Capacitance Rated Voltage (VDC) 3 = 25 5 = 50 1 = = 200 A = 250

Transcription

1 Radial Leaded Multilayer Ceramic Capacitors Goldmax, 300 Series, Conformally Coated, X7R Dielectric, VDC (Commercial Grade) Overview KEME s Goldmax conformally coated radial leaded ceramic capacitors in X7R dielectric feature a 25 C maximum operating temperature. he Electronics Industries Alliance (EIA) characterizes X7R dielectric as a Class II "temperature stable" material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. change is limited to ±5% from 55 C to +25 C. hese devices meets the flame test requirements outlined in UL Standard 94V 0. Benefits Radial leaded form factor Conformally coated 0.00", 0.200", 0.250" and 0.400" lead spacing 55 C to +25 C operating temperature range Lead (Pb)-free, RoHS and REACH compliant X7R temperature stable dielectric Click image above for interactive 3D content Ordering Information C 320 C 06 Ceramic Style/Size Specification/ Series Code (p) Open PD in Adobe Reader for full functionality C= Standard K 3 R Rated Voltage Dielectric olerance (VDC) irst two digits J = ±5% represent K = ±0% significant M = ±20% figures. hird digit specifies number of zeros. 3 = 25 5 = 50 = 00 2 = 200 A = 250 R= X7R 5 Design Lead inish2 5= Multilayer A = 00% Matte Sn H = SnPb (60/40) 730 ailure Packaging Rate (C-Spec) A= N/A See "Packaging C-Spec Ordering Options able" below Additional capacitance tolerance offerings may be available. Contact KEME for details. Lead materials: Standard: 00% matte tin (Sn) with nickel (Ni) underplate and steel core ( designation). Alternative : 60% tin (Sn)/40% lead (Pb) finish with copper-clad steel core ( H designation). Alternative 2: 60% tin (Sn)/40% lead (Pb) finish with 00% copper core (available with H designation code with C-Spec). Contact KEME for C-Spec details. One world. One KEME KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207

2 Benefits cont'd DC voltage ratings of 25 V, 50 V, 00 V, 200 V and 250 V offerings ranging from 00 p to 0 μ Available capacitance olerances of ±5%, ±0% and ±20% Non-polar device, minimizing installation concerns 00% pure matte tin-plated lead finish allowing for excellent solderability SnPb-plated lead finish option available upon request (Sn60/Pb40) Encapsulation meets flamability standard UL 94V 0 Applications ypical applications include decoupling, bypass, filtering and transient voltage suppression. Application Notes hese devices are not recommended for use in overmold applications and/or processes. Packaging C-Spec Ordering Options able Bulk Bag Packaging ype Packaging/Grade Ordering Code (C-Spec) Not required (Blank) 2" ape & Reel (6.0 ± 0.5 mm lead length) 730 2" ape & Reel (8.0 mm minimum lead length) 7303 Ammo Pack (6.0 ± 0.5 mm lead length) 7305 Ammo Pack (8.0 mm minimum lead length) 737 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. Bulk bag option is required for Size/Style C32 and C33. "ape and Reel" packaging option is not available for Size/Style C32 and C33. or more information see "Packaging Quantities". "Ammo Pack" packaging option is not available for Size/Style C32, C33, C350 and C356. or more information see "Packaging Quantities". "Ammo Pack" and "ape and Reel" packaging options have the same lead tape configuration. or more information see "ape & Reel Packaging Information". Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in able 2, Performance & Reliability. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 2

3 Dimensions Inches (Millimeters) Shoulder Bend (Short) Shoulder Bend (all) Inside Kink Straight L L L L C37 C32 C322 C330* C33* C340* C350 H C38 C323 C328 H C333 H C340: 0.0 max (2.54 mm) C35 C320 C330* C33* C340* H Seating Plane S LL Seating Plane S LL Seating Plane S LL All Others: 0.06 max (.52 mm) S LL Outside Kink Snap-In ype 2 Snap-In ype L L L C36 C326 C327 C336 C346 C356 H C324 H C325 C335 H Seating Plane S E Series C3X C32X C3X C32X C33X C34X C35X LL Style / Size Seating Plane S E S Lead Spacing ±0.030 (0.78) LL L Length Maximum Seating Plane S LL H Height Maximum * May be supplied in a Shoulder Bend or Straight Lead configuration. Please see Range Waterfall section of this document to determine lead configuration availability by capacitance value. hickness Maximum Lead Diameter (0.0), 0.00 (0.025) LL Lead Length Minimum (3.8) 0.20 (3.4) 0.00 (2.54) (7.00) (3.8) (5.84) 0.00 (2.54) (5.08) (2.54) (5.08) (5.84) 0.25 (3.8) (7.00) (5.08) (5.84) 0.25 (3.8) (7.00) (5.08) (7.62) 0.25 (3.8) (5.08) (3.8) (5.08) 0.00 (2.54) (7.00) (5.08) (3.8) (5.97) 0.00 (2.54) (7.00) (6.35) (5.08) (6.60) 0.25 (3.8) (7.00) (5.08) (6.60) 0.25 (3.8) (7.00) (5.08) (7.62) 0.25 (3.8) (7.00) (0.5) (5.08) (7.62) 0.25 (3.8) (7.00) (5.08) (5.08) (7.62) 0.25 (3.8) (7.00) (5.08) (8.3) 0.25 (3.8) (5.08) (7.) (9.4) 0.60 (4.07) (7.00) (6.35) (7.) (9.4) 0.60 (4.07) (7.00) (7.) (0.6) 0.60 (4.07) (7.00) (7.) (0.6) 0.60 (4.07) (7.00) (5.08) (7.) (0.6) 0.60 (4.07) (5.08) (7.36) (0.6) 0.60 (4.07) (7.00) (7.36) (0.6) 0.60 (4.07) (5.08) (8.38) (0.6) (5.08) (7.00) (0.6) (0.64) (8.38) (0.6) (5.08) (5.08) hickness maximum () = 0.60" (4.07 mm) for capacitance values greater than or equal to 4.7 µ KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 3

4 Environmental Compliance Lead (Pb)-free, REACH and RoHS compliant without exemptions when ordered with a 00% tin (Sn) wire lead finish. Product ordered with tin/ lead (Sn60/Pb40) wire lead finish do not meet RoHS criteria. Series 300 (C3XX) ermination inish (Wire Lead) RoHS Compliant RoHS Exemption Code REACH Compliant Halogen ree 00% Matte Sn Yes n/a Yes Yes Sn60/Pb40 No n/a Yes Yes REACH compliance indicates product does not contain Substance/s of Very High Concern (SVHC) Electrical Parameters/Characteristics Item Operating emperature Range Change with Reference to +25 C and 0 VDC Applied (CC) 55 C to +25 C ±5% Aging Rate (Maximum % Cap Loss/Decade Hour) 3.0% Dielectric Withstanding Voltage Dissipation actor (D) Maximum Limit at 25ºC Insulation Resistance (IR) Limit at 25 C Parameters/Characteristics 250% of rated voltage (5± second and charge/discharge not exceeding 50 ma at 25ºC) See Dissipation actor Limit able See Insulation Resistance Limit able (Rated voltage applied for 20±5 seconds at 25 C) Regarding Aging Rate: measurements (including tolerance) are indexed to a referee time of 48 or,000 Hours. Please refer to a part number specific datasheet for referee time details. o obtain IR limit, divide MΩ-µ value by the capacitance and compare to GΩ limit. Select the lower of the two limits. and dissipation factor (D) measured under the following conditions: khz ±50 Hz and.0 ±0.2 V rms Note: When measuring capacitance it is important to ensure the set voltage level is held constant. he HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). he ALC feature should be switched to "ON." Insulation Resistance Limit able Style/Size,000 megohm microfarads or 00GΩ 500 megohm microfarads or 0GΩ 00 Megohm Microfarads or 0GΩ C3X < 0.2 μ 0.2 μ NA C32X < 0.8 μ NA 0.8 μ C33X < 0.8 μ NA 0.8 μ C34X <.20 μ.20 μ NA C35X < 2.70 μ 2.70 μ NA KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 4

5 Post Environmental Limits Style/Size High emperature Life, Biased Humidity and Storage Life Rated DC Voltage Value Dissipation actor (Maximum %) 25 All 5.0 Shift Insulation Resistance C3X > 25 <.0 μ μ 20.0 C32X, C33X, C34X 25 < 2.2 μ 5.0 > 25 < 2.2 μ / μ 20.0 ±20% 0% of Initial Limit C35X All > Dissipation actor (D) Limit able Style/Size Rated DC Voltage Rated Dissipation actor (Maximum %) 25 All 3.5 C3X > 25 >.0 μ μ < 2.2 μ 3.5 C32X, C33X, C34X > 25 < 2.2 μ / μ 0.0 C35X All > KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 5

6 able A C3X Style/Size, Range Waterfall C35, C36, C37, C38 Style/Size (0.00" and 0.200" Lead Spacing) olerance Code (Available ) 00p p p p p p p p p p p p p p p p p p p p p p p J = ±5% 8200p K = ±0% 0.0µ M = ±20% 0.02µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ 05 05* * Only available on K and M tolerances. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 6

7 able B C32X Style/Size, Range Waterfall C320, C322, C323, C326, C328 Style/Size (0.00" and 0.200" Lead Spacing) olerance Code (Available ) 00p p p p p p p p p p p p p p p p p p p p p p p p µ µ J = ±5% µ K = ±0% µ M = ±20% µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ 225* 225* * Only available on K and M tolerances. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 7

8 able B C32X Style/Size, Range Waterfall cont'd C320, C322, C323, C326, C328 Style/Size (0.00" and 0.200" Lead Spacing) olerance 2.7µ µ µ J = ±5% µ K = ±0% 475¹ 475¹ 5.6µ M = ±20% 565¹ 6.8µ 685¹ 0µ 06¹ Code (Available ) ¹ hickness maximum () = 0.60" (4.07 mm) for capacitance values greater than or equal to 4.7 µ able C C32X Style/Size, Range Waterfall C32, C324, C325, C327 Style/Size (0.00", 0.200" and 0.250" Lead Spacing) olerance Code (Available ) 00p p p p p p p p p p p p p J = ±5% 200p K = ±0% 500p M = ±20% 800p p p p p p p p p µ µ µ µ KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 8

9 able C C32X Style/Size, Range Waterfall cont'd C32, C324, C325, C327 Style/Size (0.00", 0.200" and 0.250" Lead Spacing) olerance Code (Available ) 0.022µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ J = ±5% 0.39µ K = ±0% 0.47µ M = ±20% 0.56µ µ µ µ µ µ µ µ 225* 225* 2.7µ µ µ µ 475¹ 475¹ 5.6µ 565¹ 6.8µ 685¹ 0µ 06¹ 0 * Only available on K and M tolerances. ¹ hickness maximum () = 0.60" (4.07 mm) for capacitance values greater than or equal to 4.7 µ KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 9

10 able D C33X Style/Size, Range Waterfall C330, C33, C333, C335, C336 Style/Size (0.200" and 0.250" Lead Spacing) olerance Code (Available ) 4700p 472* 472* 472* 472* 472* 5600p 562* 562* 562* 562* 562* 6800p 682* 682* 682* 682* 682* 8200p 822* 822* 822* 822* 822* 0.0µ 03* 03* 03* 03* 03* 0.02µ 23* 23* 23* 23* 23* 0.05µ 53* 53* 53* 53* 53* 0.08µ 83* 83* 83* 83* 83* 0.022µ 223* 223* 223* 223* 223* 0.027µ 273* 273* 273* 273* 273* 0.033µ 333* 333* 333* 333* 333* 0.039µ 393* 393* 393* 393* 393* 0.047µ 473* 473* 473* 473* 473* 0.056µ 563* 563* 563* 563* 563* 0.068µ 683* 683* 683* 683* 683* 0.082µ J = ±5% 823* 823* 823* 823* 823* 0.µ K = ±0% 04* 04* 04* 04* 04* 0.2µ M = ±20% 24* 24* 24* 24* 24* 0.5µ 54* 54* 54* 54* 54* 0.8µ 84* 84* 84* µ 224* 224* 224* µ 274* 274* 274* µ 334* 334* 334* µ 394* 394* 394* µ 474* 474* 474* µ 564* 564* 564* µ 684* 684* 684* µ 824* 824* 824* µ 05* 05* 05* µ 25* 25* µ 55* 55*.8µ 85* 85* 2.2µ 225* 225* * Capacitor is supplied with a "Shoulder-Bend" lead configuration in Style/Size C330 and C33. Bold text denotes only available on K and M tolerances. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 0

11 able E C34X Style/Size, Range Waterfall C340, C346 Style/Size (0.200" Lead Spacing) olerance Code (Available ) 0.068µ 683* 683* 683* 683* 683* 0.082µ 823* 823* 823* 823* 823* 0.µ 04* 04* 04* 04* 04* 0.2µ 24* 24* 24* 24* 24* 0.5µ 54* 54* 54* 54* 54* 0.8µ 84* 84* 84* µ 224* 224* 224* µ 274* 274* 274* µ 334* 334* 334* µ 394* 394* 394* µ 474* 474* 474* µ 564* 564* 564* µ J = ±5% 684* 684* 684* µ K = ±0% 824* 824* 824* µ M = ±20% 05* 05* 05* µ 25* 25* µ 55* 55* 55.8µ 85* 85* µ 225* 225* µ µ µ µ µ µ µ µ * Capacitor is supplied with a "Shoulder-Bend" lead configuration in Style/Size C340. Bold text denotes only available on K and M tolerances. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207

12 able C35X Style/Size, Range Waterfall C350, C356 Style/Size (0.400" Lead Spacing) olerance Code (Available ) 0.8µ µ µ µ µ µ µ µ µ µ J = ±5%.2µ K = ±0%.5µ M = ±20%.8µ µ µ µ µ µ µ µ µ µ KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 2

13 Soldering Process Recommended Soldering Methods: Solder Wave Hand Soldering (Manual) Recommended Soldering Profile: Optimum Wave Solder Profile Degrees Cº lux Zone Entrance to Solder Machine Entrance to Solder Wave Preheat Zone Bottom Side emperature Range 80ºC to 20ºC Solder Wave Peak emperature 260ºC op Side Nominal 2 3 ime (Minutes) Exit from Solder Wave (ime in Wave 2 to 4 Seconds) 50ºC Maximum Hot Air Debridging ree Air Cool Exit from Solder Machine Entrance to In-Line Cleaner Exit from In-Line Cleaner (time in cleaner may be less) Immersion in Cleaning Vapor Mounting All encased capacitors will pass the Resistance to Soldering Heat of MIL-SD-202, Method 20, Condition C. his test simulates wave solder topside board mount product. his demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. he above figure is a recommended solder wave profile for both axial and radial leaded ceramic capacitors. Hand Soldering (Manual) Manual Solder Profile with Pre-heating Soldering Gradual Cooling Delta < = 20ºC Gradual Preheat Seconds Recommend 2.5ºC/second Maximum 3 seconds KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 3

14 able 2 Performance & Reliability: est Methods and Conditions Stress Reference est or Inspection Method Solderability J SD 002 Magnification 50X. Conditions: a) Method A, at 235 C, Category 3 emperature Cycling JESD22 Method JA 04 5 cycles ( 55 C to +25 C), measurement at 24 hours +/ 4 hours after test conclusion. Biased Humidity Moisture Resistance hermal Shock High emperature Life Storage Life Vibration Resistance to Soldering Heat erminal Strength Mechanical Shock Resistance to Solvents /EIA Load humidity,,000 hours 85 C/85%RH and rated voltage. Add 00 K ohm resistor. Measurement at 24 hours +/ 4 hours after test conclusion. Low volt humidity,,000 hours 85C /85%RH and.5 V. Add 00 K ohm resistor. Measurement at 24 hours +/ 4 hours after test conclusion. t = 24 hours/cycle. Steps 7a & 7b not required. Unpowered. Measurement at 24 hours +/ 4 hours after test conclusion. 55ºC to +25 C. Note: Number of cycles required 300. Maximum transfer time 20 seconds. Dwell time 5 minutes. Air Air.,000 hours at 25 C (85 C for Z5U) with X rated voltage applied. 25 C, 0 VDC for,000 hours. 5 g for 20 minutes, 2 cycles each of 3 orientations. Note: Use 8"X5" PCB.03" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. est from Hz. Condition B. No preheat of samples. Note: single wave solder procedure 2. Conditions A (454g), Condition C (227g) igure of Method 23, Condition C. Add aqueous wash chemical OKEM Clean or equivalent. Storage & Handling he un-mounted storage life of a leaded ceramic capacitor is dependent upon storage and atmospheric conditions as well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite robust in most environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature and exposure to direct sunlight reels may soften or warp, and tape peel force may increase. KEME recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight, and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. or optimum solderability, capacitor stock should be used promptly, preferably within 8 months of receipt. or applications requiring pre-tinning of components, storage life may be extended if solderability is verified. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. KEME recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 4

15 Construction Epoxy Encapsulation inish Layer (Sn) Barrier Layer (Ni) Base Metal (Cu) Lead Attach Solder (95Sn/5Ag) Detailed Cross Section Lead Attach Solder (95Sn/5Ag) inish Layer (Sn) Inner Electrodes (Ni) Base Metal (Cu) Barrier Layer (Ni) Core Metal Barrier Layer inish Layer Dielectric Material (BaiO 3 ) Lead Wire Std Alt Steel Ni Cu 00% 60% Sn Matte Sn 40% Pb Alt 2 Cu 60% Sn 40% Pb Inner Electrodes (Ni) Epoxy Encapsulation Marking KEME ID Rated Voltage Code SYLE/SIZE C3X, C32X olerance Code Rated Code SYLE/SIZE C33X, C34X, C35X SYLE/SIZE C34X, C35X Available as an option only KEME ID Rated Dielectric Voltage Code Code Date Code Rated Code K5R 04K olerance Code 520 ront Back ront Back o properly request the inclusion of the date code in the marking information provided on the component, ordering code C-SPEC 9207 must be added to the end of the ordering code. Date Code 5 20 Manufacturing Year: 5 = 205 Manufacturing Week: 20 = Week 20 (of mfg. calendar year) KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 5

16 Packaging Quantities Style/ Size Standard Bulk Quantity 500/Bag Ammo Pack Quantity Maximum Reel Quantity Maximum (2" Reel) N/A N/A /Bag N/A N/A /Bag /Bag N/A 500 KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 6

17 ape & Reel Packaging Information KEME offers standard reeling of Molded and Conformally Coated Radial Leaded Capacitors in accordance with EIA standard 468. Parts are taped to a tagboard carrier strip, and wound on a reel as shown in igure. Kraft paper interleaving is inserted between the layers of capacitors on the reel. Ammopack is also available, with the same lead tape confi guration and package quantities. t Ceramic Radial ape and Reel Dimensions Metric will govern D 0 ±0.2 (0.008) P 0 ±0.3 (0.02) H ±0.2 (0.008) Constant Dimensions Millimeters (Inches) L Maximum t ±0.2 (0.008) Maximum W +.0/ 0.5 (+0.039/ 0.020) W 0 Minimum W 2 Maximum 4.00 (0.57) 2.7 (0.500) 4.0 (0.57).0 (0.039) 0.7 (0.05).5 (0.059) 8.0 (0.709) 5.0 (0.97) 3.0 (0.8) KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 7

18 Ceramic Radial ape and Reel Dimensions cont'd Metric will govern Variable Dimensions Millimeters (Inches) P P ±0.78 (0.030) ±0.30 (0.02) ±0.3 (0.02) P 2 ±.3 (0.5) 2.54 (0.00) 5.08 (0.200) 2.7 (0.500) 6.35 (0.250) H H 0 Straight Lead Confi guration ormed Lead Confi guration 2 Packaging C-Spec 3 730/ / / / (0.70) 3.89 (0.53) 2.7 (0.500) 6.35 (0.250) 5.08 (0.200) 3.8 (0.50) 2.7 (0.500) 6.35 (0.250) 5.59 (0.220) 3.25 (0.28) 2.7 (0.500) 6.35 (0.250) 6.98 (0.275) 2.54 (0.00) 2.7 (0.500) 6.35 (0.250) 7.62 (0.300) 2.24 (0.088) 2.7 (0.500) 6.35 (0.250) 9.52 (0.375) 7.62 (0.300) 2.7 (0.500) 6.35 (0.250) 6.0±0.5 (0.630±0.020) 8.0 (0.709) Minimum 6.0±0.5 (0.630±0.020) 8.0 (0.709) Minimum 0.6 (0.400) 7.34 (0.290) 25.4 (.000) N/A 2.06 (0.475) 6.35 (0.250) 25.4 (.000) N/A 4.60 (0.575) 5.08 (0.200) 25.4 (.000) N/A 7.4 (0.675) 3.8 (0.5) 25.4 (.000) N/A Measured at the egress from the carrier tape, on the component side. 2 ormed lead confi guration includes: "shoulder bend", "inside kink", "outside kink", and "snap-in". or more information regarding available lead confi gurations see "Dimensions" section of this document. 3 he "Packaging C-Spec" is a 4 digit code which identifi es the packaging type, lead length and/or lead material. When ordering, the proper code must be included in the 5th through 8th character positions of the ordering code. See "Ordering Information" section of this document for further details. D 0 P 0 P P P 2 H H 0 H H L t W W 0 W 2 Symbol Reference able Sprocket Hole Diameter Sprocket Hole Pitch Component Pitch Lead Spacing Sprocket Hole Center to Lead Center Sprocket Hole Center o Component Center Height to Seating Plane (Straight Leads Only) Height to Seating Plane (ormed Leads Only) Component Height Above ape Center Component Alignment Lead Protrusion Composite ape hickness Carrier ape Width Hold-Down ape Width Hold-Down ape Location KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 8

19 KEME Electronic Corporation Sales Offices or a complete list of our global sales offi ces, please visit Disclaimer All product specifi cations, statements, information and data (collectively, the Information ) in this datasheet are subject to change. he customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEME Electronics Corporation s ( KEME ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEME specifi cally disclaims any warranty concerning suitability for a specifi c customer application or use. he Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEME with reference to the use of KEME s products is given gratis, and KEME assumes no obligation or liability for the advice given or results obtained. Although KEME designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEME is a registered trademark of KEME Electronics Corporation. KEME Electronics Corporation P.O. Box 5928 Greenville, SC C050_GOLDMAX_X7R /0/207 9