FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance Tolerance (120Hz 20 C) Leakage Current Surge Voltage I 0.01CV or 3(uA) (20 C) *Whichever is greater after 3 minutes (20 C) Characteristic - 40 ~ +105 C 6.3 ~ 100VDC 20%(M) I : Leakage Current ( A) C : Rated Capacitance( F) V : Working Voltage (V) W.V. 6.3 10 16 25 35 50 63 100 S.V. 8 13 20 32 44 63 79 125 Dissipation Factor ( tan ) Add 0.02 per 1000uF for more than 1000uF (120Hz 20 C) W.V. 6.3 10 16 25 35 50 63 100 Low Temperature Stability Load Life Shelf Life tan 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 Impedance ratio at 120Hz Rated Voltage (V) 6.3 10 16 25~100-25 C / +20 C 4 3 2 2-40 C / +20 C 8 6 4 3 After application of W.V. and +105 C ripple current value, the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) Rated Voltage (V) 6.3~10 16~100 Life Time D 6.3mm 4000hrs, D8~10mm 6000hrs, D 12.5mm 8000hrs Capacitance Change 25% of initial value. Dissipation Factor Leakage Current 200% of initial specified value initial specified value D 6.3mm 5000hrs, D8~10mm 7000hrs, D 12.5mm 10000hrs At +105 C no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. ( with voltage treatment ) PART NUMBER SYSTEM RFB 63V 101 M TA 10x16 DIMENSIONS (mm) Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uf), First two digits are significant figures, Third digit denotes number of zeros. R denotes decimal point for values less than 10uF Tolerance M - 20% Package Code TA TR Blank Tape & Ammo Tape & Reel Case size (D) Diameter x (L) Length in mm (Optional) D 5 6.3 8 10 12.5 16 18 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 a 1.5 1.5 1.5 1.5 1.5 1.5 1.5
RIPPLE CURRENT COEFFICIENTS Coefficient Frequency(Hz) 120 1k 10k 100k 0.47~10uF 0.42 0.60 0.80 1.00 22~33uF 0.55 0.75 0.90 1.00 47~330uF 0.70 0.85 0.95 1.00 470~1000uF 0.75 0.90 0.98 1.00 2200~15000uF 0.80 0.95 1.00 1.00 Temperature( C) 65 85 105 Multiplier 2.12 1.69 1.00 CASE SIZE & MAX RIPPLE CURRENT Cap. (uf) Case size : DxL (mm) Max. impedance : Ω 100kHz Max. ripple current : ma(rms) 105 C 100kHz V 6.3 10 16 Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. 47 5x11 0.568 1.703 150 100 5x11 0.595 1.784 200 5x11 0.482 1.446 210 6.3x11 0.367 1.101 250 220 6.3x11 0.307 0.922 340 6.3x11 0.249 0.747 350 8x11.5 0.190 0.569 430 330 6.3x11 0.246 0.737 410 8x11.5 0.169 0.507 500 8x11.5 0.152 0.455 520 470 8x11.5 0.178 0.534 540 8x11.5 0.138 0.415 560 10x12.5 0.093 0.279 690 1000 10x12.5 0.066 0.199 920 10x16 0.063 0.189 1070 10x20 0.060 0.180 1230 2200 12.5x20 0.038 0.113 1660 12.5x20 0.036 0.108 1720 12.5x25 0.034 0.103 1960 3300 12.5x20 0.032 0.095 1910 12.5x25 0.030 0.090 2170 16x25 0.029 0.086 2570 4700 16x25 0.027 0.080 2660 16x25 0.025 0.076 2730 16x31.5 0.024 0.073 3100 6800 16x25 0.024 0.071 2920 16x31.5 0.023 0.068 3300 18x35.5 0.022 0.065 3800 10000 16x31.5 0.021 0.064 3450 18x35.5 0.020 0.061 3940 15000 18x35.5 0.020 0.061 4130 Cap. (uf) V 25 35 50 Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. DxL 20 C -10 C 0.47 5x11 5.658 16.973 25 1.0 5x11 3.989 11.966 36 2.2 5x11 2.417 7.252 55 3.3 5x11 2.014 6.043 65 4.7 5x11 1.697 5.092 80 10 5x11 1.330 3.989 110 22 5x11 0.725 2.176 140 33 5x11 0.672 2.015 150 5x11 0.635 1.905 160 6.3x11 0.564 1.692 200 47 5x11 0.539 1.616 170 6.3x11 0.510 1.529 210 6.3x11 0.453 1.358 230 100 6.3x11 0.348 1.045 280 8x11.5 0.329 0.988 370 8x14 0.292 0.877 420 220 8x11.5 0.180 0.540 480 10x12.5 0.128 0.383 640 10x16 0.113 0.340 760 330 10x12.5 0.108 0.324 700 10x16 0.102 0.306 870 10x20 0.091 0.272 1020 470 10x16 0.088 0.265 860 10x20 0.084 0.251 1070 12.5x20 0.074 0.223 1290 1000 12.5x20 0.057 0.171 1580 12.5x25 0.054 0.162 1940 16x25 0.048 0.144 2390 2200 16x25 0.032 0.097 2540 16x31.5 0.031 0.092 3070 18x35.5 0.027 0.082 3650 3300 16x31.5 0.027 0.081 3180 18x35.5 0.026 0.077 3870 4700 18x35.5 0.023 0.069 3880 R.C.
CASE SIZE & MAX RIPPLE CURRENT Cap. (uf) Case size : DxL (mm) Max. impedance : Ω 100kHz Max. ripple current : ma(rms) 105 C 100kHz V 63 100 Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. 0.47 5x11 5.301 15.902 26 1.0 5x11 3.737 11.211 37 2.2 5x11 2.265 6.794 55 3.3 5x11 1.887 5.662 65 4.7 5x11 1.590 4.771 80 10 5x11 1.246 3.737 120 6.3x11 1.246 3.737 130 22 6.3x11 0.679 2.038 180 8x11.5 0.679 2.038 190 33 8x11.5 0.528 1.585 250 10x12.5 0.317 0.951 270 47 8x11.5 0.424 1.272 280 10x16 0.254 0.763 350 100 10x16 0.192 0.575 530 12.5x20 0.164 0.493 640 220 10x25 0.099 0.297 960 16x25 0.085 0.255 1200 330 12.5x25 0.079 0.238 1330 16x25 0.068 0.204 1470 470 12.5x30 0.065 0.195 1610 1000 16x35.5 0.042 0.126 2900
TAPING SPECIFICATION Lead taping is designed for automatic insertion equipment. Capacitors with case size of 18mm x 35.5mm or smaller are available in taping type. DIMENSIONS (Ø4~ Ø10) Item Symbol Case Size 4 x 5 5 x 5 6.3x5 8 x 5 4 x 7 5 x 7 6.3x7 8 x 7 5 x 11 6.3x11 8 x 11.5 10x12.5 10x16 10x18 10x20 Tolerance Lead wire diameter d 0.45 0.5 0.6 ±0.05 Body height A 6.0 8.0 12.5 13 14 17.5 19.5 21.5 MAX Intervals of bodies P 12.7 ±1.0 Intervals of punched holes holes and lead wire holes and bodies lead and lead P 0 12.7 ±0.2 P 1 Remark Fig 1. 3.85 Fig 4. ±0.7 5.35 5.1 5.1 5.35 5.1 5.1 5.1 Fig 2. 5.6 5.35 5.1 5.1 5.6 5.35 5.1 4.6 5.35 5.1 4.6 Fig 3. P 2 6.35 ±1.0 F 5.0 2.0 2.5 2.5 2.0 2.5 2.5 2.5 1.5 2.0 2.5 2.5 1.5 2.0 2.5 3.5 2.0 2.5 3.5 Base tape width W 18.0 ±0.5 Adhesive tape width W 0 12.5 MIN holes and base tape adhesive and base tape body bottom and tape Lead wire clinched height body top and tape Punched hole diameter Length of not good lead slit Base and adhesive tape thickness +0.8-0.2 W 1 9.0 ±0.5 W 2 1.5 MAX H 17.5 18.5 20.0 18.5 17.5 18.5 18.5 H 0 16.0 ±0.5 H 1 24.5 27.5 32.5 33.0 36.0 38.0 41.0 MAX D 0 4.0 ±0.3 L 11.0 MAX t 0.6 ±0.3 h 0 ±2.0 h 1 0 ±1.0 ±0.5 Fig 1. Fig 4. Fig 2. F 1 :5.0 +0.5-1.0 Fig 3. F 1 :5.0 +0.5 Fig 1. Fig 4. Fig 2. Fig 3. -1.0
DIMENSIONS (Ø12.5~ Ø18) Case Size Item Symbol Tolerance 12.5 x 20 12.5 x 25 12.5 x 30 16 x 25 16 x 31.5 16 x 35.5 18 x 35.5 Lead wire diameter d 0.6 0.8 ±0.05 Body height A 21.5 26.5 31.5 26.5 33 37.0 37.0 MAX Intervals of bodies P 15.0 30.0 ±1.0 Intervals of punched holes holes and lead wire holes and bodies lead and lead P 0 15.0 ±0.2 P 1 5.0 3.75 ±0.7 P 2 7.5 ±1.0 F 5.0 7.5 Base tape width W 18.0 ±0.5 Adhesive tape width W 0 15.0 MIN holes and base tape adhesive and base tape body bottom and tape body top and tape Punched hole diameter Length of not good lead slit Base and adhesive tape thickness +0.8-0.2 W 1 9.0 ±0.5 W 2 1.5 MAX H 16.5 18.5 ±0.5 H 1 40.5 45.5 50.5 46.5 53.5 56.5 56.5 MAX D 0 4.0 ±0.3 L 11.0 MAX t 0.6 ±0.3 h 0 ±2.0 h 1 0 ±1.0 Remark Fig 5. Fig 6. Fig 5. Fig 6.
SOLDERABILITY Capacitor lead wire is dipping into the oven, and then, dipping in 245±3, solder liquid for 3±0.5 seconds, the substance is above the liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least. RESISTANCE TO SOLDERING HEAT Put capacitor lead wire to dip 260±5 in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room temperature, should do final measurements, the values are following: (A) Capacitance change: ±10% of initial value (B) Dissipation factor: initial specified value (C) Leakage current: initial specified value (D) Visual: No damage