Mechanical Models for Asphalt Behavior and Performance
|
|
- Griffin Garrett
- 6 years ago
- Views:
Transcription
1 Mechanical Models for Asphalt Behavior and Performance
2 All Attendees Are Muted
3 Questions and Answers Please type your questions into your webinar control panel We will read your questions out loud, and we ll address as many questions as allows.
4 Can t find the GoToWebinar Control Panel?
5 Download today s presentations Please view today s reminder for a link to the presenter s slides. After the webinar, you will receive a link to the recording of today s session. 5
6 The Transportation Research Board has met the standards and requirements of the Registered Continuing Education Providers Program. Credit earned on completion of this program will be reported to RCEPP. A certificate of completion will be issued to participants that have registered and attended the entire session. As such, it does not include content that may be deemed or construed to be an approval or endorsement by NCEES or RCEPP.
7 PDH Certificate Information This webinar is valued at 2 Professional Development Hours (PDH). Instructions on retrieving your certificate will be found in your webinar reminder and follow-up s. You must register and attend as an individual to receive a PDH certificate. TRB will report your hours within one week. Questions? Contact Lisa Marflak: LMarflak@nas.edu
8 Today s Panelists and Moderator Eshan Dave, University of Minnesota, Duluth, evdave@d.umn.edu Amit Bhasin, University of Texas at Austin, a-bhasin@mail.utexas.edu Richard Kim, North Carolina State University, kim@ncsu.edu
9 About the webinar series The focus of these webinars is to: review the basic terms associated with mechanistic models so that the end users may effectively use these models, better appreciate the advantages of using mechanical models, develop a broader understanding of how mechanistic models work, and exemplify the use of models to solve specific problems faced by the asphalt materials and pavements community.
10 About the webinar series The webinars are not intended to: demonstrate the theoretical development of a model or models, or present the mathematical development of different models.
11 About the webinar series Current and future plan for webinar series Introduction to the building blocks of mechanistic models (this webinar) Overview of approaches to modeling damage in asphalt materials and pavements (December 2012) Exemplify the use of models to characterize cracking, rutting, moisture damage, etc. (future)
12 Mechanical Models for Asphalt Behavior and Performance Basics of Asphalt Modeling 1 Transportation Research Board webinar organized by:
13 Introduction Overall goal of this webinar is education Learning Objectives: Differences between modeling of asphalt concrete as compared to traditional civil engineering materials Stress-strain behavior of viscoelastic materials Differences between linear and non-linear viscoelastic behavior as well as elastic and plastic behavior Applications to solve boundary value problems Typical tests for viscoelastic characterization
14 Outline 1. Challenges in characterization of asphalt materials and pavements 2. Elastic versus viscoelastic response of materials 3. Linear viscoelasticity and superposition principle 4. Typical tests and terminology
15 1. Challenges Asphalt materials are visco-elasto-plastic heterogeneous composites with thermorheologically simple behavior Asphalt binders behave as: viscous fluids at high temperatures elastic solids at very low temperatures viscoelastic at intermediate temperatures Aggregates behave as elastic solids
16 1. Challenges +64 º C -22 º C New pavement 20 yr old pavement
17 1. Challenges The behavior of asphalt mix is quite complicated due to: viscoelastic and temperature dependent behavior of binder mismatch in properties of binder and aggregates effects of aggregate shape and texture macro and micro-scale interaction between particles and mastic In this webinar we will limit our discussions to the linear behavior, that is, no damage or cracking or failure
18 1. Challenges Standard strength of materials approach is often inadequate Need to account for: effects of and load history effects of temperatures effects of aging effects of heterogeneity effects of damage and failure (fatigue, fracture, etc.)
19 2. Elastic vs. Viscoelastic Response 2.1. Comparison of elastic and viscoelastic responses 2.2. Typical material models 2.3. Differences between and frequency domain based definitions 2.4. Differences between elastic and plastic response
20 2. Elastic vs. Viscoelastic Response 2.1. Comparison of Responses Elastic Viscoelastic Time, t = 0 s P P
21 2. Elastic vs. Viscoelastic Response 2.1. Comparison of Responses Elastic Viscoelastic Time, t = 10 s 0 s 10 s P P
22 2. Elastic vs. Viscoelastic Response 2.1. Comparison of Responses Elastic Viscoelastic Time, t = 100 s P 0 s 10 s 100 s P Under a constant prescribed load (stress), viscoelastic materials undergo creep deformation (strain)
23 2. Elastic vs. Viscoelastic Response 2.1. Comparison of Responses Load, P Excitation Load Deformation, δ Elastic Solids P Deformation, δ Deformation, δ Viscous Fluids Viscoelastic Response Deformation
24 2. Elastic vs. Viscoelastic Response 2.1. Comparison of Responses Deformation, δ Excitation Reaction, P Elastic Solids Deformation δ Reaction, P Viscous Fluids Viscoelastic Reaction, P Under a prescribed deformation (strain), viscoelastic materials undergo relaxation of reaction (stress) Response Reaction
25 2. Elastic vs. Viscoelastic Response 2.2. Material Models Constitutive behavior (or stress-strain relationship): Young s modulus for elastic solids Viscosity for viscous fluids Viscoelastic material constitutive behavior can be represented by: Creep compliance, D(t) strain = function of D(t) and stress Relaxation modulus, E(t) stress = function of E(t) and strain Various constitutive models are available for linear viscoelasticity: Spring-Dashpot Models (Prony series models) Mathematical Models (Power law is most common)
26 2. Elastic vs. Viscoelastic Response 2.2. Material Models Linear Spring Linear Dashpot (Elastic Solid) (Viscous Fluid) E λ E = Elastic Modulus ( lb / in 2 σ = E ε or N / m 2 ) λ = Coeff. of Viscosity ( Stokes or Poiseor N S σ = dε λ dt / m 2 )
27 2. Elastic vs. Viscoelastic Response 2.2. Material Models Basic Spring-Dashpot Models: Maxwell Model Voight-Kelvin Model Burger s Model 3-Parameter Solid Model 3-Parameter Liquid Model
28 2. Elastic vs. Viscoelastic Response 2.2. Material Models Response to Step Load: F Excitation Spring δ Dashpot δ Maxwell Response Model δ Voight-Kelvin Model δ
29 2. Elastic vs. Viscoelastic Response 2.2. Material Models Response to Step Load: Burger s F Excitation Model δ 3-Param. Solid Model δ Response 3-Param. Liquid Model δ
30 2. Elastic vs. Viscoelastic Response 2.2. Material Models Prony Series Models: Generalized Maxwell Model Generalized Voight-Kelvin Model (1) (1) (2) (2)
31 2. Elastic vs. Viscoelastic Response 2.2. Material Models 10 1 Behavior of Prony Series Stress 10 0 Time Creep Strain 10-1 P Initial Elastic Response, f(d 0 )
32 2. Elastic vs. Viscoelastic Response 2.2. Material Models Power Law Model: Creep compliance or relaxation modulus is expressed by Power Law, D( t) = D Where, D 0, D D t 1 m and m are determined experimentally D(t) D 1 t m D 0 Time
33 2. Elastic vs. Viscoelastic Response 2.3. Time versus Frequency So far our discussion was limited to step or ramp type excitations Load, P Under cyclic or harmonic loading conditions we use slightly different terminology to define material response Deformation, δ Elastic Solids P
34 2. Elastic vs. Viscoelastic Response 2.3. Time versus Frequency 1 cycle = 1 Hz 1 cycle = 2π rad 1 cycle = 360 Deg + Applied Load, P (Stress) - t σ Complex modulus E* = σ/ε Deformation (Strain) + t Phase angle (ϕ) related to t t ε Phase angle, ϕ -
35 2. Elastic vs. Viscoelastic Response 2.3. Time versus Frequency Load, P δ P Elastic Solids Phase angle, ϕ = 0º δ Phase angle, ϕ = 90º Viscous Fluids δ Viscoelastic Phase angle, 0º < ϕ < 90º
36 2. Elastic vs. Viscoelastic Response 2.3. Time versus Frequency Time lag (phase angle) Stress, Strain Stress Strain σ ο ε o Complex Modulus E σ o * = ε o Phase Angle φ =ω t σ sin (ω t) o ε sin (ω t φ) o + Time
37 2. Elastic vs. Viscoelastic Response 2.4. Elastic versus Plastic Plastic behavior is when material does not make full recovery of strain on unloading Non-linear elastic Linear elastic Non-linear inelastic
38 2. Elastic vs. Viscoelastic Response 2.4. Elastic versus Plastic For materials exhibiting plastic behavior, Total Strain = Recoverable Strain + Plastic Strain Stress Total Strain Strain Plastic Strain Recov. Strain
39 Mechanical Models for Asphalt Behavior and Performance Basics of Asphalt Modeling 1
40 Goals The objective of this webinar is to learn about 1.Challenges in characterization of asphalt materials and pavements 2.Elastic versus viscoelastic response of materials 3.Linear viscoelasticity and superposition principle 4.Typical tests and terminology
41 3. Linear viscoelasticity & superposition 3.1. Linear viscoelastic response 3.2. Superposition principle and its applications 3.3. Inter-conversion 3.4. Example: Resilient modulus using creep-recovery
42 3. Linear viscoelasticity & superposition 3.1. Linear viscoelastic response 3.2. Superposition principle and its applications 3.3. Inter-conversion 3.4. Example: Resilient modulus using creep-recovery
43 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response Linear response is easily understood for elastic or independent materials We are just dealing with stress strain and does not play a role Simply put, for a linear elastic solid stress is proportional to strain (within certain limits) stress 1 E However, for a linear viscoelastic solid or -dependent elastic, the dimension also becomes important strain
44 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response Let us first introduce the dimension for a linear elastic or independent material. σ Input σ 1 ε P ε=dσ 1 Response
45 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response Let us first introduce the dimension for a linear elastic or independent material. σ Input ασ 1 σ 1 αp ε Response ε=dασ 1 ε=dσ 1
46 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response What about a linear viscoelastic or dependent solid? σ Input σ 1 P ε Response ε t =D(t)σ 1 viscoelastic or dependent linear elastic or independent ε=dσ 1
47 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response What about a linear viscoelastic or dependent solid? σ Input ασ 1 σ 1 The response is scaled BUT only when there is no history! ε t =D(t)ασ 1 αp ε Response ε t =D(t)σ 1 ε=dασ 1 viscoelastic or dependent linear elastic or independent ε=dσ 1
48 3. Linear viscoelasticity & superposition 1. Linear viscoelastic response What happens when there is a load or deformation history? Can we not just scale and add the response every the load increases or decreases? σ Input ασ 1 σ 1 ε t =D(t)ασ 1 ε Response ε t =D(t)σ 1 ε=dασ 1 viscoelastic or dependent linear elastic or independent ε=dσ 1
49 3. Linear viscoelasticity & superposition 3.1. Linear viscoelastic response 3.2. Superposition principle and its applications 3.3. Inter-conversion 3.4. Example: Resilient modulus using creep-recovery
50 ε σ 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications As before, let us first examine what happens to a linear elastic solid when you add (or subtract) new loads (or deformations) σ 2 σ 1 σ 1 + σ 2 ε=dσ 1 ε=d(σ 1 + σ 2 ) x seconds
51 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications For a linear dependent or viscoelastic solid, we cannot just scale and add the strains σ 2 σ 2 σ σ σ 1 σ 1 + σ 2 σ 1 σ 1 + σ 2 ε ε=dσ 1 ε=d(σ 1 + σ 2 ) ε ε t =D(t)σ 1 ε t =D(t)(σ 1 +σ 2 ) x seconds x seconds
52 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications For a linear dependent or viscoelastic solid, we cannot just scale and add the strains σ σ 2 σ σ 1 + σ 2 σ 1 σ 1 + σ 2 σ 1 σ 2 ε t =D(t)σ 1 +D(t-x)σ 2 ε ε ε=dσ 1 ε=d(σ 1 + σ 2 ) x seconds ε t =D(t)σ 1 ε t =D(t)σ 2 x seconds This is only when t>x seconds
53 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications What about an arbitrary loading history? Recall ε t =D(t)σ 1 +D(t-x)σ 2 σ n σ n Simply put, the above idea is extended in the form of a summation of finite stresses: σ σ 4 σ 3 σ 2 σ 1 σ 3 σ 2 x 2 x 3 x 4 x n σ 1 A more common way to expressing the above is in its integral form:
54 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications What about an arbitrary loading history? σ σ n σ 4 σ 3 σ 2 σ 1 σ n σ 3 σ 2 x 2 x 3 x 4 x n σ 1 It is important to remember that arbitrary load or deformation histories are accumulated using this superposition integral (also known as convolution integral or Boltzmann s integral)
55 3. Linear viscoelasticity & superposition 3.2. Superposition principle and its applications What about an arbitrary loading history? σ ε ε = Integrating {D(t), σ (t)} σ = Integrating {E(t), ε (t)}
56 3. Linear viscoelasticity & superposition 3.1. Linear viscoelastic response 3.2. Superposition principle and its applications 3.3. Inter-conversion 3.4. Example: Resilient modulus using creep-recovery
57 3. Linear viscoelasticity & superposition 3.3. Inter-conversion Previously, we have seen that the material properties can be measured in domain (creep or relaxation) or frequency domain (complex modulus) These are properties of the material and hence it is mathematically possible to get one from the other ε σ ε = Integrating {D(t), σ (t)}
58 3. Linear viscoelasticity & superposition 3.3. Inter-conversion Previously, we have seen that the material properties can be measured in domain (creep or relaxation) or frequency domain (complex modulus) These are properties of the material and hence it is mathematically possible to get one from the other σ ε σ = Integrating {E(t), ε (t)}
59 3. Linear viscoelasticity & superposition 3.3. Inter-conversion A note about compliance and relaxation In the case of elastic materials the inter-conversion or interrelationship is straightforward What about -dependent materials? There are methods to solve such integrals, for now it is sufficient to know that we can obtain one from the other
60 3. Linear viscoelasticity & superposition 3.1. Linear viscoelastic response 3.2. Superposition principle and its applications 3.3. Inter-conversion 3.4. Example: Resilient modulus using creep-recovery
61 3. Linear viscoelasticity & superposition 3.4. Example: Resilient Modulus ε σ ε = Integrating {D(t), σ (t)}
62 Goals The objective of this webinar is to learn about 1.Challenges in characterization of asphalt materials and pavements 2.Elastic versus -dependent or viscoelastic response of materials 3.Linear viscoelasticity and superposition principle 4.Typical tests and terminology
63 4. Typical tests & terminology 4.1. Frequency sweep 4.2. Temperature sweep 4.3. Amplitude sweep 4.4. Time sweep
64 4. Typical tests & terminology 4.1. Frequency sweep Typically sinusoidal loading is used Frequency of loading is varied with Commonly used to determine the relationship between G* (or phase angle) and frequency and to determine creep compliance or relaxation Amplitude Time
65 4. Typical tests & terminology 4.2. Temperature sweep Also referred to as DMTA (Differential mechanical thermal analysis) Typically one stress amplitude is selected and temperature varies Commonly used with polymers to determine glass transition temperatures G δ γ δ T g Glass Transition Temperature
66 4. Typical tests & terminology 4.3. Amplitude sweep Typically sinusoidal loading is used Strain or stress amplitude is varied in linear or logarithmic scale Commonly used to determine limits for linear viscoelastic response Amplitude Time
67 4. Typical tests & terminology 4.4. Time sweep Typically sinusoidal loading is used A constant stress or strain amplitude is applied for several cycles Typically used to assess the fatigue damage evolution in materials; tests are typically carried out until specimen failure Amplitude Time
68 Goals The objective of this webinar is to learn about 1.Challenges in characterization of asphalt materials and pavements 2.Elastic versus -dependent or viscoelastic response of materials 3.Linear viscoelasticity and superposition principle 4.Typical tests and terminology
Lecture 7 Constitutive Behavior of Asphalt Concrete
Lecture 7 Constitutive Behavior of Asphalt Concrete What is a Constitutive Model? A constitutive model or constitutive equation is a relation between two physical quantities that is specific to a material
More informationMechanical Models for Asphalt Behavior and Performance
Mechanical Models for Asphalt Behavior and Performance Introduction and Review of Linear Viscoelastic Behaviors About the webinar series Past, current, and future plan for webinar series Introduction to
More informationCharacterizing Nonlinear Viscoelastic Response of Asphaltic Materials
Characterizing Nonlinear Viscoelastic Response of Asphaltic Materials University of Texas at Austin Amit Bhasin Arash May, Motamed 21 Computational models of asphalt composites are increasingly being used
More informationFlexible Pavement Design
Flexible Pavement Design The Mechanistic-Empirical Way Presented by: Keith D. Herbold, P.E. 1 Presentation Outline What s new in flexible design Example of new design Differences Capabilities Tests and
More informationTesting Elastomers and Plastics for Marc Material Models
Testing Elastomers and Plastics for Marc Material Models Presented by: Kurt Miller Axel Products, Inc. axelproducts.com We Measure Structural Properties Stress Strain Time-Temperature Test Combinations
More informationRheological Properties and Fatigue Resistance of Crumb Rubber Modified Bitumen
Rheological Properties and Fatigue Resistance of Crumb Rubber Modified Bitumen F. Khodary Department of Civil Engineering, Institute of traffic and transport, section of road and pavement engineering,
More informationBIOEN LECTURE 18: VISCOELASTIC MODELS
BIOEN 326 2013 LECTURE 18: VISCOELASTIC MODELS Definition of Viscoelasticity. Until now, we have looked at time-independent behaviors. This assumed that materials were purely elastic in the conditions
More information2002 Design Guide Preparing for Implementation
2002 Preparing for Implementation By Monte Symons 2003 NCUAPG Annual Meeting Excerpts from the 2002 Guide Implementation Package 2002 Presentation Overview Need for NCHRP 1-37A - Status Guide Basics Asphalt
More informationLinear viscoelastic behavior
Harvard-MIT Division of Health Sciences and Technology HST.523J: Cell-Matrix Mechanics Prof. Ioannis Yannas Linear viscoelastic behavior 1. The constitutive equation depends on load history. 2. Diagnostic
More informationVISCOELASTIC FE MODELING OF ASPHALT PAVEMENTS AND ITS APPLICATION TO U.S. 30 PERPETUAL PAVEMENT. A dissertation presented to.
VISCOELASTIC FE MODELING OF ASPHALT PAVEMENTS AND ITS APPLICATION TO U.S. 30 PERPETUAL PAVEMENT A dissertation presented to the faculty of the Russ College of Engineering and Technology of Ohio University
More informationEstimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep
Standard Method of Test for Estimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep AASHTO Designation: TP 101-14 American Association of State Highway and Transportation Officials
More informationCreep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete
Creep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete Eshan V. Dave Andrew F. Braham Prof. William G. Buttlar Prof. Glaucio H. Paulino CONCREEP8, Ise-Shima, Japan
More informationPhenomenological models for binder rutting and fatigue. University of Wisconsin Research Team
Phenomenological models for binder rutting and fatigue University of Wisconsin Research Team Outline of Talk The need for measuring damage behavior Current efforts, and evolution of ideas Gaps and what
More informationDeformation of Polymers. Version 2.1. Boban Tanovic, MATTER David Dunning, University of North London
Deformation of Polymers Version 2.1 Boban Tanovic, MATTER David Dunning, University of North London Assumed Pre-knowledge It is assumed that the user is familiar with the terms elasticity, stress, strain,
More informationF7. Characteristic behavior of solids
F7. Characteristic behavior of solids F7a: Deformation and failure phenomena: Elasticity, inelasticity, creep, fatigue. à Choice of constitutive model: Issues to be considered è Relevance? Physical effect
More informationAbvanced Lab Course. Dynamical-Mechanical Analysis (DMA) of Polymers
Abvanced Lab Course Dynamical-Mechanical Analysis (DMA) of Polymers M211 As od: 9.4.213 Aim: Determination of the mechanical properties of a typical polymer under alternating load in the elastic range
More informationEstimating Fatigue Resistance Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep
Standard Method of Test for Estimating Fatigue Resistance Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep AASHTO Designation: TP 2b xx (LAST)101-1214 American Association of State
More informationMATERIAL MODELS FOR CRUMB RUBBER AND TDA. California State University, Chico
MATERIAL MODELS FOR CRUMB RUBBER AND TDA California State University, Chico Waste Tire Products for CE Applications Whole Tires Tire Shreds (TDA) Crumb Rubber/Tire Buffings Whole Tires TIRE DERIVED AGGREGATE
More informationPrediction of Complex Shear Modulus and Fracture Properties of Asphalt Binders with Oxidative Aging
Prediction of Complex Shear Modulus and Fracture Properties of Asphalt Binders with Oxidative Aging By Haifang Wen, PhD, PE Colf Distinguished Professor Director of Washington Center for Asphalt Technology
More informationViscoelasticity, Creep and Oscillation Experiment. Basic Seminar Applied Rheology
Viscoelasticity, Creep and Oscillation Experiment Basic Seminar Applied Rheology Overview Repetition of some basic terms Viscoelastic behavior Experimental approach to viscoelasticity Creep- and recovery
More informationUniversity Graz / Austria Institut für Chemie Volker Ribitsch
University Graz / Austria Institut für Chemie Volker Ribitsch 1 Rheology Oscillatory experiments Dynamic experiments Deformation of materials under non-steady conditions in the linear viscoelastic range
More informationNonlinear oscillatory shear tests applied to bitumen: analysis and application of large amplitude oscillatory shear (LAOS)
Nonlinear oscillatory shear tests applied to bitumen: analysis and application of large amplitude oscillatory shear (LAOS) Alec Otto Cookman 1, a, Michael J. Farrar 1, Jean-Pascal Planche 1 1 Western Research
More informationDynamic Mechanical Analysis of Solid Polymers and Polymer Melts
Polymer Physics 2015 Matilda Larsson Dynamic Mechanical Analysis of Solid Polymers and Polymer Melts Polymer & Materials Chemistry Introduction Two common instruments for dynamic mechanical thermal analysis
More informationAdvances in performance evaluation of asphalt binders
Advances in performance evaluation of asphalt binders Hussain U Bahia Professor University of Wisconsin, USA March 25, Lisbon, Potugal s:, design performance a, LNEC, 25 March 2010 Road Outline >Performance
More informationInterconversion of Dynamic Modulus to Creep Compliance and Relaxation Modulus: Numerical Modeling and Laboratory Validation
Final Report September 2016 Interconversion of Dynamic Modulus to Creep Compliance and Relaxation Modulus: Numerical Modeling and Laboratory Validation SOLARIS Consortium, Tier 1 University Transportation
More informationElements of Polymer Structure and Viscoelasticity. David M. Parks Mechanics and Materials II February 18, 2004
Elements of Polymer Structure and Viscoelasticity David M. Parks Mechanics and Materials II 2.002 February 18, 2004 Outline Elements of polymer structure Linear vs. branched; Vinyl polymers and substitutions
More informationChapter 7. Highlights:
Chapter 7 Highlights: 1. Understand the basic concepts of engineering stress and strain, yield strength, tensile strength, Young's(elastic) modulus, ductility, toughness, resilience, true stress and true
More informationImpact of Healing. Self healing in bituminous materials. Lab. Field. log N ,845
Impact of Healing Self healing in bituminous materials N 18.3 C E* f 3.291 0,845 t 0? Lab. Field log N Healing Mechanism Step 1: Interfacial Wetting Step 2: Intrinsic healing d t, X dt a b = fn (healing
More informationThe Influence of Strain Amplitude, Temperature and Frequency on Complex Shear Moduli of Polymer Materials under Kinematic Harmonic Loading
Mechanics and Mechanical Engineering Vol. 21, No. 1 (2017) 157 170 c Lodz University of Technology The Influence of Strain Amplitude, Temperature and Frequency on Complex Shear Moduli of Polymer Materials
More informationARC Update - Binder Fatigue
Asphalt Binder Expert Task Group ARC Update - Binder Fatigue Carl Johnson and Hussain U. Bahia University of Wisconsin - Madison September 16, 2009 Binder Fatigue Update Background Where we left off at
More informationThe 2S2P1D: An Excellent Linear Viscoelastic Model
The 2S2P1D: An Excellent Linear Viscoelastic Model Md. Yusoff 1, N. I., Monieur, D. 2, Airey, G. D. 1 Abstract An experimental campaign has been carried out on five different unaged and five aged penetration
More informationTRANSPORTATION RESEARCH BOARD. Static and Seismic Design of Piles for Downdrag. Thursday, October 4, :00-3:30 PM ET
TRANSPORTATION RESEARCH BOARD Static and Seismic Design of Piles for Downdrag Thursday, October 4, 2018 2:00-3:30 PM ET The Transportation Research Board has met the standards and requirements of the Registered
More informationRole of Binders in Pavement Performance
Role of Binders in Pavement Performance Presented by H. Bahia Research conducted by The University of Wisconsin-Asphalt Group The Pavement Performance Prediction Symposium Western Research Institute, Laramie,
More information2008 SEAUPG CONFERENCE-BIRMINGHAM, ALABAMA
Introduction Overview M E E Design Inputs MEPDG Where are we now MEPDG Inputs, Outputs, and Sensitivity Southeast Asphalt User Producer Group Bill Vavrik 19 November 2008 2 Implementation Timeframe DARWin
More informationEshan V. Dave, Secretary of M&FGM2006 (Hawaii) Research Assistant and Ph.D. Candidate. Glaucio H. Paulino, Chairman of M&FGM2006 (Hawaii)
Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model I: Development, Implementation and Verification Eshan V. Dave, Secretary of M&FGM2006 (Hawaii)
More informationCreep. Creep behavior of viscoelastic polymeric materials
B1 Version: 2.2_EN Date: 15. March 2018. BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING Creep Creep behavior of viscoelastic polymeric
More informationDynamic Finite Element Modeling of Elastomers
Dynamic Finite Element Modeling of Elastomers Jörgen S. Bergström, Ph.D. Veryst Engineering, LLC, 47A Kearney Rd, Needham, MA 02494 Abstract: In many applications, elastomers are used as a load-carrying
More informationNCAT Test Track Prediction
NCAT Test Track Prediction % Cracking Measured 60 50 40 30 20 10 0 O FW AW C RW R 5 7 9 11 13 15 % Damage Predicted Stress Sweep Rutting (SSR) Test Y. Richard Kim Jimmy D. Clark Distinguished University
More informationDynamic Mechanical Analysis (DMA) of Polymers by Oscillatory Indentation
Dynamic Mechanical Analysis (DMA) of Polymers by Oscillatory Indentation By Jennifer Hay, Nanomechanics, Inc. Abstract This application note teaches the theory and practice of measuring the complex modulus
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING CAMBRIDGE, MASSACHUSETTS 02139
MASSACHUSES INSIUE OF ECHNOLOGY DEPARMEN OF MAERIALS SCIENCE AND ENGINEERING CAMBRIDGE, MASSACHUSES 02139 3.22 MECHANICAL PROPERIES OF MAERIALS PROBLEM SE 5 SOLUIONS 1. (Hertzber 6.2) If it takes 300 seconds
More informationPerformance Characteristics of Asphalt Mixtures Incorporating Treated Ground Tire Rubber Added During the Mixing Process
Innovative Research in Asphalt Pavements Performance Characteristics of Asphalt Mixtures Incorporating Treated Ground Tire Rubber Added During the Mixing Process Dr. Walaa S. Mogawer, PE, F.ASCE Director
More informationA.C. Pronk & A.A.A. Molenaar Road & Railway Engineering, Delft University of Technology, Delft, The Netherlands
The Modified Partial Healing Model used as a Prediction Tool for the Complex Stiffness Modulus Evolutions in Four Point Bending Fatigue Tests based on the Evolutions in Uni-Axial Push-Pull Tests. A.C.
More informationUnified Constitutive Model for Engineering- Pavement Materials and Computer Applications. University of Illinois 12 February 2009
Unified Constitutive Model for Engineering- Pavement Materials and Computer Applications Chandrakant S. Desai Kent Distinguished i Lecture University of Illinois 12 February 2009 Participation in Pavements.
More informationAnalysis of Non-Linear Dynamic Behaviours in Asphalt Concrete Pavements Under Temperature Variations
ENOC 2017, June 25 30, 2017, Budapest, Hungary Analysis of Non-Linear Dynamic Behaviours in Asphalt Concrete Pavements Under Temperature Variations Amal Abdelaziz *, Chun-Hsing Ho *, and Junyi Shan * *
More informationEngineering Solid Mechanics
}} Engineering Solid Mechanics 1 (2013) 1-8 Contents lists available at GrowingScience Engineering Solid Mechanics homepage: www.growingscience.com/esm Impact damage simulation in elastic and viscoelastic
More informationMATERIAL MECHANICS, SE2126 COMPUTER LAB 3 VISCOELASTICITY. k a. N t
MATERIAL MECHANICS, SE2126 COMPUTER LAB 3 VISCOELASTICITY N t i Gt () G0 1 i ( 1 e τ = α ) i= 1 k a k b τ PART A RELAXING PLASTIC PAPERCLIP Consider an ordinary paperclip made of plastic, as they more
More informationMATERIALS FOR CIVIL AND CONSTRUCTION ENGINEERS
MATERIALS FOR CIVIL AND CONSTRUCTION ENGINEERS 3 rd Edition Michael S. Mamlouk Arizona State University John P. Zaniewski West Virginia University Solution Manual FOREWORD This solution manual includes
More informationMulti-mode revisited
Multi-mode revisited Testing the application of shift factors S.J.M Hellenbrand 515217 MT 7.29 Coaches: Ir. L.C.A. van Breemen Dr. Ir. L.E. Govaert 2-7- 7 Contents Contents 1 Introduction 2 I Polymers
More informationAnalysis of Hot-Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests
Analysis of Hot-Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests by Samer W. Katicha Dissertation submitted to the Faculty of the
More informationMSE 383, Unit 3-3. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Dynamic Mechanical Behavior MSE 383, Unit 3-3 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Scope Why DMA & TTS? DMA Dynamic Mechanical Behavior (DMA) Superposition Principles
More informationA Unified Continuum Damage Mechanics Model for Predicting the Mechanical Response of Asphalt Mixtures and Pavements
International Journal of Roads and Airports (IJRA) ISSN 236-2595 [on-line] - http://ijra.univpm.it A Unified Continuum Damage Mechanics Model for Predicting the Mechanical Response of Asphalt Mixtures
More information单击此处编辑母版标题样式 Investigation into the Size effect on Four Point Bending Fatigue Tests
单击此处编辑母版标题样式 Investigation into the Size effect on Four Point Bending Fatigue Tests Ning Li Ph.D. Candidate Presented to: the 3rd 4PBB Conference Co-authors: Ir. A.C. Pronk Prof. Dr. ir. A.A.A. Molenaar
More informationTheoretical Seismology. Astrophysics and Cosmology and Earth and Environmental Physics. Anelasticity. Fabio ROMANELLI
Theoretical Seismology Astrophysics and Cosmology and Earth and Environmental Physics Anelasticity Fabio ROMANELLI Department of Mathematics & Geosciences University of Trieste romanel@units.it Intrinsic
More informationMechanistic Pavement Design
Seminar on Pavement Design System and Pavement Performance Models Reykjavik, 22. 23. March, 2007 Mechanistic Pavement Design A Road to Enhanced Understanding of Pavement Performance Sigurdur Erlingsson
More informationMechanical Properties of Polymers. Scope. MSE 383, Unit 3-1. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Mechanical Properties of Polymers Scope MSE 383, Unit 3-1 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Structure - mechanical properties relations Time-dependent mechanical
More informationTRANSPORTATION RESEARCH BOARD. TRB Webinar Program Direct Displacement Based Seismic Design of Bridges. Thursday, June 22, :00-3:30 PM ET
TRANSPORTATION RESEARCH BOARD TRB Webinar Program Direct Displacement Based Seismic Design of Bridges Thursday, June 22, 2017 2:00-3:30 PM ET The Transportation Research Board has met the standards and
More informationME 2570 MECHANICS OF MATERIALS
ME 2570 MECHANICS OF MATERIALS Chapter III. Mechanical Properties of Materials 1 Tension and Compression Test The strength of a material depends on its ability to sustain a load without undue deformation
More informationCookbook for Rheological Models Asphalt Binders
CAIT-UTC-062 Cookbook for Rheological Models Asphalt Binders FINAL REPORT May 2016 Submitted by: Offei A. Adarkwa PhD in Civil Engineering Nii Attoh-Okine Professor Pamela Cook Unidel Professor University
More informationRheology of Asphalt Binders and Implications for Performance
Rheology of Asphalt Binders and Implications for Performance November 10, 2009 Dr. David Anderson Consultant and Professor Emeritus Penn State University DA.SC@COMCAST.NET Dr. Geoffrey Rowe President Abatech
More informationMeso Mechanical Analysis of AC Mixture Response
ABSTRACT Meso Mechanical Analysis of AC Mixture Response Milliyon Woldekidan 1, Marinus Huurman 2, Elisa Vaccari 3, Marco Poot 4 (1 Delft University of Technology, Stevinweg 1, 26 GA Delft, The Netherlands,
More informationDEVELOPMENT AND EVALUATION OF AN HMA FRACTURE MECHANICS BASED MODEL TO PREDICT TOP-DOWN CRACKING IN HMA LAYERS
DEVELOPMENT AND EVALUATION OF AN HMA FRACTURE MECHANICS BASED MODEL TO PREDICT TOP-DOWN CRACKING IN HMA LAYERS By JIAN ZOU A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN
More informationConstitutive Model for High Density Polyethylene to Capture Strain Reversal
Constitutive Model for High Density Polyethylene to Capture Strain Reversal Abdul Ghafar Chehab 1 and Ian D. Moore 2 1 Research Assistant, GeoEngineering Centre at Queen s RMC, Queen s University, Kingston,
More informationABSTRACT. This dissertation presents a uniaxial viscoplastic constitutive model that is capable of
ABSTRACT YUN, TAEYOUNG. Development of a Viscoplastic Constitutive Model Using a Rate- Dependent Yield Criterion for HMA in Compression. (Under the direction of Dr. Y. Richard Kim). This dissertation presents
More informationThe Effect of Aging on Binder Properties of Porous Asphalt Concrete
The Effect of Aging on Binder Properties of Porous Asphalt Concrete Eyassu T. Hagos Raveling Supervisors: Prof. Dr. Ir. A.A.A. Molenaar Assoc. Prof. Ir. M.F.C. van de Ven Porous Asphalt layer March 27,
More informationAsphalt Mix Performance Testing on Field Project on MTO Hwy 10
Asphalt Mix Performance Testing on Field Project on MTO Hwy 10 2 nd International Conference on Warm Mix Asphalt October 11 13, 2011, St. Louis, Missouri Acknowledgements Presenter Paolo Visconti, Iterchimica
More informationAgricultural Science 1B Principles & Processes in Agriculture. Mike Wheatland
Agricultural Science 1B Principles & Processes in Agriculture Mike Wheatland (m.wheatland@physics.usyd.edu.au) Outline - Lectures weeks 9-12 Chapter 6: Balance in nature - description of energy balance
More informationDIGITAL SIMULATIVE TEST OF ASPHALT MIXTURES USING FINITE ELEMENT METHOD AND X-RAY TOMOGRAPHY IMAGES
DIGITAL SIMULATIVE TEST OF ASPHALT MIXTURES USING FINITE ELEMENT METHOD AND X-RAY TOMOGRAPHY IMAGES Wang, Yongping Dissertation submitted to the faculty of Virginia Polytechnic Institute and State University
More informationMechanistic-Empirical Pavement Design Guide Distress Models
Mechanistic-Empirical Pavement Design Guide Distress Models By: Mohamed El-Basyouny Arizona State University Pavement Performance Models Symposium Laramie - Wyoming June 23, 2006 Outline Analysis Methodology
More informationVisco-elastic Models of Asphalt Pavements. Ellis Cumberbatch, Mathematics Department Claremont Graduate School, Claremont, CA 91711, USA
ApORTACIONES l\iatei\l
More informationViscoelastic Mechanical Analysis for High Temperature Process of a Soda-Lime Glass Using COMSOL Multiphysics
Viscoelastic Mechanical Analysis for High Temperature Process of a Soda-Lime Glass Using COMSOL Multiphysics R. Carbone 1* 1 Dipartimento di Ingegneria dei Materiali e della Produzione sez. Tecnologie
More informationMeasurement Engineering Group, Paderborn University, Warburger Straße 100, Paderborn, Germany
Nadine Feldmann 1, Fabian Bause 1, Bernd Henning 1 1 Measurement Engineering Group, Paderborn University, Warburger Straße 100, 33098 Paderborn, Germany feldmann@emt.uni-paderborn.de Abstract The present
More informationComparison between the visco-elastic dampers And Magnetorheological dampers and study the Effect of temperature on the damping properties
Comparison between the visco-elastic dampers And Magnetorheological dampers and study the Effect of temperature on the damping properties A.Q. Bhatti National University of Sciences and Technology (NUST),
More informationDiscrete Element Modelling of Idealised Asphalt Mixture
School of Civil Engineering Discrete Element Modelling of Idealised Asphalt Mixture by York Wei Lee Thesis submitted to the University of Nottingham for the degree of Doctor of Philosophy June 2006 To
More informationMECHANISTIC-EMPIRICAL LOAD EQUIVALENCIES USING WEIGH IN MOTION
MECHANISTIC-EMPIRICAL LOAD EQUIVALENCIES USING WEIGH IN MOTION Prepared By: Curtis Berthelot Ph.D., P.Eng. Dept. of Civil Engineering University of Saskatchewan Tanya Loewen Dept. of Civil Engineering
More informationVECD (Visco-ElasticContinuum Damage): State-of-the-art technique to evaluate fatigue damage in asphalt pavements
VECD (Visco-ElasticContinuum Damage): tate-of-the-art technique to evaluate fatigue damage in asphalt pavements M. Emin Kutay, Ph.D., P.E. Assistant Professor Michigan tate University History of the Viscoelastic
More informationStress Sweep Rutting (SSR) Test: AMPT
Stress Sweep Rutting (SSR) Test: AMPT Amir Ghanbari Graduate Research Assistant Y. Richard Kim Jimmy D. Clark Distinguished University Professor Alumni Distinguished Graduate Professor B. Shane Underwood
More informationWilliam G. Buttlar Glaucio H. Paulino Harry H. Hilton Phillip B. Blankenship Hervé DiBenedetto. All colleagues and friends
Ph.D. Final Exam Asphalt Pavement Aging and Temperature Dependent Properties using a Functionally Graded Viscoelastic Model Eshan V. Dave June 5th 29 Department of Civil and Environmental Engineering University
More informationPavement Design Where are We? By Dr. Mofreh F. Saleh
Pavement Design Where are We? By Dr. Mofreh F. Saleh Pavement Design Where are We?? State-of-Practice State-of-the-Art Empirical Mechanistic- Empirical Mechanistic Actual Current Practice?? Inputs Structure
More informationAblaos Asphalt Binder Large Amplitude Oscillatory Shear
Michael J. Farrar mfarrar@uwyo.edu Jean-Pascal Planche Alec Otto Cookman Steve Salmans Ablaos Asphalt Binder Large Amplitude Oscillatory Shear Binder ETG Baton Rouge, LA Sept. 16, 2014 Outline Linear Viscoelasticity
More informationRheology step 1. Principles of Rheology and its Measurement techniques. Panta Rei. TRAINING. Viscosity, Elasticity and Viscoelasticity
Rheology step 1 Principles of Rheology and its Measurement techniques Viscosity, Elasticity and Viscoelasticity Fresh After 12 h Panta Rei. +46 709787805 www.reokonsa.com 1 (8) For whom: Rheology is the
More informationRheological And Dielectric Characterization of Thermosetting Polymers. Jeffrey Gotro, Ph.D.
Rheological And Dielectric Characterization of Thermosetting Polymers Outline Introduction Oscillatory parallel plate rheometry Dynamic dielectric measurements Simultaneous dynamic mechanical/dielectric
More informationOPTIMISING THE MECHANICAL CHARACTERISATION OF A RESILIENT INTERLAYER FOR THE USE IN TIMBER CON- STRUCTION
OPTIMISING THE MECHANICAL CHARACTERISATION OF A RESILIENT INTERLAYER FOR THE USE IN TIMBER CON- STRUCTION Luca Barbaresi, Federica Morandi, Juri Belcari, Andrea Zucchelli and Alice Speranza University
More informationRheology. October 2013
Rheology Georges Cailletaud Centre des Matériaux MINES ParisTech/CNRS October 2013 Georges Cailletaud Rheology 1/44 Contents 1 Mechanical tests Structures Representative material elements 2 Rheological
More informationModule-4. Mechanical Properties of Metals
Module-4 Mechanical Properties of Metals Contents ) Elastic deformation and Plastic deformation ) Interpretation of tensile stress-strain curves 3) Yielding under multi-axial stress, Yield criteria, Macroscopic
More informationAPPENDIX A PROGRAM FLOW CHARTS
APPENDIX A PROGRAM FLOW CHARTS LIST OF FIGURES Figure Page A-1 Structure of the MEPDG software... A-1 A-2 Relationship of the reflection cracking design program of this project to the MEPDG design software...
More informationMOOC QP Set 1 Principles of Vibration Control
Section I Section II Section III MOOC QP Set 1 Principles of Vibration Control (TOTAL = 100 marks : 0 questions x 1 mark/question = 0 marks : 0 questions x marks/question = 40 marks : 8 questions x 5 marks/question
More informationCHARACTERIZATION OF VISCOELASTIC AND FRACTURE PROPERTIES OF ASPHALTIC MATERIALS IN MULTIPLE LENGTH SCALES
University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Civil Engineering Theses, Dissertations, and Student Research Civil Engineering Spring 4-20-2012 CHARACTERIZATION OF VISCOELASTIC
More informationRheology III. Ideal materials Laboratory tests Power-law creep The strength of the lithosphere The role of micromechanical defects in power-law creep
Rheology III Ideal materials Laboratory tests Power-law creep The strength of the lithosphere The role of micromechanical defects in power-law creep Ideal materials fall into one of the following categories:
More informationMechanical properties of polymers: an overview. Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore
Mechanical properties of polymers: an overview Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore UGC-NRCM Summer School on Mechanical Property Characterization- June 2012 Overview of polymer
More informationPERFORMANCE BASED EVALUATION OF CRACKING IN ASPHALT CONCRETE USING VISCOELASTIC AND FRACTURE PROPERTIES
University of New Hampshire University of New Hampshire Scholars' Repository Doctoral Dissertations Student Scholarship Spring 2018 PERFORMANCE BASED EVALUATION OF CRACKING IN ASPHALT CONCRETE USING VISCOELASTIC
More informationPolymer Dynamics and Rheology
Polymer Dynamics and Rheology 1 Polymer Dynamics and Rheology Brownian motion Harmonic Oscillator Damped harmonic oscillator Elastic dumbbell model Boltzmann superposition principle Rubber elasticity and
More informationLinear Amplitude Sweep Test:
Binder Expert Task Group Meeting Baton Rouge, LA September16, 2014 Linear Amplitude Sweep Test: Binder Grading Specification and Field Validation Pouya Teymourpour Hussain Bahia University of Wisconsin-Madison
More informationDynamic Modulus of Asphalt Mixtures for Development of
JOURNAL PAPER TYPE Journal of Testing and Evaluation, Sept 2002 Vol XX, No. X Paper ID: Available online at: www.astm.org Published XXXX Lee, K. 1, Kim, H. 2, Kim, N. 3, Kim, Y 4 Dynamic Modulus of Asphalt
More informationUniversity Microfilms, Inc., Ann Arbor, Michigan
T his d issertation has been 63-6258 m icrofilm ed exactly as received PAGEN, C harles Anthony, 1934- AN ANALYSIS OF THE THERMORHEOLOGICAL RESPONSE OF BITUMINOUS CONCRETE. The Ohio State U n iversity,
More informationFundamentals of Polymer Rheology. Sarah Cotts TA Instruments Rubber Testing Seminar CUICAR, Greenville SC
Fundamentals of Polymer Rheology Sarah Cotts TA Instruments Rubber Testing Seminar CUICAR, Greenville SC Rheology: An Introduction Rheology: The study of stress-deformation relationships =Viscosity =Modulus
More informationIntroduction to Engineering Materials ENGR2000. Dr. Coates
Introduction to Engineering Materials ENGR2 Chapter 6: Mechanical Properties of Metals Dr. Coates 6.2 Concepts of Stress and Strain tension compression shear torsion Tension Tests The specimen is deformed
More informationAsphalt Pavement Response and Fatigue Performance Prediction Using. Warm Mix Asphalt
Asphalt Pavement Response and Fatigue Performance Prediction Using the VECD Approach ApplicationApplication to Warm Mix Asphalt Y. Richard Kim, Ph.D, P.E. North Carolina State University Presented at the
More informationGM Rowe and DA Anderson. Binder ETG Meeting, April 2014
GM Rowe and DA Anderson Binder ETG Meeting, April 2014 What is relaxation spectra Historical perspective What it means Other simplifications Field correlations Black space Discrete Model the asphalt by
More informationUSE OF A LINEAR VISCOELASTIC CONSTITUTIVE LAW TO MODEL THE TIME DEPENDENT BEHAVIOUR OF ORTHOTROPIC GLASSFIBRE REINFORCED PLASTIC
USE OF A LINEAR VISCOELASTIC CONSTITUTIVE LAW TO MODEL THE TIME DEPENDENT BEHAVIOUR OF ORTHOTROPIC GLASSFIBRE REINFORCED PLASTIC Roland. M. Hinterhoelzl 1, Guenther Schullerer 1, Kurt Moser 1 1 Institut
More informationSoftware Tools and Guide for Viscoelastic Creep Experiments
Software Tools and Guide for Viscoelastic Creep Experiments Jessica Wehner A thesis submitted to the faculty of the University of North Carolina at Chapel Hill in partial fulfillment of the requirements
More information