Multipoles, Electrostatics of Macroscopic Media, Dielectrics

Transcription

1 Multipoles, Electrostatics of Macroscopic Media, Dielectrics 1 Reading: Jackson 4.1 through 4.4, 4.7 Consider a distribution of charge, confined to a region with r < R. Let's expand the resulting potential for r > R in spherical harmonics. Recall: (Jackson 3.70 and Topic 3, slide 34) (multipole expansion)

2 with (multipole moments) 2 Why is this useful? If we calculate using (1), then we have to do an integral over for each observation point With the multipole expansion, we only have to perform integrals to find the q lm. The number of q lm we calculate depends on the required accuracy (potentials from higher multipoles fall off as higher powers of r). Once we have the q lm, we can find for as many as we like without doing any more integrals. Since (Jackson 3.54 and Topic 3, slide 28)

3 Explicit evaluation in Cartesian coords: 3 where the electric dipole moment

4 The monopole (l = 0) contribution to is 4 The dipole (l = 1) contribution to is

5 Including the monopole, dipole, and quadrupole terms, 5 with Expansion beyond quadrupole gets messy. The electric field due to a dipole at the origin:

6 Note: NB: is a unit vector along, not a Cartesian unit vector. 1) Multipole moments depend on choice of origin. For example, for a point charge at the origin, only l = 0 multipole is non zero. If point charge is displaced from origin, higher order moments do not vanish. 6 2) The lowest non vanishing multipole moment is independent of the origin. Consider a charge dist localized to a volume V and subjected to a potential due to charges located outside of V. The potential energy of the charge dist in the external potential is If varies slowly over V, then Taylor expand it about an origin in V.

7 7 since the charge that produces is located outside V. Substituting this approx for into the integral yields

8 As a simple example, the interaction energy between 2 dipoles is 8 where points from 2 to 1, i.e., along SP 4.1, 4.2 Jackson section 4.3: When an electric field is applied to a dielectric, the dominant multipole moment of the response is the dipole. = dipole moment per unit volume Consider a volume where does not vary substantially; specifically a box with length d (along the direction of the dipole moments) and end face area A. d A total dipole moment in volume Ad : p = PAd = qd

9 9 If end face is slanted at angle, then area increases by 1/cos Diverging polarization yields bound charge pile up: Charge inside volume = = charge driven past bounding surface

10 To see these results directly from the dipole potential: 10 potential due to polarization (slide 4):

11 is the free charge volume density 11 with the electric displacement The equations of electrostatics in a dielectric are: For a linear, isotropic medium, e is the electric susceptibility is called the dielectric constant.

12 For a linear dielectric: 12 The final steps are for a uniform medium (i.e., doesn't vary with position). In this case, (The subscript f is often omitted.) => All problems in the medium are the same as in vacuum, except the field produced by a charge is reduced by factor 0 /. Boundary conditions at a surface with charge density (not including polarization charge): points from medium 1 to medium 2.

13 Example (Jackson sec 4.4): Find everywhere for z = 0 1 z q d (r,, z) 13 2 Boundary conditions: D and E are continuous => at z = 0,

14 For z > 0, use the method of images: charge q' at z' = d 14 For z < 0, try a charge q'' at z'' = d

15 Tangential component is E r 15 (This also follows from continuity of at z = 0.) From (1b) and (2b), We've found a potential that satisfies Poisson's eqn everywhere and the boundary conditions. Next, find the polarization charge on the plane z = 0:

16 16 Electrostatic energy in dielectric media Given charge density in a region of space, the work done to bring in a differential amount of new charge, with density is the potential due to the original charge.

17 17 0 if is localized For a linear medium,

18 If the dielectric is not linear, then it is not generally true that 18 In this case, the detailed history of the system must be taken into account, using eq. (1). SP