A2 3D Printer Installation Instruction
|
|
|
- Baldwin Mills
- 5 years ago
- Views:
Transcription
1 A2 3D Printer Installation Instruction
2 Introduction Attention: 1.Please make sure the package not broken when you receive it. 2.Please check the printer parts according to the packing list. 3. Please contract your supplier if any questions.
3
4
5
6
7
8 Please check printer parts quantity when you receive it.
9 Components Name
10 01 Installation of Bottom Aluminium Profile Name QTY Note 2040*150 Aluminium Profile 2040*400 Aluminium Profile Header Corner Attention: Keep the Aluminium Profile at the same level during assembly. It s better to hold the Aluminium Profile when you lock the Cambox. M5*12 Screw 8 M5 Pillar 8 M5 T Nut *400 Aluminium Profile 2040*150 Aluminium Profile Cambox
11 Installation of Left & Right Aluminium Profile 02 Name QTY Note 2020*400 Aluminium Profile 2040*400 Aluminium Profile Header Corner 2 M5*12 Screw 4 M5 Pillar 4 M5 T Nut *400 Aluminium Profile 2040*400 Aluminium Profile
12 03 Installation of Y Belt Bearing Support Fixing Plate M3*30 Screw M3*7 Pillar M3 Nut Name QTY Note Y Belt Bearing Support Fixing Plate M3*30 Screw 2 M3 Nut 4 1 Y Belt Bearing Support Fixing Plate Unilateral Flange Bearing M3*7 Pillar 2 Unilateral Flange Bearing 4
13 M3*7 Pillar Installation of Y Motor Fixing Plate M3*30 Screw Unilateral Flange Bearing M3*12 cross screw 04 Name QTY Note Y Motor Fixing Plate 1 Y Motor 1 M3*30 Scrwe 1 Unilateral Flange Bearing M3*7 Pillar 1 M3*12 cross screw 3 2 Motor Fixing Plate Y Motor
14 05 Installation of Hotbed Fixing Plate Name QTY Note Hotbed Fixing Plate Pulley M5*10 Pillar Hotbed Fixing Plate M5*10 Pillar 4 1 M5*30 Screw 4 M5 Nut 4 M5*30 Screw M5 Nut Plastic Bearing 4
15 Installation of Hotbed Fixing Plate 06 Pay attention to the Fluency, if it s not smooth enough please adjust the degree of screw tightness
16 07 Installation of Y Axis Name QTY Note M5*14 Screw 6 M5 T Nut 6 Attention : Y support plate should be at the same side M5*14 Screw Hole M5*14 Screw Hole
17 Installation of Y Attention: Keep the hotbed fixing plate and motor fixing plate at the same level. The adge of hotbed fixing plate is the position of the limited switch. 08 Name QTY Note Y Limited Switch Fixing Plate Y Limited Switch 1 M2 Self-tapping Screw M5*12 Screw 2 M5 T Nut 2 1 2
18 09 Installation of Y Axis Belt Let belt go through the hole and lock it with ribbon.
19 Installation of Hotbed *220 Aluminium Profile Name QTY Note M3*30 Screw 4 1 Let the yellow paper side on the top M3 Butterfly Nut 4 Spring 4 Press the Spring during installation Direction of Aluminium Profile
20 11 Installation of X Belt Bearing Fixing Plate Name QTY Note Name QTY Note X Belt Bearing Fixing Plate 1 M5 T Nut 4 M5*30 Screw 4 M3 Nut 4 M5*14 Screw 4 M5*10 Pillar 4 M3*30 Screw 2 M3*7 Pillar 2 M5 Nut 4 Plastic Bearing 4 Unilateral Flange Bearing 4 Attention: Don t tighten too much when you install pulley,or it will have bad influence on the fluency of slicing.
21 Installation of X Motor Fixing Plate 12 Name QTY Note Name QTY Note X Motor Fixing Plate 1 M5 T Nut 4 M5*30 Screw 4 M3 Nut 1 M5*14 Screw 4 M5*10 Pillar 4 M3*30 Screw 1 M3*7 Pillar 1 M5 Nut 4 X Motor 1 Unilateral Flange Bearing 4 M3*12 Screw 3 Plastic Bearing 4 X motor fixing plate and belt fixing plate should be at the same side. Pay attention to the direction of installation.
22 13 Installation of Extruder Name QTY Note pc4-01 Gas-type Fitting 1 Heat Sink 1 Nozzle parts 1 40*10Fan 1 M3*25 Screw 4 M3 Pillar 8 Fan Cover 1 PC4-01 Gas-type Fitting Fan Cover Nozzle Parts
23 Installation of Extruder Fixing Plate 14 Name QTY Note Extruder Fixing Plate M5*30 Screw 4 M5*10 Pilalr 4 M5 Nut 4 Plastic Bearing 4 1
24 15 Installation of Extruder and Fixing Plate Name QTY Note M3*12 Screw 4
25 Installation of Extruder Fixing Plate 16 Name QTY Note 2040*400 Aluminium Profile 1 Adjust the fixing plate until it can slide smoothly, or you need to adjust the degree of tightness. (Before the operation, ensure that the slider is well tightened and cannot be shaked )
26 17 Installation of X Axis Don t lock the belt bearing support now, it needs adjustment in next steps.
27 Installation of X Axis 18 Don t tighten the 4 M5*16 screw now Pay attention to the installation direction
28 19 Installation of 2020*380 Aluminium Profile Name QTY Note 2020*380 Aluminium Alloy Header Corner 2 M5*12 Screw 4 M5 Pillar 4 M5 T Nut 4 1 Keep the two sides at the same level during installation
29 Adjustment of X Axis 20 Attention: Adjust belt support fixing plate to enable Y axis to move smoothly. Meanwhile lock the 4 nut when it s level. (screws in above)
30 21 Installation of Brass Nut Fixing Plate Z Axis Nut Fixing Plate Name QTY Note M5*14 Scrwe 2 M5 T Nut 2 M3*18 Screw 4 M3 Nut 4 1 Keep the both side aluminium profile at the same level during installation M3 Screw Hole
31 Installation of X Limited Switch 22 Name QTY Note X Limited Switch Fixing Plate X Limited Switch 1 M2*12 Self-tapping Screw M5*12 Scrwe 2 M5 T Nut Keep the limited switch fixing plate align at X motor fixing plate
32 23 Installation of X Belt Let belt go through the hole and lock with ribbon.
33 Installation of Z Motor Fixing Plate 24 Name QTY Note Name QTY Note Z Motor Fixing Plate 1 M3*12 Screw 4 Z Motor 1 M4*12 Screw 1 Feeder 1 Gas-type Fitting 1
34 25 Installation of Z Axis Motor Fixing Plate Name QTY Note M5*14 Screw 3 M5 T Nut 3 The edge is almost level
35 Installation of Z Axis Rod 26 Name QTY Note M8 Rod 1 Loose the screw on the coupling, stick rod in and then tighten the screw.
36 27 Installation of Z Axis Limited Switch Name QTY Note Name QTY Note Z Axis Limited Switch Fixing Plate 1 M5*12 Screw Z Axis Limited Switch 1 M5 T Nut 2 2 M2 Self-tapping Screw 2 Install the Limited Switch Fixing Plate in the location above
37 Installation of Screen Fixing Plate 28 Name QTY Note Name QTY Note Screen Fixing Plate 1 M3*7 Pillar 8 Screen Protecting Plate 1 M3 Nut LCD Screen 1 M5*12 Screw 2 M3*30 Screw 4 M5 T Nut 2
38 29 Installation of Screen Fixing Plate
39 Installation of Mainboard Fixing Plate 30 Name QTY Note Mainboard Fixing Plate M5*12 Scrwe 4 M5 T Nut 4 1
40 31 Mainboard Installation Name QTY Note Mainboard 1 M3*14 Scrwe 4 M3*7 Pillar 4 M3 Nut 4
41 Mainboard Connection 32 Attention: Please connect compenents with corresponding wires
42 33 Installation of Mainboard Protecting Plate
43 Please refer to the picture during connection. Please ensure you the connection is right!!!
44
45
46 Installation Complete Congratulations! You have just made yourself a 3D printer! Please contact your 3D printer supplier if any puzzles during using process. Thank you for choosing our products, we will always provide you more services.
E Service E-Series Padlock seires PadlockManual No. Part No. Part No. Part
E-Series Padlock E Service seires Manual Padlock 0 No. Part No. Part No. Part Padlock body Locking plate Ball bearing 0 Shackle Bumper 0 Socket head screw Mx0 Activator cam Identification plate Spring
9 Exploded View and Replacement Parts List
9 Exploded View and Replacement Parts List Model No. : EYFLA4A Exploded View for EYFLA4A Model No. : EYFLA4A Parts List Safety EYFLA4A Ref. No. Part No. Part Name & Description Q'ty Remarks 1 WEYFLA4AK309
HT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
Online Assembly Guide : 4.5 inch Reflector Telescope
Online Assembly Guide : 4.5 inch Reflector Telescope INTRODUCTION Congratulations! You have bought a wonderful telescope. This is a precision optical instrument, and you have many wonderful evenings of
AccuAligning TM Polar Scope for SmartEQ TM Portable German Equatorial GOTO Mount. Installation and User Manual. Product #3130
AccuAligning TM Polar Scope for SmartEQ TM Portable German Equatorial GOTO Mount Installation and User Manual Product #3130 ioptron Corporation, 6E Gill Street, Woburn, MA 01801 www.ioptron.com ioptron
Installation, Maintenance and Operating Instructions
Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance
JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual
JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
Circular Motion and Centripetal Force
[For International Campus Lab ONLY] Objective Measure the centripetal force with the radius, mass, and speed of a particle in uniform circular motion. Theory ----------------------------- Reference --------------------------
ER2 Short-head Electric Chain Hoist
O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
For Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
Unit 3 Centripetal Force
Unit 3 Centripetal Force Objective Circular motion is one of the basic motions among the universe. Electrons in an atom, turning of a car, and revolution of planets all utilize centripetal force. In this
/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
F AX:
W e strive to ensure that our produc t s are of the highest quality and free of manufacturing defec t s or missing p ar t s. Howeve r, if you have any problems with your new product, DO NOT RETURN IT T
SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT
SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.
Important Instructions
Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This
product manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
Product description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3
NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,
FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
SC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
Physics 476LW Advanced Physics Laboratory Michelson Interferometer
Physics 476LW Advanced Physics Laboratory Michelson Interferometer Introduction An optical interferometer is an instrument which splits a beam of light into two beams, each beam follows a different path
Instruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights
Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
nufacturing Company, L.P San Felipe, Suite
REPAIR PARTS (2,3,4) Multi Zone Heat Pump Outdoor Unit 2MXS18GVJUAA 3MXS24JVJUAA 4MXS32GVJUAA nufacturing Company, L.P. 5151 San Felipe, Suite 500 www.amana-hac.com www.amana-hac.com This manual is to
EZ PUSH-TO MANUAL EZ PUSH TO MANUAL. romer-optics.com.
EZ PUSH-TO MANUAL EZ PUSH TO MANUAL romer-optics.com www.romer-optics.com 1 Living Apart, Sharing the Sky 2 CONTENTS 1. EZ PUSH TO Introduction and Specification 4 2. Hardware and Software Installation
Snow Blade Operator s/assembly Instructions
Snow Blade Operator s/assembly Instructions TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5
Ref. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside)
GR 480 / GR 530 Quantity GR480 GR530 Ref. Parts No. Parts Name P A B BS A B BS Remarks 80-1020-100-00 Gear Case Assy 1 1 1 1 1 1 1 80-1020-101-00 Gear Case (Inside) 1 1 1 1 1 1 2 80-1020-103-00 Gear Case
Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials
Potential and Kinetic Energy
Lab VII Potential and Kinetic Energy 1 Introduction This is a lab about the interplay between kinetic and potential energy. While we can calculate forces and accelerations of an object as it moves along
INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
Restoration of Bulle Clock Serial Number 24834
Page 1 20/10/2012 Restored Bulle 24834 Restoration of Bulle Clock Serial Number 24834 Page 2 20/10/2012 Restored Bulle 24834 Photos by kind permission of the owner. The clock as delivered. A tall movement
Domi Mega Phone Exhaust Norton 961
This section shows how to install the Domi Mega Phones IF YOU`RE A DEALER, Consider a donation as this Manual just made your life a lot easier! If you have the Standard exhaust or the Motad Shorties and
Altazimuth Mount. Altazimuth Mount
instruction Manual Orion VersaGo II HD Altazimuth Mount #10104 Orion VersaGo II Altazimuth Mount #10105 #10104 #10105 Providing Exceptional Consumer Optical Products Since 1975 OrionTelescopes.com Customer
Tap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
Service Information Letter SIL # 017
Service Information Letter SIL # 017 Trunnion Adjustment - Double Barrels Only Equipment: Double Barrels With Sloped Trunnions Date Issued: 9-24-03 Additional Reference: SIL # 016 Revised: Revision #:
DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
MAINTENANCE EVALUATION CHECKLIST HYDRAULIC ELEVATORS
Manufacturer: Model: Evaluation Performed By: INTRODUCTION: This checklist will enable the user to make an objective appraisal of the condition of the equipment. Given the variety and complexity of the
Assembly Manual for the Brevard Astronomical Society 16 inch F4.5 Dobsonian Telescope Brevard Astronomical Society P.O. Box 1084 Cocoa, FL 32922
BAS 16 Telescope Manual Rev 1 Assembly Manual for the Brevard Astronomical Society 16 inch F4.5 Dobsonian Telescope Brevard Astronomical Society P.O. Box 1084 Cocoa, FL 32922 TABLE OF CONTENTS SECTION
PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
1 11 A3. Designed by: Brian law All dimensions in mm and (inchs) 3rd Angle projection. Not to Scale Unless otherwise stated
B 2 11 12 37 17 6 2 44 36 43 1 20 3 35 7 18 22 18 16 30 3 6 5 2 18 41 19 26 25 27 42 17 SECTION B-B SCALE 1 : 2 24 21 31 29 1 23 4 9 14 10 11 33 15 37 40 38 32 39 45 28 ITEM NO. PART NUMBER DESCRIPTION
Coulomb s Law. Coloumb s law Appratus Assembly
Coulomb s Law Objectives To demonstrate the veracity of Coulomb's Law. To do this you will show that the Electrostatic Force between two charged bodies is directly proportional to the product of their
RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21
0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0
Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Tools and Supplies Required (not included): Phillips screwdriver 3/8" wrench Drill with 5/32" bit "U" type mounting bracket (i.e., part number
CAUTION! NEVER ATTEMPT TO LOOK AT THE SUN WITH UNLESS YOU HAVE A FULL-APERTURE SOLAR FILTER (NOT INCLUDED WITH
CAUTION! X NEVER ATTEMPT TO LOOK AT THE SUN WITH YOUR APERTURA DOBSONIAN TELESCOPE UNLESS YOU HAVE A FULL-APERTURE SOLAR FILTER (NOT INCLUDED WITH TELESCOPE) INSTALLED OVER THE OPEN END OF THE OPTICAL
INSTALLATION GUIDE OF THE LIGHTRACK II SET-UP
INSTALLATION GUIDE OF THE LIGHTRACK II SET-UP LighTrack II Star Tracker Don t be fooled by the small size of the LighTrack II. It s a very powerful and accurate tracking mount and, with proper polar alignment,
Richter Optica. Instructions for Model: S850 Stereo Zoom Microscope
Richter Optica info@richter-optica.com Instructions for Model: S850 Stereo Zoom Microscope Microscope Head Focus Knob Stage Clips Zoom Knob C-Mount Adapter Eyepiece Focusing Holder Focusing Holder Set
DISC-O-FLEX COUPLING
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA INSTALLATION INSTRUCTIONS DISC-O-FLEX COUPLING R-II-D-01/00-04/08 Page 1 INSTALLATION INSTRUCTIONS (A) BEFORE INSTALLATION 1. R e m o v e t h e c o u p l i n g f
COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE
3 0 15 15 E OWNER S MANUAL COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE 5 W 60 W 30 W 45 W Zhumell customers know that there are plenty of ways to experience the world. They also understand
Conservation of momentum in a central elastic collision with the demonstration track and timer 4 4
Introduction An impulse acting on an object is defined as the change in momentum caused by a force F over a short period of time t. The momentum p is defined as the product of force and time. It is conserved,
WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed
PARTS LIST E Qty. Description Alternative Price Q.ty per pck.
Page 1 R50010327-3 MOTOP.PARTNER'96 230-240/50 110 H90 VALV.COMP.IN.1,8 X FKX E50010001-02 Qty. Alternative Price Q.ty per 007 4.008.0583 10 2 1 MOTOR FAN COVER '96 WITHOUT GRILL 0 0 008 3.099.0049 10
INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
Alco PA AA Diesel Set
30-15-1 30--1 Alco PA AA Diesel Set GL0901 PA A Unit ( lead ) Diesel Engine 1.) Shell ( blue, yellow, silver ) FC-000 *5.00 ( A unit )( Delaware & Hudson )( # 17 ) Shell ( orange, black, silver ) FC-001
THE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
DRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
Precision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
WARNING! Only for use by children over 10. WARNING Science Education Set. This set contains chemicals
EXPERIMENT MANUAL WARNING! Only for use by children over 10 years old. To be used solely under the strict supervision of adults that have studied the precautions given in the experimental set. Contains
S Sapling INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS. advanced time and control systems
INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS Time base: 60 Hz (3-wire system) Quartz (2-wire system) Power input: 85 135 VAC / 60 Hz 7 28 VAC / 60 Hz Current consumption:
Centripetal Force Lab
Centripetal Force Lab Saddleback College Physics Department, adapted from PASCO Scientific 1. Purpose To use a PASCO apparatus containing a rotating brass object to confirm Newton s Second Law of rotation
PARTS LIST E /01. Qty. Description Alternative Price Q.ty per pck.
Page 1 R50010112-1 MOTOP.LI 230/50 BEST COMPL.FIRE 1000 TUV E56010012/01 Qty. Alternative Price Q.ty per 001 5.002.0028 108.11 1 1 FRAME LI 230/50 H.90 2P ALL.CAVI LAT. 0 0 002 3.002.0059 1 25 1 SCREW
nufacturing Company, L.P San Felipe, Suite
Mini-Split Heat Pump Outdoor Unit RXS09LVJU RXS12LVJU RXS15LVJU RXS18LVJU RXS24LVJU REPAIR PARTS nufacturing Company, L.P. 5151 San Felipe, Suite 500 www.amana-hac.com www.amana-hac.com This manual is
Instructions Manual Omegon Dobson Advanced 203
Instructions Manual Omegon Dobson Advanced 203 English version 10.2015 Rev A 1 The Omegon Advanced Dobson 203 Congratulations on the purchase of the new Omegon Advanced Dobson 203 telescope. This telescope
Elastic Properties of Solids (One or two weights)
Elastic properties of solids Page 1 of 8 Elastic Properties of Solids (One or two weights) This is a rare experiment where you will get points for breaking a sample! The recommended textbooks and other
PUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
R310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
SPARE PARTS LIST CHAIN SAWS CS35S, & ,
SPARE PARTS LIST CHAIN SAWS CS35S, 967624714 & 967624715,2016-08 Revision Note item Position description Revision 1 combine 14"easy start CS 35S & CS 35S FA 2 Page O change the article no. from 586998601
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
Double-foliot Japanese Clock
How to Assemble and Use the Supplement Double-foliot Japanese Parts in the Kit Assembly time: Approx. 1 hour and 30 minutes Second for speed adjustment hand receiver Front plate Pillar for the foliots
Collimation with a Takahashi collimating scope
Collimation with a Takahashi collimating scope These instructions describe how you can adjust your Alluna Ritchey-Chrétien telescope to perfection in just a few steps and just a few minutes using a Takahashi
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut
5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
REPAIR PARTS. DX17VS Outdoor Inverter. This manual is to be used by qualified technicians only.
REPAIR PARTS DX17VS Outdoor Inverter DX17VSS181AA DX17VSS241AA DX17VSS01AA DX17VSS61AA DX17VSS421AA DX17VSS481AA DX17VSS601AA This manual is to be used by qualified technicians only. 2018 5151 San Felipe
PARTS LIST / TECHNICAL GUIDE
PARTS LIST / TECHNICAL GUIDE Automatic [SPECIFICATIONS] Item Cal. No. 6R20/6R21 6R20 6R21 3 hands (hour, minute and second hands) Date/Day indication Power reserve indicator Driving system Time indication
WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
Electron Microscopy Sciences INSTRUCTION MANUAL. Stereo Microscopes Non-illuminated Stands
Electron Microscopy Sciences 1 INSTRUCTION MANUAL Stereo Microscopes Non-illuminated Stands Model GL7-207: Binocular, 6.5:1 Zoom Ratio 10X to 65X, smooth ball bearing construction and Model GL7-307: Trinocular,
The Rotation Stabilizer Used For A Gravity. Detector With MAB25 Encoder In DRIACS-G2 System
The Rotation Stabilizer Used For A Gravity Detector With MAB25 Encoder In DRIACS-G2 System JH1KRC Mike Watanabe, JA6XED Hisao Tsukamoto 2012 International EME Conference, Cambridge, U. K. Abstract To detect
Microcare LCD Solar MPPT User Documentation
Microcare LCD Solar MPPT User Documentation 1 CONTENTS 1. INTRODUCTION. 3 1.1. General Description 1.2. Key Features 1.3. Important Notices 1.4. Recommended Array Sizes 1.5. MPPT Description 1.6. MPPT
Mechanics of Solids. Mechanics Of Solids. Suraj kr. Ray Department of Civil Engineering
Mechanics Of Solids Suraj kr. Ray (surajjj2445@gmail.com) Department of Civil Engineering 1 Mechanics of Solids is a branch of applied mechanics that deals with the behaviour of solid bodies subjected
BETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
saxon Instruction Manual saxon Grandeur Brass Telescope High quality optics
saxon High quality optics Instruction Manual saxon Grandeur Brass Telescope WARNING! Do not use the telescope to look at the sun without an appropriate solar filter. Looking at or near the sun can result
SCHIEBER TELESCOPES. Unique, High-Quality Telescopes
SCHIEBER TELESCOPES Unique, High-Quality Telescopes 3.5 Refractor Astrophotography Bundle - Strike 90 PLUS Telescope Assembly Instructions and Digital Eyepiece Camera Instructions. (1) telescope assembly
THE LOSMANDY G-11 MOUNT
Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable
G1033Z Replacement Parts
GZ Replacement Parts PZ0 MOTOR PULLEY - PSS0M SET SCREW M- X PVM V-BELT M- L0 PZ0 SWITCH BRACKET PZ0 MAGNETIC SWITCH MA-0 PZ0 STRAIN RELIEF MGA PZ0 MOTOR CORD AWG X C PZ PLASTIC SWITCH CVR SCREW P HOLE
Experiment Instructions. Deformation of Frames
Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed
College Physics I Laboratory Angular Momentum
College Physics I Laboratory Angular Momentum Purpose PHSX 206N To investigate conservation of angular momentum by directly measuring the moment of inertia and angular velocities for initial and final
Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400
INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN 63840 Application:2002 and newer+ Suzuki Eiger 400 Your safety, and the safety of others, is very important. To help you make informed
INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
Quick Start Guide. The ieq45 GoTo German Equatorial Mount # 8000C
Quick Start Guide The ieq45 GoTo German Equatorial Mount # 8000C PACKAGE CONTENTS Telescope Mount (with built-in GPS) 3.5 Vixen type dovetail saddle (installed on the mount) 8 Losmandy-D type dovetail