Snow Blade Operator s/assembly Instructions
|
|
- Homer Welch
- 6 years ago
- Views:
Transcription
1 Snow Blade Operator s/assembly Instructions
2 TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5 Assembly Installation and Removal...7 Adjustments...7 Maintenance (8/00)
3 SAFETY MESSAGES CAUTION The safety messages contained in this manual are to be used together with the Safety Messages appearing in the tractor operator s manual. Be sure to review both carefully before operating the tractor snow plow combination. CAUTION: Regard your snow plow as a piece of power equipment and be sure this is understood by all who operate it. CAUTION: Never allow children or young teenagers to operate the tractor and snow plow. CAUTION: Be sure you know how to stop the tractor and snow plow at a moment s notice. CAUTION: Check the tractor and plow to make sure that both are in good operating condition. CAUTION: Fill gas tank outdoors and avoid spilling gasoline. Do not fill tank with gasoline while smoking or while engine is running. CAUTION: Keep the area of operation clear of all persons particularly small children. ALWAYS: 1) Shut off tractor engine, 2) Set parking brake, and 3) Wait for all motion to stop. BEFORE approaching or allowing anyone else to approach the front of the tractor to: 1) Change position of snow plow, 2) Service or adjust snow plow or tractor, or 3) For any other reason. CAUTION: Before the first snowfall, the area in which snow removal is to take place should be cleared of all stones, sticks, ect., which might be picked up by the snow plow. OBSTACLES SUCH AS DRIVEWAY MARKERS, WATER OR GAS SHUTOFFS, ECT. SHOULD BE MARKED SO THEIR LOCATIONS UNDER THE SNOW ARE VERY OBVIOUS. CAUTION: Stop engine and lower snow plow when tractor is unattended. CAUTION: Never direct snow discharge at people or buildings. CAUTION: Give complete and undivided attention to the job at hand. CAUTION: Extreme caution should be exercised under slippery conditions. Reduce forward speed. Install tire chains and wheel weights to traction wheels for added safety. CAUTION: Never attempt to service or make adjustments to the snow plow while the tractor is running. CAUTION: Do not allow anyone other than the operator to ride on the tractor or to be towed behind. WARNING: Contact by any part of the body with the snow plow can result in serious injury. CAUTION: Do not allow anyone to ride on top of the snow plow for weight. CAUTION: Extra care should be used around the cutting edge. This edge may become sharp and jagged during and after use. IMPORTANT: Always install new decals whenever the old decals are destroyed, lost, painted over or illegible. When individual parts are replaced that have decals attached, be sure to install a new decal with the new part. Replacement decals are available from your factory authorized Dealer. INTRODUCTION 3
4 This Operator s Manual includes: a) Safety Rules b) Operating Procedures c) Assembly d) Installation and Removal Procedures e) Adjustments f) Maintenance Read this manual before operating your snow plow. See your factory authorized dealer for parts or repairs. The words Right, Left, Front, and Rear as used in this manual indicate directions when you are in the operator s seat in the normal operating position. WE SHARE YOUR DESIRE TO PROTECT YOURSELF, YOUR FAMILY, YOUR FRIENDS AND YOUR NEIGHBORS FROM ACCIDENTAL INJURY. OBSERVING AND ENFORCING THE FOLLOWING GUIDELINES WILL HELP TO INSURE THE SAFETY OF EVERYONE. PREPARING FOR SNOW REMOVAL To become familiar with the controls, operate the tractor and snow plow in a clear area before removing snow. The more familiar you become with the snow plow the better the results you will have in it s use. A light coat of wax applied to the face of the snow plow will help to prevent snow and slush from sticking. This should be waxed several times during the snow removal season. Use any good commercial grade of paste wax or spray silicone which is available from your dealer or from your local hardware store. Allow ample engine warm up time before starting snow removal. CAUTION: Do not allow anyone other than the operator to ride on the tractor or to be towed behind. Best results are obtained when snow is removed as soon as possible after it falls. Check each item covered in the Adjustments and Maintenance sections of this manual before operating the snow plow. CAUTION: Before the first snowfall, the area in which snow removal is to take place should be cleared of all stones, sticks, ect., which might be picked up by the snow plow. OBSTACLES SUCH AS DRIVEWAY MARKERS, WATER OR GAS SHUTOFFS, ECT. SHOULD BE MARKED SO THEIR LOCATIONS UNDER THE SNOW ARE VERY OBVIOUS. OPERATING PROCEDURE 4
5 CAUTION: Never direct snow discharge at people or buildings. 1. Whenever possible, push snow down hill. 2. Do not attempt to remove ice or hard packed frozen snow by ramming into it with the blade at high speeds. 3. Always overlap each pass slightly to assure complete snow removal. 4. Use extreme care when pivoting the snow plow. Keep hands and feet out from under the cutting edge. WARNING: Contact by any part of the body with the snow plow can result in serious injury. CAUTION: Extra care should be used around the cutting edge. This will become sharp and jagged during and after use. ALWAYS: 1) Shut off tractor engine, 2) Set parking brake, and 3) Wait for all motion to stop. BEFORE approaching or allowing anyone else to approach the front of the tractor to: 1) Change position of snow plow, 2) Service or adjust snow plow or tractor, or 3) For any other reason. OPERATING CONTROLS See your tractor Operator s Manual for correct use of your controls. Attachment Lift Lever The snow plow is raised and lowered with the attachment lift lever. Angle Adjustment The angle is changed by removing the swivel lock pin, pivoting the blade to the desired position, then replacing the pin. You have five positions to choose from. This controls the direction the snow is discharged. TIRE CHAINS AND WHEEL WEIGHTS The use of tire chains and wheel weights is recommended for snow removal operation. The extra traction resulting gives the tractor operator maneuverability in handling heavy snow removal jobs. These accessories are sold by your dealer and are not included with the snow plow. CAUTION: Extreme caution should be exercised under slippery conditions. Reduce forward speed. Install tire chains and wheel weights to traction wheels for added safety. 5
6 ASSEMBLY Tractor Preparation Remove the deck and belt from the tractor and release tension on the deck lift spring. Remove the second and third bolt from the back of the mower frame rails. Note the length of these bolts and use bolts from the frame kit hardware sack that are ¼ longer in length. Use new stover nuts provided to reassemble. Hang the front down hanger on the front bolt and the rear down hanger on the rear bolt. The Rear down hanger goes on the outside of the engine guard and under the spring anchor weldment. Use the ¾ diameter clevis pin to align the holes in the bottom end of the hangers and tighten the bolts. Re-tension the deck lift spring. STOVER NUTS ENGINE GUARD REAR DOWN HANGER SPRING ANCHOR WELDMENT LONGER BOLTS FRONT DOWN HANGER DECK LIFT SPRING Push Blade Assembly Mount the swivel weldment to the blade head using the pivot pin, cotter pin and lock pin as shown. BLADE PIVOT PIN COTTER PIN LOCK PIN SWIVEL WELDMENT 6
7 ½ NUT Mounting the Snowplow Head Mount the plow head to the frame using four ½-13 x 1 ½ bolts. The frame mounting plates go on the inside of the mounting rails of the swivel weldment. Use two bolts with lock washers and flat washers on the rear holes and front holes. Secure both front bolts with a nut. Lift Rod Assembly ½ -13 x 1 ½ BOLTS ½ LOCK WASHER ½ FLAT WASHER INSTALLATION AND REMOVAL Slide the frame work under the tractor from the front and tie up the link bars to prevent rubbing on the frame. Lift the back of the frame up into alignment with the down hangers. Secure with ¾ x 2 clevis pin and hair pin retainers. pins into the holes from the inside out then install the 1/2 flat washer and rue ring. Use 3/8" bolts in lift rod ass'y for blade height adjustment. Do not adjust deck hanger rods. To remove simply reverse the process outlined here. Fasten lower lift handle in the down position. Place lift rod assembly under the middle of the frame and raise it up to the hanger rods. Insert ½ x 2 clevis ADJUSTMENTS Angle Adjustment Cutting Edge The angle is changed by removing the swivel lock pin, pivoting the blade to the desired position, then replacing the pin. You have five positions to choose from. This controls the direction the snow is discharged. The cutting edge can be reversed when the leading edge wears down. 7
8 MAINTENANCE Caution: Check the tractor and plow to make certain both are in good operating condition. Caution: Never attempt to service or make adjustments while the tractor is running. At the end of the snow season the following steps are recommended: 1. Remove the snow plow from the tractor following the procedure in this manual. 2. Wash off any salt deposit which may have dried on the auger and chute. Paint or cover exposed metal with a light coat of oil. 3. Store snow plow in a dry place. 8
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationSHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT
SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationATV WP2 FRONT MOUNT PUSH TUBE
ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationA.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual
70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationFor Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationDR REDI-PLOW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.
DR REDI-PLOW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and understand
More informationSK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationINSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400
INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN 63840 Application:2002 and newer+ Suzuki Eiger 400 Your safety, and the safety of others, is very important. To help you make informed
More information50 Gordon Drive, Rockland, Maine sherplows.com. STORM BOXX Snowplow. 10' and 12' Box Plow for Backhoe Loaders
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 83180, 83185 May 15, 2013 Lit. No. 43687, Rev. 00 STORM BOXX Snowplow 10' and 12' Box Plow for Backhoe Loaders Owner's
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationSKID STEER LOADER SNOWPLOW SCOOP PLOW MODELS 2680, 2690
SKID STEER LOADER SNOWPLOW SCOOP PLOW MODELS 2680, 2690 OPERATOR S MANUAL DO NOT USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL HAS BEEN READ AND THOROUGHLY UNDERSTOOD PART NUMBER 25012422 Rev. A Table
More informationPOWER PUSHER Snowplow
May 15, 2013 Lit. No. 43682, Rev. 00 POWER PUSHER Snowplow 8' 72040; 10' 72045; Box Plow for Skid-Steer Loaders Owner's Manual and Installation Instructions Original Instructions CAUTION Read this manual
More informationINSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationOPERATION & MAINTENANCE MANUAL MODEL LDA
OPERATION & MAINTENANCE MANUAL MODEL LDA Table of Contents PAGE Getting to Know Your Snowman Pull Plow...2 Model 65 LDA, 75 LDA and 85 LDA Specifications...3 Mounting your Snowman Pull Plow To Your Vehicle...4
More informationService Information Letter SIL # 017
Service Information Letter SIL # 017 Trunnion Adjustment - Double Barrels Only Equipment: Double Barrels With Sloped Trunnions Date Issued: 9-24-03 Additional Reference: SIL # 016 Revised: Revision #:
More informationLDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
LDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationSKID STEER LOADER SNOWPLOW STEEL STRAIGHT PLOW MODELS 2275, 2280, 2285 SCOOP PLOW MODELS 2682, TRIP EDGE STRAIGHT PLOW MODEL 2103
SKID STEER LOADER SNOWPLOW STEEL STRAIGHT PLOW MODELS 2275, 2280, 2285 SCOOP PLOW MODELS 2682, 2692 10 TRIP EDGE STRAIGHT PLOW MODEL 2103 OPERATOR S MANUAL DO NOT USE OR OPERATE THIS EQUIPMENT UNTIL THIS
More informationOwners manual. Sears PLOW MODEL NO CAUTION: Read Rules for Safe Operation and Instructions Carefully
Sears Owners manual PLOW MODEL NO. 917.253010 CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operating Maintenance Repair Parts SEARS, ROEBUCK AND CO. U.S.A. SIMPSONS-SEARS
More informationINSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR
1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated
More informationCRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New Brunswick CANADA E7P 2K5
SNOWPLOW 0600 0600 Series Hydraulic Reversible Snowplow owner s manual. Read before operating. Important safety and operation instructions inside. CRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New
More informationconfront fury
confront WINTER S fury WITH A COTECH SNOW PLOW www.cotech.ca table of content mission...2 Snow Removal Equipment...4 Snow plows with a trip system... 4 Extendable Reversible Snow Plows... 6 Inverted Snow
More informationFORK-MOUNTED SNOW PLOW, MODEL SPB-N-72 INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationOPERATION & MAINTENANCE MANUAL MODELS: SC, CASHSAVER, RS
OPERATION & MAINTENANCE MANUAL MODELS: SC, CASHSAVER, RS Table of Contents PAGE Getting to Know Your Snowman Pull Plow...2 Models of Snowman Plows...3-4 Mounting your Snowman Pull Plow To Your Vehicle...5
More informationImportant Instructions
Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More information1073 Series One Way Snowplow owner s manual. Read before operating. Important safety and operation instructions inside.
1073 ONE WAY 1073 Series One Way Snowplow owner s manual. Read before operating. Important safety and operation instructions inside. CRAIG MANUFACTURING LTD. 96 McLean Ave. Hartland, New Brunswick CANADA
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed
More information1,836 people die and 136,309 people are injured every year from icy roads in the US.
Winter Driving The United States Department of Transportation (USDOT) Federal Highway Administration reports that 1,836 people die and 136,309 people are injured every year from icy roads in the US. 2
More informationInstallation instructions, accessories. Snow chains
Instruction No 30664147 Version 1.0 Part. No. Snow chains R7700468 страница 1 / 15 Equipment A0000162 R7700458 страница 2 / 15 R7700448 страница 3 / 15 INTRODUCTION Read through all of the instructions
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationOWNER S MANUAL. Daniels Wing Plow. Operating Instructions Illustrated Parts List
OWNER S MANUAL Daniels Wing Plow Operating Instructions Illustrated Parts List 1 Congratulations! By purchasing this Daniels Wing Plow, you can now benefit by owning the latest in state-of-the-art snow
More information2010 Winter Weather Advisory
2010 Winter Weather Advisory Winter Has Arrived! Temperatures are cooler/downright cold! Ice may exist even when ambient temps are above freezing, especially in early mornings or following a hard freeze
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More information50 Gordon Drive, Rockland, Maine HC Series Snowplows. Installation Instructions CAUTION
Fisher Engineering 79000, 79200 (CH), 79250, 79350 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com May 15, 2018 Lit. No. 77138, Rev. 00 HC Series Snowplows Installation Instructions Read
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationSKID STEER LOADER SNOWPLOW V-PLOW MODELS 2985, 2995
SKID STEER LOADER SNOWPLOW V-PLOW MODELS 2985, 2995 OPERATOR S MANUAL DO NOT USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL HAS BEEN READ AND THOROUGHLY UNDERSTOOD PART NUMBER 25012437 Rev. A Table of
More informationsaxon Instruction Manual saxon Grandeur Brass Telescope High quality optics
saxon High quality optics Instruction Manual saxon Grandeur Brass Telescope WARNING! Do not use the telescope to look at the sun without an appropriate solar filter. Looking at or near the sun can result
More informationAutomatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR
Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR CST/Berger 2001 SAL 20/24/28/32 PAGE 1 REV. C 071803 Automatic Level Maintenance Manual User Calibration and Testing... 3 Circular
More informationER2 Short-head Electric Chain Hoist
O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in
More informationINSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES
INSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES 2018 TESLA, INC. All rights reserved. All information in this document and all MODEL 3 software is subject to copyright and other intellectual property
More informationModel: AVAL8219 AVAL8422 DETAIL K2 INC. DK2 Snowplow. Instruction manual
Model: AVAL8219 AVAL8422 DETAIL K2 INC. DK2 Snowplow Instruction manual TABLE OF CONTENTS Important Safe Operating Practices... En.3 General... En.3 Personal Safety... En.3 Snow Plow... En.4 Vehicle...
More informationSnow Plow Safety Quick Reference Guide
PUBLIC WORKS INITIATIVE Snow Plow Safety Quick Reference Guide INTRODUCTION This quick reference guide highlights snow removal/snow plow safety practices. Its purpose is to help prevent personal injury
More informationNordic Plow. Zero Turn 49 Blade Plow DANSK...18 ENGLISH...11 NORSK FRANCAIS...12 SVENSKA...20 PORTUGUES...16 XXXXXX...
Zero Turn 49 Blade Plow by Nordic Plow... 3 DANSK...18 ENGLISH...11 NORSK... 19 FRANCAIS...12 SVENSKA...20 ITALINO... 13 NEDERLANDS... 14 ESPANOL... 15 POLSKI...21 CESTINA...22 MAGYAR...23 PORTUGUES...16
More informationChapter 3 Snow & Ice Training Program Annual Review Checklist Wing Plow Operational Guidelines
Chapter 3 Snow & Ice Training Program Annual Review Checklist Wing Plow Operational Guidelines Snow & Ice Training Program WSDOT employees are our most important resource and providing a safe environment
More informationLEAPERS, INC. RED/GREEN DOTS
LEAPERS, INC. 1 RED/GREEN DOTS range estimating scopes UTG reticle intensified scopes TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICEwww.LEAPERS.com 32700 Capitol
More informationCOMMON BLACK IRON & BLADE PARTS
LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL
More informationHD Series & XBLADE Snowplows
Fisher Engineering 27500, 28000, 28100-1 28500, 29000, 29100-1 75000, 75500 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com August 1, 2012 Lit. No. 49593, Rev. 02 HD Series & XBLADE Snowplows
More informationHow to Check Your G4 Spread Pattern
How to Check Your G4 Spread Pattern MANUAL NUMBER: EFFECTIVE 04/0 0 6TH AVE SW CEDAR RAPIDS, IA 5404-05 PHONE FAX (9) 86-50 www.new-leader.com Copyright 0 Highway Equipment Company, Inc. Spread HeaderPattern
More informationAssembly Manual for the Brevard Astronomical Society 16 inch F4.5 Dobsonian Telescope Brevard Astronomical Society P.O. Box 1084 Cocoa, FL 32922
BAS 16 Telescope Manual Rev 1 Assembly Manual for the Brevard Astronomical Society 16 inch F4.5 Dobsonian Telescope Brevard Astronomical Society P.O. Box 1084 Cocoa, FL 32922 TABLE OF CONTENTS SECTION
More informationR a t i o n a l i s e d B r a k e A c t u a t o r s
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t C a t a l o g u e R a t i o n a l i s e d B r a k e A c t u a t o r s... for Air Disc Brake applications Disclaimer The information contained
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationCOMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE
3 0 15 15 E OWNER S MANUAL COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE 5 W 60 W 30 W 45 W Zhumell customers know that there are plenty of ways to experience the world. They also understand
More informationSNOWPLOW ACCESSORIES. Factory Original Parts
Factory Original Parts Your WESTERN snowplow is a valuable investment. The best way to assure original equipment reliability and efficiency is to purchase only genuine Western Factory Original parts and
More informationWARRANTY SERVICE. Your satisfaction and goodwill are important to your dealer and to us. All Honda
WARRANTY SERVICE Your satisfaction and goodwill are important to your dealer and to us. All Honda warranty details are explained in the Distributor's Limited Warranty at the back of this booklet. Normally,
More information3-IN-1 PLOW Operator s Manual 844.BLU.PLOW ( )
3-IN-1 PLOW Operator s Manual 844.BLU.PLOW (844.258.7569) www.danielsplows.com Congratulations! By purchasing the Daniels 3in1 Plow, you can now benefit by owning the latest in the state-of-the-art snow
More informationMust Read Before Installation TadPoleTM Safety and Warnings
Must Read Before Installation TadPoleTM Safety and Warnings The recommendations, requirements, rules, and instructions of your Vehicle's Roof-Top Rack System should ALWAYS be followed. The TadPole TM,
More informationRiver City Cuckoo Clocks, L.L.C.
River City Cuckoo Clocks, L.L.C. Clock Care and Setup Instructions Congratulations on purchasing a River City Cuckoo Clock! We are confident that this original Black Forest Cuckoo Clock will add character
More informationElectron Microscopy Sciences INSTRUCTION MANUAL. Stereo Microscopes Non-illuminated Stands
Electron Microscopy Sciences 1 INSTRUCTION MANUAL Stereo Microscopes Non-illuminated Stands Model GL7-207: Binocular, 6.5:1 Zoom Ratio 10X to 65X, smooth ball bearing construction and Model GL7-307: Trinocular,
More informationUniversal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
More informationproduct manual H-4204 Proving Ring Penetrometer
05.09 product manual H-4204 Proving Ring Penetrometer nnmm Handle Proving Ring Extension Rod Coupler Penetration Rod Cone Figure #1 General Information The Proving Ring Penetrometer is a cone type of penetrometer
More informationVELA Tango 100. VELA Tango 100A. VELA Tango 200 GAS
UK VELA Tango 100 VELA Tango 100A VELA Tango 200 U S E R G U I D E V E L A T A N G O 1 0 0 / 1 0 0 F B / 1 0 0 A / 2 0 0 GAS CONTENT 1.0. INTRODUCTION... 3 1.1. SAFETY... 3 1.2. WARRENTY... 4 1.3. UNPACKING
More informationproduct manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
More informationTelescope Sight 4 X 24 for G3 Rifle
Telescope Sight 4 x 24 For G3 Rifle Telescope Sight 4 X 24 for G3 Rifle Instruction Manual HECKLER & KOCH, INC. 2148 Pacific Boulevard Sterling, Virginia 20166-8903 U.S.A. TEL. (703) 450-1900 TELEFAX (703)
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationEdition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More informationOperating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2
Operating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2 P/N VALTOL-KT2 Revision 2.0 October 7, 2014 Prepared by: Quality Lab Accessories, LLC 100 Emlen Way, Suite 108 Telford,
More informationAssembly Instructions for the 1-Wire Weather Station V2.0/V3.0
Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Tools and Supplies Required (not included): Phillips screwdriver 3/8" wrench Drill with 5/32" bit "U" type mounting bracket (i.e., part number
More informationSPARE PARTS LIST CHAIN SAWS CS35S, & ,
SPARE PARTS LIST CHAIN SAWS CS35S, 967624714 & 967624715,2016-08 Revision Note item Position description Revision 1 combine 14"easy start CS 35S & CS 35S FA 2 Page O change the article no. from 586998601
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER BTS21
0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE
More informationZFK 4 X 25. Description and Utilization Instructions
1. Clarification of Concept The ZFK 4 x 5 is a telescopic sight with fixed magnification with dual cross hair adjustments, central viewing, and attached mount. ZFK 4 X 5 Description and Utilization Instructions.
More informationOWNER S MANUAL AND USER S GUIDE. Read the Path Pro 2 Owner s Manual before operating or servicing a snow plow. FOLLOW THESE INSTRUCTIONS EXPLICITLY.
OWNER S MANUAL AND USER S GUIDE Read the Path Pro 2 Owner s Manual before operating or servicing a snow plow. FOLLOW THESE INSTRUCTIONS EXPLICITLY. 1 2 Thank You Thank you for buying the Path Pro 2 By
More informations s t L e 46 APACHE TRACK SYSTEM ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS OVERSIZE 25.4 CM CORNER WHEELS
APACHE TRACK SYSTEM S ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS EASY-STEER NEW PATENT PENDING POINT OF ROTATION COMPRESSION MOLDED PLASTIC DRIVE SPROCKET OVERSIZE 25.4 CM CORNER
More informationCPI SNOW PLOW KIT ASSEMBLY INSTRUCTIONS
CPI SNOW PLOW KIT ASSEMBLY INSTRUCTIONS Thank you for purchasing the CPI Snow Plow Kit! These instructions will walk you through the basic assembly of the snow plow kit. Contents Each kit contains the
More information260A Tractor, Loader & Backhoe S/n & up
International Harvester Service Manual 260A Tractor, Loader & Backhoe S/n 200501 & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT
More informationINVITATION TO BID. Martha L. Rehbein City Clerk. Publish: March 15 th, 2015 March 22 nd, 2015
INVITATION TO BID Notice is hereby given that sealed bids will be received at the City Clerk's Office, City Hall, 435 Ryman Street, Missoula, MT 59802-4297 until 3:00 p.m., Monday, March 30 th, 2015 and
More informationExperiment C-15 Distillation - part 1
1 Experiment C-15 Distillation - part 1 Objectives To learn about the three classical phases of matter, phase changes, and heating and cooling curves. To investigate the technique of distillation and to
More informationORTHOBLOC 3000 Drive systems Maintenance
15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products
More informationB Left-hand case side (x1) F
MD693/ HD-1688 WOODEN RADIO-CONTROLLED GRANDFATHER CLOCK WITH WESTMINSTER CHIMES INSTRUCTIONS PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE YOU SET YOUR CLOCK GOING AND ENSURE YOU KEEP HOLD OF THESE
More informationAK-47/74 Barrel and Front Trunnion Rivet Removal
AK-47/74 Barrel and Front Trunnion Rivet Removal The following steps are used for barrel center pin, barrel and front trunnion rivet removal on AK- 47/74 type rifles. Special jigs and fixtures were used
More informationREPAIR PARTS. DX17VS Outdoor Inverter. This manual is to be used by qualified technicians only.
REPAIR PARTS DX17VS Outdoor Inverter DX17VSS181AA DX17VSS241AA DX17VSS01AA DX17VSS61AA DX17VSS421AA DX17VSS481AA DX17VSS601AA This manual is to be used by qualified technicians only. 2018 5151 San Felipe
More information