Related Document: IEC 6084-16 MKP 184 Dimensions in millimeters 40.0 ±.0 L 40.0 ±.0 Max. MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back tuning). Protection circuits in SMPS s. Snubber and electronic ballast circuits. Input and output filtering in SPS designs, storage, timing and integrating circuits. MARKING Manufacturer's logo/type/c-value/rated voltage/tolerance/ date of manufacture DIELECTRIC Polypropylene film ELECTRODES Vacuum deposited aluminum COATING Metal-foil-wrapped, insulated, epoxy resin sealed, flame retardant CONSTRUCTION Extended double-sided metallized polyester film, internal series connection (60 to 000 VDC), double-sided metallized polyester carrier film, (refer to general information) LEADS Tinned wire IEC TEST CLASSIFICATION //6, according to IEC 60068 OPERATING TEMPERATURE RANGE - C to + C RANGE 0pF to 4.µF Ø d D Ø d.0 0. < 16.0 0.8 16.0 D Max. FEATURES Product is completely lead (Pb)-free. Product is RoHS compliant. TOLERANCES ± 0% (M), ± % (K), ± % (J) RATED S (U R ): 160 VDC, 0 VDC, 400 VDC, 60 VDC, 0 VDC, 1600 VDC, 000 VDC PERMISSIBLE AC S (RMS) UP TO 60Hz VAC, 160 VAC, 0 VAC, 400 VAC, 600 VAC, 60 VAC, 00 VAC TEST (ELECTRODE/ELECTRODE) 1.6 x U R for s INSULATION RESISTANCE Measured at VDC after one minute For C 0.µF:,000 MΩ minimum value (,000 MΩ typical value) TIME CONSTANT Measured at VDC after one minute For C > 0.µF: 0,000 s minimum value (0,000 s typical value) TEMPERATURE COEFFICIENT -0 x -6 / C (typical value) DRIFT Up to + 40 C, ± 0.% for a period of two years DERATING FOR DC AND AC.CATEGORY U C At + 8 C: U C = U R At + C: U C = 0. U R SELF INDUCTANCE ~ 1 nh measured with 6mm long leads PULL TEST ON LEADS 0 N in direction of leads according to IEC 60068--1 BEND TEST ON LEADS bends through 90 C with half of the force used in pull test RELIABILITY Operational life > 00,000 h Failure rate < FIT (40 C and 0. x U R ) For further details, please refer to the general information available at www.vishay.com/?60. e RoHS COMPLIANT MAXIMUM PULSE RISE TIME CAPACITOR Maximum Pulse Rise Time d v /d t [V/µs] LENGTH (MM) 160 VDC 0 VDC 400 VDC 60 VDC 0 VDC 1600 VDC 000 VDC 1 900 1140 1840 40 60 9 40 9 60 0 0 800 800 600 4 0 40 400 14 000 680 400 44 140 80 980 180 1690 600 If the maximum pulse voltage is less than the rated voltage higher d v /d t values can be permitted. Document Number: 60 For technical questions contact; dc-film@vishay.com www.vishay.com Revision: 04-Jul-0 1
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 DISSIPATION FACTOR TAN δ MEASURED AT C µf µf < C µf C > µf 1kHz 0. x - 0. x - 0. x - khz 0.4 x - 0.4 x - khz 1. x - Maximum values Further C-values on request pcm = L +. RECOMMENDED PACKAGING 16 160 VDC/ VAC 0 VDC/160 VAC 40 400 VDC/0 VAC 6 60 VDC/0 VAC D L D L D L D L 0pF - pf - 1 00pF - 00pF - 400pF - 4 6800pF - 68 µf - 6.0.0.0 µf - 1 6. 8.0.0 0.0µF - 6.0. 9..0 0.0µF - 6.0.0.0.0 9.0 9.0 0.04µF - 4 6. 8.0 8.0.0. 9.0 0.068µF - 68..0.0 9.0.0 1. 9.0 µf - 4.0.0 8.0.0 1.0 1. 4.0 µf - 41 8.0.0 9..0.0 9.0 4.0 0.µF - 4 9..0 9.0 9.0 9.0 14. 44.0 0.µF - 4 9.0 9.0. 9.0 1. 9.0 1. 44.0 0.4µF - 44.0 9.0 9.0 4.0 44.0 µf - 468 9.0 4.0 1. 4.0.0 44.0 LETTER µf - 1. 4.0 1. 4.0 1. 44.0 1.µF - 1 1. 4.0 1. 44.0 1. 44.0.µF - 1. 44.0 18. 44.0 6.0 44.0.µF - 18. 44.0. 44.0 4.µF - 4.0 44.0 TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING EXAMPLES G AMMO MKP 184--1-G X R REEL 0 MKP 184--1-R X BULK for L > 1.mm MKP 184-4-1 X www.vishay.com For technical questions contact; dc-film@vishay.com Document Number: 60 Revision: 04-Jul-0
Related Document: IEC 6084-16 MKP 184 0 VDC/600VAC 1 1600 VDC/60 VAC 0 000 VDC/00 VAC D L D L D L 0pF - 6. 9.0 pf - 1 6. 9.0 00pF - 6. 9.0 00pF -.0 9.0 400pF - 4 8.0 9.0 6800pF - 68 9. 9.0 µf - 6. 9.0 8.0 9.0 1 9.0 µf - 1 8.0 9.0 9. 9.0 11. 4.0 0.0µF - 9.0 9.0 1 9.0 4.0 0.0µF - 1 9.0 11. 4.0 16.0 4.0 0.04µF - 4 1 4.0 1. 4.0 44.0 0.068µF - 68 4.0 16.0 4.0 18.0 44.0 µf - 4 1. 4.0 44.0 44.0 µf - 41 44.0 18. 44.0 0.µF - 4 18.0 44.0.0 44.0 0.µF - 4 0.4µF - 44 µf - 468 µf - 1.µF - 1.µF -.µf - 4.µF - 4 Further C-values on request pcm = L +. RECOMMENDED PACKAGING LETTER TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING EXAMPLES G AMMO MKP 184--1-G X R REEL 0 MKP 184--1-R X BULK for L > 1.mm MKP 184-4-1 X Document Number: 60 For technical questions contact; dc-film@vishay.com www.vishay.com Revision: 04-Jul-0
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 1 160 VDC 4 6 4. 0.0 0.04. 0.068 0. 0. 0.4. 1. 0 0 VDC.. 1. 0.0 0.4 0.04 0. 0. 4 6 0 400 VDC 4 6 0. 0. 1...0 0.04 0. 0 60 VDC 4 6 0. 0.0 0.068 0 0 VDC 4 6 0.0 0.04 0. 0 1600 VDC 4 6 0.04 0.0 0. www.vishay.com For technical questions contact; dc-film@vishay.com Document Number: 60 4 Revision: 04-Jul-0
Related Document: IEC 6084-16 MKP 184 0 000 VDC Capacitance in pf and µf 4 6 0 00 400 0.0 0.04 Z [Ω] 1 Z [Ω] 1 0 0-1 -1-4.µF.µF µf 0.4µF 0.µF µf 0.04µF 0.0µF µf - 4.µF.µF µf 0.4µF 0.µF µf 0.04µF 0.0µF µf - 0.0 0..0 0 Impedance versus Frequency Z = f (f) (Lead length 6.0mm) 160 VDC to 60 VDC f [MHz] - 0.0 0..0 0 Impedance versus Frequency Z = f (f) (Lead length 6.0mm) 0 VDC to 000 VDC f [MHz] Document Number: 60 For technical questions contact; dc-film@vishay.com www.vishay.com Revision: 04-Jul-0