INSTITUTE FOR CONSTRUCTION, BUILDING, MATERILAS AND NON METALS d.o.o. Laboratory for testing building materials OBR

Size: px
Start display at page:

Download "INSTITUTE FOR CONSTRUCTION, BUILDING, MATERILAS AND NON METALS d.o.o. Laboratory for testing building materials OBR"

Transcription

1 INSTITUTE FOR CONSTRUCTION, BUILDING, MATERILAS AND NON METALS d.o.o. Laboratory for testing building materials Tuzla, Kojšino 29, telephon: +387 (0) ; ; FAX: +387 (0) web adress: I. GENERAL INFORMATION PURCHASER OF THE TESTER: Wool-line doo Sarajevo Zmaja od bosne br.7, Sarajevo Bosnia i Herceziovina ORDER NUMBER: Order from year NAME OF THE PRODUCT: Thermal insulation material from wool sheath MANUFACTURES: Wool-line doo Sarajevo BASIC MEASURES: 100x60x4 cm, 100x60x9 cm i 100x60x11 cm DATE OF SAMPLING: SAMPLE SELECTED AND SUBMITTED: Purscher BEGINNING AND END OF TESTING: from to year LABORATORY SAMPLE CODE: OV SAMPLE QUANTITY: TESTED ACCORDING TO STANDARDS: BAS EN 12667:2002;BAS EN 1604:2006; BAS EN 12087:2006; BAS EN 12086:2006; EN ISO , BAS EN ISO DATE OF ISSUE OF THE PROGRAM: year six plates measuring 100x60 cm, from which the semples where cut II. TEST RESULTS At the request of the tester, in the Laboratory of the Institute u Laboratory Institute GIT D.O.O.Tuzla samples of wool were submitted, on which the examination of the dimensions and mass of the samples, the thermal conductivity coefficient, the tensile strength, the dimensional stability, absorption of water, and water vapor diffusion resistance, reaction to fire were performed. 2.1.Physical mechanical properties dimensions of wool samples. Table 1. Presentation of the results of the examination of the dimensions and mass of wool shearth samples Sample LENGHT l u WIDTH w u () HIGHT h u ( ) I II I II I II m 0 ( g) Volume mass (γ) kg/m ,7 24, ,7 23,30 Average l u,sr=1008,8 W u,sr=603,8 h u,sr=40,0 582,2 23, ,0 22, ,3 21,02 Average l u,sr=1010,0 W u,sr=600,8 h u,sr=90,0 1184,2 21, ,9 20, ,3 20,70 Average l u,sr=995,5 W u,sr=606,2 h u,sr=110,0 1366,1 20,65 l u,sr Medium value of sample length (); W u,sr Medium value of the sample width () h u,sr Medium value of sample height (); m 0 Volume mass of the sample (g) γ Medium value of sampe mass (kg/m 3 ) Edition 4 The report must not be reproduced without written permission approvals laboratory. Page 1 of 9 Date:

2 For testing from submitted samples of thermo insulating material in the laboratory was cut six samples dimensions 30x30 cm, different thicknesses, on which is checked coefficient thermal conductivity. The tests were conducted in accordance with BAS EN 12667/2005 on the device LM.305 lambdametar, manufacturers STIROLAB d.o.o. Slovenia. Test results are given in the table 2. Table 2. Presentation of the results of testing the coefficient of thermal conductivity of the wool oven Ordinal number Sample thickness Length and width of the sample Volume sample mass kg/m 3 Coefficient of thermal conductivity λ (W/mK) Resistance pass heat R (m 2 K/W) x300 30,6 0, , x300 32,7 0, ,96 Medium value 31,65 0, , x300 23,6 0, , x300 22,9 0, ,03 Medium value 23,25 0, , x300 22,2 0, , x300 21,9 0, ,51 Medium value 22,05 0, ,46 Table 3. Presentation of the results of testing the tensile strength in the transverse direction Ordinal number Length of the sample Width of the sample Surface of the sample 2 Sample thickness 40 Force F (N) Tensile strength KPa , Medium value ,33 45,83 Sample thickness , , ,88 Medium value ,33 35,92 Sample thickness , , ,90 Medium value 22, ,36 Edition 4 The report must not be reproduced without written permission approvals laboratory Page 2 of 9

3 Table 4. Presentation of results of testing of dimensional stability, absorption of water and resistance of diffusion of water vapor of wool oven O N PROPERTY Thickness 90 Test results Thickness 90 Thickness110 Medium value 1 Dimensional stability after 16 h by length 0,0 % 0,0 % 0,0 % by width 0,0 % 0,0 % 0,0 % by thickness 0,0 % 0,0 % 0,0 % After 48 h by length 0,0 % 0,0 % 0,0 % by width 0,0 % 0,0 % 0,0 % by thickness 0,0 % 0,0 % 0,0 % 2 Long lasting water absorption during iersion min. 227% 222% 202% max. 231% 226% 206% medium 229% 224% 204% 3 Resistance factor diffusive water vapor μ (ng/pa s m 2 ) 1,54 2,43 3,05 Edition 4 The report must not be reproduced without written permission approvals laboratory Page 3 of 9

4 2.1. Testing the reaction to fire Flaability of product exposed to a direct flame effect - Part 2 : Flame testing from one source, flat method EN ISO By accidental method it was taken six samples dimension 250 x 90 in accordance with EN ISO , three sample is expected by width, a three sample by length insulation plates of wool. There was no deviation of the test method, samples are conditioned rooms at a temperature (25±5) o C and relative humidity (50± 20)% in period 28 days. T h e f l a m e w a s a p p l i e d f o r a d u r a t i o n o f 30 seconds. Occasionally testing reaction to the fire, the flame did not reach 150 above the point application of flame, there was no ignition filter paper, as well as the drip flaable parts tes t sample. The sample showed if it is flaable but self - contained by creating protective black layer which is invincible. Table 1: Results and evaluation of the exam Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Sample 6 The duration of the flame: 15 sec 17 sec 16 sec 16 sec 16 sec 18 sec Height of flame 150 YES YES YES YES YES YES Burning filter paper NO NO NO NO NO NO Dripping flaable parts NO NO NO NO NO NO Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Sample 6 Classification: Examined material it falls under D category according to EN ISO Edition 4 The report must not be reproduced without written permission approvals laboratory Page 4 of 9

5 2.2. Graphical display results testing coefficient thermal conductivity samples Picture 1. Graphic display results testing coefficient thermal conductivity on sample 1 Picture 2. Graphic display results testing coefficient thermal conductivity on sample 2 Picture 3. Graphic display results testing coefficient thermal conductivity on sample 3 Edition 4 The report must not be reproduced without written permission approvals laboratory Page 5 of 9

6 Picture 4. Graphic display results testing coefficient thermal conductivity on sample 4 Picture 5. Graphic display results testing coefficient thermal conductivity on sample 5 Picture 6. Graphic display results testing coefficient thermal conductivity on sample 6 Edition 4 The report must not be reproduced without written permission approvals laboratory Page 6 of 9

7 III. PHOTO DOCUMENTATION Edition 4 The report must not be reproduced without written permission approvals laboratory Page 7 of 9

8 Edition 4 The report must not be reproduced without written permission approvals laboratory Page 8 of 9

9 IV. CONCLUSION Based on conducted tests, it has been established that sample thermal insulation material from wool ovations, dimension 300x300, thick 30 has a medium value of thermal conductivity λ= 0,03148 W/mK, and resistance to heat passage R= 0,95 m 2 K/W. For sample thermal insulation material from wool ovations, dimension 300x300, thick 80, medium value thermal conductivity amount λ= 0,03879 W/mK, and resistance to heat passage R=2,06 m 2 K/W. For sample thermal insulation material from wool ovations, dimension 300x300, thick 80, medium value thermal conductivity amount λ= 0,04053 W/mK, and resistance to heat passage R=2,46 m 2 K/W. The examined material falls into category D according to EN ISO An integral part of the report No /17 of year is Conclusion. The results shown relate exclusively on tested samples. Does not assume any responsibility in terms of credibility sampling except if is execeuted in presence media presentation laboratory. The report must not be allowed to multiply, except in a whole, without permission from laboratory for material testing. This report is valid for a period of a year, specifically from until year. E X A M I N E R MANAGER LABORATORY Nedžad Imamović, b.sc.arc a graduated architectural engineer mr.sci. Asmir Softić a graduated construction engineer Mirnesa Hrnjičić, ma - b.sc.tec a graduated technical engineer Marko Tokić b.sc.con a graduated construction engineer - End of report - Edition 4 The report must not be reproduced without written permission approvals laboratory Page 9 of 9

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS Revision index Date of implementation A 15/03/2013 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincarré, 75782 Paris Cedex 16 Tel. 33.(0)1.64.68.84.97 Fax. 33.(0)1.64.68.83.45

More information

Film Capacitors. EMI suppression capacitors. Date: June 2018

Film Capacitors. EMI suppression capacitors. Date: June 2018 Film Capacitors EMI suppression capacitors Date: June 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without

More information

Funkentstör-Kondensatoren der Klasse X2

Funkentstör-Kondensatoren der Klasse X2 STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13006 Second edition 2012-03-01 Ceramic tiles Definitions, classification, characteristics and marking Carreaux et dalles céramiques Définitions, classification, caractéristiques

More information

ASTM C STEADY-STATE HEAT FLUX MEASUREMENTS AND THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE HEAT FLOW METER APPARATUS

ASTM C STEADY-STATE HEAT FLUX MEASUREMENTS AND THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE HEAT FLOW METER APPARATUS Page 1 of 10 ASTM C 518 04 STEADY-STATE HEAT FLUX MEASUREMENTS AND THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE HEAT FLO METER APPARATUS Rockwool Premium Plus Insulation Project No. 3194876SAT-001A

More information

AGING OF THERMAL INSULATION MATERIALS BY ACCELERATED LABORATORY TEST METODS

AGING OF THERMAL INSULATION MATERIALS BY ACCELERATED LABORATORY TEST METODS AGING OF THERMAL INSULATION MATERIALS BY ACCELERATED LABORATORY TEST METODS Jae-Sik Kang 1, 2 Gyoung-Seok CHOI 1 Young-Sun JEONG 1 Seung-Eon Lee 1 1 Korea Institute of Construction Technology, 2311, Daehwa-Dong,

More information

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed

More information

Measurement of sound absorption coefficient for Fraster felt SpaceCover

Measurement of sound absorption coefficient for Fraster felt SpaceCover DELTA Test Report TEST Reg. no. 100 Measurement of sound absorption coefficient for Fraster felt SpaceCover Performed for Fraster ApS Project no.: I100645 Page 1 of 9 27 November 2014 DELTA Venlighedsvej

More information

Test Report No: RJ Date: September 23, The Client submitted and identified the following test material as Polytec Shutter.

Test Report No: RJ Date: September 23, The Client submitted and identified the following test material as Polytec Shutter. CLIENT: TA CHEN INTERNATIONAL, INC. 5855 Obispo Avenue Long Beach, CA 90805 John Elsenheimer Test Report No: RJ0329-2 Date: September 23, 2009 SAMPLE ID: The Client submitted and identified the following

More information

TFI Report Sound Absorption Impact Sound Insulation

TFI Report Sound Absorption Impact Sound Insulation TFI Report 462257-01 Sound Absorption Impact Sound Insulation Customer Desso B.V. Taxandriaweg 15 5142 PA Waalwijk NETHERLANDS Product textile floor covering This report includes 2 pages and 2 annex(es)

More information

High Ohmic/High Voltage Resistors

High Ohmic/High Voltage Resistors High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

DELTA Test Report. DANAK TEST Reg. no Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time

DELTA Test Report. DANAK TEST Reg. no Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 100 Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time Client: Kvadrat Soft Cells A/S Page 1

More information

Measurement of Acoustic Properties of light weight concrete SL-Deck

Measurement of Acoustic Properties of light weight concrete SL-Deck DELTA Test Report TEST Reg. no. 100 Measurement of Acoustic Properties of light weight concrete SL-Deck Performed for Abeo A/S Project no.: I100486 Page 1 of 25 30 June 2014 DELTA Venlighedsvej 4 2970

More information

Interference suppression film capacitors MKP 336 1

Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell

More information

DELTA Test Report. Measurement of sound absorption coefficient for 15 mm Fraster felt Plus acoustic panels with mounting depth 45 mm

DELTA Test Report. Measurement of sound absorption coefficient for 15 mm Fraster felt Plus acoustic panels with mounting depth 45 mm DELTA Test Report TEST Reg. no. 100 Measurement of sound absorption coefficient for 15 mm Fraster felt Plus acoustic panels with mounting depth 45 mm Performed for Fraster ApS DANAK 100/2275 Project no.:

More information

TFI Report Sound Absorption Impact Sound Insulation

TFI Report Sound Absorption Impact Sound Insulation TFI Report 471194-01 Sound Absorption Impact Sound Insulation Customer egetaepper a/s Industrivej Nord 25 7400 Herning DENMARK Product textile floor covering This report includes 2 pages and 2 annex(es)

More information

Principles of Food and Bioprocess Engineering (FS 231) Problems on Heat Transfer

Principles of Food and Bioprocess Engineering (FS 231) Problems on Heat Transfer Principles of Food and Bioprocess Engineering (FS 1) Problems on Heat Transfer 1. What is the thermal conductivity of a material 8 cm thick if the temperature at one end of the product is 0 C and the temperature

More information

Vincent Barraud SOPREMA BASICS OF THERMAL INSULATION

Vincent Barraud SOPREMA BASICS OF THERMAL INSULATION Vincent Barraud SOPREMA BASICS OF THERMAL INSULATION Summary Part 1 - What is thermal conductivity? Part 2 - How the thermal conductivity is measured? Part 3 How to certify a lambda value? Part 1 - What

More information

DELTA Test Report. Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object. Performed for Flex Acoustics

DELTA Test Report. Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object. Performed for Flex Acoustics DELTA Test Report TEST Reg. no. 100 Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object Performed for Flex Acoustics Project no.: T202611 Page 1 of 7 21 January 2013 DELTA Venlighedsvej

More information

ISO 354 INTERNATIONAL STANDARD. Acoustics Measurement of sound absorption in a reverberation room

ISO 354 INTERNATIONAL STANDARD. Acoustics Measurement of sound absorption in a reverberation room INTERNATIONAL STANDARD ISO 354 Second edition 2003-05-15 Acoustics Measurement of sound absorption in a reverberation room Acoustique Mesurage de l'absorption acoustique en salle réverbérante Reference

More information

Background Commonly Used Fabric Tests Thermal Physical Test Methods Objective Limitations Conclusions 9/16/2016

Background Commonly Used Fabric Tests Thermal Physical Test Methods Objective Limitations Conclusions 9/16/2016 Dominique Adams Product Development Engineer Industrial Fabrics September 21, 2016 AATCC Flammability Symposium Background Commonly Used Fabric Tests Thermal Physical Test Methods Objective Limitations

More information

Test Report EN (2008)

Test Report EN (2008) Test Report EN 62233 (2008) Product Name and address of the applicant Name and address of the manufacturer Model Rating Brand name Heating elements for building into floors Advanced Heating Technologies

More information

Examination Heat Transfer

Examination Heat Transfer Examination Heat Transfer code: 4B680 date: 17 january 2006 time: 14.00-17.00 hours NOTE: There are 4 questions in total. The first one consists of independent sub-questions. If necessary, guide numbers

More information

ME 315 Final Examination Solution 8:00-10:00 AM Friday, May 8, 2009 CIRCLE YOUR DIVISION

ME 315 Final Examination Solution 8:00-10:00 AM Friday, May 8, 2009 CIRCLE YOUR DIVISION ME 315 Final Examination Solution 8:00-10:00 AM Friday, May 8, 009 This is a closed-book, closed-notes examination. There is a formula sheet at the back. You must turn off all communications devices before

More information

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed

More information

GRC. Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS

GRC. Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS For exhaust air 91% free area Handles large airflows Cleanable Can be used with commissioning box ALS Standard colour

More information

Laboratory for Acoustics

Laboratory for Acoustics Laboratory for Acoustics Determination of the sound absorption (reverberation room method) of mineral wool, type MW 35, manufacturer Knauf Insulation B.V. Report number A 3022-5E-RA-001 d.d. 22 maart 2016

More information

Tunable White LED compact

Tunable White LED compact Module TW DLE G2 60mm 3000lm 927-965 DLE modules Product description module for Downlights with adjustable colour temperature from 2,700 to 6,500 K at constant luminous flux High colour rendering index

More information

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6712/ARL-SA6713 Revision 0 ARL

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6712/ARL-SA6713 Revision 0 ARL ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT -SA6712/-SA6713 Revision 0 Subject: Sound Absorption Test Date: 17 May 2016 Contents: on Sound Absorption Data, One-third Octave bands

More information

TFI Report Sound Absorption Impact Sound Insulation

TFI Report Sound Absorption Impact Sound Insulation TFI Report 481380-01 Sound Absorption Impact Sound Insulation Customer NEWSPEC CARPET (NINGBO) CO. LTD Cevin Yindong South Road NO. 399 315100 Ningbo CHINA VR Product textile floor covering This report

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

REPORT issued by an Accredited Testing Laboratory

REPORT issued by an Accredited Testing Laboratory issued by an Accredited Testing Laboratory Contact person RISE Tobias Eriksson 2017-03-02 6P07577-25-rev1 1 (3) Energy and circular economy +46 10 516 57 07 tobias.eriksson@ri.se Camfil AB Industrigatan

More information

16 Appendix 16 Electrical Research Association Report

16 Appendix 16 Electrical Research Association Report Guide to the Wiring Regulations 16 Appendix 16 Electrical Research Association Report (ERA) report on armoured cables with external CPCs The attached report was commissioned by the ECA and is copyright

More information

TFI Report Sound Absorption Impact Sound Insulation

TFI Report Sound Absorption Impact Sound Insulation TFI Report 480781-01 Sound Absorption Impact Sound Insulation Customer egetaepper a/s Industrivej Nord 25 7400 Herning DENMARK Product textile floor covering This report includes 2 pages and 2 annex(es)

More information

Correlation between Small-Scale Rate of Heat Release and Full-Scale Room Flashover for Surface linings

Correlation between Small-Scale Rate of Heat Release and Full-Scale Room Flashover for Surface linings Correlation between Small-Scale Rate of Heat Release and Full-Scale Room Flashover for Surface linings B. A.-l. OSTMAN and R. M. NUSSBAUM Swedish Institute for Wood Technology Research Box 5609, S-114

More information

Radial Aluminium Electrolytic Capacitors

Radial Aluminium Electrolytic Capacitors Radial Aluminium Electrolytic Capacitors Low ESR / Z, 105 C Low ESR / Z, Endurance 2.500h to 10.000h at 105 C Rated voltage range: 6,3V to 100V, Nominal capacitance range: 0,47µF to 22.000µF Size range:

More information

INTERNATIONAL OIML R 61-2 RECOMMENDATION

INTERNATIONAL OIML R 61-2 RECOMMENDATION INTERNATIONAL OIML R 61-2 RECOMMENDATION Edition 2004 (E) Automatic gravimetric filling instruments Part 2: Test report format Doseuses pondérales à fonctionnement automatique Partie 2: Format du rapport

More information

Dubai Central Laboratory Engineering Materials Laboratory Section - Structural Unit TEST REPORT T DENSITY OF RIGID CELLULAR PLASTICS

Dubai Central Laboratory Engineering Materials Laboratory Section - Structural Unit TEST REPORT T DENSITY OF RIGID CELLULAR PLASTICS 00Vl /';"yy. ".., MfNT Of DUIAI APPARE T DENSITY OF RIGID CELLULAR PLASTICS REPORT WEB SUPPORT / FACI 2012021728 DATE : 26/03/2012 DCL-220320 12-0038 2012016312 SAMPLE : 2012021743 PS-1516 TESTI SERVICE

More information

ISO 844 INTERNATIONAL STANDARD. Rigid cellular plastics Determination of compression properties

ISO 844 INTERNATIONAL STANDARD. Rigid cellular plastics Determination of compression properties INTERNATIONAL STANDARD ISO 844 Fifth edition 2007-04-15 Rigid cellular plastics Determination of compression properties Plastiques alvéolaires rigides Détermination des caractéristiques de compression

More information

Paper and board Testing of cores Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Paper and board Testing of cores Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11093-8 Second edition 2012-09-01 Paper and board Testing of cores Part 8: Determination of natural frequency and flexural modulus by experimental

More information

TEST REPORT RP

TEST REPORT RP Page 1 of 36 Environmental and material tests (ENV) SECTOR Product description: Tested Models: Manufacturer: Led lights Sample 01 -> Led Puma -> 28234/LED/AS Sample 02 -> Extreme Led -> 556600_04 Sample

More information

Page 2 of 14 Report Ref. No

Page 2 of 14 Report Ref. No age 2 of 14 Summary of testing: Tests performed (name of test and test clause): Clause 6.1, Initial measurements: - MST 01: Visual inspection - 10.2: Maximum power determination - MST 16: Dielectric withstand

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

M I N I S T R Y O F C O M M U N I C A T I O N S T E L E C O M M U N I C A T I O N S S E C T O R T E C H N I C A L S T A N D A R D F O R

M I N I S T R Y O F C O M M U N I C A T I O N S T E L E C O M M U N I C A T I O N S S E C T O R T E C H N I C A L S T A N D A R D F O R M I N I S T R Y O F C O M M U N I C A T I O N S T E L E C O M M U N I C A T I O N S S E C T O R T E C H N I C A L S T A N D A R D F O R M A T E R I A L S N O. G 2 0 : 1 0 : 0 0 1 : 1 8 J U M P E R W I

More information

RELIABILITY TEST DATA SAFETY STANDARD RECOGNIZED CERAMIC CAPACITOR

RELIABILITY TEST DATA SAFETY STANDARD RECOGNIZED CERAMIC CAPACITOR DATA No. : RTD-E76EA RELIABILITY TEST DATA SAFETY STANDARD RECOGNIZED CERAMIC CAPACITOR MURATA PN : DE2E3KH12M*** PAGE 1. INITIAL ( Cap., D.F., I.R. )... 1 2. TEMPERATURE CHARACTERISTIC... 2 3. ROBUSTNESS

More information

A L I O N Technical Center. Test Report. Port Coquitlam, British Columbia, Canada

A L I O N Technical Center. Test Report. Port Coquitlam, British Columbia, Canada FOR: Port Coquitlam, British Columbia, Canada Sound Absorption CONDUCTED: 2018-03-19 Page 1 of 7 ON: Model F202-2448 - Hercules absorption panels TEST METHOD Riverbank Acoustical Laboratories is accredited

More information

Characteristics and Definitions Used for Film Capacitors

Characteristics and Definitions Used for Film Capacitors Characteristics and Definitions Used for Film Capacitors COMMON FILM DIELECTRICS USED IN FILM CAPACITORS PRODUCTS PARAMETER DIELECTRIC (1) UNIT Dielectric constant 1 khz 3.3 3 3. - Dissipation factor 1

More information

ISO 6530 INTERNATIONAL STANDARD

ISO 6530 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 6530 Third edition 2005-02-01 Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liquids Vêtements de protection

More information

MKP-X2 TECHNICAL TERMS EXPLANATION

MKP-X2 TECHNICAL TERMS EXPLANATION TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case of doubt please refer to IEC 60068-1, sub-clause 5.2. Capacitance

More information

Fire Resistant Armoured Power Cable

Fire Resistant Armoured Power Cable Power and Wiring Cables Fire Resistant Armoured Power Cable 00/00V Application Armoured fire resistant cable for use in fixed wiring installations where it is necessary for the cable to retain circuit

More information

DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series

DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature

More information

Technical Report. Project. The Laboratory Determination of The Random Incidence sound Absorption Coefficient of VertiQ Panels.

Technical Report. Project. The Laboratory Determination of The Random Incidence sound Absorption Coefficient of VertiQ Panels. Technical Report Ref Number C/21387/R01a Date 06 April 2011 Project The Laboratory Determination of The Random Incidence sound Absorption Coefficient of VertiQ Panels Prepared for Rockfon Rockwool A/S

More information

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying

CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8426 Second edition 2008-02-01 Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity Transmissions hydrauliques Pompes et moteurs volumétriques

More information

LED light engines LED compact. Module SLE G7 ADV Modules SLE ADVANCED

LED light engines LED compact. Module SLE G7 ADV Modules SLE ADVANCED w LED light engines Module SLE G7 ADV Modules SLE ADVANCED Product description For spotlights and downlights For operating with SELV Driver Luminous flux up to 6,18 lm at tp = 65 C High efficacy up to

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16014-5 First edition 2012-07-01 Plastics Determination of average molecular mass and molecular mass distribution of polymers using sizeexclusion chromatography Part 5: Method

More information

COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING

COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING COURSE: MCE 524 DISCLAIMER The contents of this document are intended for practice and leaning purposes at the

More information

Data Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715*

Data Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715* Drive Technology \ Drive Automation \ System Integration \ Services *22291814_0715* Data Sheet Functional Safety Characteristic Safety Values for BE.. Brakes Edition 07/2015 22291814/EN SEW-EURODRIVE Driving

More information

Dimension OD±1. General Technical Data. Technical Characteristics GB IEC252:1992 Operating temperature -25 ~+70. Capacitance Tolerance

Dimension OD±1. General Technical Data. Technical Characteristics GB IEC252:1992 Operating temperature -25 ~+70. Capacitance Tolerance Dimension P±1 P±1 OD±1 H±2 11±1 OD±1 H±2 11±1 FEATURES Very low dissipation factor High insulation resistance High thermal stability ORDERING CODE CMR65 A 1 156 J 250 B (1) (2) (3) (4) (5) (6) (7) (1)

More information

TEST REPORT No. : XMML Date : Jan.06, 2012 Page: 1 of 12

TEST REPORT No. : XMML Date : Jan.06, 2012 Page: 1 of 12 Page: 1 of 12 KINGKONREE INTERNATIONAL CHINA SURFACE INDUSTRIAL CO., LTD 1213-1255/12F, DONGMING BLD., MINZHI DADAO, BAOAN DISTRICT, SHENZHEN P.R. CHINA The following sample(s) was/ were submitted and

More information

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6266/ARL-SA6274 Revision 0 ARL

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6266/ARL-SA6274 Revision 0 ARL ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT -SA6266/-SA6274 Revision 0 Subject: Sound Absorption Test Date: 17 February 2015 Contents: on Sound Absorption Data, One-third Octave

More information

LED light engine / OLED LED compact. Module DLE G4 ADV Modules DLE

LED light engine / OLED LED compact. Module DLE G4 ADV Modules DLE w LED light engine / OLED Module DLE G4 ADV Modules DLE Product description For downlights Luminous flux up to 3,71 lm at tp = 65 C High efficacy up to 185 lm/w for the LED module at tp = 25 C High system

More information

CDD/CDR. Circular ceiling diffuser for supply air QUICK FACTS

CDD/CDR. Circular ceiling diffuser for supply air QUICK FACTS Circular ceiling diffuser for supply air QUICK FACTS Spread pattern can be shielded Used with commissioning box ALS Cleanable Adjustable slot Perforated diffuser face = CDD Non-perforated diffuser face

More information

Fusible, Non-Flammable Metal Film Leaded Resistors

Fusible, Non-Flammable Metal Film Leaded Resistors Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned

More information

Calcul des coefficients d'absorption alpha sabine

Calcul des coefficients d'absorption alpha sabine Calcul des coefficients d'absorption alpha sabine Selon Norme NFEN 20354 TEST n : 138G04-7 TYPE : Vinyl 340/360 g/m² DATE : 04 février 2005 SUPPORT : Echantillon collé sur plaque de BA13 DONNEES : Température

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13196 First edition 2013-03-01 Soil quality Screening soils for selected elements by energydispersive X-ray fluorescence spectrometry using a handheld or portable instrument

More information

Metallized polyester film capacitors MKT 470

Metallized polyester film capacitors MKT 470 MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated

More information

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/ Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not

More information

Test Report No. AJHG FB Date: JAN.15, 2015 Page 1 of 10

Test Report No. AJHG FB Date: JAN.15, 2015 Page 1 of 10 Test Report No. AJHG1501000016FB Date: JAN.15, 2015 Page 1 of 10 HANGZHOU HIKVISION DIGITAL TECHNOLOGY CO., LTD NO.7000 DONGLIU ROAD,BINJIANG DISTRICT, HANGZHOU 310052, ZHEJIANG, CHINA The following sample(s)

More information

HL 3000 / HL 6000 Elastic bearings for high loads made from polyurethane

HL 3000 / HL 6000 Elastic bearings for high loads made from polyurethane HL / HL 6 Elastic bearings for high loads made from polyurethane 2 PURASYS vibradyn HL and 6 - solutions for high loads The problem Vibrations that occur in buildings are a problem for a variety of reasons.

More information

Laboratory for Acoustics

Laboratory for Acoustics Laboratory for Acoustics Determination of the sound absorption (reverberation room method) of a wooden linear ceiling/wall system, manufacturer Derako International Report number AB 1079-1E-RA d.d. November

More information

Control Standard for Handling Chemical Substances in Products, Parts and Materials

Control Standard for Handling Chemical Substances in Products, Parts and Materials Control Standard for Handling Chemical Substances in Products, Parts and Materials (for Suppliers) The 9 th Edition Hitachi Maxell, Ltd. 1 Contents 1. Purpose...3 2. Scope... 3 3. Terms and definitions..3

More information

TEST REPORT No. : XMML Date : Apr. 26, 2010 Page : 1 of 15

TEST REPORT No. : XMML Date : Apr. 26, 2010 Page : 1 of 15 Page : 1 of 15 COSMOS GRANITE & MARBLE 501 S. NEW HOPE ROAD, RALEIGH, NC 27610 USA The following sample(s) was/were submitted and identified on behalf of the client as: Sample Name : SL2001 SGS Ref. No.

More information

How formulations can influence the PVC cables fire behavior

How formulations can influence the PVC cables fire behavior The project class B2ca How formulations can influence the PVC cables fire behavior PVC FORUM ITALIA: CABLES GROUP How formulations can influence the PVC cables fire behavior Cables Group Italy The project

More information

TRANSPARENT INNOVATIVE MATERIALS: ENERGETIC AND LIGHTING PERFORMANCES EVALUATION

TRANSPARENT INNOVATIVE MATERIALS: ENERGETIC AND LIGHTING PERFORMANCES EVALUATION TRANSPARENT INNOVATIVE MATERIALS: ENERGETIC AND LIGHTING PERFORMANCES EVALUATION C. Buratti, E. Moretti Department of Industrial Engineering, Perugia University Via G. Duranti, 67-06125 Perugia, Italy.

More information

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6986/ARL-SA6987 Revision 0 ARL

ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT ARL-SA6986/ARL-SA6987 Revision 0 ARL ETS-LINDGREN ACOUSTIC RESEARCH LABORATORY OFFICIAL LABORATORY REPORT -SA6986/-SA6987 Revision 0 Subject: Sound Absorption Test Date: 01 February 2017 Contents: on Sound Absorption Data, One-third Octave

More information

Product Selector Guide

Product Selector Guide Product Selector Guide Encapsulation and casting systems ARALDITE, ARADUR, ARATHERM, ARATHANE www.electrical-insulation-materials.com Encapsulation and casting systems ARALDITE, ARADUR, ARATHERM, ARATHANE

More information

High Ohmic/High Voltage Resistors

High Ohmic/High Voltage Resistors High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series

More information

INVICTA S SERIES SINGLE LEAF HINGED

INVICTA S SERIES SINGLE LEAF HINGED INVICTA S SERIES 1 st Edition Porseg - Sistemas de Segurança S.A. 2014 INVICTA S SERIES SINGLE LEAF HINGED P O R S E G, S I S T E M A S D E S E G U R A N Ç A, S. A. B U L L E T P R O T E C T I O N P R

More information

METHOD OF IN-SITU MEASUREMENT OF THERMAL INSULATION PERFORMANCE OF BUILDING ELEMENTS USING INFRARED CAMERA

METHOD OF IN-SITU MEASUREMENT OF THERMAL INSULATION PERFORMANCE OF BUILDING ELEMENTS USING INFRARED CAMERA METHOD OF IN-SITU MEASUREMENT OF THERMAL INSULATION PERFORMANCE OF BUILDING ELEMENTS USING INFRARED CAMERA Shinsuke Kato 1, Katsuichi Kuroki 2, and Shinji Hagihara 2 1 Institute of Industrial Science,

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD L - -----we- - -- ------ _. --- _ - -- -- --. _ -- --.. INTERNATIONAL STANDARD Is0 8302 First edition 1991-08-01 Thermal insulation - Determination of steady-state thermal resistance and related properties

More information

ISO INTERNATIONAL STANDARD. Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method

ISO INTERNATIONAL STANDARD. Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method INTERNATIONAL STANDARD ISO 22007-3 First edition 2008-12-15 Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method Plastiques Détermination de la

More information

ISO INTERNATIONAL STANDARD. Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method

ISO INTERNATIONAL STANDARD. Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11890-1 Second edition 2007-07-01 Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method Peintures

More information

Aluminum Capacitors Solid Axial

Aluminum Capacitors Solid Axial SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range

More information

L 305/8 Official Journal of the European Union (Acts whose publication is not obligatory) COMMISSION

L 305/8 Official Journal of the European Union (Acts whose publication is not obligatory) COMMISSION L 305/8 Official Journal of the European Union 4.11.2006 II (Acts whose publication is not obligatory) COMMISSION COMMISSION DECISION of 27 October 2006 amending Decision 2000/147/EC implementing Council

More information

DECLARATION OF PERFORMANCE No. 37/X-PIR/OBO

DECLARATION OF PERFORMANCE No. 37/X-PIR/OBO DoP 37/X-/OBO (EN) Page 1/6 DECLARATION OF PERFORMANCE No. 37/X-/OBO 1. Unique identification code of product-type: Sandwich panel SP2B X-, SP2B X- ENERGY, SP2E X-, SP2E X- ENERGY with polyisocyanurate

More information

Final Exam: 11 May 2001, Friday

Final Exam: 11 May 2001, Friday Spring 2001 BE 3600 BioInstrumentation Final Exam: 11 May 2001, Friday POSTED ON THE WEB AS A STUDY AID This exam: Consists of 12 questions, Score from this exam will determine 25-30 % of your grade, You

More information

PART 2 THERMAL RESPONSE. DIF SEK Part 2: Thermal Response 0/ 44

PART 2 THERMAL RESPONSE. DIF SEK Part 2: Thermal Response 0/ 44 DIF SEK PART 2 THERMAL RESPONSE DIF SEK Part 2: Thermal Response 0/ 44 Resistance to fire - Chain of events Θ Loads 1: Ignition Steel columns time 2: Thermal action 3: Mechanical actions R 4: Thermal response

More information

Laboratory for Acoustics. Determination of the sound absorption (reverberation room method) of Airpanel, manufacturer Texdecor

Laboratory for Acoustics. Determination of the sound absorption (reverberation room method) of Airpanel, manufacturer Texdecor Laboratory for Acoustics Determination of the sound absorption (reverberation room method) of Airpanel, manufacturer Texdecor Report number A 3151-2E-RA-001 d.d. June 1, 2017 Laboratory for Acoustics Determination

More information

5th Pan American Conference for NDT 2-6 October 2011, Cancun, Mexico. Determination of thermal technical properties of ceramics masonry components

5th Pan American Conference for NDT 2-6 October 2011, Cancun, Mexico. Determination of thermal technical properties of ceramics masonry components Determination of thermal technical properties of ceramics masonry components Jiri ZACH 1, Jiri BROZOVSKY 1, Jitka HROUDOVA 1 1 Institute of Building Materials and Components, Faculty of Civil Engineering,

More information

Department of Mechanical Engineering, University Visvesvaraya College of Engineering, Bangalore University, Bangalore, Karnataka, India

Department of Mechanical Engineering, University Visvesvaraya College of Engineering, Bangalore University, Bangalore, Karnataka, India EXPERIMENTAL INVESTIGATION ON EFFECTS OF HEAT FLUX AND DENSITY ON SMOLDERING OF COTTON Ramesh D K *1, Manjunath S O #1, Sanjay R #2, Sai Naveen S #3, Jayantha #4 * Associate professor, # BE Scholar Department

More information

Mathematical Modelling of Ceramic Block Heat Transfer Properties

Mathematical Modelling of Ceramic Block Heat Transfer Properties Proceedings of the 3 RD INTERNATIONAL CONFERENCE ADVANCED CONSTRUCTION 18-19 October, 2012, Kaunas, Lithuania Kaunas University of Technology, Faculty of Civil Engineering and Architecture Studentu st.

More information

Test Report. RI Acoustic Lab. Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier. 20 Feb. 07

Test Report. RI Acoustic Lab. Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier. 20 Feb. 07 Test Report RI Acoustic Lab Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier 20 Feb. 07 Title Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 to

More information

RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA, SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA, 2017 Volume 25, Number 40

RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA, SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA, 2017 Volume 25, Number 40 RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2017 Volume 25, Number 40 THE EFFECT OF THE HEAT FLUX ON THE SELF-IGNITION OF ORIENTED

More information

IGNITABILITY ANALYSIS USING THE CONE CALORIMETER AND LIFT APPARATUS

IGNITABILITY ANALYSIS USING THE CONE CALORIMETER AND LIFT APPARATUS 189 IGNITABILITY ANALYSIS USING THE CONE CALORIMETER AND LIFT APPARATUS Mark A. Dietenberger USDA Forest Service Forest Products Laboratory* Madison, WI 53705-2398 ABSTRACT The irradiance plotted as function

More information

HAZARD COMMUNICATION and GHS. Environmental Health and Safety

HAZARD COMMUNICATION and GHS. Environmental Health and Safety HAZARD COMMUNICATION and GHS Environmental Health and Safety RIGHT-TO-KNOW LAW OSHA created the Hazard Communication Standard in 1983. Applies to all places of employment where employees are exposed to

More information

Power Resistors, for Mounting onto a Heatsink Thick Film Technology

Power Resistors, for Mounting onto a Heatsink Thick Film Technology RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992

More information