Entropy in Macroscopic Systems
|
|
- Quentin Adams
- 6 years ago
- Views:
Transcription
1 Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1
2 Review Entropy in Macroscopic Systems Traditional thermodynamic entropy: S = k lnw = ks We want to calculate S from macrostate information (p, V, T, U, N, etc.) Start with the definition of temperature in terms of entropy: 1 s 1 S, or kt U T U V, N V, N The entropy changes when T changes: (We re keeping V and N fixed.) ds 2 du C dt CVdT T T T V S If C V is constant: T T 1 T2 dt T 2 CV CV ln T T T 1 1 Lecture 15, p 2
3 ACT 1: An Irreversible Process Two blocks, each with heat capacity* C = 1 J/K are initially at different temperatures, T 1 = 250 K, T 2 = 350 K. They are then placed into contact, and eventually reach a final temperature of 300 K. (Why?) What can you say about the total change in entropy S tot? a) S tot < 0 b) S tot = 0 c) S tot > 0 T 1 T 2 T f T f T 1 = 250K T 2 = 350K T f = 300 K Two masses each with heat capacity C = 1J/K* *For a solid, C = C V = C p, to good approximation, since V 0. Lecture 15, p 3
4 Solution Two blocks, each with heat capacity* C = 1 J/K are initially at different temperatures, T 1 = 250 K, T 2 = 350 K. They are then placed into contact, and eventually reach a final temperature of 300 K. (Why?) What can you say about the total change in entropy S tot? a) S tot < 0 b) S tot = 0 c) S tot > 0 T 1 T 2 T f T f T 1 = 250K T 2 = 350K T f = 300 K Two masses each with heat capacity C = 1J/K* This is an irreversible process, so there must be a net increase in entropy. Let s calculate S: T f T f Stot C ln C ln T1 T Cln Cln Cln (0.028) C J/K The positive term is slightly bigger than the negative term. *For a solid, C = C V = C p, to good approximation, because V 0. Lecture 15, p 4
5 Example Process To analyze heat engines, we need to be able to calculate U, T, W, Q, etc. for the processes that they use. How much heat is absorbed by 3 moles of helium when it expands from V i = 10 liters to V f = 20 liters and the temperature is kept at a constant 350 K? What are the initial and final pressures? Lecture 15, p 5
6 Solution To analyze heat engines, we need to be able to calculate U, T, W, Q, etc. for the processes that they use. How much heat is absorbed by 3 moles of helium when it expands from V i = 10 liters to V f = 20 liters and the temperature is kept at a constant 350 K? What are the initial and final pressures? Q = W by The 1 st law. For an ideal gas, T = 0 U = 0. Positive Q means heat flows into the gas. W by = nrt ln(v f /V i ) = 6048 J p i = nrt/v i = Pa p f = p i /2 = Pa An expanding gas does work. Use the ideal gas law, pv = nrt Where is the heat coming from? In order to keep the gas at a constant temperature, it must be put in contact with a large object (a heat reservoir ) having that temperature. The reservoir supplies heat to the gas (or absorbs heat, if necessary) in order to keep the gas temperature constant. Very often, we will not show the reservoir in the diagram. However, whenever we talk about a system being kept at a specific temperature, a reservoir is implied. Lecture 15, p 6
7 Example Process (2) Suppose a mole of a diatomic gas, such as O 2, is compressed adiabatically so the final volume is half the initial volume. The starting state is V i = 1 liter, T i = 300 K. What are the final temperature and pressure? Lecture 15, p 7
8 Solution Suppose a mole of a diatomic gas, such as O 2, is compressed adiabatically so the final volume is half the initial volume. The starting state is V i = 1 liter, T i = 300 K. What are the final temperature and pressure? pv i i f f 7 / / 2 i pf pi V f T f p V V nrt V i i Vi Vf x10 Pa pv f f 395 K nr Equation relating p and V for adiabatic process in -ideal gas is the ratio of C p /C V for our diatomic gas (=(+1)/). Solve for p f. We need to express it in terms of things we know. Use the ideal gas law to calculate the final temperature. T V T V i i f f V i Tf Ti V f K Alternative: Use the equation relating T and V for an adiabatic process to get the final temperature. = 5/2 Lecture 15, p 8
9 Helpful Hints in Dealing with Engines and Fridges Sketch the process (see figures below). Define Q h and Q c and W by (or W on ) as positive and show directions of flow. Determine which Q is given. Write the First Law of Thermodynamics (FLT). We considered three configurations of Carnot cycles: T h T Q h T h Q h h Q h Q leak = Q h W by W on W on T c Q c T c Q c T c Q c Q leak = Q C Engine: We pay for Q h, we want W by. W by = Q h - Q c = eq h Carnot: e = 1 - T c /T h This has large e when T h - T c is large. Refrigerator: We pay for W on, we want Q c. Q c = Q h - W on = KW on Carnot: K = T c /(T h - T c ) Heat pump: We pay for W on, we want Q h. Q h = Q c + W on = KW on Carnot: K = T h /(T h - T c ) These both have large K when T h - T c is small. Lecture 15, p 9
10 ACT 2: Entropy Change in Heat Pump Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Engine Hot reservoir at T h Q h W 2) What is the sign of the entropy change of the cold reservoir? a) S c < 0 b) S c = 0 c) S c > 0 Q c Cold reservoir at T c 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 10
11 Solution Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 11
12 Solution Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 Energy (heat) is leaving the cold reservoir. 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h Lecture 15, p 12
13 Solution Consider a Carnot heat pump. 1) What is the sign of the entropy change of the hot reservoir during one cycle? a) S h < 0 b) S h = 0 c) S h > 0 Energy (heat) is entering the hot reservoir, so the number of available microstates is increasing. 2) What is the sign of the entropy change of the cold reservoir? Engine Hot reservoir at T h Q h Q c Cold reservoir at T c W a) S c < 0 b) S c = 0 c) S c > 0 Energy (heat) is leaving the cold reservoir. 3) Compare the magnitudes of the two changes. a) S c < S h b) S c = S h c) S c > S h It s a reversible cycle, so S tot = 0. Therefore, the two entropy changes must cancel. Remember that the entropy of the engine itself does not change. Lecture 15, p 13
14 Example: Gasoline Engine It s not really a heat engine because the input energy is via fuel injected directly into the engine, not via heat flow. There is no obvious hot reservoir. However, one can still calculate work and energy input for particular gas types. We can treat the gasoline engine as an Otto cycle: p b Combustion p b exhaust / intake p a a c adiabats d V 1 V 2 V bc and da are nearly adiabatic processes, because the pistons move too quickly for much heat to flow. Lecture 15, p 14
15 Solution p p b b Calculate the efficiency: Q C ( T T ) in v b a W W W by bc d a W U U C ( T T ) bc b c v b c W U U C ( T T ) d a d a v d a W C ( T T ) C ( T T ) by v b c v a d because Q 0 bc because Q 0 da Wby Cv ( Tb Tc ) Cv ( Ta Td ) ( Tc Td ) e 1 Q C ( T T ) ( T T ) in v b a b a p a c a adiabats d V 1 V 2 V Lecture 15, p 15
16 Solution Write it in terms of volume instead of temperature. We know the volume of the cylinders. ( Tc Td) e 1 ( T T ) T V T V T T ( V / V ) 1/ c 2 b 1 c b 1 2 T V T V T T ( V / V ) 1/ d 2 a 1 d a 1 2 ( Tc Td ) ( Tb Ta )( V1/ V2) ( T T ) ( T T ) b a b a b 1/ 1/ 1/ V e 1 V 2 1 a V 1 V 2 V 2 V V V 1 p p b p a Compression ratio V 2 /V 1 10 = 1.4 (diatomic gas) e = 60% (in reality about 30%, due to friction etc.) b a c d V 1 V 2 adiabats V Lecture 15, p 16
17 Efficiency of Otto Cycle Solution Conmpression Ratio (V 2 /V 1 ) Monatomic Diatomic Nonlinear' Why not simply use a higher compression ratio? If V 2 big, we need a huge, heavy engine (OK for fixed installations). If V 1 small, the temperature gets too high, causing premature ignition. High compression engines need high octane gas, which has a higher combustion temperature. Lecture 15, p 17
18 Free Energy Example Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. Lecture 15, p 18
19 Solution Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. F = U - TS, where T is the temperature of the environment. U = mct = 1 kg * 4186 J/kg. K * 80 K = J. S = mc ln(t H2O /T env ) = 1011 J/K F = J Remember to measure temperature in Kelvin. Otherwise, you ll get the entropy wrong. Lecture 15, p 19
20 Solution Suppose we have a liter of water at T = 100 C. What is its free energy, if the environment is T = 20 C? Verify the result by calculating the amount of work we could obtain. Remember that c H2O = 4186 J/kg. K. If we run a Carnot engine, the efficiency at a given water temperature is: E(T) = 1 - T/T env. So, for each small decrease in water temperature, we get this much work out of the engine: dw = eq = -emc dt Thus, the total work obtained as T drops from 100 C to 20 C is: W mc 1 dt T J/K T 293 Kln K Lecture 15, p 20
21 Beware!!! Maximum S tot Does Not Always Mean Minimum F sys When we introduced the Helmholtz free energy, F, last lecture (see the hot brick discussion), we assumed that the volume of the brick was constant. If the volume weren t constant, then the brick could gain or lose energy (and entropy) by contracting or expanding. That would change the analysis. It is very common that the pressure, not the volume, is constant (e.g., if our system is a gas at constant atmospheric pressure). In this situation, we use a different form of free energy, called Gibbs free energy : G = U+pV-TS. The pv term takes into account the work that is done during volume changes. We won t use Gibbs free energy in this course, but it important to be aware that the calculation of free energy depends on the situation. Lecture 15, p 21
22 Supplement: Gibbs Free Energy Most phase transitions are observed under constant p,t conditions, not constant-v,t. Unless the stuff is in a closed vessel, it s open to the air (thus, at atmospheric pressure). In this case, the entropy of the environment changes not only when the system energy changes but also when its volume changes. The reservoir is (by assumption) in equilibrium at fixed T and p. So, as heat flows, the change of the reservoir s entropy is: Q U pv U pv T T T R R R SR V R = -V and U R = -U because total volume and total energy are constant. The change in the total entropy is thus: U pv ( U pv TS) G Stot S SR S T T T T where: G U pv TS Variables U, V, and S are of the system. Fixed p and T are of the reservoir. In these conditions, maximizing S tot means minimizing the system s G. Lecture 15, p 22
Irreversible Processes
Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1 Irreversible Processes Entropy-increasing
More informationIrreversible Processes
Lecture 15 Heat Engines Review & Examples p p b b Hot reservoir at T h p a a c adiabats Heat leak Heat pump Q h Q c W d V 1 V 2 V Cold reservoir at T c Lecture 15, p 1 Irreversible Processes Entropy-increasing
More informationLecture 15. Available Work and Free Energy. Lecture 15, p 1
Lecture 15 Available Work and Free Energy U F F U -TS Lecture 15, p 1 Helpful Hints in Dealing with Engines and Fridges Sketch the process (see figures below). Define and Q c and W by (or W on ) as positive
More informationChapter 20. Heat Engines, Entropy and the Second Law of Thermodynamics. Dr. Armen Kocharian
Chapter 20 Heat Engines, Entropy and the Second Law of Thermodynamics Dr. Armen Kocharian First Law of Thermodynamics Review Review: The first law states that a change in internal energy in a system can
More information5. We use the following relation derived in Sample Problem Entropy change of two blocks coming to equilibrium:
Chapter 20 5. We use the following relation derived in Sample Problem Entropy change of two blocks coming to equilibrium: Tf S = mc ln. Ti (a) The energy absorbed as heat is given by Eq. 19-14. Using Table
More informationVersion 001 HW 15 Thermodynamics C&J sizemore (21301jtsizemore) 1
Version 001 HW 15 Thermodynamics C&J sizemore 21301jtsizemore 1 This print-out should have 38 questions. Multiple-choice questions may continue on the next column or page find all choices before answering.
More informationChapter 20 The Second Law of Thermodynamics
Chapter 20 The Second Law of Thermodynamics When we previously studied the first law of thermodynamics, we observed how conservation of energy provided us with a relationship between U, Q, and W, namely
More informationSpeed Distribution at CONSTANT Temperature is given by the Maxwell Boltzmann Speed Distribution
Temperature ~ Average KE of each particle Particles have different speeds Gas Particles are in constant RANDOM motion Average KE of each particle is: 3/2 kt Pressure is due to momentum transfer Speed Distribution
More informationHandout 12: Thermodynamics. Zeroth law of thermodynamics
1 Handout 12: Thermodynamics Zeroth law of thermodynamics When two objects with different temperature are brought into contact, heat flows from the hotter body to a cooler one Heat flows until the temperatures
More informationS = S(f) S(i) dq rev /T. ds = dq rev /T
In 1855, Clausius proved the following (it is actually a corollary to Clausius Theorem ): If a system changes between two equilibrium states, i and f, the integral dq rev /T is the same for any reversible
More informationReversible Processes. Furthermore, there must be no friction (i.e. mechanical energy loss) or turbulence i.e. it must be infinitely slow.
Reversible Processes A reversible thermodynamic process is one in which the universe (i.e. the system and its surroundings) can be returned to their initial conditions. Because heat only flows spontaneously
More informationLast Name: First Name ID
Last Name: First Name ID This is a set of practice problems for the final exam. It is not meant to represent every topic and is not meant to be equivalent to a 2-hour exam. These problems have not been
More informationDetails on the Carnot Cycle
Details on the Carnot Cycle he isothermal expansion (ab) and compression (cd): 0 ( is constant and U() is a function U isothermal of only for an Ideal Gas.) V b QH Wab nrh ln Va (ab : isothermal expansion)
More informationHandout 12: Thermodynamics. Zeroth law of thermodynamics
1 Handout 12: Thermodynamics Zeroth law of thermodynamics When two objects with different temperature are brought into contact, heat flows from the hotter body to a cooler one Heat flows until the temperatures
More informationWorksheet for Exploration 21.1: Engine Efficiency W Q H U
Worksheet for Exploration 21.1: Engine Efficiency In this animation, N = nr (i.e., k B = 1). This, then, gives the ideal gas law as PV = NT. Assume an ideal monatomic gas. The efficiency of an engine is
More informationChapter 20 Entropy and the 2nd Law of Thermodynamics
Chapter 20 Entropy and the 2nd Law of Thermodynamics A one-way processes are processes that can occur only in a certain sequence and never in the reverse sequence, like time. these one-way processes are
More informationHeat Engines and Refrigerators
Lecture 26, Dec. 1 Goals: Chapter 19 Understand the relationship between work and heat in a cycling process Follow the physics of basic heat engines and refrigerators. Recognize some practical applications
More informationThe first law of thermodynamics. U = internal energy. Q = amount of heat energy transfer
Thermodynamics Investigation of the energy transfer by heat and work and how natural systems behave (Q) Heat transfer of energy due to temp differences. (W) Work transfer of energy through mechanical means.
More informationIrreversible Processes
Irreversible Processes Examples: Block sliding on table comes to rest due to friction: KE converted to heat. Heat flows from hot object to cold object. Air flows into an evacuated chamber. Reverse process
More informationln. 1 We substitute V 2 = 2.00V 1 to obtain
1. (a) Since the gas is ideal, its pressure p is given in terms of the number of moles n, the volume V, and the temperature T by p = nrt/v. The work done by the gas during the isothermal expansion is V2
More informationPhysics 202 Homework 5
Physics 202 Homework 5 Apr 29, 2013 1. A nuclear-fueled electric power plant utilizes a so-called boiling water reac- 5.8 C tor. In this type of reactor, nuclear energy causes water under pressure to boil
More informationClassical Physics I. PHY131 Lecture 36 Entropy and the Second Law of Thermodynamics. Lecture 36 1
Classical Physics I PHY131 Lecture 36 Entropy and the Second Law of Thermodynamics Lecture 36 1 Recap: (Ir)reversible( Processes Reversible processes are processes that occur under quasi-equilibrium conditions:
More informationThe need for something else: Entropy
Lecture 27 Goals: Ch. 18 ualitatively understand 2 nd Law of Thermodynamics Ch. 19 Understand the relationship between work and heat in a cycling process Follow the physics of basic heat engines and refrigerators.
More informationa. 4.2x10-4 m 3 b. 5.5x10-4 m 3 c. 1.2x10-4 m 3 d. 1.4x10-5 m 3 e. 8.8x10-5 m 3
The following two problems refer to this situation: #1 A cylindrical chamber containing an ideal diatomic gas is sealed by a movable piston with cross-sectional area A = 0.0015 m 2. The volume of the chamber
More informationUNIVESITY OF SWAZILAND FACl.JLTY OF SCIENCE AND ENGINEERING DEPARTMENT OF PHYSICS
UNIVESITY OF SWAZILAND FACl.LTY OF SCIENCE AND ENGINEERING DEPARTMENT OF PHYSICS Main Examination 2016/2017. COURSE NAME: Thermodynamics/Thermofluids COURSE CODE: PHY242/EEE202 TIME ALLOWED: 3 hours ANSWER
More information(Heat capacity c is also called specific heat) this means that the heat capacity number c for water is 1 calorie/gram-k.
Lecture 23: Ideal Gas Law and The First Law of Thermodynamics 1 (REVIEW) Chapter 17: Heat Transfer Origin of the calorie unit A few hundred years ago when people were investigating heat and temperature
More informationProblem: Calculate the entropy change that results from mixing 54.0 g of water at 280 K with 27.0 g of water at 360 K in a vessel whose walls are
Problem: Calculate the entropy change that results from mixing 54.0 g of water at 280 K with 27.0 g of water at 360 K in a vessel whose walls are perfectly insulated from the surroundings. Is this a spontaneous
More informationPhys 22: Homework 10 Solutions W A = 5W B Q IN QIN B QOUT A = 2Q OUT 2 QOUT B QIN B A = 3Q IN = QIN B QOUT. e A = W A e B W B A Q IN.
HRK 26.7 Summarizing the information given in the question One way of doing this is as follows. W A = 5W Q IN A = Q IN Q OU A = 2Q OU Use e A = W A Q IN = QIN A QOU Q IN A A A and e = W Q IN = QIN QOU
More information12 The Laws of Thermodynamics
June 14, 1998 12 The Laws of Thermodynamics Using Thermal Energy to do Work Understanding the laws of thermodynamics allows us to use thermal energy in a practical way. The first law of thermodynamics
More informationChapter 20: Exercises: 3, 7, 11, 22, 28, 34 EOC: 40, 43, 46, 58
Chater 0: Exercises:, 7,,, 8, 4 EOC: 40, 4, 46, 8 E: A gasoline engine takes in.80 0 4 and delivers 800 of work er cycle. The heat is obtained by burning gasoline with a heat of combustion of 4.60 0 4.
More informationLaws of Thermodynamics
Laws of Thermodynamics The Three Laws of Thermodynamics - The first lawof thermodynamics, also called conservation of energy. We can use this knowledge to determine the amount of energy in a system, the
More informationAdiabatic Expansion (DQ = 0)
Adiabatic Expansion (DQ = 0) Occurs if: change is made sufficiently quickly and/or with good thermal isolation. Governing formula: PV g = constant where g = C P /C V Adiabat P Isotherms V Because PV/T
More informationHeat Engines and the Second Law of Thermodynamics
Heat Engines and the Second Law of hermodynamics here are three equivalent forms of the second law of thermodynamics; will state all three, discuss: I. (Kelvin-Planck) It is impossible to construct an
More informationChapter 12. The Laws of Thermodynamics
Chapter 12 The Laws of Thermodynamics First Law of Thermodynamics The First Law of Thermodynamics tells us that the internal energy of a system can be increased by Adding energy to the system Doing work
More informationSummarizing, Key Point: An irreversible process is either spontaneous (ΔS universe > 0) or does not occur (ΔS universe < 0)
Summarizing, Key Point: An irreversible process is either spontaneous (ΔS universe > 0) or does not occur (ΔS universe < 0) Key Point: ΔS universe allows us to distinguish between reversible and irreversible
More informationPhysics 101: Lecture 28 Thermodynamics II
Physics 101: Lecture 28 Thermodynamics II Final Today s lecture will cover Textbook Chapter 15.6-15.9 Check Final Exam Room Assignment! Bring ID! Be sure to check your gradebook! Physics 101: Lecture 28,
More informationThe laws of Thermodynamics. Work in thermodynamic processes
The laws of Thermodynamics ork in thermodynamic processes The work done on a gas in a cylinder is directly proportional to the force and the displacement. = F y = PA y It can be also expressed in terms
More informationChapter 19 The First Law of Thermodynamics
Chapter 19 The First Law of Thermodynamics The first law of thermodynamics is an extension of the principle of conservation of energy. It includes the transfer of both mechanical and thermal energy. First
More informationClass 22 - Second Law of Thermodynamics and Entropy
Class 22 - Second Law of Thermodynamics and Entropy The second law of thermodynamics The first law relates heat energy, work and the internal thermal energy of a system, and is essentially a statement
More informationMinimum Bias Events at ATLAS
Camille Bélanger-Champagne McGill University Lehman College City University of New York Thermodynamics Charged Particle and Statistical Correlations Mechanics in Minimum Bias Events at ATLAS Thermodynamics
More informationHow to please the rulers of NPL-213 the geese
http://www.walkingmountains. org/2015/03/reintroduction-ofthe-canada-goose/ How to please the rulers of NPL-213 the geese (Entropy and the 2 nd Law of Thermodynamics) Physics 116 2017 Tues. 3/21, Thurs
More informationAljalal-Phys March 2004-Ch21-page 1. Chapter 21. Entropy and the Second Law of Thermodynamics
Aljalal-Phys.102-27 March 2004-Ch21-page 1 Chapter 21 Entropy and the Second Law of hermodynamics Aljalal-Phys.102-27 March 2004-Ch21-page 2 21-1 Some One-Way Processes Egg Ok Irreversible process Egg
More information4200:225 Equilibrium Thermodynamics
4:5 Equilibrium Thermodynamics Unit I. Earth, Air, Fire, and Water Chapter 3. The Entropy Balance By J.R. Elliott, Jr. Unit I. Energy and Entropy Chapter 3. The Entropy Balance Introduction to Entropy
More information第 1 頁, 共 6 頁 Chap20 1. Test Bank, Question 5 Which of the following is NOT a state variable? Work Internal energy Entropy Temperature Pressure 2. Test Bank, Question 18 Let denote the change in entropy
More informationSecond Law of Thermodynamics
Dr. Alain Brizard College Physics II (PY 211) Second Law of Thermodynamics Textbook Reference: Chapter 20 sections 1-4. Second Law of Thermodynamics (Clausius) Heat flows naturally from a hot object to
More informationLecture Notes 2014March 13 on Thermodynamics A. First Law: based upon conservation of energy
Dr. W. Pezzaglia Physics 8C, Spring 2014 Page 1 Lecture Notes 2014March 13 on Thermodynamics A. First Law: based upon conservation of energy 1. Work 1 Dr. W. Pezzaglia Physics 8C, Spring 2014 Page 2 (c)
More informationLecture 10: Heat Engines and Reversible Processes
Lecture 10: Heat Engines and Reversible Processes Last time we started discussing cyclic heat engines these are devices that convert heat energy into mechanical work We found that in general, heat engines
More informationPHY214 Thermal & Kinetic Physics Duration: 2 hours 30 minutes
BSc Examination by course unit. Friday 5th May 01 10:00 1:30 PHY14 Thermal & Kinetic Physics Duration: hours 30 minutes YOU ARE NOT PERMITTED TO READ THE CONTENTS OF THIS QUESTION PAPER UNTIL INSTRUCTED
More informationPhysics 123 Thermodynamics Review
Physics 3 Thermodynamics Review I. Definitions & Facts thermal equilibrium ideal gas thermal energy internal energy heat flow heat capacity specific heat heat of fusion heat of vaporization phase change
More informationPhysical Biochemistry. Kwan Hee Lee, Ph.D. Handong Global University
Physical Biochemistry Kwan Hee Lee, Ph.D. Handong Global University Week 3 CHAPTER 2 The Second Law: Entropy of the Universe increases What is entropy Definition: measure of disorder The greater the disorder,
More information10. Heat devices: heat engines and refrigerators (Hiroshi Matsuoka)
10 Heat devices: heat engines and refrigerators (Hiroshi Matsuoka) 1 In this chapter we will discuss how heat devices work Heat devices convert heat into work or work into heat and include heat engines
More informationLecture 9. Heat engines. Pre-reading: 20.2
Lecture 9 Heat engines Pre-reading: 20.2 Review Second law when all systems taking part in a process are included, the entropy remains constant or increases. No process is possible in which the total entropy
More information1985B4. A kilogram sample of a material is initially a solid at a temperature of 20 C. Heat is added to the sample at a constant rate of 100
1985B4. A 0.020-kilogram sample of a material is initially a solid at a temperature of 20 C. Heat is added to the sample at a constant rate of 100 joules per second until the temperature increases to 60
More informationUNIVERSITY OF SOUTHAMPTON
UNIVERSITY OF SOUTHAMPTON PHYS1013W1 SEMESTER 2 EXAMINATION 2014-2015 ENERGY AND MATTER Duration: 120 MINS (2 hours) This paper contains 8 questions. Answers to Section A and Section B must be in separate
More informationProcess Nature of Process
AP Physics Free Response Practice Thermodynamics 1983B. The pv-diagram above represents the states of an ideal gas during one cycle of operation of a reversible heat engine. The cycle consists of the following
More informationChapter 19. Heat Engines
Chapter 19 Heat Engines Thermo Processes Eint = Q+ W Adiabatic No heat exchanged Q = 0 and E int = W Isobaric Constant pressure W = P (V f V i ) and E int = Q + W Isochoric Constant Volume W = 0 and E
More information11/29/2017 IRREVERSIBLE PROCESSES. UNIT 2 Thermodynamics: Laws of thermodynamics, ideal gases, and kinetic theory
11/9/017 AP PHYSICS UNIT Thermodynamics: Laws of thermodynamics, ideal gases, and kinetic theory CHAPTER 13 SECOND LAW OF THERMODYNAMICS IRREVERSIBLE PROCESSES The U G of the water-earth system at the
More informationC e. Negative. In a clockwise cycle, the work done on the gas is negative. Or for the cycle Qnet = +600 J and U = 0 so W = Q = 600 J
AP Physics Free Response Practice Thermodynamics ANSWERS 1983B4 Since T is constant, pbv B = p 0 V 0 and V B = 2V 0 gives p B = ½ p0 U = Q + W, since AB is isothermal, U = 0 and W = Q = 1000 J c. The entropy
More informationProblem 4 (a) This process is irreversible because it does not occur though a set of equilibrium states. (b) The heat released by the meteor is Q = mc T. To calculate the entropy of an irreversible process
More informationThe goal of thermodynamics is to understand how heat can be converted to work. Not all the heat energy can be converted to mechanical energy
Thermodynamics The goal of thermodynamics is to understand how heat can be converted to work Main lesson: Not all the heat energy can be converted to mechanical energy This is because heat energy comes
More informationChapter 4 - Second Law of Thermodynamics
Chapter 4 - The motive power of heat is independent of the agents employed to realize it. -Nicolas Léonard Sadi Carnot David J. Starling Penn State Hazleton Fall 2013 An irreversible process is a process
More informationLecture 9 Examples and Problems
Lecture 9 Examples and Problems Counting microstates of combined systems Volume exchange between systems Definition of Entropy and its role in equilibrium The second law of thermodynamics Statistics of
More informationChapter 12. The Laws of Thermodynamics. First Law of Thermodynamics
Chapter 12 The Laws of Thermodynamics First Law of Thermodynamics The First Law of Thermodynamics tells us that the internal energy of a system can be increased by Adding energy to the system Doing work
More informationTemperature Thermal Expansion Ideal Gas Law Kinetic Theory Heat Heat Transfer Phase Changes Specific Heat Calorimetry Heat Engines
Temperature Thermal Expansion Ideal Gas Law Kinetic Theory Heat Heat Transfer Phase Changes Specific Heat Calorimetry Heat Engines Zeroeth Law Two systems individually in thermal equilibrium with a third
More informationThe First Law of Thermodynamics
Thermodynamics The First Law of Thermodynamics Thermodynamic Processes (isobaric, isochoric, isothermal, adiabatic) Reversible and Irreversible Processes Heat Engines Refrigerators and Heat Pumps The Carnot
More informationPhysics 101: Lecture 28 Thermodynamics II
Physics 101: Lecture 28 Thermodynamics II Final Today s lecture will cover Textbook Chapter 15.6-15.9 Check Final Exam Room Assignment! Bring ID! Be sure to check your gradebook! Physics 101: Lecture 28,
More informationHeat Machines (Chapters 18.6, 19)
eat Machines (hapters 8.6, 9) eat machines eat engines eat pumps The Second Law of thermodynamics Entropy Ideal heat engines arnot cycle Other cycles: Brayton, Otto, Diesel eat Machines Description The
More information18.13 Review & Summary
5/2/10 10:04 PM Print this page 18.13 Review & Summary Temperature; Thermometers Temperature is an SI base quantity related to our sense of hot and cold. It is measured with a thermometer, which contains
More informationFirst Law of Thermodynamics
First Law of Thermodynamics E int = Q + W other state variables E int is a state variable, so only depends on condition (P, V, T, ) of system. Therefore, E int only depends on initial and final states
More informationOutline Review Example Problem 1. Thermodynamics. Review and Example Problems: Part-2. X Bai. SDSMT, Physics. Fall 2014
Review and Example Problems: Part- SDSMT, Physics Fall 014 1 Review Example Problem 1 Exponents of phase transformation : contents 1 Basic Concepts: Temperature, Work, Energy, Thermal systems, Ideal Gas,
More informationTHE SECOND LAW OF THERMODYNAMICS. Professor Benjamin G. Levine CEM 182H Lecture 5
THE SECOND LAW OF THERMODYNAMICS Professor Benjamin G. Levine CEM 182H Lecture 5 Chemical Equilibrium N 2 + 3 H 2 2 NH 3 Chemical reactions go in both directions Systems started from any initial state
More information8.21 The Physics of Energy Fall 2009
MIT OpenCourseWare http://ocw.mit.edu 8.21 The Physics of Energy Fall 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. 8.21 Lecture 9 Heat Engines
More informationPhysics 121, April 29, The Second Law of Thermodynamics.
Physics 121, April 29, 2008. The Second Law of Thermodynamics. http://www.horizons.uc.edu/masterjuly1998/oncampus.htm Physics 121. April 29, 2008. Course Information Topics to be discussed today: The Second
More informationPhysics Fall Mechanics, Thermodynamics, Waves, Fluids. Lecture 32: Heat and Work II. Slide 32-1
Physics 1501 Fall 2008 Mechanics, Thermodynamics, Waves, Fluids Lecture 32: Heat and Work II Slide 32-1 Recap: the first law of thermodynamics Two ways to raise temperature: Thermally: flow of heat Energy
More informationChapter 11 Heat Engines and The Second Law of Thermodynamics
Chapter 11 Heat Engines and The Second Law of Thermodynamics Heat Engines Heat engines use a temperature difference involving a high temperature (T H ) and a low temperature (T C ) to do mechanical work.
More informationPhysics 231. Topic 14: Laws of Thermodynamics. Alex Brown Dec MSU Physics 231 Fall
Physics 231 Topic 14: Laws of Thermodynamics Alex Brown Dec 7-11 2015 MSU Physics 231 Fall 2015 1 8 th 10 pm correction for 3 rd exam 9 th 10 pm attitude survey (1% for participation) 10 th 10 pm concept
More informationUNIVERSITY OF SOUTHAMPTON
UNIVERSITY OF SOUTHAMPTON PHYS1013W1 SEMESTER 2 EXAMINATION 2014-2015 ENERGY AND MATTER Duration: 120 MINS (2 hours) This paper contains 8 questions. Answers to Section A and Section B must be in separate
More information(prev) (top) (next) (Throughout, we will assume the processes involve an ideal gas with constant n.)
1 of 9 8/22/12 9:51 PM (prev) (top) (next) Thermodynamics 1 Thermodynamic processes can be: 2 isothermal processes, ΔT = 0 (so P ~ 1 / V); isobaric processes, ΔP = 0 (so T ~ V); isovolumetric or isochoric
More informationT ice T water T water = T ice =0 0 C. e =1
Given 1 kg of water at 100 0 C and a very large (very very large) block of ice at 0 0 C. A reversible heat engine absorbs heat from the water and expels heat to the ice until work can no longer be extracted
More informationOutline Review Example Problem 1 Example Problem 2. Thermodynamics. Review and Example Problems. X Bai. SDSMT, Physics. Fall 2013
Review and Example Problems SDSMT, Physics Fall 013 1 Review Example Problem 1 Exponents of phase transformation 3 Example Problem Application of Thermodynamic Identity : contents 1 Basic Concepts: Temperature,
More informationDistinguish between an isothermal process and an adiabatic process as applied to an ideal gas (2)
1. This question is about thermodynamic processes. (a) Distinguish between an isothermal process and an adiabatic process as applied to an ideal gas.......... An ideal gas is held in a container by a moveable
More informationConservation of Energy
Conservation of Energy Energy can neither by created nor destroyed, but only transferred from one system to another and transformed from one form to another. Conservation of Energy Consider at a gas in
More information1. Second Law of Thermodynamics
1. Second Law of hermodynamics he first law describes how the state of a system changes in response to work it performs and heat absorbed. he second law deals with direction of thermodynamic processes
More informationChapter 20 Second Law of Thermodynamics. Copyright 2009 Pearson Education, Inc.
Chapter 20 Second Law of Thermodynamics It is easy to produce thermal energy using work, but how does one produce work using thermal energy? This is a heat engine; mechanical energy can be obtained from
More informationA) 2.0 atm B) 2.2 atm C) 2.4 atm D) 2.9 atm E) 3.3 atm
Name: Date: 1. On a cold day ( 3 C), the gauge pressure on a tire reads 2.0 atm. If the tire is heated to 27 C, what will be the absolute pressure of the air inside the tire? A) 2.0 atm B) 2.2 atm C) 2.4
More informationPhysics 123 Unit #2 Review
Physics 123 Unit #2 Review I. Definitions & Facts thermal equilibrium ideal gas thermal energy internal energy heat flow heat capacity specific heat heat of fusion heat of vaporization phase change expansion
More informationUniversity Physics (Prof. David Flory) Chapt_21 Monday, November 26, 2007 Page 1
University Physics (Prof. David Flory) Chapt_21 Monday, November 26, 2007 Page 1 Name: Date: 1. Let k be the Boltzmann constant. If the configuration of the molecules in a gas changes so that the multiplicity
More information(a) How much work is done by the gas? (b) Assuming the gas behaves as an ideal gas, what is the final temperature? V γ+1 2 V γ+1 ) pdv = K 1 γ + 1
P340: hermodynamics and Statistical Physics, Exam#, Solution. (0 point) When gasoline explodes in an automobile cylinder, the temperature is about 2000 K, the pressure is is 8.0 0 5 Pa, and the volume
More informationAP PHYSICS 2 WHS-CH-15 Thermodynamics Show all your work, equations used, and box in your answers!
AP PHYSICS 2 WHS-CH-15 Thermodynamics Show all your work, equations used, and box in your answers! Nicolas Léonard Sadi Carnot (1796-1832) Sadi Carnot was a French military engineer and physicist, often
More information4. All questions are NOT ofequal value. Marks available for each question are shown in the examination paper.
THE UNIVERSITY OF NEW SOUTH WALES SCHOOL OF PHYSICS \1111~11\llllllllllllftllll~flrllllllllll\11111111111111111 >014407892 PHYS2060 THER1\1AL PHYSICS FINAL EXAMINATION SESSION 2 - NOVEMBER 2010 I. Time
More informationT s change via collisions at boundary (not mechanical interaction)
Lecture 14 Interaction of 2 systems at different temperatures Irreversible processes: 2nd Law of Thermodynamics Chapter 19: Heat Engines and Refrigerators Thermal interactions T s change via collisions
More informationChapter 3. The Second Law Fall Semester Physical Chemistry 1 (CHM2201)
Chapter 3. The Second Law 2011 Fall Semester Physical Chemistry 1 (CHM2201) Contents The direction of spontaneous change 3.1 The dispersal of energy 3.2 The entropy 3.3 Entropy changes accompanying specific
More informationThermodynamic system is classified into the following three systems. (ii) Closed System It exchanges only energy (not matter) with surroundings.
1 P a g e The branch of physics which deals with the study of transformation of heat energy into other forms of energy and vice-versa. A thermodynamical system is said to be in thermal equilibrium when
More informationSolutions. The cabin heat is lost by conduction through the walls. dq/dt = -KA/L ΔT = -A/R ΔT = -200 m 2 / 1.0 m 2 C /W 40 C = W
Department of Physics University of California, Berkeley Physics 7b Section 2 Spring semester 2007 Mid-term examination 1 Tuesday Feb. 20, 6:00 8:00 PM Solutions 1) (15 points) A cabin in the sierra mountains
More informationLecture 2.7 Entropy and the Second law of Thermodynamics During last several lectures we have been talking about different thermodynamic processes.
ecture 2.7 Entropy and the Second law of hermodynamics During last several lectures we have been talking about different thermodynamic processes. In particular, we have discussed heat transfer between
More informationTHERMODINAMICS. Tóth Mónika
THERMODINAMICS Tóth Mónika 2014 monika.a.toth@aok.pte.hu Temperature Temperature: is related to the average energy of the motion of the particles of an object or system. Different temperature scales. Thermometer
More informationDownloaded from
Chapter 12 (Thermodynamics) Multiple Choice Questions Single Correct Answer Type Q1. An ideal gas undergoes four different processes from the same initial state (figure). Four processes are adiabatic,
More informationSurvey of Thermodynamic Processes and First and Second Laws
Survey of Thermodynamic Processes and First and Second Laws Please select only one of the five choices, (a)-(e) for each of the 33 questions. All temperatures T are absolute temperatures. All experiments
More informationwhere R = universal gas constant R = PV/nT R = atm L mol R = atm dm 3 mol 1 K 1 R = J mol 1 K 1 (SI unit)
Ideal Gas Law PV = nrt where R = universal gas constant R = PV/nT R = 0.0821 atm L mol 1 K 1 R = 0.0821 atm dm 3 mol 1 K 1 R = 8.314 J mol 1 K 1 (SI unit) Standard molar volume = 22.4 L mol 1 at 0 C and
More informationName: Discussion Section:
CBE 141: Chemical Engineering Thermodynamics, Spring 2018, UC Berkeley Midterm 1 February 13, 2018 Time: 80 minutes, closed-book and closed-notes, one-sided 8 ½ x 11 equation sheet allowed Please show
More information