HannStar Product Information

Size: px

Start display at page:

Download "HannStar Product Information"

Warren Sullivan
6 years ago
Views:

1 Document Title HSD100PXN1-A00 HSD100PXTN-A10 Preliminary Specification Page No. 1/28 TO Date Apr., 29, 2010 HannStar Product Information (Preliminary) Model HSD100PXTN -A10 Note (1) The information contained herein is tentative and may be changed without prior notices (2) Please contact HannStar Display Corp. before designing your product based on this module specification. (3) The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein. (4) The mark ** of Model means sub-model code.

2 Document Title HannStar Display Corp. HSD100PXTN-A10 Preliminary Specifica tion Page No. 2/28 Record of Revisions Rev. Date Sub-Model Description of change 1.0 Apr, 29, 2010 A** Product information was first released.

3 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 3/28 Contents 1.0 General description p Absolute maximum ratings. p Optical characteristics.. p Block diagram p Interface pin connection p Electrical characteristics p Reliability test items p Outline dimension p Lot mark... p Package specification p General precaution p.26

4 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 4/ GENERAL DESCRIPTION 1.1 Introduction HannStar Display model HSD100PXTN-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10 (43) inch diagonally measured active display area with XGA (1024 horizontal by 768 vertical pixel) resolution. 1.2 Features 10 (43 diagonal) inch configuration One channel LVDS interface 262K color by 6 bit R.G.B signal input RoHS Compliance Halogen Free CABC SDRRS 1.3 Applications NB Tablet PC Display terminal for AV application 1.4 General information Item Specification Unit Outline Dimension (Typ) x (Typ) x 3.0 (Max.) mm Display area (H) x (V) mm Number of Pixel 1024 RGB (H) x 768(V) pixels Pixel pitch 0.198(H) x 0.198(V) mm Pixel arrangement Display mode RGB Vertical stripe Normally white NTSC 50 % Surface treatment Antiglare, Hard-Coating (3H) Weight (150) (Typ.) g Back-light Power Consumption White LED Logic System (0.75) (Max.) W

5 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 5/ Mechanical Information Module Size Item Min. Typ. Max. Unit Horizontal (H) mm Vertical (V) mm Depth (D) - - (3.0) mm Weight - (150) (165) g 2.0 ABSOLUTE MAXIMUM RATINGS 2.1 Electrical Absolute Rating TFT LCD Module Item Symbol Min. Max. Unit Note Logic Supply voltage V DD V Environment Absolute Rating Item Symbol Min. Max. Unit Note Operating Temperature T opa Storage Temperature T stg

6 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 6/ OPTICAL CHARACTERISTICS 3.1 Optical specification Item Symbol Condition Min. Typ. Max. Unit Note Contrast CR (480) (600) - (1)(2)(4) Response time White luminance (5 point) Color chromaticity (CIE1931) Viewing angle Rising Tr - (3) (6) Falling Tf - (9) (18) Red Green Blue White Hor. Ver. Brightness uniformity Brightness Uniformity msec (1)(3) Y L (180) (220) - cd/m 2 (1)(4)(5) Θ=0 (I L =140mA) R x (0.557) (0.607) (0.657) Normal R Y viewing (0.303) (0.353) (0.403) G x angle (0.261) (0.311) (0.361) G Y (0.491) (0.541) (0.591) B x (0.098) (0.148) (0.198) B Y (0.068) (0.118) (0.168) W x (0.263) (0.313) (0.363) W y (0.279) (0.329) (0.379) Θ L (65) (75) - Θ R (65) (75) - CR>10 Θ U (50) (60) - Θ D B UNI B UNI Θ=0 (5point) Θ=0 (13 points) (60) (70) - (1)(4) (5) (6) 3.2 Measuring Condition Measuring surroundingdark room LED Current I L 140mA Ambient temperature25±2 o C 15min. warm-up time.

7 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 7/ Measuring Equipment FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics. Measuring spot size20 ~ 21 mm Note (1) Definition of Viewing Angle Θ U 12 o clock Φ=90 o Θ L Θ R Φ=180 o Φ=0 o Θ D 6 o clock Φ=270 o Note (2) Definition of Contrast Ratio (CR) measured at the center point of panel CR = Luminance with all pixels white Luminance with all pixels black

8 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 8/28 Note (3) Definition of Response Time Sum of T R and T F white(tft OFF) black (TFT ON) white(tft OFF) 100% 90% TR TF Optical response 10% 0% time Note (4) Definition of optical measurement setup

9 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 9/28 Note (5) Definition of Average Luminance Uniformity of White (5 Point) Average Luminance Uniformity = Y 1 +Y 2 +Y 3 +Y 4 +Y 5 5 Note (6) Definition of brightness uniformity Luminance uniformity(5 points) = (Max Luminance of 5 points) (Min Luminance of 5 points) Luminance uniformity(13points) = (Max Luminance of 13 points) (Min Luminance of 13 points)

10 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 10/ BLOCK DIAGRAM 4.1 TFT LCD Module LE D B /L LED D river Tim ing X -driver IC Connector ED ID D C /D C C onverter C ontroller + LV D S R eceiver Y-driver IC Liq uid C rystal P anel 1024x768 pixels G ray scale M anipulation Voltage G eneration C ircuit 4.2 Pixel Format 1,1 1,2 1,3 1,4 1,1024 2,1 LCD Display Area 1 Pixel 768 Lines R G B R 768,1 R 768, pixel (3072 Dots)

11 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 11/ Relationship Between Displayed Color and Input Basic color Gray scale of Red Gray scale of Green Gray scale of Blue Gray scale of White & Black MSB LSB MSB LSB MSB LSB Gray scale Display R 5 R 4 R 3 R 2 R 1 R 0 G 5 G 4 G 3 G 2 G 1 G 0 B 5 B 4 B 3 B 2 B 1 B 0 level Black L L L L L L L L L L L L L L L L L L - Blue L L L L L L L L L L L L H H H H H H - Green L L L L L L H H H H H H L L L L L L - Light Blue L L L L L L H H H H H H H H H H H H - Red H H H H H H L L L L L L L L L L L L - Purple H H H H H H L L L L L L H H H H H H - Yellow H H H H H H H H H H H H L L L L L L - White H H H H H H H H H H H H H H H H H H - Black L L L L L L L L L L L L L L L L L L L0 L L L L L H L L L L L L L L L L L L L1 L L L L H L L L L L L L L L L L L L L2 Dark Light L3 L60 H H H H L H L L L L L L L L L L L L L61 H H H H H L L L L L L L L L L L L L L62 Red H H H H H H L L L L L L L L L L L L Red L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L L L L L L L H L L L L L L L1 L L L L L L L L L L H L L L L L L L L2 Dark Light L3 L60 L L L L L L H H H H L H L L L L L L L61 L L L L L L H H H H H L L L L L L L L62 Green L L L L L L H H H H H H L L L L L L Green L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L L L L L L L L L L L L L H L1 L L L L L L L L L L L L L L L L H L L2 Dark Light L3 L60 L L L L L L L L L L L L H H H H L H L61 L L L L L L L L L L L L H H H H H L L62 Blue L L L L L L L L L L L L H H H H H H Blue L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L H L L L L L H L L L L L H L1 L L L L H L L L L L H L L L L L H L L2 Dark L3 L60 Light H H H H L H H H H H L H H H H H L H L61 H H H H H L H H H H H L H H H H H L L62 White H H H H H H H H H H H H H H H H H H White L63

12 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 12/ INTERFACE PIN CONNECTION 5.1 TFT LCD Module CN1 (Input signal) 093F30-B0B01A (Starconn or equivalent) Pin No. Signal Description 1 CABC_EN CABC enable 2 VDD 3.3V Power 3 VDD 3.3V Power 4 V_EDID 3.3V Power for EDID 5 ADJ Adjust for LED brightness Note +3.3V 6 CLK_EDID EDID Clock Input 7 DATA_EDID EDID Data Input 8 RXIN0- LVDS Signal - channel0-9 RXIN0+ LVDS Signal+ channel0+ 10 GND Ground 11 RXIN1- Data Input channel1-12 RXIN1+ Data Input channel1+ 13 GND Ground 14 RXIN2- Data Input channel2-15 RXIN2+ Data Input channel2+ 16 GND Ground 17 RXCLKIN- Data Input CLK- 18 RXCLKIN+ Data Input CLK+ 19 GND Ground 20 NC NC 21 NC NC 22 GND Ground 23 GND Ground 24 VLED LED Power +5V 25 VLED LED Power +5V 26 VLED LED Power +5V 27 USB GND NC 28 USB D+ NC 29 USB D- NC 30 USB VDD NC NoteThe brightness of LCD panel could be changed by adjusting PWM

13 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 13/28 [Note] (1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter. Luminance Bright Luminance Luminance Dark Duty(0%) (2) ADJ Signal=0~3.3V,Operation Conditions Duty(100%) Duty Parameter Symbol Conditions Min Typ Max Unit ADJ Logic-High Level V ADJH V ADJ Logic-Low Level V ADJL V Dimming Frequency F ADJ khz Dimming Duty Cycle D % ton TS D= t on / T S x 100% F ADJ = 1 / T S (3) VLED_EN & VDDA_EN & CABC_EN,Operation Conditions Parameter Symbol Min Typ Max Units Remark LED enable pin (control LED driver circuit on/off) LED_EN (H) Volt LED on LED_EN (L) LED off VDD on/off signal VDDA_EN (H) Volt VDD on (control Panel VDD power source on/off) VDDA_EN (L) VDD off CABC on/off signal CABC_EN (H) Volt CABC on (control CABC Function on/off) CABC_EN (L) CABC off

14 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 14/ ELECTRICAL CHARACTERISTICS 6.1 TFT LCD Module Item Symbol Min. Typ. Max. Unit Note Supply Voltage V DD V Note (1) Current of power supply IDD - (0.3) - A V DD =3.3V L0 pattern Ta=25 fv=60hz Inrush current I RUSH A Note (2) Note (1) V DD- dip condition When VDD operating within 2.7V VDD<3.0V,td 10ms, the display may momentarily become abnormal. VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply voltage.. VDD 2.7v 3.0v GND td

15 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 15/28 Note (2) Power on Inrush current test circuit 0.9V DD V DD 0V 0.1V DD 0.5 ms V in rising time

16 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 16/ Switching Characteristics for LVDS Receiver Item Symbol Min. Typ. Max. Unit Conditions Differential Input High Threshold Vth mv Differential Input Low Threshold Vtl mv Input Current I IN ua Differential input Voltage V ID V Common Mode Voltage Offset V CM ( V ID /2) ( V ID /2) V V CM =1.2V 6.3 Bit Mapping & Interface Definition RCLK 7T 6.5/7T 5.5/7T 4.5/7T 3.5/7T 2.5/7T 1.5/7T 0.5/7T Rin0 R[2] R[1] R[0] G[0] R[5] R[4] R[3] R[2] R[1] R[0] G[0] Rin1 G[3] G[2] G[1] B[1] B[0] G[5] G[4] G[3] G[2] G[1] B[1] Rin2 B[4] B[3] B[2] DE (VS) (HS) B[5] B[4] B[3] B[2] DE Pervious cycle Current cycle Next cycle LVDS Receiver Input Timing Definition for 6bits LVDS input

17 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 17/ Interface Timing (DE mode) Item Symbol Min. Typ. Max. Unit Frame Rate -- (55) (60) (65) Hz Frame Period t1 (778) (806) (888) line Vertical Display Time t2 (768) (768) (768) line Vertical Blanking Time t3 (10) (38) (120) line 1 Line Scanning Time t4 (1304) (1344) (1384) clock Horizontal Display Time t5 (1024) (1024) (1024) clock Horizontal Blanking Time t6 (280) (320) (360) clock Clock Rate t7 (55) (65) (75) MHz Timing Diagram of Interface Signal (DE mode) 1024

18 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 18/ Power On / Off Sequence VDD(3.3V) 90% LVDS Interface Signal & Clock VLED(4.5~5.5V) LED dimming, PWM 0V 0V 0V 0V 10% TP1 TP2 10% TP3 90% TP4 TP5 90% TP6 TP10 TP11 90% 10% 10% TP9 TP8 10% TP7 Item Min. Typ. Max. Unit Remark TP msec TP msec TP msec TP msec TP msec TP msec TP msec TP msec TP msec TP msec TP msec

19 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 19/28 Note(1) The supply voltage of the external system for the module input should be the same as the definition of V DD. (2) Apply the lamp volatge within the LCD operation range. When the back-light turns on before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white. (3) In case of VDD = off level, please keep the level of input signal on the low or keep a high impedance. (4) TP11 should be measured after the module has been fully discharged between power off and on period. (5) Interface signal shall not be kept at high impedance when the power is on. (6) The duty of LED dimming signal should be more than 20% in TP4 and TP5 (7) PWM can adjust brightness to control Pin. Pulse duty the bigger the brighter 6.6 Backlight Unit Parameter Symbol Min Typ Max Units Condition LED Current I F -- (20) (20.6) ma Ta=25 LED Voltage V F Volt Ta=25 LED Power P LED Watt Ta=25 consumption Note (1) LED Life-Time N/A 10, Hour Ta=25 I F= 20mA Note (2) Note (1) Calculator value for reference P=I F x V F x N (LED Qty ) Note (2) The LED lifetime defines as the estimated time to 50% degradation of final luminous.

20 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 20/ LED Driver Absolute Maximum Ratings Item Symbol Min. Max. Unit Note LED Power Supply voltage V LED Volt LED_EN, PWM pin Voltage V EN, V PWM Volt DC Electrical Characteristics Parameter Symbol Min Typ Max Units Remark LED Power Supply Voltage PWM High Threshold PWM Low Threshold V LED Volt V PWMH Volt V PWML Volt 6.8 CABC DC Electrical Characteristics Parameter Symbol Min Typ Max Units Remark CABC_EN High Threshold CABC_EN Low Threshold V CABCH 0.7V DD Volt V CABCL V DD Volt

21 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 21/ Reliability test items No. Item Conditions Remark 1 High Temperature Storage Ta=+70 o C, 240hrs 2 Low Temperature Storage Ta=-30 o C, 240hrs 3 High Temperature Operation Ta=+60 o C, 500hrs 4 Low Temperature Operation Ta=-20 o C, 500hrs 5 Thermal Cycling Test (non operation) -30 o C(30min) +70 o C(30min),100 cycles Vibration Sine Wave 6 1.5G, 5~500Hz, XYZ 30min/each direction 7 Shock Half-Sine, 200G, 2ms, ±XYZ, 1time Storage / Operating temperature Humidity (%) Operating Range 40 Storage Range Temperature ( o C) Note.Max wet bulb temp.=39 o C

22 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 22/ OUTLINE DIMENSION 8.1 Front View Outline Dimension Unit mm Note General Tolerance +/- 0.3mm

23 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 23/ Back View Outline Dimension

24 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 24/ LOT MARK 9.1 Lot Mark Code 1,2,3,4,5,6 HannStar internal flow control code. Code 7 production location. Code 8 production year. Code 9 production month. Code 10,11,12,13,14,15 serial number.

25 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 25/ PACKAGE SPECIFICATION 10.1 Packing form LCM Model LCM Qty. in the box Inner Box Size (mm) Notice HSD100PXTN-A 24pcs/box TBD ❶ LCM+EPE+LCM Tray(Face to Face) ❷ CLOSE Tray Cover Snap 5 Lock Points ❸ ❺ Seal the Box With Tape ❹ Insert Top Cover w/ Flat Surface Downward Insert Trays to Partition Slot ( PCB side UP) 15 Trays/Box Packing assembly drawings HSD100PXTN-A Material Notice Box Corrugated Paper Board AB Flute Partition/Pad Corrugated Paper Board B Flute Corner Pad Corrugated Paper Board B Flute Tray PE -- EPE PET --

26 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 26/ GENERAL PRECAUTION 11.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module Breakage of LCD Panel If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin If liquid crystal contacts mouth or eyes, rinse out with water immediately If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water Handle carefully with chips of glass that may cause injury, when the glass is broken Electric Shock Disconnect power supply before handling LCD module Do not pull or fold the LED cable Do not touch the parts inside LCD modules and the fluorescent LED s connector or cables in order to prevent electric shock Absolute Maximum Ratings and Power Protection Circuit Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts parameters, environmental temperature, etc., otherwise LCD module may be damaged Please do not leave LCD module in the environment of high humidity and high temperature for a long time It s recommended to employ protection circuit for power supply Operation Do not touch, push or rub the polarizer with anything harder than HB pencil lead Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

27 Document Title HSD100PXTN-A10 Preliminary Specification Page No. 27/ Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent Mechanism Please mount LCD module by using mounting holes arranged in four corners tightly Static Electricity Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed Disposal When disposing LCD module, obey the local environmental regulations.

28 Document Title HSD100PXTN-A10 HSD100PXTN-A10 Preliminary Preliminary Specifica Specification Page No. 28/28 For specific customer, it has to be defined by sales. 1.4 General information Item Specification Unit Outline Dimension (Typ) x (Typ) x 3.0 (Max.) mm Display area (H) x (V) mm Number of Pixel 1024 RGB (H) x 768(V) pixels Pixel pitch 0.198(H) x 0.198(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Antiglare, Hard-Coating (3H) Weight (155) (Typ.) g Back-light White LED Power Logic System (0.75) (Max.) L0 pattern W Consumption B/L System (1.85) (Max.) Vlcd=3.3V,Vled=12V W Power Logic System (TBD) (Avg.) W Consumption B/L System (TBD) (Avg.) Note Note The patterns that are used to measure the power consumption by CABC turning on include L0, L255, Chessboard, Color bar, Gray 255, Windows desktop, Office and Website(Yahoo!)

HannStar Product Information

Document Title HSD070PWW1-B Formal Product information Page No. 1/28 TO Date Sep, 28, 2011 HannStar Product Information (Formal) Model HSD070PWW1 -B01 Note (1) The information contained herein is tentative