Lenntech Tel Fax

Transcription

1 Lenntech Tel Fax ION EXCHANGE RESINS Summarized Data Sheet

2 WATER TREATMENT Resins DE-ALKALIZATION DEMINERALIZATION SOFTENING Thermax Ion Exchange Quality is Our Commitment Resins Thermax Chemical Chemicals Division Specialty resins QUALITY POLICY We at Thermax Limited, Chemical Division hereby commit to develop, manufacture, deliver and apply Specialty Chemicals, Perance Chemicals in Oil Field, Fuel and Water Management to meet customer expectation. Further, we are committed to comply with the requirements of ISO 91 and continually improve the effectiveness of the Quality Management System by establishing and reviewing quality objectives. We shall ensure that quality policy is communicated and understood by all our employees. This policy shall be reviewed periodically for its continuing suitability. QUALITY OBJECTIVES Our Quality Objectives: Thermax Ion Exchange Quality is Our Commitment Resins ISO & OHSAS Certification Thermax Chemical Chemicals Division nuclear GRADE CATALYSIS FOOD PROCESSING MINING adsorbent GLUCOSE DEASHING MEG PURIFICATION SUGAR DECOLOURISATION biodiesel PURIFICATION METAL RECOVERY CHELATING JUICE DE-BITTERING pickling CONDENSATE POLISHING GROUND WATER REMEDIATION BIOTECH 1. To implement, maintain and continually improve Quality System as per requirements of the Quality Standard of ISO To achieve consistent Quality. 3. To enhance customer satisfaction. 4. To improve the effectiveness of existing processes. 5. To innovate products & processes to meet the customer needs. nsf oved appr ucts prod The World is Our Oyster

3 Softening Cation Exchange Resins T-4 T-42 T-52 Nuclear Sulphonic Nuclear Sulphonic Nuclear Sulphonic Settled Density Sodium / Sodium / Sodium / Na + ÒH + 1 5±3 High efficiency gel cation exchange resin, specifically for softening. Na + ÒH ±3 High capacity gel cation exchange resin, with optimum operating capacities. Na + Ò H ±3 High capacity gel cation exchange resin, with high operating capacities. Industrial and domestic water softening. Industrial and domestic softening at relatively low regeneration costs. Domestic softening for chlorinated DEMINERALIZATION Cation EXCHANGE RESINS T-42 CX-9 Weak Acid Polyacrylic CXO-12 Weak Acid Polyacrylic CXO-12 MP Weak Acid Polyacrylic Settled Density Na + ÒH ±3 High capacity gel cation exchange resin Nuclear Hydrogen / H + Sulphonic 8-84 H + with excellent physical and chemical properties. Carboxylic Hydrogen / Na + H + ÒNa ±3 High capacity acrylic weak acid cation Na + exchange resin with excellent physical H + and chemical stability H + Carboxylic Hydrogen / Carboxylic Hydrogen / H + ÒNa ±3 High capacity acrylic weak acid cation exchange resin with excellent physical and chemical stability H + ÒNa ±3 Macropous acrylic weak acid cation exchange resin with excellent physical and chemical stability. Softening, multiple and mixed bed demineralisation, dealkalization, chemical processing etc. Water deionization, selective heavy metal removal. Softening of high salinity waters in sodium cycle. Water deionization, dealkalization selective heavy metal removal. Softening of high salinity waters in sodium cycle. Water deionization, dealkalization selective heavy metal removal. Softening of high salinity waters in sodium cycle. DEMINERALIZATION ANION EXCHANGE RESINS A-23 I Settled Density Chloride / CI - ÒOH ±3 Tough gel, strong base type I anion exchange resin. Excellent physical and chemical properties. Multiple and mixed bed deionization, silica removal. Also applied in process stream purification along with Tulsion T-42.

4 DEMINERALIZATION ANION EXCHANGE RESINS A23P A-32 A-27 MP A-27 Gel A-36 Gel A-36 MP A-2X MP Weak Base A-1X MP Weak Base Polyacrylic II II ph Range Chloride / Chloride / Chloride / Chloride / Chloride / Chloride / Tertiary Amine Free Base / Polyamine Free Base / % Approx CI - ÒOH ±3 Porous strong base type I anion exchange resin. Excellent physical and chemical properties. CI - ÒOH ±3 Tough gel, II strong base anion exchange resin. Excellent physical and chemical properties. CI - ÒOH ±3 Macroporous strong base type I anion exchange resin with excellent physical and chemical stability and resistance to organic fouling CI - ÒOH - 9 5±3 Tough gel, strong base type I anion exchange resin. Excellent physical and chemical properties. CI - ÒOH ±3 High efficient & durable type II, strong base exchange resin having excellent operating capacity & regeneration effciency at equivalent regeneration level. CI - ÒOH - 9 5±3 Macroporous strong base type II anion exchange resin having high regeneration efficiency and resistance to organic fouling. FB - ÒCI ±3 Macroporous weak base anion exchange resin, excellent regeneration efficiency. Resistance to organic fouling. FB - ÒCI ±3 Macroporous acrylic weak base anion exchange resin with high organic removal efficiency. Multiple and mixed bed deionization, silica removal. Multiple bed deionization Mulitiple bed deionization, delalkalization and silica removal. Multiple mixed bed deionization silica removal also applied in stream purification along with Tulsion T -42. Besides its primary aplication in water treatment it is also used in de-alkalization process. Multiple bed deionization, dealkalization. Deionization of high EMA waters. Deacidification and deionization of high EMA, high organics MIXED BED RESINS MB-14 MB-16 MB-18 (BG) MB-18 P MB-115 (BG) / / / / / LI + /OH - ph Range / /1. LI + /OH / / / / / / / /1. % Approx NA Intimate strong acid T-46 LI + and strong base A-33 OH containing in a 1:2 volume ratio. NA Intimate strong acid T-46 LI + and strong base A-33 OH containing in a 1:2 volume ratio. NA High purity mixed bed resin with highly Effective separation. Volume ratio 1:2 (T-46 Black : A-33 Gold). NA Intimate of strong acid T-46 H + and strong base I (A-33) OH in a 1:2 volume ratio. NA Intimate of stong acid T-46 H + and strong base I (A-33) OH in a 1:1:5 volume ratio. Final polishing of circulating water in nuclear industry. Final polishing of circulating water in nuclear industry Used in high purity water applications. Used in high purity water applications. For production of ultra pure

5 MIXED BED RESINS MB-115 MB-114 Strong base / / I / / / /1. NA Intimate of stong acid T-46 H + and strong base I (A-33) OH in a 1:1:5 volume ratio. NA Intimate of stong acid T-46 H + and strong base II (A-32) OH in a 1:2 volume ratio. For production of ultra pure For production of ultra pure CONDENSATE POLISHING RESINS T-48 Strong acid T-5 Strong acid T-52 Strong acid T-42 MP Strong acid A-21 A-21 MP Hydrogen =nil / meq/gm NA NA 6 ±5 Strong acid cation exchange resin supplied in powder Hydrogen / Na + ÒH ±3 Strong acid cation exchange resin having (85%) 8-84 controlled particle size cut. Hydrogen / Na + ÒH ±3 Higher cross-linked strong acid cation exchange resin having excellent resistance Quatemary Quatemary Hydrogen Sodium /12 H Na 28/14 Na H Chloride (82%) Chloride Carbonate (82%) 5-52 H H Na Na + 175/ /8 CI Na + ÒH ±3H + 53±3 Na to oxidizing agents and temperature Macroporous strong acid cation exchange resin with excellent physical and chemical characteristics CI ÒOH 2 53±3 Strong base gel I anion exchange resin with excellent bead strength and controlled particle size CI ÒOH 1 58±3 Macroporous strong base I anion exchange resin with superior bead strength and controlled particle size. Condensate polishing deploying precoat filter process High flow, deep bed condensate polishing Multiple & mixed bed demineralization operating under rigorous conditions High flow condendate polishing, continuous lon exchange systems and chemical processing High flow, deep bed condensate polishing High flow, deep bed condensate polishing NUCLEAR GRADE ION EXCHANGE RESINS T-46 Strong acid A-33 Quatemary Lithium Hydrogen / Hydroxide / Na + ÒH + 7 5±3 52±3 Strong acid cation exchange resin having a minimum of 99% of its exchange sites in H + /Li + with high bead strength. CI ÒOH 2 7±3 Strong base gel I anion exchange resin having minimum 9% of its exchange sites in OH and less than 1% sites in CI with high bead strength. Treatment of circulating water in nuclear industry Treatment of circulating water in nuclear industry

6 CATALYTIC GRADE ION EXCHANGE RESINS T-56 MP Strong acid T-38 Strong acid T-3825 Strong acid T-62MP Strong acid T-63 MP Strong acid T-66MP Strong acid T 383 Strong acid A-74 MP A-33 A-8X MP Weak Base T-6812 MP (Dry) Strong acid copolymer Settled Density Hydrogen / Hydrogen / Hydrogen / (98%) Hydrogen / (97%) (meq / dry gm) Hydrogen (96%) 265/ (meq / dry gm) Hydrogen / (97%) (meq /dry gm) Hydrogen / Quatemary Hydroxide / Quatemary Hydroxide / Tertiary Amine Free Base / Na + ÒH ±3 Macroporous catalytic grade strong acid cation exchange resin supplied in wet. Also supplied in dry containing moisture less than 2% Na + ÒH ±3 High purity, low cross linked strong acid cation exchange Na + ÒH ±3 High purity, low cross linked strong acid cation exchange NA 1 Specially developed resin for phenol alkylation Cataysis of organic reactions in aqueous and non-aqueous media Catalyst for Bisphenol A reactions. Catalyst for Bisphenol A reactions. Phenol Alkayation, lsoboryl acetate synthesis. Reaction of non-poiar media. NA 1 High Porosity resin Phenol Alkayation, lsoboryl acetate synthesis. Reaction of non-poiar media. NA 1 Resin with low porosity and high phenol Alkayation, for reaction surface area of relatively polar reactants. NaÒH 11 65±3 Promoted catalyst supplied in wet Bisphenol-A synthesis CIÒOH 21 6±3 Macroporous catalytic grade type I Condensation type of reaction strong base anion. CIÒOH 2 7±3 Catalytic grade type I strong base Aldol condensation type anion. reactions FBÒCI 18 55±3 Macroporous catalytic grade weak base anion exchange resin. MEG purification and deacidification of aqueous and non-aqueous media Nuclear sulphonic Hydrogen / High Porosity resin Phenol alkylation, esterification reactions ADSORBENT RESINS ADS-4 ADS-6 ADS-8 ADS 8 EP Polyacrylic adsorbent adsorbent adsorbent adsorbent structure Polyacrylic copolymer group NIL NA (9%) NIL NA (85%) Paricle size mm ph range Specific Surface Area m 2 /gm(min.) settle density / / NIL NA / NIL NA / content NA 62±3 High organic removal capacity Removal of hydrophilic chemicals from Industrial waters NA 55-6 High organic removal capacity Removal of hydrophilic chemicals from Industrial waters NA resin with high organic removal capacity NA resin with high organic removal capacity Removal of hydrophilic chemicals from Industrial waters Removal of hydrophilic chemicals from Industrial waters

7 SPECIAL GRADE ION EXCHANGE RESINS structure A-62MP Cross linked A-23P (Sulphite) A-3 MP Cross linked Polyacrylic A-72 MP CH-87 Chelating Cross linked CH-9 Chelating CH-93 Chelating Cross linked CH-95 Chelating CH-97 Chelating Cross linked CH-99 Chelating Cross linked A 72 MP (HP) T-IRR T-4213 MP Strong acid copolymer A-2X MP R Weak base anion Cross linked group Quarternary Quarternary Quarternary Quarternary Paricle size mm ph range Total exchange capacity (meg/ml.min) settle density Chloride / Sulfite / Chloride / Chloride / Flouride selective / Imminodiacetic acid Amino methyl phosphoric Sodium / Sodium / Isothiouronium Chloride / meq/ml Methylene thiol Chloride / mg Hg/l Polyhydroxy amine Chloride / type I Chloride / N/A N/A /8-14 N/A Sulphonic Hydrogen / Tertiary amine Free base / swelling content 52±3 Premium grade resin for nitrate removal food grade version for potable water treatment is also available Selective removal of nitrate from industrial water and domestic drinking water For disolved oxygen removal Dissolved oxygen removed for very low conductivity water requirements. 67±3 Acrylic resin with high organic removal capacity CIÒOH 2 6±3 Macroporous strong base I anion exchange resin with controlled pore size NA 45±3 Selective removal of fluoride from water HÒNa 3 +/- 5% HÒNa 35-4% 48±3 Special resin for selective removal of transition metals 5±3 Special resin having more pronounced affinity for Ca+& Mg than IDA type resin 5±3 Special resin for selective removal of mercury NA 4±3 Selective removal of mercury, regenerable resin Decolorization of aqueous solution, sugar melt Decolorization Tanin removal from ground water used for color removal from sugar syrup. removal of flouride from domestic drinking Brine purification in chloro alkali industry. Brine decalcification in chloro alkali industries. Used for mercury removal from effluent in Chloro -alkali industry. Removal of mercury in Chloro - alkali industry. NA 45±2 Selective removal of Boron Removal of Boron from industrial CLÒOH High porosity / High mechanical strength macroporous strong base anion exchange resin 5±5 it is premium grade resin media designed to provide greater matrix porosity & excellent catalytic properties to remove iron from ground H ÒNa 1% max. FB to Cl -- 2% 5 +/- 3 Macroporous cation exchange resin 47 +/- 3 High capacity macroporous weak base anion exchange resin. Removal of colloidal silica. Used in semiconductor, medical & pharmaceutical field Removal of dissolved iron (Fe II) from potable water / ground sugar de-ashing Deionization of high EMA waters

8 A Commitment To Quality Every batch of Tulsion Ion Exchange resin is manufactured under carefully controlled process parameters and follows a rigorous quality assurance protocol covering every raw material, intermediate stage products and all batches of final product. All the engineers, operators and scientists take great care in processing every batch of resin to ensure that the produced lot of resin meets the high standard of quality that we specify and commit to customer. Every Tulsion ion exchange resin product is developed by a team of experienced R&D scientists, manufactured by qualified production engineers, inspected by ever cautious QAC chemists and commissioned by expert technical services group so that the customers can use them without any hassles over a longer period of time. We are proud to be a company that develop and supply customer specific products with tailor made specifications on exclusive basis for a variety of end applications. We believe greatly in system oriented working style, safe working conditions as well as environmental safety. As an obvious result, Thermax s chemical division manufacturing facility is certified for ISO 91-28, ISO and OHSAS TULSION ion exchange resins are available in standard packing size as follows: Fibre Drums Polyethylene lined HDPE bags Super Sacks Polyethylene lined HDPE bags Super Sacks MS Drum HDPE Drum : 7 cft. : 1 cft. : 4 cft. : 25 ltr. : 1 ltrs. : 18 ltr. : 2 ltr. The data included herein are based on test ination obtained by Thermax. These data are believed to be reliable but do not imply any warranty or perance guarantee. We recommend that the users determine perance by testing on their processing equipment. We assume no liability or responsibility for patent infringement resulting from the use of any of our product. In view of our constant endeavor to improve the quality of our products, we reserve the right to alter or change specifications without prior notice. Thermax Limited Lenntech info@lenntech.com Tel Fax