Interference Suppression Film Capacitor - Class X2 Radial MKP 310 V AC - Standard Across the Line
|
|
- Gervase Douglas
- 5 years ago
- Views:
Transcription
1 Interference Suppression Film Capacitor - Class X2 Radial MKP 310 V AC - Standard Across the Line FEATURES 7.5 mm to 52.5 mm lead pitch Capacitance range up to 40 μf Very small dimensions Material categorization: for definitions of compliance please see APPLICATIONS For standard across the line X2 applications. See also application note: QUICK REFERENCE DATA Capacitance range (E12 series) μf to 40 μf (preferred values according to E6) Capacitance tolerance ± 20 %, ± 10 %, ± 5 % Rated AC voltage 310 V AC, 50 Hz to 60 Hz For C 10 μf For C > 10 μf Permissible DC voltage 800 V DC at 85 C 630 V DC at 110 C 575 V DC at 85 C 450 V DC at 110 C Climatic testing class according to IEC /110/56/B Maximum application temperature 110 C Leads Tinned wire Reference standards Dielectric Electrodes Construction Note For more detailed data and test requirements, contact rfi@vishay.com IEC ed-4 (2013) and EN IEC requires pass. flamm. class B CSA-E384-14, UL CQC Polypropylene film Metallized Mono construction Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Marking C-value, tolerance, rated voltage, sub-class, manufacturer s type, code for dielectric material, manufacturer location, year and week; manufacturer's logo or name; safety approvals DIMENSIONS in millimeters 2 PINS 4 PINS l w l w h Marking h P 1 l t Ø d Ø d t P 1 ± 0.5 P 2 ± 0.5 Note Ø dt ± 10 % of standard diameter specified Revision: 17-Jan-17 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nf) CAPACITANCE (numerically) Example: nf 0.01 µf nf 0.1 µf 510 nf 1.0 µf VOLTAGE 31 = 310 V AC P 1 PITCH CODE 7.5 C 10 D 15 F 22.5 I 27.5 K 37.5 P 52.5 Y SPECIAL CODE FOR TERMINAL 2 2 pins 4 4 pins P 2 = 10.2 mm 5 4 pins P 2 = 20.3 mm (#) Customized F M X M F M TYPE I t CLASS LEAD LENGTH CODE TOLERANCE M ± 20 % K ± 10 % J ± 5 % A PITCH /- 0.5 A 7.5 and ± 0.3 P 15 5 ± 1 M All 25 ± 2 I All 0: Space holder Special tolerance PACKING CODE PACKING STYLE B/T Bulk/loose (1) W Tape and reel, (H: 18.5 mm, 500 mm) SPECIAL 0 = Standard Other = Special REMARK For all pitch Pitch 10 mm G Ammo (H: 18.5 mm) Pitch 10 mm Notes For detailed tape specifications refer to Packaging Information: Terminal codes see detail tables for 37.5 mm and 52.5 mm pitch (1) Packaging will be bulk for all capacitors with pitch 15 mm and such long leads (> 5 mm) Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be T Revision: 17-Jan-17 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (U RAC ) 310 V Permissible DC voltage (U RDC ) 630 V Tangent of loss angle: at 1 khz at 10 khz C < 470 nf 10 x x nf C 1 μf 20 x x μf C 20 μf 30 x C > 20 μf 40 x Rated voltage pulse slope (du/dt) R at 435 V DC Pitch = 7.5 mm 600 V/μs Pitch = 10 mm 600 V/μs Pitch = 15 mm 400 V/μs Pitch = 22.5 mm 150 V/μs Pitch 27.5 mm 100 V/μs R between leads, for C 0.33 μf at 100 V; 1 min > M RC between leads, for C > 0.33 μf at 100 V; 1 min > 5000 s R between leads and case; 100 V; 1 min > M Withstanding (DC) voltage (cut off current 10 ma) (1) ; rise time V/s: C 1 μf 2200 V; 1 min 1 μf < C 10 μf 1800 V; 1 min C > 10 μf 1500 V; 1 min Withstanding (AC) voltage between leads and case 2120 V; 1 min Maximum application temperature 110 C Note (1) See Voltage Proof Test for Metallized Film Capacitors : ELECTRICAL DATA AND ORDERING CODE - PITCH 7.5 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS (1) w x h x l SHORT LEADS LONG LEADS (V) (μf) (g) (2) mm + 1 mm / mm 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-TOL. = ± 20 % 21031MCA2B MCM2B MCI2B0 H = 18.5 mm P 0 = 12.7 mm 21031MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G0 4.0 x 9.0 x MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G MCA2B MCM2B MCI2B MC02G x 10.5 x MCA2B MCM2B MCI2B MC02G x 11.5 x MCA2B MCM2B MCI2B MC02G0 Revision: 17-Jan-17 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 ELECTRICAL DATA AND ORDERING CODE - PITCH 7.5 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS (1) w x h x l SHORT LEADS LONG LEADS (V) (μf) (g) (2) mm + 1 mm / mm 5.0 mm ± 1.0 mm PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 % KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G0 4.0 x 9.0 x KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G0 5.0 x 10.5 x KCA2B KCM2B KCI2B KC02G KCA2B KCM2B KCI2B KC02G0 6.0 x 11.5 x KCA2B KCM2B KCI2B KC02G0 PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-TOL. = ± 5 % JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G0 4.0 x 9.0 x JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G0 5.0 x 10.5 x JCA2B JCM2B JCI2B JC02G JCA2B JCM2B JCI2B JC02G0 6.0 x 11.5 x JCA2B JCM2B JCI2B JC02G0 Notes = Standard Packing Quantity (1) H = in-tape height; P 0 = sprocket hole distance; for detailed specifications refer to Packaging Information (2) Weight for short lead product only 25.0 mm ± 2.0 mm H = 18.5 mm P 0 = 12.7 mm Revision: 17-Jan-17 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX AMMOPACK DIMENSIONS (1) REEL (1)(2) U RAC CAP. MASS SHORT LEADS LONG LEADS w x h x l (V) (μf) (g) (3) mm + 1 mm / mm 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm H = 18.5 mm P 0 = 12.7 mm PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 21031MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G0 Ø = 500 mm H = 18.5 mm P 0 = 15.0 mm MDA2B MDM2B MDI2B MD02G0 4.0 x 10.0 x MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G MDA2B MDM2B MDI2B MD02G x 11.0 x MDA2B MDM2B MDI2B MD02G x 12.0 x MDA2B MDM2B MDI2B MD02G MD02W PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G0 4.0 x 10.0 x KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G x 10.0 x KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G x11.0 x KDA2B KDM2B KDI2B KD02G KDA2B KDM2B KDI2B KD02G KD02W x 12.0 x KDA2B KDM2B KDI2B KD02G KD02W KDA2B KDM2B KDI2B KD02G KD02W0 Revision: 17-Jan-17 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX AMMOPACK DIMENSIONS (1) REEL (1)(2) U RAC CAP. MASS SHORT LEADS LONG LEADS w x h x l (V) (μf) (g) (3) mm + 1 mm / mm PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % 21031JDA2B0 5.0 mm ± 1.0 mm 21031JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G0 4.0 x 10.0 x JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G x 10.0 x JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G mm ± 2.0 mm H = 18.5 mm P 0 = 12.7 mm Ø = 500 mm H = 18.5 mm P 0 = 15.0 mm x 11.0 x JDA2B JDM2B JDI2B JD02G JDA2B JDM2B JDI2B JD02G JD02W x 12.0 x JDA2B JDM2B JDI2B JD02G JD02W JDA2B JDM2B JDI2B JD02G JD02W0 Notes = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in tape height; P 0 = sprocket hole distance; for detailed specifications refer to Packaging Information (3) Weight for short lead product only Revision: 17-Jan-17 6 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 ELECTRICAL DATA AND ORDERING CODE - PITCH 15 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX DIMENSIONS U RAC CAP. MASS w x h x l SHORT LEADS LONG LEADS (V) (μf) (g) (3) mm ± 0.3 mm 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm PITCH = 15 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 31031MFP2B MFM2B MFI2B0 REEL (1)(2) Ø = 500 mm H = 18.5 mm P 0 = 12.7 mm 31031MF02W MFP2B MFM2B MFI2B MF02W MFP2B MFM2B MFI2B MF02W MFP2B MFM2B MFI2B MF02W0 5.0 x 11.0 x MFP2B MFM2B MFI2B MF02W MFP2B MFM2B MFI2B MF02W MFP2B MFM2B MFI2B MF02W MFP2B MFM2B MFI2B MF02W x 12.0 x MFP2B MFM2B MFI2B MF02W0 900 PITCH = 15 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % x 15.0 x MFP2B MFM2B MFI2B MF02W x 16.5 x MFP2B MFM2B MFI2B MF02W x 18.5 x MFP2B MFM2B MFI2B MF02W0 - PITCH = 15 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W0 5.0 x 11.0 x KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W0 6.0 x 12.0 x KFP2B KFM2B KFI2B KF02W0 900 PITCH = 15 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % x 13.5 x KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W0 8.5 x 15.0 x KFP2B KFM2B KFI2B KF02W KFP2B KFM2B KFI2B KF02W x 16.5 x KFP2B KFM2B KFI2B KF02W x 18.5 x KFP2B KFM2B KFI2B Revision: 17-Jan-17 7 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
8 ELECTRICAL DATA AND ORDERING CODE - PITCH 15 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX DIMENSIONS U RAC CAP. MASS w x h x l SHORT LEADS LONG LEADS (V) (μf) (g) (3) Notes = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in tape height; P 0 = sprocket hole distance; for detailed specifications refer to Packaging Information (3) Weight for short lead product only 3.5 mm ± 0.3 mm PITCH = 15 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % 31031JFP2B0 5.0 mm ± 1.0 mm 31031JFM2B JFI2B0 REEL (1)(2) 31031JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W0 5.0 x 11.0 x JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W0 5.0 x 11.0 x JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W0 6.0 x 12.0 x JFP2B JFM2B JFI2B JF02W0 PITCH = 15 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % x 13.5 x JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W0 8.5 x 15.0 x JFP2B JFM2B JFI2B JF02W JFP2B JFM2B JFI2B JF02W x 16.5 x JFP2B JFM2B JFI2B JF02W x 18.5 x JFP2B JFM2B JFI2B mm ± 2.0 mm Ø = 500 mm H = 18.5 mm P 0 = 12.7 mm 1100 Revision: 17-Jan-17 8 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
9 ELECTRICAL DATA AND ORDERING CODE - PITCH 22.5 mm CATALOG NUMBER F339MX2... AND PACKAGING LOOSE IN BOX DIMENSIONS U RAC CAP. MASS w x h x l SHORT LEADS LONG LEADS (V) (μf) (g) (2) mm ± 0.3 mm REEL (1)(2) Ø = 500 mm 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm H = 18.5 mm P 0 = 12.7 mm PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % MIP2T MIM2T MII2B MI02W x 15.5 x MIP2T MIM2T MII2B MI02W MIP2T MIM2T MII2B MI02W x 16.5 x MIP2T MIM2T MII2B MI02W x 18.0 x MIP2T MIM2T MII2B MI02W x 19.5 x MIP2T MIM2T MII2B MI02W x 22.0 x MIP2T MIM2T MII2B MI02W x 22.5 x MIP2T MIM2T MII2B MI02W0 250 PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W0 6.0 x 15.5 x KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W0 7.0 x 16.5 x KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W0 8.5 x 18.0 x KIP2T KIM2T KII2B KI02W x 19.5 x KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W x 22.0 x KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W KIP2T KIM2T KII2B KI02W x 26.5 x KIP2T KIM2T KII2B KI02W0 250 PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W0 6.0 x 15.5 x JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W0 7.0 x 16.5 x JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W0 8.5 x 18.0 x JIP2T JIM2T JII2B JI02W x 19.5 x JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W x 22.0 x JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W JIP2T JIM2T JII2B JI02W x 26.5 x JIP2T JIM2T JII2B JI02W0 250 Notes = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in tape height; P 0 = sprocket hole distance; for detailed specifications refer to Packaging Information (3) Weight for short lead product only Revision: 17-Jan-17 9 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
10 ELECTRICAL DATA AND ORDERING CODE - PITCH 27.5 mm CATALOG NUMBER F339MX2... AND PACKAGING DIMENSIONS U RAC CAP. MASS LOOSE IN BOX w x h x l (V) (μf) (g) SHORT LEADS LONG LEADS 3.5 mm ± 0.3 mm 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % MKP2T MKM2T MKI2B x 19.0 x MKP2T MKM2T MKI2B MKP2T MKM2T MKI2B x 21.0 x MKP2T MKM2T MKI2B x 23.0 x MKP2T MKM2T MKI2B x 28.0 x MKP2T MKM2T MKI2B x 31.0 x MKP2T MKM2T MKI2B x 35.0 x MKP2T MKM2T MKI2B0 150 PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B x 19.0 x KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B x 21.0 x KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B x 23.0 x KKP2T KKM2T KKI2B x 25.0 x KKP2T KKM2T KKI2B x 28.0 x KKP2T KKM2T KKI2B KKP2T KKM2T KKI2B x 31.0 x KKP2T KKM2T KKI2B x 35.0 x KKP2T KKM2T KKI2B0 150 PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B x 19.0 x JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B x 21.0 x JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B x 23.0 x JKP2T JKM2T JKI2B x 25.0 x JKP2T JKM2T JKI2B x 28.0 x JKP2T JKM2T JKI2B JKP2T JKM2T JKI2B x 31.0 x JKP2T JKM2T JKI2B x 35.0 x JKP2T JKM2T JKI2B0 150 Notes = Standard Packing Quantity (1) Weight for short lead product only Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
11 ELECTRICAL DATA AND ORDERING CODE - PITCH 37.5 mm / PITCH 52.5 mm (two pin version) CATALOG NUMBER F339MX2... AND PACKAGING DIMENSIONS U RAC CAP. MASS LOOSE IN BOX w x h x l (V) (μf) (g) (1) SHORT LEADS LONG LEADS 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm 310 PITCH = 37.5 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 20 % x 22.5 x MPM2T MPI2T x 24.5 x MPM2T MPI2T x 32.5 x MPM2T MPI2T x 35.5 x MPM2T MPI2T x 44.0 x MPM2T MPI2T x 45.0 x MPM2T MPI2T0 63 PITCH = 37.5 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 10 % x 24.5 x KPM2T KPI2T KPM2T KPI2T x 28.5 x KPM2T KPI2T KPM2T KPI2T x 32.5 x KPM2T KPI2T x 35.5 x KPM2T KPI2T x 38.5 x KPM2T KPI2T x 45.0 x KPM2T KPI2T0 63 PITCH = 37.5 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 5 % x 24.5 x JPM2T JPI2T JPM2T JPI2T x 28.5 x JPM2T JPI2T JPM2T JPI2T x 32.5 x JPM2T JPI2T x 35.5 x JPM2T JPI2T x 38.5 x JPM2T JPI2T x 45.0 x JPM2T JPI2T0 63 PITCH = 52.5 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 20 % MYM2T MYI2T x 45.0 x MYM2T MYI2T x 45.0 x MYM2T MYI2T MYM2T MYI2T x 50.0 x MYM2T MYI2T0 40 PITCH = 52.5 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 10 % x 45.0 x KYM2T KYI2T x 45.0 x KYM2T KYI2T KYM2T KYI2T x 50.0 x KYM2T KYI2T0 40 PITCH = 52.5 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 5 % x 45.0 x JYM2T JYI2T x 45.0 x JYM2T JYI2T x 50.0 x JYM2T JYI2T0 40 Notes = Standard Packing Quantity (1) Weight for short lead product only Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
12 ELECTRICAL DATA AND ORDERING CODE - PITCH 37.5 mm / PITCH 52.5 mm (four pin version) CATALOG NUMBER F339MX2... AND PACKAGING DIMENSIONS U RAC CAP. MASS LOOSE IN BOX w x h x l (V) (μf) (g) (1) SHORT LEADS LONG LEADS 5.0 mm ± 1.0 mm 25.0 mm ± 2.0 mm 310 PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 20 % x 35.5 x MPM4T x 44.0 x MPM4T x 45.0 x MPM4T PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 20 % x 45.0 x MPM5T PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 10 % x 38.5 x KPM4T x 45.0 x KPM4T PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 10 % x 45.0 x KPM5T PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 5 % x 38.5 x JPM4T x 45.0 x JPM4T PITCH P 1 = 37.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.0 mm ± 0.1 mm; C-TOL. = ± 5 % x 45.0 x JPM5T PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 20 % MYM4T MYI4T x 45.0 x MYM4T MYI4T x 45.0 x MYM4T MYI4T0 45 PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 20 % x 45.0 x MYM5T MYI5T x 50.0 x MYM5T MYI5T x 50.0 x MYM5T MYI5T0 40 PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 10 % x 45.0 x KYM4T KYI4T x 45.0 x KYM4T KYI4T0 45 PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 10 % x 45.0 x KYM5T KYI5T KYM5T KYI5T x 50.0 x KYM5T KYI5T0 40 PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 10.2 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 5 % x 45.0 x JYM4T JYI4T x 45.0 x JYM4T JYI4T0 45 PITCH P 1 = 52.5 mm ± 0.5 mm; P 2 = 20.3 mm ± 0.5 mm; d t = 1.2 mm ± 0.12 mm; C-TOL. = ± 5 % x 45.0 x JYM5T JYI5T x 50.0 x JYM5T JYI5T0 40 Notes = Standard Packing Quantity (1) Weight for short lead product only Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
13 APPROVALS SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINK EN (ENEC) (= IEC ed-4 (2013)) 310 V AC 1 nf to 40 μf UL V AC 1 nf to 40 μf E CSA-E V AC 1 nf to 40 μf E CQC 310 V AC 1 nf to 40 μf (L) (F) CB - Test certificate 310 V AC 1 nf to 40 μf DE The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech.Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom. MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Packaging Information: Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches 15 mm capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clamped in addition Space Requirements on Printed Circuit-Board The maximum space for length (I max. ), width (W max. ), and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings: For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm and h = 0.1 mm For products with pitch = 37.5 mm, w = l = 0.7 mm; h = 0.5 mm For products with pitch = 52.5 mm, w = l = 1.0 mm and h = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Eccentricity w max. = W + Δ I max. = I + Δ CBA116 h max. = h + Δ Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: Soldering Guidelines for Film Capacitors : Storage Temperature T stg = -25 C to +35 C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 C ± 1 C, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
14 CHARACTERISTICS ΔC/C (%) typical min. max. Impedance (Ω) µf 40 µf 1 nf 4.7 nf 10 nf 47 nf 100 nf 1 µf 470 nf 4.7 µf T amb ( C) Capacitance as a function of ambient temperature (typical curve) f (Hz) 10 8 Impedance as a function of frequency (typical curve) Dissipation factor (x 10-4 ) C 10 µf 220 nf < C 1 µf 47 nf < C 220 nf 10 nf < C 47 nf C 10 nf f (MHz) X f (Hz) 10 5 Tangent of loss angle as a function of frequency (typical curve) C (nf) 10 5 Resonant frequency as a function of capacitance (typical curve) 10 3 AC voltage (V) 10 2 AC current (ma) µf 10 µf 4.7 µf 1 µf 470 nf 100 nf 47 nf 10 nf 4.7 nf T amb 110 C 1 nf f (Hz) f (Hz) 10 6 Max. RMS voltage as a function of frequency Max. RMS current as a function of frequency Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
15 CHARACTERISTICS 10 6 RC (s) T amb ( C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES For X2 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum mains voltage of 310 V AC. For series impedance applications we refer to application note For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse programs must be used. The maximum ambient temperature must not exceed 110 C. Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 V DC and divided by the applied voltage. INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, IEC ed-4 (2013) and Specific Reference Data. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters General data of this specification Initial measurements Capacitance Tangent of loss angle: for C 1 μf at 10 khz or for C > 1 μf at 1 khz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 No visible damage 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 C ± 5 C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
16 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C Final measurements Visual examination No visible damage Legible marking SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle Insulation resistance Capacitance Tangent of loss angle: for C 1 μf at 10 khz or for C > 1 μf at 1 khz C/C 5 % of the value measured initially Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured initially As specified in section Insulation Resistance of this specification 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min No visible damage Legible marking 4.6 Rapid change of temperature A = -55 C B = +125 C Inspection 5 cycles Duration t = 30 min No visible damage 4.7 Vibration Visual examination Mounting: see section Mounting of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Final inspection Visual examination No visible damage 4.9 Shock Mounting: see section Mounting for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Final measurements Visual examination No visible damage Capacitance Tangent of loss angle Insulation resistance C/C 5 % of the value measured initially. Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured initially As specified in section Insulation Resistance of this specification Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
17 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence Initial measurements Capacitance Measured in and Tangent of loss angle: measured initially in C1A and C1B Dry heat Temperature: 110 C Duration: 16 h Damp heat cyclic Test Db First cycle Cold Temperature: -55 C Duration: 2 h Damp heat cyclic Test Db Remaining cycles Final measurements Visual examination No visible damage Capacitance Tangent of loss angle Voltage proof 1350 V DC ; 1 min between terminations Insulation resistance SUB-GROUP C Damp heat steady state 56 days; 40 C; 90 % to 95 % RH no load Legible marking C/C 5 % of the value measured in Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured in No permanent breakdown or flash-over 50 % of values specified in section Insulation Resistance of this specification Initial measurements Capacitance Tangent of loss angle: at 1 khz Final measurements Visual examination No visible damage Legible marking Capacitance C/C 5 % of the value measured in Tangent of loss angle Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured in Voltage proof 1350 V DC ; 1 min between terminations Insulation resistance No permanent breakdown or flash-over 50 % of values specified in section Insulation Resistance of this specification Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
18 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C Initial measurements Capacitance Tangent of loss angle: for C 1 μf at 10 khz or for C > 1 μf at 1 khz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kv for C 1 μf X2: 2.5 kv/c for C > 1 μf Max. 24 pulses No self healing breakdowns or flash-over 4.14 Endurance Duration: h 1.25 x U RAC at 110 C Once in every hour the voltage is increased to V RMS for 0.1 s via resistor of 47 ± 5 % Final measurements Visual examination No visible damage Legible marking Capacitance Tangent of loss angle Voltage proof 1350 V DC ; 1 min between terminations 2120 V AC ; 1 min between terminations and case C/C 10 % compared to values measured in Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured in No permanent breakdown or flash-over Insulation resistance SUB-GROUP C Charge and discharge cycles Charged to 435 V DC Discharge resistance: 435 V DC R = x C du/dt R = 2.2 for pitch 37.5 mm and 52.5 mm 50 % of values specified in section Insulation Resistance of this specification Initial measurements Capacitance Tangent of loss angle: for C 1 μf at 10 khz or for C > 1 μf at 1 khz Final measurements Capacitance C/C 10 % compared to values measured in Tangent of loss angle Insulation resistance Increase of tan : for: C 1 μf or for: C > 1 μf Compared to values measured in % of values specified in section Insulation Resistance of this specification Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
19 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C Radio frequency characteristic Resonance frequency 0.9 times the value as specified in section Resonant Frequency of this specification SUB-GROUP C Passive flammability Class B Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: V 250: 10 s 250 < V 500: 20 s 500 < V 1: 30 s V > 1: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. 12 mm ~ 8 mm 45.0 SUB-GROUP C Active flammability 20 cycles of 2.5 kv discharges on the test capacitor connected to U RAC The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Revision: 17-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
20 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 9
THB Interference Suppression Film Capacitors - Class X2 Radial MKP 305 V AC - Across the Line
THB Interference Suppression Film Capacitors - Class X2 Radial MKP 305 V AC - Across the Line FEATURES AEC-Q200 qualified (rev. D) IEC 60384-14: 2013 / AMD1: 2016 grade IIB: 85 C, 85 % RH, 500 h at U RAC
More informationInterference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line
Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line FEATURES 15 mm to 27.5 mm lead pitch 440 V rated AC voltage Material categorization: For definitions of
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationInterference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP338 1 X1 P l h lt w Ø d t F' (1) F 10 l h h' H w Ø d t FEATURES 15 mm to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm Supplied loose in box, taped on ammopack
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions
More informationMetallized Polyester Film Capacitors MKT Radial Potted Types
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance
More informationDC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS
More informationDC Film Capacitors MKT Radial Lacquered Type
DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please
More informationInterference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP 336 6 Y2 l w FEATURES 10 mm to 15 mm lead pitch. Supplied loose in box, taped on reel Compliant to RoHS directive 2002/95/EC h PERMISSIBLE C VOLTAGE C V P ±
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationTHB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 C / 85 % RH 1000 h at U NAC
THB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 C / 85 % RH 00 h at U NAC FEATURES High robustness under high humidity THB 85 C, 85 % RH, 00 h at rated U NAC UL 8 (electrical pending)
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationDC Film Capacitors MKT Axial Type
MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
Metallized Polyester Film Capacitors MKT470 FEATURES 168x12(halfpage) l w Pitch 5 mm available loose in box, ammopack and taped on reel. Compliant to RoHS Directive 2002/95/EC P±0.3 Dimensions in APPLICATIONS
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationMetallized Polypropylene Film Capacitor Radial Snubber Type
Metallized Polypropylene Film Capacitor Radial Snubber Type FEATURES Reduce EMI by clamping voltage and current ringing High pulse strength (dv/dt up to 2500 V/μs) Low inductance construction (low ESL)
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationInterference Suppression PCX2 335 film capacitors
MKP RADIAL POTTED CAPACITORS Pitch 15.0/22.5/27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01to 1.0 Capacitance tolerance 10 %, 20 % Rated(AC) voltage 50 to 60 Hz 275 V ~ Climatic category
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationInterference Suppression PCX2 337 film capacitors
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01to 3.3 Capacitance tolerance 10 %, 20 % Rated (AC) voltage 50 to 60 Hz 275 V ~ Climatic
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationAluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationMetallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type
Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationQUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More information-55 ~ IEC (3rd edition) and EN Safety approvals
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 3.3μF Capacitance tolerance ± 10 %, ± 20 % Rated (AC)
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationEnergy Storage Double Layer Capacitors
96 DLC Energy Storage Double Layer Capacitors FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double layer Radial leads,
More informationSeries Impedance PCX2 347 Film capacitors
MKT RADIAL POTTED CAPACITORS Pitch 15.0/22.5/27.5mm 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.1μF to 2.2μF Capacitance tolerance ± 10 %, ± 20 % Rated (AC) voltage 50 to
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationAxial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationElectrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationRuggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationGreen Thick Film Chip Resistors
Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions
More informationCeramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationInterference Suppression film capacitors
MKP RADIAL POTTED CAPACITORS (100) Pitch 10.0/15.0/22.5/27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01to 2.2 Capacitance tolerance 10 %, 20 % Rated (AC) voltage 50 to 60 Hz 275 V Climatic
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationLead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors
Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationMetallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC
MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection
More informationAluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationAutomotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC
Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC FEATURES AEC-Q200 qualified Withstands 85 / 85 / 1000 h test Can pass 3000 temperature cycles (from -55 C to
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationInterference Suppression film capacitors
MKP RADIAL POTTED CAPACITORS (85) Pitch 10.0/15.0/22.5/27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01to 2.2 Capacitance tolerance 10%, 20% Rated (AC) voltage 50 to 60 Hz 275 V ~ Climatic
More informationSnubber MMKP 386 AC and pulse double metallized film capacitor
Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP
More informationEMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
More informationFusible, Non-Flammable Metal Film Leaded Resistors
Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More information