Moments, Levers and Centre of Gravity
|
|
- Valentine Marsh
- 5 years ago
- Views:
Transcription
1 Second Year Science Moments, Levers and Centre of Gravity Ms Rochford
2 In this topic: Levers Moment of a force Centre of Gravity
3 Levers
4 Levers are everywhere!
5 Levers Lever: a rigid body that can rotate (pivot) around a fixed point Fulcrum: the fixed point when using a lever Examples of levers: Door handle Wheelbarrow Wrench
6 How a Lever Works Fulcrum fixed point around which the lever turns Load Effort The force (usually a weight) that you want to move Force applied by YOU EFFORT FULCRUM
7 How a lever works There are 3 terms associated with levers Force (or effort) Load Fulcrum
8
9 Where is the Fulcrum?
10 Moment
11 What happens when you try to open a door with one finger? Where do you push? Hi, my name is Mr Stick hinges
12 Do you push near the hinges? I can t do it!
13 Do you push far from the hinges? That s easier!
14 The turning effect of a force depends on two things: 1. The size of the force Obviously!
15 The turning effect of a force depends on two things: 2. The distance from the fulcrum (axis of rotation) Not quite so obvious! Fulcrum
16 Moment Moment: the turning effect of a force It is equal to the force multiplied by the perpendicular distance from the fulcrum
17
18 Moment Moment = Force x Perpendicular distance from fulcrum to line of action of the force Units: Newton metres (Nm)
19 Calculate the moment of the force in the diagram below Moment = Force x distance from fulcrum to line of force action Force = 7 N distance from fulcrum to force action = 0.8 m Moment of the force = 7 N x 0.8 m Moment of the force = 5.6 Nm
20 5N 1. What does this Force number Mean? 2. What is Fulcrum this? 3. Which direction will the Anti-clockwise see-saw turn?
21 5N Force Fulcrum Anti-clockwise
22 How can we increase the size of the moment (the turning effect)? Fulcrum Distance from force to fulcrum Force (effort)
23 10cm 5N 50 Ncm Fulcrum Calculate the moment (turning effect) of the force applied to the see-saw. Give the units.
24 5cm 5N 25 Ncm fulcrum Calculate the moment (turning effect) of the force applied to the see-saw. Give the units.
25 10cm 10N 100 Ncm fulcrum Calculate the moment (turning effect) of the force applied to the see-saw. Give the units.
26 Law of the Lever When a lever is balanced, the sum of the clockwise moments equals the sum of the anticlockwise moments
27 The girl on the left exerts an anti-clockwise moment The girl on the right exerts a clockwise moment When an object is balanced it is in equilibrium
28 10m 10m Left Moment Right Moment 100 Nm 100 Nm 10N 10N fulcrum The The moments see-saw of is the BALANCED. forces are But balanced. why?
29 10m 7m Left Moment Right Moment 100 Nm 70 Nm 10N 10N fulcrum But what happens if the blue dragon moves in a little?
30 10m 7m Left Moment Right Moment 100 Nm 70 Nm 10N 10N fulcrum The moment of force on the left is bigger
31 10m 10m Left Moment Right Moment 100 Nm 200 Nm 10N 20N fulcrum What happens if the blue dragon gets fatter?
32 10m 10m Left Moment Right Moment 100 Nm 200 Nm 10N 20N fulcrum The moment of the force is greater on the right
33 10m 10m Left Moment Right Moment 100 Nm 200 Nm 10N 20N fulcrum But can we balance them both again? How?
34 10m 5m Left Moment Right Moment 100 Nm 100 Nm 10N 20N fulcrum By reducing the distance from the fulcrum for the blue dragon
35 Centre of Gravity
36 Centre of Gravity Centre of Gravity: A point through which all of the weight of an object appears to act Or it can also be described as: The point from which an object balances
37 Centre of Gravity If a fulcrum is set up at the centre of gravity, it will balance A metre stick s centre of gravity is at 50 cm
38 Activity: To find the centre of gravity of a thin lamina Pin the lamina to the cork through 1 hole and hang the plumb line Mark out the line Repeat through other 2 holes
39 Activity: To find the centre of gravity of a thin lamina Centre of gravity = Where all 3 lines intersect
40 Equilibrium Remember: Equilibrium: when an object is balanced and still A metre stick hung at 50 cm (its centre of gravity) is in equilibrium
41 3 States of Equilibrium Stable Equilibrium The ball will return to the same position if given a slight push Unstable Equilibrium Neutral Equilibrium The ball will not return to the same position if given a slight push The ball will return to a similar position if given a slight push
42 Stability If objects are stable, they won t fall over easily If the object s weight acts from the centre of gravity, through its base, it is stable If the object s weight acts from the centre of gravity, outside its base, it is unstable and will fall
43 Stability To improve stability: 1. Use a wide base 2. Lower the centre of gravity
44 Chapter 35: Moments, Levers and Centre of Gravity DONE!!
Theme 2 - PHYSICS UNIT 2 Forces and Moments. A force is a push or a pull. This means that whenever we push or pull something, we are doing a force.
Forces A force is a push or a pull. This means that whenever we push or pull something, we are doing a force. Forces are measured in Newtons (N) after the great physicist Sir Isaac Newton. The instrument
More informationContents. Concept Map
Contents 1. General Notes on Forces 2. Effects of Forces on Motion 3. Effects of Forces on Shape 4. The Turning Effect of Forces 5. The Centre of Gravity and Stability Concept Map April 2000 Forces - 1
More informationLecture 8. Torque. and Equilibrium. Pre-reading: KJF 8.1 and 8.2
Lecture 8 Torque and Equilibrium Pre-reading: KJF 8.1 and 8.2 Archimedes Lever Rule At equilibrium (and with forces 90 to lever): r 1 F 1 = r 2 F 2 2 General Lever Rule For general angles r 1 F 1 sin θ
More informationTurning Forces and Levers. Junior Science
Turning Forces and Levers Junior Science Lesson Objectives Understand the terms - Lever, Fulcrum, Turning effect, Moment Recall the formula M= Fd and be able to calculate the moment of a force Be able
More informationIn order to get the G.C.S.E. grade you are capable of, you must make your own revision notes using your Physics notebook.
In order to get the G.C.S.E. grade you are capable of, you must make your own revision notes using your Physics notebook. When summarising notes, use different colours and draw diagrams/pictures. If you
More informationForces. Name and Surname: Class: L E A R N I N G O U T C O M E S. What is a force? How are forces measured? What do forces do?
F O R C E S P A G E 1 L E A R N I N G O U T C O M E S Forces What is a force? Y E A R 9, C H A P T E R 2 G J Z A H R A B. E D ( H O N S ) How are forces measured? What do forces do? Why do we need to think
More information2008 FXA THREE FORCES IN EQUILIBRIUM 1. Candidates should be able to : TRIANGLE OF FORCES RULE
THREE ORCES IN EQUILIBRIUM 1 Candidates should be able to : TRIANGLE O ORCES RULE Draw and use a triangle of forces to represent the equilibrium of three forces acting at a point in an object. State that
More informationThe diagram shows the wheel wrench being used without the handle extended.
Q. A company makes a wheel wrench with an extending handle. The company claims that the extending handle makes it easier to loosen the wheel nuts on a car. The diagram shows the wheel wrench being used
More informationLevers of the Musculoskeletal System
Levers of the Musculoskeletal System Lever system consists of: lever fulcrum load force Three classes of levers 1. first class (a) - pry bars, crowbars 2. second class (b) - wheelbarrow 3. third class
More informationTorque and levers * Free High School Science Texts Project. 1 Torque and Levers
OpenStax-CNX module: m38992 1 Torque and levers * Free High School Science Texts Project This work is produced by OpenStax-CNX and licensed under the Creative Commons Attribution License 3.0 1 Torque and
More informationUse the following equation to calculate the moment of child B about the pivot of the see-saw. moment of a force = force distance
Q1.Two children, A and B, are sitting on a see-saw, as shown in the figure below. The see-saw is balanced. (a) Use the following equation to calculate the moment of child B about the pivot of the see-saw.
More informationChapter 9 Rotational Dynamics
Chapter 9 ROTATIONAL DYNAMICS PREVIEW A force acting at a perpendicular distance from a rotation point, such as pushing a doorknob and causing the door to rotate on its hinges, produces a torque. If the
More informationTorque. 1. Torque - To make an object rotate, we must apply a force at a certain distance away from the axis => ex) opening a door
Torque Level : Conceptual Physics Teacher : Kim 1. Torque - To make an object rotate, we must apply a force at a certain distance away from the axis => ex) opening a door Torque is defined as τ = r F where
More informationPhysics 1A Lecture 10B
Physics 1A Lecture 10B "Sometimes the world puts a spin on life. When our equilibrium returns to us, we understand more because we've seen the whole picture. --Davis Barton Cross Products Another way to
More informationLecture 14. Rotational dynamics Torque. Give me a lever long enough and a fulcrum on which to place it, and I shall move the world.
Lecture 14 Rotational dynamics Torque Give me a lever long enough and a fulcrum on which to place it, and I shall move the world. Archimedes, 87 1 BC EXAM Tuesday March 6, 018 8:15 PM 9:45 PM Today s Topics:
More information4.0 m s 2. 2 A submarine descends vertically at constant velocity. The three forces acting on the submarine are viscous drag, upthrust and weight.
1 1 wooden block of mass 0.60 kg is on a rough horizontal surface. force of 12 N is applied to the block and it accelerates at 4.0 m s 2. wooden block 4.0 m s 2 12 N hat is the magnitude of the frictional
More informationChapter 8 Rotational Motion and Equilibrium. 1. Give explanation of torque in own words after doing balance-the-torques lab as an inquiry introduction
Chapter 8 Rotational Motion and Equilibrium Name 1. Give explanation of torque in own words after doing balance-the-torques lab as an inquiry introduction 1. The distance between a turning axis and the
More informationTorque. Objectives. Assessment. Assessment. Equations. Physics terms 6/2/14
Objectives Calculate torque given the lever arm (perpendicular distance) and the force. Calculate torque in newton meters and in pound feet. Interpret positive and negative signs in the context of torque.
More informationMoments of forces. Rudolf arnheim
T C Y Moments of forces The photograph shows a mobile tower crane, consisting of the main vertical section housing the engine, winding gear and controls and the boom which supports the load and the counterweight.
More informationWhen the applied force is not perpendicular to the crowbar, for example, the lever arm is found by drawing the perpendicular line from the fulcrum to
When the applied force is not perpendicular to the crowbar, for example, the lever arm is found by drawing the perpendicular line from the fulcrum to the line of action of the force. We call torques that
More informationChapter 5: Turning Effects of Forces
Chapter 5: Turning Effects of Forces Brief Recap [Centre of Gravity] 1. The centre of gravity of an object is defined as the point through which its whole weight appears to act for any orientation of the
More informationCasting Physics Simplified Part Two. Frames of Reference
Casting Physics Simplified Part Two Part one of this paper discussed physics that applies to linear motion, i.e., motion in a straight line. This section of the paper will expand these concepts to angular
More informationChapter 8 - Rotational Dynamics and Equilibrium REVIEW
Pagpalain ka! (Good luck, in Filipino) Date Chapter 8 - Rotational Dynamics and Equilibrium REVIEW TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) When a rigid body
More informationPhysics EXERCISE- 1 (A)
EXERCISE- 1 (A) Question 1: What are contact forces? Give two Examples. Solution 1: The forces which act on bodies when they are in physical contact, are called contact forces. For e.g. frictional force
More informationCenter of Mass. A baseball thrown into the air follows a smooth parabolic path. A baseball bat thrown into the air does not follow a smooth path.
Center of Mass A baseball thrown into the air follows a smooth parabolic path. A baseball bat thrown into the air does not follow a smooth path. The bat wobbles about a special point. This point stays
More informationTorque. Introduction. Torque. PHY torque - J. Hedberg
Torque PHY 207 - torque - J. Hedberg - 2017 1. Introduction 2. Torque 1. Lever arm changes 3. Net Torques 4. Moment of Rotational Inertia 1. Moment of Inertia for Arbitrary Shapes 2. Parallel Axis Theorem
More informationStatic Equilibrium and Torque
10.3 Static Equilibrium and Torque SECTION OUTCOMES Use vector analysis in two dimensions for systems involving static equilibrium and torques. Apply static torques to structures such as seesaws and bridges.
More informationEquilibrium Notes 1 Translational Equilibrium
Equilibrium Notes 1 Translational Equilibrium Ex. A 20.0 kg object is suspended by a rope as shown. What is the net force acting on it? Ex. Ok that was easy, now that same 20.0 kg object is lifted at a
More informationAl-Saudia Virtual Academy Pakistan Online Tuition Online Tutor Pakistan
Al-Saudia Virtual Academy Pakistan Online Tuition Online Tutor Pakistan Statics What do you mean by Resultant Force? Ans: Resultant Force: The sum of all forces acting upon a body is called Resultant Force.
More informationPhysics Knowledge Organiser P8 - Forces in balance
Scalar and vector quantities Scalar quantities have only a magnitude. Vector quantities have a magnitude and direction. Scalar Distance Speed mass Temperature Pressure Volume Work Vector Displacement Velocity
More informationChapter 8. Rotational Equilibrium and Rotational Dynamics
Chapter 8 Rotational Equilibrium and Rotational Dynamics Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and torque are related Torque The door is free to rotate about
More informationMATHEMATICAL SKILLS MOMENTS OF FORCE (RATIOS) AND EQUILIBRIUM AND ASSOCIATED EXAMINATION QUESTIONS.
MATHEMATICAL SKILLS MOMENTS OF FORCE (RATIOS) AND EQUILIBRIUM AND ASSOCIATED EXAMINATION QUESTIONS DESIGN AND TECHNOLOGY NOT FOR SALE OR REDISTRIBUTION THIS MATERIAL CANNOT BE EDITED OR PLACED ON ANY OTHER
More informationP12 Torque Notes.notebook. March 26, Torques
Torques The size of a torque depends on two things: 1. The size of the force being applied (a larger force will have a greater effect) 2. The distance away from the pivot point (the further away from this
More informationThe student will learn about the main purposes and the basic components of all machines. SIMPLE MACHINES. SPH4C Findlay
The student will learn about the main purposes and the basic components of all machines. SIMPLE MACHINES SPH4C Findlay What do you think of when you hear the word machine? Simple Machines Machines created
More informationSection 2: Static Equilibrium II- Balancing Torques
Section 2: Static Equilibrium II- Balancing Torques Last Section: If (ie. Forces up = Forces down and Forces left = Forces right), then the object will have no translatory motion. In other words, the object
More informationApplication of Forces. Chapter Eight. Torque. Force vs. Torque. Torque, cont. Direction of Torque 4/7/2015
Raymond A. Serway Chris Vuille Chapter Eight Rotational Equilibrium and Rotational Dynamics Application of Forces The point of application of a force is important This was ignored in treating objects as
More informationConsider two students pushing with equal force on opposite sides of a desk. Looking top-down on the desk:
1 Bodies in Equilibrium Recall Newton's First Law: if there is no unbalanced force on a body (i.e. if F Net = 0), the body is in equilibrium. That is, if a body is in equilibrium, then all the forces on
More informationChapter 8. Rotational Equilibrium and Rotational Dynamics
Chapter 8 Rotational Equilibrium and Rotational Dynamics 1 Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and torque are related 2 Torque The door is free to rotate
More informationStructures Activity 2 Levers
Structures Activity 2 Levers Object: The objects of this activity are to explore the concepts of torque and rotational equilibrium, study the three classes of lever, and apply the concepts of torque and
More informationForces in Action Past Paper Questions
Forces in Action Past Paper Questions Q1. The diagram shows a simple hydraulic jack. The jack is designed to lift a large weight using a much smaller force. (a) Complete the following sentence. A hydraulic
More information(Free Sample) PHYSICS FOUNDATION & OLYMPIAD CLASS - 9 E: X P L D R E: R BRAIN MAPPING MapptngYour Future ACADEMY
w w (F.bm re a e ta Sa le n m t. pl co e) m Integrated Syllabus FOUNDATION & OLYMPIAD l l Cross word Puzzles l Graded Exercise n Basic Practice n Further Practice n Brain Nurtures Numerical Problems Conceptual
More informationTorque rotational force which causes a change in rotational motion. This force is defined by linear force multiplied by a radius.
Warm up A remote-controlled car's wheel accelerates at 22.4 rad/s 2. If the wheel begins with an angular speed of 10.8 rad/s, what is the wheel's angular speed after exactly three full turns? AP Physics
More informationChapter 5 The Force Vector
Conceptual Physics/ PEP Name: Date: Chapter 5 The Force Vector Section Review 5.1 1. Indicate whether each of the following units of measurement are scalar or vector units: Speed _scalar time scalar mass
More informationChapter 11 Rotational Dynamics and Static Equilibrium. Copyright 2010 Pearson Education, Inc.
Chapter 11 Rotational Dynamics and Static Equilibrium Units of Chapter 11 Torque Torque and Angular Acceleration Zero Torque and Static Equilibrium Center of Mass and Balance Dynamic Applications of Torque
More informationCentripetal force keeps an object in circular motion Rotation and Revolution
Centripetal force keeps an object in circular motion. 10.1 Rotation and Revolution Two types of circular motion are and. An is the straight line around which rotation takes place. When an object turns
More informationRotational N.2 nd Law
Lecture 19 Chapter 12 Rotational N.2 nd Law Torque Newton 2 nd Law again!? That s it. He crossed the line! Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi IN THIS CHAPTER, you will
More informationSimple Machines. Bởi: OpenStaxCollege
F Simple Machines Simple Machines Bởi: OpenStaxCollege Simple machines are devices that can be used to multiply or augment a force that we apply often at the expense of a distance through which we apply
More information1.0 The distance taken for a car to stop after an emergency depends on two things:
4-5 Forces Physics.0 The distance taken for a car to stop after an emergency depends on two things: The thinking distance: how far the car travels while the driver processes the information. The braking
More informationEQUILIBRIUM OBJECTIVES PRE-LECTURE
27 FE3 EQUILIBRIUM Aims OBJECTIVES In this chapter you will learn the concepts and principles needed to understand mechanical equilibrium. You should be able to demonstrate your understanding by analysing
More informationUpthrust and Archimedes Principle
1 Upthrust and Archimedes Principle Objects immersed in fluids, experience a force which tends to push them towards the surface of the liquid. This force is called upthrust and it depends on the density
More informationPlease read this introductory material carefully; it covers topics you might not yet have seen in class.
b Lab Physics 211 Lab 10 Torque What You Need To Know: Please read this introductory material carefully; it covers topics you might not yet have seen in class. F (a) (b) FIGURE 1 Forces acting on an object
More informationAP Physics 1 Rotational Motion Practice Test
AP Physics 1 Rotational Motion Practice Test MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A spinning ice skater on extremely smooth ice is able
More informationChapter 10. Rotation
Chapter 10 Rotation Rotation Rotational Kinematics: Angular velocity and Angular Acceleration Rotational Kinetic Energy Moment of Inertia Newton s nd Law for Rotation Applications MFMcGraw-PHY 45 Chap_10Ha-Rotation-Revised
More informationCenter of Mass / Torque
Center of Mass / Torque Level : Physics I Teacher : Kim 1. Center of Mass( or Center of Gravity or Center of Weight) - The center of mass(com) of an object is the point located at the object s average
More informationCreated by T. Madas VECTOR MOMENTS. Created by T. Madas
VECTOR MOMENTS Question 1 (**) The vectors i, j and k are unit vectors mutually perpendicular to one another. Relative to a fixed origin O, a light rigid rod has its ends located at the points 0, 7,4 B
More informationRotational N.2 nd Law
Lecture 0 Chapter 1 Physics I Rotational N. nd Law Torque Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi IN THIS CHAPTER, you will continue discussing rotational dynamics Today
More informationLever Lab: First Class Lever
Lever Lab 2 Name: Lever Lab: First Class Lever Objective: To investigate the use of a lever as a simple machine. Materials: Workshop Stand, Lever, Bolt, Hooked Masses Background: A lever is one of the
More informationSection 2: Static Equilibrium II- Balancing Torques
Section 2: Static Equilibrium II- Balancing Torques Last Section: If (ie. Forces up = Forces down and Forces left = Forces right), then the object will have no translatory motion. In other words, the object
More informationis the study of and. We study objects. is the study of and. We study objects.
Static Equilibrium Translational Forces Torque Unit 4 Statics Dynamics vs Statics is the study of and. We study objects. is the study of and. We study objects. Recall Newton s First Law All objects remain
More informationPhysics 201 Lab 9: Torque and the Center of Mass Dr. Timothy C. Black
Theoretical Discussion Physics 201 Lab 9: Torque and the Center of Mass Dr. Timothy C. Black For each of the linear kinematic variables; displacement r, velocity v and acceleration a; there is a corresponding
More informationTEST-1 MEACHNICAL (MEACHNICS)
1 TEST-1 MEACHNICAL (MEACHNICS) Objective Type Questions:- Q.1 The term force may be defined as an agent t which produces or tends to produce, destroys or tends to destroy motion. a) Agree b) disagree
More informationRecap I. Angular position: Angular displacement: s. Angular velocity: Angular Acceleration:
Recap I Angular position: Angular displacement: s Angular velocity: Angular Acceleration: Every point on a rotating rigid object has the same angular, but not the same linear motion! Recap II Circular
More informationGeneral Physics (PHY 2130)
General Physics (PHY 130) Lecture 0 Rotational dynamics equilibrium nd Newton s Law for rotational motion rolling Exam II review http://www.physics.wayne.edu/~apetrov/phy130/ Lightning Review Last lecture:
More information2.1 Introduction to Simple Machines
2.1 Introduction to Simple Machines 2.1 Introduction to Simple Machines Simple Machines Unit DO NOT WRITE ANYWHERE IN THIS PACKAGE One of the few properties that separate us from animals is our ability
More informationTorque. Physics 6A. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB
Physics 6A Torque is what causes angular acceleration (just like a force causes linear acceleration) Torque is what causes angular acceleration (just like a force causes linear acceleration) For a torque
More informationTORQUE Diandra Leslie-Pelecky Edited by Anne Starace
TORQUE Diandra Leslie-Pelecky Edited by Anne Starace Abstract: As you may have noticed, it is much more difficult to hold an object at arm s length than close to your body and door handles are placed on
More informationACTIVITY SHEETS PHYSICS AND CHEMISTRY 2 nd ESO NAME:
ACTIVITY SHEETS PHYSICS AND CHEMISTRY 2 nd ESO NAME: Lesson 7. FORCES ACTIVITY 1 1.-What happens if you hit or push a ball in these cases? a) The ball is at rest. b) The ball is in motion. c) The ball
More informationSPH 4C Unit 2 Mechanical Systems
SPH 4C Unit 2 Mechanical Systems Forces and Free Body Diagrams Learning Goal: I can consistently identify and draw Free Body Diagrams for given real world situations. There are 4 fundamental forces Gravity
More informationEquilibrium of rigid bodies Mehrdad Negahban (1999)
Equilibrium of rigid bodies Mehrdad Negahban (1999) Static equilibrium for a rigid body: A body (or any part of it) which is currently stationary will remain stationary if the resultant force and resultant
More informationChapter 5: Forces in Equilibrium
Chapter 5: Forces in Equilibrium I don't know what I may seem to the world, but, as to myself, I seem to have been only like a boy playing on the sea shore, and diverting myself in now and then finding
More informationUNIT - I. Review of the three laws of motion and vector algebra
UNIT - I Review of the three laws of motion and vector algebra In this course on Engineering Mechanics, we shall be learning about mechanical interaction between bodies. That is we will learn how different
More informationMass per unit volume Mass of 1 m 3. Units of density = kg m 3 Density is a scalar. mass volume. density = m V. rho. 1m x 1m x 1m
1 Mass per unit volume Mass of 1 m 3 density = mass volume rho ρ = m V 1m x 1m x 1m Units of density = kg m 3 Density is a scalar 2 1000 kg 5100 kg 8900 kg Each has a volume of 1 m 3. Which has the greatest
More informationPhysics 8 Wednesday, October 28, 2015
Physics 8 Wednesday, October 8, 015 HW7 (due this Friday will be quite easy in comparison with HW6, to make up for your having a lot to read this week. For today, you read Chapter 3 (analyzes cables, trusses,
More informationRotational Kinetic Energy
Lecture 17, Chapter 10: Rotational Energy and Angular Momentum 1 Rotational Kinetic Energy Consider a rigid body rotating with an angular velocity ω about an axis. Clearly every point in the rigid body
More informationCenter of Gravity Pearson Education, Inc.
Center of Gravity = The center of gravity position is at a place where the torque from one end of the object is balanced by the torque of the other end and therefore there is NO rotation. Fulcrum Point
More informationRotation of Rigid Objects
Notes 12 Rotation and Extended Objects Page 1 Rotation of Rigid Objects Real objects have "extent". The mass is spread out over discrete or continuous positions. THERE IS A DISTRIBUTION OF MASS TO "AN
More informationPhysics 8 Wednesday, October 25, 2017
Physics 8 Wednesday, October 25, 2017 HW07 due Friday. It is mainly rotation, plus a couple of basic torque questions. And there are only 8 problems this week. For today, you read (in Perusall) Onouye/Kane
More informationModels and Anthropometry
Learning Objectives Models and Anthropometry Readings: some of Chapter 8 [in text] some of Chapter 11 [in text] By the end of this lecture, you should be able to: Describe common anthropometric measurements
More informationL-10 Torque and Rotational Motion TORQUE. Torque = force times lever arm. Torque = F L. Torque example
L-10 Torque and Rotational Motion What makes something rotate in the first place? TORQUE How do I apply a force to make the rod rotate about the axel? Not just anywhere! Torque makes things spin! AXEL
More informationUnit 4 Statics. Static Equilibrium Translational Forces Torque
Unit 4 Statics Static Equilibrium Translational Forces Torque 1 Dynamics vs Statics Dynamics: is the study of forces and motion. We study why objects move. Statics: is the study of forces and NO motion.
More informationFigure Two. Then the two vector equations of equilibrium are equivalent to three scalar equations:
2004- v 10/16 2. The resultant external torque (the vector sum of all external torques) acting on the body must be zero about any origin. These conditions can be written as equations: F = 0 = 0 where the
More informationStatic equilibrium. Objectives. Physics terms. Assessment. Brainstorm. Equations 6/3/14
Static equilibrium Objectives State the conditions of static equilibrium in terms of forces and torques. Draw a free-body diagram of a lever showing all forces. Use the condition of equilibrium to solve
More informationPHYSICS - CLUTCH CH 13: ROTATIONAL EQUILIBRIUM.
!! www.clutchprep.com EXAMPLE: POSITION OF SECOND KID ON SEESAW EXAMPLE: A 4 m-long seesaw 50 kg in mass and of uniform mass distribution is pivoted on a fulcrum at its middle, as shown. Two kids sit on
More informationTwo children, A and B, are sitting on a see-saw, as shown in the figure below.
Two children, A and B, are sitting on a see-saw, as shown in the figure below. The see-saw is balanced. (a) Use the following equation to calculate the moment of child B about the pivot of the see-saw.
More informationuse one of the methods to compute the magnitude of the torque, given the magnitudes of the force and position vector
PH2213 : Examples from Chapter 12 : Static Equilibrium Equilibrium represents the condition where an object is not accelerating (either linearly or angularly). It can still be moving (and rotating), it
More informationHow Can Motion be Described? and Explained?
How Can Motion be Described? and Explained? Lesson 14: Torque and the Stability of Structures Stable Structures Explain why structures should be stable. What are the conditions for a structure to be stable?
More informationStatics : Rigid Bodies
Statics : Rigid Bodies The Moment of a Force The moment M (turning effect) of a force about a point O is the product of the magnitude of the force (F) and the perp. distance (x)to the point of application.
More informationName Section Number Team Number
Physics 218 LAB: TORQUES and STATIC EQUILIBRIUM Name Section Number Team Number Introduction One purpose of this lab is to introduce you to quantity called torque or, as engineers cail it, moment of a
More informationAP Physics Multiple Choice Practice Torque
AP Physics Multiple Choice Practice Torque 1. A uniform meterstick of mass 0.20 kg is pivoted at the 40 cm mark. Where should one hang a mass of 0.50 kg to balance the stick? (A) 16 cm (B) 36 cm (C) 44
More informationGIRLS SECONDARY MRIEĦEL HALF YEARLY EXAMINATION 2015/2016. TIME: 1½hrs FORM 3 Track 2. Class: Index:
GIRLS SECONDARY MRIEĦEL HALF YEARLY EXAMINATION 2015/2016 TIME: 1½hrs FORM 3 Track 2 Name: Class: Index: Notes for candidates: Answer all the questions. Write down your answers in the spaces provided.
More informationEpisode 203: Turning effects
Episode 203: Turning effects Many students will recall the principle of moments from earlier work. The application of moments to situations beyond the simple see-saw examples met earlier in the school
More informationThe case where there is no net effect of the forces acting on a rigid body
The case where there is no net effect of the forces acting on a rigid body Outline: Introduction and Definition of Equilibrium Equilibrium in Two-Dimensions Special cases Equilibrium in Three-Dimensions
More informationStatic Equilibrium; Torque
Static Equilibrium; Torque The Conditions for Equilibrium An object with forces acting on it, but that is not moving, is said to be in equilibrium. The first condition for equilibrium is that the net force
More informationCIE Physics IGCSE. Topic 1: General Physics
CIE Physics IGCSE Topic 1: General Physics Summary Notes Length and time A ruler (rule) is used to measure the length of an object between 1mm and 1m. The volume of an object of irregular shape can be
More informationChapter 9: Rotational Dynamics Tuesday, September 17, 2013
Chapter 9: Rotational Dynamics Tuesday, September 17, 2013 10:00 PM The fundamental idea of Newtonian dynamics is that "things happen for a reason;" to be more specific, there is no need to explain rest
More informationScience Olympiad. Machines. Roger Demos
Science Olympiad Machines. Roger Demos Some Basic Physics Concepts What do Machines do? Do they allow one to do more work? Not really, at best they make completing a task easier. So then what do Machines
More informationRotational Equilibrium
Rotational Equilibrium 6-1 Rotational Equilibrium INTRODUCTION Have you ever tried to pull a stubborn nail out of a board or develop your forearm muscles by lifting weights? Both these activities involve
More informationWhich row, A to D, in the table correctly shows the quantities conserved in an inelastic collision? mass momentum kinetic energy total energy
1 Water of density 1000 kg m 3 flows out of a garden hose of cross-sectional area 7.2 10 4 m 2 at a rate of 2.0 10 4 m 3 per second. How much momentum is carried by the water leaving the hose per second?
More informationSimple Machines. Wei-Chih Wang University of Washington
Simple Machines Wei-Chih Wang University of Washington What is Engineering? To different people, it means different things To me, it s an Art (constructive imagination) and sometimes it means making Toy
More information