SPECIFICATION BO SUNG ELECTRONICS CO., LTD. APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
|
|
|
- Mavis Taylor
- 5 years ago
- Views:
Transcription
1 USTME : : SPECIFICATIN APPLICATIN F APPVAL F ITEM DESCIPTIN CDE MDEL : : : : AXIAL INDUCT (0)TYPE This space is used for customer's approval : DAWN BY Y. H. JEN CHECKED BY APPVED BY S. C. KIM B SUNG ELECTNICS C., LTD.
2 CUSTME : SPECIFICATIN SHEET. F PAT NAME PAT. AXIAL INDUCT MDEL NAME DESCIPTIN (0) TYPE. GENEAL SPECIFICATIN ) SCPE This specfication applies to part number (0)TYPE AXIAL INDUCT for use in electronic appliances which is supplied for. MECHANICAL CHAACTEISTIC AXIAL INDUCT shall conform in size, dimension, and other mechanical properties, to the part drawing attached here to. ) Marking : AXIAL INDUCT shall be permanently and legibly marked with the part number on the specification position. ) Terminal strength : Terminal shall withstand for 0 seconds without breakdown on losing when a static load of Kg is applied in the drawing direction to the terminal at the point where the external load.. ENVINMENTAL & LIFE CHAACTEISTIC ) Temperature rise : Temperature rise of the each winding and core shall be less than ambient + 65, when the AXIAL INDUCT continuously operated at full load(test load) until constant temperature is attained. ) Heatresistance : Immediately after AXIAL INDUCT being placed in room for 96 Hours maintained AT 05 ± ambient temperature, the AXIAL INDUCT shall conform with the above part paragraph ) and also insulation resistance shall be more than 00 MΩ. ) Moisture resistance : Immediately after AXIAL INDUCT being placed in room for 0 Hours in such humidity chamber this is maintained at 90 95% relative humidity and 55 ± temperature and wipped a drop of water, AXIAL INDUCT shall conform with the above paragraph ) and also insulation shall be the 0 MΩ. ) Safety consideration : AXIAL INDUCT shall meet all the requirements subject to IEC950 standards for safety of information technology equipment including electrical business equipment. 5) Solderabilitly : Dip pads in MA flux, 6/6/ solder (Sn/pb/ag)at for 5± seconds EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
3 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. SHEET. MDEL NAME DESCIPTIN F (0) TYPE. DIMENSIN (UNIT:m/m) B L F Ød P ØD C S S A W / S S / =.0 TYPE SYMBL (Unit :mm) A B C ØD Ød L W P T taping ± ±0.5 6± stb ndb per Tolerance stb ndb per Tolerance 0 Bk ± 0% Bn Y 0 Gn Be V MINIMUM INSETIN PITCH : mm Gy W Gd 0 ±5% S 0 ± 0% EVISIN CHECK DAWN CHECKED APPVED SUNG ELECTNICS C.,LTD.
4 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. 5. ELECTICAL CHAACTEISTIC SHEET. MDEL NAME DESCIPTIN (0) TYPE F CDE Inductance (μh) Q (MIN) Test Frequency F L&Q( MHz ) S..F ( MHz ) (MIN) DC esistance (Ω)() ated DC Current ( ma )() CL CDE st nd rd th A0KT00 0.±0% 0. 0 A07KT00 0.7±0% V A0KT00 0.±0% A09KT00 0.9±0% W 5 A07KT00 0.7±0% Y V S 6 A056KT ±0% Gn Be 7 A068KT ±0% Be Gy 8 A08KT00 0.8±0% Gy 9 A00KT00 ±0% BK 0 A0KT00.±0% Bn A05KT00.5±0%.0 50 Gn A08KT00.8±0%.0 0 Gy S A0KT00.±0% A07KT00.7±0% V 5 A0KT00.±0% A09KT00.9±0% W Gd 7 A07KT00.7±0% Y V 50 8 A056KT00 5.6±0% Gn Be 9 A068KT00 6.8±0% Be Gy 0 A08KT00 8.±0% Gy A000KT00 0±0% BK A00KT00 ±0% Bm.5 A050KT00 5±0% Gn B EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
5 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. 5. ELECTICAL CHAACTEISTIC SHEET. MDEL NAME DESCIPTIN (0)TYPE F CDE Inductance (μh) Q (MIN) Test Frequency F L&Q( MHz ) S..F ( MHz ) (MIN) DC esistance (Ω)() ated DC Current ( ma )() CL CDE st nd rd th A080KT00 8±0%.0 0 Bm Gy 5 A00KT00 ±0% A070KT00 7±0% V 7 A00KT00 ±0% A090KT00 9±0% W A070KT00 7±0% Y V Bk 0 A0560KT00 56±0% Gn Be A0680KT00 68±0% Be Gy A080KT00 8±0% Gy A00KT00 00±0% Bk A0KT00 0±0% Bn 5 A05KT00 50±0% Gn S 6 A08KT00 80±0% Gy 7 A0KT00 0±0% A07KT00 70±0% V 9 A0KT00 0±0% A09KT00 90±0% W Bn A07KT00 70±0% Y V A056T00 560±0% Gn Be A068KT00 680±0% Be Gy A08KT00 80±0% Gy 5 A00KT00 000±0% Bn Bk EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
6 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. SHEET. MDEL NAME DESCIPTIN (0) TYPE 5 F SCHEMATIC DIAGAM 7 S F 7. MATEIAL LIST ITEM MATEIAL & DIMENSITIN MANUFACTUE EMAK CE FEITE CE HUH YW ENTEPISE C., LTD. LEAD TDAH 0.50Ø DAE A LEAD WIE C.,LTD. EPXY ESIN DA00BS DAE J FINE CHEMICAL C., LTD. WIE UEW DNG YANG ELECTNICS C., LTD. E076S 5 EPXY UV EPXY HME TWN INDUSTIAL C.,LTD. 6 EPXY 0 HME TWN INDUSTIAL C.,LTD, 7 EPXY CL INK DAE J FINE CHEMICAL C., LTD. 8 TAPE BASE PAPE STC 9 TAPE MASKING STC EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
7 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. 8. UL CAD. SHEET. MDEL NAME DESCIPTIN (0) TYPE 6 F DNG YANG ELECTNICS IND C LTD 660 BANWLI TAIANEWB HWASUNGGUN, KYUNGGID KEA Cost typ Mtl Dsg C AIEIW Polyamideimide EIW NYEIW Polyamide NYPEW NYPEW(F) NYUEW UEW BC Polyesterimide Polyesterimide Polyesteramideimide Polyester Polyester Polyurethane Polyurethane Polyamide Polyamide Polyamide ANSI Type MW5 MW0 MW96 MW MW MW MW75 E076 (S) TI Marking: Company name or "E076" and material designation or marked designation on package or reel, and recognized Component Mark. EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
8 CUSTME : SPECIFICATIN PAT NAME AXIAL INDUCT PAT. SHEET. MDEL NAME DESCIPTIN (0) TYPE 7 F PACKING SPEC INNE BX PACKING Q'TY :.000EA 99mm 75mm 78mm 85mm UTE BX PACKING Q'TY : 0,000EA 0mm 5mm EVISIN CHECK DAWN CHECKED APPVED B SUNG ELECTNICS C.,LTD.
SPECIFICATION BOSUNG ELECTRONICS CO., LTD. APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
: 070600 APPLICATIN F APPVAL F ITEM CDE MDEL : : : : AXIAL INDUCT (0)TYPE This space is used for customer's approval : 008. 05. 0. DAWN BY Y. H. JEN CHECKED BY 008. 05. 0.. APPVED BY J. G. KIM 008. 05.
SPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
NO : 080-0 APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 6.5 X 7.5mm DR)uH (Bulk TAPPING) This space is used for customer's approval DATE : 0.0.07. DRAWN BY Y.H.JEON
SPECIFICATION APPLICATION FOR APPROVAL OF
NO : 0807- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 8 x 8mm DR) 00uH(BULK & TAPPING) This space is used for customer's approval DATE : 008. 07.. DRAWN BY
SPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval CUSTOMER : NO :
NO :00- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 8 x mm DRA).mH(BULK) This space is used for customer's approval DATE : 0.0.0. DRAWN BY E. Y. LEE CHECKED
SPECIFICATION APPLICATION FOR APPROVAL OF
NO : 080- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 0 X mm DRB) uh(0k),bulk This space is used for customer's approval DATE : 0.08.0. DRAWN BY E. Y. LEE CHECKED
SPECIFICATION CUSTOMER : SHEET NO. DATE MODEL NAME DR2-102K-B & T DR 6.5X7.5mm PART NAME. Radial Inductor PART NO.
PART NAME Radial Inductor PART NO. DR)mH(0K) SHEET NO. DATE MODEL NAME DESCRIPTION OF 0 06-09-0 DR-0K-B & T DR 6.5X7.5mm. GENERAL ) SCOPE This specfication applies to part number mh PEAKING COIL for use
SPECIFICATION FOR APPROVAL
PAGE: 1 CONFIGURATION & DIMENSIONS Marking A 100 A : 1. ±0. B : 1. ±0. BC :. ±0. D :.0 ±0. E :.0 typ. F : 6.8 ref. G :.4 ref. C H :.9 ref. D G H E F H SCHEMATIC DIAGRAM (PCB Pattern) MATERIALS a Core Ferrite
SB/PB Series. Multilayer Ferrite Chip Beads. [ PB Series for Large Current ] APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES
![SB/PB Series. Multilayer Ferrite Chip Beads. [ PB Series for Large Current ] APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES](/thumbs/78/76817947.jpg "SB/PB Series. Multilayer Ferrite Chip Beads. [ PB Series for Large Current ] APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES")
YAGEO COPOATION SMD INDUCTO/BEADS Multilayer Ferrite Chip Beads SB/PB Series [ PB Series for Large Current ] APPLICATIONS Prevention of high frequency EMI form computers, printers, VCs, TVs, wireless telephone
ITEM :CHIP FERRITE BEADS APPROVAL SHEET CHIP FERRITE BEADS CUSTOMER : DATE :
ITEM :CHIP FEITE BEADS ESTABLISHMENT 27. 3. 24 APPOVED EVISION 29. 4. 19 Series NO:B94192 APPOVAL SHEET CHIP FEITE BEADS CUSTOME : DATE : You can reapprove only the changed quality request recorded in
Prosperity Dielectrics Co., Ltd. PDC. No.148, Chang-An Rd., Sec.1, Lu-Tsu Shiang, Taoyuan, Taiwan FPFL-Rev.7.
High-Power Low Lead Free Chip Resistors 1. SCOPE..2 Purpose..2 Configuration.... 2 Part Number.....2 2. PERFORMANCE CHARACTERISTICS....3 2.1 Power Derating Curve by Ambient Temperature....3 2.2 Mechanical
Approval Sheet. for. Carbon Film Resistors. CFR series YAGEO CORPORATION
Approval Sheet for Carbon Film Resistors CFR series ±2% & ±5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Shin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286 URL:
1/10 FEATURES HOW TO ORDER DIMENSIONS
OUTLINE Wire wound chip inductor is a perfect combine by means of combining high precision coil framework with superb wound technology.comparable with traditional inductor, it is improved technology, reduced
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
NTC Thermistor:TTC05 Series
NTC Thermistor:TTC05 Series Ф5 mm Lead Type for Temperature Sensing/Compensation Features. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating
FMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
INPAQ Global RF/Component Solutions
MIP P Series Specification Product Name Series Power Inductor MIP P Series Size EIAJ Multilayer Power Inductor (MIP P Series) Engineering Spec. PART NUMBER AND CHARACTERISTICS TABLE INPAQ MIP-P series
PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
Configurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
SPECIFICATIONS. CUSTOMER ITEM MODEL NAME PART No DATE 승 인 정식승인 ( ) 한도승인 ( )
승 인 정식승인 ( ) 한도승인 ( ) SPECIFICATIONS ITEM MODEL NAME PART No LINE FILTER NSH-103 UU101-10mH (H-TYPE) 검토심사승인 승인유효기간승인일로부터년 신청회사명 주 소 TEL 0-689-918 FAX 0-689-868 개정이력 MODEL NO NSH-103 PART NO UU101-10mH
Lead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
Approval Sheet. for. Metal Film Resistors. MFR series YAGEO CORPORATION
Approval Sheet for Metal Film Resistors MFR series 1% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286 URL: www.yageo.com
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
Specifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
Anti-Surge THICK FILM CHIP FIXED RESISTOR
Anti-Surge THICK FILM CHIP FIXED ESISTO FEATUES Miniature and light weight. Suit for reflow and wave flow solder. High power,substantially increase the ability of anti-surge Stable electrical capability,
Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
SPECIFICATIONS. CUSTOMER ITEM MODEL NAME PART No DATE 승 인 정식승인 ( ) 한도승인 ( )
승 인 정식승인 ( ) 한도승인 ( ) SPECIFICATIONS ITEM MODEL NAME PART No LINE FILTER NSH-101 UU101-20mH (H-TYPE) DATE 2015-5-6 검토심사승인 승인유효기간승인일로부터년 신청회사명 주 소 TEL 02-2689-918 FAX 02-2689-8628 개정이력 MODEL NO NSH-101
Metallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
Shielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
Chip Type Y5U Temperature Characteristics
Chip Type Y5U Temperature Characteristics Features Dimensions Large capacitance in small size Temperature characteristics of Y5U (within +% to 56% in the range of 5 C to +85 C) Features equivalent to X7V.
AXIAL LEADED INDUCTORS
AXIAL LEADED INDUCTORS ISO-900 Registered OPERATING TEMP -5~+5 C (Including self-generated heat) FEATURES Extremely reliable inductors that are ideal for automatic insertion Highly efficient automated
Muti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
Approval Sheet. for. Anti-Arc Resistors. AAR series ±5% YAGEO CORPORATION
Approval Sheet for Anti-Arc Resistors AAR series ±5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Xindian, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286 Xindian Plant:
SPECIFICATION FOR APPROVAL
REF : PAGE : 1 Ⅰ. CONFIGURATION & DIMENSIONS: 1 2 Marking white color A 4 B 3 C A : 9.00±0.3 m/m B : 5.40±0.2 m/m C : 3.60±0.2 m/m E : 2.50 typ. F : 1.00 typ. J : 9.50 ref. K : 3.70 ref. m/m m/m m/m m/m
DATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors
Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness
SFI Electronics Technology APPROVAL SHEET. Customer Information. Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name Part No. SFI ELECTRONICS TECHNOLOGY CORP. INC. SMD GDT series Lot
NTC Thermistor:TTF Type
Features 1. RoHS compliant 2. Radial leaded insulation film coated 3. -40 ~ +100 operating temperature range 4. Agency recognition: UL /cul Recommended Applications 1. Home appliances (air conditioner,
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
SPECIFICATION FOR APPROVAL
F, NO. 16, Sec. 2 Chung Yang S Rd., Peitou, Taipei, Taiwan. TEL : 88622891202, 886228952201 FAX : 88622891206, 886228956207 www.txccorp.com SPECIFICATION FOR APPROVAL CUSTOMER : PRODUCT TYPE : SMD SEAM
Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
Multi-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BP 3 T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (1MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS S-01
Specification TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS123-000S-01 1 OF 4 1999/09/30 1. GENERAL SCOPE THIS SPECIFICATION COVERs THE GENERAL REQUIREMENTs
NTC Thermistor:TCF Type
Features 1. RoHS compliant 2. Body size ψ3mm 3. Radial lead resin coated 4. -40 ~ +100 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /cul Recommended
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
S P E C I F I C A T I O N S
TO : 2009-09-14 S P E C I F I C A T I O N S PRODUCT : CERAMIC CAPACITOR MODEL : DA (X1,Y1) SERIES Manufacturer Customer WRITTEN CHECKED APPROVED WRITTEN CHECKED APPROVED 9/14 9/14 9/14 / / / DONG IL ELECTRONICS
Approval Sheet. for. Cement Resistors Axial Lead Type. SQP & NSP series YAGEO CORPORATION
Approval Sheet for Cement Resistors Axial Lead Type SQP & NSP series 5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-0100
PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0.
CUSTOMER :. DATE : 213. 3. 29. REV : Rev. 1.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 3K MODEL NAME : LLDMWW-15K21A (Type II Lens - H:16 V:7 ) LLDMWW-15K22A (Type III Lens - H:135 V:6 ) LLDMWW-15K23A
Configurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 5700K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 2.0.
CUSTOMER :. DATE : 213. 4. 23. REV : Rev. 2.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 57K MODEL NAME : LLDMWW-15K71A (Type II Lens - H:16 V:7 ) LLDMWW-15K72A (Type III Lens - H:135 V:6 ) LLDMWW-15K73A
RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
NTC Thermistor:TTC03 Series
Features 1. RoHS compliant 2. Body size Ф3mm 3. Radial lead resin coated 4. -40 ~ +125 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /CQC Recommended
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
DATA SHEET. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China
DATA SHEET Product Name Complete Pb-Free Thick Film Chip Resistors Part Name PF Series Uniroyal Electronics Global Co., Ltd. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China
Current Sensing Resistors FBF Series Metal Paste Type High Power Lead Free Chip Resistors
1. SCOPE 1.1 Purpose Current Sensing Resistors Fixed Thick-Film Metal Paste High-Power Chip Resistors. Rated power up to 2W and apply to Current Sensing in : Consumer Electronics SMPS M/B BTC Portable
SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000
![SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000](/thumbs/96/126844100.jpg "SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000")
Sunlord Specifications for Multi-layer Chip Ferrite Bead Page 1 of 16 SPECIFICATIONS Customer Product Name Sunlord Part Number Multi-layer Chip Ferrite Bead G Series Customer Part Number [ New eleased,
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
Interference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
Fusible Resistors Ambient Temperature ( )
Fusible Resistors RATING: C.1 Rated power is the value of max. load voltage specified at the ambient temperature of 70. When the ambient temperature surpasses the above mentioned temperature, the value
AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
Approval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
WLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/114057148.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 1,65 4,85 1,65 Properties Test conditions Value Unit Tol. Inductance 100 khz/ 10 ma L 3.3 µh ±20% Rated Current ΔT = 50 K I R 6.8
Multi-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
Approval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
YEAR DATE: DAY MONTH. TDK Corporation Sales. Engineering. Marketing Group. Business Group. Magnetics APPROVED CHECKED.
SPECIFICATION SPEC. No.C425NAA00007-1 DATE Sep. 9. 2015 To Xiamen Holder Electronics Co.,Ltd. CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME THIN FILM INDUCTOR TFM252010ALM-MTAA Series RECEIPT CONFIRMATION
CHIP FERRITE INDUCTORS
CHIP FERRITE INDUCTORS Features. Perfect for high density surface mount applications since magnetic shield dliminates crosstalk. 2. Highly reliable in wide temperature and humidity range. Superior Q characteristics
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/113221822.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 9,0 Inductance L 100 khz/ 10mA 10 µh ±20% Rated Current I R ΔT = 40 K 9.4 A max. 2,2 ±0,3
Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED
Features Top view white LED ( 5.6 x 3.0 x 0.77 mm ) for BLU High luminous flux output High current capability Base on InGaN / GaN technology Wide view angle ( X : 120 / Y : 120 ) IR reflow soldering Zener
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
INPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
SMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
PRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
WIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/71/65940192.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 00 khz/ 0. ma L 2x5 µh typ. 2 3 2,7 0,3 4 Impedance 00 MHz Z 500 Ω ±25% Rated
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206. Product specification May 30, 2005 V.
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206 2 SCOPE This specification describes RL0805/1206 low ohmic high power chip resistors with lead-free
SMD Shielded Power Inductor. TIS8D43GS Series. Features. Applications. Dimensions
SMD Shielded Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter of portable equipment Camcorder, LCD television
All part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/76/73094830.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv L 15 µh ±30% Rated Current ΔT = 30 K I R 0.62 A max. Saturation
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
CPTC Thermistor:PT Series
Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature
K04 TYPE -40 C +85 C 20000H
K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/82/84882950.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 3 4 5 0,7 Properties Test conditions Value Unit Tol. Inductance 1 100 khz/ 100 mv L 1 10 µh ±20% Inductance 2 100 khz/ 100 mv L 2
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/76/73383489.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 1,6 u 0,2 0,45 u 0,2 Solder Resist Properties Test conditions Value Unit Tol. Inductance 100 khz/ 10 ma L 5.6 µh ±20% Rated Current
Approval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
Approval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
TECHNICAL INFORMATION
TECHNICAL INFORMATION RATED PRIMARY OLTAGE () This is the supply assigned to the transformer by the manufacturer. RATED SECONDARY OLTAGE () This is the secondary output assigned to the transformer when