GENERAL NOTES - ROOFING

0 //0 :: M......... 0........ NL N - MLN N LL V P W P W, N L VY N NN P N. NY MUU M PN LL U NN P N. N P ZU ML WLL NUN WN W. ML UP NNN ZU ML NUN N U. MMLY NY N WN LUN N WN. N LL NY WN QU "NNN MLN NVN" L UM P. L. L UM N (0) Y P MMNMN MLN NVN, N N M P Y P. L N UMN V. (-00--). WWW...U N LL MV MLN ML N M P N LY, N P M N N W PPLL LL,, N L QUMN. WN UM N PNLY ULN N UU MPNN N. NN N M MMNMN N WLL MNN Y WN N PL. WV, VN WN UU MY U Y WN MVL N LV PN P LV MLN W. ML N M MV LL MV ULLY N M N M, ML MN. L ULN MLN QUPMN N MV N ML N MP V L N UPPN WLL, N L MN. W N LUMN, WLL, N L, N LN N MN, N () LL P N LN LL M M U N N. NY M M LL PL N NL. L MPY NU QU Y LL ML UU NUN P. N U UNL W L LL LMML ML, MNN NL PL UPPN V UN LM- UN PN. MNN W UN N L 0. U LM UN PN. MNN QU VNLN UU PN. P W MLN UUL MN MM YMLLY, M LW. MPL ULN MLN PN N N L P UN LW N L. MV M PN ULN N NLL N (U, V) LVL. P UN NY LL,, W, PP, L, P V, VY U N NN N L (N N PPLL). L, NY, NN, L N P LL UL VN ULN(), UU ML. U, MVL NNMN ULY V WLL N P ULN, N PV MPY UL YP MLN N MNN NNUY V, ULN. NLU U N LM : LL,.V..., LPN, N. W UPN NY ULY V UNVL NY WN() VNY-W () U MNMUM P UPN. N MPLY W L,, N LL QUMN. P MLN, MPL L PMN NN N UM M N QU NMN M " MMN N NVNMNL QULY" (Q) QUMN. MPLN MLN LL U LL LVL PLUM L ( ZNL / VL U), N LN V NW W UU NUN UMN. M..P. WN NL MLN N N NUN P N MPVMN, PPN, N LNPN MN M M N U. P WLL N/ LN N MN W UL VN NU N M U UL MLN. QU MPLY W V, MPY PN, U WL, N, LN, NP, W QU Y U VN UN N. MV MPY N PN NLY W Z N LN. NL N - N LVN. L VY MNN P N MLLW U PP W -UL N/ N NN.. PV PL LMN N LL P U N W, UNP, PL, N,. UNL W N. N LM LL V PY N P N PL.. P WLL UN UN, N N/ MLLW V WLL N UL N WLL.. L LL PN L W N N (,, LUV, U,.). N N L M LL ML MNN P UL.. LL LV N N N LL UL, UNL W N.. N N LM PV P,, N, N L P QU MPL NLLN.. W, NLUN N, LL V LL N W W N N. VY YN QUMN W WN/ P NLLN.. W LPN, N/ LL UL MUN LW UN, PV MM LN (MN. -0..). VY W P NLLN. PV U-U QU NY VNLL N, N W. 0. Z QUPMN UN Y WN. N WN UN M W NW MLLW N W NLL NU PP P N.. U NL W WNV PL, MP-P W N PPL L U PLY L W. LL W N N UNL N P W.. LL NL N N W N W MLMN UNL N W.. PV NL N WN N P.. N WNW N YP P MNN N YP M. LL LLW ML M, N WNW PN L Y, UNL W N.. LL YPUM LN PN L Y, UNL W N. P N N LVN. M LN MY V MULPL L.. N UL N LN ML NN N NMN.. W WLL LL U PN, PN P- UNL W N. N LVN. M WLL MY V MULPL L.. W UU UL P, PN LN, LM L P-. PN LL P L UUL & M. L & M..P. YM L P-.. L LL P W M..P. YM PN WLL, L, LN, ML, N N. 0. PV /" PLYW, PN P-, V P N L YP N LL WLL N M M.. Z & LN & L.. 0. & 0. QU MUNN P... WL VY W M NU... MPLN N N, N LL VY LL NN W QUMN... UN UML VW N NLLN. N. N - L LN PLN 0 NL N N N VLP LYU LL MP YM N V NLL P VW. UM N PLN PPVL P N, N N/ NLLN NY YM. N LVN N/ N L U. L LL PNN UU LN WLL ML. LL NU VN LN NL, NLL V LN N/ W NY. LL P VW M (UU, UW, NU,.) LL V PN N (UNL W N). L L(). LL YPUM U LL P, L N PN. PN L L Y. VY L N N PPLN W P PNN. N LN N L PNL W N WN P NLLN. LVN N N V N L MMLY LW. M N WU N LV N L = 0-0. N UL ML NN WN N N LVN. LL LN WN N UL P LN PUP NLY. YP LL Y MP WN. UL QUNY L WN W, N LL NM N WN LL U PN. LN NN M P, N LL P QUNY N LL L U. VY LN WN-PV LN MUN L P N LL M NL N - N. N UPPLMNL PLN, L P N, PN N LL VNN. N, NLLN, NUN, WMNP N ML LL MPLY W M NN QUMN WN N PN, L N PPLL ULN W LL MNMN N QUMN. M L V N M M NN N N N N LL VW N N NL NY PNY N L N N N QUMN.. MNNL LUM N W LN LL LN, N, N P Y UU UN NUN. LUM N LN LL MNLLY N Y MN L W; NLN N PL. N MULPL LY W LN LL M NNUU LN LUM N L N N LN, P U N N,.. PP N WLL VN PN LL PP W VL LP (N L N P MNMUM) W N U WY N P N W WLL, N, UNL PLLY N W.. N PNN MN N N W LUM W LN LL NL L LVNZ UNL PLLY N W.. LL P QUPMN U, N N N,. LL NL W. L LL UL UP W P NULN.. NY PLYW LL NLL N N W WN PN MN PLYW N (P).. LL ML W LL MPLY W L N UL ML MNUL PUL Y ML N NNN N' NNL N (MN).. N-PL M-UP ML,, PN, PP P, U, WNPU, PNN N,. LL N, NU N PPV P ULLY UN ML W N N. PPV M-UP MY NP N NL W.. LL P N U U LN, UNLN, U V,. LL NL L W N NPN W. N LL PV N N W QUMN L V Y P MNUU QUMN P P NN. 0. ML N,, PN LL U Y NNUU L MPLYN W QUMN NNL N N' N (N). N LL NNUU L N L N N N N, UNL PLLY LLWL Y N. L N LL M MN ML (LN) N ML (PN,,.) W LL N N P ML W VN UP N V PL. P ML LL MM.. LL ML LL P M LUM N LN Y N ML NY WPN MMN QU PV MPL PN. NY WPN MMN LL PV LL N PN V ULL PN N PN. NY WPN MMN LL PV NL ULLY V N P W LN. NU NY WPN MMN MPL N L W N MLY UN PU UV Y N NL NLLN.. N NL ML U Y L LL V PL LL N N. W N N N QU, LL NU W MULPL PPMLY QUL, PL VN WN NNUU L. MULPL PL ML LL V NY L- WPN MMN ML L NL M M P PV MPL W MLY.. ML N, LN,. LL UPP Y W LN ML M N N NULN PV U N L MUNN NN. NY LN L N W N (NMNL) LL PL M LN MLY PV ULL P LN MN. W LN LL Z U W N P ML LN LN MNMUM N N N L N.. LL PNN LL MM Y U PNN, PP NLU, P-,. ULLY MPL W N MLY.. LL ML MPNN N, NN, MNN,. LL NU NL P ML W N L NN N L N N N N N W N ULLY L, P P-N ML.. NY LN U LL MPL W N ML, PM N PPL P MNUU' WN PN N L M M MNUU' ULL N L ( L Y ) ML W PPL.. U Z LL LUL Y N N N ULN N MN N/. N LL MPL U Z LULN NM QU Z N Z LL U M VNN Z QU. U LL NLL W QU LP PV PV N WNPU. U PNN N LL QULLY P LN N PN U NVL N Y. U LL NLL W P M /" Y N N LVNZ L P N M N N N N LL V NL M /" Y N N LVNZ L N WPP W MN P-N ML ( U) M P N P N M N N N.. U LL QUPP W WNPU PPP Z, MN Y N UN MN QUMN, NVL N Y, N L N V M N U LP N. LL U LL V L N WNPU, NLLY L ULN N U L W WLL N N LW UN N. LL WNPU LL Z QULLY N VNN Z QU.. WNPU LL U W MN P-N ML P P N M N V N N VLLY. MNMUM, WNPU LL V P PN W WNPU N WLL, M WNPU LN. WNPU NN UN LL P W VY U ML P N N PV W N PL L. 0. WNPU LL L N N NY PMY ULN PN.. P M M,, LN,. UL NUN V. N U MPL W U. QU PN MMN LL PV NY UQUN W MPL N (MNL, LL, PLUMN,.). LL N' PNLY N N PV NY PN U, N N W N MNUU' QUMN, UU UN P.. U, PNN,. LL NU L. NY NN W P M N U N LU L NU M L, LL N' PN UM UUN VW N PPVL Y W N NL M NU Y WN. W P L NU, LL ZNL N VL LN LL N N W LL VNN UN N NZN. QUPMN U LL N MNMUM WLV N V PLN N U.. MUN P QUPMN NN WN UNLN. MNL QUPMN U LL V W-P V N UNLN N N MNL QUPMN LN.. PP N NU LL UPP Y PL PP N W MP N LVNZ L MPNN. PN LL N MNUU N, U LL N N N N M NN LL N/N N N. W, PL, M, L UN LL N PL. N LN PP, NU,. PV LU NUN MNMZ NUM PP UPP. NY PPN NU NN M LL N L N " V N PLN UNN ZNL UN LN P. LL PPN NU LL LP WY M PNN PV W P LP.. WLWY PN P LL PV UN ULL PM NY MZ PW P QUPMN, P N WY, L N P VL, LL NN N NY PN N NY YP.. PV WNY N N LL PN (, WY,.) NL N - L PLN. N UMN, NLUN WN, PN, N,. LV N MPLMNY N V QUL UY N PY. LU VY N M N UMN, M PLLY MNN N PN, U N WN N WN M WN N WN U N PLLY MNN N PN LL PV Y W P N WN N WN. NN N UMN MPL, LL NLUV, N PV N NLLN MPL N VY P.. N LL ULLY VW WN, PN, N N NN P NNN NY NUN V N LL L VY LL N NN P NY NUN VY N NY, N WN, NY PN.. N LL MV LU ML N M P N LY. P LL M N N W PPLL LL,, L N N QUMN.. N LL MNN L P UN N P N UU ULN N N Y N ULN P. N LL MNN NUN NN PUL --WY N LLW V, MU, N VL,. M LVN. N LL LN PUL --WY Y WN NL N N WN.. N LL N N UPN U PV PPY P LLW UMN Y MN, N U MN,. N N P WN PMN M PPY WN.. NN WN N PN PV W N W ULN. N LL VW LL L LN NN N Y N NN N NUN N, WN N ULL Y QUY L. UL N PN L, LL NY P N. NY VN M NL NN UL U NN LN.. ULN LL NU N ULL MPLN W LL PPLL, NN N ULN WLL WN N PN. NY N N WN NZ Y N LL U NN LN.. N LL PNL U PLMN ULN N N VY LL MNN N N NN. PN WN WN N UL NN LL U NN N P MMNMN W. WN LL N PNL N W U LU NL N MLZ ML W N NN.. N LL PV LL PM N NPN NY PP UN W N N W PPLL N VNN UY. 0. PN N UN N WNW M, WN WLL N UNN, WN WLL N, WN WLL PNL, WLL N PNN N NY ULN NVLP PNN LL L, UL N/ W-PP LM N MU PNN. U NLY P, MNUU PPV ML N Y MNUU.. VLY L LL ML ML PVN N Y LLY N U MMN Y PV PU MNUU UPPL, QU.. PPLY MN LL ML N ML W PPP M, LN, LN, PNN NL,. N N WN QU MPL N PP NLLN P Y N ULN P.. PV LL MMN LN LL N WN ML ML PV MPL N VP N ULN NVLP YM.. LL MN L W W N WN N WN, WLL M N PLLY MNN N PN, U VULY NY PP MPLN W P NZ NUY N, LL N NNL N N P N NLU W W W P VN N PPL, N N NL MPNN LL LLW PMN. (MN L W MY NLU, U N LM : PVN NULN N MLL V, P,., MPPN MMN LN L N L N ULN MPNN, W LN, N,. QU MPL W,.). N L WN; LL MNN LL V PN V L N L V N N W W LL. N MNN VN PN UN, N LL NY LN N MMNN W W. LL MNN MNY U UNL N W. L PLN MNN N LN LUMN, U UNL N W. NLN WN Y.L. LN.. UUL N MP WN NL N N NUN. LL P L (...) N P M LVN N V W UUL WN. NY MMLY NY MNN LVN NL ULN N NN N N LN.. N LL VY Z N LN LL MNL N LL QUPMN P N, WLL PW, W N N QUMN U QUPMN W QUPMN MNUU. VN MNN QUMN UL U NN LN.. PV LN N WLL N LN QU U LL QUPMN,, NL, W,. ULLY N U LN P MPLN ULN MLY.. N LL ULLY VW LL LN V W, WLL PNL, M,, WLL PN, PLY QUPMN,. N N NY LL, MMUNN, UL, WLL MUN VUL N, M,. P U N V NL. 0. U, LN U,., N N L LN PLN LN N NN. MP NN N U NMN. LN U W N ULL Z LN PNL LL L N N LN PNL UNL PLLY WN W.. N LL P LL N MN UU NUN P. LNP WN NL N N NUN. N MV LL V N YM MV MNMUM -0 LW N UNL W N.. N WN LL N L N NN. N VN PNY WN N L N WN (WLL N, L,.), N L LL VN NUN. N PNN W MP WN. LL PNN LL L M MN N/ N N MNMUM L QUMN. NY NY PNY VW N LN P NUN.. LL P W L N V N L LP N (N N W N ) UNL N W. N N LN W MP WN P U-N.. LL L N MPL, MNUU PPV LN N N W MNUU' NLLN NUN N MMNN.. LL W LN N ULN NVLP WLL NY MN W LL -N- W. his drawing is the property ofhis drawing N Y M, N.. P N. VN: 0 N V, PU, 0 office:.. fax:.. YM, : 0//0 NL N NUM opyright ykema rchitects, nc. N - Port venue acility ddition 0.0. outh Port venue, orpus hristi, 0 0 0

0" MN 0' - " M > " igure 0. able 0. Parking paces L PN N L 0 00 0 0 00 QU MN. NUM L P L PN N L QU MN. NUM L P 0 00 0 00 0 00 0 000 000 N V PN L 0, PLU 00, N, V 000 amp & sides shall have detectable warnings and shall have a light reflective value that significantly contrasts with the adjoining pedestrian routes. tandard urb amp /" x /" W at " o.c. tool joints (typical) Location of typical parking access aisle urb amp Parallel to urb : Max lope 0" MN W MP LP MMUM steeper than :0, but not steeper than : " LP LL N : L " MN. ront approach, pull side 0" MN. x " MN. ront approach, push side hinge approach, pull side latch approach, pull side N PP WN (a) N: x = in if door has both a closer and a latch y y = " MN. y = " MN. " MN. y = " MN. " MN. N PP WNN (b) N: x = in minimum if y = 0 in; x = in minimum if y = in N: y = in minimum if door has both a closer and a latch N: y = in minimum if door has a closer N: y = in minimum if door has a closer L PP - WNN (c) N: all doors in alcoves or recesses shall comply with the clearance for front approaches, per 0... igure 0... N 0 - U MP. urb ramps shall comply with 0. - 0., 0.0. Maximum slopes of adjoining gutters, road surface immediately adjacent to the curb ramp, or accessible route shall not exceed :0. N 0. - LNN. Landings shall be provided at the tops of curb ramps. the landing clear length shall be " minimum. he landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing. (ig. 0.) N 0. - LN. urb ramps and the flared sides of curb rams shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles. urb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides. N 0. - NL U MP. f diagonal curb ramps have returned curbs or other well-defined edges, such edges shall be parallel to the direction of pedestrian flow. he bottom of diagonal curb ramps shall have " minimum clear space. f diagonal curb ramps are provided at marked crossings, the " clear space shall be within the markings. iagonal curb ramps with flared sides shall have at least a " long segment of straight curb located on each side of the curb ramp and within the marked crossing. N.. - LN. ny raised islands in crossings shall be cut through level with the street or curb ramps at both sides and a level area at least " long by " wide min. between the curb ramps in the part of the island intersected by the crossings. ach min. " x " area shall be oriented so that the " min. length is in the direction of the running slope of the curb ramp it serves. N 0 - MP (ee table 0. for existing conditions). amp runs shall have a slope not steeper than :. n assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not have to comply with 0. ross ramp shall not be steeper than :.. he clear width of the ramp run and the clear width between handrails where handrails are provided shall be " min.. he rise for any ramp shall be 0" maximum. he least possible slope shall be used for any ramp.. Level landings required at top and bottom of each run, with the following features:. Minimum Width: qual to width of ramp. Length: Minimum 0" clear. t change of direction landing shall be 0" x 0" min.. Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 0.. and 0.. shall be permitted to overlap the required landing area. N 0. - NL. andrails are required at all ramps with > " rise.. eight: "-" above ramp surface. he clear space between the handrail and the wall shall be /" minimum. N 0. - PN. amps and landings with drop offs in excess of /" shall have curbs, walls, railings, or projecting surfaces that prevent slipping off the ramp.. curb or barrier shall be provided that prevents the passage of a " diameter sphere, where any portion of the sphere is within " of the finish floor or ground surface.. he extended floor or ground surface of the ramp run or landing shall extend " minimum beyond the inside face of a handrail complying with 0. (see igure 0..) N 0 - LV. levators shall comply with M.. hey shall be passenger elevators as classified by M. levator operation shall be automatic. N 0. - LV LNN QUMN. all buttons shall be raised or flush and located within one of the reach ranges specified in 0, measured to the centerline of the highest operable point.. all buttons shall be /" minimum in the smallest dimension.. clear floor space complying with 0 shall be provided at the controls.. he call button that designates the up direction shall be located above the call button that designates the down direction.. all buttons shall have visible signals to indicate when each call is registered and when each call is answered.. eypads shall be in a standard telephone keypad arrangement.. Visible and audible signals shall be provided at each hoistway entrance to indicate which car is answering a call and the car's direction of travel. Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons.. Visible signal features shall be centered " minimum above the finish floor or ground. he visible signal elements shall be /" min. measured along the vertical centerline of the element. ignals shall be visible from the floor area adjacent to the hall call button.. udible signals shall sound once for the up direction and twice for the down direction, or shall have verbal annunciators that indicate the direction of elevator car travel. udible signals shall have a frequency of 00z max. Verbal annunciators shall have a frequency of 00 z min - 000 Z max.. loor designation shall be provided on both jambs of elevator hoistway entrances. loor designations shall be provided in both tactile characters and braille. actile characters shall be " high minimum. tactile star shall be provided on both jambs at the main entry level. N 0. - LV QUMN. levator doors shall be horizontal sliding type. ar gates are prohibited.. levator doors shall be provided with a reopening device that shall stop and open a door and hoistway door automatically if the door becomes obstructed by an object or person.. he device shall be activated by sensing an obstruction passing through the opening at " nominal and " nominal above the finish floor.. he device shall not require physical contact to be activated, although contact is permitted to occur before the door reverses. oor reopening devices shall remain effective for 0 seconds minimum.. levator doors shall remain fully open in response to a car call for seconds minimum. N 0 - PLM L. Platform lifts shall comply with M. ( edition or 00 edition). Platform lifts shall not be attendant-operated and shall provide unassisted entry and exit from lift.. he clearance between the platform sill and the edge of any runway landing shall be " maximum.. Platform lifts shall have low-energy power-operated doors or gates complying w/ 0.. oors shall remain open for 0 seconds min. nd doors and gates shall provide a clear width " min. ide doors and gates shall provide a clear " width min. N: QU VN M..L.. U N LU N LV N 0 - L U. ccessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than :0, doorways, ramps, curb ramps excluding the flared sides, elevators, and platform lifts. N 0 - WLN U. ll surfaces shall comply with 0. hanges in level shall comply with 0.. he running slope shall not be steeper than :0. he cross slope of the walking surfaces shall not be steeper than :.. he clear width of walking surfaces shall be " minimum.. he clear width shall be permitted to be reduced to " minimum for a length of " maximum provided that reduced width segments are separated by segments that are " long minimum and " wide minimum.. Where the accessible route makes a 0 turn around an element less than " wide, the clear width shall be " minimum approaching the turn, " minimum at the turn and " minimum leaving the turn.. Where the accessible route makes a 0 turn around an element less than " wide and the clear width at the end of the turn is 0" minimum, the clear width may be " approaching and leaving the turn.. n accessible route with a clear width less than 0" shall provide passing spaces at intervals of 00' maximum. Passing spaces shall either be 0"x0" or comply with 0.. where the base and arms of the -shaped space extend " minimum beyond the intersection. N 0 -, WY, N. oorways shall provide a clear opening of " minimum, with the door open 0. (ig. 0..). lear opening shall be measured between the face of the door and opposite stop.. penings more than " in depth shall provide a clear opening of " minimum.. here shall be no projections into the required clear opening width lower than " above the finish floor or ground. Projections into the clear opening width between "-0" shall not exceed ". N 0.. - N W. andles, pulls, latches, locks, and other operating devices shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. ardware required for accessible door passage shall be mounted "-" above finished floor or ground. N 0... - L N L. f a door has a closer, then the sweep period of the closer shall be adjusted so that from an open position of 0, the door will take at least seconds to move the door from the latch. N 0.. - N PNN. he maximum force for pushing or pulling open a door shall be as follows:. ire doors shall have the minimum opening force allowable by the appropriate administrative authority.. ther doors a. xterior hinged doors: no requirement. b. nterior hinged doors:.0 lb. c. liding or folding doors:.0 lb. hese forces do not apply to the force required to retract latch bolts or disengage other devices that may hold the door in a closed position. N 0.. - VN L. oors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located " maximum above the floor. P : L U P : ULN L P : PN QUMN P : PPLN N MNN N 0. - P. ll areas of newly designed and newly constructed buildings and facilities an altered portions of existing buildings and facilities shall comply with these requirements. N 0 - N ULN N L. ach addition to an existing building or facility shall comply with the requirements for new construction. ach addition that affects or could effect the usability of or access to an area containing a primary function shall comply with 0.. Where existing elements, spaces, or common use areas are altered, each altered element, space, or common use area shall comply with the applicable requirements of hapter.. n alteration that decreases the accessibility of a building or facility below the requirements for new construction at the time of the alteration is prohibited.. n alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction.. lterations that affect the usability or access to an area containing a primary function shall be made so as to ensure usage by individuals with disabilities. N 0 - PUN. Within areas of accessible elements, accessible routes, and in accessible room and spaces shall comply with 0.. Within areas of sports activity, protruding objects on circulation paths shall not be required to comply with 0.. Within play areas, protruding objects on circulation paths shall not be required to comply with 0 provided that ground level accessible routes provide vertical clearance in compliance with 00.. N 0 - PL P. perable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply w/0.. perable parts intended for use only by service or maintenance personnel shall not be required to comply with 0.. lectrical or communication receptacles serving a dedicated use shall not be required to comply with 0. N 0 - L U. t least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building or facility entrance they serve.. t least one accessible route shall connect accessible buildings, accessible facilities, accessible elements, and accessible spaces that are on the same site.. t least one accessible route shall connect each story and mezzanine in multi-story buildings and facilities.. n restaurants and cafeterias, an accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas.. Where a circulation path directly connects a performance area to an assembly area, an accessible route shall directly connect the assembly seating area with the performance area. n accessible route shall be provided from performance areas to ancillary areas or facilities used by performers. N 0 - L MN. Means of egress shall comply with section 00.. of the nternational uilding ode (000 edition and 00 upplement) or section 00 of the nternational uilding ode (00 edition.). tandby power shall be provided for platform lifts permitted by section 00... of the nternational uilding ode (000 edition and 00 supplement) or section 00. of the nternational uilding ode (00 edition) to serve as a part of an accessible means of egress. N 0 - PN P. Parking paces shall comply with 0 and shall be provided in accordance with able 0. except required by 0.., 0.., and 0... Where more than one parking facility is provided on a site, the number of accessible spaces provided on the site shall be calculated according to the number of spaces required for each parking facility. " MN hinge approach, push side latch approach, push side N 0 - NVNN. ll dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum points.. Unless specifically stated otherwise, figures are provided for informational purposes only. N 0.. - VN PN P. or every six or fraction of six parking spaces required by 0. to comply with 0, at least one shall be a van parking space complying with 0. N 0. - LN. Parking spaces complying with 0 that serve a particular building or facility shall be located on the shortest possible accessible route from parking lot to an entrance. Where parking serves more than one accessible entrance, parking spaces complying with 0 shall be dispersed and located at the shortest accessible route to the accessible entrances. N 0 - PN LN ZN N U P. Passenger loading zones, except those required to comply with 0.. and 0.., shall provide at least one passenger loading zone complying with 0 in every continuous 00 linear feet (0m) of loading zone space, or fraction thereof.. n bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply with 0. N 0 - WY. nterior and exterior stairs that are part of a means of egress shall comply with 0. lthough handrails on stairs that are not part of a means of egress, tate or local building codes may require handrails or guards. N - NN UNN. No fewer than two drinking fountains shall be provided.. More than the minimum number of drinking fountains specified in. are provided, 0 percent of the total number of drinking fountains provided shall comply with 0. through 0., and 0 percent of the total number of drinking fountains provided shall comply with 0. N - N, N, N N. itchens and kitchenettes shall comply with 0.. Where sinks are provided, at least percent, but no fewer than one, of each type provided in each accessible room or space shall comply with 0. N - L L N N L. Where toilet facilities and bathing facilities are provided, they shall comply with. oilet facilities and bathing facilities shall be provided on a story connected by an accessible route to an accessible entrance.. oilet restrooms and bathing rooms shall comply with 0.. Where multiple single user toilet rooms are clustered at a single location, no more than 0% of the single user toilet rooms for each use at each cluster shall be required to comply with 0.. Unisex toilet rooms and unisex bathing rooms shall contain not more than one lavatory, and two water closets without urinals or one water closet and one urinal. Unisex bathing rooms contain one shower or one shower and one bathtub, one lavatory, and one water closet. oors to unisex restrooms and bathing rooms shall have privacy latches. NUM 0 0 00 QU MN. NUM WL P NUM QU MN. NUM WL P 0 00 0 000 00 N V, plus for each 0, or fraction thereof, between 0 through 000 N - N, N, N L M. Where dressing rooms, fitting rooms, or locker rooms are provided, at least %, but no fewer than one, of each type of use in each cluster provided shall comply with 0.. Where coat hooks or shelves are provided in dressing fitting or locker rooms w/o individual compartments, at least one of each type shall comply with 0.. Where coat hooks or shelves are provided in individual compartments at least one of each type shall be provided in accordance with. N - ML N LN-M L. n licensed medical care facilities and licensed long-term care facilities where the period of stay exceeds twenty-four hours, patient or resident sleeping rooms shall be provided in accordance with. oilet rooms part of critical or intensive care patient sleeping rooms shall not be required to comply with 0., plus for each 00, or fraction thereof, over 000 N 0 - L UN U. loor and ground surfaces shall be stable, firm, and slip resistant.. arpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad. arpet or carpet tile shall have a level loop, textured loop, level cut pile, or level cut/uncut pile texture. Pile height shall be /" maximum. xposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge.. penings in floor or ground surfaces shall not allow passage of a sphere more than /" diameter except as allowed in 0.., 0..., 0., 0... and 0.0. longated openings shall be placed so that the long dimension is perpendicular to the dominant direction of travel. Protruding objects shall not reduce the clear width required for accessible routes. N 0 - N. efer to "ge ased dimensional information" table for children's reach ranges. N 0. - W. Where a forward reach is unobstructed, the high forward reach shall be " maximum and the low forward reach shall be " minimum above the finish floor or ground. (ig. 0..). Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction. he high forward reach shall be " maximum where the reach depth is 0" maximum. Where the reach depth exceeds 0", the high forward reach shall be " maximum and the reach depth shall be " maximum. (ig. 0..) N 0. -. Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be " maximum and the low side reach shall be " minimum above the finish floor or ground. (ig. 0..). n obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 0" maximum.. Where a clear floor or ground space allows a parallel approach to an element and the high side reach is over an obstruction, the height of the obstruction shall be " maximum and the depth of the obstruction shall be " maximum. he high side reach shall be " maximum for a reach depth of 0" maximum. Where the reach depth exceeds 0", the high side reach shall be " max. for a reach depth of " max. (ig. 0..). he top of washing machines and clothes dryers shall be permitted to be " maximum above the finish floor. N 0 - PL P. clear floor space complying with 0 shall be provided.. perable parts shall be placed within one or more of the reach ranges specified in 0.. perable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. he force required to activate operable parts shall be pounds maximum. igure 0.. igure 0.. " MN " M 0' - 0" M 0" M " M 0"-" M " M N 0 - N N LN. Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 0. dditional space shall not be prohibited beneath an element but shall not be considered as part of the clear floor or ground space or turning space. N 0. - LN. pace under an element between the finish floor or ground and " above the finish floor or ground shall be considered toe clearance.. oe clearance shall extend " maximum under an element. Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend " minimum under the element.. pace extending greater than " beyond the available knee clearance at " above the finish floor or ground shall not be considered toe clearance.. oe learance shall be 0" wide minimum. N 0. - N LN. pace under an element "-" above the finish floor shall be considered knee clearance.. nee clearance shall extend " maximum under an element at " above the finish floor.. Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be " deep min. at " above the finish floor or ground, and " deep min. at " above finish floor or ground.. etween "-" above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of " in depth for each " in height.. nee clearance shall be 0" wide minimum. N 0 - PUN. bjects projecting from walls with leading edges more than " and not more than 0" above the finish floor shall protrude no more than " horizontally into the circulation path.. ree-standing objects mounted on posts or pylons shall overhang circulation paths " max when located "-0" above the finish floor or ground. Where a sign or other obstruction is mounted between posts or pylons and the clear distance between the posts or pylons is greater than ", the lowest edge of such sign or obstruction shall be "-0" above the finish floor.. Vertical clearance shall be 0" high minimum. uardrails or other barriers shall be provided where the vertical clearance is less than 0" high. he leading edge of such guardrail or barrier shall be located " maximum above the finish floor. " MN 0" MN " MN x > " 0" MN x > " igure 0. igure 0.. igure 0.. 0" MN " MN N 0 - L L UN P. he clear floor or ground space shall be 0" minimum by " minimum.. loor of ground surfaces of a clear floor or ground space shall comply with 0. hanges in level are not permitted. lopes steeper than : are not permitted.. he clear floor or ground space shall be 0" minimum by " minimum. (ig. 0.). Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearances complying with 0.. Unless otherwise specified, clear floor or ground space shall be positioned for either forward or parallel approach to an element. (ig. 0.). ne full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space.. Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with below:. lcoves shall be " wide minimum where the depth exceeds " for forward approach (ig...). lcoves shall be 0" wide minimum where the depth exceeds " for parallel approach (ig. 0..) " MN " MN 0" MN 0" MN " MN " MN " MN igure 0.. igure 0. ign or obstruction able.. Number of Wheelchair paces in ssembly reas -shaped turning space igure 0.. (c) folding door " MN lear width at doorways N 0. - MNUVN LN. ront approach pull side - 0" min. width & " min. beside strike edge. ront approach push side - " min. width & 0" beside strike edge. (" @ strike if door has both a closer and a latch) (ig. 0... (a)). inge side approach pull side - 0" min. width, " min. beside strike edge; or " min. width, " min. beside strike edge. inge side approach push side - " min. width and " min. beside hinge edge (" min. width if door has both a closer and a latch) (ig. 0... (b)). Latch side approach pull side - " min. width and " min. beside strike edge (" min. width if door has a closer); Latch side approach push side - " min. width and " min. beside strike edge (" min. width if door has a closer) (ig. 0... (c)) N 0.. - L WY. Maximum threshold height: /", shall comply with 0 and 0. " MN " MN " MN " MN stop or latch approach pocket or hinge approach igure 0... steeper than :, but not steeper than :0 " L 0. Maximum ramp slope & rise for xisting onditions igure 0.. " MN " MN " MN slope slop e at least as wide as curb ramp flared sides, :0 max slope igure 0. N - NN LN L N U M. ransient lodging facilities shall provide guest rooms in accordance with. Places of lodging and housing at a place of education shall comply with the provisions applicable to transient lodging, including, but not limited to, the requirements for transient lodging guest rooms in sections and 0.. ntrances, doors, and doorways providing user passage into and within the guest rooms that are not required to provide mobility features complying with 0. shall comply with 0.... n guest rooms having more than beds, % minimum of the beds shall have clear floor space complying with 0... N -. Where storage is provided, at least one of each type shall comply with.. Where lockers are provided, at least %, but no fewer than one of each type, shall comply with. N - NN U N W U. Where dining surfaces are provided for the consumption of food or drink, at least % of the seating spaces and standing spaces at the dining surfaces shall comply with 0. n addition, where work surfaces are provided for use by other than employees, at least % shall comply with 0. N - L N V. Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with and 0.. Where counters are provided, at least one of each type of sales counter and service counter shall comply with 0.. Where counters are dispersed throughout the facility, counters complying with 0. shall also be dispersed.. Queues and waiting lines servicing counters or check-out aisles required to comply with 0. or 0. shall comply with 0. N - P, VNN MN, N MN, ML. Where provided, at least one of each type of depository, vending machine, change machine, and fuel dispenser shall comply with 0.. Where mail boxes are provided in an interior location, at least %, but no fewer than one of each type shall comply with 0. N - WNW. Where glazed openings are provided in accessible rooms or spaces for operation by occupants, at least one must opening shall comply with 0. ach glazed opening required by an administrative authority to be operable shall comply with 0. N 0 - W-WY MMUNN YM. Where a two-way communication system is provided to gain admittance to a building or facility or to be restricted areas within a building or facility, the system shall comply with 0. N 0 - PLY. Where ground level play components are provided, at least one of each type shall be on an accessible route and shall comply with 00... When elevated play components are provided, at least 0% shall be on an accessible route and shall comply with 00. N - WMMN PL, WN PL, N P. t least two accessible means of entry shall be provided for swimming pools.. t least one accessible means for entry for wading pools and spas. N - N L W N PN. Where shooting facilities with firing positions are designed and constructed at a site, at least %, but no fewer than one of each type of firing position shall comply with 00. P : PN QUMN (NNU) lear floor or ground space Position of clear floor or ground space Maneuvering clearance in an alcove, forward approach Maneuvering clearance in an alcove, parallel approach Limits of protruding objects Unobstructed forward/side reach bstructed high forward reach Maneuvering clearances at manual swinging doors and gates Maneuvering clearances at doorways without doors, sliding doors, gates, and folding doors xtended floor or ground surface edge protection Landings at the top of curb ramps orward approach Parallel approach x > " LLWN N L PV NMN N QUMN L LY. QUMN MN MNMUM QUMN N L N. PUP N LP V NLLN ML N NUN P WUL LM LY. P N LM N NVUL WN N P UL MLZ MLV W LY N () N MN W L LY ULN () NL NMN N QUMN. P UMN MY N Y NN LLWN: : P. LNN & ULN P.. UN, (00) 0-0 (00) - www.license.state.tx.us : UW LY N UN NL N N N V.. P, U 000 UN, 0 LN: (00) - : () 0- () 0-0 : () 0- N VN NMN N PLN N M MNMUM QUMN N, N NMN LL PN LN P NUN P W. LMNN UL UNM L LY N () n accordance with accessibility requirements, the following standards shall be included when bidding on projects involving renovation of or new facilities for public accommodation or commercial facilities. ny items not conforming to these or any other standards, codes, or ordinances shall be brought to the attention of the project architect for his interpretation. n the event the information listed in this document conflicts with any portion of the work described in the ontract ocuments, the contractor shall notify the architect, in writing, of his need for a solution to resolve the conflict. he mounting heights indicated are for items that require accessibility by disabled individuals. Where two or more items are grouped in one area (mirrors, sinks, toilets, drinking fountains, urinals, shelves, telephones, etc.) not all items in the area have to be mounted at handicap height. ontractor to coordinate these installation heights with other materials for neat, trimmed out and finished appearance. tems for disabled individual use shall be mounted at height indicated for age level as noted. LN MNN PP. U VL PMNN. /" M N N NN WL & MP (LP, PN, NL NN, N N).. " M N " M > 0"-" M igure 0.. bstructed high side reach " M N " M " MN " MN " MN igure 0.. oors in series and gates in series (c ) (b) (a) " MN N - V LNN YM. n each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided.. Where all seats in an assembly area are served by an introduction loop assistive learning system, the minimum number of receivers required by table. to be hearing-aid compatible shall not be required to be provided. N 0 - UM LL MN N MN. Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 0. Where bins are provided for envelopes, waste paper, or other purposes, at least one of each shall comply with. N - MLY. ssembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with and 0.. Wheelchair spaces complying with 0. shall be provided in accordance with table.... Wheelchair spaces shall be an integral part of the seating plan.. Wheelchair spaces shall provide lines of sight complying with 0.. n providing lines of sight, wheelchair spaces shall be dispersed. Wheelchair spaces shall provide spectators with choices of seating locations or viewing angles equal to or better than seating locations and viewing angles of other spectators.. tleast % of the total number of aisle seats provided shall comply with 0. and shall be the aisle seats located closest to the accessible routes. P : PN QUMN (NNU) P : L U (NNU) N - WN MN N L Y. Where three or fewer washing machines are provided, at least one shall comply with. Where more than three washing machines are provided, at least two shall comply with.. Where three or fewer clothes dryers are provided, at least one shall comply with.where more than three clothes dryers are provided, at least two shall comply with. N - LM YM. larms in public use areas and common use areas shall comply with 0.. Where employee work areas have audible alarm coverage, the wiring system shall be designed so that the visible alarms complying with 0 can be integrated into the alarm system. N - N. igns shall comply with 0. uilding directories, menus, seat and row designations in assembly areas, occupant names, building addresses, and company names and logos shall not be required to comply w/.. igns required by section 00... of the nternational uilding ode (000 edition) or section 00.. of the nternational uilding ode (00 edition) to provide instructions in areas of refuge shall comply with 0.. irectional signs required by section 00... of the nternational uilding ode (000 edition) or section 0. of the nternational uilding ode (00 edition) to provide directions to accessible means of egress shall comply with 0.. Where not all entrances comply with 0, entrances complying with 0 shall be identified by the nternational ymbol of ccessibility complying with 0... irectional signs complying with 0. that indicate the location of the nearest entrance complying with 0 shall be provided at entrances that do not comply with 0. N - LPN. Where public telephone are provided, wheelchair accessible telephones complying with 0. shall be provided. N 0 - UNN P. he turning space shall be a space 0" diameter minimum. he space shall be permitted toinclude knee and toe clearance complying with 0.. lopes steeper than : are not permitted.. oors shall be permitted to swing into turning spaces.. he -shaped turning space shall be a -shaped space within a 0" square minimum with arms and base " wide minimum. ach arm of the shall be clear of obstructions " minimum in each direction and the base shall be clear of obstructions " minimum. he space shall be permitted to include knee and toe clearance complying with 0 only at the end of either the baseor one arm. (ig. 0..) /" M. /" - /" N 0 - N N LVL. hanges in level of /" high maximum shall be permitted to be vertical. (ig. 0). hanges in level between /"-/" maximum shall be beveled at a slope not steeper than : (ig. 0). hanges in level greater than /" high shall be ramped and comply with 0 or 0 igure 0 (a) hinged door " MN 0.00 (b) sliding door " MN " MN front approach N. YM,. office:.. fax:.. Y M, N. 0 N V, PU, 0 his drawing is the property ofhis drawing opyright ykema rchitects, nc. P N. VN: //0 :: M outh Port venue, orpus hristi, : 0//0 N - Port venue acility ddition 0. 0 P 0 0

P : PL M, P, N LMN N 0. - WL P. he floor or ground surface of wheelchair spaces shall comply with 0. hanges in level are not permitted.. single wheelchair space shall be " wide minimum.. Where a wheelchair space can be entered from the front or rear, the wheelchair space shall be " deep minimum. Where a wheelchair space can be entered only from the side, the wheelchair space shall be 0" deep minimum.. Wheelchair spaces shall adjoin accessible routes. ccessible routes shall not overlap wheelchair spaces.. Lines of sight to the screen, performance area, or playing field for spectators shall comply with 0. (have line of sight over heads of spectators, dependent on spectators position) N 0. - MPNN. ompanion seats should be positioned to have shoulder alignment with adjacent wheelchair spaces. he shoulder alignment point shall be measured " from the front of the wheelchair space. he floor surface should be the same for the wheelchair space and companion space.. ompanion seats should be equal in size, quality, comfort, and the amenities of immediate seating. N 0. - L. ach designated aisle seat shall be identified by a sign or marker. Where armrests are provided on other seating in the immediate area, folding or retractable armrests must be provided on the aisle side of the seat. N 0 - N, N, N L M. urning space complying with 0 shall be provided within the room.. oors shall not swing into the room unless a clear floor or ground space complying with 0. is provided beyond the arc of the swing.. bench that is " long minimum x 0"-" deep set at a height of "-" shall be provided within the room.. oat hooks shall be located within reach ranges specified in 0. helves shall be 0"-" maximum above the finish floor or ground. N 0 - N N N. n a pass through kitchens where counters or appliances are on opposing sides, there must be a 0" minimum clearance between opposing sides and an entrance from each side.. n a U-shaped kitchen enclosed on continuous sides, clearance between all opposing sides must be 0" minimum.. itchen work surface shall be " above finish floor or ground. PU " - " M PU *'-0" M. igure 0. * N PPLL N UP " - " " MN. " M. " MN. " MN. " MN. NN L L P 0" MN. " MN. lear loor pace at Water losets " MN "' M " - " " - " " - " " - " ' - 0" ' - 0" oilet partition as specified oilet paper dispenser W/ rab bar N oilet partition as specified LN MNNL 0" L igure 0. igure 0.. Locate flush controls on transfer side L 0" MN. " MN. " M. " M. " MN. WLL MUN W.. " MN, LN WLL MUN W.. " MN. L MUN W.. LN LN " MN. L PP NLY, PP " MN. igure 0... igure 0.. " MN. - " M. " M. " MN. " MN. 0" MN. " MN. PP NLY, PP " MN. igure 0. 0" MN. " MN. /" MN " MN. L N N LV > " P N 0 - NN UNN. rinking fountains shall comply with 0 (protruding objects) and 0.. Units shall have a clear floor or ground space complying with 0 positioned for a forward approach and centered on the unit. nee and toe clearances must comply with 0. perable parts shall comply with 0. (ig. 0.) N 0. - PU (N U 0. L UN). ccessible spouts shall be a maximum " above the finish floor or ground. N 0. - PU LN (N U 0.). he spout shall be located " min. from the vertical support and " max. from the front edge of the unit, including bumpers.. he spout shall provide a flow of water at least " high and shall be located " maximum from the front of the unit.. Where spouts are located less than " from the front of the unit, the water stream shall be 0 degrees maximum. Where the spout is located between "-" maximum from the front of the unit, the angle of the water stream shall be degrees max. N 0. - NN UNN NN PN. pout outlets of drinking fountains for standing persons shall be " min. & " max. above the finish floor or ground. (ig. 0.) N 0 - W L N L MPMN. he water closet shall be positioned with a wall or partition to the rear and to one side. he centerline of the water closet shall be " minimum and " maximum from the side wall or partition, except in an ambulatory accessible toilet compartment where the centerline of the water closet may be " minimum and " maximum from the side wall or partition. Water closets shall be arranged for a left-hand or right-hand approach. (. 0.., 0..) N 0. - LN. learances around water closets and in toilet compartments shall comply with igure 0.. N 0.. - VLP. he required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space and clearances required at other fixtures, and the turning space. No other fixtures or obstructions shall be located within the required water closet clearance. N 0. - (N U 0.). he seat height of a water closet above finish floor shall be "-" maximum measured to the top of seat.. eats shall not be sprung to return to a lifted position N 0. - (N U 0., 0..). rab bars shall comply with 0 and be provided on the side wall closest to the water closet and on the rear wall..rab bars shall not be required in a toilet room for a single use occupant accessed only through a private office and not for common or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 0.. or water closets not located in toilet stalls, the following grab bars shall be provided, "-" above the finish floor". ide wall: " long minimum, located " maximum from back wall.. ear wall: " long minimum and extend from the centerline of the water closet " minimum on one side and " minimum on the other side. efer to 0 grab bars for size and structural elements. N 0. - LU NL (N U 0..). lush controls shall be hand operated or automatic. and operated flush controls shall comply with 0. lush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 0... N 0. - PN (N U 0.). oilet paper dispensers shall comply with 0. and shall be " minimum and " maximum in front of the water closet measured to the centerline of the dispenser. he outlet of the dispenser shall be " minimum and " maximum above the finish floor and shall not be located behind grab bars. ispensers that control delivery or do not permit continuous paper flow shall not be used. N 0. - L MPMN. Wheelchair accessible toilet compartments shall meet the requirements of 0.. and 0.. ompartments containing more than one plumbing fixture shall comply with 0. mbulatory accessible compartments shall comply with 0.. and 0... N 0.. - WL L MPMN. Wheelchair accessible compartments shall comply with 0... Wheelchair accessible compartments shall be 0" wide minimum measured perpendicular to the side wall, and " deep minimum for wall hung water closets and " deep minimum for floor mounted water closets measured perpendicular to the rear wall. Wheelchair accessible compartments for children's use shall be 0" wide minimum measured perpendicular to the wall and " deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall. LN N MNMUM QUMN LY. L M N LVY L MUNN. N 0 - W MPMN. hower stalls shall be " x " clear inside dimension at transfer type shower compartments and have a " minimum wide by " minimum long clearance measured from the control wall. oll-in type shower compartments shall be 0" minimum wide by 0" minimum long and shall have a 0" min wide x 0" min long entry on the face of the shower compartment. lternate roll-in shower type compartments shall be " minimum wide and 0" minimum deep clear inside dimensions with a " wide minimum entry provided at one end of the long side of the compartment. L " MN P : UL-N LMN P : MMUNN LMN N U igure 0.. " MN " MN L " MN " MN - " M L N 0... - (N U 0..., 0..). oilet compartments doors, including door hardware, shall comply with 0 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be " minimum. oors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be " maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be " maximum from the front partition. he door shall be self-closing. door pull complying with 0.. shall be placed on both sides of the door near the latch. oilet compartment doors shall not swing into the minimum required compartment area.. ompartments shall be arranged for left-hand or right-hand approach to the water closet. N 0... - LN. he front partition and at least one side partition shall provide a toe clearance of " minimum above finish floor and " deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. ompartments for children's use shall provide " minimum toe clearance above finish floor. N 0.. - MULY L MPMN. mbulatory accessible compartments shall comply with figure 0... mbulatory accessible compartments shall have a depth of 0" minimum and a width of "-" maximum.. rab bars in ambulatory accessible compartments shall comply with 0. side-wall grab bar that is " long minimum, located " max. from the rear wall and extending " min. from the rear wall shall be located on both sides of compartment.. oat hooks shall be located within one of the reach ranges specified in 0. helves shall be located 0"-" maximum above the finish floor. N 0 - UNL. Urinals shall be stall-type or wall-hung with the rim " maximum above the finish floor or ground. Urinals shall be /" deep minimum measured from the outer face of the urinal rim to the back side of the fixture. (ig. 0.). clear floor space complying with 0 (0" min. wide by " min. deep) positioned for forward approach shall be provided. " M " MN. N 0 - LV N N. clear floor space complying with 0 (0" min. wide by " min. deep) positioned for a forward approach, and knee and toe clearances complying with 0 shall be provided.. oap and towel dispensers must also be located within the reach ranges specified in 0. Locate soap and towel dispensers so they are easy to use by a person at the accessible lavatory.. Lavatories and sinks shall be installed with the front of the higher rim or counter surface " maximum above the finish floor or ground.. ontrols for faucets shall comply with 0. and-operated metering faucets shall remain for 0 seconds minimum.. Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact. here shall be no sharp or abrasive surfaces under lavatories and sinks. " M WLL-UN YP LL YP N 0 - U. learance in front of bathtubs shall extend the length of the bathtub and shall be 0 inches wide minimum. lavatory complying with 0 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend " minimum beyond the wall at the head end of the bathtub.. permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. eats shall comply with 0.. rab bars for bathtubs shall comply with 0 and shall be provided in accordance with figures 0.. N 0 -. rab bars with circular cross sections shall have an outside diameter of /" minimum and " maximum. rab bars with non-circular cross sections shall have a cross-section dimension of " maximum and a perimeter dimension of " minimum and." maximum.. he space between the wall and grab bar shall be /". he space between the grab bar and projecting objects below shall be /" minimum. he space between the grab bar and projecting objects above shall be " minimum.. rab bars shall be installed in a horizontal position, " minimum and " maximum above the finish floor measured to the top of the gripping surface. efer to chart for children accessible heights for exceptions.. llowable stresses shall not be exceeded for materials used when a horizontal or vertical force of 0 pounds is applied at any point of the grab bar or any of its components. N 0. - U. eat shall be able to stand vertical and horizontal forces of 0 pounds and shall have the following features:. hall be "-" above finish floor. emovable seats shall be "-" deep and capable of secure placement.. Permanent seats shall be " deep minimum & extend from the back wall to or beyond the outer edge of bathtub. N 0. - W. eats shall be L-shaped with the rear edge /" max. from the wall and "-" max.imum from the seat wall. he rear edge of the "L" portion shall be /" max. from the wall and the front edge shall be "-" from the wall. he end of the "L" shall be "-" from the main seat wall. eats shall have be able to stand vertical and horizontal forces of 0 lbs.. hall be "-" above finish floor. Where a seat is provided in a roll in type shower it must be the fold-up type. N - WN MN N L Y. op loading machines shall have the door to the laundry compartment located " maximum above the finish floor. ront loading machines shall have the bottom of the opening to the laundry compartment located "-" above the finish floor. back seat wall clear floor space W LL L grab bar x " "-" "-" "-" M /" M "-" M MPMN NY N WN " /" M W L W NL L W L control area N 0.. - N YP W MPMN. n transfer type compartments, grab bars shall be provided across the control wall and back wall to a point " from the control wall.. folding or non-folding seat shall be provided in transfer type shower compartments.. ontrols, faucets, and shower spray units shall comply with 0. N 0. - L. hresholds in roll-in type shower compartments shall be /" high maximum in accordance with 0. n transfer type shower compartments, thresholds /" high shall be beveled, rounded, or vertical. "-" M N 0 - L N N M. urning space complying with 0 shall be provided within the room. (0" diameter or -shaped space per 0..). equired clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap.. oor swings shall not swing into the clear floor space or clearance required for any fixture. oors can swing into the required turning space. N 0. - M. Mirrors located above lavatories or countertops shall be installed so the bottom edge of the reflecting surface is 0" maximum above the finish floor or ground. Mirrors not installed above lavatories or countertops shall be " maximum above the finish floor or ground. N 0. - N LV. oat hooks shall be located within the reach ranges specified in 0. helves shall be located 0"-" above the finish floor. N 0 - NN U N W U. clear floor space complying with 0 positioned for a forward approach shall be provided. nee and toe clearance must comply with 0.. ops of dining surfaces and work surfaces shall be "-" maximum above the finish floor or ground. N 0. - NN U N W U LN' U.. clear floor space complying with 0 positioned for a forward approach shall be provided. nee and toe clearance must comply with 0, except the knee clearance shall be " minimum above the finish floor or ground.. ops of dining surfaces and work surfaces shall be "-0" maximum above the finish floor or ground. N 0 - N. lear floor or ground space complying with 0 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench.. enches shall have seats " minimum long and 0"-" maximum deep.. ench shall provide back support or be affixed to a wall.. op of bench seat shall be "-" maximum above the finish floor or ground.. llowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 0 pounds is applied at any point on the seat or its components. N 0 - L N V UN. Parallel pproach - portion of the counter surface that is " long minimum and " high maximum shall be provided. clear floor space complying with 0 shall be positioned for a parallel or approach adjacent to the " high minimum length of the counter.. orward pproach - portion of the counter surface that is 0" long minimum and " high maximum shall be provided. nee and toe spaces complying with 0 shall be provided under the counter. clear floor space complying with 0 shall be positioned for a parallel or approach adjacent to the " high minimum length of the counter.. he accessible portion of the countertop shall extend the same depth as the sales/service counter. N 0 - LM YM. ire alarm systems shall have permanently installed audible and Visual alarms complying with NP ( or 00 addition) except that the maximum allowable sound level of audible notification appliances complying with section -.. of NP ( addition) shall have a sound level no more than 0d at the maximum hearing distance from the audible audiences. N 0 - N. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual, and one with tactile characters, shall be provided.. haracters shall be uppercase and raised /" minimum above their background.. haracters shall be sans serif. haracters shall not be italic, oblique, script, highly decorative, or of any other unusual form. haracters shall be selected from fonts where the width of the uppercase letter "" is -0 percent of the height of the uppercase letter ".". haracter height measured vertically from the baseline of the character shall be /"-" maximum based on the letter ".". raille shall be contracted (rade ) and shall comply with table 0... raille shall be located below the entire text.. actile characters on signs shall be located " minimum above the finish floor measured from the baseline of the lowest character and 0" maximum above finish floor measured from the baseline of the highest tactile character. N 0.. - LN. Where a tactile sign is provided at a door, the sign shall be located alongside the latch side. Where a tactile sign is provided at double doors with two active leafs, the sign shall be placed on the inactive leaf. f the double door has two active leafs, the tactile sign shall be placed to the right of the right hand door. Where there is no wall space at the latch side of the door or the right side of the double doors, signs shall be located on the adjacent wall. igns containing tactile letters shall be located so that a minimum clear space of "x," centered on the tactile letters is provided, beyond the arc of any door swing between the closed position and degrees open position. N 0. - VUL. haracters and their background shall have a non-glare finish. haracters shall contrast with their background with either light characters on a dark background or vice versa.. haracters shall be uppercase or lowercase or a combination of both.. haracters shall be conventional in form. haracters shall not be italic, oblique, script, highly decorative,or of any other unusual form. haracters shall be selected from fonts where the width of the uppercase letter "" is -0% of the height of the uppercase letter ".". haracter height shall comply with table 0.. Visual haracter eight. Visual characters shall be 0" maximum above the finish floor or ground. N 0. - PM. Pictograms shall have a field height of " minimum. haracters and braille shall not be located in the pictogram field.. Pictograms and their field shall have a non-glare finish. Pictograms shall contrast with their background with either light characters on a dark background or vice versa. igure 0... nternational ymbol of ccessibility Letters and numbers shall be raised /", upper case, sans serif or simple serif type and shall be accompanied with grade braille, raised characters shall be at least /" high, but no higher than ". Light switch hermostats, etc. onvenience outlets, ata, el, etc. igure 0.. " MN side " front " max " min.. L. N 0. - WL L LPN. clear floor or ground space complying with 0 shall be provided. he clear floor or ground space shall not be obstructed by bases, enclosures, or seats.. Parallel pproach - he distance from the edge of the telephone enclosure to the face of the telephone unit shall be 0" maximum. (ig. 0...). orward pproach - he distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 0" maximum. (ig. 0...). he cord from the telephone to the handset shall be " minimum long. N 0. - VLUM NL LPN. Volume control must provide a gain adjustable to 0 d minimum. or incremental volume control, provide at least intermediate step of d of gain minimum. n automatic reset shall be provided. 0" M N 0 - L WNN. runcated domes in a detectable warning surface shall have a base diameter of."-." maximum, a top diameter of 0-% of the base diameter, and a height of.". etectable warning surfaces shall contrast visually with adjacent walking surfaces either light-on-dark, or dark-on light. Platform boarding edges shall be " wide and shall extend the full length of the public use areas of the platform. N 0 - V LNN YM. eceivers required for use with an assistive listening system shall include a /" standard mono jack.. eceivers required to be hearing-aid compatible shall interface with telecolis in hearing aids through the provision of neckloops.. ssistive listening systems shall be capable of providing a sound pressure level of 0- d with a dynamic range on the volume control of 0d.. the signal-to-noise ratio for internally generated noise in assistive listening systems shall be d minimum. Peek clipping shall not exceed d of clipping relative to the peaks of speech. igure 0. " MN ear wall grab bar at water closets/toilet compartments ide wall grab bar at water closets/toilet compartments "-" "-" "-" " MN /" MN /" MN " L " MN " L " MN " MN " M ide wall " M L U " MN 0" M igure 0... orward approach to telephone 0" M igure 0... Parallel approach to telephone P : PLUMN LMN N L 0" MN rinking fountain spout location mbulatory accessible toilet compartments Wheelchair accessible toilet compartment doors eight and depth of urinals igure 0... ransfer ype shower comparment size and clearance eight of tactile characters above finish floor or ground NN PN NN UNN 0" MN & N LN "-" " M " MN " MN L L P. 0 P. 0 NL WLL.L. L MNNL NMN L LN N - W W NLN WLL W NLN WLL (MULY) W P ( P) PN LV. MN. N L. LV. M M/UNP LV. M U M N M V LV., M M LV U M N V LV., M M LV U MN P M M LW PU M /N PN PU NL UL ( +) - - - N W/L LV/M NN UNN " MN - " M " MN - " M " MN - 0" M 0" MN - " M 0. 0. 0. 0. 0. 0. 0.. 0.. 0. 0. 0. 0. 0. 0. 0. " - " " - " " - " " " - " " - " " - " " - " " W PP NLY " " 0" " " " MN - " M NY NL @ " M W MN " LN WN UPP NL MMN " " - " " W PP NLY " W PP NLY PLLL PP LLW " - " " - " " - " " - 0" " " - " 0" - " " - " " - " " " 0" (PU MU /" M. N) 0" (PU MU /" M. N) 0" (PU MU /" M. N) " MN " M " MN - " M " MN " MN " M LV U 0" M M LV U " MN P L L P " MN 0" MN " M " MN Lavatory etail N 0 - WY N 0. - N. ll steps on a flight of stairs shall have uniform riser heights and tread widths. Minimum tread depth shall be ", measured from riser to riser (not including nosing). pen risers are not permitted. isers shall be " high min. - " high max. N 0. - NN (N U 0.). adius of the curvature at the leading edge shall be /" maximum. isers shall be permitted to slope under the tread at an angle of 0 degrees maximum from vertical. he permitted projection of the nosing shall extend /" maximum over the tread below. /" Ø L PP NL Provide non-slip tooled joints at each step run inish grade at last tread to be flush = W " M. /" M < " " - " igure 0.0. N 0 - NL (N U 0.0., 0.0., ). andrails shall be provided on both sides of stairs and ramps. Non-continuous stair handrails shall extend " beyond the top riser and the width of one tread beyond the bottom riser. t the top, the extension shall be parallel to the floor. t the bottom, the handrail shall continue to slope for a distance of one tread width. Non continuous ramp handrails shall extend " minimum beyond the top and bottom of ramp runs.. eight: "-", measured from the stair nosing.. learance between handrail and adjacent surfaces shall be /" minimum.. andrails shall not rotate within their fittings.. andrails are required on ramp runs greater than " in rise. NL UV NN VL NN 0 M /" M /" M igure 0. /" MN " - " " M ection. L @ MP NLY N U /" Ø L PP lope urb ramp Landing " MN " MN tair nosings op and bottom handrail extension at ramp " MN igure 0.0., op and bottom handrail extension at stairs W L L MPMN P : PLUMN LMN N L (NNU) / Post ign idewalk ace of curb or sidewalk or paint stripe '-0" long concrete wheelstop (nly when pavement is flush with walk) Paving flush with sidewalk or provide curb ramp tandard handicapped symbol " MN. ULL LN PN P 0" MN " MN where van parking is " " painted lines, YP. ee pecifications igure 0. V L VN L Min. /" Ø ched. 0 galvanized x '-0" ". '-". 0" MN. '-". 0" M. Provide one sign at each disabled (designated) parking space N: VL PULL-UP P ULL LN 0" MN. U igure 0. L UML PN LN ZN N 0 - PN P (N U 0.). ccessible car parking spaces shall be at least " minimum wide and van accessibleparking shall be " minimum wide.. Van parking spaces may be " wide minimum where there is an access aisle " wide minimum.. ccess aisles serving car and van parking shall be a minimum 0" wide and shall adjoin an accessible route.. ccess aisles should be marked to discourage people from parking in them and extend the full length of the parking space.. urface slope shall not exceed : in all directions (Note: no built up curb ramp may be located in an accessible parking access aisle.). ccess aisles shall not overlap the vehicular way.. ccess aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces, which shall have access aisles located on the passenger side of the parking space. N 0 - PN LN ZN. Passenger loading zones shall provide a vehicular pull-up space " wide minimum and 0' long minimum. N 0. - L (N U 0.). Passenger loading zones shall provide access aisles complying with 0 adjacent to the vehicle pull up space. ccess aisles shall adjoin an accessible route and shall not overlap the vehicular way.. ccess aisles serving vehicular pull-up spaces shall be 0" wide minimum and extend the full length of the vehicle pull-up spaces they serve. lopes steeper than : are not permitted. hanges in level of the floor & ground surface are not permitted.. Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone, and from the passenger loading zone to a vehicular exit shall provide a vertical clearance of " min. P : NL N ULN LMN hall comply with 0... " MN " MN (VN) area to be marked 000 P N Parking space access aisle Passenger loading zone access aisle **N: " " N N PN M M P 0 N N. YM,. office:.. fax:.. Y M, N. 0 N V, PU, 0 his drawing is the property ofhis drawing opyright ykema rchitects, nc. P N. VN: //0 :: M outh Port venue, orpus hristi, : 0//0 N - Port venue acility ddition 0. 0 P 0 0