Philadelphia University Civil Engineering Department
|
|
|
- Jeffery Norris
- 5 years ago
- Views:
Transcription
1 Philadelphia University Civil Engineering Department MATERIALS SCIENCE IN CIVIL ENGINEERING CONSTRUCTION MATERIALS (670214) DR. AHMAD AL-FRAIHAT 10/25/2017 Dr.Ahmad Alfraihat 1
2 Course No. : Course Title : Materials of Construction Credit Hrs : 3 Prerequisite Course : The structure of material, powerful atomic and energy relationship, structure and properties of the nucleus,electron shells, and Radioactivity, General classification and structure of materials, atomic of bonds, solid state structure, metallic crystals and defects, polymers structure,elastic and plastic deformation, crack, creep, fatigue. Bonding materials, cement and aggregate, quality water, admixtures, fresh concrete properties, concrete operation mixing, handing, placing, compacting concrete,curing concrete,design of concrete mixes, testing of concrete and bricks working 10/25/2017 Dr.Ahmad Alfraihat 2
3 Role of Material Science in CE Combining several sciences Chemistry Physics Mechanics Behavioral understanding of materials is based on knowledge of these sciences. 10/25/2017 Dr.Ahmad Alfraihat 3
4 Predicting Behavior Civil Engineers design complex systems using relationships between Stress vs. Strength Strain vs. Deflection Exposure vs. Durability Risk vs. Consequence Cost vs. Aesthetics & Life Cycle Others 10/25/2017 Dr.Ahmad Alfraihat 4
5 CHAPTER-1 STRUCTURES OF MATTER -Introduction -Properties of atoms and molecules -Electron shells -Radioactivity -bonds Dr.Ahmad. Alfraihat 10/25/2017 Dr.Ahmad Alfraihat 5
6 Materials Science Atomic nature of materials Microstructure Relationship between material structure and engineering properties Altered structures to customize properties 10/25/2017 Dr.Ahmad Alfraihat 6
7 Measurement of Properties and Testing Standards Consensus Standards Government Standards Industry Standards Research Standards 7 10/25/2017 Dr.Ahmad Alfraihat
8 STRUCTURE OF MATTER 10/25/2017 Dr.Ahmad Alfraihat ۸
9 STATE OF MATTER 10/25/2017 Dr.Ahmad Alfraihat 9
10 STATES AND PROPERTIES OF MATTER 10/25/2017 Dr.Ahmad Alfraihat 10
11 STATES AND PROPERTIES OF MATTER 10/25/2017 Dr.Ahmad Alfraihat 11
12 STATES AND PROPERTIES OF MATTER 10/25/2017 Dr.Ahmad Alfraihat 12
13 PROPERTIES OF ATOMS AND MOLECULES 10/25/2017 Dr.Ahmad Alfraihat 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 RADIOACTIVITY 10/25/2017 Dr.Ahmad Alfraihat 24
25 25
26 26
27 MAJOR RADIATIONS 10/25/2017 Dr.Ahmad Alfraihat 27
28 Using radiations INDUSTRIES INDUSTRIES 10/25/2017 Dr.Ahmad Alfraihat 28
29 Properties of materials 10/25/2017 Dr.Ahmad Alfraihat 29
30 ATOMIC BONDS 10/25/2017 Dr.Ahmad Alfraihat 30
31 BONDS 10/25/2017 Dr.Ahmad Alfraihat 31
32 BONDS 10/25/2017 Dr.Ahmad Alfraihat 32
33 33
34 34
35 35
36 Bonding 10/25/2017 Dr.Ahmad Alfraihat 36
37 Bonding 10/25/2017 Dr.Ahmad Alfraihat 37
38 38
39 39
40 CHAPTER- 2 STRUCTURES OF SOLID MATERIALS -Classifications of materials -Types of solids materials -Crystal structures -Defects of metallic structure Ferrous and non ferrous metals -Ceramic structures Classifications and properties of ceramic 10/25/2017 Dr.Ahmad Alfraihat 40
41 41
42 42
43 TYPES OF SOLIDS 10/25/2017 Dr.Ahmad Alfraihat 43
44 44
45 STRUCTURES OF CRYSTALS 10/25/2017 Dr.Ahmad Alfraihat 45
46 STUCTURES OF CRYSTALS 10/25/2017 Dr.Ahmad Alfraihat 46
47 47
48 48
49 49
50 50
51 51
52 52
53 53
54 54
55 55
56 56
57 57
58 58
59 59
60 60
61 61
62 62
63 63
64 64
65 65
66 66
67 67
68 68
69 69
70 70
71 71
72 72
73 73
74 74
75 75
Materials for Civil and Construction Engineers CHAPTER 2. Nature of Materials
Materials for Civil and Construction Engineers CHAPTER 2 Nature of Materials Bonds 1. Primary Bond: forms when atoms interchange or share electrons in order to fill the outer (valence) shells like noble
Hardened Concrete. Lecture No. 16
Hardened Concrete Lecture No. 16 Fatigue strength of concrete Modulus of elasticity, Creep Shrinkage of concrete Stress-Strain Plot of Concrete At stress below 30% of ultimate strength, the transition
MATERIALS FOR CIVIL AND CONSTRUCTION ENGINEERS
MATERIALS FOR CIVIL AND CONSTRUCTION ENGINEERS 3 rd Edition Michael S. Mamlouk Arizona State University John P. Zaniewski West Virginia University Solution Manual FOREWORD This solution manual includes
Plastometry for the Self-Compacting Concrete Mixes
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Plastometry for the Self-Compacting Concrete Mixes To cite this article: V Lapsa et al 2015 IOP Conf. Ser.: Mater. Sci. Eng. 96
five Mechanics of Materials 1 ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2017 lecture
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2017 lecture five mechanics www.carttalk.com of materials Mechanics of Materials 1 Mechanics of Materials MECHANICS MATERIALS
MMJ1133 FATIGUE AND FRACTURE MECHANICS E ENGINEERING FRACTURE MECHANICS
E ENGINEERING WWII: Liberty ships Reprinted w/ permission from R.W. Hertzberg, "Deformation and Fracture Mechanics of Engineering Materials", (4th ed.) Fig. 7.1(b), p. 6, John Wiley and Sons, Inc., 1996.
How materials work. Compression Tension Bending Torsion
Materials How materials work Compression Tension Bending Torsion Elemental material atoms: A. Composition a) Nucleus: protons (+), neutrons (0) b) Electrons (-) B. Neutral charge, i.e., # electrons = #
Fracture mechanics fundamentals. Stress at a notch Stress at a crack Stress intensity factors Fracture mechanics based design
Fracture mechanics fundamentals Stress at a notch Stress at a crack Stress intensity factors Fracture mechanics based design Failure modes Failure can occur in a number of modes: - plastic deformation
Period #1 : CIVIL MATERIALS COURSE OVERVIEW
Period #1 : CIVIL MATERIALS COURSE OVERVIEW A. Materials Systems to be Addressed Metals and Alloys (steel and aluminum) Portland Cement Concrete Asphalt Cement Concrete Fiber Reinforced Composites Masonry
Application of Thermal Stress Device for Measuring Thermal Stresses
Application of Thermal Stress Device for Measuring Thermal Stresses *Sang-Lyul Cha 1) and Jin-Keun Kim 2) 1), 2) Department of Civil Engineering, KAIST, Daejeon 305-600, Korea 1) maikuraki@kaist.ac.kr
MATERIALS. Why do things break? Why are some materials stronger than others? Why is steel tough? Why is glass brittle?
MATERIALS Why do things break? Why are some materials stronger than others? Why is steel tough? Why is glass brittle? What is toughness? strength? brittleness? Elemental material atoms: A. Composition
Analysis of Non-Linear Dynamic Behaviours in Asphalt Concrete Pavements Under Temperature Variations
ENOC 2017, June 25 30, 2017, Budapest, Hungary Analysis of Non-Linear Dynamic Behaviours in Asphalt Concrete Pavements Under Temperature Variations Amal Abdelaziz *, Chun-Hsing Ho *, and Junyi Shan * *
Johns Hopkins University What is Engineering? M. Karweit MATERIALS
Why do things break? Why are some materials stronger than others? Why is steel tough? Why is glass brittle? What is toughness? strength? brittleness? Elemental material atoms: MATERIALS A. Composition
Numerical Simulation on Concrete Pouring Process of Self-Compacting Concrete-Filled Steel Tube
Numerical Simulation on Concrete Pouring Process of Self-Compacting Concrete-Filled Steel Tube B.H. Qi Building Research Institute, Angang Construction Group, Anshan Liaoning, China J.Z. Fu& S. Yan School
Haleh Azari, Ph.D. AASHTO Materials Reference Laboratory (AMRL) AASHTO Subcommittee on Materials Meeting August 2007
Haleh Azari, Ph.D. AASHTO Materials Reference Laboratory (AMRL) AASHTO Subcommittee on Materials Meeting August 2007 AMRL Research Program Mission Meet the Research and Standards Needs of the AASHTO Member
8/1/2009. CAE 7962 Presentation
CAE 7962 Presentation Gavin Patey Dameion Moores Aaron Henstridge Ashley Burke Brendan Harvey Fabio Faragalli Introduction Choosing mesh properties Explanation of the types of studies available and the
MECHANICAL AND RHEOLOGICAL PROPERTIES
MECHANICAL AND RHEOLOGICAL PROPERTIES MECHANICAL PROPERTIES OF SOLIDS Extension Shear δ τ xy l 0 l l 0 θ σ Hooke's law σ = Eε Hooke's law τ = G γ xy xy MECHANICAL AND RHEOLOGICAL PROPERTIES RHEOLOGICAL
Assoc. Prof. Dr. Ruta MINIOTAITE
KAUNAS UNIVERSITY OF TECHNOLOGY, LITHUANIA VAPOUR PERMEABILITY AND WATER ABSORPTION OF DIFFERENT EXTERIOR PAINT SYSTEMS Assoc. Prof. Dr. Ruta MINIOTAITE Increasing focus on the durability aspects of buildings
12/8/2009. Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka
Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Introduction and classes of properties Case studies showing selection of the right material for the job Deformation of material under the action of a
Numerical Prediction of Crack Width in Massive Concrete Member due to Heat of Hydration
Graduate Member School due to of Heat Environmental of Hydration Studies Nagoya University Maruyama Laboratory Numerical Prediction of Crack Width in Massive Concrete Ingi Jang * 1 Ippei Maruyama* 1 *
Metropolitan Community College COURSE OUTLINE FORM LAB: 3.0
Metropolitan Community College COURSE OUTLINE FORM Course Title: Nuclear Plant Operation II Course Prefix & No.: LEC: PROT - 2420 3.0 COURSE DESCRIPTION: LAB: 0 Credit Hours: 3.0 This course introduces
Chapter. Materials. 1.1 Notations Used in This Chapter
Chapter 1 Materials 1.1 Notations Used in This Chapter A Area of concrete cross-section C s Constant depending on the type of curing C t Creep coefficient (C t = ε sp /ε i ) C u Ultimate creep coefficient
Thermal properties of Engineering Materials
Thermal properties of Engineering Materials Engineering materials are important in everyday life because of their versatile structural properties. Other than these properties, they do play an important
What we should know about mechanics of materials
What we should know about mechanics of materials 0 John Maloney Van Vliet Group / Laboratory for Material Chemomechanics Department of Materials Science and Engineering Massachusetts Institute of Technology
NON-UNIQUENESS OF MICRO DEFORMATION OF ASPHALT CONCRETE
Performance Testing and Evaluation of Bituminous Materials 483 NON-UNIQUENESS OF MICRO DEFORMATION OF ASPHALT CONCRETE L.B. Wang, Louisiana State University/Southern University, USA Ching S. Chang, University
2002 Design Guide Preparing for Implementation
2002 Preparing for Implementation By Monte Symons 2003 NCUAPG Annual Meeting Excerpts from the 2002 Guide Implementation Package 2002 Presentation Overview Need for NCHRP 1-37A - Status Guide Basics Asphalt
MMJ1133 FATIGUE AND FRACTURE MECHANICS A - INTRODUCTION INTRODUCTION
A - INTRODUCTION INTRODUCTION M.N.Tamin, CSMLab, UTM Course Content: A - INTRODUCTION Mechanical failure modes; Review of load and stress analysis equilibrium equations, complex stresses, stress transformation,
THE NUMERICAL MODELLING AND ANALYSIS OF RC CRACKED STRUCTURES
THE NUMEICAL MODELLING AND ANALYSIS OF C CACKED STUCTUES Maciek J. MINCH, Aleksander TOCHANOWSKI Technical University of Wroc³aw, Faculty of Civil Engineering, 50-377 Wroc³aw, pl. Grunwaldzki 11, bud.c-7,
Mechanical Models for Asphalt Behavior and Performance
Mechanical Models for Asphalt Behavior and Performance All Attendees Are Muted Questions and Answers Please type your questions into your webinar control panel We will read your questions out loud, and
Structure-Property Correlation [2] Atomic bonding and material properties
![Structure-Property Correlation [2] Atomic bonding and material properties](/thumbs/84/89142752.jpg "Structure-Property Correlation [2] Atomic bonding and material properties")
MME 297: Lecture 05 Structure-Property Correlation [2] Atomic bonding and material properties Dr. A. K. M. Bazlur Rashid Professor, Department of MME BUET, Dhaka Topics to discuss today... Review of atomic
Geotechnical Engineering I CE 341
Geotechnical Engineering I CE 341 What do we learn in this course? Introduction to Geotechnical Engineering (1) Formation, Soil Composition, Type and Identification of Soils (2) Soil Structure and Fabric
High Temperature Materials. By Docent. N. Menad. Luleå University of Technology ( Sweden )
Course KGP003 Ch. 12 High Temperature Materials By Docent. N. Menad Dept. of Chemical Engineering and Geosciences Div. Of process metallurgy Luleå University of Technology ( Sweden ) Ceramic materials
3. Which dynasty ruled Bengal for long 400 years? Who was the founder of this dynasty?
, ' University of Asia Pacific Department of Basic Sciences and Humanities Mid Semester Examination, Fall 2016 Program: B.Sc. Engineering (Civil) 2 d year 1st semester Course Title: Bangladesh Studies:
Basic Examination on Assessing Mechanical Properties of Concrete That Has Suffered Combined Deterioration from Fatigue and Frost Damage
5th International Conference on Durability of Concrete Structures Jun 30 Jul 1, 2016 Shenzhen University, Shenzhen, Guangdong Province, P.R.China Basic Examination on Assessing Mechanical Properties of
CE 715: Advanced Strength of Materials
CE 715: Advanced Strength of Materials Lecture 1 CE 715 Course Information Instructor: Tasnim Hassan Office: Mann Hall 419 Office Hours: TTh 2:00-4:00 pm Phone: 515-8123 Email: thassan@eos.ncsu.edu 1 Course
Evaluation and comparison of estimated wave elastic modulus of concrete, using embedded and surface bonded PZT sensor/actuator systems
Evaluation and comparison of estimated wave elastic modulus of concrete, using embedded and surface bonded PZT sensor/actuator systems Presented by: Ayumi Manawadu, Ph.D. student Zhidong Zhou, Ph.D. student
Frontiers of Fracture Mechanics. Adhesion and Interfacial Fracture Contact Damage
Frontiers of Fracture Mechanics Adhesion and Interfacial Fracture Contact Damage Biology, Medicine & Dentistry The Next Frontiers For Mechanics One of the current challenges in materials & mechanics is
MODELING THE EFFECTIVE ELASTIC MODULUS OF RC BEAMS EXPOSED TO FIRE
Journal of Marine Science and Technology, Vol., No., pp. -8 () MODELING THE EFFECTIVE ELASTIC MODULUS OF RC BEAMS EXPOSED TO FIRE Jui-Hsiang Hsu*, ***, Cherng-Shing Lin**, and Chang-Bin Huang*** Key words:
Creep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete
Creep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete Eshan V. Dave Andrew F. Braham Prof. William G. Buttlar Prof. Glaucio H. Paulino CONCREEP8, Ise-Shima, Japan
Stone Age (40,000 to 100,000 yrs ago): Stone tools, clay pots, skin
UTM UNIVERSITI TEKNOLOGI MALAYSIA COURSE LEARNING OBJECTIVES Introduce the field of Materials Science and Engineering 1. INTRODUCTION & ATOMIC STRUCTURE Provide introduction to the classification of materials
Concrete pathologies. Concrete chemical degradation causes. Alkali-silica reaction in concrete
Concrete pathologies The concrete is not an inert material: LABORATORY AND MICROSTRUCTURAL TESTS ON THE DETECTION AND PREDICTION OF AAR António Santos Silva 1 & Isabel Fernandes 2 1 - Materials Department,
Temperature Dependent and Independent Material Properties of FGM Plates
Temperature Dependent and Independent Material Properties of FGM Plates K. Swaminathan 1, D. M. Sangeetha 2 1,2 (Department of Civil Engineering, National Institute of Technology Karnataka, India) Abstarct:
Understanding. Solid State Physics. Sharon Ann Holgate. CRC Press Taylor & Francis Group Boca Raton London NewYork
Understanding Solid State Physics Sharon Ann Holgate (И CRC Press Taylor & Francis Group Boca Raton London NewYork CRC Press is an imprint of the Taylor & Francis Group, an informa business A TAYLORS FRANCIS
Prajapati et al, International Journal of Advanced Engineering Research and Studies E-ISSN
Research Paper FEW ASPECTS OF DURABILITY OF GEOPOLYMER CONCRETE CONTAINING METALLIZED PLASTIC WASTE H. R. Prajapati¹, A. Bhogayata² and Dr. N. K. Arora 3 Address for Correspondence ¹P. G. Student Applied
Unit title: Polymer Chemistry
Unit title: Polymer Chemistry Unit code: L/601/0415 QCF level: 5 Credit value: 15 Aim This unit enables learners to gain an understanding of aspects of the structure, reaction mechanisms and polymer preparations.
Mechanics of Earthquakes and Faulting
Mechanics of Earthquakes and Faulting www.geosc.psu.edu/courses/geosc508 Surface and body forces Tensors, Mohr circles. Theoretical strength of materials Defects Stress concentrations Griffith failure
ELASTOPLASTIC STEEL BEAM BENDING ANALYSIS BY USING ABAQUS
11 ELASTOPLASTIC STEEL BEAM BENDING ANALYSIS BY USING ABAQUS Biswajit Jena * * Corresponding author: biswa.tech88@gmail.com Abstract: In recent years tremendous efforts have been made in development of
ISSN: ISO 9001:2008 Certified International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 4, July 2013
Delamination Studies in Fibre-Reinforced Polymer Composites K.Kantha Rao, Dr P. Shailesh, K. Vijay Kumar 1 Associate Professor, Narasimha Reddy Engineering College Hyderabad. 2 Professor, St. Peter s Engineering
POE Practice Test - Materials
Class: Date: POE Practice Test - Materials Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A student weighs 150 lbs and is standing on a beam which spans
A Spatial FEM Model of Thermal and Mechanical Action in RCC dam
Copyright 2011 Tech Science Press SL, vol.5, no.3, pp.147-155, 2011 A Spatial FEM Model of Thermal and Mechanical Action in RCC dam M. S. Jaafar 1, J. Noorzaei 1,2, A. A. Abdulrazeg 1, T. A. Mohammed 1
Measuring the Effectiveness of Cure Materials
National Concrete Consortium Embassy Suites, Indianapolis, In Measuring the Effectiveness of Cure Materials Dan G. Zollinger, Ph.D., P.E. Professor, Texas A&M University Zachry Department of Civil Engineering
AMRITA VISHWA VIDYAPEETHAM DEPARTMENT OF CHEMICAL ENGINEERING AND MATERIALS SCIENCE. PhD Entrance Examination - Syllabus
AMRITA VISHWA VIDYAPEETHAM DEPARTMENT OF CHEMICAL ENGINEERING AND MATERIALS SCIENCE PhD Entrance Examination - Syllabus The research being carried out in the department of Chemical Engineering & Materials
NCEES Fundamentals of Engineering (FE) Examination OTHER DISCIPLINES EXAM SPECIFICATIONS. Effective Beginning with the April 2010 Examinations
NCEES Fundamentals of Engineering (FE) Examination OTHER DISCIPLINES EXAM SPECIFICATIONS Effective Beginning with the April 2010 Examinations The FE examination is an 8-hour supplied-reference examination:
Note: For further information, including the development of creep with time, Annex B may be used.
..4 Creep and shrinkage ()P Creep and shrinkage of the concrete depend on the ambient humidity, the dimensions of the element and the composition of the concrete. Creep is also influenced by the maturity
Course Description. * LC: Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship
* : Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship ** FN: Foundation; UG: Undergraduate; DP: Diploma; : Master; CR: Certificate Course
CHEMICAL ADMIXTURES FOR CONCRETE
CHEMICAL ADMIXTURES FOR CONCRETE Definition: what are chemical admixtures? The definition of RILEM (International Union of Testing and Research Laboratories for Materials and Structures) is: Admixtures
1.033/1.57 Mechanics of Material Systems (Mechanics and Durability of Solids I)
Mechanics of Material Systems (Mechanics and Durability of Solids I) Franz-Josef Ulm If Mechanics was the answer, what was the question? Traditional: Structural Engineering Geotechnics Structural Design
NEW NUMERICAL MODELS FOR BEHAVIOUR OF STEEL AND CONCRETE STRUCTURES EXPOSED TO FIRE
COST Action TU0904 Integrated Fire Engineering and Response Training school University of Malta, Sliema, 11.-14. April 2012. Scientific project: Reliability of Structures and Risk Assesment to Extreme
Lecture 2 Atomic Structure. Dr. Firas Farhan
Lecture 2 Atomic Structure Dr. Firas Farhan 1 Materials scientists and engineers have developed a set of instruments in order to characterize the structure of materials at various length scales. We can
Material History. Is American culture currently being defined
Introduction ti to Materials What Are Materials? Substances out of which all things are made Currently MatWeb Material Property Data website lists over 76,000 individually unique materials What materials
Determining the Moisture Content in Limestone Concrete by Gamma Scattering Method: A Feasibility Study
Determining the Moisture Content in Limestone Concrete by Gamma Scattering Method: A Feasibility Study NDE2002 predict. assure. improve. National Seminar of ISNT Chennai, 5. 7. 12. 2002 www.nde2002.org
Accelerated Loading Evaluation of Base & Sub-base Layers
Accelerated Loading Evaluation of Base & Sub-base Layers Zhong Wu, Ph.D., P.E. Louisiana Transportation Research Center (LTRC) April 2006 What is Accelerated Loading? Accelerated loading refers to Accelerated
Laboratory 4 Bending Test of Materials
Department of Materials and Metallurgical Engineering Bangladesh University of Engineering Technology, Dhaka MME 222 Materials Testing Sessional.50 Credits Laboratory 4 Bending Test of Materials. Objective
Fig. 1. Different locus of failure and crack trajectories observed in mode I testing of adhesively bonded double cantilever beam (DCB) specimens.
a). Cohesive Failure b). Interfacial Failure c). Oscillatory Failure d). Alternating Failure Fig. 1. Different locus of failure and crack trajectories observed in mode I testing of adhesively bonded double
A SIMPLE TWO-STAGE MODEL FOR SIMULATING DRYING SHRINKAGE VS. MASS-LOSS EVOLUTION OF CONCRETE
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-8 J.G.M. Van Mier, G. Ruiz, C. Andrade, R.C. Yu and X.X. Zhang (Eds) A SIMPLE TWO-STAGE MODEL FOR SIMULATING
Materials Science and Engineering at Michigan State
Materials Science and Engineering at Michigan State Material Science and Engineering Overview Material Engineering: applies chemistry, physics, biology, and mathematics to engineer atomic structure/architecture
UNDERGRADUATE COURSES. Department of Chemical Engineering (Ch.E.)
Faculty of Engineering UNDERGRADUATE COURSES Department of Chemical Engineering (Ch.E.) Ch.E.: L-1, T-1 Chem 111: Inorganic Chemistry 3.00 Credit (3 hrs/wk) Modern concept of atomic structure, Periodic
Mechanics of Earthquakes and Faulting
Mechanics of Earthquakes and Faulting Lectures & 3, 9/31 Aug 017 www.geosc.psu.edu/courses/geosc508 Discussion of Handin, JGR, 1969 and Chapter 1 Scholz, 00. Stress analysis and Mohr Circles Coulomb Failure
Materials and Structures
Journal of Mechanics of Materials and Structures AGING DEGRADATION OF MECHANICAL STRUCTURES Somasundaram Valliappan and Calvin K. Chee Volume 3, Nº 1 December 28 mathematical sciences publishers JOURNAL
Department of Civil Engineering
UNDERGRADUATE COURSE DESCRIPTIONS Constructional Drawing and Technical Mapping 2 Cr. Introduction to the concept of engineering drawing, orthographic drawing sketching, sections and conventions. Pictorial
Yuko Ogawa, Ryoichi Sato and Kenji Kawai Institute of Engineering, Hiroshima University, Japan
Early Age Deformation, its Resultant Stress and Creep Properties of Concrete with and without Internal Curing Subjected to High Temperature History at an Early Age Yuko Ogawa, Ryoichi Sato and Kenji Kawai
A FINITE ELEMENT MODEL FOR SIZE EFFECT AND HETEROGENEITY IN CONCRETE STRUCTURES
A FINITE ELEMENT MODEL FOR SIZE EFFECT AND HETEROGENEITY IN CONCRETE STRUCTURES Roque Luiz Pitangueira 1 and Raul Rosas e Silva 2 1 Department of Structural Engineering -Federal University of Minas Gerais
NUMERICAL EVALUATION OF THE ROTATIONAL CAPACITY OF STEEL BEAMS AT ELEVATED TEMPERATURES
8 th GRACM International Congress on Computational Mechanics Volos, 12 July 15 July 2015 NUMERICAL EVALUATION OF THE ROTATIONAL CAPACITY OF STEEL BEAMS AT ELEVATED TEMPERATURES Savvas Akritidis, Daphne
Mechanistic-Empirical Pavement Design Guide Distress Models
Mechanistic-Empirical Pavement Design Guide Distress Models By: Mohamed El-Basyouny Arizona State University Pavement Performance Models Symposium Laramie - Wyoming June 23, 2006 Outline Analysis Methodology
CHAPTER 10. Characteristics of the Surfaces of Biomaterials
CHAPTER 10 Characteristics of the Surfaces of Biomaterials 10.1 Surface Characteristics Related to Chemical Bonding 10.2 Surface Chemistry Related to Bonding of Biological Molecules 10.3 Porosity 10.4
Roadway Grade = m, amsl HWM = Roadway grade dictates elevation of superstructure and not minimum free board requirement.
Example on Design of Slab Bridge Design Data and Specifications Chapter 5 SUPERSTRUCTURES Superstructure consists of 10m slab, 36m box girder and 10m T-girder all simply supported. Only the design of Slab
Impact of Uneven Solder Thickness on IGBT Substrate Reliability
Impact of Uneven Solder Thickness on IGBT Substrate Reliability Hua Lu a, Chris Bailey a, Liam Mills b a Department of Mathematical Sciences, University of Greenwich 30 Park Row, London, SE10 9LS, UK b
Numerical Simulation of Fatigue Crack Growth: Cohesive Zone Models vs. XFEM
Numerical Simulation of Fatigue Crack Growth: Cohesive Zone Models vs. XFEM Thomas Siegmund Purdue University 1 Funding JOINT CENTER OF EXCELLENCE for ADVANCED MATERIALS, FAA Cooperative Agreement 04-C-AM-PU.
MECHANICAL PROPERTIES OF MATERIALS
1 MECHANICAL PROPERTIES OF MATERIALS Pressure in Solids: Pressure in Liquids: Pressure = force area (P = F A ) 1 Pressure = height density gravity (P = hρg) 2 Deriving Pressure in a Liquid Recall that:
ME 025 Mechanics of Materials
ME 025 Mechanics of Materials General Information: Term: 2019 Summer Session Instructor: Staff Language of Instruction: English Classroom: TBA Office Hours: TBA Class Sessions Per Week: 5 Total Weeks:
F7. Characteristic behavior of solids
F7. Characteristic behavior of solids F7a: Deformation and failure phenomena: Elasticity, inelasticity, creep, fatigue. à Choice of constitutive model: Issues to be considered è Relevance? Physical effect
Correlation between setting, heat evolution, and deformations of cementitious binder systems depending on type and amount of superplasticizer
Correlation between setting, heat evolution, and deformations of cementitious binder systems depending on type and amount of superplasticizer 1 Schmidt W 1 * 1 BAM Federal Institute for Materials Research
Pavement Design Where are We? By Dr. Mofreh F. Saleh
Pavement Design Where are We? By Dr. Mofreh F. Saleh Pavement Design Where are We?? State-of-Practice State-of-the-Art Empirical Mechanistic- Empirical Mechanistic Actual Current Practice?? Inputs Structure
Towards The. Design of Super Columns. Prof. AbdulQader Najmi
Towards The Design of Super Columns Prof. AbdulQader Najmi Description: Tubular Column Square or Round Filled with Concrete Provided with U-Links welded to its Walls as shown in Figure 1 Compression Specimen
Mechanistic Pavement Design
Seminar on Pavement Design System and Pavement Performance Models Reykjavik, 22. 23. March, 2007 Mechanistic Pavement Design A Road to Enhanced Understanding of Pavement Performance Sigurdur Erlingsson
ENMA - ENGINEERING, MATERIALS
ENMA - Engineering, Materials 1 ENMA - ENGINEERING, MATERIALS ENMA150 Materials of Civilization (3 Credits) The discovery of new materials has shaped history and built civilizations. The utilization, properties
Sri Satya Sai University of Technology and Medical Sciences, Sehore(M.P.)
Advanced Mathematics MTSD 101 Unit 1 : Partial Differential Equation Solution of Partial Differential Equation (PDE) by separation of variable method, Numerical solution of PDE (Laplace, Poisson s, Parabola)
General Chemistry I & Lab
General Chemistry I & Lab Course Text/Materials Chang, Raymond. General Chemistry: The Essential Concepts, 6th edition, McGraw-Hill, 2010, ISBN: 9780077354718 [Students may find used, new, or rental copies
Cracking in Quasi-Brittle Materials Using Isotropic Damage Mechanics
Cracking in Quasi-Brittle Materials Using Isotropic Damage Mechanics Tobias Gasch, PhD Student Co-author: Prof. Anders Ansell Comsol Conference 2016 Munich 2016-10-12 Contents Introduction Isotropic damage
ALACPA-ICAO Seminar on PMS. Lima Peru, November 2003
ALACPA-ICAO Seminar on PMS Lima Peru, 19-22 November 2003 Airport Pavements FWD/HWD Testing and Evaluation By: Frank B. Holt Vice President Dynatest International A/S Dynamic Testing The method of FWD/HWD
CHAPTER 10. Characteristics of the Surfaces of Biomaterials
CHAPTER 10 Characteristics of the Surfaces of Biomaterials 10.1 Surface Characteristics Related to Chemical Bonding 10.2 Surface Chemistry Related to Bonding of Biological Molecules 10.3 Porosity 10.4
MODELING GEOMATERIALS ACROSS SCALES JOSÉ E. ANDRADE DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING EPS SEMINAR SERIES MARCH 2008
MODELING GEOMATERIALS ACROSS SCALES JOSÉ E. ANDRADE DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING EPS SEMINAR SERIES MARCH 2008 COLLABORATORS: DR XUXIN TU AND MR KIRK ELLISON THE ROADMAP MOTIVATION
FATIGUE MODEL FOR STEEL FIBER-REINFORCED CONCRETE
FATIGUE MODEL FOR STEEL FIBER-REINFORCED CONCRETE Paulo B. Cachim 1, Joaquim A. Figueiras 2, and Paulo A.A. Pereira 3 1 Departamento de Engenharia Civil, Universidade de Aveiro Campus de Santiago, 3810
Structural Analysis. For. Civil Engineering.
Structural Analysis For Civil Engineering By www.thegateacademy.com ` Syllabus for Structural Analysis Syllabus Statically Determinate and Indeterminate Structures by Force/ Energy Methods; Method of Superposition;
Introduction to Structural Member Properties
Introduction to Structural Member Properties Structural Member Properties Moment of Inertia (I): a mathematical property of a cross-section (measured in inches 4 or in 4 ) that gives important information
Impact of Healing. Self healing in bituminous materials. Lab. Field. log N ,845
Impact of Healing Self healing in bituminous materials N 18.3 C E* f 3.291 0,845 t 0? Lab. Field log N Healing Mechanism Step 1: Interfacial Wetting Step 2: Intrinsic healing d t, X dt a b = fn (healing
Probabilistic models of construction materials Prof. Liudmyla Trykoz
Probabilistic models of construction materials Prof. Liudmyla Trykoz Ukrainian State University of Railway Transport, Kharkiv, Ukraine The subject of our research is properties of building materials. The
EARLY AGE THERMAL CRACK CONTROL IN MASS CONCRETE
EARLY AGE THERMAL CRACK CONTROL IN MASS CONCRETE A.W.R.M.G.W.D.B. Girihagama * and S.M.A. Nanayakkara University of Moratuwa, Colombo, Sri Lanka *E-mail: danu.girihagama.uom @ gmail.com, TP: +94711352729
Mechanistic Investigation of Granular Base and Subbase Materials A Saskatchewan Case Study
Mechanistic Investigation of Granular Base and Subbase Materials A Saskatchewan Case Study Curtis Berthelot, P. Eng. Department of Civil and Geological Engineering University of Saskatchewan 57 Campus