Energy is the capacity to do work

Size: px

Start display at page:

Download "Energy is the capacity to do work"

Diana Carter
6 years ago
Views:

1 1 of 10 After completing this chapter, you should, at a minimum, be able to do the following. This information can be found in my lecture notes for this and other chapters and also in your text. Correctly answer all of the questions suggested above and in the quiz for this chapter. Define basic terms such as thermodynamics, energy, system, surroundings, open system, closed system, isolated system, work, heat, PV work, internal energy, potential energy, kinetic energy, translational energy, vibrational energy, rotational energy, spin energy, state function, path function, extensive properties, intensive properties, conservation of energy, enthalpy, standard conditions, enthalpy of reaction, heat of reaction, standard enthalpy of formation, Hess's law, entropy, standard entropy, spontaneous, non-spontaneous, Gibbs free energy, standard Gibbs free energy of formation. Understand thermodynamic sign conventions. Articulate the three laws of thermodynamics. 5. Describe various types of enthalpy. 6. Calculate the heat of reaction using both Hess's law and enthalpies of formation. 7. Calculate the entropy of phase change. 8. Calculate the entropy change for a reaction using standard enthalpies. 9. Express the temperature dependance of reaction spontaneity when given enthalpy and entropy information. 10. Calculate the Gibbs free energy change for a reaction using enthalpy and entropy information or using standard Gibbs free energy of formation values. 1 Calculate the equilibrium constants for reactions for which the Gibbs free energy change of reaction is known. I. Enthalpy A. Thermodynamics: the study of the transformations of energy, especially the transformation of heat into work and work into heat Ultimately energy considerations determine whether or not a reaction will occur, how rapidly it will occur, the products formed, and the equilibrium state of the reaction Energy is the capacity to do work

2 2 of 10 B. System and surroundings System: the part of the universe under observation Surroundings: the rest of the universe, the place from which the system is observed Types of systems Open system: can exchange matter and energy with the surroundings C. Closed system: can exchange energy but not matter with the surroundings Isolated system: cannot exchange either matter or energy with the surroundings Work and heat: there are two ways in which the energy of a closed system can be exchanged, by transferring energy either as work or heat Work: a transfer of energy that can be used to change the height of a weight somewhere in the surroundings Heat: a transfer of energy as a result of a temperature difference between a system and its surroundings In chemistry work is most often performed as the consequence of a gas expanding against an external pressure This kind of work is called PV work or expansion work D. Internal energy (U, E): is equal to the sum of all of the potential and kinetic energies of all of the particles in the system: internal energy is the grand total energy in the system Potential energy and chemical potential energy Kinetic energy at a molecular level: translational, vibrational, rotational, and spin energies When a system undergoes any physical or chemical change, the change in its internal energy is directly related to any heat gained or lost by the system and to any work done to or by the system ΔU = U f - U i = q + w i ii w: work done by or on the system; w = PΔV q: heat emitted or absorbed by the system Sign conventions Heat flow from surroundings to system: q > 0 (+q) Heat flow system to surroundings: q < 0 (-q) Work done by surroundings on system: w > 0 (+w)

3 3 of 10 Work done by system on surroundings: w < 0 (-w) iv. Implications If q > 0 and w > 0 then ΔU > 0 If q < 0 and w < 0 then ΔU < 0 If q < 0 and w > 0 or if q > 0 and w < 0 then the sign of ΔU depends Internal energy is a state function, e., it depends only on the present state of the system and not on how the state was arrived at As compared to a path function Altitude versus distance traveled to reach that altitude 5. 1st law: the internal energy of an isolated system is constant Energy is conserved (the law of conservation of energy) E. Defining enthalpy (H; from Greek "enthalpein" meaning "to warm," or, "heat inside") Enthalpy cannot be measured directly but the change in enthalpy of a system can be measured ΔH = H f - H i = ΔU + PΔV At constant pressure ΔH = q p If we assume ΔU = q + w and the system does PΔV work on the surroundings then, at constant pressure, ΔU = q p - PΔV = ΔH - PΔV There are various types of enthalpy: processes which result in a heat-related change in the internal energy of the system at constant presure Phase change - ΔH vaporization, ΔH fusion, ΔH sublimation, et Ionization Electron affinity - the enthalpy of electron gain Bond enthalpies e. Enthalpies of formation: the change in enthalpy for the reaction that forms 00 mole of a compound from the elements with all substances in their standard states, usually at 298 K Enthalpies of formation: elaboration and examples Examples i C (s) + 2 H 2 (g) -> CH 4 (g) ; ΔH f = -78 kj/mol 2 C (s) + 3 H 2 (g) + 1/2 O 2 (g) -> C 2 H 5 OH (l) ; ΔH f =

4 4 of 10 kj/mol By definition the standard enthalpy of formation of the most stable form of any element is zero C (s, graphite) : 0.0 kj/mol; C (s, diamond) : 9 kj/mol; C (g) : kj/mol i Br 2 (l) : 0.0 kj/mol; Br 2 (g) : 30.9 kj/mol Can use standard enthalpy of formation values to calculate enthalpies of reaction: ΔH rxn = Σ n ΔH f prod - Σ n ΔH f rxt Calculate the ΔH rxn for the combustion of 00 mole of propane C 3 H 8 (g) + 5 O 2 (g) -> 3 CO 2 (g) + 4 H 2 O (l) ΔH f (kj/mol) C 3 H 8 (g) O 2 (g) 0.0 CO 2 (g) -395 H 2 O (l) ΔH rxn = [(3 moles)(-395 kj/mol) + (4 moles)( kj/mol)] - [(1 mole)(-1085 kj/mol) + (5 moles)(0.0 kj/mole)] ΔH rxn = kj/ mole propane i Calculate the ΔH rxn for the combustion of 00 grams of benzene C 6 H 6 (l) + 15/2 O 2 (g) -> 6 CO 2 (g) + 3 H 2 O (l) Note that enthalpy is an extensive property, e. it is related to amount, so fractional coefficients *may* be used in balancing thermochemical equations ΔH f (kj/mol) C 6 H 6 (l) O 2 (g) 0.0 CO 2 (g) -395 H 2 O (l) ΔH rxn = [(6 moles)(-395 kj/mol) + (3 moles)( kj/mol)] - [(1 mole)(-49.0 kj/mol) + (15/2 moles)(0.0 kj/mole)] e. ΔH rxn = kj/mole benzene

5 5 of 10 f. (-3267 kj/mole)(1 mole / 78 g) = -48 kj/g benzene II. Entropy A. Two observations The expansion of a gas from areas of high concentration to areas of low concentration is spontaneous, and although it is statistically possible for the gas particles to spontaneously re-order themselves, the likelihood is very low unless work is done by the surrounding on the system The flow of heat from a system that is higher in temperature than it's surroundings is spontaneous, and to reheat the system once the heat is lost requires a transfer of heat from the surroundings to the system Energy tends to disperse chaotically (in a random manner) B. Entropy: a measure of the dispersal of matter and energy (S) Entropy is a synonym for the extent of chaotic dispersal of matter and energy Entropy is also a measure of the randomness or disorder in a system Entropy is a state property ΔS = S f - S i C. The Second Law The entropy of an isolated system increases during a spontaneous reaction Or: the total entropy of a system and it's surroundings always increases during a spontaneous reaction For a spontaneous process at a given temperature (K), at equilibrium ΔS = q/t This permits calculation of ΔS for phase changes transition q ΔS s-> l + + l -> g + + s -> g + + g -> l - - l -> s - - g -> s - - At constant pressure q p = ΔH so at equilibrium ΔS = ΔH/T where ΔH is the enthalpy of the particular phase change under observation Note that the calculation of values of ΔS for phase changes indicate the change in entropy that results from the transition, not the entropy of either the initial or final state e. Examples

6 6 of 10 i What is the change in entropy associated with the melting of 00 mole of ice at 0 C? ΔS = ΔH melt / T m = kj/mol / 272 K = +29 J/K What is the change in entropy associated with the condensation of 00 mole of water at 100 C? ΔS = -ΔH vap / T b = kj/mol / 372 K = J/K D. Are chemical reactions spontaneous? At equilibrium ΔS = ΔH/T ======> ΔH/T -ΔS = 0 ======> ΔH - TΔS = 0 Assume constant temperature and pressure ΔH - TΔS < 0 spontaneous ΔH - TΔS > 0 nonspontaneous ΔH - TΔS = 0 equilibrium Implications -ΔH, +ΔS +ΔH, -ΔS -ΔH, -ΔS, +ΔH, +ΔS always spontaneous nonspontaneous depends on T E. The Third Law The entropy of a perfect crystalline material at T = 0K is zero Or: a substance that is perfectly crystalline at 0K has S = 0 Or: 0K can never be reached, since all molecular motion would have to stop The Three Laws restated You can't win, you can only break even. You can only break even at absolute zero. You can never reach absolute zero. F. Standard entropies also known as absolute entropies S is the entropy value for species in their standard state at 1 atm and a specific temperature, often 293 K or 298 K (see Table 19.1, p. 812 or Appendix C) The elements in their elemental states do not have zero entropy values as is the case with enthalpies of formation; this is as stated by the 3rd Law. G. Calculating ΔS Estimation: will ΔS be "+" or "-" for a reaction? ΔS is positive if a reactant molecule is broken into two or more product

7 7 of 10 molecules, as is the case in decomposition reactions H 2 CO 3 (aq) -> CO 3 (g) + H 2 O (l) ΔS is positive if the number of moles of gas in the product side is greater than the number of moles of gas on the reactant side C 3 H 8 (g) + 5 O 2 (g) -> 3 CO 2 (g) + 4 H 2 O (l) Formal calculations: require tables of standard entropy values (Appendix C, p. 1112) and follow the equation ΔS rxn = Σ n ΔS prod - Σ n ΔS rxt Calculate ΔS for the synthesis of ammonia from the elements N 2 (g) + 3 H 2 (g) -> 2 NH 3 (g) i ii N 2 (g) : 195 J/mol K; H 2 (g) : J/mol K; NH 3 (g) : 193 J/mol K ΔS rxn = [(2 moles)(193 J/mol K)] - [(1 mole)(195 J/mol K) + (3 moles)(130.6 J/mole K)] iv. ΔS rxn = -197 J/K What is ΔS for the combustion of ethanol? C 2 H 5 OH (l) + 3 O 2 (g) -> 2 CO 2 (g) + 3 H 2 O (l) i ii C 2 H 5 OH (l) : 161 J/mol K; O 2 (g) : 205 J/mol K; CO 2 (g) : 217 J/mol K; H 2 O (l) : J/mol K ΔS rxn = [(2 moles)(217 J/mol K) + (3 moles)(69.91 J/mole K)] - [(1 mole)(161 J/mol K) + (3 moles)(205 J/mol K)] iv. ΔS rxn = J/K III. Gibbs free energy and spontaneity A. B. C. As previously demonstrated, the spontaneity of a reaction can be predicted if ΔH and ΔS for the reaction are known The thermodynamic property defined by enthalpy, entropy, and temperature is called Gibbs Free energy according to the relationship ΔG = ΔH - TΔS At a given temperature and pressure, if ΔG is negative the reaction will be spontaneous At a given temperature and pressure, if ΔG is positive the reaction will be nonspontaneous At a given temperature and pressure, if ΔG is zero the reaction is at equilibrium For a reaction the value of ΔG gives the maximum amount of non-expansion (e., nonpv) work that can be obtained from a system undergoing change at a constant temperature and pressure

8 8 of 10 Proof e. f. g. h. non PV work = w' w = w' - PΔV ΔG = ΔH - TΔS ΔG = ΔU + PΔV - TΔS ΔG = q + w + PΔV - TΔS ΔG = q + w' - PΔV + PΔV - TΔS = q + w' - TΔS Since ΔS = q/t then q = TΔS and ΔG = TΔS + w' - TΔS ΔG = w' D. An example: Given the reaction H 2 (g) + 1/2 O 2 (g) -> H 2 O (l) (ΔG = -237 kj) in a fuel cell, the formation of 0 mole of water can generate 237 kj of electrical energy The difference between ΔG and ΔH is that energy must be discarded by the system into the surroundings as heat to ensure that the process is spontaneous and can produce work, especially non-pv work ΔG represents the energy free for use in non-expansion work, hence the name "free energy" ΔG is a measure of the "driving force" of a reaction The values of ΔG for individual compounds is a relative index of their stability E. Calculations with ΔG Calculating ΔG from ΔH and ΔS Calculate ΔG for the combustion of methane at 25 C CH 4 (g) + 2 O 2 (g) -> CO 2 (g) + 2 H 2 O (g) ΔH f (kj/mol) ΔS (J/mol K) CH 4 (g) O 2 (g) CO 2 (g) H 2 O (l) source (BLB) Appendix C, p e. ΔH f = [(1 mole)(-395 kj/mol) + (2 moles)( kj/mol)] - [(1 mole)(-79 kj/mol) + (2 moles)(0.0 kj/mole)] = kj ΔS = [(1 mole)(217 J/mol K) + (2 moles)(69.91 J/mol K)] - [(1 mole)(186.1 J/mol K) + (2 moles)(205 J/mole K)] = -246 J/K

9 9 of 10 f. ΔG = ΔH - TΔS = (-802 kj) - ( K)(-5.00 J/K) = kj Calculating ΔG from standard free energy of formation values: ΔG rxn = Σ n ΔG prod - Σ n ΔG rxt Standard free energy of formation: the free energy change that occurs when 1 mole of substance is formed from the elements in their most stable states at 1 atm and a specific temperature (usually 25 C) A table of these values is found in Appendix C, p ff CH 4 (g) + 2 O 2 (g) -> CO 2 (g) + 2 H 2 O (g) CH 4 (g) : kj/mol O 2 (g) : 0 kj/mol CO 2 (g) : -394 kj/mol H 2 O (g) : kj/mol ΔG rxn = [(1 mol)(-394 kj/mol) + (2 mol)( kj/mol) - [(1 mol)(-50.8 kj/mol) + (2 mol)(0 kj/mol)] = kj F. ΔG and equilibrium ΔG for a reaction can be calculated from the data in thermodynamic tables when all reactants and products are in their standard states If reactants/products are in non-standard states then an adjusted value of ΔG can be calculated: ΔG = ΔG + RT ln Q 5. At equilibrium ΔG = 0 and Q = K, therefore 0 = ΔG + RT ln K ΔG = -RT ln K (R = J/mol K) Example 1 Given the Haber process, if ΔG = -33 kj/mol, calculate ΔG for a reaction mixture of 00 atm nitrogen, 00 atm nitrogen, and 0.50 mole ammonia, all at 25 C Q = P NH3 2 / P N2 P H2 3 = (0.50) 2 / (1) (3) 3 = 9.26 x 10-3 ΔG = ΔG + RT ln Q = (-33 kj) + (8.314 J/mol K) (298 K) ln (9.26 x 10-3 ) = -49 kj/mol 6. Example 2 Calculate K p at 25 C for the Haber process At equilibrium ΔG = 0 and Q = K p, therefore 0 = ΔG + RT ln K p Since ΔG = -RT ln K p, K p = exp(-δg / RT ) K p = exp[-(-33 kj) / (8.314 x 10-3 kj/mol K) (298 K)] = e 14 = 6.87 x A note on the relationship between ΔG and K

10 10 of 10 If ΔG < 0 then K > 1, product-favored If ΔG > 0 then K < 1, reactant-favored If ΔG = 0 then K = 1, eqb G. The dependence of ΔG on temperature If we assume ΔH and ΔS are independent of temperature then ΔG can be calculated at any temperature using ΔG = ΔH - TΔS Example 1 Calculate ΔG for the Haber process at -100 C and 500 C (ΔH = -935 kj/mol, ΔS = J/K) At -100 C (173 K): ΔG = ΔH - TΔS = (-935 kj/mol) - (173 K)( x 10-3 kj/mol K) = kj/mol At 500 C (773 K): ΔG = ΔH - TΔS = (-935 kj/mol) - (773 K)( x 10-3 kj/mol K) = 60.9 kj/mol Example 2 At what temperature will this reaction be at equilibrium? (K = 1, ΔG = 0): T = K [Chemistry 1220 Index Page] Last Modified 01/05/ :57:49

Chemistry 123: Physical and Organic Chemistry Topic 2: Thermochemistry

Chemistry 123: Physical and Organic Chemistry Topic 2: Thermochemistry Recall the equation. w = -PΔV = -(1.20 atm)(1.02 L)( = -1.24 10 2 J -101 J 1 L atm Where did the conversion factor come from? Compare two versions of the gas constant and calculate. 8.3145 J/mol K 0.082057