ECGR4124 Digital Signal Processing Midterm Spring 2010
|
|
- Audra Griffith
- 5 years ago
- Views:
Transcription
1 ECGR4124 Digital Signal Processing Midterm Spring 2010 Name: LAST 4 DIGITS of Student Number: Do NOT begin until told to do so Make sure that you have all pages before starting Open book, 1 sheet front/back notes, NO CALCULATOR DO ALL WORK IN THE SPACE GIVEN Do NOT use the back of the pages, do NOT turn in extra sheets of work/paper Multiple-choice answers should be within 5% of correct value Show ALL work, even for multiple choice ACADEMIC INTEGRITY: Students have the responsibility to know and observe the requirements of The UNCC Code of Student Academic Integrity. This code forbids cheating, fabrication or falsification of information, multiple submission of academic work, plagiarism, abuse of academic materials, and complicity in academic dishonesty. Unless otherwise noted: F{} denotes Discrete timefourier transform {DTFT, DFT, or Continuous, as implied in problem} F -1 {} denotes inverse Fourier transform ω denotes frequency in rad/sample, Ω denotes frequency in rad/second denotes linear convolution, N denotes circular convolution x*(t) denotes the conjugate of x(t) Useful constants, etc: e 2.72 π /e ln( 2 ) 0.69 ln( 4 ) 1.38 log 10 ( 2 ) 0.30 log 10 ( 3 ) 0.48 log 10 ( 10 ) 1.0 log 10 ( 0.1 ) -1 log 10 ( e ) 0.43 cos(π / 4) 0.71 cos( A ) cos ( B ) = 0.5 cos(a - B) cos(a + B) e j θ = cos(θ) + j sin(θ) 1/11
2 1. If x[n] = 5u[n-1] - u[n-4] + 3 δ[n-1] then, x[4] equals a) -1 b) 2 c) 4 d) none above 2. The signal x[n] = sin[2n] has a discrete-time frequency ω = a) 2 rad/sample b) 2π rad/sample c) 4π rad/sample d) none above 3. A continuous time signal is defined as x(t)=cos( 10πt) + cos(5πt ). To prevent aliasing, x(t) should be sampled at a rate greater than a) 10 samples/second b) 20 samples/second c) 40π samples/second d) none above 4. A continuous-time signal cos(1000πt) sampled at 1000 samples/second would correspond to a discrete-time frequency of ω = a) π/4 rad/sample b) π rad/sample c) 500 rad/sample d) none above 5. The DTFT of x[n] = ( 0.1 ) n u[n] is X(ω) = a) 1/( 1 10 e -jω ) b) 1/( e -jω ) c) 1/( e -jω ) d) none above 2/11
3 6. The system with input x[n] and output y[n] = x[n] + x 2 [n-1] is linear. 7. If a linear time invariant system has impulse response h[n]=2δ[n-2], the output response to an input signal of u[n-2] is. a) u[n-1] b) 2u[n-2] δ[n-2] c) 2u[n-4] d) none above 8. If x[n] = δ[n-1], h[n] = δ[n] - 2δ[n-1], and y[n] = x[n] h[n], where denotes convolution, then, y[1] equals a) 1 b) 2 c) -2 d) none above 9. The difference equation for a system is y[n] = 3x[n] + x[n-2]. The impulse response of the system is h[n] = a) 3u[n] + u[n-2] b) 3δ [n] + δ [n-2] c) 3 + e -2jt d) none above 10. The circular convolution of the two 4-point sequences x[n] = {1,0,0,1} and y[n] = {1,2,3,4 } is a) {2,2,3,5} b) {4,5,3,7} c) {3,5,7,5} d) none above 3/11
4 11. The ideal reconstruction filter for reconstructing a signal from its samples is an ideal lowpass filter with amplitude T s and cutoff frequency Ω = 1/T s where T s is the sampling period of the system. 12. Circle the BIBO stable impulse response below. a) h[n]=(0.01) -n u[n] b) h[n]=(1.11) -n u[n] c) h[n]= (1.01) n u[n] d) none above 13. The FFT is a fast version of the DFT. 14. (( - 4 )) 4 = a) -4 b) 4 c) 0 d) none above 15. If the four point sequence x[n] = {1,2,3,4}, then x[ ((n+1)) 4 ] = a) {4,3,2,1} b) {4,1,2,3} c) {1,4,3,2} d) none above 4/11
5 16. The dc response of a system with impulse response h[n] = 3δ [n-1] -2 δ [n-2] is H(ω) ω=0 = a) e j ω - e j3ω b) 2 c) 3 d) none above 17. The DTFT of x[n] = δ[n-3] is X(ω) = a) 1 b) 1/( 1 δ[ω-3]e -jω ) c) e -j3ω d) none above 18. A system has an impulse response h[n] = δ[n] + δ [n-2]. The frequency response of the system H(ω), at ω=π, is H(π)= a) 0 b) 1 c) 2 d) none above 19. The DFT of the four point sequence x[n] ={1,0,-1,0} is X[k] = a) {1, 1, 0, -1} b) {0,2,0,2} c) {1,0,-1,0} d) none above 20. An LTI system with y[n] = x[k] is an accumulator. n k= 5/11
6 21. The circular convolution of the two 8-point sequences x[n] = {1,1,0,0, 0,0,0,0} and y[n] = {1,1,1,1, 0,0,0,0} is a) {1,2,3, 2, 1,0,0,0} b) {1,2,2,2, 1,0,0,0} c) {1,2,3,3, 2,1,0,0} d) none above 22. The system with impulse response h[n]= 4 -n u[n] is BIBO stable. 23. A discrete-time sinusoid with ω = π/4 rad/sample (sampled at 8000 samples/second) has a corresponding continuous-time frequency of f = a) 500 Hz b) 500π Hz c) 1000 Hz d) none above 24. The difference equation for a system is y[n] + 5y[n-1]= x[n] + 2x[n-1]. The frequency response of the system is H(ω) = a) 1+ 2e jω 1 5e jω b) 1+ 2e jω jω 1+ 5e c) jω 1+ 5e 1 2e jω d) none above 25. The DFT of the 4-point sequence x[ ((n-1)) 4 ] is X[k] = a) X[k] δ[ω-1] b) ( j) k X[k] c) e -jkω X[k] d) none above 6/11
7 26. The first four points of x[n] (at n=0,1,2,3) in sampling x(t)=e jπ t at 2 sample/second are: a) {1,0,1,0} b) { e j0, e jπω, e j2πω, e j3πω } c) {1, j,-1,-j} d) none above 27. The signal x[n] = ( -1 ) n is periodic with discrete-time frequency ω = π/2. === 28. The 2-point Fourier matrix W 2 is a) b) c) b) none above 29. If (12) , then the rms quantization noise of a 3-bit ADC with 0.7 volt step size is a) 0.2 V rms b) 0.7 V rms c) 3.5 V rms d) none above 30. The frequency response of the system below is H(ω) = a) 1+ 2e jω 1 5e jω b) 1+ 2e jω jω 1+ 5e c) jω 1+ 5e 1 2e jω d) none above 7/11
8 The system below is represented by difference equation y[n] = Ay[n-1] + Bx[n] + Cx[n-1] + Dx[n-2]. 31. In the difference equation, the coefficient A should be A = a) 1 b) 3 c) 5 d) 7 e) none above 32. In the difference equation, the coefficient B should be B = a) 1 b) 3 c) 5 d) 7 e) none above 33. In the difference equation, the coefficient C should be C = a) 1 b) 3 c) 5 d) 7 e) none above 34. The first 3 points of the impulse response of the system above is a) {1, 3, 5} b) {1, 7, 5} c) {1, 5, 15} d) none above 35. The system above is BIBO stable. 8/11
9 The frequency spectrum X(Ω) of continuous time signal x(t) is given below π 0 40π Ω 5 Points Each (Circle the best answer) 36. Highest frequency component in the time signal x(t) is a) 5 Hz b) 10 Hz c) 15 Hz d) 20 Hz 37. If the continuous time signal is sampled at 20 samples per second, the following plot is the magnitude of the discrete- time frequency spectrum X(ω) π 0 2π ω 38. If the continuous time signal x(t) is sampled at 15 samples per second, there will be aliasing 9/11
10 The frequency spectrum X(ω) of discrete time signal x[n] is given below. X(ω) 8 0 -π 0 π ω 5 Points Each (Circle the best answer) 39. The 6 db bandwidth of the system X(ω) above is a) π/8 rad/sample b) π/4 rad/sample c) π/2 rad/sample d) none above 40. The 8-point DFT, X[k], corresponding to the signal with spectrum X(ω) shown above is X[k] = {8,6,4,2,0,2,4,6} as shown in the plot below. X[k] k 10/11
11 The following questions refer to the Java class below and the program main(). public class Green { private int a; private int b; public Green(int aa, int bb) { a=aa; b=bb; } public void equals(green c) { this.a= c.a; this.b=c.b; } public void fn(green c) { this.a= c.a + this.a; this.b = c.b - this.b; } } public static void main(string[] args) { Green x = new Green (2,4); Green y = new Green (3,5); Green z = new Green (7,8); int xx=1,yy=2,zz=3; x.fn(y); z.equals(y); } 41. At the end of the main program, x.a= a) 1 b) 2 c) 3 d) None above 42. At the end of the main program, x.b= a) 1 b) 2 c) 3 d) None above 43. At the end of the main program, y.a= a) 1 b) 2 c) 3 d) None above 44. At the end of the main program, z.a= a) 1 b) 2 c) 3 d) None above 11/11
ECGR4124 Digital Signal Processing Final Spring 2009
ECGR4124 Digital Signal Processing Final Spring 2009 Name: LAST 4 NUMBERS of Student Number: Do NOT begin until told to do so Make sure that you have all pages before starting Open book, 2 sheet front/back
More informationECGR4124 Digital Signal Processing Exam 2 Spring 2017
ECGR4124 Digital Signal Processing Exam 2 Spring 2017 Name: LAST 4 NUMBERS of Student Number: Do NOT begin until told to do so Make sure that you have all pages before starting NO TEXTBOOK, NO CALCULATOR,
More informationECE-314 Fall 2012 Review Questions for Midterm Examination II
ECE-314 Fall 2012 Review Questions for Midterm Examination II First, make sure you study all the problems and their solutions from homework sets 4-7. Then work on the following additional problems. Problem
More informationEE 224 Signals and Systems I Review 1/10
EE 224 Signals and Systems I Review 1/10 Class Contents Signals and Systems Continuous-Time and Discrete-Time Time-Domain and Frequency Domain (all these dimensions are tightly coupled) SIGNALS SYSTEMS
More informationELEN E4810: Digital Signal Processing Topic 11: Continuous Signals. 1. Sampling and Reconstruction 2. Quantization
ELEN E4810: Digital Signal Processing Topic 11: Continuous Signals 1. Sampling and Reconstruction 2. Quantization 1 1. Sampling & Reconstruction DSP must interact with an analog world: A to D D to A x(t)
More informationReview of Discrete-Time System
Review of Discrete-Time System Electrical & Computer Engineering University of Maryland, College Park Acknowledgment: ENEE630 slides were based on class notes developed by Profs. K.J. Ray Liu and Min Wu.
More informationThe Johns Hopkins University Department of Electrical and Computer Engineering Introduction to Linear Systems Fall 2002.
The Johns Hopkins University Department of Electrical and Computer Engineering 505.460 Introduction to Linear Systems Fall 2002 Final exam Name: You are allowed to use: 1. Table 3.1 (page 206) & Table
More informationUNIVERSITY OF OSLO. Faculty of mathematics and natural sciences. Forslag til fasit, versjon-01: Problem 1 Signals and systems.
UNIVERSITY OF OSLO Faculty of mathematics and natural sciences Examination in INF3470/4470 Digital signal processing Day of examination: December 1th, 016 Examination hours: 14:30 18.30 This problem set
More informationSignals and Systems. Problem Set: The z-transform and DT Fourier Transform
Signals and Systems Problem Set: The z-transform and DT Fourier Transform Updated: October 9, 7 Problem Set Problem - Transfer functions in MATLAB A discrete-time, causal LTI system is described by the
More informationNAME: 11 December 2013 Digital Signal Processing I Final Exam Fall Cover Sheet
NAME: December Digital Signal Processing I Final Exam Fall Cover Sheet Test Duration: minutes. Open Book but Closed Notes. Three 8.5 x crib sheets allowed Calculators NOT allowed. This test contains four
More informationECE538 Final Exam Fall 2017 Digital Signal Processing I 14 December Cover Sheet
ECE58 Final Exam Fall 7 Digital Signal Processing I December 7 Cover Sheet Test Duration: hours. Open Book but Closed Notes. Three double-sided 8.5 x crib sheets allowed This test contains five problems.
More informationDiscrete Time Systems
1 Discrete Time Systems {x[0], x[1], x[2], } H {y[0], y[1], y[2], } Example: y[n] = 2x[n] + 3x[n-1] + 4x[n-2] 2 FIR and IIR Systems FIR: Finite Impulse Response -- non-recursive y[n] = 2x[n] + 3x[n-1]
More informationEEL3135: Homework #4
EEL335: Homework #4 Problem : For each of the systems below, determine whether or not the system is () linear, () time-invariant, and (3) causal: (a) (b) (c) xn [ ] cos( 04πn) (d) xn [ ] xn [ ] xn [ 5]
More informationECE 350 Signals and Systems Spring 2011 Final Exam - Solutions. Three 8 ½ x 11 sheets of notes, and a calculator are allowed during the exam.
ECE 35 Spring - Final Exam 9 May ECE 35 Signals and Systems Spring Final Exam - Solutions Three 8 ½ x sheets of notes, and a calculator are allowed during the exam Write all answers neatly and show your
More informationEE301 Signals and Systems In-Class Exam Exam 3 Thursday, Apr. 19, Cover Sheet
EE301 Signals and Systems In-Class Exam Exam 3 Thursday, Apr. 19, 2012 Cover Sheet Test Duration: 75 minutes. Coverage: Chaps. 5,7 Open Book but Closed Notes. One 8.5 in. x 11 in. crib sheet Calculators
More informationMultidimensional digital signal processing
PSfrag replacements Two-dimensional discrete signals N 1 A 2-D discrete signal (also N called a sequence or array) is a function 2 defined over thex(n set 1 of, n 2 ordered ) pairs of integers: y(nx 1,
More informationYour solutions for time-domain waveforms should all be expressed as real-valued functions.
ECE-486 Test 2, Feb 23, 2017 2 Hours; Closed book; Allowed calculator models: (a) Casio fx-115 models (b) HP33s and HP 35s (c) TI-30X and TI-36X models. Calculators not included in this list are not permitted.
More informationFinal Exam January 31, Solutions
Final Exam January 31, 014 Signals & Systems (151-0575-01) Prof. R. D Andrea & P. Reist Solutions Exam Duration: Number of Problems: Total Points: Permitted aids: Important: 150 minutes 7 problems 50 points
More informationDigital Signal Processing Lecture 3 - Discrete-Time Systems
Digital Signal Processing - Discrete-Time Systems Electrical Engineering and Computer Science University of Tennessee, Knoxville August 25, 2015 Overview 1 2 3 4 5 6 7 8 Introduction Three components of
More informationEach problem is worth 25 points, and you may solve the problems in any order.
EE 120: Signals & Systems Department of Electrical Engineering and Computer Sciences University of California, Berkeley Midterm Exam #2 April 11, 2016, 2:10-4:00pm Instructions: There are four questions
More informationUNIVERSITY OF OSLO. Please make sure that your copy of the problem set is complete before you attempt to answer anything.
UNIVERSITY OF OSLO Faculty of mathematics and natural sciences Examination in INF3470/4470 Digital signal processing Day of examination: December 9th, 011 Examination hours: 14.30 18.30 This problem set
More informationEE Homework 13 - Solutions
EE3054 - Homework 3 - Solutions. (a) The Laplace transform of e t u(t) is s+. The pole of the Laplace transform is at which lies in the left half plane. Hence, the Fourier transform is simply the Laplace
More information! Circular Convolution. " Linear convolution with circular convolution. ! Discrete Fourier Transform. " Linear convolution through circular
Previously ESE 531: Digital Signal Processing Lec 22: April 18, 2017 Fast Fourier Transform (con t)! Circular Convolution " Linear convolution with circular convolution! Discrete Fourier Transform " Linear
More informationECE 301 Division 1 Final Exam Solutions, 12/12/2011, 3:20-5:20pm in PHYS 114.
ECE 301 Division 1 Final Exam Solutions, 12/12/2011, 3:20-5:20pm in PHYS 114. The exam for both sections of ECE 301 is conducted in the same room, but the problems are completely different. Your ID will
More informationChapter 5 Frequency Domain Analysis of Systems
Chapter 5 Frequency Domain Analysis of Systems CT, LTI Systems Consider the following CT LTI system: xt () ht () yt () Assumption: the impulse response h(t) is absolutely integrable, i.e., ht ( ) dt< (this
More informationGrades will be determined by the correctness of your answers (explanations are not required).
6.00 (Fall 2011) Final Examination December 19, 2011 Name: Kerberos Username: Please circle your section number: Section Time 2 11 am 1 pm 4 2 pm Grades will be determined by the correctness of your answers
More information! Introduction. ! Discrete Time Signals & Systems. ! Z-Transform. ! Inverse Z-Transform. ! Sampling of Continuous Time Signals
ESE 531: Digital Signal Processing Lec 25: April 24, 2018 Review Course Content! Introduction! Discrete Time Signals & Systems! Discrete Time Fourier Transform! Z-Transform! Inverse Z-Transform! Sampling
More informationEECE 301 Signals & Systems Prof. Mark Fowler
EECE 3 Signals & Systems Prof. ark Fowler Note Set #28 D-T Systems: DT Filters Ideal & Practical /4 Ideal D-T Filters Just as in the CT case we can specify filters. We looked at the ideal filter for the
More informationE : Lecture 1 Introduction
E85.2607: Lecture 1 Introduction 1 Administrivia 2 DSP review 3 Fun with Matlab E85.2607: Lecture 1 Introduction 2010-01-21 1 / 24 Course overview Advanced Digital Signal Theory Design, analysis, and implementation
More informationChap 2. Discrete-Time Signals and Systems
Digital Signal Processing Chap 2. Discrete-Time Signals and Systems Chang-Su Kim Discrete-Time Signals CT Signal DT Signal Representation 0 4 1 1 1 2 3 Functional representation 1, n 1,3 x[ n] 4, n 2 0,
More information/ (2π) X(e jω ) dω. 4. An 8 point sequence is given by x(n) = {2,2,2,2,1,1,1,1}. Compute 8 point DFT of x(n) by
Code No: RR320402 Set No. 1 III B.Tech II Semester Regular Examinations, Apr/May 2006 DIGITAL SIGNAL PROCESSING ( Common to Electronics & Communication Engineering, Electronics & Instrumentation Engineering,
More informationDHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC2314- DIGITAL SIGNAL PROCESSING UNIT I INTRODUCTION PART A
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC2314- DIGITAL SIGNAL PROCESSING UNIT I INTRODUCTION PART A Classification of systems : Continuous and Discrete
More informationSolutions. Number of Problems: 10
Final Exam February 9th, 2 Signals & Systems (5-575-) Prof. R. D Andrea Solutions Exam Duration: 5 minutes Number of Problems: Permitted aids: One double-sided A4 sheet. Questions can be answered in English
More informationGrades will be determined by the correctness of your answers (explanations are not required).
6.00 (Fall 20) Final Examination December 9, 20 Name: Kerberos Username: Please circle your section number: Section Time 2 am pm 4 2 pm Grades will be determined by the correctness of your answers (explanations
More informationEE 3054: Signals, Systems, and Transforms Spring A causal discrete-time LTI system is described by the equation. y(n) = 1 4.
EE : Signals, Systems, and Transforms Spring 7. A causal discrete-time LTI system is described by the equation Test y(n) = X x(n k) k= No notes, closed book. Show your work. Simplify your answers.. A discrete-time
More informationFinal Exam ECE301 Signals and Systems Friday, May 3, Cover Sheet
Name: Final Exam ECE3 Signals and Systems Friday, May 3, 3 Cover Sheet Write your name on this page and every page to be safe. Test Duration: minutes. Coverage: Comprehensive Open Book but Closed Notes.
More informationVALLIAMMAI ENGINEERING COLLEGE. SRM Nagar, Kattankulathur DEPARTMENT OF INFORMATION TECHNOLOGY. Academic Year
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur- 603 203 DEPARTMENT OF INFORMATION TECHNOLOGY Academic Year 2016-2017 QUESTION BANK-ODD SEMESTER NAME OF THE SUBJECT SUBJECT CODE SEMESTER YEAR
More informationEECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 12
EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 12 Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can use
More informationx[n] = x a (nt ) x a (t)e jωt dt while the discrete time signal x[n] has the discrete-time Fourier transform x[n]e jωn
Sampling Let x a (t) be a continuous time signal. The signal is sampled by taking the signal value at intervals of time T to get The signal x(t) has a Fourier transform x[n] = x a (nt ) X a (Ω) = x a (t)e
More informationENT 315 Medical Signal Processing CHAPTER 2 DISCRETE FOURIER TRANSFORM. Dr. Lim Chee Chin
ENT 315 Medical Signal Processing CHAPTER 2 DISCRETE FOURIER TRANSFORM Dr. Lim Chee Chin Outline Introduction Discrete Fourier Series Properties of Discrete Fourier Series Time domain aliasing due to frequency
More informationResponses of Digital Filters Chapter Intended Learning Outcomes:
Responses of Digital Filters Chapter Intended Learning Outcomes: (i) Understanding the relationships between impulse response, frequency response, difference equation and transfer function in characterizing
More informationVery useful for designing and analyzing signal processing systems
z-transform z-transform The z-transform generalizes the Discrete-Time Fourier Transform (DTFT) for analyzing infinite-length signals and systems Very useful for designing and analyzing signal processing
More informationELEN 4810 Midterm Exam
ELEN 4810 Midterm Exam Wednesday, October 26, 2016, 10:10-11:25 AM. One sheet of handwritten notes is allowed. No electronics of any kind are allowed. Please record your answers in the exam booklet. Raise
More informationDigital Signal Processing. Lecture Notes and Exam Questions DRAFT
Digital Signal Processing Lecture Notes and Exam Questions Convolution Sum January 31, 2006 Convolution Sum of Two Finite Sequences Consider convolution of h(n) and g(n) (M>N); y(n) = h(n), n =0... M 1
More informationCh.11 The Discrete-Time Fourier Transform (DTFT)
EE2S11 Signals and Systems, part 2 Ch.11 The Discrete-Time Fourier Transform (DTFT Contents definition of the DTFT relation to the -transform, region of convergence, stability frequency plots convolution
More informationQUESTION BANK SIGNALS AND SYSTEMS (4 th SEM ECE)
QUESTION BANK SIGNALS AND SYSTEMS (4 th SEM ECE) 1. For the signal shown in Fig. 1, find x(2t + 3). i. Fig. 1 2. What is the classification of the systems? 3. What are the Dirichlet s conditions of Fourier
More informationQuestion Paper Code : AEC11T02
Hall Ticket No Question Paper Code : AEC11T02 VARDHAMAN COLLEGE OF ENGINEERING (AUTONOMOUS) Affiliated to JNTUH, Hyderabad Four Year B. Tech III Semester Tutorial Question Bank 2013-14 (Regulations: VCE-R11)
More informationEE538 Final Exam Fall 2007 Mon, Dec 10, 8-10 am RHPH 127 Dec. 10, Cover Sheet
EE538 Final Exam Fall 2007 Mon, Dec 10, 8-10 am RHPH 127 Dec. 10, 2007 Cover Sheet Test Duration: 120 minutes. Open Book but Closed Notes. Calculators allowed!! This test contains five problems. Each of
More informationESE 531: Digital Signal Processing
ESE 531: Digital Signal Processing Lec 6: January 30, 2018 Inverse z-transform Lecture Outline! z-transform " Tie up loose ends " Regions of convergence properties! Inverse z-transform " Inspection " Partial
More informationECE 413 Digital Signal Processing Midterm Exam, Spring Instructions:
University of Waterloo Department of Electrical and Computer Engineering ECE 4 Digital Signal Processing Midterm Exam, Spring 00 June 0th, 00, 5:0-6:50 PM Instructor: Dr. Oleg Michailovich Student s name:
More informationLecture 13: Discrete Time Fourier Transform (DTFT)
Lecture 13: Discrete Time Fourier Transform (DTFT) ECE 401: Signal and Image Analysis University of Illinois 3/9/2017 1 Sampled Systems Review 2 DTFT and Convolution 3 Inverse DTFT 4 Ideal Lowpass Filter
More informationLecture 10. Digital Signal Processing. Chapter 7. Discrete Fourier transform DFT. Mikael Swartling Nedelko Grbic Bengt Mandersson. rev.
Lecture 10 Digital Signal Processing Chapter 7 Discrete Fourier transform DFT Mikael Swartling Nedelko Grbic Bengt Mandersson rev. 016 Department of Electrical and Information Technology Lund University
More informationEECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 16
EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 16 Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can use
More informationESE 531: Digital Signal Processing
ESE 531: Digital Signal Processing Lec 6: January 31, 2017 Inverse z-transform Lecture Outline! z-transform " Tie up loose ends " Regions of convergence properties! Inverse z-transform " Inspection " Partial
More informationEE301 Signals and Systems In-Class Exam Exam 3 Thursday, Apr. 20, Cover Sheet
NAME: NAME EE301 Signals and Systems In-Class Exam Exam 3 Thursday, Apr. 20, 2017 Cover Sheet Test Duration: 75 minutes. Coverage: Chaps. 5,7 Open Book but Closed Notes. One 8.5 in. x 11 in. crib sheet
More informationSignals and Systems Profs. Byron Yu and Pulkit Grover Fall Midterm 2 Solutions
8-90 Signals and Systems Profs. Byron Yu and Pulkit Grover Fall 08 Midterm Solutions Name: Andrew ID: Problem Score Max 8 5 3 6 4 7 5 8 6 7 6 8 6 9 0 0 Total 00 Midterm Solutions. (8 points) Indicate whether
More informationFrequency-Domain C/S of LTI Systems
Frequency-Domain C/S of LTI Systems x(n) LTI y(n) LTI: Linear Time-Invariant system h(n), the impulse response of an LTI systems describes the time domain c/s. H(ω), the frequency response describes the
More informationDigital Signal Processing Lecture 10 - Discrete Fourier Transform
Digital Signal Processing - Discrete Fourier Transform Electrical Engineering and Computer Science University of Tennessee, Knoxville November 12, 2015 Overview 1 2 3 4 Review - 1 Introduction Discrete-time
More informationESE 531: Digital Signal Processing
ESE 531: Digital Signal Processing Lec 8: February 12th, 2019 Sampling and Reconstruction Lecture Outline! Review " Ideal sampling " Frequency response of sampled signal " Reconstruction " Anti-aliasing
More informationDigital Signal Processing I Final Exam Fall 2008 ECE Dec Cover Sheet
Digital Signal Processing I Final Exam Fall 8 ECE538 7 Dec.. 8 Cover Sheet Test Duration: minutes. Open Book but Closed Notes. Calculators NOT allowed. This test contains FIVE problems. All work should
More informationEECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 9
EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 9 Name: Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can
More informationMEDE2500 Tutorial Nov-7
(updated 2016-Nov-4,7:40pm) MEDE2500 (2016-2017) Tutorial 3 MEDE2500 Tutorial 3 2016-Nov-7 Content 1. The Dirac Delta Function, singularity functions, even and odd functions 2. The sampling process and
More informationCITY UNIVERSITY LONDON. MSc in Information Engineering DIGITAL SIGNAL PROCESSING EPM746
No: CITY UNIVERSITY LONDON MSc in Information Engineering DIGITAL SIGNAL PROCESSING EPM746 Date: 19 May 2004 Time: 09:00-11:00 Attempt Three out of FIVE questions, at least One question from PART B PART
More informationAspects of Continuous- and Discrete-Time Signals and Systems
Aspects of Continuous- and Discrete-Time Signals and Systems C.S. Ramalingam Department of Electrical Engineering IIT Madras C.S. Ramalingam (EE Dept., IIT Madras) Networks and Systems 1 / 45 Scaling the
More informationDefinition. A signal is a sequence of numbers. sequence is also referred to as being in l 1 (Z), or just in l 1. A sequence {x(n)} satisfying
Signals and Systems. Definition. A signal is a sequence of numbers {x(n)} n Z satisfying n Z x(n)
More informationChapter 5 Frequency Domain Analysis of Systems
Chapter 5 Frequency Domain Analysis of Systems CT, LTI Systems Consider the following CT LTI system: xt () ht () yt () Assumption: the impulse response h(t) is absolutely integrable, i.e., ht ( ) dt< (this
More information! z-transform. " Tie up loose ends. " Regions of convergence properties. ! Inverse z-transform. " Inspection. " Partial fraction
Lecture Outline ESE 53: Digital Signal Processing Lec 6: January 3, 207 Inverse z-transform! z-transform " Tie up loose ends " gions of convergence properties! Inverse z-transform " Inspection " Partial
More informationHomework 4. May An LTI system has an input, x(t) and output y(t) related through the equation y(t) = t e (t t ) x(t 2)dt
Homework 4 May 2017 1. An LTI system has an input, x(t) and output y(t) related through the equation y(t) = t e (t t ) x(t 2)dt Determine the impulse response of the system. Rewriting as y(t) = t e (t
More informationDigital Signal Processing. Midterm 1 Solution
EE 123 University of California, Berkeley Anant Sahai February 15, 27 Digital Signal Processing Instructions Midterm 1 Solution Total time allowed for the exam is 8 minutes Some useful formulas: Discrete
More informationNew Mexico State University Klipsch School of Electrical Engineering EE312 - Signals and Systems I Fall 2015 Final Exam
New Mexico State University Klipsch School of Electrical Engineering EE312 - Signals and Systems I Fall 2015 Name: Solve problems 1 3 and two from problems 4 7. Circle below which two of problems 4 7 you
More informationEC Signals and Systems
UNIT I CLASSIFICATION OF SIGNALS AND SYSTEMS Continuous time signals (CT signals), discrete time signals (DT signals) Step, Ramp, Pulse, Impulse, Exponential 1. Define Unit Impulse Signal [M/J 1], [M/J
More informationDiscrete Time Fourier Transform
Discrete Time Fourier Transform Recall that we wrote the sampled signal x s (t) = x(kt)δ(t kt). We calculate its Fourier Transform. We do the following: Ex. Find the Continuous Time Fourier Transform of
More informationUniversity Question Paper Solution
Unit 1: Introduction University Question Paper Solution 1. Determine whether the following systems are: i) Memoryless, ii) Stable iii) Causal iv) Linear and v) Time-invariant. i) y(n)= nx(n) ii) y(t)=
More informationNAME: ht () 1 2π. Hj0 ( ) dω Find the value of BW for the system having the following impulse response.
University of California at Berkeley Department of Electrical Engineering and Computer Sciences Professor J. M. Kahn, EECS 120, Fall 1998 Final Examination, Wednesday, December 16, 1998, 5-8 pm NAME: 1.
More informationFinal Exam of ECE301, Section 1 (Prof. Chih-Chun Wang) 1 3pm, Friday, December 13, 2016, EE 129.
Final Exam of ECE301, Section 1 (Prof. Chih-Chun Wang) 1 3pm, Friday, December 13, 2016, EE 129. 1. Please make sure that it is your name printed on the exam booklet. Enter your student ID number, and
More informationProblem Value Score No/Wrong Rec
GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING QUIZ #2 DATE: 14-Oct-11 COURSE: ECE-225 NAME: GT username: LAST, FIRST (ex: gpburdell3) 3 points 3 points 3 points Recitation
More informationReview of Fundamentals of Digital Signal Processing
Chapter 2 Review of Fundamentals of Digital Signal Processing 2.1 (a) This system is not linear (the constant term makes it non linear) but is shift-invariant (b) This system is linear but not shift-invariant
More informationEE482: Digital Signal Processing Applications
Professor Brendan Morris, SEB 3216, brendan.morris@unlv.edu EE482: Digital Signal Processing Applications Spring 2014 TTh 14:30-15:45 CBC C222 Lecture 02 DSP Fundamentals 14/01/21 http://www.ee.unlv.edu/~b1morris/ee482/
More informationEECE 2510 Circuits and Signals, Biomedical Applications Final Exam Section 3. Name:
EECE 2510 Circuits and Signals, Biomedical Applications Final Exam Section 3 Instructions: Closed book, closed notes; Computers and cell phones are not allowed Scientific calculators are allowed Complete
More informationReview of Fundamentals of Digital Signal Processing
Solution Manual for Theory and Applications of Digital Speech Processing by Lawrence Rabiner and Ronald Schafer Click here to Purchase full Solution Manual at http://solutionmanuals.info Link download
More informationLecture 3 January 23
EE 123: Digital Signal Processing Spring 2007 Lecture 3 January 23 Lecturer: Prof. Anant Sahai Scribe: Dominic Antonelli 3.1 Outline These notes cover the following topics: Eigenvectors and Eigenvalues
More informationELEG 305: Digital Signal Processing
ELEG 305: Digital Signal Processing Lecture : Design of Digital IIR Filters (Part I) Kenneth E. Barner Department of Electrical and Computer Engineering University of Delaware Fall 008 K. E. Barner (Univ.
More informationQ1 Q2 Q3 Q4 Q5 Total
EE 120: Signals & Systems Department of Electrical Engineering and Computer Sciences University of California, Berkeley Midterm Exam #1 February 29, 2016, 2:10-4:00pm Instructions: There are five questions
More informationECE503: Digital Signal Processing Lecture 5
ECE53: Digital Signal Processing Lecture 5 D. Richard Brown III WPI 3-February-22 WPI D. Richard Brown III 3-February-22 / 32 Lecture 5 Topics. Magnitude and phase characterization of transfer functions
More informationDiscrete Time Fourier Transform (DTFT)
Discrete Time Fourier Transform (DTFT) 1 Discrete Time Fourier Transform (DTFT) The DTFT is the Fourier transform of choice for analyzing infinite-length signals and systems Useful for conceptual, pencil-and-paper
More informationDigital Filters Ying Sun
Digital Filters Ying Sun Digital filters Finite impulse response (FIR filter: h[n] has a finite numbers of terms. Infinite impulse response (IIR filter: h[n] has infinite numbers of terms. Causal filter:
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science Discrete-Time Signal Processing Fall 2005
1 MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science 6.341 Discrete-Time Signal Processing Fall 2005 FINAL EXAM Friday, December 16, 2005 Walker (50-340) 1:30pm
More informationChap 4. Sampling of Continuous-Time Signals
Digital Signal Processing Chap 4. Sampling of Continuous-Time Signals Chang-Su Kim Digital Processing of Continuous-Time Signals Digital processing of a CT signal involves three basic steps 1. Conversion
More informationDiscrete Time Signals and Systems Time-frequency Analysis. Gloria Menegaz
Discrete Time Signals and Systems Time-frequency Analysis Gloria Menegaz Time-frequency Analysis Fourier transform (1D and 2D) Reference textbook: Discrete time signal processing, A.W. Oppenheim and R.W.
More informationQuiz. Good luck! Signals & Systems ( ) Number of Problems: 19. Number of Points: 19. Permitted aids:
Quiz November th, Signals & Systems (--) Prof. R. D Andrea Quiz Exam Duration: Min Number of Problems: Number of Points: Permitted aids: Important: None Questions must be answered on the provided answer
More informationUniversity of Illinois at Urbana-Champaign ECE 310: Digital Signal Processing
University of Illinois at Urbana-Champaign ECE 0: Digital Signal Processing Chandra Radhakrishnan PROBLEM SET : SOLUTIONS Peter Kairouz Problem. Hz z 7 z +/9, causal ROC z > contains the unit circle BIBO
More informationsummable Necessary and sufficient for BIBO stability of an LTI system. Also see poles.
EECS 206 DSP GLOSSARY c Andrew E. Yagle Fall 2005 absolutely impulse response: h[n] is finite. EX: n=0 ( 3 4 )n = 1 = 4 but 1 3 n=1 1 n. 4 summable Necessary and sufficient for BIBO stability of an LI
More informationComputer Engineering 4TL4: Digital Signal Processing
Computer Engineering 4TL4: Digital Signal Processing Day Class Instructor: Dr. I. C. BRUCE Duration of Examination: 3 Hours McMaster University Final Examination December, 2003 This examination paper includes
More informationQuestion Bank. UNIT 1 Part-A
FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai -625 020 An ISO 9001:2008 Certified Institution Question Bank DEPARTMENT OF ELECTRONICS AND COMMUNICATION
More informationECE 301 Fall 2010 Division 2 Homework 10 Solutions. { 1, if 2n t < 2n + 1, for any integer n, x(t) = 0, if 2n 1 t < 2n, for any integer n.
ECE 3 Fall Division Homework Solutions Problem. Reconstruction of a continuous-time signal from its samples. Consider the following periodic signal, depicted below: {, if n t < n +, for any integer n,
More informationLike bilateral Laplace transforms, ROC must be used to determine a unique inverse z-transform.
Inversion of the z-transform Focus on rational z-transform of z 1. Apply partial fraction expansion. Like bilateral Laplace transforms, ROC must be used to determine a unique inverse z-transform. Let X(z)
More information( ) John A. Quinn Lecture. ESE 531: Digital Signal Processing. Lecture Outline. Frequency Response of LTI System. Example: Zero on Real Axis
John A. Quinn Lecture ESE 531: Digital Signal Processing Lec 15: March 21, 2017 Review, Generalized Linear Phase Systems Penn ESE 531 Spring 2017 Khanna Lecture Outline!!! 2 Frequency Response of LTI System
More informationTTT4120 Digital Signal Processing Suggested Solutions for Problem Set 2
Norwegian University of Science and Technology Department of Electronics and Telecommunications TTT42 Digital Signal Processing Suggested Solutions for Problem Set 2 Problem (a) The spectrum X(ω) can be
More informationEE538 Final Exam Fall :20 pm -5:20 pm PHYS 223 Dec. 17, Cover Sheet
EE538 Final Exam Fall 005 3:0 pm -5:0 pm PHYS 3 Dec. 17, 005 Cover Sheet Test Duration: 10 minutes. Open Book but Closed Notes. Calculators ARE allowed!! This test contains five problems. Each of the five
More informationFinal Exam of ECE301, Section 3 (CRN ) 8 10am, Wednesday, December 13, 2017, Hiler Thtr.
Final Exam of ECE301, Section 3 (CRN 17101-003) 8 10am, Wednesday, December 13, 2017, Hiler Thtr. 1. Please make sure that it is your name printed on the exam booklet. Enter your student ID number, and
More information