Chemical resistance of Socorex dispensers
|
|
|
- Norma McKinney
- 6 years ago
- Views:
Transcription
1 Technical support information Chemical resistance of Socorex dispensers Calibrex TM models 525 / 530 Bottle-top dispensers are used daily for dispensing a wide range of chemicals. Therefore, instruments have to meet various requirements assuring safety of the laboratory staff and their work. Dispensers shall not release any substances which may interfere with trace analysis, have cytotoxic properties, distort optical tests or influence chromatographic methods and residue analysis. Materials Special attention is given to component materials (see charts below). All parts of the Calibrex dispensers in contact with the liquid are made of robust and chemically inert materials providing for long instrument life. Chemicals from A to Z The following list includes most frequently used chemicals. It provides useful information for the safe and adequate use of Calibrex 525/530 dispensers. However, safety precautions and recommendations in operating instructions must be followed carefully. Code explanations A = Good resistance B = Acceptable with limitations C = Not recommended Parts Calibrex 525 Calibrex 530 Feed tube FEP Valve body Ceramic - Aluminum oxide Valve balls Ceramic - Aluminum oxide Valve springs Platinum Iradium Plate PTFE Barrel Borosilicate glass Plunger Ground Borosilicate glass PFA coated glass Body ETFE Delivery jet FEP / PCTFE Cap ETFE 1 = Possible crystallisation - blockage or possible coating peeling (do not let dry plunger/barrel together). 2 = Swell of plunger protection layer, possible peeling. 3 = Acid vapours (better resistance with lower concentration). Do not leave instrument on bottle. 4 = Risk of damage, softening or discoloration of external parts through vapours. Do not leave instrument on bottle. 5 = Chemical degradation of glass parts (plunger/barrel). Page 1
2 Technical support information A Acetaldehyde (Ethanal) A A Acetic acid 96% A B/2 Acetic acid 100% (glacial) B/4 B/2/4 Acetic anhydride B/4 B/4 Acetone (Propanone) B/4 B/4 Acetonitrile (MECN) B/4 B/4 Acetophenone B/4 B/2/4 Acetyl Chloride B/4 B/2/4 Acetylacetone A A Acrylic acid A A Acrylonitrile B/4 B/4 Adipic acid C/1 A Allyl alcohol A A Aluminum chloride C/1 A Amino acids C/1 A Ammonia 20% B/4 B/4 Ammonia 20-30% B/4 B/4 Ammonium chloride C/1 A Ammonium fluoride C/1 A Ammonium molybdate C/1 A Ammonium sulfate C/1 A Amyl alcohol (Pentanol) A A Amyl chloride (Chloropentane) B/4 B/2/4 Aniline A A Ascorbic acid C/1 A n-amyl acetate B/4 B/4 B Barium chloride C/1 A Benzaldehyde A A Benzene B/4 B/4 Benzine A A Benzoyl chloride B/4 B/4 Benzyl alcohol A A Benzyl chloride B/4 B/4 Bis(2-ethylhexyl) phthalate B/4 B/4 Boric acid 10% B/1 A Bromine C/4 C/2/4 Bromobenzene B/4 B/4 Bromonaphtalene A A Butanediol B/1 A Butanol A A Butanone (MEK) B/4 B/4 Butyl acetate B/4 B/4 Butyl methyl ether B/4 B/4 Butylamine B/4 B/4 Butyric acid B/4 B/4 Page 2
3 information Technical support C Calcium carbonate C/1 B/1 Calcium chloride C/1 A Calcium hydroxide C/1 B/1 Calcium hypochlorite C/1 B/1 Carbon disulfide B/4 B/4 Carbon tetrachloride B/4 B/4 Chlorine dioxide B/4 B/2/4 Chloro naphthalene B/4 B/4 Chloroacetaldehyde 45% B/1 A Chloroacetic acid B/1 A Chloroacetone B/4 B/4 Chlorobenzene B/4 B/4 Chlorobutane B/4 B/4 Chloroethanol B/4 B/4 Chloroform B/4 B/4 Nitro-hydrochloric acid (Aqua regia) B/4 B/2/4 Chlorosulfuric acid B/4 B/4 Chlorosulfuric acid 100% B/3/4 B/3/4 Chromic acid 100% B/3/4 B/3/4 Chromosulfuric acid 100% C/1/3/4 B/2/3/4 Citric acid B/1 A Copper fluoride C/1 B/1 Copper sulfate C/1 A Cresol B/1 A Cumene (Isopropylbenzene) B/4 B/4 Cyanoacrylate C/1 C/1 Cyclohexane B/4 B/4 Cyclohexanone B/4 B/4 Cyclopentane B/4 B/4 D 1,2-Diethylbenzene B/4 B/4 1,4-Dioxane (Diethylene dioxide) B/4 B/4 1-Decanol A A Decane A A Di-(2-ethylhexyl) peroxydicarbonate B/4 B/4 Dibenzyl ether B/4 B/4 Dichloroacetic acid A A Dichlorobenzene A A Dichloroethane A A Dichloroethylene B/4 B/4 Diesel oil (Heating oil) A A Diethanolamine A A Diethylamine B/4 B/4 Diethylene glycol A A Diethylether B/4 B/4 Dimethyl sulfoxide (DMSO) B/1/4 B/4 Dimethylaniline A A Dimethylformamide (DMF) B/4 B/4 Diphenyl ether B/1/4 B/4 Page 3
4 information Technical support E Ethanol A A Ethanolamine B/4 B/4 Ether B/4 B/4 Ethyl acetate B/4 B/4 Ethylbenzene B/4 B/4 Ethylene chloride B/4 B/4 Ethylene diamine A A Ethylene glycol A A F Fluoroacetic acid B/1/4 B/4 Formaldehyde (Formalin) A A Formamide A A Formic acid A A G Gamma-butyrolactone A A Gasoline B/4 B/4 Glycerin <40% A A Glycolic acid 50% B/1 A H Heating oil (Diesel oil) A A Heptane A A Hexane A A Hexanoic acid B/1 A Hexanol A A Hydriodic acid B/4 B/4 Hydrobromic acid A A Hydrochloric acid 20% (HCI) A A Hydrochloric acid 37% (HCI) B/3 B/3 Hydrofluoric acid (HF) C/5 C/5 Hydrogen peroxide A B/2 I Iodine C/1 B/1 Iodine bromide C/4 C/2/4 Iodine chloride C/4 C/2/4 Isoamyl alcohol A A Isobutanol A A Isooctane A A Isopropanol A A Isopropyl ether B/4 B/4 Iso-propylamine B/4 B/4 L Lactic acid C/1 A M 2-Methoxyethanol A A Methanol A A Methoxybenzene (Anisol) B/4 B/4 Methyl benzoate B/1/4 B/4 Methyl chloride (Chloromethane) B/4 B/4 Methyl formate A A Methyl iodide (Iodomethane) B/4 B/4 Page 4
5 information Technical support M Methyl methacrylate (MMA) B/4 B/4 Methyl propyl ketone (2-Pentanone) A A Methyl tert-butyl ether B/4 B/4 Methylene chloride (Dichloromethane) (DCM) B/4 B/2/4 Methylpentanone A A Mineral oil (engine oil) A A Monochloroacetic acid B/1 A N N-Butylamine B/4 B/4 Nitric acid 100% C/3/4 C/2/3/4 Nitric acid 30-70% B/4 B/2/4 Nitric acid dil. <30% B/4 B/4 Nitrobenzene B/4 B/4 Nitromethane B/4 B/4 N-methyl-2-pyrrolidone (NMP) A A O Octane A A Octanol A A Oil (vegetable, animal) B/4 B/4 Oil of turpentine B/4 B/4 Oleic acid B/1 A Oxalic acid C/1 A P Pentane B/4 B/4 Peracetic acid A A Perchloric acid 100% B/4 B/4 Perchloric acid diluted A A Perchloroethylene B/4 B/4 Petroleum B/4 B/4 Petroleum ether / spirit B/4 B/4 Phenol A A Phenylethanol B/4 B/4 Phenylhydrazine B/1/4 B/4 Phosphoric acid 100% A A Phosphoric acid 85% A A Piperidine B/4 B/4 Potassium chloride C/1 A Potassium dichromate C/1 B/1 Potassium hydroxide C/1 A Potassium iodide C/1 A Potassium permanganate C/1 B/1 Potassium peroxydisulfate (persulfate) C/1 B/1 Potassium sulfate C/1 B/1 Propionic acid (Propanoic acid) A A Propylene glycol (Propane-1,2-diol) A A Propylene oxide A A Pyric acid (Trinitrophenol) B/4 B/4 Pyridine B/4 B/4 Page 5
6 Technical support information P Pyruvic acid B/1 A R Resorcin C/1 A S Salicylaldehyde A A Scintilation fluid A A Silver acetate C/1 C/1 Silver nitrate C/1 A Sodium acetate C/1 A Sodium chloride (kitchen salt) C/1 A Sodium dichromate C/1 A Sodium fluoride C/1 B/1 Sodium hydroxide 30% C/1 A Sodium hypochlorite C/1 B/4 Sodium thiosulfate C/1 A Sulfonitric acid 100% B/3/4 B/2/3/4 Sulfur dioxide B/4 B/4 Sulfuric acid 98% B/4 B/2/4 T 1,1,2-Trichlortrifluoroethane B/4 B/4 Tartaric acid C/1 A Tetrachlorethylene B/4 B/4 Tetrahydrofuran (THF) B/4 B/2/4 Tetramethylammonium hydroxide C/1/4 B/4 Toluene B/4 B/4 Trichlorethylene B/4 B/4 Trichloroacetic acid B/1/4 B/4 Trichlorobenzene B/4 B/4 Trichloroethane B/4 B/4 Trichloromethane (Chloroform) B/4 B/4 Triethanolamine A A Triethylene glycol A A Trifluoroacetic anhydride (TFAA) B/4 B/4 Trifluoromethane (Fluoroform) B/4 B/4 U Urea C/1 A X Xylene B/4 B/2/4 Z Zinc chloride 10% C/1 A Zinc sulfate 10% C/1 A The above guidelines have been carefully reviewed prior to publication. Should you require information on chemicals not listed or contribute to some comments, please feel free to contact us. Page 6
Chemical resistance of Socorex microdispensers
Technical support information Chemical resistance of Socorex microdispensers cura TM manual 865 Microdispensers are intended for rapid dispensing of various chemicals. They meet requirements assuring safety
Dispensette S NEW! Bottle-top Dispenser. The New Generation! n New discharge tube. n New valve system. n Faster priming. n Less force needed during
The New Generation! Dispensette S Bottle-top Dispenser F I R S T C L A S S B R A N D Innovative ideas with trusted technology the new bottle-top dispenser. n New discharge tube with or without recirculation
Dispensette S NEW! Bottle-top Dispenser. The New Generation! n New discharge tube. n New valve system. n Faster priming. n Less force needed during
The New Generation! Dispensette S Bottle-top Dispenser F I R S T C L A S S B R A N D Innovative ideas with trusted technology the new bottle-top dispenser. n New discharge tube with or without recirculation
Dispensette. Dispensette the right bottle-top dispenser for your application.
Dispensette the right bottle-top dispenser for your application. Dispensette F I R S T C L A S S B R A N D The original Dispensette with its broad range of application has proven reliable for accurate
Dispensette. Dispensette the right bottle-top dispenser for your application.
Dispensette the right bottle-top dispenser for your application. Dispensette F I R S T C L A S S B R A N D The original Dispensette with its broad range of application has proven reliable for accurate
Dispensette. The Standard in Bottletop Dispensing For Over 40 Years. D i s p e n s e r s
Dispensette Dispensette III, Dispensette Organic, and Dispensette HF bottletop dispensers improve accuracy, safety, and reagent conservation in a broad range of applications. They mount directly on most
Dispensette. The Standard in Bottletop Dispensing For Over 40 Years. Dispensers
Dispensette Dispensette III, and Dispensette Organic, bottletop dispensers improve accuracy, safety, and reagent conservation in a broad range of applications. They mount directly on most solvent and reagent
Dispensette. The Standard in Bottletop Dispensing For Over 30 Years. D i s p e n s e r s
Dispensette Dispensette III, Dispensette Organic, and Dispensette HF bottletop dispensers improve accuracy, safety, and reagent conservation in a broad range of applications. They mount directly on most
For any application the right Dispensette. Dispensette III Dispensette Organic Dispensette HF
Dispensette Bottle-top Dispenser Dispensette III Dispensette Organic Dispensette HF The Dispensette bottle-top dispenser has proven itself the world over with its wide range of practical applications.
Dispensette. Dispensette III Dispensette Organic Dispensette TA. Bottle-top Dispenser NEW!
Dispensette III Dispensette TA NEW! The Dispensette bottle-top dispenser has proven itself the world over with its wide range of practical applications. It has been continuously improved over decades to
Appendix 5: table of chemical compatibility for tubing
Appendix 5: table of chemical compatibility for tubing KEY 1 Excellent 2 Good 3 Fair 4 Not recommended - no data Silicone PharMed Iso-Versinic PVC Acetaldehyde 3 4 4 2 Acetamide, 67% in w 1 2 4 4 Acetate
Dispensette. The Standard in Bottletop Dispensing For Over 40 Years. D i s p e n s e r s
Dispensette Dispensette III, Dispensette Organic, and Dispensette HF bottletop dispensers improve accuracy, safety, and reagent conservation in a broad range of applications. They mount directly on most
500 SERIES CHEMICAL RESISTANCE GUIDE
500 SERIES CHEMICAL RESISTANCE GUIDE INTRODUCTION The Stonchem 500 Series Chemical Resistance Guide is designed to aid in the proper selection of material for every job application. Exposure to over 250
Dispensette. The Standard in Bottletop Dispensing For Over 40 Years. Dispensers
Dispensette Dispensette III, and Dispensette Organic, bottletop dispensers improve accuracy, safety, and reagent conservation in a broad range of applications. They mount directly on most solvent and reagent
Glove Selection Chart
Glove Selection Chart The following guide is a general guide for glove selection in relation to chemicals handled. The information presented here is believed to be accurate; however, we cannot guarantee
PRODUCT DATA SHEET PDS A88_E
Plugs Suitable for A B C D Ref. Quantity Box/Bag (mm) (mm) (mm) (mm) TCP5 M12R + Pg7R M12R 4,5 8,5 10,8 4,5 3.000/100 TCP10 Pg9R Pg9R 6 12 12 4,5 2.000/100 TCP12 M12 + Pg7 M12 + Pg7 M16R + Pg11R M16R +
Chemical Resistance Properties of Anko Tubing
Chemical Resistance Properties of Anko Tubing E = Excellent G = Good F = Fair X = Not Recommended U = Untested Environment, % Conc.* w = Water alc = Alcohol * If concentration is not indicated, assume
PRODUCT DATA SHEET PDS A112_E. Metric thread M 1.5 pitch CEI EN CEI EN 50262
reduced cable entry Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262 Ref. P Fixing A B C L Light Hole min-max Spanner min-max Quantity Grey (mm) (mm) (mm) (mm) (mm) 1910S.M16N M16x1,5 16,5 4-7,5 19
Peek Chemical Resistance
Peek Chemical Resistance R = Resistant LR = Limited Resistance NR = Not Recommended ND = No Data Chemical Resistance 20 o C 60 o C 100 o C Acetaldehyde NR NR R Acetic acid (10%) R R R Acetic acid (glac./anh.)
NaOH CH 3 CO 2 H C 2 H 5 OH. NaCl H 2 SO 4. Technical. Technical. Chemical Resistance Terms of Sale
CH 3 CO 2 H NaOH NaCl C 2 H 5 OH H 2 SO 4 Technical Terms of Sale Technical Acetaldehyde C C A C1 A1 D A A Acetamide A A A D A1 C A A Acetate Solvent A A A B1 A A Acetic Acid: 80% A D D B1 A C D B 20%
Chemical Resistance Guide for Flowchem EPN
Chemical Resistance Guide for Flowchem EPN This guide is designed to aid in the proper selection of material for every job application. Exposure to over 250 chemicals are rated for specific temperature
The best material for original Eppendorf Tubes and Plates: Properties and chemical resistance of polypropylene
APPLICATION NOTE No. 056 I June 2013 The best material for original Eppendorf Tubes and Plates: Properties and chemical resistance of polypropylene Natascha Weiß, Susanne Pruszkowski, Eppendorf AG, Hamburg,
PRODUCT DATA SHEET PDS A4_E. Metric thread M 1.5 pitch CEI EN CEI EN 50262
Ref. Light Grey P Fixing A B C L Hole min-max Spanner min-max (mm) (mm) (mm) (mm) (mm) Quantity 1900.M12 M12X1,5 12,5 3,5-7 15 8 18-22 100 1900.M16 M16X1,5 16,5 5-10 19 8 22-27 100 1900.M20 M20X1,5 20,5
Liquid is assumed to be at saturated concentration in aqueous solution unless stated otherwise.
Chemical Resistance Data Note: The following tables are intended to serve only as your reference of materials, and are not intended to guarantee our products. When using the data in the tables, please
HSW NORM-JECT SYRINGES CHEMICAL RESISTANCE CHART
A Beer + + Acetic acid (10-60%) + O Benzaldehyde + O Acetic acid (1-10%) + + Benzene O - Acetic acid (80-100%) + O Benzene sulfonic acid + + Acetic anhydride + + Benzoic acid + Acetone + + Bismuth carbonate
Safety Manual > Incompatible Chemicals Partial Listing
Safety Manual > Incompatible Chemicals Partial Listing C. Incompatible Chemicals Partial Listing Chemical Incompatible Chemicals Acetic acid Chromic acid, nitric acid, permanganates, and peroxides Acetic
Chemical Resistance of PVC Products
The mechanism of chemical attack on thermoplastics in general, and PVC sheets in particular, differs significantly from the mechanism of corrosion of metals. Corrosion of metals results in a gradual loss
TAMMSFLEX SL / TAMMSFLEX NS
Acetic Acid, 10% 1 1 2 4 Acetic Acid, 50% 1 1 2 4 Acetic Acid, Glacial 1 4 - - Acetone 1 1 1 4 Acrylonitrile 2 4 - - Aluminum Sulfate(aq), 50% 1 1 1 1 Ammonium Chloride(aq), 50% 1 1 1 1 Ammonium Hydroxide(aq),
CHEMICAL RESISTANCE DATA FOR POLYETHYLENES
CHEMICAL RESISTANCE DATA FOR POLYETHYLENES [ R = Resistant LR= Low Resistance NR= Not Resistant] 23 o C 60 o C 23 o C 60 o C Acetaldehyde(100%) LR NR LR NR Acetic acid (10%) R R R R Acetic acid (50%) R
Solshield Hydrocarbon Gas Membrane Chemical Resistance Table
Symbol Key: + Resistant (polymer swelling property < 3 % or polymer mass decrease < 0,5 %, polymer extensibility is not substantially changed) / Limited resistance (polymer swelling property in the range
Chemical Polyurethane Polyethelyne PVC Nylon 11 Kynar
ACETIC ACID, GLACIAL 4 2 4-1 ACETIC ACID, 30% 4 1 4 2 1 ACETONE 4 2 4 1 4 ACETYLENE 1 4 1 1 1 ALKAZENE 4 - - - - ALUMINUM CHLORIDE (aq) 3 2 1-1 ALUMINUM NITRATE (aq) 3-2 - 1 AMMONIA ANGYDROUS 4 2 1-4 AMMONIA
Tube O Reactor. (Micro: Cat. # K, K, K) (Medi: Cat. # K, K, K)
453PR G-Biosciences 1-800-628-7730 1-314-991-6034 technical@gbiosciences.com A Geno Technology, Inc. (USA) brand name Tube O Reactor (Micro: Cat. # 786 024 4K, 786 024 8K, 786 024 15K) (Medi: Cat. # 786
Chemical Storage According to Compatibility
Chemical Storage According to Compatibility To lessen risk of exposure to hazardous chemicals, all chemicals should be separated and stored according to hazard category and compatibility. *Storage Groups
Revised Permeation Values for DuPont Tychem SL
Revised Permeation Values for DuPont Tychem SL Chemical Name Revised Permeation Values for DuPont Tychem SL (as of January, 2011) ACETIC ACID 64-19-7 >480 >480 ACETIC ANHYDRIDE 108-24-7 48 48 ACETONE 67-64-1
Safe Installation and Use of the NanoRam Immersion Probe
Safe Installation and Use of the NanoRam Immersion Probe Description: NanoRam Immersion Probe - 12 inch length; Immersion Probe Disposable Protective Sleeve Model Number: NR2-IMP; NR2-IMPS Part Number:
CHEMICAL RESISTANCE LIST
CHEMICAL RESISTANCE LIST The information provided is designed to be used as a guide and all information must be checked on a project basis. Data based upon room temperatures. Elevated temperatures will
Media Compatibility Guide PVC Valves
73 F (23 C) Valves WARNING This chart indicates the suitability of various elastomers and plastics for use with fluids to be conveyed. It should be used only as a guide for the selection of valve materials.
Fluid Compatibility Table
Acetaldehyde C A A A B D C A A Acetate Solvents A B A A D D A A Acetic Acid, crude C B A A D D A A Acetic Acid, pure D B A A D D A A Acetic Acid, 10% C B A A B D D A A Acetic Acid, 80% C B A A C D D A
Principal Investigator: Department: Laboratory room #s: Updated/revised: Chemical Name Amount Physical state Location Hazard Class
Chemical Inventory Principal Investigator: Department: Laboratory room #s: Updated/revised: Chemical Name Amount Physical state Location Hazard Class 1 SUGGESTED SHELF STORAGE PATTERN - ORGANIC Organic
Halar ECTFE chemical resistance chart
Technical Information Halar ECTFE chemical resistance chart Introduction Halar ECTFE is one of the most chemically resistant polymers available today. This chemical resistance is due to the chemically
8 Materials, Corrosion Resistance Tables
8 Materials, Corrosion Resistance Tables Included among the criteria for meter selection are the materials to be utilized. Of primary interest are those materials which come in contact with the measuring
Micro Float-A-Lyzer READY-TO-USE MICRODIALYSIS DEVICES. Product Information & Operating Instructions
Spectra/Por Micro Float-A-yzer EADY-TO-USE MICODIAYSIS DEVICES Product Information & Operating Instructions Table of Contents Introduction....................................1 Applications...................................2
Chemical Resistance. Suitable Suitability depends on operating conditions Unsuitable. Topchem 2000/2003. Milam PSS / Mica. Hygrade LS / PTFE.
Chemical Resistance A Klinger gasket materials can be selected from the following table. The following information should be used as a guide only. Please contact our Technical Services Department if in
Swell Sheet Chemical Resistance Guide
Swell Sheet Chemical Resistance Guide MULTI-SWELL 3760 Rev. 3/2018 LEAK-GARD 3750 KEY: A - Ideal for low pressure applications B - Fair, Depends on conditions; please contact Applications Engineering C
A freely accessible HNS data base
Improving Member States preparedness to face an HNS pollution of the Marine System (HNS-MS) A freely accessible HNS data base The HNS data base in a nutshell 120 HNS, described by 90+ data covering 6 main
Swell Sheet Chemical Resistance Guide
Swell Sheet Chemical Resistance Guide MULTI-SWELL 3760 Rev. 6/2016 LEAK-GARD 3750 KEY: A - Ideal for low pressure applications B - Fair, Depends on conditions; please contact Applications Engineering C
CHEMICAL RESISTANCE CHART
CHEMICAL RESISTANCE CHART The information in this chart has been supplied to Biotix by various reputable raw material manufacturers, and is to be used only as a guide in selecting products for appropriate
Sizes 48" x 96" (1.22m x 2.44m) Custom sheet sizes available upon request
Applications Decorative paneling Partitions Water features Signage Furniture Displays and more... Attributes Excellent UV properties High impact resistance - 17x greater than glass and 4x greater than
Spectra/Por. Float-A-Lyzer READY-TO-USE DIALYSIS DEVICES. Product Information & Operating Instructions
Spectra/Por Float-A-yzer G2 EADY-TO-USE DIAYSIS DEVICES Product Information & Operating Instructions Table of Contents Introduction....................................1 Applications...................................2
Watering Systems. Water and Chemical Reference Guide. Instruction # IM /06
Watering Systems. Water and Chemical Reference Guide Instruction # IM-030-06 07/06 Water quality Below are Lubing s recommendations for drinking water quality when using our watering systems: Description
CHEMICAL RESISTANCE LIST
CHEMICAL RESISTANCE LIST The resistance of plastic pipe materials to a wide range of chemical is listed in the tables of British Standard Code of practice 312: Part 1. The information provided is designated
APPENDIX C CHEMICALS USED IN CLANDESTINE DRUG LABS
APPENDIX C CHEMICALS USED IN CLANDESTINE DRUG LABS You must exercise extreme caution when ope at the scene of an illegal drug lab. Do not walk into, touch, or move chemicals or spilled material. Avoid
DRUM PUMP CHEMICAL RESISTANCE GUIDE & APPLICATION WORKSHEET
DRUM PUMP RESISTANCE GUIDE & APPLICATION WORKSHEET CRG 012516 1 DRUM PUMP RESISTANCE GUIDE & APPLICATION WORKSHEET The information in this Chemical Resistance Guide is to be used only as a general guide
Choosing the Right KLEENGUARD* Chemical Resistant Glove for the Job
Choosing the Right KLEENGUAR* Chemical Resistant Glove for the Job This guide presents the results of standard permeation testing and degradation ratings for Kimberly-Clark s family of KLEENGUAR* Chemical
MasterSeal M 452. Water based epoxy bituminous chemically resistant waterproofing membrane.
DEFINITION Water based two components epoxy bituminous water vapor permeable and chemically resistant waterproofing membrane. CONSUMPTION System Build 1: thickness 350 µm. Technique Product kg/m 2 Primer
SOLUZIONI PER L ENERGIA TERMICA THERMAL ENERGY SOLUTIONS
Table on chemical resistance of rubber materials Class 1 little or no effect Class 2 minor effect Class 3 moderate effect Class 4 severe effect Chemical Conc. Temp. EPDM NBR VITON % C Acetic acid 10 50
Chemical Resistance Chart for Plastic Labware Please see page 428 for table notes and guide to abbreviations.
ChaRts and more Chemical Resistance Chart for Plastic Labware Please see page 428 for table notes and guide to abbreviations. ChemiCal ldpe hdpe PP PmP Pmma PC PVC PS 20 o C 20 o C 20 o C 20 o C 20 o C
COPPER SHEATHED CABLE
COPPER SHEATHED CABLE CORROSION RESISTANCE OVERVIEW nvent PYROTENAX sheathed cables are noted for their general resistance to chemical corrosion as compared to most other metals. However, as with all metals,
Chemical Compatibility Guide Issue One
CNAF X Chemical Compatibility Guide Issue One Chemical Compatibility Guide Chieftain X, Centurion X, and Sentinel X compressed non asbestos fibre sheet gasket materials The following information is issued
INCOMPATIBILITY BETWEEN CHEMICALS
INCOMPATIBILITY BETWEEN S CODE SHR 301 Date: April 2009 Revision: 02 Page: 1 of 5 INCOMPATIBILITY BETWEEN S Products that could react violently with each other should not be stored together, particularly
Chemical Storage Guidelines
Storage Guidelines Do not store excess chemical containers on the benchtops, designate a storage location and return containers to that location after each use. Do not store chemicals in the fume hood.
Introducing New Functionalities in Liquid Stationary Phases in GC Columns for Confirming Organic Volatile Impurity Testing in Pharmaceutical Products.
Introducing New Functionalities in Liquid Stationary Phases in GC Columns for Confirming Organic Volatile Impurity Testing in Pharmaceutical Products. CHRISTOPHER M. ENGLISH, CHRISTOPHER S. COX, FRANK
Combustible Gas Catalytic Bead (0-100 %LEL) Part No FM Performance Certified 1,4 FM Performance Certified 1
Sensor Data Sheet Document No. 365-2211-31 (Rev D) Combustible Gas Catalytic Bead (0-100 %LEL) Part No. 823-0211-31 FM Performance Certified 1,4 FM Performance Certified 1 Minimum Indicated Concentration...
Molded/Machined Both Both Machined Machined Both Dielectric Strength V/mil D ,000
Material Properties Properties Units ASTM Test Method ABS Acetal CPVC G10-FR4 Halar (ECTFE) Molded/Machined Both Both Machined Machined Both Dielectric Strength V/mil D-149 812.8 500 1250 400 2,000 Elongation
Chemical Resistance Tables
AWWA MANUAL M23 Appendix A Resistance Tables resistance of PVC pressure water pipe Acetaldehyde N N Ammonia, liquid N N Acetaldehyde, aq 40% Ammonium fluoride, 25% R C Acetamide Ammonium salts, except
Proper Storage of Chemicals in Laboratories
Proper Storage of Chemicals in Laboratories Dr. Ideisan I. Abu-Abdoun Department of Chemistry UOS abuabdoun@sharjah.ac.ae UOS 28 - Feb. 2013 Contents Introduction Requirements Storage Facilities and Practices
WESTERN CONNECTICUT STATE UNIVERSITY CHEMICAL STORAGE AND COMPATIBILITY GUIDELINES PROCEDURE S-118
WESTERN CONNECTICUT STATE UNIVERSITY CHEMICAL STORAGE AND COMPATIBILITY GUIDELINES PROCEDURE S-118 Issued 6/4/02 Please direct any questions or comments about the applicability of this document to Luigi
Thanks for your interest, confidence and trust in ND Pharma & Biotech Products and Service.
ND Pharma & Biotech Co. Deuterated Solvents High quality Deuterated solvents are essential for satisfying the most rigorous demands of research and analyses. At ND Pharma & Biotech Co., we are passionate
DuPont Personal Protection Product Catalog
Page 1 of 7 Customer Service: 1-800-931-3456 or personalprotection@usa.dupont.com Tychem QC Style: QC526B Print Page Garment Description and Features Fully encapsulated suit, standard face shield (made
Color Availability Clear Standard colors stocked (thin gauge only) Custom colors available by special order.
Applications Aquariums Displays Fountains Projection screens Furniture Optical lenses Port hole windows Sight glass Scientific applications Point of purchase Vacuum chambers Bio-safety chambers and more...
CH CH. Thermo Scientific Labware Chemical Resistance Table. Effects of Chemicals. on Plastics
CH 3 CH CH 2 n Thermo Scientific Labware Chemical Resistance Table Effects of Chemicals on Plastics Interpretation of Chemical Resistance The Chemical Resistance Table that follows is a general guide only.
Chemical Resistance Chart for Tamco Tanks
PVC CPVC SANTOPRENE 316 SS ACETONE C C C C C C - A ACETALDEHYDE*/100% B C A B C C B A ACETIC ACID*/10% A A A A A A B A ACETIC ACID*/60% A B A A A A B A ACETIC ANHYDRIDE* C C - - C C A A AIR A A A A A A
Diverse transparante schermen van de Alsident systemen zijn van PETG-materiaal. Onderstaand een chemische resistentielijst van PETG.
Diverse transparante schermen van de Alsident systemen zijn van PETG-materiaal. Onderstaand een chemische resistentielijst van PETG. Resistentie: 1 = Bestendig, 2 = Beperkt bestendig, 3 = Niet bestendig
gerflor.com.au Stain chemicals
gerflor.com.au Stain resistance: list of chemicals PRODUCTS/ TIME MIPOLAM TARALAY TARALAY / WALL CONCENTRATED ACID Acetic acid - CH 3 -COOH 14 0 0 0 0-1d 0-1d 0-1d 1d 1d 2d 0 0 0-1d Hydrochloric acid -
McCAMPBELL ANALYTICAL INC Willow Pass Road Pittsburg CA
Comparison of VOC : s, Target Lists, MAI Acenaphthene 83-32-9 Acetalaldehyde (Ethanal) 75-07-0 Acetone 67-64-1 Acetonitrile 75-05-8 Acetophenone 96-86-2 Acrolein (Propenal) 107-02-8 Acrylamide 79-06-1
HAZARDOUS MATERIALS SURVEY. Note: List ALL virgin stock materials in current and projected inventories LAB NAME: PI: ADDRESS:
HAZARDOUS MATERIALS SURVEY Note: List ALL virgin stock materials in current and projected inventories LAB NAME: PI: ADDRESS: Please read each definition of the following Hazardous Materials carefully and
FUNDERMAX GMBH TEST REPORT
FUNDERMAX GMBH TEST REPORT SCOPE OF WORK SEFA 3 2010, 2.1 Analysis of Max Compact Interior Plus White and Black Plaques REPORT NUMBER 103600635GRR 001a ISSUE DATE 25 September 2018 PAGES 22 DOCUMENT CONTROL
OREGON Environmental Laboratory Accreditation Program ORELAP Fields of Accreditation ALS Environmental - Simi Valley
MATRIX Reference Code Analyte Code Description ASTM C471M- 14 2014 ASTM D5504-12 2012 3964 Orthorhombic Cyclooctasulfur 4842 1-Propanethiol 6113 2,5-Dimethylthiophene 4544 2-Ethylthiophene 4843 2-Propanethiol
Ferdowsi University of Mashhad
Spectroscopy in Inorganic Chemistry 2 Diatomic molecule C v and D h HCN H-H 3 contribution orbital electron Σ 0 σ 1 Π 1 π 1 Δ 2 δ 1 Φ 3 δ 1 Σ + Σ - 4 Linear molecule NO 2s+1 2 Π A 1 =Σ + 0 A 2 =Σ - 0 E
Spectroscopy in Inorganic Chemistry. Electronic Absorption Spectroscopy
Spectroscopy in Inorganic Chemistry Diatomic molecule C v and D h NO H-H 2 contribution orbital Σ 0 σ Π 1 π Δ 2 δ Φ 3 δ 3 Linear molecule NO 2s+1 2 Π A 1 =Σ + 0 A 2 =Σ - 0 E 1 =Π 1 E 2 =Δ 2 E 3 =Φ 3 4
TPE CHEMICAL RESISTANCE
PE CHEMICAL ESISANCE CONENS INODUCION OVEVIEW OF CHEMICAL ESISANCE CHEMICAL ESISANCE OF SEBS BASED PE COMPOUNDS CHEMICAL ESISANCE OF SEBS AW MAEIALS CONACS INODUCION Dryflex and Mediprene PE compounds
CHEMICAL RESISTANCE TABLE
Page 1 of 14 The data given in the extensive Table below is the current best state of information known to Nylact. Polymer compatibility with solvents other than those in this chart may arise: the General
DESIGN AND ENGINEERING DATA
Acetaldehyde, pure NR NR Acetic Acid, 50% NR NR Acetic Anhydride R NR Acetone,
Engineering Data. Noise Reduction Data
Noise Reduction Data The table below gives a comparison between stamped commercial bearings with standard steel shafts and precision bearings with urethane shaft adapters. An electric motor mounted under
Test Report For: FunderMax GmbH. MAX Resistance 2. SEFA , 2.1 Chemical/Stain Resistances
4700 Broadmoor SE, Suite 200 Kentwood, MI 49512 Telephone: 616-656-7401 Facsimile: 616-656-2022 www.intertek-etlsemko.com P.O. No.: MP Page 1 of 9 Test Report For: FunderMax GmbH MAX Resistance 2 SEFA
Chemical Permeation Guide
Chemical Permeation Guide What is permeation? Guidance on Chemical Permeation and Penetration Permeation is the process by which a potentially hazardous chemical moves through a material on a molecular
Improve lives IT S ABOUT IMPROVING PEOPLE S LIVES IT S ABOUT INTENT
THE DESIGNERS ROLE Different roles Improve lives IT S ABOUT IMPROVING PEOPLE S LIVES IT S ABOUT INTENT INTENT 1) DEFINE THE INTENT The road to hell THE ROAD TO HELL IS PAVED WITH GOOD INTENTIONS Toothbrush
Target Compound Results Summary
Phone/ (86)88-4800 / (86)88-471 http://www.emsl.com to1lab@emsl.com Customer ID: EMSL0A K12312.D 28 cc 0 0/01/2017 K12327.D 21 cc 600 Target Compound Results Summary Propylene 11-07-1 42.08 ND.0 ND 8.6
CHEMICAL RESISTANCE OF BELZONA 1523 FN10150
Organic Acids Inorganic Acids CHEICAL RESISTANCE OF BELZONA 1523 20% - Hydrochloric acid HCl 10% - 5% - (647-01-0) 3% - Nitric acid HNO 3 (7697-37-2) 10% - Nitrous acid HNO 2 (7782-77-6) 10% - hosphoric
EPA TO-17 Volatile Organic Compounds
EPA TO-17 Volatile Organic Compounds Method TO-17 is used to analyze samples for volatile organic compounds collected on multi-bed sorbent tubes, which are thermally desorbed and cryo-focused on the capillary
Gloves: choice and use
Gloves: choice and use Adopted April 15 th, 2003 Comité sectoriel de sécurité du Département de chimie Université Laval Wearing gloves: why? Gloves are worn for protection. However, gloves do not always
CHEMICAL RESISTANCE LIST
1,1,1 Trichloroethane C 2 H 3 CI 3 100 2-Butanoxim C 4 H 9 NO 100 COOH 1 60 COOH 5 COOH 5 60 COOH 10 COOH COOH 20 Acetone CH 3 COCH 3 100 Alaun KAl( ) 2 Aluminium Chloride AlCl 3 Aluminium Chloride AlCl
catalogue of thermoplastic Gears
catalogue of thermoplastic Gears Why thermoplastic gears. five reasons to switch to thermoplastic transmission gear. first lighter second CHeaPer third noiseless fourth self-lubricating fifth PerforManCe
BELZONA PRODUCT DATA M516 CHEMICAL RESISTANCE OF BELZONA 1591
Organic Acids Inorganic Acids BELZONA RODUCT DATA 516 CHEICAL RESISTANCE OF BELZONA 1591 10% * - Hydrochloric acid HCl 5% * - (647-01-0) 3% * - Nitric acid HNO 3 (7697-37-2) 10% * - Nitrous acid HNO 2
/ / /
www.growland.net / www.growland-hydroponics.com https://www.growland.fr / https://www.growland.co.uk https://www.growland.es / https://www.growland.at https://www.growland.nl / https://www.growland.it
FR CLOTHIN G FOR L ABORATORIES
FR CLOTHIN G FOR L ABORATORIES Personal protective equipment (PPE) for laboratory workers, including safety glasses or goggles, gloves, breathing masks, and lab coats, play an important role in lab safety.
PRODUCT DATA SHEET PDS A5_E
OMRESSION AE GANDS OYAMIDE A6.6 MAXIOK 1900 SERIES G THREAD ight Grey standard g thread DIN 40 430 1900.07 g 7 12,7 3,5-7 15 8 18-22 100 1900.09 g 9 15,5 5-8 19 8 22-26 100 1900.11 g11 18,8 5-10 22 8 23-28
stance et Helper Eppendorf Pipet Helper Chemical Resistance
stance et Helper Resistance N) Chemical Resistance Copyright 2017 Eppendorf AG, Germany. All rights reserved, including graphics and images. No part of this publication may be reproduced without the prior
LABORATORY SAFETY PLAN APPENDIX
LABORATORY SAFETY PLAN APPENDIX APPENDIX 1 REQUIRED CEE LAB ACCESS FORMS CEE Laboratory User Form As a laboratory user in the Department of Civil and Environmental Engineering at Northeastern University,