LED light engines LED linear / area

Transcription

1 Module LLE G4 24x112 / 24x14 mm ADV Modules LLE ADVANCED Product description Ideal for linear lights 4 and 5 feet Length available in 1,12 mm (4 feet) and 1,4 mm (5 feet) Typ. luminous flux 65, 1,25 and 2, lm Efficacy of the module up to 181 lm/w High colour rendering index CRI > 8 Small colour tolerance MacAdam 3 1 Colour temperatures 3, K and 4, K Significant saving in production time due to little wiring effort Broad portfolio from extruded lenses and covers available Simple installation (e.g. clips or screws) Long life-time: 5, hours 5-year guarantee È Standards, page 12 Colour temperatures and tolerances, page

2 Module LLE G4 24x112 / 24x14 mm ADV Modules LLE ADVANCED Technical data Beam characteristic 12 Ambient temperature range C tp rated 65 C tc 95 C Irated for 65 lm and 125 lm per feet 325 ma Irated for 2 lm per feet 35 ma Imax 54 ma Max. permissible LF current ripple 66 ma Max. permissible peak current 78 ma / max. 1 ms Max. working voltage for insulation V Insulation test voltage 1.67 kv CTI of the printed circuit board 6 ESD classification severity level 4 Risk group (IEC 62471:28) 3 RG1 Classification acc. to IEC 6231 Built-in Type of protection IP max. 5,5 1,65 14,5 23, (25) ,3 ø4,3 tc 5,25 ø4,3 125 LLE G4 24x112mm ADV max. 5,5 1,65 14, ,4 2,8 5,25 7,3 (25) tc 3 2,4 7,3 ø4,3 5,25 ø4,3 23,6 125 LLE G4 24x14mm ADV 2,8 5,25 7,3 Ordering data Type 65 lm per feet Article number Colour Packaging temperature carton Weight per pc. LLE G4 24x112mm 26lm 83 ADV , K 2 pc(s)..9 kg LLE G4 24x112mm 26lm 84 ADV , K 2 pc(s)..9 kg LLE G4 24x14mm 325lm 83 ADV , K 2 pc(s)..11 kg LLE G4 24x14mm 325lm 84 ADV , K 2 pc(s)..11 kg 125 lm per feet LLE G4 24x112mm 48lm 83 ADV , K 2 pc(s)..92 kg LLE G4 24x112mm 48lm 84 ADV , K 2 pc(s)..92 kg LLE G4 24x14mm 6lm 83 ADV , K 2 pc(s)..114 kg LLE G4 24x14mm 6lm 84 ADV , K 2 pc(s)..114 kg 2 lm per feet LLE G4 24x112mm 8lm 83 ADV , K 2 pc(s)..95 kg LLE G4 24x112mm 8lm 84 ADV , K 2 pc(s)..95 kg LLE G4 24x14mm 1lm 83 ADV , K 2 pc(s)..118 kg LLE G4 24x14mm 1lm 84 ADV , K 2 pc(s)..118 kg 2

3 Specific technical data Type 4 Photometric code 65lm per foot Operating mode HE at 225 ma Typ. luminous flux at tp = 25 C 5 Typ. luminous flux at tp = 65 C 5 Typ. forward current Min. forward voltage at tp = 65 C Max. forward voltage at tp = 25 C Typ. power consumption at tp = 65 C 5 Efficacy of the module at tp = 25 C Efficacy of the module at tp = 65 C Efficacy of the system at tp = 65 C LLE G4 24x112mm 26lm 83 ADV 83/359 1,77 lm 1,69 lm 225 ma 42.5 V 48.3 V 1. W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 1,85 lm 1,77 lm 225 ma 42.5 V 48.3 V 1. W 181 lm/w 177 lm/w 163 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 83/359 2,21 lm 2,11 lm 225 ma 53.1 V 6.4 V 12.5 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 84/359 2,31 lm 2,21 lm 225 ma 53.1 V 6.4 V 12.5 W 181 lm/w 177 lm/w 163 lm/w > 8 65lm per foot Operating mode NM at 3 ma LLE G4 24x112mm 26lm 83 ADV 83/359 2,33 lm 2,22 lm 3 ma 43.3 V 49.2 V 13.6 W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 2,44 lm 2,33 lm 3 ma 43.3 V 49.2 V 13.6 W 176 lm/w 172 lm/w 158 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 83/359 2,91 lm 2,78 lm 3 ma 54.2 V 61.5 V 17. W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 84/359 3,5 lm 2,91 lm 3 ma 54.2 V 61.5 V 17. W 176 lm/w 172 lm/w 158 lm/w > 8 65lm per foot Operating mode NM at 325 ma LLE G4 24x112mm 26lm 83 ADV 83/359 2,5 lm 2,38 lm 325 ma 43.6 V 49.5 V 14.8 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 2,61 lm 2,5 lm 325 ma 43.6 V 49.5 V 14.8 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 83/359 3,12 lm 2,98 lm 325 ma 54.5 V 61.8 V 18.5 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 84/359 3,27 lm 3,12 lm 325 ma 54.5 V 61.8 V 18.5 W 173 lm/w 169 lm/w 155 lm/w > 8 65lm per foot Operating mode NM at 35 ma LLE G4 24x112mm 26lm 83 ADV 83/359 2,68 lm 2,55 lm 35 ma 43.9 V 49.7 V 16. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 2,8 lm 2,68 lm 35 ma 43.9 V 49.7 V 16. W 171 lm/w 167 lm/w 154 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 83/359 3,34 lm 3,19 lm 35 ma 54.8 V 62.2 V 2. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 84/359 3,5 lm 3,34 lm 35 ma 54.8 V 62.2 V 2. W 171 lm/w 167 lm/w 154 lm/w > 8 65lm per foot Operating mode HO at 4 ma LLE G4 24x112mm 26lm 83 ADV 83/359 3,2 lm 2,89 lm 4 ma 44.4 V 5.3 V 18.5 W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 3,17 lm 3,2 lm 4 ma 44.4 V 5.3 V 18.5 W 167 lm/w 163 lm/w 15 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 85/359 3,78 lm 3,61 lm 4 ma 55.5 V 62.8 V 23.1 W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 827/359 3,96 lm 3,78 lm 4 ma 55.5 V 62.8 V 23.1 W 167 lm/w 163 lm/w 15 lm/w > 8 65lm per foot Operating mode HO at 5 ma LLE G4 24x112mm 26lm 83 ADV 83/359 3,69 lm 3,52 lm 5 ma 45.4 V 51.3 V 23.6 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x112mm 26lm 84 ADV 84/359 3,86 lm 3,69 lm 5 ma 45.4 V 51.3 V 23.6 W 16 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 325lm 83 ADV 83/359 4,61 lm 4,4 lm 5 ma 56.7 V 64.1 V 29.5 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x14mm 325lm 84 ADV 84/359 4,83 lm 4,61 lm 5 ma 56.7 V 64.1 V 29.5 W 16 lm/w 156 lm/w 144 lm/w > 8 1 Integral measurement over the complete module. 2 If mounted with M4 screws and plastic washers. 3 Measured at operating mode HO. 4 HE... high efficiency. NM... nominal mode. HO... high output. 5 Tolerance range for optical and electrical data: ±1 %. Colour rendering index CRI 3

4 Spezifische technische Daten Type 4 Photometric code 125lm per foot Operating mode HE at 225 ma Typ. luminous flux at tp = 25 C 5 Typ. luminous flux at tp = 65 C 5 Typ. forward current Min. forward voltage at tp = 65 C Max. forward voltage at tp = 25 C Typ. power consumption at tp = 65 C 5 Efficacy of the module at tp = 25 C Efficacy of the module at tp = 65 C Efficacy of the system at tp = 65 C LLE G4 24x112mm 48lm 83 ADV 83/359 3,53 lm 3,37 lm 225 ma 85. V 96.7 V 2. W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 3,7 lm 3,53 lm 225 ma 85. V 96.7 V 2. W 181 lm/w 177 lm/w 163 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 4,42 lm 4,22 lm 225 ma 16.2 V 12.8 V 25. W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 4,63 lm 4,42 lm 225 ma 16.2 V 12.8 V 25. W 181 lm/w 177 lm/w 163 lm/w > 8 125lm per foot Operating mode NM at 3 ma LLE G4 24x112mm 48lm 83 ADV 83/359 4,66 lm 4,45 lm 3 ma 86.7 V 98.4 V 27.1 W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 4,88 lm 4,66 lm 3 ma 86.7 V 98.4 V 27.1 W 176 lm/w 172 lm/w 158 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 5,82 lm 5,56 lm 3 ma 18.3 V 123. V 33.9 W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 6,1 lm 5,82 lm 3 ma 18.3 V 123. V 33.9 W 176 lm/w 172 lm/w 158 lm/w > 8 125lm per foot Operating mode NM at 325 ma LLE G4 24x112mm 48lm 83 ADV 83/359 4,99 lm 4,76 lm 325 ma 87.2 V 98.9 V 29.6 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 5,23 lm 4,99 lm 325 ma 87.2 V 98.9 V 29.6 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 6,24 lm 5,96 lm 325 ma 19. V V 36.9 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 6,53 lm 6,24 lm 325 ma 19. V V 36.9 W 173 lm/w 169 lm/w 155 lm/w > 8 125lm per foot Operating mode NM at 35 ma LLE G4 24x112mm 48lm 83 ADV 83/359 5,35 lm 5,11 lm 35 ma 87.7 V 99.5 V 32. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 5,6 lm 5,35 lm 35 ma 87.7 V 99.5 V 32. W 171 lm/w 167 lm/w 154 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 6,69 lm 6,39 lm 35 ma 19.6 V V 4. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 7,1 lm 6,69 lm 35 ma 19.6 V V 4. W 171 lm/w 167 lm/w 154 lm/w > 8 125lm per foot Operating mode HO at 4 ma LLE G4 24x112mm 48lm 83 ADV 83/359 6,4 lm 5,77 lm 4 ma 88.8 V 1.5 V 37. W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 6,33 lm 6,5 lm 4 ma 88.8 V 1.5 V 37. W 167 lm/w 163 lm/w 15 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 7,55 lm 7,21 lm 4 ma 111. V V 46.3 W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 7,91 lm 7,56 lm 4 ma 111. V V 46.3 W 167 lm/w 163 lm/w 15 lm/w > 8 125lm per foot Operating mode HO at 5 ma LLE G4 24x112mm 48lm 83 ADV 83/359 7,38 lm 7,4 lm 5 ma 9.8 V 12.6 V 47.3 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x112mm 48lm 84 ADV 84/359 7,73 lm 7,38 lm 5 ma 9.8 V 12.6 V 47.3 W 16 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 6lm 83 ADV 83/359 9,22 lm 8,8 lm 5 ma V V 59.1 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x14mm 6lm 84 ADV 84/359 9,66 lm 9,22 lm 5 ma V V 59.1 W 16 lm/w 156 lm/w 144 lm/w > 8 1 Integral measurement over the complete module. 2 If mounted with M4 screws and plastic washers. 3 Measured at operating mode HO. 4 HE... high efficiency. NM... nominal mode. HO... high output. 5 Tolerance range for optical and electrical data: ±1 %. Colour rendering index CRI 4

5 Spezifische technische Daten Type 4 Photometric code 2lm per foot Operating mode HE at 225 ma Typ. luminous flux at tp = 25 C 5 Typ. luminous flux at tp = 65 C 5 Typ. forward current Min. forward voltage at tp = 65 C Max. forward voltage at tp = 25 C Typ. power consumption at tp = 65 C 5 Efficacy of the module at tp = 25 C Efficacy of the module at tp = 65 C Efficacy of the system at tp = 65 C LLE G4 24x112mm 8lm 83 ADV 83/359 5,3 lm 5,6 lm 225 ma V 145. V 29.9 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 5,55 lm 5,3 lm 225 ma V 145. V 29.9 W 181 lm/w 177 lm/w 163 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 6,62 lm 6,32 lm 225 ma V V 37.4 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 6,94 lm 6,63 lm 225 ma V V 37.4 W 181 lm/w 177 lm/w 163 lm/w > 8 2lm per foot Operating mode NM at 3 ma LLE G4 24x112mm 8lm 83 ADV 83/359 6,99 lm 6,67 lm 3 ma 13. V V 4.7 W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 7,32 lm 6,99 lm 3 ma 13. V V 4.7 W 176 lm/w 172 lm/w 158 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 8,73 lm 8,34 lm 3 ma V V 5.9 W 168 lm/w 164 lm/w 151 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 9,15 lm 8,73 lm 3 ma V V 5.9 W 176 lm/w 172 lm/w 158 lm/w > 8 2lm per foot Operating mode NM at 325 ma LLE G4 24x112mm 8lm 83 ADV 83/359 7,49 lm 7,15 lm 325 ma 13.8 V V 44.3 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 7,84 lm 7,49 lm 325 ma 13.8 V V 44.3 W 173 lm/w 169 lm/w 155 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 9,36 lm 8,93 lm 325 ma V V 55.4 W 165 lm/w 161 lm/w 148 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 9,8 lm 9,36 lm 325 ma V V 55.4 W 173 lm/w 169 lm/w 155 lm/w > 8 2lm per foot Operating mode NM at 35 ma LLE G4 24x112mm 8lm 83 ADV 83/359 8,2 lm 7,66 lm 35 ma V V 48. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 8,41 lm 8,3 lm 35 ma V V 48. W 171 lm/w 167 lm/w 154 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 1,3 lm 9,58 lm 35 ma V V 6. W 163 lm/w 16 lm/w 147 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 1,51 lm 1,3 lm 35 ma V V 6. W 171 lm/w 167 lm/w 154 lm/w > 8 2lm per foot Operating mode HO at 4 ma LLE G4 24x112mm 8lm 83 ADV 83/359 9,7 lm 8,66 lm 4 ma V 15.8 V 55.5 W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 9,5 lm 9,7 lm 4 ma V 15.8 V 55.5 W 167 lm/w 163 lm/w 15 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 11,33 lm 1,82 lm 4 ma V V 69.4 W 159 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 11,87 lm 11,33 lm 4 ma V V 69.4 W 167 lm/w 163 lm/w 15 lm/w > 8 2lm per foot Operating mode HO at 5 ma LLE G4 24x112mm 8lm 83 ADV 83/359 11,7 lm 1,57 lm 5 ma V V 7.9 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x112mm 8lm 84 ADV 84/359 11,59 lm 11,7 lm 5 ma V V 7.9 W 16 lm/w 156 lm/w 144 lm/w > 8 LLE G4 24x14mm 1lm 83 ADV 83/359 13,83 lm 13,21 lm 5 ma 17.2 V V 88.6 W 152 lm/w 149 lm/w 137 lm/w > 8 LLE G4 24x14mm 1lm 84 ADV 84/359 14,49 lm 13,83 lm 5 ma 17.2 V V 88.6 W 16 lm/w 156 lm/w 144 lm/w > 8 1 Integral measurement over the complete module. 2 If mounted with M4 screws and plastic washers. 3 Measured at operating mode HO. 4 HE... high efficiency. NM... nominal mode. HO... high output. 5 Tolerance range for optical and electrical data: ±1 %. Colour rendering index CRI 5

6 ACCES- SORIES LINEAR COVER SY Product description LINEAR COVER for LLE 24 Protection against direct touch for non-selv applications Fast snap on mounting on to LLE 24 with clips or plastic washers High transmission: transparent 94 %, semi-transparent 87 %, diffuse 76 % Made of PMMA Tolerances: ± 1 mm for 597 mm length (ends finished), + 2 mm for 1,2 / 1,5 / 1,6 / 1,8 mm length (ends raw) R ±.3 1.3± / ±.5 Ordering data Type Article number Colour Length Packaging carton Weight per pc. LINEAR COVER SY Transparent 16mm Transparent 1,6 mm 12 pc(s)..272 kg LINEAR COVER SY Frosted 18mm Semi-transparent 1,8 mm 12 pc(s)..38 kg LINEAR COVER SY Frosted 16mm Semi-transparent 1,6 mm 12 pc(s)..272 kg LINEAR COVER SY Frosted 15mm Semi-transparent 1,5 mm 12 pc(s)..244 kg LINEAR COVER SY Frosted 12mm Semi-transparent 1,2 mm 12 pc(s)..25 kg LINEAR COVER SY Frosted 597mm 2834 Semi-transparent 597 mm 12 pc(s)..12 kg LINEAR COVER SY Diffuse 18mm Diffuse 1,8 mm 12 pc(s)..38 kg LINEAR COVER SY Diffuse 16mm Diffuse 1,6 mm 12 pc(s)..272 kg LINEAR COVER SY Diffuse 15mm Diffuse 1,5 mm 12 pc(s)..257 kg LINEAR COVER SY Diffuse 12mm Diffuse 1,2 mm 12 pc(s)..25 kg LINEAR COVER SY Diffuse 597mm Diffuse 597 mm 12 pc(s)..12 kg 6

7 ACCES- SORIES ACL ENDCAP LLE24 PUSH-FIX Product description ENDCAP for LLE 24 Fast snap on mounting (sheet thickness.5 1. mm), for drilling hole 4 mm Made of Polycarbonat R19.2 R Ordering data Type Article number Colour Packaging carton Weight per pc. ACL ENDCAP LLE24 PUSH-FIX White 48 pc(s)..3 kg 7

8 ACCES- SORIES ACL LENS 24mm Product description Linear lens for LLE 24 Available with different beam characteristics Protection against direct touch for non-selv applications Fast snap on mounting on to LLE 24 with clips or plastic washers Linear lense made of PMMA Available lengths: 1,2, 1,5, 1,6 and 1,8 mm, Tolerance: + 1 mm, at 1,6 mm ± 2 mm tolerances and ends raw Photometric data available on website ACL LINEAR LENS 24mm 6 ACL LINEAR LENS 24mm 9 ACL LINEAR LENS 24mm INTENSE ACL LINEAR LENS 24mm BATWING ACL LINEAR LENS 24mm ASY ACL LINEAR LENS 24mm DASY 8

9 ACCES- SORIES ACL LENS 24mm /-.4 32±.5 ACL LINEAR LENS 24mm 6 and /-.4 32±.5 17,26 8,64 1,4 13 1, ACL LINEAR LENS 24mm INTENSE 13 1, ACL LINEAR LENS 24mm BATWING 16,59 3,11 8, ,5 5, ACL LINEAR LENS 24mm ASY 13,1 2,43 8, ,5 6, ACL LINEAR LENS 24mm DASY 9

10 ACCES- SORIES ACL LENS 24mm Ordering data Type Article number Beam characteristic Efficiency Packaging carton Weight per pc. ACL LINEAR LENS 24x12mm % 21 pc(s)..196 kg ACL LINEAR LENS 24x12mm % 21 pc(s)..165 kg ACL LINEAR LENS 24x16mm % 21 pc(s)..261 kg ACL LINEAR LENS 24x16mm % 21 pc(s)..221 kg ACL LINEAR LENS 24x12mm INTENSE % 18 pc(s)..261 kg ACL LINEAR LENS 24x15mm INTENSE % 18 pc(s)..326 kg ACL LINEAR LENS 24x18mm INTENSE % 18 pc(s)..392 kg ACL LINEAR LENS 24x12mm BATWING batwing 95 % 18 pc(s)..275 kg ACL LINEAR LENS 24x15mm BATWING batwing 95 % 18 pc(s)..344 kg ACL LINEAR LENS 24x18mm BATWING batwing 95 % 18 pc(s)..412 kg ACL LINEAR LENS 24x12mm ASY 2823 asymmetric 95 % 18 pc(s)..25 kg ACL LINEAR LENS 24x15mm ASY asymmetric 95 % 18 pc(s)..312 kg ACL LINEAR LENS 24x18mm ASY asymmetric 95 % 18 pc(s)..375 kg ACL LINEAR LENS 24x12mm DASY double asymmetric 92 % 18 pc(s)..249 kg ACL LINEAR LENS 24x15mm DASY double asymmetric 92 % 18 pc(s)..311 kg ACL LINEAR LENS 24x18mm DASY double asymmetric 92 % 18 pc(s)..373 kg 1

11 ACCES- SORIES CLIP 4.3mm Product description Clip for fixation of LED modules with 4.3 mm holes Fast snap on mounting (sheet thickness.5 1. mm for PUSH-FIX and 1 2 mm for PUSH-FIX Long) For drilling hole 4 mm Clip made of Polycarbonat ACL CLIP 4.3mm PUSH-FIX ACL CLIP 4.3mm PUSH-FIX Long 2.2±.5 ø ±.5 ø9 1.2 ø5.3 ACL CLIP 4.3mm PUSH-FIX ø3.6 ACCES- SORIES BRIDGE LLE24/4 Product description Enables the fixation of 24 mm wide Tridonic LED modules to fixtures made for 4 mm wide modules Ideal for extruded aluminium gear trays made for 4 mm modules with pre-alignment knobs Clip-on for LINEAR COVER and LINEAR LENS 2 For LLE 24 with 28 mm module minimum 2 bridges required 5,8 2,8 For LLE 24 with 56 mm module minimum 3 bridges required 3 ø2,3 24, Fixation via M3 or M4 countersunk screw, max. tightening torque.5 Nm BRIDGE made of white polycarbonate Ordering data ø3.6 ø5.3 ACL CLIP 4.3mm PUSH-FIX Long Type Article number Colour Packaging bag 1 Weight per pc. 1 Minimum sales quantity 5 pcs. ACL CLIP 4.3mm PUSH-FIX White 5 pc(s)..1 kg ACL CLIP 4.3mm PUSH-FIX Long Transparent 5 pc(s)..1 kg 31 Ordering data Type Article number Colour Packaging carton 1 Weight per pc. ACL BRIDGE LLE24/4 SCREW-FIX White 6 Stk..1 kg 1 Minimum sales quantity 6 pcs. 2 Beam characteristics will change due to the elevated fixation (see photometric files for details). 11

12 1. Standards IEC 6231 IEC IEC IEC Thermal design and heat sink The rated life of LED products depends to a large extent on the temperature. If the permissible temperature limits are exceeded, the life of the LLE will be greatly reduced or the LLE may be destroyed. 1.1 Photometric code Key for photometric code, e. g. 83 / st digit 2 nd + 3 rd digit 4 th digit 5 th digit 6 th digit Luminous flux after 25% Code CRI McAdam after of the life-time (max.6h) Colour temperature in McAdam 25% of the Code Luminous flux initial life-time 7 7 % Kelvin x (max.6h) 8 8 % % 1.2 Energy classification Typ LLE G4 24mm ADV 2. Thermal details 2.1 tc point, ambient temperature and life-time The temperature at tp reference point is crucial for the light output and life-time of a LED product. For LLE a tp temperature of 65 C has to be complied in order to achieve an optimum between heat sink requirements, light output and life-time. Compliance with the maximum permissible reference temperature at the tc point must be checked under operating conditions in a thermally stable state. The maximum value must be determined under worst-case conditions for the relevant application. The tc and tp temperature of LED modules from Tridonic are measured at the same reference point. 2.2 Storage and humidity Storage temperature C Energieklassifizierung A++ Operation only in non condensing environment. Humidity during processing of the module should be between to 6 %. 2.4 Heat sink values LLE G4 24x112mm 26lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 7.66 K/W 87 cm² 25 C 65 C 325 ma 4.9 K/W 136 cm² 25 C 65 C 5 ma 2.8 K/W 238 cm² 35 C 65 C 225 ma 5.75 K/W 116 cm² 35 C 65 C 325 ma 3.68 K/W 181 cm² 35 C 65 C 5 ma 2.1 K/W 318 cm² 4 C 65 C 225 ma 4.79 K/W 139 cm² 4 C 65 C 325 ma 3.6 K/W 218 cm² 4 C 65 C 5 ma 1.75 K/W 382 cm² 45 C 65 C 225 ma 3.83 K/W 174 cm² 45 C 65 C 325 ma 2.45 K/W 272 cm² 45 C 65 C 5 ma 1.4 K/W 477 cm² 5 C 65 C 225 ma 2.87 K/W 232 cm² 5 C 65 C 325 ma 1.84 K/W 363 cm² 5 C 65 C 5 ma 1.5 K/W 636 cm² 55 C 65 C 225 ma 1.91 K/W 348 cm² 55 C 65 C 325 ma 1.22 K/W 545 cm² 55 C 65 C 5 ma.7 K/W 955 cm² 6 C 65 C 225 ma.96 K/W 697 cm² 6 C 65 C 325 ma.61 K/W 1,91 cm² 6 C 65 C 5 ma.35 K/W 1,915 cm² LLE G4 24x14mm 325lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 6.32 K/W 15 cm² 25 C 65 C 325 ma 3.97 K/W 168 cm² 25 C 65 C 5 ma 2.27 K/W 293 cm² 35 C 65 C 225 ma 4.74 K/W 141 cm² 35 C 65 C 325 ma 2.97 K/W 224 cm² 35 C 65 C 5 ma 1.7 K/W 391 cm² 4 C 65 C 225 ma 3.95 K/W 169 cm² 4 C 65 C 325 ma 2.48 K/W 269 cm² 4 C 65 C 5 ma 1.42 K/W 469 cm² 45 C 65 C 225 ma 3.16 K/W 211 cm² 45 C 65 C 325 ma 1.98 K/W 336 cm² 45 C 65 C 5 ma 1.14 K/W 587 cm² 5 C 65 C 225 ma 2.37 K/W 281 cm² 5 C 65 C 325 ma 1.49 K/W 449 cm² 5 C 65 C 5 ma.85 K/W 783 cm² 55 C 65 C 225 ma 1.58 K/W 422 cm² 55 C 65 C 325 ma.99 K/W 673 cm² 55 C 65 C 5 ma.57 K/W 1,175 cm² 6 C 65 C 225 ma.79 K/W 845 cm² 6 C 65 C 325 ma.49 K/W 1,348 cm² 6 C 65 C 5 ma.28 K/W 2,356 cm² 12

13 LLE G4 24x112mm 48lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 3.92 K/W 17 cm² 25 C 65 C 325 ma 2.46 K/W 271 cm² 25 C 65 C 5 ma 1.41 K/W 472 cm² 35 C 65 C 225 ma 2.94 K/W 227 cm² 35 C 65 C 325 ma 1.85 K/W 361 cm² 35 C 65 C 5 ma 1.6 K/W 63 cm² 4 C 65 C 225 ma 2.45 K/W 272 cm² 4 C 65 C 325 ma 1.54 K/W 433 cm² 4 C 65 C 5 ma.88 K/W 756 cm² 45 C 65 C 225 ma 1.96 K/W 341 cm² 45 C 65 C 325 ma 1.23 K/W 542 cm² 45 C 65 C 5 ma.71 K/W 945 cm² 5 C 65 C 225 ma 1.47 K/W 454 cm² 5 C 65 C 325 ma.92 K/W 723 cm² 5 C 65 C 5 ma.53 K/W 1,261 cm² 55 C 65 C 225 ma.98 K/W 682 cm² 55 C 65 C 325 ma.61 K/W 1,85 cm² 55 C 65 C 5 ma.35 K/W 1,895 cm² 6 C 65 C 225 ma.49 K/W 1,366 cm² 6 C 65 C 325 ma.31 K/W 2,176 cm² 6 C 65 C 5 ma.18 K/W 3,88 cm² LLE G4 24x112mm 8lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 2.51 K/W 265 cm² 25 C 65 C 325 ma 1.46 K/W 455 cm² 25 C 65 C 5 ma.93 K/W 721 cm² 35 C 65 C 225 ma 1.88 K/W 354 cm² 35 C 65 C 325 ma 1.1 K/W 67 cm² 35 C 65 C 5 ma.69 K/W 961 cm² 4 C 65 C 225 ma 1.57 K/W 425 cm² 4 C 65 C 325 ma.91 K/W 729 cm² 4 C 65 C 5 ma.58 K/W 1,154 cm² 45 C 65 C 225 ma 1.26 K/W 531 cm² 45 C 65 C 325 ma.73 K/W 912 cm² 45 C 65 C 5 ma.46 K/W 1,444 cm² 5 C 65 C 225 ma.94 K/W 78 cm² 5 C 65 C 325 ma.55 K/W 1,217 cm² 5 C 65 C 5 ma.35 K/W 1,927 cm² 55 C 65 C 225 ma.63 K/W 1,63 cm² 55 C 65 C 325 ma.36 K/W 1,828 cm² 55 C 65 C 5 ma.23 K/W 2,898 cm² 6 C 65 C 225 ma.31 K/W 2,133 cm² 6 C 65 C 325 ma.18 K/W 3,673 cm² 6 C 65 C 5 ma.11 K/W 5,84 cm² LLE G4 24x14mm 6lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 3.13 K/W 213 cm² 25 C 65 C 325 ma 1.98 K/W 337 cm² 25 C 65 C 5 ma 1.13 K/W 589 cm² 35 C 65 C 225 ma 2.35 K/W 284 cm² 35 C 65 C 325 ma 1.48 K/W 449 cm² 35 C 65 C 5 ma.85 K/W 786 cm² 4 C 65 C 225 ma 1.96 K/W 34 cm² 4 C 65 C 325 ma 1.24 K/W 539 cm² 4 C 65 C 5 ma.71 K/W 943 cm² 45 C 65 C 225 ma 1.57 K/W 426 cm² 45 C 65 C 325 ma.99 K/W 674 cm² 45 C 65 C 5 ma.57 K/W 1,18 cm² 5 C 65 C 225 ma 1.17 K/W 568 cm² 5 C 65 C 325 ma.74 K/W 889 cm² 5 C 65 C 5 ma.42 K/W 1,574 cm² 55 C 65 C 225 ma.78 K/W 852 cm² 55 C 65 C 325 ma.49 K/W 1,35 cm² 55 C 65 C 5 ma.28 K/W 2,365 cm² 6 C 65 C 225 ma.39 K/W 1,77 cm² 6 C 65 C 325 ma.25 K/W 2,77 cm² 6 C 65 C 5 ma.14 K/W 4,753 cm² LLE G4 24x14mm 1lm 8x ADV ta tp Forward current Rth, hs-a Cooling area 25 C 65 C 225 ma 2.8 K/W 32 cm² 25 C 65 C 325 ma 1.2 K/W 554 cm² 25 C 65 C 5 ma.76 K/W 879 cm² 35 C 65 C 225 ma 1.56 K/W 427 cm² 35 C 65 C 325 ma.9 K/W 739 cm² 35 C 65 C 5 ma.57 K/W 1,173 cm² 4 C 65 C 225 ma 1.3 K/W 513 cm² 4 C 65 C 325 ma.75 K/W 887 cm² 4 C 65 C 5 ma.47 K/W 1,48 cm² 45 C 65 C 225 ma 1.4 K/W 641 cm² 45 C 65 C 325 ma.6 K/W 1,19 cm² 45 C 65 C 5 ma.38 K/W 1,761 cm² 5 C 65 C 225 ma.78 K/W 855 cm² 5 C 65 C 325 ma.45 K/W 1,48 cm² 5 C 65 C 5 ma.28 K/W 2,351 cm² 55 C 65 C 225 ma.52 K/W 1,283 cm² 55 C 65 C 325 ma.3 K/W 2,223 cm² 55 C 65 C 5 ma.19 K/W 3,535 cm² 6 C 65 C 225 ma.26 K/W 2,574 cm² 6 C 65 C 325 ma.15 K/W 4,467 cm² 6 C 65 C 5 ma.9 K/W 7,121 cm² Notes The actual cooling surface can differ because of the material, the structural shape, outside influences and the installation situation. Depending on the heat sink a heat conducting paste or heat conducting film might be necessary to keep the specified tp temperature. 13

14 3. Installation / wiring 3.1 Electrical supply/choice of LED Driver LLE modules from Tridonic are not protected against overvoltages, overcurrents, overloads or short-circuit currents. Safe and reliable operation can only be guaranteed in conjunction with a LED Driver which complies with the relevant standards. The use of LED Driver from Tridonic in combination with LLE modules guarantees the necessary protection for safe and reliable operation. If a LED Driver other than Tridonic is used, it must provide the following protection: Short-circuit protection Overload protection Overtemperature protection LLE modules must be supplied by a constant current LED Driver. Operation with a constant voltage LED Driver will lead to an irreversible damage of the module. Wrong polarity can damage the LLE. LLE can be operated either from SELV LED Drivers or from LED Drivers with LV output voltage. LLE are basic isolated up to 335 V (if mounted with M4 screws with head diameter 7 mm in combination with plastic washers) against ground and can be mounted directly on earthed metal parts of the luminaire. If the max. output voltage of the LED Driver (also against earth) is above 335 V, an additional isolation between LED module and heat sink is required (for example by isolated thermal pads) or by a suitable luminaire construction. At voltages > 6 V an additional protection against direct touch (test finger) to the light emitting side of the module has to be guaranteed. This is typically achieved by means of a non removable light distributor over the module. 3.4 Mounting instruction None of the components of the LLE (substrate, LED, electronic components etc.) may be exposed to tensile or compressive stresses. Max. torque for fixing:.5 Nm. The LED modules are mounted onto a heat sink with min. 9 screws per 1,12 mm module and min. 11 screws per 1,4 mm module or ACL CLIP 4.3mm. Always use the most outside mounting holes. Extensive bending of the module during mounting must be avoided. Chemical substance may harm the LED module. Chemical reactions could lead to colour shift, reduced luminous flux or a total failure of the module caused by corrosion of electrical connections. Materials which are used in LED applications (e.g. sealings, adhesives) must not produce dissolver gas. They must not be condensation curing based, acetate curing based or contain sulfur, chlorine or phthalate. Avoid corrosive atmosphere during usage and storage. 3.5 EOS/ESD safety guidelines The device / module contains components that are sensitive to electrostatic discharge and may only be installed in the factory and on site if appropriate EOS/ESD protection measures have been taken. No special measures need be taken for devices/modules with enclosed casings (contact with the pc board not possible), just normal installation practice. Please note the requirements set out in the document EOS / ESD guidelines (Guideline_EOS_ESD.pdf) at: Wiring in + out Wiring examples L N + LCA 35W 15-7mA one4all lp PRE 3.3 Wiring type and cross section The wiring can be in stranded wires or solid with a cross section of.2 to.75 mm². For the push-wire connection you have to strip the insulation (8 9 mm). wire preparation:.2.75 mm² 8 9 mm To remove the wires use a suitabel tool (e.g. Microcon release pin) or through twist and pull. 14

15 4. Life-time 4.2 Lumen maintenance for LLE G4 24mm ADV 4.1 Life-time, lumen maintenance and failure rate The light output of an LED Module decreases over the life-time, this is characterized with the L value. L7 means that the LED module will give 7 % of its initial luminous flux. This value is always related to the number of operation hours and therefore defines the life-time of an LED module. As the L value is a statistical value and the lumen maintenace may vary over the delivered LED modules. The B value defines the amount of modules which are below the specific L value, e.g. L7B1 means 1 % of the LED modules are below 7 % of the inital luminous flux, respectivly 9 % will be above 7 % of the initial value. In addition the percentage of failed modules (fatal failure) is characterized by the C value. The F value is the combination of the B and C value. That means for F degradation and complete failures are considered, e.g. L7F1 means 1 % of the LED modules may fail or be below 7 % of the initial luminous flux. Forward current 1 ma 15 ma 2 ma 225 ma 275 ma 325 ma 4 ma 45 ma 5 ma tp temperature L9 / F1 L9 / F5 L8 / F1 L8 / F5 L7 / F1 L7 / F5 45 C 38, h 43, h >6, h >6, h >6, h >6, h 55 C 35, h 4, h >6, h >6, h >6, h >6, h 65 C 3, h 34, h >6, h >6, h >6, h >6, h 75 C 26, h 29, h 54, h >6, h >6, h >6, h 45 C 37, h 43, h >6, h >6, h >6, h >6, h 55 C 34, h 38, h >6, h >6, h >6, h >6, h 65 C 29, h 32, h 58, h >6, h >6, h >6, h 75 C 25, h 28, h 51, h 57, h >6, h >6, h 45 C 37, h 42, h >6, h >6, h >6, h >6, h 55 C 33, h 37, h >6, h >6, h >6, h >6, h 65 C 28, h 31, h 55, h >6, h >6, h >6, h 75 C 23, h 26, h 48, h 54, h >6, h >6, h 45 C 37, h 42, h >6, h >6, h >6, h >6, h 55 C 32, h 37, h >6, h >6, h >6, h >6, h 65 C 27, h 3, h 54, h >6, h >6, h >6, h 75 C 23, h 25, h 46, h 52, h >6, h >6, h 45 C 36, h 41, h >6, h >6, h >6, h >6, h 55 C 31, h 36, h >6, h >6, h >6, h >6, h 65 C 26, h 29, h 51, h 59, h >6, h >6, h 75 C 21, h 24, h 43, h 48, h >6, h >6, h 45 C 36, h 41, h >6, h >6, h >6, h >6, h 55 C 3, h 34, h 58, h >6, h >6, h >6, h 65 C 25, h 27, h 48, h 56, h >6, h >6, h 75 C 2, h 22, h 4, h 45, h >6, h >6, h 45 C 36, h 4, h >6, h >6, h >6, h >6, h 55 C 29, h 33, h 55, h >6, h >6, h >6, h 65 C 23, h 25, h 44, h 51, h >6, h >6, h 75 C 18, h 19, h 35, h 4, h 59, h >6, h 45 C 35, h 4, h >6, h >6, h >6, h >6, h 55 C 28, h 32, h 53, h 6, h >6, h >6, h 65 C 21, h 23, h 41, h 48, h >6, h >6, h 75 C 16, h 18, h 32, h 36, h 54, h >6, h 45 C 35, h 39, h >6, h >6, h >6, h >6, h 55 C 27, h 3, h 51, h >6, h >6, h >6, h 65 C 2, h 22, h 38, h 44, h >6, h >6, h 75 C 15, h 16, h 29, h 32, h 49, h 56, h 15

16 5. Electrical values 5.1 Declaration of electrical parameters Irated... Nominal operating current the module is designed for. Imax... Max. permissible continuous operating current incl. The tolerances of the LED driver. Max. permissible LF current ripple... Max. output current of the LED driver incl. Tolerances and LF current ripple must not exceed this value. Max. permissible peak current... The max. output peak current of the LED driver must not exceed this value. 5.2 Typ. forward voltage vs. forward current LLE G4 24x112mm 26lm 8x ADV 5 LLE G4 24x14mm 325lm 8x ADV Forward current [ma] 3 2 Forward current [ma] Forward voltage [V] Forward voltage [V] 61 LLE G4 24x112mm 48lm 8x ADV 5 LLE G4 24x14mm 6lm 8x ADV Forward current [ma] 3 2 Forward current [ma] ,5 84,5 86,5 88,5 9,5 92,5 94,5 Forward voltage [V] 96, Forward voltage [V]

17 LLE G4 24x112mm 8lm 8x ADV 5 LLE G4 24x14mm 1lm 8x ADV Forward current [ma] 3 2 Forward current [ma] ,5 128,5 133,5 138,5 Forward voltage [V] 143,5 154,5 159,5 164,5 169,5 174,5 Forward voltage [V] 179,5 5.3 Forward voltage vs. tc temperature 1,15 Rel. forward voltage [%] 1,1 1,5 1,, tc [ C] The diagrams are based on statistic values. The real values can be different. 17

18 6. Photometric charcteristics 6.1 Coordinates and tolerances according to CIE 1931 The specified colour coordinates are integral measured by current impulse of 325 ma and a duration of 1 ms. The ambient temperature of the measurement is ta = 25 C. The measurement tolerance of the colour coordinates are ±.1. 3, K x y Centre ,425,42, ,41,45,4,395,39 norm. intensity [%] 6 4 2,385,415,42,425,43,435,44,445 MacAdam Ellipse: 3SDCM,45, wave length [nm] 4, K x y Center ,4,395,39 1 8,385,38,375,37,365 norm. intensity [%] 6 4 2,36,36,365,37,375,38,385,39 MacAdam Ellipse: 3SDCM,395, wave length [nm] 18

19 6.2 Light distribution 6.4 Relative luminous flux vs. operating current The optical design of the LLE product line ensures optimum homogenity for the light distribution. relative intensity Iv/Iv, max Rel. luminous [%] Operating current [ma] 4 5 The colour temperature is measured integral over the complete module. The single LED light points can have deviations in the colour coordinates within MacAdam 3. To ensure an ideal mixture of colours and a homogenious light distribution a suitable optic (e. g. PMMA diffuser) and a sufficient spacing between module and optic (typ. 4 cm) should be used. 6.3 Relative luminous flux vs. tc temperature 1,2 The diagrams are based on statistic values. The real values can be different. 7. Miscellaneous 7.1 Additional information Additional technical information at Technical Data Guarantee conditions at Services Life-time declarations are informative and represent no warranty claim. rel. luminous flux [a.u.] 1,1 1,,9, tc [ C]