MATERIAL CHARACTERISTICS
|
|
|
- Shona Rich
- 6 years ago
- Views:
Transcription
1 MATERIAL CHARACTERISTICS
2 Introduction Introduction Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd T elephone QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD. About QINGDAO EWIC
3 Material selection We produce and supply Ni-Zn ferrite calcined powder and granule, which can be useed as raw materials for ferrite products ; EMI supressor cores, Choke/Linearity cores, Low loss cores for tramsformer and Magnetic shields/absorbing cores. EMI / RFI - Ni-Zn series : QN-20, QN-15, QN-15E, QN-, QN-08, QN-08B, QN-06 - Mg-Zn series : QM-05, QM-07 Choke / Linearity / IFT - QN-08B, QN-06, QN-04, QN-03B, QN-C4 Loss loss for transformer - QN-12L Material selection and Process Material selection and Process Magnetic shields / Absorbing - QN-25, QN-20 Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd T elephone QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD. Process
4 RoHS Statement of RoHS Compliance All products as supplied by QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD. do not contain the Hazardous Substance as described by EU Directive 2002/95/EC. These Hazardous Substance encompass the following items: - Lead(Pb - Mercury(Hg - Cadmium(Cd - Hexavalent Chromium(Cr6+ - Polybrominated biphenyls(pbb or - Polybrominated diphenyl ethers(pbde Our company inspects the Hazardous Substance of raw material and products by ICP. Only the product which passes it takes stamp "RoHS COMPLIANT". All products as supplied by QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD. are compliant with RoHS. September 28, 2006 Lee, Woo-Chul Manager of Quality Control Section Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd RoHS QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
5 MATERIAL CHARACTERISTICS I ( 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd Ferrite Materials QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
6 MATERIAL CHARACTERISTICS II ( 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd Ferrite Materials QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
7 MATERIAL CHARACTERISTICS III ( 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd Ferrite Materials QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
8 MATERIAL CHARACTERISTICS IV ( 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd Ferrite Materials QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
9 iac iac QN-25 Initial permeability, iac 2500 Saturation flux density (1194A/m, Bs mt 250 Remanence, Br mt 5 Coercivity, Hc A/m 5 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, Value(Typical r X -6 %/ 0~3 Curie temperature, Tc >90 Resistivity, Mm> Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-25 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
10 iac iac QN-20 Initial permeability, iac 2000 Saturation flux density (1194A/m, Bs mt 260 Remanence, Br mt 1 Coercivity, Hc A/m 6 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, Value(Typical r X -6 %/ 1~4 Curie temperature, Tc >0 Resistivity, Mm> Frequency (khz Temperature ( H(A/m Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-20 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
11 iac iac QN-15 Initial permeability, iac 1500 Saturation flux density (1194A/m, Bs mt 280 Remanence, Br mt 140 Coercivity, Hc A/m 7 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, Value(Typical r X -6 %/ 2~5 Curie temperature, Tc >120 Resistivity, Mm> Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-15 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
12 iac iac QN-15E Initial permeability, iac 1500 Saturation flux density (1194A/m, Bs mt 250 Remanence, Br mt 0 Coercivity, Hc A/m 16 Relative loss factor, tan/ iac (0.1MHz X -6 Relative temp.factor(20~60, Value(Typical r X -6 %/ 0~3 Curie temperature, Tc >0 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-15E QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
13 iac iac QN- Initial permeability, iac Saturation flux density (1194A/m, Bs mt 300 Remanence, Br mt 150 Coercivity, Hc A/m 12 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, Value(Typical r X -6 %/ 4~7 Curie temperature, Tc >140 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN- QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
14 iac iac QN-08 Value(Typical Initial permeability, iac 800 Saturation flux density (1194A/m, Bs mt 3 Remanence, Br mt 160 Coercivity, Hc A/m 15 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, r X -6 %/ 7~ Curie temperature, Tc >160 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-08 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
15 iac iac QN-08B Value(Typical Initial permeability, iac 800 Saturation flux density (1194A/m, Bs mt 360 Remanence, Br mt 2 Coercivity, Hc A/m 18 Relative loss factor, tan/ iac (0.1MHz X -6 Relative temp.factor(20~60, r X -6 %/ ~15 Curie temperature, Tc >160 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-08B QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
16 iac iac QN-06 Value(Typical Initial permeability, iac 650 Saturation flux density (1194A/m, Bs mt 330 Remanence, Br mt 170 Coercivity, Hc A/m 20 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, r X -6 %/~15 Curie temperature, Tc >170 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Impedance ( 0 H(A/m Frequency (khz 0 Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts 1 0 Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-06 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
17 iac iac QN-03B Value(Typical Initial permeability, iac 350 Saturation flux density (1194A/m, Bs mt 330 Remanence, Br mt 1 Coercivity, Hc A/m 40 Relative loss factor, tan/ iac (1.0MHz X Relative temp.factor(20~60, r X -6 %/ 15~25 Curie temperature, Tc >170 Resistivity, Mm>1 Frequency (khz Temperature ( 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac H(A/m Frequency (khz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-03B QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
18 iac iac QN-C4 Value(Typical Initial permeability, iac 40 Saturation flux density (1194A/m, Bs mt 320 Remanence, Br mt 180 Coercivity, Hc A/m 400 Relative loss factor, tan/ iac (MHz X Relative temp.factor(20~60, r X -6 %/ 15~20 Curie temperature, Tc >300 Resistivity, Mm>1 Frequency (MHz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac Impedance ( H(A/m Frequency (MHz Core :: Toroid OD25xID16.7xHT8.3 Coil :: 0.6mm X 0mm, 2Ts Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-C4 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
19 iac iac QN-12L Value(Typical Initial permeability, iac 1200 Saturation flux density (1194A/m, Bs mt 350 Remanence, Br mt 230 Coercivity, Hc A/m 13 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, r X -6 %/ 5~ Curie temperature, Tc >140 Resistivity, Mm>1 Frequency (khz Temperature ( Core loss vs. Temperature 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac 0 Core loss (mw/cm 3 0 H(A/m Frequency (khz 50kHz, 150mT Temperature ( Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QN-12L QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
20 iac iac QM-05 Value(Typical Initial permeability, iac 500 Saturation flux density (1194A/m, Bs mt 250 Remanence, Br mt 140 Coercivity, Hc A/m 40 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, r X -6 %/ 14~20 Curie temperature, Tc >130 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac Impedance ( H(A/m Frequency (khz Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QM-05 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
21 iac iac QM-07 Value(Typical Initial permeability, iac 700 Saturation flux density (1194A/m, Bs mt 280 Remanence, Br mt 150 Coercivity, Hc A/m 30 Relative loss factor, tan/ iac (0.1MHz X Relative temp.factor(20~60, r X -6 %/ 14~18 Curie temperature, Tc >130 Resistivity, Mm>1 Frequency (khz Temperature ( Impedance vs. Frequency 1.Typical values. ( 2.This values were obtained with toroidal cores(od25.0 X ID16.7 X HT 8.3 at 23 unless otherwise shown. (( OD25.0 X ID16.7 X HT (,. Bs(mT tan / iac Impedance ( H(A/m Frequency (khz Core : Toroid OD25xID16.7xHT8.3 Coil : 0.6mm X 0mm, 2Ts Frequency (MHz Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd QM-07 QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD.
22 Notice THE MATTERS TO BE COMPLIED WHEN YOU USE FERRITE POWDER 1. Please observe an under mentioned matter strictly when designing. o When you select a material of ferrite powder, please observe strictly the discription of QEM's catalogs(product manuals regarding permeability, magnetic flux density. and curie temperature, etc.. o Because ferrite core cannot demonstrate an original characteristic in the environment which exceeds the Curie-point. Please use it within the range of the temperature talking into consideration the Curie-point. 2. Please observe an under mentioned matter strictly when the ferrite powder is handled and is used.. o Please do not bring the ferrite powder close to a strong magnet.. o In case of sprayed granule, Please it does not load above 2 stages. o The ferrite core cannot be eaten. For instance, please handle carefully so that a little child should not eat and swallow it by mistake. o Please handle the ferrite core in the state of a usual temperature and usual atmosphere. o Please treat the ferrite core as industrial waste regardless the quantity, when you throw it away. 3. Others The matters described here are a part of the matters to be complied in order to safety use the ferrite powder. If you have any questions about them, please inquire to an under mentioned. Qingdao Ewic Hi-Tech Magnetic Material Co.,Ltd. Binhe North Road, Qingdao-Taiwan Agricultural Economy Development Area, Nancun-zhen, Pingdu-city, Qingdao, Shandong, China Telephone ~7, Facsimile o o 2. o o o o o 3.. Notice QINGDAO EWIC HI-TECH MAGNETIC MATERIAL CO.,LTD. Copyright 2007by Qingdao Ewic Hi-tech Magnetic Material Co,.,Ltd
Ferrite For Switching Power Supplies Material Characteristics
(4/76) 2-1 / 23729 / e14.fm Material Characteristics MATERIAL CHARACTERISTICS(for Transformer and Choke) Material PC4 PC5 Initial permeability 23±25% 24±25% 25±25% 14±25% Amplitude permeability µa 3 min.
Ferrite Cores For Flat Cable and Flexible Substrate Square Type
(1/5) 003-03 / 200405 / e9b22_sh.fm FEATURES Both regular and clamp-on types are available for use with flat cables and flexible substrate. Moreover, the thin type matched to small space is prepared. APPLICATIONS
Test Report. LEDELS LIGHTING CO., LTD Address. Applicant
Test Report No. R011412010R-1 Date Dec. 09, 2014 Page 1 of 10 Applicant LEDELS LIGHTING CO., LTD Address 5F, Block C, Mingjinhai Ind. Park, Zhoushi Road, Shiyan, Bao an, Shenzhen, Guangdong, China The
Ferrite Impeder Rods. hinoday
P R O D U C T G U I D E Ferrite Impeder Rods hinoday About Hinoday Mahindra Hinoday - The pioneers and leaders Mahindra Hinoday pioneers the ferrite manufacturing process in India four decades ago and
Test Report. Report No. SCL03H Page 1 of 7
Report No. SCL03H004659 Page 1 of 7 Applicant FOSHAN BLUEROCKET ELECTRONICS CO.,LTD Address NO.45 GUXIN ROAD, CHANCHENG DISTRICT, FOSHAN, GUANGDONG, P.R.C. The following sample(s) and sample information
Test Report MITSUI HIGH-TEC (SHANGHAI) CO.,LTD NO.2001 XINJIN QIAO ROAD EXPORT PROCESSING ZONE PUDONG SHANGHAI CHINA
Report No. ECL01H033498 Page 1 of 7 Applicant Address MITSUI HIGH-TEC (SHANGHAI) CO.,LTD NO.2001 XINJIN QIAO ROAD EXPORT PROCESSING ZONE PUDONG SHANGHAI CHINA The following sample(s) and sample information
Test Report NANTONG HUADA MICROELECTRONICS GROUP CO., LTD NO.99 ZILANG ROAD,NANTONG CITY,JIANGSU PROVINCE
Report No. ECL01J068075001 Page 1 of 6 Applicant Address NANTONG HUADA MICROELECTRONICS GROUP CO., LTD NO.99 ZILANG ROAD,NANTONG CITY,JIANGSU PROVINCE The following sample(s) and sample information was/were
6 Floor Baowen Building, Baole New Village, Xixiang Yantian, Bao An District, Shenzhen City Tel : Fax:
6 Floor Baowen Building, Baole New Village, Xixiang Yantian, Bao An District, Shenzhen City Tel : +86-755-27912080 Fax: +86-755-27916936 RoHS TEST REPORT Product name: POE power adapter Trademark: Model
Test Report. Report No. ECL01I Page 1 of 7
Report No. ECL01I058317 Page 1 of 7 Applicant MITSUI HIGH-TEC (SHANGHAI) CO.,LTD Address NO.2001 XINJIN QIAO ROAD EXPORT PROCESSING ZONE PUDONG SHANGHAI CHINA The following sample(s) and sample information
Test Report. Report No. RLSHD Page 1 of 6
Report No. RLSHD000756910001 Page 1 of 6 Applicant Address WUJIANG MIGHTYTEK SEMICONDUCTOR CO.,LTD NO.2100 NORTH OF ZHONGSHAN ROAD,SONGLING TOWN,WUJIANG CITY Report on the submitted sample said to be Sample
Test Report. Report No. RLSHE Page 2 of 5 Test Result: Content 1 2
Report No. RLSHE001093670001 Page 1 of 5 Applicant NANTONG HUADA MICROELECTRONICS GROUP CO., LTD Address NO.99 ZILANG ROAD,NANTONG CITY,JIANGSU PROVINCE The following sample(s)and sample information was/were
3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
Configurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
Magnetic Path Length. Outside Dimensions Outer Diameter mm
RoHS Compliant MAJOR USES Output choke coils for Switching Mode Power Supply Choke coils for DC-DC converter Normal mode choke coils for noise control FEATURES Great reduction of core loss enabling low
Ferroxcube. PROPORTIONS OF THE COMPOSITION The base materials are weighed into the correct proportions required for the final composition.
TE NATURE OF SOFT FERRITES Composition Ferrites are dark grey or black ceramic materials. They are very hard, brittle and chemically inert. Most modern magnetically soft ferrites have a cubic (spinel)
Verification Report. No. CANEC Date: 12 Apr Page 1 of 9.
Verification Report. No. CANEC1302893701 Date: 12 Apr 2013. Page 1 of 9. PROMOVER INDUSTRIAL COMPANY LIMITED. N0.34 CHIA SHINE ROAD WAN LUAN VILLAGE PING TUNG COUNTRY 92343 TAIWAN. Sample Name :. SGS Job
SIFERRIT Materials. Siemens Matsushita Components 33
SIFERRIT Materials Based on IEC 60401, the data specified here are typical data for the material in question, which have been determined principally on the basis of ring cores. The purpose of such characteristic
3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
Ferrites - "The Most Important Properties" 1994 Soft Ferrite Users Conference. By : George Orenchak Ferrite International Company
Ferrites - "The Most Important Properties" 1994 Soft Ferrite Users Conference By : George Orenchak Ferrite International Company Inductance - Electrical property that opposes any change in current because
Powdered Metal Cores. MPP (molypermalloy) & High Flux cores. Genalex & Genalex H (nickel-iron) iron) cores. Low Frequency Iron Powder cores
Powdered Metal Cores MPP (molypermalloy) & High Flux cores Genalex & Genalex H (nickel-iron) iron) cores Low Frequency Iron Powder cores RF Iron (carbonyl) Powder cores DuraFlux High Energy cores Page
Test Report No. CANEC Date: 01 Sep 2011 Page 1 of 8
Test Report No. CANEC1103340401 Date: 01 Sep 2011 Page 1 of 8 GEJIU ZILI MINING&SMEL TING CO.,LTD HUOGUDU,JIJIE TOWN,GEJIU CITY,HONGHE ZHOU,YUNNAN PROVINCE CHINA The following sample(s) was/were submitted
Test Report. Report No.RLSZE Page 1 of 11
Report No. Page 1 of 11 Applicant Address HER MEI ELECTRONIC CO.,LTD NO.61,FONG TIEN RD.,FONG TIEN INDUSTRY PARK,DAH-PYI SHANE,YUNLIN COUNTY,TAIWAN,R.O.C The following sample(s) and sample information
Test Report JIANGMEN ABQ ELEECTRONIC MATERIAL CO.,LTD NO.136 GAOXINWESTRD JIANGMEN HI-TECH INDUSTRIAL DEVELOPMENTZONE CITY GUANGDONG
Report No. SCL03I000410001 Page 1 of 7 Applicant Address JIANGMEN ABQ ELEECTRONIC MATERIAL CO.,LTD NO.136 GAOXINWESTRD JIANGMEN HI-TECH INDUSTRIAL DEVELOPMENTZONE CITY GUANGDONG The following sample(s)
Test Report No: (2) Date: 24-Jun-2014 Page 1 of 5
Test Report No: 10339361(2) Date: 24-Jun-2014 Page 1 of 5 JSB Tech Pte Ltd 20 Science Park Road Teletech Park #02-03A Singapore Science Park 2 Singapore 117674 The following sample(s) was/were submitted
Eddy current testing of type-439 stainless steel tubing using magnetic saturation technique
Journal of Mechanical Science and Technology 26 (7) () 1~5 www.springerlink.com/content/173-494x DOI.07/s6-0-0519-z Eddy current testing of type-439 stainless steel tubing using magnetic saturation technique
Verification Report. No. CANEC Date: 10 Jul Page 1 of 13.
Verification Report. No. Date: 10 Jul 2012. Page 1 of 13. 10GTEK TRANSCEIVERS CO.,LTD. 7 FLOOR WEST, ANLE WUYE BUILDING, SHUNFENG ROAD, AREA 44, BAOAN DISTRICT, SHENZHEN, GUANGDONG PROVINCE, CHINA. Sample
Verification Result :.
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 1 17. AMERICAN POWER CONVERSION HOLDING INC.,TAIWAN BRANCH. 3F.,NO. 205, SEC.3, BEIXIN RD., 231 XINDIAN DIST., NEW TAIPEI CITY, 231 TAIWAN.
Overview. Benefits. Applications. Turns and Impedance Characteristics. Core Material and Effective Frequency Range
EMI Core ESD-FPL Series Solid Cores for Flat Cables Overview The KEMET ESD-FPL Series solid cores are designed for use on flat cable. A wide range of sizes and shapes are available. Benefits Solid construction
FrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
Ferrites and accessories
Ferrites and accessories SIFERRIT material K1 Date: September 26 Data Sheet EPCOS AG 26. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
FERRITES. March Ni-Zn. Ferrites for EMI Suppression. BB series(1 Hole)
March 2014 Ni-Zn Ferrites for EMI Suppression BB series(1 Hole) (2/9) REMINDERS FOR USING THESE PRODUCTS Please be sure to read this manual thoroughly before using the products. The products listed on
Ferrites and accessories
Ferrites and accessories SIFERRIT material PC47 Date: June 2013 Data Sheet EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS
FERRITES. March Ni-Zn. Ferrites for EMI Suppression. T series(toroidal)
March 04 Ni-Zn Ferrites for EMI Suppression T series(toroidal) (/8) REMINDERS FOR USING THESE PRODUCTS Please be sure to read this manual thoroughly before using the products. The products listed on this
Test Report TAIYO INK(SUZHOU)CO.,LTD. NO.26 TAISHAN ROAD,SUZHOU NEW DISTRICT, SUZHOU CITY,JIANGSU PROVINCE,P.R.CHINA
Page 1 of 9 Applicant Address TAIYO INK(SUZHOU)CO.,LTD. NO.26 TAISHAN ROAD,SUZHOU NEW DISTRICT, SUZHOU CITY,JIANGSU PROVINCE,P.R.CHINA The following sample(s) and sample information was/were submitted
RoHS/WEEE Measurement of Hazardous Substances in Plastics
HELMUT FISCHER GMBH + + CO. COKG INDUSTRIESTRASSE INDUSTRIESTASSE 21 21 71069 71069 SINDELFINGEN - MAICHINGEN TEL TEL. 07031 07031 // 303-0 FAX 0 FAX 07031 07031 / / 30379 Application Report bn2005_01
SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000
![SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000](/thumbs/96/126844100.jpg "SPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000")
Sunlord Specifications for Multi-layer Chip Ferrite Bead Page 1 of 16 SPECIFICATIONS Customer Product Name Sunlord Part Number Multi-layer Chip Ferrite Bead G Series Customer Part Number [ New eleased,
High Current Ferrite Chip Bead(Lead Free)
High Current Ferrite Chip Bead(Lead Free) HCB15_V-Series Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. Halogen 3. Suitable for reflow soldering. 4.
Test Report NO.: ASZ L-2 Date: Jun 19, 2008 Page 1 of 5
Test Report NO.: ASZ0806043504L-2 Date: Jun 19, 2008 Page 1 of 5 Customer: Foshan ADL lighting Co., Ltd Address: No.1, LIANHE Industrial Zone, Luocun, Nanhai, Foshan, Guangdong, China. Report on the submitted
3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
Ferrites and accessories
EEQ 20, EIQ 20 Core set Series/Type: B66483G, B66483P Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
Problem 3.1 Magnetic Moments + - I
MASSACHUSETTS NSTTUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science 6.007 Electromagnetic Energy: From Motors to Lasers Spring 2011 Problem Set 3: Magnetic Materials and Magnetic
CERN ACCELERATOR SCHOOL Power Converters. Passive components. Prof. Alfred Rufer
CERN ACCELERATOR SCHOOL Power Converters Passive components Prof. Alfred Rufer Overview Part 1: (to be designed) Part 2: Capacitors (to be selected) Part 3: A new component: The Supercapacitor, component
Ferrites and accessories
PM 114/93 Core and accessories Series/Type: B65733, B65734 Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
Iron-Silicon (Fe-Si ) Powder Cores
Iron-Silicon (Fe-Si ) Powder Cores INTRODUCTION Arnold Magnetics, a world leader in magnetic alloy powder products such as MPP, High- Flux and Super-MSS, now offers a new series of powder cores using an
Applications SC
AC Line Filters SC Coils, Standard ype Overview he KEME SC Coils, Standard ype AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
LASER DIODE NX5315EH DISCONTINUED
DESCRIPTION 1 3 nm FOR FTTH PON APPLICATION InGaAsP MQW-FP LASER DIODE The NX5315EH is a 1 3 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. This device
CLD-DS45 Rev 4. Product family data sheet
Product family data sheet CLD-DS45 Rev 4 Cree XLamp XB-D White LEDs PRODUCT DESCRIPTION The XLamp XB-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED
HONOURTEK Delux Array Series HRA0407 Preliminary
Copyright 2018 HONOURTEK,INC.ALL RIGH TS RESERVED HONOURTEK Delux Array Series HRA0407 Preliminary Product Data Sheet HRA0407 Product Introduction The Delux Series LED Array products deliver high quality
1 310 nm FOR 156 Mb/s, 622 Mb/s, 1.25 Gb/s, InGaAsP MQW-FP LASER DIODE
DESCRIPTION 0 nm FOR 56 Mb/s, 6 Mb/s,.5 Gb/s, InGaAsP MQW-FP LASER DIODE The is a 0 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-. These devices are designed
Ferrites and accessories
E 55/28/21 Core Series/Type: B66335 Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
AC Measurement of Magnetic Susceptibility. Physics 401, Fall 2016 Eugene V. Colla
AC Measurement of Magnetic Susceptibility Physics 41, Fall 216 Eugene V. Colla Outline Ferromagnetism Measurement of the magnetic properties of the materials Lab experimental setup and experiments Some
Product Description. Table of contents. Relative Flux vs. Junction Temperature CLD-DS46 Rev 0. Product family data sheet
Product family data sheet CLD-DS46 Rev 0 Cree XLamp ML-C LEDs Product Description The Cree XLamp ML-C LED brings lighting-class reliability and performance to 1/3-watt LEDs. The XLamp ML-C expands Cree
Test Report. Report No. ECL01H Page 1 of 9
Report No. ECL01H067702001 Page 1 of 9 Applicant SHANGHAI SEEFULL ELECTRONIC CO., LTD LITE-ON SEMICONDUCTOR CORP. Address 6 ZHENYE RD. DONGJING INDUSTRIAL AREA SONGJIANG DISTRICT, SHANGHAI, CHINA 9F,NO.233-2
Ferrites and accessories
UU 126/182/20, UI 126/119/20 Core set Series/Type: B67385G, B67385P Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
6-PIN DIP, 400V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET PS7141-1A,PS7141L-1A 6-PIN DIP, 4V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET The PS7141-1A and PS7141L-1A are solid state relays containing GaAs LEDs on the
Test Report. Report No. ECL01H Page 1 of 9
Report No. ECL01H067809001 Page 1 of 9 Applicant Address LITE-ON MICROELECTRONICS (WUXI) CO., LTD. LITE-ON SEMICONDUCTOR CORP. LAND LOT J7 J8WEPZ, NEW DISTRICT, WUXI CITY, JIANGSU, CHINA 9F,NO.233-2 PAO-CHIAO
Cree XLamp ML-E LEDs Data Sheet
Cree XLamp ML-E LEDs Data Sheet The Cree XLamp ML-E LED brings lighting class reliability and performance to 1/2 Watt LEDs. The XLamp ML-E expands Cree s lighting class leadership to linear and distributed
SignalSure 150. Mid power solution AUTOMOTIVE. SignalSure 150 is a compact, surface-mount, mid power LED signaling
AUTOMOTIVE SignalSure 150 Mid power solution SignalSure 150 is a compact, surface-mount, mid power LED signaling solution that delivers an elevated standard of light output, flux density, and color uniformity.
CER Series Controlled ESR Capacitors
CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend
INPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
Cree XLamp MX-3 LEDs Data Sheet
Cree XLamp MX-3 LEDs Data Sheet The Cree XLamp MX-3 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-3 LED continues Cree s
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 3 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7113-1A, -2A and PS7113L-1A, -2A are solid state
Verification Result :.
Verification Report. No. SZXEC1700532001 Date: 13 Jun 2017. Page 1 of 15. SHENZHEN REFLYING ELECTRONIC CO.,LTD. 6 BLDG, GAOXINJIAN INDUSTRIAL ZONE, HEPING VILLAGE,FUYONG TOWN,BAO AN DISTRICT,SHENZHEN,
Test Report No: (1) R1 Date: 29-Apr-13 Page 1 of 5
Test Report No: 10300974(1) R1 Date: 29-Apr-13 Page 1 of 5 JSB Tech Pte Ltd 20 Science Park Road Teletech Park #02-03A Singapore Science Park 2 Singapore 117674 THIS REPORT IS TO SUPERSEDE TEST REPORT
Ferrite Cores for Induction Welding
2005 Product Line atalog Ferrites and ssemblies for High Frequency Induction Welding Subsidiary of TT electronics plc Ferrite ores for Induction Welding F59 Typical Performance urves Ferrite Impeder Materials
Ferrites and accessories
EELP 64, EILP 64 Core set (without clamp recess) Series/Type: B66295G, B66295K Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing
Ferrites and accessories
Toroids (ring cores) R 10.0 6.00 4.00 Series/Type: B64290L0038 Date: December 2017 EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
Some Remarks on Shielding. Herbert Kapitza (FLA) (using slides from a talk by Mike Thuot) DESY,
Some Remarks on Shielding Herbert Kapitza (FLA) (using slides from a talk by Mike Thuot) DESY, 09.10.2006 A shield may be used to confine the radiated field from a noise source. Shields are metallic partitions
WIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
Ferrites and accessories
E 70/33/32 Core and accessories Series/Type: B66371, B66372 Date: June 2013 Data Sheet EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet and the information contained therein
FrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/16/2016 1/12 GmbH www.freltec.com SPECIFICATION Part Number 19C 03 * 151 * A50 D * Q * T04 _ Type Size Impedance Rated Current Material Toler ance Packing
Cree XLamp XT-E High-Voltage White LEDs
Product family data sheet Cree XLamp XT-E High-Voltage White LEDs CLD-DS43 REV 1B Product Description The Cree XLamp XT-E High Voltage White LED provides the lighting class performance and reliability
WIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
Definitions of Terminology in Magnetics
Definitions of Terminology in Magnetics Ag Area of the air gap, or the cross sectional area of the air gap perpendicular to the flux path, is the average cross sectional area of that portion of the air
Ferrites and accessories
Double-aperture cores Series/Type: B62152 Date: June 2013 Data Sheet EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
Ferrites and accessories
E 42/21/20 Core and accessories Series/Type: B66329, B66243 Date: June 2013 Data Sheet EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet and the information contained therein
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 400 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-28 REV 0 Cree XLamp MX-3 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-3 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
CLD-DS45 Rev 5. Product family data sheet
Product family data sheet CLD-DS45 Rev 5 Cree XLamp XB-D LEDs PRODUCT DESCRIPTION The XLamp XB-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
Applications SU 9 V- R
AC Line Filters SU Coils, SU 9V/9H Type Overview The KEMET SU Coils, SU 9V/9H Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode
Ferrites and accessories
EFD 20/10/7 Core and accessories Series/Type: B66417, B66418 Date: June 2013 Data Sheet EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet and the information contained therein
Applications SS 11 V- R CH
AC Line Filters SS Coils, SSV/H-CH Type Overview The KEMET SS Coils, SSV/H-CH Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode
Cree XLamp XP-C LEDs Data Sheet
Cree XLamp XP-C LEDs Data Sheet The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues
Test Report. Report No. RLSHE Page 2 of 7
Report No. Page 1 of 7 Applicant LIGHT COUNTRY (CHANG SHU)CO.,LTD Address NO.88,NING BO ROAD,NEW HI-TECH INDUSTRY,CHANGSHU,JIANGSU,CHINA The following sample(s)and sample information was/were submitted
Cree XLamp ML-E LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS-30 REV 1 PRODUCT FAMILY DATA SHEET
Cree XLamp ML-E LEDs PRODUCT FAMILY DATA SHEET CLD DS-30 REV 1 WWW. CREE.COM/XLAMP PRODUCT DESCRIPTION The Cree XLamp ML-E LED brings lighting-class reliability and performance to 1/2-watt LEDs. The XLamp
Cree XLamp XP-E2 Torch LEDs
Cree XLamp XP-E2 Torch LEDs Product family data sheet CLD-DS101 Rev 2H Product Description The XLamp XP-E2 Torch LED provides lumen output similar to the XLamp XP-G LED but in the smaller optical source
Ring Cores General Information
Ring s General Information Our product line includes a wide range of ring cores with finely graded diameters ranging from 2,5 to 200 mm (see overview of available types). Other core heights can be supplied
Test Report. Report No. ECL01H Page 1 of 7
Report No. ECL01H067640001 Page 1 of 7 Applicant SHANGHAI SEEFULL ELECTRONIC CO., LTD LITE-ON SEMICONDUCTOR CORP. Address 6 ZHENYE RD. DONGJING INDUSTRIAL AREA SONGJIANG DISTRICT, SHANGHAI, CHINA 9F,NO.233-2
Control Standard for Handling Chemical Substances in Products, Parts and Materials
Control Standard for Handling Chemical Substances in Products, Parts and Materials (for Suppliers) The 9 th Edition Hitachi Maxell, Ltd. 1 Contents 1. Purpose...3 2. Scope... 3 3. Terms and definitions..3
SOUTHERN AFRICAN INSTITUTE OF WELDING. Non Destructive Testing (NDT) Course Syllabus & Programme
SOUTHERN AFRICAN INSTITUTE OF WELDING Non Destructive Testing (NDT) Course Syllabus & Programme Certification Body Please refer to our Website (www.saiw.co.za) for any information relating to the Training,
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π MOSV) 2SK3497
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π MOSV) High Power Amplifier Application Unit: mm High breakdown voltage: V DSS = 8 V Complementary to SJ68.. MAX. 5.9 MAX. Ф. ±... 9..5. ±..
Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 0B Product Description The XLamp XP-L LED is the highest performing discrete in Cree s High-Density (HD) class of LEDs, delivering the next generation
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π-mosⅦ) TK12A50D
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π-mosⅦ) TKAD TKAD Switching Regulator Applications Unit: mm Low drain-source ON-resistance: R DS (ON) =. Ω (typ.) High forward transfer admittance:
Certificate of Compliance
Certificate of Compliance DUNS Document Date URL for Additional Information 00-489-5751 Jan 13, 2017 Fairchildsemi.com Contact Title Phone Email Jolene Small Product Ecology Manager 207-761-6214 jolene.small@fairchildsemi.com
Applications SS 11 VL- R
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012
![Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012](/thumbs/86/94868550.jpg "Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012")
Common Mode Filters For automobile signal line ACT series Type: ACT5B ACT5R [8 inch]* (CAN-BUS) [8 inch] (FlexRay) * Dimensions Code [EIA] Issue date: July 0 Conformity to RoHS Directive: This means that,
Thermal vs. Power Loss Efficiency Considerations for Powder Core Materials. Christopher Oliver Nien Teng Micrometals, Incorporated
Thermal vs. Power Loss Efficiency Considerations for Powder Core Materials Christopher Oliver Nien Teng Micrometals, Incorporated Outline Powder Cores Description What properties change with temperature
FrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 3/21/2017 1/12 GmbH www.freltec.com SPECIFICATION Part Number 198 05 * 151 * S * Q * E02 Type Size Nominal Impedance Material Rated Current Tolera nce
Product family data sheet
Product family data sheet CLD-DS51 Rev 8 Cree XLamp XP-G2 LEDs Product Description The XLamp XP-G2 LED builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20%
Applications. Series Core Size (mm) Core Orientation Core Type Rated Current (A) Minimum Inductance (mh) Blank = Standard
AC Line Filters SS Coils, SS7VA/HA Type Overview The KEMET SS Coils, SS7VA/HA Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode