Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
|
|
- Cecilia Cain
- 5 years ago
- Views:
Transcription
1 Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION CONTRACT INFO Legacy Contract # for Plow Repair & Maintenance Parts (i.e. s, Nose Pieces, Shoes and Accessories for Plows) Of the 5 Contracts awarded 3 of the Contractors (Valk Manufacturing, Winter Equipment Company, and AFS Energy Systems) allow for COSTARS participation while of the Contractors (Kennametal Inc and Highway Equipment & Supply Company) do not allow for COSTAR's participation) Contract Number & Title Legacy Contract # "Plow Repair and Maintenance Parts"" Number of Suppliers 5 Validty Period DGS Point of Contact Contact Phone # 0 June 007 thru 3 May 009 (3 Renewal Years Possible) Richard Woodworth rwoodworth@state.pa.us PRICING HIGHLIGHTS PROCESS TO PURCHASE This contract is a mix of 39 line item specific items with an additional Discount from List Price line item to cover the miscellaneous items format. Place purchase order for the equipment in accordance with the contract's terms & conditions (to include the "Special Contract Terms and Condistions) Units covered are primarily those as used by PA-DOT Unit specifications conform with PA-DOT requirements
2 REPRINT Page of Contract No Contract Original Approval Date: 05/3/007 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number With Us: 06 Supplier Name/Address: ADVANCED FABRICATION SERVICES DBA AFS ENERGY SYSTEMS 40 OAK ST LEMOYNE PA Supplier Telephone No: Supplier Fax No.: Purchasing Agent: Name: Rich Woodworth Phone: Fax: Valid from/to: 06/0/007-05/3/009 Please Deliver To: To be determined at the time of the Purchase Order unless specified below Your Quotation: Collective No.: Our Quotation: Date: Payment Terms: NET 30 The Commonwealth of Pennsylvania, through the Department of General Services, accepts the submission of the Bidder/Contractor for the awarded item(s) at the price(s) set forth below in accordance with: ) the RFQ submitted by the Bidder/Contractor, if any; ) the documents attached to this Contract or incorporated by reference, if any, and 3) the contract terms and conditions stored on the website address at for this type of Contract as of the date of the RFQ, if any, or other solicitation for this Contract, all of which, as appropriate, are incorporated herein by reference. When the Bidder/Contractor receives an order from a Commonwealth agency, the order constitutes the Bidder/Contractor's authority to furnish the item(s) to the agency at the time(s) and place(s) specified in the order. RFQ, as used herein, means Request for Quotations, Invitation for Bids, Invitation to Qualify, or Request for Proposals, as appropriate. Item Material/Service Desc PLATE,SHOE ADAPTER BRACKET VALK 40 Est Qty UOM Net Price Per Unit Total 0.00 Each 66.5 Each 0.00 In accordance with PA-DOT Spec #EQN-6B General Requirements for all Items: Header Text SEE LAST PAGE FOR ESTIMATED TOTAL VALUE INFORMATION Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
3 Item... Material/Service Desc Contractor Point-of-Contact: REPRINT Page of Contract No Contract Original Approval Date: 05/3/007 Supplier Name: ADVANCED FABRICATION SERVICES DBA AFS ENERGY SYSTEMS Est Qty UOM Net Price Per Unit Total - Tim Shatto - Phone (Fabrication Office) - Fax info@afsenergy.com This Contractor has agreed to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 5, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
4 REPRINT Page of 4 Contract No Contract Original Approval Date: 05/3/007 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number With Us: 7593 Supplier Name/Address: HIGHWAY EQUIPMENT & SUPPLY CO PO Box 7 DRUMS PA 8-07 USA Supplier Telephone No: Supplier Fax No.: Purchasing Agent: Name: Rich Woodworth Phone: Fax: Valid from/to: 06/0/007-05/3/009 Please Deliver To: To be determined at the time of the Purchase Order unless specified below Your Quotation: Collective No.: Our Quotation: Date: Payment Terms: NET 30 The Commonwealth of Pennsylvania, through the Department of General Services, accepts the submission of the Bidder/Contractor for the awarded item(s) at the price(s) set forth below in accordance with: ) the RFQ submitted by the Bidder/Contractor, if any; ) the documents attached to this Contract or incorporated by reference, if any, and 3) the contract terms and conditions stored on the website address at for this type of Contract as of the date of the RFQ, if any, or other solicitation for this Contract, all of which, as appropriate, are incorporated herein by reference. When the Bidder/Contractor receives an order from a Commonwealth agency, the order constitutes the Bidder/Contractor's authority to furnish the item(s) to the agency at the time(s) and place(s) specified in the order. RFQ, as used herein, means Request for Quotations, Invitation for Bids, Invitation to Qualify, or Request for Proposals, as appropriate. Item Material/Service Desc STEEL 5/8X6X0FT Est Qty UOM Net Price Per Unit Total 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-6A STEEL 5/8X6X0FT-0 / 0.00 Each 48.3 Each 0.00 In accordance with PA-DOT Spec #EQN-6C SEE LAST PAGE FOR ESTIMATED TOTAL VALUE INFORMATION Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
5 REPRINT Page of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: HIGHWAY EQUIPMENT & SUPPLY CO Item Material/Service Desc STEEL,COVER BLADE FT Est Qty UOM Net Price Per Unit Total 0.00 Each 48.3 Each 0.00 In accordance with PA-DOT Spec #EQN-6D STEEL,CARBIDE TIP 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7A CARBIDE TIP 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7A STEEL, 5/8X8XFT 0.00 Each 4.48 Each 0.00 In accordance with PA-DOT Spec #EQN-6F STEEL,FOR LOADER 0.00 Each 0.97 Each 0.00 In accordance with PA-DOT requirements STEEL,COVER BLADE 5/8X6X Each Each STEEL,COVER BLADE /X6X Each Each 0.00 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
6 REPRINT Page 3 of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: HIGHWAY EQUIPMENT & SUPPLY CO Item Material/Service Desc Est Qty UOM Net Price Per Unit Total STEEL,COVER BLADE /X6X 0.00 Each 48.3 Each STEEL,COVER BLADE /X6X 0.00 Each 6.59 Each STEEL,GRADER BLADE 3/4X8X Each 83.8 Each STEEL,GRADER BLADE3/4X8X Each Each CARBIDE,TUNGSTN 48" Grader 0.00 Each Each CARBIDE,TUNGSTN 36" Grader 0.00 Each Each Misc Repair & Maint Parts In accordance with Bucyrus Blades Price-List showing Fax Date of May, 007 (as provided by Highway Equipment & Supply Company) General Requirements for all Items: Header Text Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
7 REPRINT Page 4 of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: HIGHWAY EQUIPMENT & SUPPLY CO Item... Material/Service Desc Contractor Point-of-Contact: Est Qty UOM Net Price Per Unit Total - Paul Ferdinand - Phone Fax Cell This Contractor has opted NOT to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 50, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
8 REPRINT Page of 4 Contract No Contract Original Approval Date: 05/3/007 Contract Change Approval Date: 07/03/007 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number With Us: 450 Supplier Name/Address: KENNAMETAL INC 600 TECHNOLOGY WAY LATROBE PA USA Supplier Telephone No: Supplier Fax No.: Purchasing Agent: Name: Rich Woodworth Phone: Fax: Valid from/to: 06/0/007-05/3/009 Please Deliver To: To be determined at the time of the Purchase Order unless specified below Your Quotation: Collective No.: Our Quotation: Date: Payment Terms: NET 30 The Commonwealth of Pennsylvania, through the Department of General Services, accepts the submission of the Bidder/Contractor for the awarded item(s) at the price(s) set forth below in accordance with: ) the RFQ submitted by the Bidder/Contractor, if any; ) the documents attached to this Contract or incorporated by reference, if any, and 3) the contract terms and conditions stored on the website address at for this type of Contract as of the date of the RFQ, if any, or other solicitation for this Contract, all of which, as appropriate, are incorporated herein by reference. When the Bidder/Contractor receives an order from a Commonwealth agency, the order constitutes the Bidder/Contractor's authority to furnish the item(s) to the agency at the time(s) and place(s) specified in the order. RFQ, as used herein, means Request for Quotations, Invitation for Bids, Invitation to Qualify, or Request for Proposals, as appropriate. Item Material/Service Desc STEEL,CARBIDE TIP 6X36 Est Qty UOM Net Price Per Unit Total 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-7A CARBIDE TIP 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7A SEE LAST PAGE FOR ESTIMATED TOTAL VALUE INFORMATION Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
9 REPRINT Page of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: KENNAMETAL INC Item Material/Service Desc CARBIDE,TUNGSTN 6X36 Est Qty UOM Net Price Per Unit Total 0.00 Each 04.5 Each 0.00 In accordance with PA-DOT Spec #EQN-7B CARBIDE,TUNGSTN 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7B ZDNU-SHOE ROUND STEEL,WITH BRACKET 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN SHOE,CARBIDE WEARSHOE VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN SHOE,CARBIDE,MOUL DBOARD INSERT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-059 VALK CARBIDE,TUNGSTN 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-7 PLOW TIP 5 X 36 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
10 REPRINT Page 3 of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: KENNAMETAL INC Item Material/Service Desc CARBIDE,TUNGSTN In accordance with PA-DOT Spec #EQN-7 Est Qty UOM Net Price Per Unit Total 0.00 Each Each 0.00 PLOW TIP 5 X CARBIDE,DOUBLE EDGE 48X Each Each CARBIDE,DOUBLE EDGE 36X Each Each CARBIDE,TUNGSTN 48" Grader 0.00 Each Each CARBIDE,TUNGSTN 36" Grader 0.00 Each Each Misc Repair & Maint Parts In accordance with Kennametal Master PA Pricing Price-List Dated June, 007 (as provided by Kennametal Inc) General Requirements for all Items: Header Text Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
11 REPRINT Page 4 of 4 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: KENNAMETAL INC Item... Material/Service Desc Contractor Point-of-Contact: Est Qty UOM Net Price Per Unit Total - Terry Manway (Sales & Marketing Manager) - Phone Fax terry.manway@kennametal.com This Contractor has opted NOT to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 499, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
12 REPRINT Page of 6 Contract No Contract Original Approval Date: 05/3/007 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number With Us: 675 Supplier Name/Address: WINTER EQUIPMENT CO INC 900 JOSEPH LLOYD PKWY WILLOUGHBY OH USA Supplier Telephone No: Supplier Fax No.: Purchasing Agent: Name: Rich Woodworth Phone: Fax: Valid from/to: 06/0/007-05/3/009 Please Deliver To: To be determined at the time of the Purchase Order unless specified below Your Quotation: Collective No.: Our Quotation: Date: Payment Terms: NET 30 The Commonwealth of Pennsylvania, through the Department of General Services, accepts the submission of the Bidder/Contractor for the awarded item(s) at the price(s) set forth below in accordance with: ) the RFQ submitted by the Bidder/Contractor, if any; ) the documents attached to this Contract or incorporated by reference, if any, and 3) the contract terms and conditions stored on the website address at for this type of Contract as of the date of the RFQ, if any, or other solicitation for this Contract, all of which, as appropriate, are incorporated herein by reference. When the Bidder/Contractor receives an order from a Commonwealth agency, the order constitutes the Bidder/Contractor's authority to furnish the item(s) to the agency at the time(s) and place(s) specified in the order. RFQ, as used herein, means Request for Quotations, Invitation for Bids, Invitation to Qualify, or Request for Proposals, as appropriate. Item Material/Service Desc STEEL,CARBIDE TIP 6X36 Est Qty UOM Net Price Per Unit Total 0.00 Each 4.50 Each 0.00 In accordance with PA-DOT Spec #EQN-7A CARBIDE TIP 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7A SEE LAST PAGE FOR ESTIMATED TOTAL VALUE INFORMATION Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
13 REPRINT Page of 6 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: WINTER EQUIPMENT CO INC Item Material/Service Desc CARBIDE,TUNGSTN 6X36 Est Qty UOM Net Price Per Unit Total 0.00 Each 4.50 Each 0.00 In accordance with PA-DOT Spec #EQN-7B CARBIDE,TUNGSTN 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7B ZDNU-SHOE ROUND STEEL,WITH BRACKET 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN SHOE,CARBIDE WEARSHOE VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN PLATE,SHOE ADAPTER BRACKET VALK Each 4.50 Each 0.00 In accordance with PA-DOT Spec #EQN-6B SHOE,CARBIDE,MOUL DBOARD INSERT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-059 VALK 40 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
14 REPRINT Page 3 of 6 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: WINTER EQUIPMENT CO INC Item Material/Service Desc SHOE,STEEL,MOULDB OARD SHOE In accordance with PA-DOT Spec #EQN-47E Est Qty UOM Net Price Per Unit Total 0.00 Each Each 0.00 WITHOUT CARBIDE, VALK PIN,CLEVIS,STEEL 0.00 Each 7.00 Each 0.00 In accordance with PA-DOT Spec #EQN BUMPER,CURB-STEEL, LEFT VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN BUMPER,CURB-STEEL, RIGHT VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN GUARD,PLOW STEEL 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN RUBBER /X0X0FT 0.00 Each 4.8 Each 0.00 In accordance with PA-DOT Spec #EQN-6E GUARD,PLOW STEEL-LEFT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-49 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
15 REPRINT Page 4 of 6 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: WINTER EQUIPMENT CO INC Item Material/Service Desc Est Qty UOM Net Price Per Unit Total GUARD,PLOW STEEL-RIGHT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN CARBIDE,TUNGSTN 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-7 PLOW TIP 5 X STEEL,FOR LOADER 0.00 Each Each 0.00 In accordance with PA-DOT Requirements 70 Misc Repair & Maint Parts 0.00 Each 0.80 Each 0.00 In accordance with Winter Equipment Company Price-Lists: "Plow Repair Maintenance Parts (INITIAL)" and "Plow Bolts, Nuts and Washers (INITIAL)"(as provided by Winter Equipment Company) STEEL,COVER BLADE /X6X Each Each STEEL,COVER BLADE /X6X 0.00 Each Each 0.00 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
16 REPRINT Page 5 of 6 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: WINTER EQUIPMENT CO INC Item Material/Service Desc Est Qty UOM Net Price Per Unit Total STEEL,GRADER BLADE 3/4X8X Each 8.89 Each STEEL,GRADER BLADE3/4X8X Each 96.7 Each CARBIDE,TUNGSTN 36X Each Each CARBIDE,TUNGSTN 48" Grader 0.00 Each Each CARBIDE,TUNGSTN 36" Grader 0.00 Each Each Misc Repair & Maint Parts In accordance with Winter Equipment Company Price-Lists: "Plow Repair Maintenance Parts (INITIAL)" and "Plow Bolts, Nuts and Washers (INITIAL)"(as provided by Winter Equipment Company) General Requirements for all Items: Header Text Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
17 REPRINT Page 6 of 6 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: WINTER EQUIPMENT CO INC Item... Material/Service Desc Contractor Point-of-Contact: Est Qty UOM Net Price Per Unit Total - Rayanna Parison (Bid Coordinator/Inside Sales) - Phone or Fax or rayana@winterequipment.com - Eric Fox (Regional Sales Manager) - Phone or Fax or Cell This Contractor has agreed to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 500, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
18 REPRINT Page of 7 Contract No Contract Original Approval Date: 05/3/007 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number With Us: 7798 Supplier Name/Address: VALK MANUFACTURING COMPANY PO Box 48 NEW KINGSTOWN PA USA Supplier Telephone No: Supplier Fax No.: Purchasing Agent: Name: Rich Woodworth Phone: Fax: Valid from/to: 06/0/007-05/3/009 Please Deliver To: To be determined at the time of the Purchase Order unless specified below Your Quotation: Collective No.: Our Quotation: Date: Payment Terms: NET 30 The Commonwealth of Pennsylvania, through the Department of General Services, accepts the submission of the Bidder/Contractor for the awarded item(s) at the price(s) set forth below in accordance with: ) the RFQ submitted by the Bidder/Contractor, if any; ) the documents attached to this Contract or incorporated by reference, if any, and 3) the contract terms and conditions stored on the website address at for this type of Contract as of the date of the RFQ, if any, or other solicitation for this Contract, all of which, as appropriate, are incorporated herein by reference. When the Bidder/Contractor receives an order from a Commonwealth agency, the order constitutes the Bidder/Contractor's authority to furnish the item(s) to the agency at the time(s) and place(s) specified in the order. RFQ, as used herein, means Request for Quotations, Invitation for Bids, Invitation to Qualify, or Request for Proposals, as appropriate. Item Material/Service Desc STEEL 5/8X6X0FT Est Qty UOM Net Price Per Unit Total 0.00 Each 8.00 Each 0.00 In accordance with PA-DOT Spec #EQN-6A STEEL 5/8X6X0FT-0 / 0.00 Each 9.00 Each 0.00 In accordance with PA-DOT Spec #EQN-6C SEE LAST PAGE FOR ESTIMATED TOTAL VALUE INFORMATION Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
19 REPRINT Page of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc STEEL,COVER BLADE FT Est Qty UOM Net Price Per Unit Total 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-6D Valid from 05//007 to 05/30/007 Gross Price 9.00 USD EA STEEL,CARBIDE TIP 6X Each 93.7 Each 0.00 In accordance with PA-DOT Spec #EQN-7A CARBIDE TIP 6X Each 4.96 Each 0.00 In accordance with PA-DOT Spec #EQN-7A CARBIDE,TUNGSTN 6X Each 0.4 Each 0.00 In accordance with PA-DOT Spec #EQN-7B CARBIDE,TUNGSTN 6X Each Each 0.00 In accordance with PA-DOT Spec #EQN-7B NOSE PIECE,STEEL 7,73 PLOW 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-48 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
20 REPRINT Page 3 of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc Material PO Text Est Qty UOM Net Price Per Unit Total EQN NOSE PIECE,STEEL 7BA,73 PLOW 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-48H ZDNU-SHOE ROUND STEEL,WITH BRACKET 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN SHOE,CARBIDE WEARSHOE VALK Each 9.00 Each 0.00 In accordance with PA-DOT Spec #EQN PLATE,SHOE ADAPTER BRACKET VALK Each.00 Each 0.00 In accordance with PA-DOT Spec #EQN-6B SHOE,CARBIDE,MOUL DBOARD INSERT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-059 VALK SHOE,STEEL,MOULDB OARD SHOE 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN-47E WITHOUT CARBIDE, VALK 73 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
21 REPRINT Page 4 of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc PIN,CLEVIS,STEEL Est Qty UOM Net Price Per Unit Total 0.00 Each 5.00 Each 0.00 In accordance with PA-DOT Spec #EQN BUMPER,CURB-STEEL, LEFT VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN BUMPER,CURB-STEEL, RIGHT VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN RUBBER /X0X0FT 0.00 Each 5.00 Each 0.00 In accordance with PA-DOT Spec #EQN-6E GUARD,PLOW STEEL-LEFT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN GUARD,PLOW STEEL-RIGHT 0.00 Each Each 0.00 In accordance with PA-DOT Spec #EQN STEEL, 5/8X8XFT 0.00 Each 3.00 Each 0.00 In accordance with PA-DOT Spec #EQN-6F Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
22 REPRINT Page 5 of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc Est Qty UOM Net Price Per Unit Total NOSE PIECE,STEEL FOR 7, Each Each 0.00 In accordance with PA-DOT Spec #EQN-48G NOSE PIECE,STEEL FOR 7, Each Each 0.00 In accordance with PA-DOT Spec #EQN-48I NOSE PIECE,STEEL FOR VALK Each Each 0.00 In accordance with PA-DOT Spec #EQN-48E CARBIDE,TUNGSTN 0.00 Each 0.36 Each 0.00 In accordance with PA-DOT Spec #EQN-7 PLOW TIP 5 X STEEL,FOR LOADER 0.00 Each Each 0.00 In accordance with PA-DOT Requirements CARBIDE,DOUBLE EDGE 48X Each 59. Each CARBIDE,DOUBLE EDGE 36X Each Each 0.00 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
23 REPRINT Page 6 of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc Est Qty UOM Net Price Per Unit Total STEEL,COVER BLADE /X6X 0.00 Each 79.0 Each STEEL,GRADER BLADE 3/4X8X Each Each STEEL,COVER BLADE /X6X 0.00 Each 7.60 Each STEEL,GRADER BLADE3/4X8X Each 8.00 Each CARBIDE,TUNGSTN 36X Each 90.7 Each STEEL,COVER BLADE /X6X Each Each CARBIDE,TUNGSTN 36" Grader 0.00 Each Each CARBIDE,TUNGSTN 48" Grader 0.00 Each 3.8 Each 0.00 Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
24 REPRINT Page 7 of 7 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc Est Qty UOM Net Price Per Unit Total STEEL,COVER BLADE 5/8X6X Each 8.00 Each Misc Repair & Maint Parts In accordance with Valk Manufacturing Price-List titled "Valk Snowplows" dated 5//07(as provided by Valk Manufacturing Company) 530 Misc Repair & Maint Parts In accordance with Valk Manufacturing Price-List titled "Valk Replacement Price List" dated 7//96(as provided by Valk Manufacturing Company) General Requirements for all Items: Header Text... Contractor Point-of-Contact: - Dan C. Cribari - Phone Ext. - Fax plowsales@valkmfg.com - Robert P. Lang - Phone Fax rlang@valkmfg.com This Contractor has agreed to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 500, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
25 REPRINT Page 8 of 8 Contract No Contract Original Approval Date: 05/3/007 Supplier Name: VALK MANUFACTURING COMPANY Item Material/Service Desc Header Text... Contractor Point-of-Contact: Est Qty UOM Net Price Per Unit Total General Requirements for all Items: - Dan C. Cribari - Phone Ext. - Fax plowsales@valkmfg.com - Robert P. Lang - Phone Fax rlang@valkmfg.com This Contractor has agreed to participate in the COSTARS program. This Contractor Does Not meet Federal Disadvantaged Business Enterprise ("DBE") participation requirements as defined in federal law and in regulations set forth in 49 C.F.R. Part 6. No futher information for this contract. Estimated Total Value: $ 500, Currency: USD Integrated Environment Systems Form Name: ZM_SFRM_STD_MMCO_L, Version.0, Created on 05/7/003, Last changed on 03/9/005.
26 BID #CN Page of REVISION # 7 April 007. BLADES: COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION SPECIFICATIONS FOR TUNGSTEN CARBIDE CUTTING EDGES The Blade shall be flat, hot-rolled finished steel within the range of SAE 00 to SAE Holes shall be /6 square, counter bored to receive 5/8 diameter plow bolts. Location and spacing of the holes shall be as shown on the attached drawing(s)..3 The groove for the carbide inserts shall be milled in the center of the blade edge..4 Center of the holes shall be within /3 of established centerline.. TUNGSTEN CARBIDE INSERTS:. The inserts shall be a high shock WC grade or tungsten carbide with to.5 percent cobalt content. Density: 4. minimum to 4.6 maximum grams per cubic centimeter. Hardness: 87.5 minimum to 89.0 maximum Rockwell A scale. Transverse Rupture Strength: 350,000 minimum, pounds per square inch. Porosity: Based on testing in accordance with ASTM designation B A06 B0 C00. The carbide insert manufacturer shall furnish certification to the Department of Transportation, that inserts meet the specifications as set forth in. and that the inserts meet virgin tungsten carbide quality specifications..3 The inserts shall be a trapezoid design of the following dimensions: Height: (long side) Width: Length: Nominal
27 BID #CN Page of REVISION # 7 April 007 Bottom Angle: 5 degrees with a nose radius of /6 minimum.. TUNGSTEN CARBIDE INSERTS (Continued):.4 A metallurgic evaluation of the carbide insert shall show no evidence of cross grade contamination. 3. BRAZING: 3. The braze shall have a shear strength of no less that 30,000 psi. 3. The tungsten carbide inserts shall be positioned in the milled groove at 0.00 between the inserts the entire length of each cutting edge sections. 3.3 The inserts shall be induction brazed on all sides consistent with sound brazing practice with no evidence of voids or use of shims. 3.4 Each blade section to contain one insert of one inch ( ) nominal length for each inch of blade section length. Reference SPECIFIC REQUIREMENTS: 4. The difference between the highest and the lowest tip point not to exceed /3 on any given blade assembly. 4. The finished blade section shall be free of warpage and longitudinal deviation not to exceed /8 in a four foot (4 ) blade section. 4.3 Each blade section shall be identified with the manufacturer s identification stamp on each end of the section. 4.4 The finished blade sections shall be given one () coat of rust resistant paint and with markings showing the front edge of the blade to avoid improper mounting; however, the field portion ( ) of the blade surrounding the carbide insert is not to be painted to facilitate inspection.
28 in. in. in..875 in..35 in..875 in in. 48 in. TO FIT.65 in. PLOW BOLTS 5 in in..375 in in. in. 5 DEG..5 in. 36 in. EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE (FOR PURPOSE OF RECALL). REVISIONS N0. DATE BY //96 SWW 05/3/98 DLW 03/9/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION CARBIDE, 5 in. GRADER BLADES SCALE MATERIAL DLW N / A DRAWN BY CHK'D WHM DATE 05 / 3 / in. Radius MINIMUM DRW NO. SHEET EQN- OF
29 .50 in..5 in..875 in. DIA. TYPICAL PLACES.679 in. A A U DATE-4-A in. DIAMETER 6 in..5 in. SECTION A-A.5 in. BOLT HOLE DETAIL B B VIEW B-B in..87 in. MATERIAL SHALL BE: KENNAMETAL CASTING OR PLATTALOY MATERIAL-ANY ALTERNATIVE MATERIALS REQUIRE PRIOR TO BID APPROVAL. REVISIONS N0. DATE BY /03/94 SM 0//96 0/08/98 SWW DLW 05/6/0 DWG COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION ROUND SNOW SHOE DRAWN BY CHK'D DLW WHM SCALE DATE N/A 0 / 08 / 98 MATERIAL EQN-3 DRW NO. SHEET OF
30 6 in..0 in. in. SPACERS (QTY: ) NOTE: SPACERS ARE.50 in. THICK 3.00 in in..5 in in..50 in..875 in. DIA. HOLES.50 in. in. R..065 in. DIA. DRILL IN LINE.75 in..75 in..50 in..75 in..50 in. 3.5 in..50 in in..50 in. REVISIONS N0. DATE BY /03/94 SM 0//96 0/08/98 SWW DLW 05/6/0 DWG COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION ROUND SNOW SHOE DRAWN BY CHK'D DLW WHM SCALE DATE N / A 0/08/98 MATERIAL DRW NO. SHEET STEEL EQN-3 OF
31
32
33 0 in. TWELVE.6875 in. SQUARE HOLES COUNTERSUNK TO FIT.65 in. DIAMETER PLOW BOLTS in. 5 in. 6 in..65 in. in. EACH APART CENTER TO CENTER NOTES:. ALL DIMENSIONS IN INCHES.. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND THE MANUFACTURER'S NAME. * STEEL SPECIFICATION REVISIONS N0. DATE BY SWW DLW DWG CJW 03/30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL CUTTING EDGES FOR SNOW PLOWS SCALE MATERIAL DLW N / A DATE DRW NO. WHM 0 / 06 / 96 EQN-6A SHEET OF 3 DRAWN BY CHK'D
34 5.75 in. 04 in. 8 in. 8 in. 8 in. 8 in. 8 in. 8 in..5 in. 8 in..65 in. 6 in..5 in. 4.5 in. 8 in. 8 in. 8 in. 8 in. 8 in. 3.5 in. in. NO. 575 THIRTEEN.6875 in. HOLES, COUNTERSUNK TO FIT.65 in. Dia. PLOW BOLTS NOTES:. ALL DIMENSIONS IN INCHES.. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND THE MANUFACTURER'S NAME. * STEEL SPECIFICATION REVISIONS N0. DATE BY SWW DLW DWG CJW 03/30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL CUTTING EDGES FOR SNOW PLOWS SCALE MATERIAL DLW N / A DATE DRW NO. WHM 05 / 3 / 98 EQN-6A SHEET OF 3 DRAWN BY CHK'D
35 53.75 in in..5 in..065 in..50 in..50 in..50 in..50 in..65 in. 8 in. 6 in. 4 in..50 in..50 in..50 in in..75 in. R.H. & L.H. READ TEN.6875 in. SQUARE HOLES, COUNTERSUNK TO FIT.65 in.. Diameter PLOW BOLTS NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND THE MANUFACTURER'S NAME. *STEEL SPECIFICATION REVISIONS N0. DATE BY SWW DLW DWG CJW 03/30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL CUTTING EDGES FOR SNOW PLOWS SCALE MATERIAL DLW N / A DATE DRW NO. WHM 05 / 3 / 98 EQN-6A SHEET 3 OF 3 DRAWN BY CHK'D
36 .50 in in in. in. in. in. in. in. 6 in. in. in. in. in. in in. / 34.8 cm. SQUARE HOLES COUNTERED TO FIT.65 in. Dia. PLOW BOLTS. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL BRINELL HARDNESS 50-35* in. OR.50 in. THICK STEEL AS SPECIFIED. * STEEL SPECIFICATION REVISIONS N0. DATE BY EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURER AND THE MANUFACTURER'S NAME 03/30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION CUTTING EDGE FOR SNOWPLOW DRAWN BY CHK'D DLW WHM SCALE DATE N / A 05 / 4 / 98 MATERIAL DRW NO. EQN-6C SHEET OF
37 .75 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 4.5 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. / 36 in. 48 in. 36 in. TWENTY FIVE.6875 in. SQUARE HOLES, COUNTERSUNK TO FIT.65 in. DIAMETER PLOW BOLTS (TYPICAL) 0 in. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* 3. TO BE COMPATIBLE WITH PA SNOW PLOWS. 4. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 5. THICKNESS.65 in. * STEEL SPECIFICATION BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND NAME OF THE MANUFACTURER. REVISIONS N0. DATE BY /30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL COVER BLADES FOR CARBIDE CUTTING EDGES DLW SCALE N / A MATERIAL WHM DATE 0/09/96 DRW NO. DRAWN BY CHK'D EQN-6D SHEET OF
38 COMMODITY CODE in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in.. 6 in. 6 in. 4.5 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 48 in. 36 in. TWENTY SEVEN.6875 in. SQUARE HOLES, COUNTERSUNK TO FIT.65 in. Dia. PLOW BOLTS (TYPICAL) 48 in. 3 in. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* 3. TO BE COMPATIBLE WITH PA SNOW PLOWS. 4. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 5. THICKNESS.65 in. * STEEL SPECIFICATION BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND NAME OF THE MANUFACTURER. REVISIONS N0. DATE BY /30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL COVER BLADES FOR CARBIDE CUTTING EDGES DLW SCALE N / A MATERIAL WHM DATE 0/09/96 DRW NO. DRAWN BY CHK'D EQN-6D SHEET OF
39 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 4 in. 6 in. 6 in. 6 in. 6 in.. 6 in. 6 in. 6 in. 6 in. 36 in. 48 in. 36 in. CENTERLINE.6875 in. SQUARE COUNTERSUNK HOLES TO FIT.65 in. DIAMETER PLOW BOLTS (TYPICAL) 0 in. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURER AND THE MANUFACTURER'S NAME. * STEEL SPECIFICATION REVISIONS N0. DATE BY /30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL COVER BLADES FOR CARBIDE CUTTING EDGES SCALE MATERIAL DLW N / A DATE DRW NO. WHM 05 / 6 / 98 EQN-6E SHEET OF 3 DRAWN BY CHK'D
40 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 4 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. / 48 in. 36 in. CENTERLINE.6875 in. SQUARE COUNTERSUNK HOLES TO FIT.65 in. Dia. PLOW BOLTS (TYPICAL) 48 in. 3 in. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SHALL BE PUNCHED WITH THE DATE OF MANUFACTURER AND THE MANUFACTURER'S NAME. * STEEL SPECIFICATION REVISIONS N0. DATE BY /30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D STEEL COVER BLADES FOR CARBIDE CUTTING EDGES DLW SCALE N / A MATERIAL WHM DATE 05 / 6 / 98 DRW NO. EQN-6E SHEET OF 3
41 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in.. 6 in. 4 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 48 in. CENTERLINE.6875 in. SQUARE COUNTERSUNK HOLES TO FIT.65 in. Dia. PLOW BOLTS (TYPICAL) 48 in. 44 in. 48 in. NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* EACH BLADE SHALL BE PUNCHED WITH THE DATE OF MANUFACTURER AND THE MANUFACTURER'S NAME. * STEEL SPECIFICATION REVISIONS N0. DATE BY /30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL COVER BLADES FOR CARBIDE CUTTING EDGES DLW SCALE N / A MATERIAL WHM DATE 05 / 6 / 98 DRW NO. DRAWN BY CHK'D EQN-6E SHEET 3 OF 3
42 NOTE:.65 in. CUTTING EDGE WIDTH 4 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 4 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. 6 in. CENTERLINE.6875 in. SQUARE COUNTERSUNK HOLES TO FIT.65 in. ia. PLOW BOLTS (TYPICAL) 44 in. NOTES:. ALL DIMENSIONS IN INCHES.. MATERIAL: CARBON STEEL AISI BRINELL HARDNESS 50-35* 3. TO BE COMPATIBLE WITH PennDOT SNOW PLOWS TYPE THICKNESS.65 in. 5. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. * STEEL SPECIFICATION REVISIONS N0. DATE BY EACH BLADE SECTION SHALL BE PUNCHED WITH THE DATE OF MANUFACTURE AND MANUFACTURER'S NAME. 03/30/07 CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL COVER BLADES FOR CARBIDE CUTTING EDGES DLW SCALE N / A MATERIAL WHM DATE 05 / 6 / 98 DRW NO. DRAWN BY CHK'D EQN-6F SHEET OF
43
44
45 -/4" -/4" NOTE:. ALL DIMENSIONS IN INCHES/cm.. MATERIAL: AISI 090 GAME STEEL. 3. COMMODITY CODE TO BE COMPATIBLE WITH Pa DOT SNOW PLOW TYPE ORDER TO BE COMPLETED ONLY AFTER ACCEPTABLE OF PILOT MODEL. /" /".00 7-/" " " " -5/6" 3-/".500 -/4" " 5/6" " 5/6".85 5" REVISIONS N0. DATE BY /08/97 SGT 03//96 07/7/98 05/4/0 SWW DJA DWG COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION STEEL MOLDBOARD SHOE FOR SNOW PLOW TYPE 73 DRAWN BY CHK'D DJA WHM SCALE DATE N / A 07/7/98 MATERIAL DRW NO. EQN-47E SHEET OF
46 -9/0" 5" " 7-3/4" " HOLD 3-/4" 7/64" DRILL -/" 3" -8/5" DRILL & LINE REAM 3/8" x 45 WELD CHAMFER -/4" /" ASSEMBLY HEAT TREAT RC MARK REQD. MTL.A36 STEEL /" R. " /" 45 8-/4" 9-3/4" " Dia MARK -REQD MTL. C-045 STEEL REVISIONS N0. DATE BY //83 03/06/96 07/3/98 05/3/0 VA SWW DJA DWG COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D SNOW PLOW, CLEVIS PIN SWW WHM SCALE DATE N / A 03/06/96 MATERIAL DRW NO. EQN-4 SHEET OF
47
48
49 3 4-5/8" -/6" Sq. PUNCH " 5/8" 3/4" 3" R. /6" MARK 3-3/8" THICK " 6" 3-5/6" -/6" 3" -7/6" 6-/" -/" 7-3/4" 4" NOTES:. ALL DIMENSIONS IN INCHES.. MATERIAL: C-090 STEEL. 3. STRESS RELIEVE AFTER WELDING. REVISIONS N0. DATE BY /4" 08/30/76 VAA 0/6/8 03/05/96 05/4/0 06/7/05 -/4" 6-/" -7/8" 9-5/8" MARK 4-3/8" THICK NOSEPIECE - 7 PLOW COMMODITY CODE VAA SWW DWG KNH COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D 3-7/6" SCALE DATE N/A /6/8 7/6" NOSEPIECE FOR 7 SNOWPLOW MATERIAL DRW NO. EQN - 48 SHEET OF
50 5" -9/0" " " HOLD 3-/4" 7-3/4" 7/64" DRILL -/" 3" -8/5" DRILL & LINE REAM -/4" /" /" R. CLEVIS PIN SHALL BE MOLDED OF 304 STAINLESS STEEL REVISIONS N0. DATE BY /0/00 GAH 05/3/0 DWG COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D SNOW PLOW, CLEVIS PIN LHA RAR SCALE DATE N / A 0/9/00 MATERIAL DRW NO. EQN-4A SHEET OF
51 3/4" INCLINED AT /4" THICK,AISI 00 -/8" 3" 7/8" R /8" -5/8" " -/8" Dia., 3/4" / Sq. TYP. -3/8" 3/4" Sq. TYP. -3/8" 7-3/4" /" R. -/" R. -/" 3-5/8" ". THICK, AISI 090 NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI 090 AND AISI 00 AS SHOWN. 3. TO BE COMPATIBLE WITH PaDOT SNOW PLOWS. 4. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 5. TO BE SUPPLIED WELDED IN ONE PIECE. 6. WELDING AS PER A.W.S. REVISIONS N0. DATE BY /4/96 SWW CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D NOSE PIECE FOR TYPE 7 & 7 SNOW PLOWS DJA WHM SCALE DATE N/A MATERIAL DRW NO EQN - 48G SHEET OF
52 NOTES:. ALL DIMENSIONS IN INCHES/cm.. MATERIAL: C-090 STEEL 3. STRESS RELIEVE AFTER WELDING. -3/4" -/6" Sq. PUNCH 5-3/4" 3" -/" -/8" /" " MARK /" THICK /" 3-3/6" R. 8-3/4" 3/8" -/6" Sq. PUNCH 5-3/6" " 4" 3/4" R. 3" 3" -5/8" -7/8" 3" / 7.6cm. -5/8" MARK - 3/4" THICK -/4" 0-3/6" /6" R. NOSEPIECE FOR 7 OR 73 SNOWPLOW COMMODITY CODE OR COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION REVISIONS N0. DATE BY NOSEPIECE FOR 7 OR 73 SNOWPLOW 08/30/76 VAA VAA 0/6/8 MATERIAL N/A SCALE DJA WHM DRAWN BY SWW 03/05/ /8/98 EQN - 48 DRW NO. DATE CHK'D DWG 05/4/0 4 SHEET OF 5
53 WELD 56 DEG. MATERIAL :.0 in. TO.50 in. CARBON STEEL REVISIONS N0. DATE BY CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D DLW WHM NOSE PIECE SCALE DATE N / A 05 / / 98 MATERIAL DRW NO. EQN-48E SHEET OF
54 .75 in..875 in. Radius.5 in. in.. in. Dia. HOLE in.. Radius HOLE.85 in. Radius in in..75 in in in. 9 in in. SQUARE HOLE 0.85 in in. 4 in in..50 in. 8 in. REVISIONS N0. DATE BY CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D DLW WHM NOSE PIECE SCALE DATE N / A 05 / / 98 MATERIAL DRW NO. EQN-48E SHEET OF
55 3/4" INCLINED AT 65 0 /8" Dia., 3/4" /Sq. TYP. 3/4"R VERTICAL -3/8" -3/4" " -/4" -/4" 3/4". " -3/8" DIA 3/4" " -/" R. -5/8" 3-/". 3/4" THICK, AISI /4" NOTES:. ALL DIMENSIONS IN INCHES. MATERIAL: CARBON STEEL AISI 090 AND AISI 00 AS SHOWN. 3. TO BE COMPATIBLE WITH PaDOT SNOW PLOWS. 4. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 5. TO BE SUPPLIED WELDED IN ONE PIECE. 6 WELDING AS PER A.W.S. " " R. -5/8" " THICK, AISI 090 REVISIONS N0. DATE BY /4/96 SWW CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D NOSE PIECE FOR TYPE 7B & 73 SNOW PLOWS DJA WHM SCALE DATE N/A MATERIAL DRW NO EQN - 48H SHEET OF
56 NOTES: /4". MATERIAL: CARBON STEEL AISI TO BE COMPATIABLE WITH PaDOT SNOW PLOWS. 3. ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 4. MARK AND MARK PLATES TO BE SHIPPED AS SEPERATE ITEMS - NO WELDING. 5. VALID FOR DISTRICT -0 ONLY MARK -7/8" THICK 8-3/4" 3-3/6" R. MARK -3/4" /.9cm. THICK 3/4" R. 5-3/6" COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION REVISIONS N0. DATE BY MATERIAL N/A SCALE DJA WHM DRAWN BY EQN - 48I DRW NO. DATE CHK'D 4 SHEET OF 5 6" 3" -5/8" -/4" 3-/6 R. 0-3/6" -7/8" NOSEPIECE FOR 7 & 73 SNOWPLOWS 3/4/96 SWW 05/4/0 DWG
57 -/" 3"/ 6" 3" 3" 3/4" (MIN.) /6" SQUARE HOLES BEND LINE 4-/" 3-/" 6" SEE DETAIL A & B A 3/8" C B 5/8" REVISIONS N0. DATE BY //9 WHM //96 SWW CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D CURB BUMPERS - LEFT AND RIGHT FOR SNOW PLOW TYYPE 73 DJA WHM SCALE DATE N/A MATERIAL DRW NO EQN - 49 SHEET OF
58 TOP VIEW - LEFT SIDE -3/4" R. 4-3/4" DRAWING ON PAGE OF EQN AND ABOVE REPRESENT THE LEFT SIDE. FOR RIGHT SIDE REVERSE ALL DIMENSIONS. R - BEND LEFT - BEND NOTES: A. DESIGN SHALL INCORPORATE A /4" x -/" CARBON STEEL FLAT STOCK RUNNING THE FULL LENGTH OF THE FRONT OF THE CUTTING EDGE. IT SHALL BE WELDED TO TOP FRONT SURFACE OF GUARD WITH /4" CONTINUOUS FILLET WELD AND COM- PLETELY FUSED TO WELD OVERLAY. CHROME CARBIDE WELD DEPOSIT ENTIRE WIDTH AND A MINIMUM OF 5/8" THICK. B. ALTERNATIVE DESIGN, TUNGSTEN CARBIDE INSERTS, CENTERED IN THE BLADE EDGE. C. REGARDLESS IF CHROME CARBIDE WELD OR TUNGSTEN CARBIDE IS USED, IT SHALL HAVE A MINIMUM ROCKWELL "A" HARDNESS OF. TUNGSTEN BRAZING MATERIAL SHEAR STRENGTH SHALL BE 30,000 p.s.i. / 06844KPa MIN. NOTES:. ALL DIMENSIONS IN INCHES / cm.. MATERIAL AISI 060 GRADE STEEL, MINIMUM. 3. TO BE COMPATIABLE WITH PaDOT SNOW PLOWS TYPE 7 SERIES AND ORDER TO BE COMPLETED ONLY AFTER ACCEPTANCE OF PILOT MODEL. 5. ANY FURTHER ALTERNATIVE DESIGNS NEED WRITTEN APPROVAL BY CHIEF EQUIPMENT DIVISON. REVISIONS N0. DATE BY //9 WHM /3/96 SWW CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D CURB BUMPERS - LEFT AND RIGHT FOR SNOW PLOW TYPE 73. DJA WHM SCALE DATE N/A MATERIAL DRW NO EQN - 49 SHEET OF
59 6 -/ -/ 3 3 -/ 7/8 dia. typ. R. -/6 dia. drill in line 3/4 -/ 3/4 / 3 -/ 3/4 3-/6-7/8 3-/6 9 -/ 3/8 NOTES:. ALL dimensions in inches.. Material - steel ASTM A ALL welded construction. 4. Refer drawing NO. EQN 6 MK6. 5. Part NO. PA 699A. REVISIONS N0. DATE BY CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D SNOW PLOW SHOE BRACKET DLW WHM SCALE DATE N / A 07 / 3 / 98 MATERIAL DRW NO. SHEET EQN-6B OF
60 typ. 6 developed length slot slot slot Body Materials c-00 steel carbide insert specifications width.500 +/-.005 inches height.375 +/-.00 inches *Length inch Nominal Cobalt.5 to 3% to 4.4 hardness Rockwell 'A' 87 to 88.5 Transverse rupture 350,000 P.S.I Min..375 Certification required with bid.065 R. typical Weld 3 sides as indicated..5 *Note: Special insert needed to obtain overall carbide. Length shall have a minimum.75 inch length and a maximum.5 length. -All dimensions in inches square punch /-.5 insert length Note: end inserts tapered to fit shoe -Braze carbide inserts flush Dia. +/-.005 REVISIONS N0. DATE BY //93 SM CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D Valk V-40-0W Snowplow Carbide Wear Shoe Sole DJA WHM SCALE DATE N / A 08 / 4 / 98 MATERIAL DRW NO. EQN-058 SHEET OF
61 / 6 / Tk. Gussets / /4 /6 x Slots 3/8 4 /4 / / 5/8 Weld Both Sides 9 Angled Insert On End 7 3 / Slot Depth Carbide Inserts Bottom View. Hidden Items Not Shown Mill Slots & Braze Inserts Flush Slot Width 6 3/4 Carbide Length Insert Carbide Specifications Width.500 +/-.005 Height.375 +/-.00 Lenght In. Nominal* Cobalt.5 to 3% Sp. Gravity 4. to 4.4 Rockwell "A" Hardness 87 to 80.5 Transverse Rupture Strength 350,000 PSI Min. Certification Required With Bid Main Body Material C-00 Steel *NOTE: Special insert needed to obtain proper overall carbide length. Shall have minimum 3/4 inch length and a maximum -3/4 inch length. -All dimensions in inches. REVISIONS N0. DATE BY /7/93 6//94 SM GL 09/6/98 DJA COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D CARBIDE MOLD BOARD SHOE DJA WHM SCALE DATE N / A 09 / 6 / 98 MATERIAL DRW NO. EQN-059 SHEET OF
62 7 in. 84 in. / 7.6 cm. / 7.6 cm. / 7.6 cm..688 in. X.78 in. PUNCH.56 in.. X 8 DEG.CSK. COUNTERSUNK OPTIONAL 3 HOLES FOR 6 ft. BLADE 5 HOLES FOR 7 ft. BLADE / 7.6 cm. A B 7 in. BLADE: A 60 in. 9 HOLES EQUALLY SPACED ON 6 in. CENTERS 84 in. BLADE: B 7 in. 7 HOLES EQUALLY SPACED ON 6 in. CENTERS REVISIONS N0. DATE BY CJW COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION 6 ft. / 8.88 cm. + 7 ft. / 3.36 cm. X 8 in. / 0.3 cm. GRADER BLADES FOR JOHN DEER GRADERS MODELS DRAWN BY CHK'D DLW WHM SCALE DATE N / A 05 / 8 / 98 MATERIAL DRW NO. EQN-078 SHEET OF 3
63 4 in. 8 DEG..5 in in. RADIUS +/-.5 in. CENTER LINE 8 in..75 in. 4 in..0 in..35 in. REVISIONS N0. DATE BY COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF TRANSPORTATION DRAWN BY CHK'D 6 ft. + 7 ft. X 8 in. GRADER BLADES FOR JOHN DEER GRADERS BLADES MODELS DLW WHM SCALE DATE N / A 05 / 8 / 98 MATERIAL DRW NO. EQN-078 OF 3 SHEET
Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION This contract covers the needs for the lab testing of coal used by Commonwealth facilities.
More informationOverview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety. CONTRACT DESCRIPTION Materials must conform to PennDOT specifications. The provisions of Act 226-1968,
More informationSodium Chloride - Overview
Sodium Chloride - Overview MARKET DESCRIPTION CHEMICAL COMPOSITION: SHALL BE NOT LESS THAN 95% SODIUM CHLORIDE. PERCENT OF SODIUM CHLORIDE SHALL BE DETERMINED IN ACCORDANACE WITH CURRENT ASTM-D-362. MOISTURE
More informationOverview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION Contract is used to provide elliptical and round cement concrete pipe and their respective
More informationCovers Commonwealth requirements for highway inlet boxes, grates and frames.
Highway Inlet Boxes, Grates, and Frames (5680-02) Contract - Overview Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION Covers Commonwealth requirements for
More informationCHANGE. Purchasing Agent: Name: John Jones Phone: Fax: Valid from/to: 09/01/ /31/2017. Please Deliver To:
Page 1 of 16 Contract Change Approval Date: 09/01/2016 All using Agencies of the Commonwealth, Participating Political Subdivision, Authorities, Private Colleges and Universities Your SAP Vendor Number
More information3519 State Rte Corning Road. South New Berlin, Elmira, NY NY p p
WINTER CATALOG SUPERIOR QUALITY. HEADQUARTERS PO Box 527 PENNSYLVANIA OSWEGO TOOL AND STEEL S. NEW BERLIN 3519 State Rte. 8 2420 Corning Road 102 Creek Road 5183 State Rte.104 South New Berlin, Elmira,
More informationSnow Removal & Road Maintenance Products
Snow Removal & Road Maintenance Products Introducing Kennametal I.C.E.-Series Isolated Carbide-Edged s engineered specifically to last exceptionally long in even the most challenging road conditions! I.C.E.
More informationWausau WW2452. R.H. snow plow, Make & Model. Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20"
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Wausau WW2452 Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20" Plowing angle 45-55-60 Degree
More informationTHREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
More informationSK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationUniversal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More information6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW
Price quote for: 6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationTOTAL PRICE: See Schedule 6.0-1
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Falls One way Plows Nose height 30 Discharge height 60 Plow throat depth from vertical to deepest point 24 Plowing angle 33 Moldboard
More informationMOTOR GRADER & SNOW PLOW B LADES
MICHAEL TODD & COMPANY, INC. MOTOR GRADER BLADES Michael Todd & Co., Inc. offers a full line of cutting edges for motor graders. Part No. Size Hole Spacing Bolts Required 58X6X5 5 8 x 6 x 5ft 12 7 MOTOR
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationPurchase of Two (2) Snow Plows and Two (2) Plow Sub-frames.
INVITATION TO BID Notice is hereby given that sealed bids will be received at the City Clerk's Office, City Hall, 435 Ryman Street, Missoula, MT 59802 until 2:00 p.m., Tuesday, June 25 th, 2013 and will
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationREQUEST FOR PROPOSALS
REQUEST FOR PROPOSALS 10782 Wattsburg Road Erie, PA 16509 The WATTSBURG AREA SCHOOL DISTRICT invites qualified vendors to submit proposals for CONTRACTED SNOW REMOVAL MANDATORY PRE-SUBMISSION MEETING All
More informationProtective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
Technical Services: Tel: (66) 500-76 / Fax: (01) 71-7317 www.grinnell.com Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an
More informationA.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual
70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER
More informationASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationSNOW REMOVAL - REQUEST FOR PROPOSAL. Snow Removal/Clearing and Sanding/Salting for Winter Fundy Ocean Research Center for Energy
Fundy Ocean Research Center for Energy SNOW REMOVAL - REQUEST FOR PROPOSAL Snow Removal/Clearing and Sanding/Salting for Winter 2016-17 Sites 1. FORCE Sub-Station Driveway (portion of Old Black Rock Road),
More informationOverview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
Overview for Contract 6750-03 Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION This contract provides film, photographic chemicals and paper. CONTRACT INFO
More informationATV WP2 FRONT MOUNT PUSH TUBE
ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle
More informationPrime6400 Software. Furnish and Install: Architectural Metalwork. SS Counter Tops Metal Brackets Metal Tops Metal Wall Panels
To: Prime Estimating & Software Services, LLC 4248 Kensington High Street Naples, Florida, U.S.A. 3405 Att: Doug Baxter Phone: (239) 213-1237 Fax: (239) 213-1237 Project: Mock Metalwork Project Address:
More informationLDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
LDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationStainless Steel Sanitary Products. 3A & BPE Industry Standard Designs Without Brand Name Price. More For Less
Stainless Steel Sanitary Products 3A & BPE Industry Standard Designs Without Brand Name Price More For Less Material Inspection Certification EN 10204 3.1 Positive Material Identification ( PMI ) X-Ray
More informationRapid City Police Dept. - SD 4/25/2018 Q SS 1. Axon Sales Representative Stefan Schurman.
Rapid City Police Dept. - SD 4/25/2018 1 Axon Sales Representative Stefan Schurman sschurman@axon.com QUOTE: Issue Date: 04/25/2018 Axon Enterprise, Inc. Protect Life. 17800 N 85th St. Scottsdale, Arizona,
More informationCRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New Brunswick CANADA E7P 2K5
SNOWPLOW 0600 0600 Series Hydraulic Reversible Snowplow owner s manual. Read before operating. Important safety and operation instructions inside. CRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New
More information1073 Series One Way Snowplow owner s manual. Read before operating. Important safety and operation instructions inside.
1073 ONE WAY 1073 Series One Way Snowplow owner s manual. Read before operating. Important safety and operation instructions inside. CRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New Brunswick CANADA
More informationAM01 - System Offices. Purchase Order
Page 1 of 6 AM01 - System Offices Purchase Order P.O. Date: 12/16/2016 Purchase Order Number AM01-17-P041212 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D O R Vendor Number: 00001945
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationFor Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
More informationSchedule C By-Law Snow and Ice Control Services - Project Specifications for Various Parking Lots
SNOW AND ICE CONTROL SERVICES - (4) SEPARATE DEPARTMENTS SCHEDULE C REQUEST FOR PROPOSAL 2244 Schedule C By-Law Snow and Ice Control Services - Project Specifications for Various Parking Lots 1.0 General
More informationAcknowledgment of Aramco Asia. Supplier Code of Conduct
Acknowledgment of Aramco Asia Supplier Code of Conduct (Applicable to Vendors, Manufacturers, and Contractors) Aramco Asia is committed to the highest ethical and legal standards in the conduct of its
More informationREQUEST FOR PROPOSALS
West Q Avenue, Kalamazoo, MI P: () - F: () - www.texastownship.org REQUEST FOR PROPOSALS - Winter Snow Removal Services Proposals The Charter Township of Texas, Kalamazoo County Michigan, is requesting
More informationOWNER S MANUAL. Daniels Wing Plow. Operating Instructions Illustrated Parts List
OWNER S MANUAL Daniels Wing Plow Operating Instructions Illustrated Parts List 1 Congratulations! By purchasing this Daniels Wing Plow, you can now benefit by owning the latest in state-of-the-art snow
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More informationINVITATION TO BID. Martha L. Rehbein City Clerk. Publish: March 15 th, 2015 March 22 nd, 2015
INVITATION TO BID Notice is hereby given that sealed bids will be received at the City Clerk's Office, City Hall, 435 Ryman Street, Missoula, MT 59802-4297 until 3:00 p.m., Monday, March 30 th, 2015 and
More informationAM02 - Texas A&M University. Purchase Order
Page 1 of 8 AM02 - Texas A&M University Purchase Order P.O. Date: 8/23/2016 Purchase Order Number AM02-17-P029331 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D O R Vendor Number:
More informationSeries 3000 and XE-Series Engineering Data
Series 3000 and XE-Series Engineering Data A C A U S T R A L I A Series 3000 and XE-Series Engineering Data The NEW era of Series 3000 and XE-Series Cooling Towers continue to exceed the industry standard
More informationProject PAJ2 Dynamic Performance of Adhesively Bonded Joints. Report No. 3 August Proposed Draft for the Revision of ISO
NPL Report CMMT(A)81 Project PAJ2 Dynamic Performance of Adhesively Bonded Joints Report No. 3 August 1997 Proposed Draft for the Revision of ISO 11003-2 Adhesives - Determination of Shear Behaviour of
More informationType M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More informationconfront fury
confront WINTER S fury WITH A COTECH SNOW PLOW www.cotech.ca table of content mission...2 Snow Removal Equipment...4 Snow plows with a trip system... 4 Extendable Reversible Snow Plows... 6 Inverted Snow
More informationAM02 - Texas A&M University. Purchase Order
Page 1 of 13 AM02 - Texas A&M University Purchase Order P.O. Date: 12/20/2016 Purchase Order Number AM02-17-P041529 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D O R Vendor Number:
More informationPOWER PUSHER Snowplow
May 15, 2013 Lit. No. 43682, Rev. 00 POWER PUSHER Snowplow 8' 72040; 10' 72045; Box Plow for Skid-Steer Loaders Owner's Manual and Installation Instructions Original Instructions CAUTION Read this manual
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More information@Copyright 2016 SKAPS Industries.
SKAPS INDUSTRIES 571 Industrial Pkwy, Commerce, GA 30529 Phone: (706) 336 7000 Fax: (706) 336 7007 E Mail: contact@skaps.com SKAPS GEOCOMPOSITE DROP IN SPECIFICATIONS @Copyright 2016 SKAPS Industries www.skaps.com
More informationAM02 - Texas A&M University. Purchase Order
Page 1 of 9 AM02 - Texas A&M University Purchase Order P.O. Date: 2/23/2016 Purchase Order Number AM02-16-P014556 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D O R Vendor Number:
More informationRFP # Attachment 5 Revised Proposal Evaluation Form Attachment 5 PROPOSAL EVALUATION FORM All proposals will be reviewed for responsiven
RFP #2016-2000-3362 Attachment 5 Revised Proposal Evaluation Form Attachment 5 PROPOSAL EVALUATION FORM All proposals will be reviewed for responsiveness and then evaluated using the criteria set out herein.
More information50 Gordon Drive, Rockland, Maine sherplows.com. STORM BOXX Snowplow. 10' and 12' Box Plow for Backhoe Loaders
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 83180, 83185 May 15, 2013 Lit. No. 43687, Rev. 00 STORM BOXX Snowplow 10' and 12' Box Plow for Backhoe Loaders Owner's
More information2.4M SERIES 1241 ANTENNA
4096-859 Revision D April 19, 2016 2.4M SERIES 1241 ANTENNA General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com General Dynamics Page 1 4/19/2016
More informationService Information Letter SIL # 017
Service Information Letter SIL # 017 Trunnion Adjustment - Double Barrels Only Equipment: Double Barrels With Sloped Trunnions Date Issued: 9-24-03 Additional Reference: SIL # 016 Revised: Revision #:
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationCommercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
More informationAM02 - Texas A&M University. Purchase Order
Page 1 of 8 AM02 - Texas A&M University Purchase Order P.O. Date: 12/19/2016 Purchase Order Number AM02-17-P041414 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D O R Vendor Number:
More informationETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6712/ARL-SA6713 Revision 0 ARL
ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT -SA6712/-SA6713 Revision 0 Subject: Sound Absorption Test Date: 17 May 2016 Contents: on Sound Absorption Data, One-third Octave bands
More informationAM01 - System Offices. Purchase Order
Page 1 of 5 AM01 - System ffices Purchase rder P.. Date: 10/5/2016 Purchase rder Number AM01-17-P034061 SHW THIS NUMBER N ALL PACKAGES, INVICES AND SHIPPING PAPERS. V E N D R Vendor Number: 00000842 FACILITY
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationREQUEST FOR QUOTATION (RFQ) FOR PROCUREMENT OF THERMO HYGROMETER -UNDP GLOBAL FUND
SUDAN REQUEST FOR QUOTATION (RFQ) FOR PROCUREMENT OF THERMO HYGROMETER -UNDP GLOBAL FUND Date: August 8 th 2010 REFERENCE:RFQ/KRT/GF/10/049 Dear Sir / Madam: You are kindly requested to submit your quotation
More informationAM23 - Texas A&M University Health Science Purchase Order
Page 1 of 7 AM23 - Texas A&M University Health Science Purchase Order P.O. Date: 9/22/2016 Purchase Order Number AM23-17-P033061 SHOW THIS NUMBER ON ALL PACKAGES, INVOICES AND SHIPPING PAPERS. V E N D
More informationEdward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608
Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the
More informationStandard Test Methods for Glass-Bonded Mica Used as Electrical Insulation 1
Designation: D 1039 94 (Reapproved 1999) e1 An American National Standard Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation 1 This standard is issued under the fixed designation
More informationALUMINUM STRUCTURAL PLATE HEADWALLS AASHTO LRFD BASIS OF DESIGN
ALUMINUM STRUCTURAL PLATE EADWALLS AASTO LRFD BASIS OF DESIGN LANE ENTERPRISES, INC. www.lane-enterprises.com Required Backfill and Load Cases: ALUMINUM STRUCTURAL PLATE EADWALLS BASIS OF DESIGN Backfill
More informationFlammable/Combustible Liquid Storage
8.12.1 RESPONSIBILITY University personnel are responsible for using approved and safe methods for storing flammable/combustible liquids. Personnel must store flammable and combustible liquids in accordance
More informationINSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR
1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationOverview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety.
Overview for Contract Prior to utilizing a contract, the user should read the contract in it's entirety. DESCRIPTION Covers Commonwealth requirements for Truck Mixed Cement/Concrete. s must conform and
More informationproduct manual H-4204 Proving Ring Penetrometer
05.09 product manual H-4204 Proving Ring Penetrometer nnmm Handle Proving Ring Extension Rod Coupler Penetration Rod Cone Figure #1 General Information The Proving Ring Penetrometer is a cone type of penetrometer
More informationFor sunshades using the Zee blades wind loads are reduced by 10 psf.
C.R. Laurence Co., Inc. 2503 East Vernon Los Angeles, CA 90058 24 July 2009 SUBJ: CR LAURENCE UNIVERSAL SUN SHADES The CRL Universal Aluminum Sun Shades were evaluated in accordance with the 2006 International
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationFORK-MOUNTED SNOW PLOW, MODEL SPB-N-72 INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More information2018 North Carolina Residential Code Prescriptive Tables for Selection of Support Elements for Beams, Girders, and Headers: Example Problems
2018 North Carolina Residential Code Prescriptive Tables for Selection of Support Elements for Beams, Girders, and Structural Building Components Association (SBCA) August 10, 2018 SBCA is an APPROVED
More informationState GIS Officer/GIS Data
State GIS Officer/GIS Data This Act creates the position of state Geographic Information Systems (GIS) officer. The Act: requires the state GIS officer to adopt or veto the GIS data standards and a statewide
More informationDRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6266/ARL-SA6274 Revision 0 ARL
ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT -SA6266/-SA6274 Revision 0 Subject: Sound Absorption Test Date: 17 February 2015 Contents: on Sound Absorption Data, One-third Octave
More informationMILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, DECODERS MONOLITHIC SILICON. Inactive for new design after 7 September 1995.
INCH-POUND 16 February 2005 SUPERSEDING MIL-M-38510/10C 3 March 1986 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, DECODERS MONOLITHIC SILICON This specification is approved for use by all
More informationBid Specifications Release Date: October 18, 2017 DESCRIPTION: Snow Plow Services
Bid Specifications Release Date: October 18, 2017 DESCRIPTION: Snow Plow Services JOB SITES: GreenTrees of Huntley 11417 E. Main Street Huntley, IL 60142 SilverTrees Apartments 5901 Milwaukee Street Richmond,
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationNordic Plow. Zero Turn 49 Blade Plow DANSK...18 ENGLISH...11 NORSK FRANCAIS...12 SVENSKA...20 PORTUGUES...16 XXXXXX...
Zero Turn 49 Blade Plow by Nordic Plow... 3 DANSK...18 ENGLISH...11 NORSK... 19 FRANCAIS...12 SVENSKA...20 ITALINO... 13 NEDERLANDS... 14 ESPANOL... 15 POLSKI...21 CESTINA...22 MAGYAR...23 PORTUGUES...16
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600917 EFFECTIVE: SEPTEMEBER 15, 2017 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1/8" 3/4" 2.88 3.50
More informationMICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC SILICON. Inactive for new design after 7 September 1995
MILITARY SPECIFICATION INCH-POUND MIL-M-38510/2G 8 February 2005 SUPERSEDING MIL-M-38510/2E 24 December 1974 MIL-M-0038510/2F (USAF) 24 OCTOBER 1975 MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationDesignation: D (Reapproved 2009)
Designation: D3702 94 (Reapproved 2009) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self- Lubricated Rubbing Contact Using a Thrust Washer Testing Machine 1 This standard
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/77F 2 August 2018 SUPERSEDING MIL-PRF-22885/77E 25 April 2013 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSH BUTTON, ILLUMINATED, 4-LAMP, 0.75 SQUARE, 7.5 AMPERES, AND LOW LEVEL
More informationGalileo Telescope Solar Viewer Joseph Hora, Elizabeth Hora 2017/09/18
Galileo Telescope Solar Viewer Joseph Hora, Elizabeth Hora 2017/09/18 17 7.75 5 2 1.5 3 2 1.5 Materials: (all dimensions in inches) 3x plywood sheet 17 x 7.75 x ½ 3x wood block cut from 2x4: 5 x 2 x 1.5
More informationSTATE OF NORTH CAROLINA D DEPARTMENT OF ADMINISTRATION February 1, 2013 PURCHASE AND CONTRACT DIVISION C March 8, 1995
STATE OF NORTH CAROLINA 6810-1D DEPARTMENT OF ADMINISTRATION February 1, 2013 PURCHASE AND CONTRACT DIVISION SUPERSEDING 6810-1C March 8, 1995 SPECIFICATION FOR CHEMICALS (This specification is released
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600718 EFFECTIVE: JULY 30, 2018 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1-1/2" 2" 2-1/2" 3" 3-1/2"
More informationIntroduction to Geohazard Standard Specification for Simple Drapery
Introduction to Geohazard Standard Specification for Simple Drapery Up to now, there is no standard specification for geohazard solutions in North America. Often projects specifications are referring to
More informationNo. Parts Qty Description Weight (lb) Cost. 4 Wheels (E) 4 Hard Rubber Tread 4 in. dia. $38.40
4 Bill Of Materials No. Parts Qt Description Weight (lb) Cost 1 Nose and back 1 0 x50 x0.16 sheet, 04-15.7 $41.75 plates (A & B) T361 Al. Axle Bracket 8 in. 04-T361 Al. Bar, 1 in. x 0.16 in. 0.7 $3.35
More information