Ceramic Chip Capacitors

Transcription

1 Ceramic Chip Capacitors Description Series Capacitance Range Circuit Page NPO Series pf ~. uf 2-4 Z5U Series K pf ~ uf 2-6 Ceramic Capacitors X7R Series 39 pf ~.47 uf 2-8 Axial-eaded Epoxy Coated pf ~.47 uf 2- Radial-eaded Epoxy Dipped pf ~ 2 uf 2-4 TSC Electronics, td. Tel: (3) Fax: (3)

2 % D.F. R Ceramic n Chip Capacitors NPO & COG Dielectric CERAMIC DIEECTRIC INTERNA EECTRODE TERMINATION Application NPO (COG) dielectric properties suiter for precision circuits, requiring stable dielectric characteristics: * Negligible dependence of capacitance and dissipation factor on time, voltage, and frequency * ow-loss (High Q) * Predictable linear temperature coefficient * No Piezoelectric behavior General Specification Operating temperature range -55 C ~ +25 C Capacitance Range: pf ~.uf Capacitance Tolerance: ±.25pF, ±.5pF, ±5%, ±% Voltage Ratings, 5VDC, VDC, 2VDC Dissipation Factor ( KHz, or MHz, Vrms, 25 C).5% Max Insulation Resistance (rated voltage applied at 25 C), megohms or, Ohm-Farads min. Dielectric strength > 2.5X. DC. C, D.F. vs. Frequency Coefficient C, vs. Voltage Coefficient % D.F Frequency DC. Volts Applied Insulation Resistance vs. Temp C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, Typical TC DF C TSC Electronics, td. Tel: (3) Fax: (3)

3 Ceramic n Chip Capacitors NPO & COG Dielectric Part Number System 85 COG 472 K H P T SIZE see chart DIEECTIC COG (NPO) SIZES AND VAUES AVAIABE CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE C = +-.25PF D = +-.5PF F = +-% J = +-5% K = +-% M = +-2% VOTAGE H = 5VDC T = VDC U = 2VDC TERMINATION P = pd/ag S = Silver R = Solder N = Nickel barrier PACKING B = Bulk T = Taped & Reeled : STYE * (mm, in) * W(mm, in) T Max(mm, in) EB Min(mm, in) CAP. (PF) Tol ,,2,5,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2, * Tolerance +-.", 7% Whichever is greater W EB T. Max TSC Electronics, td. Tel: (3) Fax: (3)

4 % D.F. R Ceramic n Chip Capacitors Z5U & Y5V Dielectric CERAMIC DIEECTRIC INTERNA EECTRODE TERMINATION Application The Hi-K (Z5U, Y5V) dielectrics deliver high capacitance density and are ideally suited for applications where space is at a premium, or as replacement for tantalum capacitors. Typical applications include use as by-pass or decoupling elements. Best performance is obtained at or near room Temperature, with low D.C. bias (<25 VDCW). General Specification Operating temperature range -3 C ~ +85 C Capacitance Range: pf ~.uf Capacitance Tolerance: ±2%, -2%, +8% Voltage Ratings, 25VDC, 5VDC, VDC (63 Size: 6VDC, 5VDC, VDC) Dissipation Factor ( KHz.5Vrms, 25 C) 5% Max Insulation Resistance (rated voltage applied at 25 C), megohms or 5 Ohm-Farads min Dielectric strength > 2.5X. DC. C. vs. Frequency Coefficient +2 C, vs. Voltage Coefficient KHz KHz KHz MHz MHz MHz Frequency DC. Volts Applied Insulation Resistance (Ohm-Farads) Insulation Resistance vs. Temp. k k C,D.F. vs. Temperature Coefficient D.F Z5U &Y5V CZ5U CY5V TSC Electronics, td. Tel: (3) Fax: (3)

5 Ceramic n Chip Capacitors Z5U & Y5V Dielectric Part Number System 85 Y5V 472 M H N T SIZE see chart DIEECTRIC Z5U & Y5V CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE M = ±2% Z = +8% -2% VOTAGE C = 6VDC E = 25VDC H = 5VDC T = VDC TERMINATION P = Pd/Ag S = Silver R = Solder N = Nickel PACKING B = Bulk T = Taped & reeled SIZES AND VAUES AVAIABE : STYE * (mm,in) * W (mm,in) T Max(mm,in) EB MIN(mm,in) T CAP.(PF) Tol ,,2,5,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8, 5, 22, 33, 47, 68,, 5, 22, 33, 47, 68,,, * Tolerance +-.", 7% Whichever is greater W EB T. Max Gray for Z5U, Y5V Values Available Black for Y5V TSC Electronics, td. Tel: (3) Fax: (3)

6 Ceramic n Chip Capacitors X7R & BX Dielectric CERAMIC DIEECTRIC INTERNA EECTRODE TERMINATION Application X7R & BX dielectric properties; suited for by-pass and coupling purposes, filtering, frequency discrimination, DC blockage, and as voltage transient suppression elements. General Specification Operating temperature range -55 C ~ +25 C Capacitance Range: 39pF ~.47uF Capacitance Tolerance: ±5%, ±%, ±2% Voltage Ratings, 5VDC, VDC, 2VDC Dissipation Factor ( KHz,. Vrms, 25 C) 2.5% Max Insulation Resistance (rated Voltage applied at 25 C), megohms or, Ohm-Farads min Dielectric strength > 2.5X. DC. C. vs. Frequency Coefficient + C, vs. Voltage Coefficient BX X7R -3-4 KHz KHz KHz MHz MHz MHz Frequency DC. Volts Applied Insulation Resistance vs. Temp C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, C - -2 D.F. -5 C -25 C C 25 C 5 C 75 C C 5 C TSC Electronics, td. Tel: (3) Fax: (3)

7 Ceramic n Chip Capacitors X7R & BX Dielectric Part Number System 85 BX 472 K H N T SIZE see chart DIEECTIC BX & X7R CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE J = +/-5% K = +/-% M = +/-2% VOTAGE C = 6VDC E = 25VDC H = 5VDC T = VDC U = 2VDC TERMINATION P = pd/ag S = Silver R = Solder N = Nickel barrier PACKING B = Bulk T = Taped & Reeled SIZES AND VAUES AVAIABE : STYE * (mm, in) * W(mm, in) T Max(mm, in) EB Min(mm, in) CAP. (PF) Tol EB T. Max W 82,,2,5,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2, 2, 5, 8, 22, 27, 33, 39, 47, 56, 68, 82,, 2, 5, 8, 22, 27, 33, 39, 47, * Tolerance +/-.", 7% Whichever is greater TSC Electronics, td. Tel: (3) Fax: (3)

8 Multilayer Ceramic Capacitors Axial-eaded, Epoxy Coated EECTRODES METAIZED END SODER COATED WIRE EADS EPOXY RESIN ENCAPSUATION CERAMIC DIEECTRIC SODER Introduction T.S.C. Axial-eaded Epoxy coated multilayer ceramic chip capacitors are manufactured with modern proven technology exchanged with a U.S. based manufacturer. The process features a high degree of mechanization, operating under precise control while using the highest quality material. A continuous quality assurance program is also maintained to ensure consistent high quality capacitors. T.S.C. capacitors feature superior humidity characteristics, longer life, lower inductance. Features Wide capacitance, T.C., voltage and tolerance range Industry standard sizes Tape and Reel available for auto-insertion Marking standard or to customer specification General Specifications Code Dielectric EIA COG X7R Z5U/Y5V Temperature Characteristics Category (Operating) Temperature Range ±3ppm/ C, C>2 pf +2ppm/ C, C 2pF C to +25 C DC±5% maximum over -55 C to +25 C -55 C to +25 C DC+22%, -56 maximum over + C to +85 C -25 C to +85 C Measuring Conditions for Capacitance and D.F. MHz, Vrms, C pf KHz, Vrms, C>pF KHz, Vrms KHz,.5 Vrms Dissipation Factor (D.F.) and Tangent of oss Angle (tan ).5% 2.5% 4.% Insulation Resistance (I.R.) after 6 secs charging at rated Voltage 25 C Gohms or, M Ω µf whichever is less Gohms or, M Ω µf whichever is less Gohms or, M Ω µf whichever is less Voltage Proof, 25 C 2.5xRated Voltage 2.5xRated Voltage 2.5xRated Voltage Capacitance Aging =.5% per decade hour =5% per decade hour Tape & Reel Dimensions: in.(mm) 2.63±.59 (52.4±.5) Hub.8±.4 (3±) O max no lead protrusion 2.99±.8 (76±2).26 min (3.2) 3.98 (355) max.2±.6 (5.8±.4).47 max (.2) A B ABE MARKED ON a) Part Name b) Customers Part No. c) Our Part No. d) Quantity e) Inspection No (75) max.3 max (.8) A-B.59(.5).236±.39 (6.±.) 2- TSC Electronics, td. Tel: (3) Fax: (3)

9 Multilayer Ceramic Capacitors Part Number System ADO COG 472 K H T TYPE AND SIZE TEMPERATURE CHARACTERISTICS COG=±3ppm (Note ), -55 C to +25 C X7R= ±55%, -55 C to +25 C Z5U= +22, -56%, + C to +85 C Y5V= +22, -82%, + C to +85 C CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE C = ±.25PF D = ±.5PF F = ±% J = ±5% K = ±% M = ±2% VOTAGE H = 5VDC T = VDC U = 2VDC PACKING B = Bulk T = Taped & Reeled Dimensions Inches (Millimeters) D Max.(25.4) Min. ead ength.2(.58) Max EIA Characteristics Dimensions: Inches (Millimeters) Type and Size ength Diameter D AD AD2 AD (4.32) (6.6) (7.37)...5 (2.54) (2.54) (3.8) Marking Capacitance are marked in 3 digits for capacitance above PF, and marked in actual value for capacitance PF and below Capacitance tolerance are marked in code symbol. Temperature Characteristics: C=COG, X=X7R, Z=Z5U, Y=Y5V SIZE Capacitance Tolerance Rated Voltage Temp. Char. AD AD AD 3 TSC Electronics, td. Tel: (3) Fax: (3)

10 Multilayer Ceramic Capacitors Capacitance Range Dielectric Code COG X7R Z5U Z5U Y5V Y5V Size Code AD AD2 AD3 AD AD2 AD3 AD AD2 AD3 Cap W V.DC TSC Electronics, td. Tel: (3) Fax: (3)

11 % D.F. % D.F. R Multilayer Ceramic Capacitors Dielectric Characteristics NPO/COG C, D.F. vs. Frequency Coefficient C, vs. Voltage Coefficient %D.F Frequency Insulation Resistance vs. Temp DC. Volts Applied C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, Typical TC DF C BX/X7R C. vs. Frequency Coefficient + C, vs. Voltage Coefficient BX X7R -3-4 Insulation Resistance (Ohm-Farads) KHz KHz KHz MHz MHz MHz Frequency Insulation Resistance vs. Temp,, DC. Volts Applied C,D.F. vs. Temperature Coefficient D.F. C -5 C -25 C C 25 C 5 C 75 C C 5 C Z5U/Y5V C. vs. Frequency Coefficient C, vs. Voltage Coefficient Insulation Resistance (Ohm-Farads) KHz KHz KHz MHz MHz MHz Frequency Insulation Resistance vs. Temp. k k DC. Volts Applied C,D.F. vs. Temperature Coefficient CZ5U D.F Z5U CY5V &Y5V TSC Electronics, td. Tel: (3) Fax: (3)

12 Multilayer Ceramic Capacitors Radial-eaded, Epoxy Dipped METAIZED END EECTRODES SODER COATED WIRE EADS SODER CERAMIC DIEECTRIC EPOXY RESIN DIPPING COATED Introduction T.S.C. Axial-eaded Epoxy coated multilayer ceramic chip capacitors are manufactured with modern proven technology exchanged with a U.S. based manufacturer. The process features a high degree of mechanization, operating under precise control while using the highest quality material. A continuous quality assurance program is also maintained to ensure consistent high quality capacitors. T.S.C. capacitors feature superior humidity characteristics, longer life, lower inductance. Features Wide capacitance, T.C., voltage and tolerance range Industry standard sizes Tape and Reel available for auto-insertion Marking standard or to customer specification General Specifications Code Dielectric EIA COG X7R Z5U/Y5V Temperature Characteristics Category (Operating) Temperature Range ±3ppm/ C, C>2 pf +2ppm/ C, C 2pF C to +25 C C±5% maximum over -55 C to +25 C -55 C to +25 C C+22%, -56 maximum over + C to +85 C -25 C to +85 C Measuring Conditions for Capacitance and D.F. MHz, Vrms, C pf KHz, Vrms, C>pF KHz, Vrms KHz,.5 Vrms Dissipation Factor (D.F.) and Tangent of oss Angle (tan ).5% 2.5% 4.% Insulation Resistance (I.R.) after 6 secs charging at rated Voltage 25 C Gohms or, M Ω µf whichever is less Gohms or, M Ω µf whichever is less Gohms or, M Ω µf whichever is less Voltage Proof, 25 C 2.5xRated Voltage 2.5xRated Voltage 2.5xRated Voltage Capacitance Aging =.5% per decade hour =5% per decade hour Tape & Reel Dimensions: in.(mm).25±.5 (6.35±.3).5 (2.7).8±.4 (3±).79±.4.2 (8±.).5).8 (3.) max.492 (2.5).63±.6 (6.±.4).63±.2 (6.±.5).787±.2 (2.±.5) 2.99±.8 (76±2).5±. (2.7±.2).6±.4 (4.±.) 3.4 (34) max.79 (2.).79 (2.) max.59 (.5) max.26±. (.7±.3).65 (42) 2-4 TSC Electronics, td. Tel: (3) Fax: (3)

13 Multilayer Ceramic Capacitors Part Number System ADO COG 472 K H T TYPE AND SIZE TEMPERATURE CHARACTERISTICS COG= ±3ppm X7R = ±5% Z5U = +22, -56% Y5V = +22, -82% CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE J = ±5% K = ±% M = ±2% VOTAGE H = 5VDC T = VDC U = 2VDC PACKING B = Bulk T = Taped & Reeled Type and Size Dimensions Inches (Millimeters) RD5 RD6 RD2 RD2 RD3 T Bulk Package ead ength H H H H H.8 (2.) Max.. Min. (25.4). (2.54) Max.. Min. (25.4). (2.54) Max.. Min. (25.4). (2.54) Max.. Min. (25.4).8 (2.) Max.. Min. (25.4) C A or B A or B S S S S S.±.4 (2.54±.).2±.4 (5.8±.) Size.±.4 (2.54±.).2±.4 (5.8±.).2±.4 (5.8±.) D ead Diameter A=.2±.4(5.±.) B=.3±.4(7.62±.) Style max H max T max S max D RD 5.5" (3.8).5" (3.8)." (2.54)." (2.54).2" (.58) RD 6.5" (3.8).5" (3.8)." (2.54).2" (5.8).2" (.58) RD 2.2" (5.8).2" (5.8).25" (3.8)." (2.54).2" (.58) RD 2.2" (5.8).2" (5.8).25" (3.8).2" (5.8).2" (.58) RD 3.3" (7.62).3" (7.62).5" (3.8).2" (5.8).2" (.58) Marking Capacitance are marked in 3 digits for capacitance above PF, and marked in actual value for capacitance PF and below Capacitance tolerance are marked in code symbol. Temperature Characteristics: C=COG, X=X7R, Z=Z5U, Y=Y5V SIZE Capacitance Tolerance Rated Voltage Temp. Char. RD5, RD6, RD RD2, RD2, RD RD3 TSC Electronics, td. Tel: (3) Fax: (3)

14 Multilayer Ceramic Capacitors Capacitance Range Dielectric Code COG X7R Z5U Z5U Y5V Y5V Size Code RD5 RD6 RD2 RD2 RD3 RD5 RD6 RD2 RD2 RD3 RD5 RD6 RD2 RD2 RD3 Cap W V.DC TSC Electronics, td. Tel: (3) Fax: (3)

15 % D.F. % D.F. R Multilayer Ceramic Capacitors Dielectric Characteristics NPO/COG C, D.F. vs. Frequency Coefficient C, vs. Voltage Coefficient %D.F Frequency Insulation Resistance vs. Temp DC. Volts Applied C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, Typical TC DF C BX/X7R C. vs. Frequency Coefficient + C, vs. Voltage Coefficient BX X7R -3-4 Insulation Resistance (Ohm-Farads) KHz KHz KHz MHz MHz MHz Frequency Insulation Resistance vs. Temp,, DC. Volts Applied C,D.F. vs. Temperature Coefficient D.F. C -5 C -25 C C 25 C 5 C 75 C C 5 C Z5U/Y5V C. vs. Frequency Coefficient C, vs. Voltage Coefficient Insulation Resistance (Ohm-Farads) KHz KHz KHz MHz MHz MHz Frequency Insulation Resistance vs. Temp. k k DC. Volts Applied C,D.F. vs. Temperature Coefficient CZ5U D.F Z5U CY5V &Y5V TSC Electronics, td. Tel: (3) Fax: (3)

16 % D.F. R High Voltage Chip Capacitors NPO & COG Dielectric CERAMIC DIEECTRIC INTERNA EECTRODE TERMINATION Application NPO (COG) dielectric properties suiter for precision circuits, requiring stable dielectric characteristics: * Negligible dependence of capacitance and dissipation factor on time, voltage, and frequency * ow-loss (High Q) * Predictable linear temperature coefficient * No Piezoelectric behavior General Specification Operating temperature range -55 C ~ +25 C Capacitance Range: pf ~.47uF (25 C,.±.2 Vrms at khz) Capacitance Tolerance: ±5pF, ±pf, ±2% Voltage Ratings, 6VDC, VDC, 2VDC, 3VDC Dissipation Factor (+25 C,.±.2 Vrms, khz).% Max Insulation Resistance (+25 C, at 5 VDC), megohms min or, MΩ-µF min, whichever is less Insulation Resistance (+25 C, at 5 VDC), megaohms min or MΩ-µF min, whichever is less Dielectric strength 2% rated voltage for 5 seconds at 5 mamp max current. C, D.F. vs. Frequency Coefficient C, vs. Voltage Coefficient % D.F Frequency DC. Volts Applied Insulation Resistance vs. Temp C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, Typical TC DF C TSC Electronics, td. Tel: (3) Fax: (3)

17 High Voltage Chip Capacitors Part Number System 26 HVN 472 K H T SIZE see chart DIEECTIC COG (NPO) CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE C = +-.25PF D = +-.5PF F = +-% J = +-5% K = +-% M = +-2% VOTAGE 6 = 6VDC 2 = VDC 22 = 2VDC 32 = 3VDC PACKING X = Bulk T=Tapedon Reel M = Magazine SIZES AND VAUES AVAIABE : STYE * (mm, in) *W (mm, in) T Max(mm, in) EB Min(mm, in) CAP.(PF) ,,2,5,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2 2, Tol W 2 EB T. Max 3 * Tolerance +-.", 7% Whichever is greater TSC Electronics, td. Tel: (3) Fax: (3)

18 High Voltage Chip Capacitors X7R & BX Dielectric CERAMIC DIEECTRIC INTERNA EECTRODE TERMINATION Application X7R & BX dielectric properties; suited for by-pass and coupling purposes, filtering, frequency discrimination, DC blockage, and as voltage transient suppression elements. General Specification Operating temperature range -55 C ~ +25 C Capacitance Range: pf ~.56uF (25 c,.±.2 Vrms, khz) Capacitance Tolerance: ±5%, ±%, ±2% Voltage Ratings, 6VDC, VDC, 5VDC, 2VDC, 3VDC Dissipation Factor (+25 C,.±.2 Vrms, khz) 2.5% Max Insulation Resistance (+25 C, at 5 VDC), megohms min or MW-µF min, whichever is less Insulation Resistance (+25 C, at 5 VDC), megaohms min or MW-µF min, whichever is less Dielectric strength 2% rated voltage for 5 seconds at 5 mamp max current. C. vs. Frequency Coefficient + C, vs. Voltage Coefficient BX X7R -3-4 KHz KHz KHz MHz MHz MHz Frequency DC. Volts Applied Insulation Resistance vs. Temp C,D.F. vs. Temperature Coefficient Insulation Resistance (Ohm-Farads),, C - -2 D.F. -5 C -25 C C 25 C 5 C 75 C C 5 C TSC Electronics, td. Tel: (3) Fax: (3)

19 High Voltage Chip Capacitors Part Number System 26 HVX 472 K H T SIZE see chart DIEECTIC BX & X7R CAPACITANCE st two digits are signifi. third digit denotes number of zeros to follow 472 = 47PF R denotes decimal 2R7 = 2.7PF TOERANCE J = +/-5% K = +/-% M = +/-2% VOTAGE 6 = 6VDC 2 = VDC 52 = 5VDC 22 = 2VDC 32 = 3VDC PACKING X = Bulk T = Taped on Reel M = Magazine EB T. Max W SIZES AND VAUES AVAIABE : STYE * (mm, in) *W (mm, in) T Max(mm, in) EB Min(mm, in) CAP.(PF) ,,2,5,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2, 2, 5, 8, 22, 27, 33, 39, 47, 56, 68, 82, 22, Tol * Tolerance +-.", 7% Whichever is greater TSC Electronics, td. Tel: (3) Fax: (3)

20 Multilayer Ceramic Chip Capacitor Performance and Test Conditions Criteria Class I Class II Test Conditions Operating temperature range COG: -55 to +25 C X7R: -55 to +25 C (-67 to 257 F) (-67 to +257 F) Z5U: to 85 C (5 to 85 F) Y5V: -3 to +85 C (-22 to +85 F) Conforms to (EIA RS98) Exterior appearance and structure No abnormal exterior appearance and structural dimensions are based on individual standards. Micrometer Withstanding voltage No dielectric breakdown nor mechanical breakdown. Class I: Class II: 3% of rated voltage, to 5 sec. 25% of rated voltage, to 5 sec. Insulation resistance Minimum insulation resistance: MΩor 5M Ω µf, whichever is smaller. 6Vdc ratings: MΩor M Ω µf, whichever is smaller. Rated voltage shall be applied, Measurement is taken after one minute. 6Vdc rating: Measurement voltage is 25Vdc. Capacitance Q or dielectric dissipation factor (tan δ) Within specified tolerance. Q Temperature X7R Y5V Z5U 3pF min. Q characteristic less than 3pF Q 4+2 C (C is nominal capacitance) Dielectric dissipation max. max. max. factor (tan δ) pf max. MHz±2%, 5Vrms max. pf min. khz±%,.±.2vrms. Capacitance temperature coefficient Temperature Temperature Temperature Capacitance coefficient coefficient characteristics change symbol symbol (%) COG ± 3 X7R ±5 Y5V +22, -82 Z5U +22, +56 Solderability Solder to cover more than 75% of the terminal surface. And no exposure of ceramic and electrodes on plane A on both sides. Solder 75% min. A Solder temperature: 235±5 C (455±9 C) Dipping: to 5mm depth (.394 to.59 inches) Dip time: 2±.5 sec. Solder: H63A (eutectic solder) Flux: Rosin Solder heat resistance Exterior Capacitance change Q or dielectric dissipation factor (tan δ) No abnormalities ±2.5% or ±.25pF, Temperature X7R Y5V Z5U whichever larger characteristic Capacitance ±7.5 ±2 ±2 change (%) Q 3pF min Q Temperature X7R Y5V Z5U less than 3pF Q 4+2 C characteristic (C is nominal capacitance.) Dielectric dissipation max. max. max. factor (tan δ) Preheat: 5± C (32 to 5 C) to 2 minutes Dip: Solder temperature 26±5 C (5±9 C) Dip time: 5±.5 sec. Solder: H63A (eutectic solder) Flux: Rosin Cooling: Natural heat dissipation for 24±2 hours, Class I 48±4 hours, Class II Measurement: Measure at room temperature. Insulation resistance Minimum insulation resistance: MΩor 5M Ω µf, whichever is smaller. 6Vdc ratings: MΩor M Ω µf product, whichever is smaller. Withstanding voltage No dielectric breakdown or mechanical breakdown TSC Electronics, td. Tel: (3) Fax: (3)

21 Multilayer Ceramic Chip Capacitor Performance and Test Conditions Criteria Class I Class II Test Conditions Robustness of terminations No indications of pealing of materialized terminations. 5N PC Board Capacitor 5N of force to be applied from the side for ± seconds. Temperature cycle Exterior Capacitance change Q or dielectric dissipation factor (tan δ) Insulation resistance No mechanical damage. ±2.5% or ±.25pF, Temperature X7R Y5V Z5U whichever larger characteristic Capacitance ±7.5 ±2 ±2 change (%) Q 3pF min Q Temperature X7R Y5V Z5U less than 3pF Q 4+2 C characteristic (C is nominal capacitance.) Dielectric dissipation max. max. max. factor (tan δ) Minimum insulation resistance: MΩor M Ω µf, whichever is smaller. 6Vdc ratings: MΩor M Ω µf product, whichever is smaller. Subject the capacitor to the four steps in order as specified below. Repeat the procedure five times. Then leave the capacitor at room temperature and humidity for 48±4 hours before measuring. step step 2 step 3 step 4 Min. operating temp. ±3 C(5.4 F) 3±3 minutes room temperature 2~5 minutes Max. operating temp. ±2 C(3.6 F) 3±3 minutes room temperature 2~5 minutes Withstanding voltage No dielectric breakdown or mechanical breakdown. High temperature resistance Exterior Capacitance Change No mechanical damage. ±3% or ±.3pF, Temperature X7R Y5V Z5U whichever is larger. characteristic Capacitance ±5 ±3 ±3 change (%) Temperature: 85±3 C (85±5.4 F) Voltage: 2% of rated voltage Time: hours Charging current: 5mA max. Q or dielectric dissipation factor (tan d) Q Temperature X7R Y5V Z5U 3pF min. Q 35 characteristic pf to 3pF excl. Q /2 C Dielectric less than pf Q 2± C dissipation max. max. max. (C is nominal capacitance.) factor (tan δ) Isulation resistance Minimum insulation resistance: MΩor 5M Ω µf, whichever is smaller. 6Vdc ratings: MΩor 5M Ω µf product, whichever is smaller. Humidity resistance Exterior Capacitance change No mechanical damage. ±7.5% or ±.75pF, Temperature X7R Y5V Z5U whichever is larger. characteristic Capacitance ±2.5 ±3 ±3 change (%) Temperature: 4±2 C (4±36 C) Relative humidity: 9 to 95% RH Voltage: rated voltage Time: hours Charging current: 5mA max. Q or dielectric dissipation factor (tan d) Q Temperature X7R Y5V Z5U 3pF min. Q 2 characteristic less than 3pF Q +/3 C (C is nominal capacitance.) Dielectric dissipation max. max. max. factor (tan δ) Insulation resistance Minimum insulation resistance: 5MΩor 25M Ω µf, whichever is smaller. 6Vdc ratings: 5MΩor 5 Ω µf, whichever is smaller. TSC Electronics, td. Tel: (3) Fax: (3)

22 Multilayer Ceramic Chip Capacitor Tape Dimensions 3.5 +/-.5 [.38 +/-.2].75 +/-. [.69 +/-.4] 4 +/-. [.57 +/-.4] 2 +/-.5 [.79 +/-.2].5 +., - [ , -] +/-.3 max. [.2] 8 +/-.3 [.35 +/-.2] B +/-. [.4] 4 +/-. [.57 +/-.4] A +/-. [.4]. +/-.5 [.43 +/-.2] +/- 2. max. [.79] Fig. TAPE DIMENSIONS Size Code A B Fig ±.2 [.43±.8].9±.2 [.59±.8] 2.3±.2 [.9±.8] 3.5±.2 [.38±.8] Blank Chips 4 [5.748] min. Blank eader 2 2.9±.2 [.4±.8] 3.6±.2 [.42±.8] 4 [.575] min. 2 [.787] Drawing direction The pitch holes shift only within +/-.3mm [.2 inches] for cumulative pitches ±.2 [.42±.6] 4.9±.5 [.93±.6] ±.2 [.23±.8] 6.9±.2 [.272±.6] Dimensions in mm [inches] /-.5 [.27 +/-.2].75 +/-. [.69 +/-.4] 4 +/-. [.57 +/-.4] 2 +/-.5 [.79 +/-.2].5 +., - [ , -] +/-.3 max. [.2] 2 +.2, - [ , -] B +/-. [.4] 8 +/-. [.35 +/-.4] A +/-. [.4].6 +/-. [.63 +/-.4] +/- 2. max. [.79] Fig TSC Electronics, td. Tel: (3) Fax: (3)