Irreversible Processes
|
|
- Alisha Griffith
- 5 years ago
- Views:
Transcription
1 Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1
2 Irreversible Processes Entropy-increasing processes are irreversible, because the reverse processes would reduce entropy. Examples: Free-expansion (actually, any particle flow between regions of different density) Heat flow between two systems with different temperatures. Consider the four processes of interest here: Isothermal: Heat flow but no T difference. Reversible Adiabatic: Q = 0. No heat flow at all. Reversible Isochoric & Isobaric: Heat flow between different T s. Irreversible (Assuming that there are only two reservoirs.) p isotherm p adiabat p isochor p isobar V V reversible reversible irreversible irreversible V V Lecture 15, p 2
3 ACT 1 1) The entropy of a gas increases during a quasi-static isothermal expansion. What happens to the entropy of the environment? a) S env < 0 b) S env = 0 c) S env > 0 2) Consider instead the free expansion (i.e., not quasi-static) of a gas. What happens to the total entropy during this process? a) S tot < 0 b) S tot = 0 c) S tot > 0 gas vacuum Remove the barrier Lecture 15, p 3
4 1) The entropy of a gas increases during a quasi-static isothermal expansion. What happens to the entropy of the environment? a) S env < 0 b) S env = 0 c) S env > 0 Energy (heat) leaves the environment, so its entropy decreases. In fact, since the environment and gas have the same T, the two entropy changes cancel: S tot = 0. This is a reversible process. 2) Consider instead the free expansion (i.e., not quasi-static) of a gas. What happens to the total entropy during this process? a) S tot < 0 b) S tot = 0 c) S tot > 0 gas vacuum Remove the barrier Lecture 15, p 4
5 1) The entropy of a gas increases during a quasi-static isothermal expansion. What happens to the entropy of the environment? a) S env < 0 b) S env = 0 c) S env > 0 Energy (heat) leaves the environment, so its entropy decreases. In fact, since the environment and gas have the same T, the two entropy changes cancel: S tot = 0. This is a reversible process. 2) Consider instead the free expansion (i.e., not quasi-static) of a gas. What happens to the total entropy during this process? a) S tot < 0 b) S tot = 0 c) S tot > 0 There is no work or heat flow, so U gas is constant. T is constant. However, because the volume increases, so does the number of available states, and therefore S gas increases. Nothing is happening to the environment. Therefore S tot > 0. This is not a reversible process. Lecture 15, p 5
6 Review Entropy in Macroscopic Systems Traditional thermodynamic entropy: S = k lnω = kσ We want to calculate S from macrostate information (p, V, T, U, N, etc.) Start with the definition of temperature in terms of entropy: 1 σ 1 S, or kt U T U V, N V, N The entropy changes when T changes: (We re keeping V and N fixed.) ds 2 du C dt CVdT S T T T V = = = If C V is constant: T T 1 T2 dt T 2 = CV = CV ln T T T 1 1 Lecture 15, p 6
7 ACT 2 Two blocks, each with heat capacity* C = 1 J/K are initially at different temperatures, T 1 = 250 K, T 2 = 350 K. They are then placed into contact, and eventually reach a final temperature of 300 K. (Why?) What can you say about the total change in entropy S tot? a) S tot < 0 b) S tot = 0 c) S tot > 0 T 1 T 2 T f T f T 1 = 250K T 2 = 350K T f = 300 K Two masses each with heat capacity C = 1J/K* *For a solid, C = C V = C p, to good approximation, since V 0. Lecture 15, p 7
8 Two blocks, each with heat capacity* C = 1 J/K are initially at different temperatures, T 1 = 250 K, T 2 = 350 K. They are then placed into contact, and eventually reach a final temperature of 300 K. (Why?) What can you say about the total change in entropy S tot? a) S tot < 0 b) S tot = 0 c) S tot > 0 T 1 T 2 T f T f T 1 = 250K T 2 = 350K T f = 300 K Two masses each with heat capacity C = 1J/K* This is an irreversible process, so there must be a net increase in entropy. Let s calculate S: T f T f Stot = C ln + C ln T1 T = C ln + C ln = C ln = (0.028) C = J/K The positive term is slightly bigger than the negative term. *For a solid, C = C V = C p, to good approximation, because V 0. Lecture 15, p 8
9 Example Process To analyze heat engines, we need to be able to calculate U, T, W, Q, etc. for the processes that they use. How much heat is absorbed by 3 moles of helium when it expands from V i = 10 liters to V f = 20 liters and the temperature is kept at a constant 350 K? What are the initial and final pressures? Lecture 15, p 9
10 To analyze heat engines, we need to be able to calculate U, T, W, Q, etc. for the processes that they use. How much heat is absorbed by 3 moles of helium when it expands from V i = 10 liters to V f = 20 liters and the temperature is kept at a constant 350 K? What are the initial and final pressures? Q = W by The 1 st law. For an ideal gas, T = 0 U = 0. Positive Q means heat flows into the gas. W by = nrt ln(v f /V i ) = 6048 J p i = nrt/v i = Pa p f = p i /2 = Pa An expanding gas does work. Use the ideal gas law, pv = nrt Where is the heat coming from? In order to keep the gas at a constant temperature, it must be put in contact with a large object (a heat reservoir ) having that temperature. The reservoir supplies heat to the gas (or absorbs heat, if necessary) in order to keep the gas temperature constant. Very often, we will not show the reservoir in the diagram. However, whenever we talk about a system being kept at a specific temperature, a reservoir is implied. Lecture 15, p 10
11 Example Process (2) Suppose a mole of a diatomic gas, such as O 2, is compressed adiabatically so the final volume is half the initial volume. The starting state is V i = 1 liter, T i = 300 K. What are the final temperature and pressure? Lecture 15, p 11
12 Suppose a mole of a diatomic gas, such as O 2, is compressed adiabatically so the final volume is half the initial volume. The starting state is V i = 1 liter, T i = 300 K. What are the final temperature and pressure? pv = pv γ i i γ f f 7 / 2 γ = = / 2 i pf = pi V f T f V nrt V i i = Vi Vf = Pa x pv f f = = 395 K nr γ γ Equation relating p and V for adiabatic process in α-ideal gas γ is the ratio of C p /C V for our diatomic gas (=(α+1)/α). Solve for p f. We need to express it in terms of things we know. Use the ideal gas law to calculate the final temperature. T V = T V α i i α f f 1 α V i Tf = Ti = 395 K V f Alternative: Use the equation relating T and V for an adiabatic process to get the final temperature. α = 5/2 Lecture 15, p 12
13 Helpful Hints in Dealing with Engines and Fridges Sketch the process (see figures below). Define Q h and Q c and W by (or W on ) as positive and show directions of flow. Determine which Q is given. Write the First Law of Thermodynamics (FLT). We considered three configurations of Carnot cycles: T h Q h T h Q h T h Q h Q leak = Q h W by W on W on T c Q c T c Q c T c Q c Q leak = Q C Engine: We pay for Q h, we want W by. W by = Q h - Q c = εq h Carnot: ε = 1 - T c /T h This has large ε when T h - T c is large. Refrigerator: We pay for W on, we want Q c. Q c = Q h - W on = ΚW on Carnot: Κ = T c /(T h - T c ) Heat pump: We pay for W on, we want Q h. Q h = Q c + W on = ΚW on Carnot: Κ = T h /(T h - T c ) These both have large Κ when T h - T c is small. Lecture 15, p 13
14 ACT 3: Entropy Change in Heat Pump Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Engine Hot reservoir at T h Q h W 2) What is the sign of the entropy change of the cold reservoir? Q c Cold reservoir at T c a) S c < 0 b) S c = 0 c) S c > 0 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 14
15 Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 15
16 Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 Energy (heat) is leaving the cold reservoir. 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 16
17 Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 Energy (heat) is leaving the cold reservoir. 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h It s a reversible cycle, so S tot = 0. Therefore, the two entropy changes must cancel. Remember that the entropy of the engine itself does not change. Note: We ve neglected the heat leak OUT of the hot reservoir. In fact, this must equal Q h (why?). If that heat leaks directly into the cold reservior, this will be irreversible Lecture 15, p 17
18 Example: Gasoline Engine It s not really a heat engine because the input energy is via fuel injected directly into the engine, not via heat flow. There is no obvious hot reservoir. However, one can still calculate work and energy input for particular gas types. We can treat the gasoline engine as an Otto cycle: p p b p a b a c d Combustion exhaust / intake adiabats V 1 V 2 V b c and d a are nearly adiabatic processes, because the pistons move too quickly for much heat to flow. Lecture 15, p 18
19 p p b b Calculate the efficiency: c W W Q = C ( T T ) in v b a W = W W by b c d a = U U = C ( T T ) b c b c v b c = U U = C ( T T ) d a d a v d a W = C ( T T ) C ( T T ) by v b c v a d because Q = 0 b c because Q = 0 d a Wby Cv ( Tb Tc ) Cv ( Ta Td ) ( Tc Td ) ε = = = 1 Q C ( T T ) ( T T ) in v b a b a p a a adiabats d V 1 V 2 V Lecture 15, p 19
20 Write it in terms of volume instead of temperature. We know the volume of the cylinders. ( Tc Td ) ε = 1 ( T T ) T V = T V T = T ( V / V ) α α 1/ α c 2 b 1 c b 1 2 T V = T V T = T ( V / V ) α α 1/ α d 2 a 1 d a 1 2 ( Tc Td ) ( Tb Ta )( V1 / V2 ) = ( T T ) ( T T ) b a b a ε 1/ α 1/ α 1/ α 1 γ b 2 = V1 a V 1 V 2 V 2 = = = V V V V 1 γ p p b p a Compression ratio V 2 /V 1 10 γ = 1.4 (diatomic gas) ε = 60% (in reality about 30%, due to friction etc.) b a c d V 1 V 2 adiabats V Lecture 15, p 20
21 Efficiency of Otto Cycle Conmpression Ratio (V 2 /V 1 ) Monatomic Diatomic Nonlinear' Why not simply use a higher compression ratio? If V 2 big, we need a huge, heavy engine (OK for fixed installations). If V 1 small, the temperature gets too high, causing premature ignition. High compression engines need high octane gas, which has a higher combustion temperature. Lecture 15, p 21
22 Free Energy Example Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. Lecture 15, p 22
23 Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. F = U - T S, where T is the temperature of the environment. U = mc T = 1 kg * 4186 J/kg. K * 80 K = J. S = mc ln(t H2O /T env ) = 1011 J/K F = J Remember to measure temperature in Kelvin. Otherwise, you ll get the entropy wrong. Lecture 15, p 23
24 Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. If we run a Carnot engine, the efficiency at a given water temperature is: ε = 1 T cold /T hot. So, for each small decrease in water temperature, we get this much work out of the engine: dw = εq = -εmc dt Thus, the total work obtained as T drops from 100 C to 20 C is: 293 W = mc dt T 373 = ( 4186 J/K) T ( 293 K) ln = K Lecture 15, p 24
Irreversible Processes
Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1 Irreversible Processes Entropy-increasing
More informationEntropy in Macroscopic Systems
Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1 Review Entropy in Macroscopic Systems
More informationLecture 15. Available Work and Free Energy. Lecture 15, p 1
Lecture 15 Available Work and Free Energy U F F U -TS Lecture 15, p 1 Helpful Hints in Dealing with Engines and Fridges Sketch the process (see figures below). Define and Q c and W by (or W on ) as positive
More informationChapter 20. Heat Engines, Entropy and the Second Law of Thermodynamics. Dr. Armen Kocharian
Chapter 20 Heat Engines, Entropy and the Second Law of Thermodynamics Dr. Armen Kocharian First Law of Thermodynamics Review Review: The first law states that a change in internal energy in a system can
More informationWorksheet for Exploration 21.1: Engine Efficiency W Q H U
Worksheet for Exploration 21.1: Engine Efficiency In this animation, N = nr (i.e., k B = 1). This, then, gives the ideal gas law as PV = NT. Assume an ideal monatomic gas. The efficiency of an engine is
More informationPhysics 202 Homework 5
Physics 202 Homework 5 Apr 29, 2013 1. A nuclear-fueled electric power plant utilizes a so-called boiling water reac- 5.8 C tor. In this type of reactor, nuclear energy causes water under pressure to boil
More informationChapter 20 The Second Law of Thermodynamics
Chapter 20 The Second Law of Thermodynamics When we previously studied the first law of thermodynamics, we observed how conservation of energy provided us with a relationship between U, Q, and W, namely
More informationSpeed Distribution at CONSTANT Temperature is given by the Maxwell Boltzmann Speed Distribution
Temperature ~ Average KE of each particle Particles have different speeds Gas Particles are in constant RANDOM motion Average KE of each particle is: 3/2 kt Pressure is due to momentum transfer Speed Distribution
More informationReversible Processes. Furthermore, there must be no friction (i.e. mechanical energy loss) or turbulence i.e. it must be infinitely slow.
Reversible Processes A reversible thermodynamic process is one in which the universe (i.e. the system and its surroundings) can be returned to their initial conditions. Because heat only flows spontaneously
More informationHandout 12: Thermodynamics. Zeroth law of thermodynamics
1 Handout 12: Thermodynamics Zeroth law of thermodynamics When two objects with different temperature are brought into contact, heat flows from the hotter body to a cooler one Heat flows until the temperatures
More informationClassical Physics I. PHY131 Lecture 36 Entropy and the Second Law of Thermodynamics. Lecture 36 1
Classical Physics I PHY131 Lecture 36 Entropy and the Second Law of Thermodynamics Lecture 36 1 Recap: (Ir)reversible( Processes Reversible processes are processes that occur under quasi-equilibrium conditions:
More informationHandout 12: Thermodynamics. Zeroth law of thermodynamics
1 Handout 12: Thermodynamics Zeroth law of thermodynamics When two objects with different temperature are brought into contact, heat flows from the hotter body to a cooler one Heat flows until the temperatures
More informationVersion 001 HW 15 Thermodynamics C&J sizemore (21301jtsizemore) 1
Version 001 HW 15 Thermodynamics C&J sizemore 21301jtsizemore 1 This print-out should have 38 questions. Multiple-choice questions may continue on the next column or page find all choices before answering.
More informationThe first law of thermodynamics. U = internal energy. Q = amount of heat energy transfer
Thermodynamics Investigation of the energy transfer by heat and work and how natural systems behave (Q) Heat transfer of energy due to temp differences. (W) Work transfer of energy through mechanical means.
More informationThe laws of Thermodynamics. Work in thermodynamic processes
The laws of Thermodynamics ork in thermodynamic processes The work done on a gas in a cylinder is directly proportional to the force and the displacement. = F y = PA y It can be also expressed in terms
More informationS = S(f) S(i) dq rev /T. ds = dq rev /T
In 1855, Clausius proved the following (it is actually a corollary to Clausius Theorem ): If a system changes between two equilibrium states, i and f, the integral dq rev /T is the same for any reversible
More information(prev) (top) (next) (Throughout, we will assume the processes involve an ideal gas with constant n.)
1 of 9 8/22/12 9:51 PM (prev) (top) (next) Thermodynamics 1 Thermodynamic processes can be: 2 isothermal processes, ΔT = 0 (so P ~ 1 / V); isobaric processes, ΔP = 0 (so T ~ V); isovolumetric or isochoric
More informationChapter 19 The First Law of Thermodynamics
Chapter 19 The First Law of Thermodynamics The first law of thermodynamics is an extension of the principle of conservation of energy. It includes the transfer of both mechanical and thermal energy. First
More informationLecture 13 Heat Engines
Lecture 3 Heat Engines hermodynamic rocesses and entroy hermodynamic cycles Extracting work from heat - How do we define engine efficiency? - Carnot cycle: the best ossible efficiency Reading for this
More informationThe goal of thermodynamics is to understand how heat can be converted to work. Not all the heat energy can be converted to mechanical energy
Thermodynamics The goal of thermodynamics is to understand how heat can be converted to work Main lesson: Not all the heat energy can be converted to mechanical energy This is because heat energy comes
More informationIrreversible Processes
Irreversible Processes Examples: Block sliding on table comes to rest due to friction: KE converted to heat. Heat flows from hot object to cold object. Air flows into an evacuated chamber. Reverse process
More information10. Heat devices: heat engines and refrigerators (Hiroshi Matsuoka)
10 Heat devices: heat engines and refrigerators (Hiroshi Matsuoka) 1 In this chapter we will discuss how heat devices work Heat devices convert heat into work or work into heat and include heat engines
More informationDetails on the Carnot Cycle
Details on the Carnot Cycle he isothermal expansion (ab) and compression (cd): 0 ( is constant and U() is a function U isothermal of only for an Ideal Gas.) V b QH Wab nrh ln Va (ab : isothermal expansion)
More informationPhys 22: Homework 10 Solutions W A = 5W B Q IN QIN B QOUT A = 2Q OUT 2 QOUT B QIN B A = 3Q IN = QIN B QOUT. e A = W A e B W B A Q IN.
HRK 26.7 Summarizing the information given in the question One way of doing this is as follows. W A = 5W Q IN A = Q IN Q OU A = 2Q OU Use e A = W A Q IN = QIN A QOU Q IN A A A and e = W Q IN = QIN QOU
More informationDistinguish between an isothermal process and an adiabatic process as applied to an ideal gas (2)
1. This question is about thermodynamic processes. (a) Distinguish between an isothermal process and an adiabatic process as applied to an ideal gas.......... An ideal gas is held in a container by a moveable
More information5. We use the following relation derived in Sample Problem Entropy change of two blocks coming to equilibrium:
Chapter 20 5. We use the following relation derived in Sample Problem Entropy change of two blocks coming to equilibrium: Tf S = mc ln. Ti (a) The energy absorbed as heat is given by Eq. 19-14. Using Table
More informationa. 4.2x10-4 m 3 b. 5.5x10-4 m 3 c. 1.2x10-4 m 3 d. 1.4x10-5 m 3 e. 8.8x10-5 m 3
The following two problems refer to this situation: #1 A cylindrical chamber containing an ideal diatomic gas is sealed by a movable piston with cross-sectional area A = 0.0015 m 2. The volume of the chamber
More informationPhysics 101: Lecture 28 Thermodynamics II
Physics 101: Lecture 28 Thermodynamics II Final Today s lecture will cover Textbook Chapter 15.6-15.9 Check Final Exam Room Assignment! Bring ID! Be sure to check your gradebook! Physics 101: Lecture 28,
More informationLast Name: First Name ID
Last Name: First Name ID This is a set of practice problems for the final exam. It is not meant to represent every topic and is not meant to be equivalent to a 2-hour exam. These problems have not been
More informationChapter 20 Entropy and the 2nd Law of Thermodynamics
Chapter 20 Entropy and the 2nd Law of Thermodynamics A one-way processes are processes that can occur only in a certain sequence and never in the reverse sequence, like time. these one-way processes are
More informationPHYsics 1150 Homework, Chapter 14, Thermodynamics Ch 14: 1, 17, 26, 27, 37, 44, 46, 52, 58
PHYsics 1150 Homework, Chapter 14, Thermodynamics Ch 14: 1, 17, 6, 7, 37, 44, 46, 5, 58 14.1 An ideal gas is sealed in a rigid container at 5 C and. What will its temperature be when the pressure is incresed
More informationNOTE: Only CHANGE in internal energy matters
The First Law of Thermodynamics The First Law of Thermodynamics is a special case of the Law of Conservation of Energy It takes into account changes in internal energy and energy transfers by heat and
More informationChapter 12. The Laws of Thermodynamics
Chapter 12 The Laws of Thermodynamics First Law of Thermodynamics The First Law of Thermodynamics tells us that the internal energy of a system can be increased by Adding energy to the system Doing work
More informationProblem: Calculate the entropy change that results from mixing 54.0 g of water at 280 K with 27.0 g of water at 360 K in a vessel whose walls are
Problem: Calculate the entropy change that results from mixing 54.0 g of water at 280 K with 27.0 g of water at 360 K in a vessel whose walls are perfectly insulated from the surroundings. Is this a spontaneous
More informationHeat Engines and Refrigerators
Lecture 26, Dec. 1 Goals: Chapter 19 Understand the relationship between work and heat in a cycling process Follow the physics of basic heat engines and refrigerators. Recognize some practical applications
More informationSurvey of Thermodynamic Processes and First and Second Laws
Survey of Thermodynamic Processes and First and Second Laws Please select only one of the five choices, (a)-(e) for each of the 33 questions. All temperatures T are absolute temperatures. All experiments
More informationSummarizing, Key Point: An irreversible process is either spontaneous (ΔS universe > 0) or does not occur (ΔS universe < 0)
Summarizing, Key Point: An irreversible process is either spontaneous (ΔS universe > 0) or does not occur (ΔS universe < 0) Key Point: ΔS universe allows us to distinguish between reversible and irreversible
More informationFirst Law of Thermodynamics
First Law of Thermodynamics E int = Q + W other state variables E int is a state variable, so only depends on condition (P, V, T, ) of system. Therefore, E int only depends on initial and final states
More informationChapter 12. The Laws of Thermodynamics. First Law of Thermodynamics
Chapter 12 The Laws of Thermodynamics First Law of Thermodynamics The First Law of Thermodynamics tells us that the internal energy of a system can be increased by Adding energy to the system Doing work
More informationLecture 9 Examples and Problems
Lecture 9 Examples and Problems Counting microstates of combined systems Volume exchange between systems Definition of Entropy and its role in equilibrium The second law of thermodynamics Statistics of
More information(Heat capacity c is also called specific heat) this means that the heat capacity number c for water is 1 calorie/gram-k.
Lecture 23: Ideal Gas Law and The First Law of Thermodynamics 1 (REVIEW) Chapter 17: Heat Transfer Origin of the calorie unit A few hundred years ago when people were investigating heat and temperature
More information第 1 頁, 共 6 頁 Chap20 1. Test Bank, Question 5 Which of the following is NOT a state variable? Work Internal energy Entropy Temperature Pressure 2. Test Bank, Question 18 Let denote the change in entropy
More informationAdiabatic Expansion (DQ = 0)
Adiabatic Expansion (DQ = 0) Occurs if: change is made sufficiently quickly and/or with good thermal isolation. Governing formula: PV g = constant where g = C P /C V Adiabat P Isotherms V Because PV/T
More informationAljalal-Phys March 2004-Ch21-page 1. Chapter 21. Entropy and the Second Law of Thermodynamics
Aljalal-Phys.102-27 March 2004-Ch21-page 1 Chapter 21 Entropy and the Second Law of hermodynamics Aljalal-Phys.102-27 March 2004-Ch21-page 2 21-1 Some One-Way Processes Egg Ok Irreversible process Egg
More informationLecture 10: Heat Engines and Reversible Processes
Lecture 10: Heat Engines and Reversible Processes Last time we started discussing cyclic heat engines these are devices that convert heat energy into mechanical work We found that in general, heat engines
More informationln. 1 We substitute V 2 = 2.00V 1 to obtain
1. (a) Since the gas is ideal, its pressure p is given in terms of the number of moles n, the volume V, and the temperature T by p = nrt/v. The work done by the gas during the isothermal expansion is V2
More informationHow to please the rulers of NPL-213 the geese
http://www.walkingmountains. org/2015/03/reintroduction-ofthe-canada-goose/ How to please the rulers of NPL-213 the geese (Entropy and the 2 nd Law of Thermodynamics) Physics 116 2017 Tues. 3/21, Thurs
More informationChapter 19. Heat Engines
Chapter 19 Heat Engines Thermo Processes Eint = Q+ W Adiabatic No heat exchanged Q = 0 and E int = W Isobaric Constant pressure W = P (V f V i ) and E int = Q + W Isochoric Constant Volume W = 0 and E
More informationCHAPTER - 12 THERMODYNAMICS
CHAPER - HERMODYNAMICS ONE MARK QUESIONS. What is hermodynamics?. Mention the Macroscopic variables to specify the thermodynamics. 3. How does thermodynamics differ from Mechanics? 4. What is thermodynamic
More informationThe need for something else: Entropy
Lecture 27 Goals: Ch. 18 ualitatively understand 2 nd Law of Thermodynamics Ch. 19 Understand the relationship between work and heat in a cycling process Follow the physics of basic heat engines and refrigerators.
More informationHeat Engines and the Second Law of Thermodynamics
Heat Engines and the Second Law of hermodynamics here are three equivalent forms of the second law of thermodynamics; will state all three, discuss: I. (Kelvin-Planck) It is impossible to construct an
More informationLecture 13. Heat Engines. Thermodynamic processes and entropy Thermodynamic cycles Extracting work from heat
Lecture 3 Heat Engines hermodynamic rocesses and entroy hermodynamic cycles Extracting work from heat - How do we define engine efficiency? - Carnot cycle: the best ossible efficiency Reading for this
More informationPhysics 101: Lecture 28 Thermodynamics II
Physics 101: Lecture 28 Thermodynamics II Final Today s lecture will cover Textbook Chapter 15.6-15.9 Check Final Exam Room Assignment! Bring ID! Be sure to check your gradebook! Physics 101: Lecture 28,
More informationSecond Law of Thermodynamics
Dr. Alain Brizard College Physics II (PY 211) Second Law of Thermodynamics Textbook Reference: Chapter 20 sections 1-4. Second Law of Thermodynamics (Clausius) Heat flows naturally from a hot object to
More informationThe First Law of Thermodynamics
Thermodynamics The First Law of Thermodynamics Thermodynamic Processes (isobaric, isochoric, isothermal, adiabatic) Reversible and Irreversible Processes Heat Engines Refrigerators and Heat Pumps The Carnot
More information12 The Laws of Thermodynamics
June 14, 1998 12 The Laws of Thermodynamics Using Thermal Energy to do Work Understanding the laws of thermodynamics allows us to use thermal energy in a practical way. The first law of thermodynamics
More informationT s change via collisions at boundary (not mechanical interaction)
Lecture 14 Interaction of 2 systems at different temperatures Irreversible processes: 2nd Law of Thermodynamics Chapter 19: Heat Engines and Refrigerators Thermal interactions T s change via collisions
More informationLecture 5. PHYC 161 Fall 2016
Lecture 5 PHYC 161 Fall 2016 Ch. 19 First Law of Thermodynamics In a thermodynamic process, changes occur in the state of the system. Careful of signs! Q is positive when heat flows into a system. W is
More informationMinimum Bias Events at ATLAS
Camille Bélanger-Champagne McGill University Lehman College City University of New York Thermodynamics Charged Particle and Statistical Correlations Mechanics in Minimum Bias Events at ATLAS Thermodynamics
More informationLaws of Thermodynamics
Laws of Thermodynamics The Three Laws of Thermodynamics - The first lawof thermodynamics, also called conservation of energy. We can use this knowledge to determine the amount of energy in a system, the
More informationTemperature Thermal Expansion Ideal Gas Law Kinetic Theory Heat Heat Transfer Phase Changes Specific Heat Calorimetry Heat Engines
Temperature Thermal Expansion Ideal Gas Law Kinetic Theory Heat Heat Transfer Phase Changes Specific Heat Calorimetry Heat Engines Zeroeth Law Two systems individually in thermal equilibrium with a third
More informationThermodynamic system is classified into the following three systems. (ii) Closed System It exchanges only energy (not matter) with surroundings.
1 P a g e The branch of physics which deals with the study of transformation of heat energy into other forms of energy and vice-versa. A thermodynamical system is said to be in thermal equilibrium when
More informationConservation of Energy
Conservation of Energy Energy can neither by created nor destroyed, but only transferred from one system to another and transformed from one form to another. Conservation of Energy Consider at a gas in
More informationUNIVESITY OF SWAZILAND FACl.JLTY OF SCIENCE AND ENGINEERING DEPARTMENT OF PHYSICS
UNIVESITY OF SWAZILAND FACl.LTY OF SCIENCE AND ENGINEERING DEPARTMENT OF PHYSICS Main Examination 2016/2017. COURSE NAME: Thermodynamics/Thermofluids COURSE CODE: PHY242/EEE202 TIME ALLOWED: 3 hours ANSWER
More informationHeat Machines (Chapters 18.6, 19)
eat Machines (hapters 8.6, 9) eat machines eat engines eat pumps The Second Law of thermodynamics Entropy Ideal heat engines arnot cycle Other cycles: Brayton, Otto, Diesel eat Machines Description The
More informationChapter 4 - Second Law of Thermodynamics
Chapter 4 - The motive power of heat is independent of the agents employed to realize it. -Nicolas Léonard Sadi Carnot David J. Starling Penn State Hazleton Fall 2013 An irreversible process is a process
More informationMore Thermodynamics. Specific Specific Heats of a Gas Equipartition of Energy Reversible and Irreversible Processes
More Thermodynamics Specific Specific Heats of a Gas Equipartition of Energy Reversible and Irreversible Processes Carnot Cycle Efficiency of Engines Entropy More Thermodynamics 1 Specific Heat of Gases
More informationLecture Notes 2014March 13 on Thermodynamics A. First Law: based upon conservation of energy
Dr. W. Pezzaglia Physics 8C, Spring 2014 Page 1 Lecture Notes 2014March 13 on Thermodynamics A. First Law: based upon conservation of energy 1. Work 1 Dr. W. Pezzaglia Physics 8C, Spring 2014 Page 2 (c)
More informationPhysical Biochemistry. Kwan Hee Lee, Ph.D. Handong Global University
Physical Biochemistry Kwan Hee Lee, Ph.D. Handong Global University Week 3 CHAPTER 2 The Second Law: Entropy of the Universe increases What is entropy Definition: measure of disorder The greater the disorder,
More informationA) 2.0 atm B) 2.2 atm C) 2.4 atm D) 2.9 atm E) 3.3 atm
Name: Date: 1. On a cold day ( 3 C), the gauge pressure on a tire reads 2.0 atm. If the tire is heated to 27 C, what will be the absolute pressure of the air inside the tire? A) 2.0 atm B) 2.2 atm C) 2.4
More informationUniversity Physics (Prof. David Flory) Chapt_21 Monday, November 26, 2007 Page 1
University Physics (Prof. David Flory) Chapt_21 Monday, November 26, 2007 Page 1 Name: Date: 1. Let k be the Boltzmann constant. If the configuration of the molecules in a gas changes so that the multiplicity
More informationAP PHYSICS 2 WHS-CH-15 Thermodynamics Show all your work, equations used, and box in your answers!
AP PHYSICS 2 WHS-CH-15 Thermodynamics Show all your work, equations used, and box in your answers! Nicolas Léonard Sadi Carnot (1796-1832) Sadi Carnot was a French military engineer and physicist, often
More informationPhysics 115. Specific heats revisited Entropy. General Physics II. Session 13
Physics 115 General Physics II Session 13 Specific heats revisited Entropy R. J. Wilkes Email: phy115a@u.washington.edu Home page: http://courses.washington.edu/phy115a/ 4/22/14 Physics 115 1 Lecture Schedule
More informationSpeed Distribution at CONSTANT Temperature is given by the Maxwell Boltzmann Speed Distribution
Temperature ~ Average KE of each particle Particles have different speeds Gas Particles are in constant RANDOM motion Average KE of each particle is: 3/2 kt Pressure is due to momentum transfer Speed Distribution
More informationPhysics 150. Thermodynamics. Chapter 15
Physics 150 Thermodynamics Chapter 15 The First Law of Thermodynamics Let s consider an ideal gas confined in a chamber with a moveable piston If we press the piston è the gas in the chamber compresses
More informationSolutions. The cabin heat is lost by conduction through the walls. dq/dt = -KA/L ΔT = -A/R ΔT = -200 m 2 / 1.0 m 2 C /W 40 C = W
Department of Physics University of California, Berkeley Physics 7b Section 2 Spring semester 2007 Mid-term examination 1 Tuesday Feb. 20, 6:00 8:00 PM Solutions 1) (15 points) A cabin in the sierra mountains
More informationChapter 16 Thermodynamics
Nicholas J. Giordano www.cengage.com/physics/giordano Chapter 16 Thermodynamics Thermodynamics Introduction Another area of physics is thermodynamics Continues with the principle of conservation of energy
More information1. (10) Calorically perfect ideal air at 300 K, 100 kpa, 1000 m/s, is brought to rest isentropically. Determine its final temperature.
AME 5053 Intermediate Thermodynamics Examination Prof J M Powers 30 September 0 0 Calorically perfect ideal air at 300 K, 00 kpa, 000 m/s, is brought to rest isentropically Determine its final temperature
More informationPhysics 101: Lecture 28 Thermodynamics II
Physics 101: Lecture 28 Thermodynamics II Final Today s lecture will cover Textbook Chapter 15.6-15.9 Check Final Exam Room Assignment! Bring ID! Be sure to check your gradebook! (send me your net ID if
More informationPHY214 Thermal & Kinetic Physics Duration: 2 hours 30 minutes
BSc Examination by course unit. Friday 5th May 01 10:00 1:30 PHY14 Thermal & Kinetic Physics Duration: hours 30 minutes YOU ARE NOT PERMITTED TO READ THE CONTENTS OF THIS QUESTION PAPER UNTIL INSTRUCTED
More information1. Second Law of Thermodynamics
1. Second Law of hermodynamics he first law describes how the state of a system changes in response to work it performs and heat absorbed. he second law deals with direction of thermodynamic processes
More informationTHE SECOND LAW OF THERMODYNAMICS. Professor Benjamin G. Levine CEM 182H Lecture 5
THE SECOND LAW OF THERMODYNAMICS Professor Benjamin G. Levine CEM 182H Lecture 5 Chemical Equilibrium N 2 + 3 H 2 2 NH 3 Chemical reactions go in both directions Systems started from any initial state
More informationDAY 28. Summary of Primary Topics Covered. The 2 nd Law of Thermodynamics
DAY 28 Summary of Primary Topics Covered The 2 nd Law of Thermodynamics The 2 nd Law of Thermodynamics says this - - Heat energy naturally flows from hotter objects to colder objects. We know this happens,
More informationExisting Resources: Supplemental/reference for students with thermodynamics background and interests:
Existing Resources: Masters, G. (1991) Introduction to Environmental Engineering and Science (Prentice Hall: NJ), pages 15 29. [ Masters_1991_Energy.pdf] Supplemental/reference for students with thermodynamics
More informationPhysics 121, April 29, The Second Law of Thermodynamics.
Physics 121, April 29, 2008. The Second Law of Thermodynamics. http://www.horizons.uc.edu/masterjuly1998/oncampus.htm Physics 121. April 29, 2008. Course Information Topics to be discussed today: The Second
More informationHeat What is heat? Work = 2. PdV 1
eat What is heat? eat (Q) is the flow or transfer of energy from one system to another Often referred to as heat flow or heat transfer Requires that one system must be at a higher temperature than the
More information4200:225 Equilibrium Thermodynamics
4:5 Equilibrium Thermodynamics Unit I. Earth, Air, Fire, and Water Chapter 3. The Entropy Balance By J.R. Elliott, Jr. Unit I. Energy and Entropy Chapter 3. The Entropy Balance Introduction to Entropy
More informationPhysics Fall Mechanics, Thermodynamics, Waves, Fluids. Lecture 32: Heat and Work II. Slide 32-1
Physics 1501 Fall 2008 Mechanics, Thermodynamics, Waves, Fluids Lecture 32: Heat and Work II Slide 32-1 Recap: the first law of thermodynamics Two ways to raise temperature: Thermally: flow of heat Energy
More informationThermodynamics. AP Physics B
Thermodynamics AP Physics B ork done by a gas Suppose you had a piston filled with a specific amount of gas. As you add heat, the temperature rises and thus the volume of the gas expands. The gas then
More informationUNIVERSITY OF SOUTHAMPTON
UNIVERSITY OF SOUTHAMPTON PHYS1013W1 SEMESTER 2 EXAMINATION 2014-2015 ENERGY AND MATTER Duration: 120 MINS (2 hours) This paper contains 8 questions. Answers to Section A and Section B must be in separate
More informationTHERMODYNAMICS. Zeroth law of thermodynamics. Isotherm
12 THERMODYNAMICS Zeroth law of thermodynamics Two systems separately in thermal equilibrium with a third system are in thermal equilibrium with each other. Isotherm It is the graph connecting pressure
More informationPHY 206 SPRING Problem #1 NAME: SIGNATURE: UM ID: Problem #2. Problem #3. Total. Prof. Massimiliano Galeazzi. Midterm #2 March 8, 2006
PHY 06 SPRING 006 Prof. Massimiliano Galeazzi Midterm # March 8, 006 NAME: Problem # SIGNAURE: UM ID: Problem # Problem # otal Some useful relations: st lat of thermodynamic: U Q - W Heat in an isobaric
More informationEfficiency of the Carnot Cycle at Maximum Power Output. Introduction. Module 3, Lesson 2
Module 3, Lesson 2 Efficiency of the Carnot Cycle at Maximum Power Output Objective: Be the end of this lesson you will be able to identify and describe some of the basic thermodynamic processes. To facilitate
More informationChapter 20: Exercises: 3, 7, 11, 22, 28, 34 EOC: 40, 43, 46, 58
Chater 0: Exercises:, 7,,, 8, 4 EOC: 40, 4, 46, 8 E: A gasoline engine takes in.80 0 4 and delivers 800 of work er cycle. The heat is obtained by burning gasoline with a heat of combustion of 4.60 0 4.
More informationPhysics 123 Thermodynamics Review
Physics 3 Thermodynamics Review I. Definitions & Facts thermal equilibrium ideal gas thermal energy internal energy heat flow heat capacity specific heat heat of fusion heat of vaporization phase change
More informationProcess Nature of Process
AP Physics Free Response Practice Thermodynamics 1983B. The pv-diagram above represents the states of an ideal gas during one cycle of operation of a reversible heat engine. The cycle consists of the following
More informationClass 22 - Second Law of Thermodynamics and Entropy
Class 22 - Second Law of Thermodynamics and Entropy The second law of thermodynamics The first law relates heat energy, work and the internal thermal energy of a system, and is essentially a statement
More informationLecture 3 Evaluation of Entropy
Lecture 3 Evaluation of Entropy If we wish to designate S by a proper name we can say of it that it is the transformation content of the body, in the same way that we say of the quantity U that it is the
More informationName: Discussion Section:
CBE 141: Chemical Engineering Thermodynamics, Spring 2018, UC Berkeley Midterm 1 February 13, 2018 Time: 80 minutes, closed-book and closed-notes, one-sided 8 ½ x 11 equation sheet allowed Please show
More informationLecture Outline Chapter 18. Physics, 4 th Edition James S. Walker. Copyright 2010 Pearson Education, Inc.
Lecture Outline Chapter 18 Physics, 4 th Edition James S. Walker Chapter 18 The Laws of Thermodynamics Units of Chapter 18 The Zeroth Law of Thermodynamics The First Law of Thermodynamics Thermal Processes
More information