X3X0 H1/X3X H1/X3.X H1/X3.X H1/XX H1/XX H1/XX 2
2 .3 (1/''). 1. (") (") 2. (") tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj H1/XX H1/XX H1/XX H1/XX H.XX H.XX0 HJ.XX0 H.XX H.XX H.XX H.XX HJ.XX H.X0X H.X0X HJ.X0X H.X0X HJ.X0X H.X0X HJ.X0X H.X0X HJ.X0X H.X0X H.X0X HJ.X0X H.X0X HJ.X0X H.X0X H.X0X H.X0X HJ.X0X H.X0X H.X0X HJ.X0X H.X0X HJ.X0X H.X0X H.X0X H.X0X HJ.X0X H.X0X H.X0X H1/XX H1/XX H1/XX H1/XX H1/XX H1/XX H1/XX H1/XX H1/XX H.XX0 H.XX H.XX H.XX H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X tcj 0 0 +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj +tcj H.X0X HJ.X0X H.X0X H.X0X HXX HXX0 HXX0 HXX HJXX HXX HXX HJXX HX0X HJX0X HX0X HX0X HJX0X HX0X HX0XA HX0X HJX0X HX0X HJX0X HX0X HX0X HJX0X HX0X HX0X HX0X HJX0X HX0X HX0X HX0X HJX0X HX0X HX0X HJX0X HX0X HJX0X HX0X HJX0X HX0X HX0X HX0X HX0X HX0X HX0XA HJX0X HX0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X HX0X HX0X HX0X HX0X HX0X STANDARD CARTRIDGE HEATERS 3 L L
3 (3/") 0. (1"1/) (3''1/2) 1. ('') ('') +tcj +tcj 0 0 +tcj +tcj 0 +tcj 0 +tcj +tcj +tcj +tcj 0 HJX0X HX0X HX0X HJX0X H3/X1.2X H3/X1.2X H3/X1.X0 H3/X1.X H3/X1.X HJ3/X1.X HJ3/X1.X H3/X2X0 H3/X2X H3/X2XA H3/X2X H3/X2X HJ3/X2X H3/X2X H3/X2X H3/X2.X H3/X2.X H3/X2.X H3/X3X H3/X3X H3/X3X H3/X3X HJ3/X3X H3/X3X HJ3/X3X H3/X3X H3/X3X H3/X3.X HJ3/X3.X H3/XX H3/XX H3/XX H3/XX H3/XX HJ3/XX H3/XX H3/XX0 HX0X HX0X H3/X1.2X0 H3/X1.2X H3/X1.X H3/X1.X H3/X1.X H3/X2X H3/X2X H3/X2X H3/X2.X0 H3/X2.X H3/X2.X H3/X2.X H3/X2.X H3/X3.X H3/X3.X H3/X3.X H3/X3.X H3/XX H3/XX H3/XX.2 (3/") ('') 2. ('').1 (''1/2) 1. (") 3.2 (") tcj +tcj +tcj +tcj +tcj +tcj +tcj H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XXB H3/XX H3/X.X H3/XX H3/XX H3/XX0 H3/XX H3/XX H3/XX H3/XX0 H3/XX HXX0 HXX HXX HXX HJXX HXX HXX HJXX HX0X HJX0X HX0X HX0X HX0X HJX0X HX0X HX0X HX0X HJX0X HX0X HX0X HX0X HJX0X HX0X HX0X HX0X HX0X HJX0X HX0X H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX HXX HXX0 HXX HXX HX0X HX0X HX0X L L
4 tcj +tcj +tcj 00 +tcj HX0X HX0X HX0X HJX0X HX0X HX0X HJX0X HX0X HX0X HJX0X HX0X HX0X00 HX0X HX0X HX0X HX0X HX0X HX0X HX0XA HX0X HJX0X HX0X HX0XA HXX HXX HXX H.XX H.X0X0 H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X HX0X HX0X HX0X HXX HXX HXX0 H.XX H.XX0 H.XX H.XX H.XX H.XX H.XX H.X0X H.X0X H.X0X H.X0X H.X0X H.X0X0 H.X0X H.X0X H.X0X H.X0X H.X0X0.. (1/2") tcj +tcj H.X0X H.X0X H.X0X H.X0XA H.X0X0 H.X0X0 H.X0X H.X0X H.X0X HJX0X H.X0X H.X0X H.X0X HX0X H.X0X H.X0X H.X0X H.X0X HX0XA HX0X X0XB H.X0X HJX0X H.X0X HX0XB H.X0X H.X0X HX0XA HX0XE HX0X X0XB HX0X1 H.XX HXX H.XX H.XX H.XX H.XX HXXE HXX HXX1 HXX1 H.XX H.XX HXX XXB HXX1 HXX1 H.XX H.XX HXX HXX1 H1/2X1.X H.X0X H.X0X H.X0X H.X0X HXX0 HXX0 HXX1 HXX0 H1/2X1.X H1/2X1.X L L
5 . (1/2") (3"1/2) 1. (") (") 2. (").1 ("1/2) 1. (") 3.2 (") 0 0 +tcj H1/2X2X H1/2X2X H1/2X2X H1/2X2X H1/2X2X H1/2X2.X H1/2X2.X H1/2X3X H1/2X3X H1/2X3X H1/2X3X H1/2X3XA H1/2X3X H1/2X3X0 H1/2X3.X H1/2X3.X0 H1/2XX H1/2XX HJ1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX0 H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX0 H1/2XX0 H1/2XX H1/2X.X H1/2XX H1/2XX00 H1/2XX H1/2XX H1/2XX H1/2XX H1/2XX1 H1/2X1.X H1/2X1.X H1/2X2.X H1/2X2.X H1/2X2.X H1/2X3X H1/2X3.X H1/2X3.X H1/2X3.X H1/2XX H1/2XX H1/2XX00 H1/2XX H1/2XX0. (1/2"). (/"). (") (") 2. ("). (") (") (") 2. (") 1. (") 3.2 (") H1/2XX H1/2XX H1/2XX1 H1/2XX1 H1/2XX H1/2XX H1/2XX1 H1/2XX0 H1/2XX H1/2XX H1/2XX H1/2XX1 H1/2XX0 H/X2X H/X3X H/X3X H/XX H/XX H/XX0 H/XX H/XX H/XX H/XX H/XX H/XX H/XX H/XX H/XX1 H/XX0 H/XX H1/2XX H1/2XX0 H1/2XX0 H1/2XX1 H1/2XX H/X2X H/X2X H/X2.X H/X2.X H/X2.X H/X2.X H/X2.X H/X2.X0 H/X3X H/X3X H/X3X H/X3X0 H/X3X H/XX H/XX H/XX H/XX1 H/XX H/XX H/XX H/XX1 H/XX1 H/XX H/XX L L
6 . (/") 3.2 ("). (") ("). (") tcj 1 1 H/XX1 H/XX1 H/XX1 H/XX0 H/XX H/XX1 H/XX1 H/XX0 H/XX H/XX1 H/XX1 HXX HXX HXX HX0X HX0X3 HX0X HX0X HX0X HX0X0 HX0X HX0X HX0X HJX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X1 HX0X H/XX0 H/XX H/XX H/XX0 H/XX0 H/XX0 HXX0 HXX HXX HX0X0 HX0X HX0X HX0X HX0X1 HX0X HX0X HX0X 1.0 (3/") (") (") 2. (") 3.2 (") ("). (") HX0X HX0XB HX0X00 HX0X HX0XD HX0X1 HX0X1 HXX HXX HXX HXXD HXX1 HXX1 HXX0 HXX HXX HXX1 HXX1 HXX1A HXX0 HXX HXX HXX1 HXX1 HXX1 HXX0 H3/XX H3/XX H3/XX0 HXX0 HXX HXX1 HXX HXX HXX0 H3/X3X H3/X3X H3/X3X H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX H3/XX1 H3/XX H3/XX H3/XX H3/XX1 H3/XX H3/XX H3/XX0 H3/XX H3/XX0 H3/XX H3/XX H3/XX1 H3/XX L L
7 L (W) W.dens Stockées Non stockées L (W) Stockées Non stockées HX0X HX0X HX0X HX0X HX0X HX0X1 HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X HX0X1 HX0X HX0X HX0X1 HX0X1 HX0X HX0X HX0X. (1") HX0X0 HX0X HX0X HXX HXX HXX1 HXX0 HXX HXX0 HXX HXX1 HXX0 HX0X HX0X1 HX0X0 HXX1 HXX0 HXX HXX1 HXX0 HXX0 H1X3X All these cartridge heaters can be fitted with specific accessories and connection types (see p et p). In addition to standard cartridge heaters, see our special product range (p) ASSEMBLY RECOMMENDATIONS FOR CARTRIDGE HEATERS BORING AND FIT OF STANDARD CARTRIDGE HEATERS In order to facilitate the heat transfer between the cartridge heater and the mass to be heated, a bore with an H tolerance is recommended. Nominal boring diameter in mm.3 (1/'')..2 (3/'').. (1/2''). (/'') 1.0 (3/'') Mini value H Bore Standard cartridge heaters require a H bore fit. However, when needed for applications with high watt density or high temperature requirements, fitting tolerances can be tighter. ASSEMBLY RECOMMENDATIONS In order to improve heat transfer, some basic cares should be taken. For further details, see our technical assembly section. Cartridge heaters should never operate in the open air. Maxi value Hole Cartridge heater Non contractual picture. To protect the heater from damage, we recommend using thermal transfer paste like GRIPACIM. It will improve heat transfer between the heater and the object to be heated. Caution! Do not apply paste over connection wires. Fit It is highly recommended to protect connections from excessive bending and to keep lead wires away from moisture, and from any possible matter spilover... Cartridge heaters are manufactured to be part of an assembly. As standard, they are not fitted with an earth wire ; it is up to the user to make sure that the systems is in accordance with the local safety standards.
Mineral-insulated thermocouples to DIN and EN
Data Sheet 90.1210 (90.1221) Page 1/7 s to DIN 43 710 and EN 60 584 for temperatures from -200 to +1200 C flexible sheath with shock-proof measuring insert protection tube diameter from 0.5mm fast response
More informationHR-Z SERIES Mild Radiation Resistance LVDT
SERIES Mild Radiation Resistance LVDT SPECIFICATIONS Mild Radiation Resistant High Reliability Large core-to-bore clearance Stroke ranges from ± 0.05 to ±10 inches AC operation from 400Hz to 5kHz Stainless
More informationGeneral characteristics
General characteristics This range of insulators and partition bushings provides for connecting and supporting low- and medium-voltage electrical equipment. - Their purpose is to provide electrical and
More informationUniversal limit switches
SWITCHES.CROUZET.COM 1 LIMIT SWITCHES 0/016 Universal limit switches 8384 standard 8384 with positive break operation Conformity to standards IEC / EN 60947--1, including Annex K for version with positive
More informationPOWER FACTOR CORRECTION CAPACITOR CELLS SPECIFICATIONS
SPECIFICATIONS DESCRIPTION Metallized polypropylene capacitors offer improved performance and proven reliability in applications requiring power factor correction or harmonic filtering. Metallized polypropylene
More informationFLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:
abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationCLIPPER SCREEN SIZES - DECEMBER 28, 2005
PERFORATED METAL ROUND HOLE FRACTIONS HOLE SIZE HOLE SIZE IN HOLE SIZE TOLERANCE STANDARD OR ( INCH ) IN 64TH THOUSANDS IN MM THOUSAND ADD ON PRICE 1/25 2.56.040 1.01 + 0 -.003 STANDARD 1/24 2.67.041 1.05
More informationTechnical Notes. Introduction. PCB (printed circuit board) Design. Issue 1 January 2010
Technical Notes Introduction Thermal Management for LEDs Poor thermal management can lead to early LED product failure. This Technical Note discusses thermal management techniques and good system design.
More informationLMM-H04 Mass Air Flow Sensor
Hot Film Anemometer Component Highly reliable and long term stable Uni-directional airflow measurement Fast reaction time Manufactured according ISO TS16949 Can be adapted to various flow channel geometries
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationBrighter and Cooler. 95CRI Luna 200. Best Lumen / Watt LED Flip Chip COB Module
Best Lumen / Watt LED Flip Chip COB Module Brighter and Cooler High Efficacy & Lower Thermal Resistance Luna 200 Chip on Board is a high-performance LED module based on patented DBR Flip Chips and unique
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION RATED PRIMARY OLTAGE () This is the supply assigned to the transformer by the manufacturer. RATED SECONDARY OLTAGE () This is the secondary output assigned to the transformer when
More informationPeltier Application Note
Peltier Application Note Early 19th century scientists, Thomas Seebeck and Jean Peltier, first discovered the phenomena that are the basis for today s thermoelectric industry. Seebeck found that if you
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationHR-Z SERIES Mild Radiation Resistance LVDT
SERIES Mild Radiation Resistance LVDT SPECIFICATIONS Mild Radiation Resistant High Reliability Large core-to-bore clearance Stroke ranges from ± 0.05 to ±10 inches AC operation from 400Hz to 5kHz Stainless
More informationCDS. high density spring connection
CDS high density spring connection DENSTY STANDARD 1A CDS DENSTY A A spring connection CDS Series The originality of multipole connectors represents one of the core values of LE, a leading company in this
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More information3.1 Materials The housing is 316 stainless steel (excluding the connector shell which is 303 or better).
Change NO. LTR Description Author Date Approved Date 10448 A Update Standards, Change Probe Dims. JWS 6-7-12 JWS 6-7-12 10485 B Add Figure 2 for Probes Longer Than 3 Inches JWS 12-3-12 JWS 12-3-12 10497
More informationECNG3032 Control and Instrumentation I
sensor ECNG3032 Control and Instrumentation I Lecture 1 Temperature Sensors Sensors The sensor is the first element in the measurement system. Measurand Transducer Principle Excitation Signal Interface
More informationReference Specification
Reference Specification High Voltage Ceramic Capacitor DHRB34C221M1FB Issued Date: March 18, 2014 Product specifications in this drawing are subject to change or our products described in this drawing
More informationDATA SHEET. Thermocouple module with digital I²C-Interface - THMOD-I²C. Characteristic features. Areas of application. Features.
Description Characteristic features Industrial temperature measuring method Wide measuring range, -270...+1360 C Digital I²C-interface Simple integration to micro-controller Scope of supply with thermocouple,
More informationBrighter and Cooler. Luna 160. Best Lumen / Watt LED Flip Chip COB Module
Best Lumen / Watt LED Flip Chip COB Module Brighter and Cooler High Efficacy & Lower Thermal Resistance Luna 160 Chip on Board is a high-performance LED module based on patented DBR Flip Chips and unique
More informationLoad Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging
More informationZinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC
VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide
More information792A AC/DC Transfer Standard
92A AC/DC Transfer Standard Technical Data Support for your most demanding ac measurement requirements ppm total uncertainty Traceable to national standards range: 2 mv to 00 V Frequency range: Hz to 1
More informationDr. Michael Müller. Thermal Management for LED applications
Thermal Management for LED applications Content Thermal Design Basics thermal management Internal thermal management External thermal management 2 1967 founded with the production of insulation parts for
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 00 khz/ 0. ma L 2x5 µh typ. 2 3 2,7 0,3 4 Impedance 00 MHz Z 500 Ω ±25% Rated
More informationAn Introduction to Insulation Resistance Testing
An Introduction to Insulation Resistance Testing In a perfect world, electrical insulation would allow no current to flow through it. Unfortunately, a number of factors can over time result in the deterioration
More informationApplications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
More informationHigh Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
More informationSpecific Heat. Power Supply Beaker Beam Balance Conecting wires ice. Assembly
Specific Heat Objectives a. To measure the specific heat capacity of water b. To measure the specific heat capacity of aluminium c. To measure the heat of fusion of ice (Optional) Apparatus Required Power
More informationIntroduction to Infrared Radiation.
Introduction to Infrared Radiation. 1. Starting at the source the Heating Coil. 2. Electrical Issues some basic calculations. 3. The basics of Heat Transfer 4. The Electromagnetic Spectrum 5. Infrared
More informationSpecific Heat. Power Supply Beaker Beam Balance Conecting wires ice. Assembly
Specific Heat Objectives a. To measure the specific heat capacity of water b. To measure the specific heat capacity of aluminium c. To measure the heat of fusion of ice (Optional) Apparatus Required Power
More informationHIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
DESCRIPTION: RoHS compliant (*) Capacitors 0805 to 6560 Rated voltage 1000V to 10KV Dielectric Type I and II SMD and leaded versions * Non RoHS version still maintained for current applications. I. Foreword
More informationPLASTIC FILM CHIP CAPACITOR TYPE ECHU(X)
1 / 17 P 1. SCOPE This specification covers the requirement for metallized polyphenylene sulfide dielectric fixed chip capacitor for use in electronic equipments. 2. PRODUCT NAME Plastic film chip capacitor
More informationGood practice guide containing experimental results and recommendations for the selection, preparation and calibration of the temperature sensors
Good practice guide containing experimental results and recommendations for the selection, preparation and calibration of the temperature sensors 1. Scope... 2 2. Introduction... 2 3. Selection of thermocouples
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationS R O T C U D IN & MYRRA
TRANSFORMERS & INDUCTORS MYRRA...Of course! TECHNICAL INFORMATION RATED PRIMARY OLTAGE () This is the supply assigned to the transformer by the manufacturer. RATED SECONDARY OLTAGE () This is the secondary
More informationPN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
More informationNORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features NORMACLAMP TORRO hose clips are specially suitable for applications under high mechanical
More informationJumbo Cross Beam Ionizer
Jumbo Cross Beam Ionizer Version 1.0 September 30, 2008 Page 1 of 19 Table of Contents Cross Beam Ionizer... 1 Table of Contents... 2 1.0 Packing List... 3 1.1 Packing List for Cross Beam Ionizer... 3
More informationReference Specification
Reference Specification High Voltage Ceramic Capacitor DHRB5AD221M1CB Issued Date: November 14, 2012 Product specifications in this drawing are subject to change or our products described in this drawing
More informationProject name. Qty. Colour and colour temperature. Optics (nominal distribution) Maximum delivered output. Maximum delivered intensity
D u m m y Specification sheet Client Project name Order# Type Qty Front view Bottom view Photometric Summary Description The Lumenalpha Clear Small is a high-performance adjustable LED downlight for commercial,
More informationAD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
More informationT h e rm i s t o r s
Data Pack E Issued March 00 - T h e rm i s t o r s NTC thermistors The R S range of NTC thermistors includes standard tolerance negative temperature coefficient thermistors, a range of small close tolerance
More informationSensors and Actuators Sensors Physics
Sensors and ctuators Sensors Physics Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems 2 THERMOELECTRIC SENSORS (Chapter 3.9, 16.4) 3 Thermoelectric effect thermoelectric
More informationSolenoid valves Type EVUL
Data sheet Solenoid valves EVUL EVUL solenoid valves are designed to fit into compact refrigeration systems. Available in servo operated versions they can be applied in liquid, suction, and hot gas lines.
More informationPLASTIC FILM CHIP CAPACITOR TYPE ECHU1(C) Operating temperature range
1/ 16 P. 1. SCOPE This specification covers the requirement for metallized polyphenylene sulfide dielectric fixed chip capacitor for use in inverter circuit for LCD back light and use in electronic equipments.
More informationInvestigation of anomalous heat production in Ni-H systems
Cerron-Zeballos, E., et al., Investigation of anomalous heat production in Ni-H systems. Nuovo Cimento Soc. Ital. Fis. A, 1996. 109A: p. 1645. Investigation of anomalous heat production in Ni-H systems
More informationMODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.)
Remote I/O R7KF Series I/O MODULE (-III) POWER INPUT DC power R: V DC (Operational voltage range: ±0 %; ripple 0 %p-p max.) 0 (8.7). (.) 7(.8) mm (inch) [] OPTIONS (multiple selections) Output data read
More informationISEmax CAM40/CAS40. Technical Information
Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works
More informationThermal Measurement and Simulation of the Component Rework Profile Temperature
Thermal Measurement and Simulation of the Component Rework Profile Temperature J.T. Nurminen Oulu University of Applied Sciences, School of Engineering, Oulu, Finland janne.nurminen@osao.fi Abstract In
More informationMulti Layer Ceramic Capacitor
Description MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE s MLCC
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationAC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
HAA HAA3 HAA2 HAA4 DESCRIPTION The HAAX series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. FEATURES Bi-polar
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated
More informationSee if you can find these 10 saw words in the puzzle below. To double the fun, each one appears twice.
Student Activities I SAW THAT! See if you can find these 10 saw words in the puzzle below. To double the fun, each one appears twice. Band Circular Jig Radial Arm Saw Chop Reciprocating Miter Saber Table
More informationThermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
More informationPRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0.
CUSTOMER :. DATE : 213. 3. 29. REV : Rev. 1.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 3K MODEL NAME : LLDMWW-15K21A (Type II Lens - H:16 V:7 ) LLDMWW-15K22A (Type III Lens - H:135 V:6 ) LLDMWW-15K23A
More informationA Demonstration Unit to Enhance Heat Transfer Lectures on Natural and Forced Convection
A Demonstration Unit to Enhance Heat Transfer Lectures on Natural and Forced Convection Charles H. Forsberg Department of Engineering, Hofstra University, Hempstead, NY 11549 Session 1566 Overview As a
More informationSPECIFICATIONS. Tolerances. L / [+1.0 / -0.5mm] ±1% / ±5% [15.2] ±1% / ±5% [20.3] Ordering Information
MSR Series Bare Metal Element Resistors Resistances from.5 to.1ohms Tolerance to ±1% Resistance Wire TCR: ± 2ppm/K For Current Sensing and Shunt Applications All Welded Construction Low Inductance (
More informationSeries 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationDISCRETE SEMICONDUCTORS DATA SHEET. BLF245 VHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch. DESCRIPTION Silicon N-channel enhancement
More informationLoad Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
More informationPHOTO SCR OPTOCOUPLERS
PACKAGE SCHEMATIC 6 6 ANODE 6 GATE CATHODE 2 5 ANODE N/C 3 4 CATHODE 6 DESCRIPTION The HC series consists of a gallium-arsenide infrared emitting diode optically coupled with a light activated silicon
More information6 INCH W X 5-3/4 INCH D X 8-3/8 INCH H
0 South Street -, TX Nacogdoches Phone: -- Fax: -0- S0N0AN.KVA PH 0/V /V Buck Boost Transformer Eaton Corp Catalog Number S0N0AN Manufacturer Eaton Corp Description Buck Boost Transformer, Power Rating
More informationRecommended Hole Pattern: [mm]
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation
More informationDISCRETE SEMICONDUCTORS DATA SHEET. BLF543 UHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET October 1992 FEATURES High power gain Easy power control Good thermal stability Gold metallization ensures excellent reliability Designed for broadband operation. DESCRIPTION
More informationPHOENIX CONTACT - 04/2016. Features
Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.
More informationAPPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPITORS ELECTRICAL CHARTERISTICS The fundamental electrical properties of multilayer ceramic capacitors are as follows: Polarity: Multilayer ceramic capacitors
More informationCFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
More informationIntroduction to Blackbody Sources
Introduction to s This section contains dedicated blackbody sources for low uncertainty calibration of infrared thermometers. A range of portable primary blackbody sources combine high emissivity with
More informationMetal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
More information792A AC/DC Transfer Standard
92A AC/DC Transfer Standard Technical Data Support for your most demanding ac measurement requirements ppm total uncertainty Traceable to national standards range: 2 mv to 00 V Frequency range: Hz to 1
More informationOperating instructions Pressure sensor PN / / 2007
Operating instructions Pressure sensor PN42 704298 / 00 0 / 2007 Contents afety instructions... 3 2 Function and features... 4 3 Function... 5 3. witching function... 5 4 Installation... 5 5 Electrical
More informationLevel Sensor PanCake PR 6251 and Mounting Kit PR 6051
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051 The space-saving solution for simple applications The sensors of the PR 6251 series have been specially designed for simple weighing of silos and horizontal
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function SITRANS LH00 Transmitter for hydrostatic level U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 3 4 5 0,7 Properties Test conditions Value Unit Tol. Inductance 1 100 khz/ 100 mv L 1 10 µh ±20% Inductance 2 100 khz/ 100 mv L 2
More informationEPR Insulated, Heavy Duty HOFR Sheathed Flexible Cables
1 EPR Insulated, Heavy Duty HOFR Sheathed Flexible Cables 0 C 0/0 V *TQ Application For power/lighting services and mains supply or extension leads in situations requiring frequent handling, trailing and
More informationProximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : 0-797575 Fax : 0-79757 E-mail : sales@ashalain.com Proximity Ideal for High Temperatures and Cleaning
More informationPhysics 43, Fall 1995 Lab 1 - Boltzmann's Law
Physics 43, Fall 1995 Lab 1 - Boltzmann's Law Introduction Boltzmann's law states that the probability of occupation of a state of energy E, in a system in equilibrium with a heat bath at temperature T
More informationHigh Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
More informationINSTRUCTION MANUAL. Type: ORP500 C, ORP500 CD, ORP222 CD, ORP223 CD EN Introduction Helpful Operating Tips. 2
ORP/Reference Electrodes INSTRUCTION MANUAL Type: ORP500 C, ORP500 CD, ORP222 CD, ORP223 CD EN 02-05 Table of Contents 1. Introduction. 2 2. Helpful Operating Tips. 2 3. Calibration Procedure 3 3.1. Laboratory
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Number of windings N 2 5 7,6 max. 6 0 2,54 u 0,05 0,6 u 0, 5 7,6 2,8 0 6,6 0,6 Inductance
More informationph electrode Instruction Manual For use with the RAH-210 & RPH-250
ph electrode Instruction Manual For use with the RAH-210 & RPH-250 The information in this manual was current at the time of printing. The most current versions of all Hydro Instruments manuals can be
More informationYJ-BC-270H-G01 High CRI LED
YJ-BC-270H-G01 PRODUCT: HIGH CRI CHIP ON BOARD LED FEATURES: 27 mm 27 mm x 0.5 mm chip-on-board LED Φ19 mm light emission surface 120 emission angle 95 min Ra DESCRIPTION Yuji LED s BC270H series high
More informationSPECIFICATION SHEET : FHS2-UNV-36L
SPECIFICATION SHEET : FHS2-UNV-36L This Is An Original Product From Fulham Co., Inc Description : For Back-up Lighting This driver will operate constant current LED arrays with a working voltage between
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SCOPE...1 EXPLANATION OF PART NUMBER 1 CIRCUIT DIAGRAM & DIMENSION...1 SPECIFICATION..... 2-3 TAPING PACKAGE AND LABEL MARKING 4-5 PRECAUTIONS FOR HANDLING.....6-8
More informationMOC8111 MOC8112 MOC8113
PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor
More informationPressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
More informationRef: HLSR 16-PW; HLSR 32-PW; HLSR 40-PW-000; HLSR 50-PW-000,
Digital Current Transducer HLSR-PW series I P N = 16... 50 A Ref: HLSR 16-PW; HLSR 32-PW; HLSR 40-PW-000; HLSR 50-PW-000, Bitstream output from on onboard Sigma Delta modulator. For the electronic measurement
More information16 Input AC Block I/O Module
6 Input AC Module Cat. No. 79-6A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through
More information32 Input AC Block I/O Module
Input AC Module Cat. No. 79-A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air to flow through
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationBASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LDSR 0.3-TP/SP1 I P R N = 300 ma For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed
More information