2011 New Products of MLCC

Transcription

1 2011 New Products of MLCC 1

2 SAFETY CERTIFIED CHIP CAPACITOR. The The safety safety capacitors capacitors offered offered by by are are designed designed for for surge surge or or lightning lightning immunity immunity in in modem, modem, facsimile facsimile other other equipment. equipment. The The capacitors capacitors of of series series SA SA SB SB are are class class X2/Y3 X2/Y3 class class X1/Y2 X1/Y2 compliant compliant respectively. respectively. There There are are three three case case size size X7R X7R COG COG dielectric dielectric materials materials available available upon upon request. request. These These capacitors capacitors are are surface surface mount mount ready ready with with nickel-barrier nickel-barrier tin tin terminations terminations tape tape reel reel packaging. packaging. Additional Additional information information on on safety safety certified certified capacitors capacitors may may be be found found below. below. 2

3 Standard Recognition Product Code Safety Rating Standards Case Size Capacitance Range FH X2Y3 SEMKO TUV/UL EN132400:1994+A2+A 3+A4;IEC nd edition:1993/a1:1995 (subclassy3 plus 2.5KV impulse/en60950) R0 ~ 102 3R0 ~ ~ 272 FK X1Y2 SEMKO R0 ~ 101 TUV/UL EN132400:1994+A2+A 3+A4;IEC nd edition:1993/a1: R0 ~ ~ ~ 222 3

4 Electrical Characteristics No. Item Specification Test Condition 1 Temperature Coefficient COG X7R 0±30ppm/ 30ppm/ C, C>20pF ppm/ ppm/ C, C 20pF Capacitance change within ±15% Temperature range -55 C~+125 C 2 Capacitance Dissipation Factor COG X7R within specified tolerance Df 0.1%, C 30pF;Df C 100%/(400+20C),C<30pF within specified tolerance 2.5%max Measured at 1±0.2MHz,1±0.2V0.2V rms Measured at 1±0.2KHz,1±0.2V0.2V rms 3 Insulation Resistance IR 100G,or RC 1000,whichever is less Charge at 500Vdc after 1 minutes 4 Withstanding Voltage No failure, breakdown or flashover 1.5KVAC, 1 min 4 Note: The electrical characteristics of capacitance, DF, IR, and withstanding voltage Note: will be guaranteed by 100% sorting in production. ISO 9001:2000 Certified

5 FH FK Series Safety Capacitor Capacitance Range NPO Characteristic Size SAFETY RATING Standard X1Y2 SEMKO 1808 X2Y3 SEMKO X1Y2 TUV/UL X2Y3 TUV/UL 2211 X1Y2 TUV/UL X7R Characteristic 2R0 3R9 4R7 5R0 6R8 8R Size SAFETY RATING Standard X1Y2 SEMKO 1808 X2Y3 SEMKO 1812 X2Y3 TUV/UL 1812 X1Y2 TUV/UL 2211 X1Y2 TUV/UL 2220 X1Y2 TUV/UL

6 FP Series MLCC An ultimate MLCC to solve risk of bending crack Features Wide capacitance range in a given size. Application High flexure stress circuit board. High performance to withstand 5mm bending test guarantee. Reduction in PCB bend failure. Lead free terminations. Good adhesion of termination. 6 RoHS compliant

7 FP Series MLCC An ultimate MLCC to solve risk of bending crack Outline Size L W T(max) E(min) ± ± ± ± ± / ± / ± 2.50 ± ± ± ± ± ± ± ± ± ± ± Unit: mm 7

8 FP Series MLCC An ultimate MLCC to solve risk of bending crack How to order FP 06 X 103 K 631 E C G Product Family Chip Size 03: : : : : : : : :2225 Dielectric N; C0G X: X7R Capacitance Two significant digits followed by no. of zeros. And R is in place of decimal point. R47=0.47pF 0R5=0.5pF 1R0=1.0pF 100=10x100 =10pF 103=10 x 1000 = 10nF Tolerance J : +/- 5% K : +/-10% M : +/- 10% Rated Voltage Two significant digits followed by no. of zeros. And R is in place of decimal point. 100=10 VDC 160=16 VDC 250=25 VDC 500=50 VDC 101=100 VDC 631=630 VDC 102= 1000 VDC Packaging P: Cardboard E: Embossed B: Bulk Thickness B: /-0.10mm 0.10mm C:1.25 +/- 0.10mm D:1.40 +/- 0.15mm E:1.60 +/- 0.20mm F:2.0 +/- 0.20mm G:2.5 +/- 0.20mm V:2.8 +/- 0.20mm Special code 8

9 FP Series MLCC An ultimate MLCC to solve risk of bending crack Specifications: 9 Case Size: 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225 Capacitance Range: Maximum 6.8µF Temperature Curve of Capacitance: X7R, ±15% capacitance -55 ~ +125 Dissipation Factor: Maximum 2.5% at 1KHz, 1Vrms (3.0% for µF, µF, µF) Insulation Resistance: 10GΩ or RxC 500MΩ µf Capacitance Tolerance: J: ±5%, K: ±10%, M: ±20% Dielectric Withstanding Voltage: 50V ~ 100V 2.5 times of rated voltage 200V/250V 2 times of rated voltage 500V 1.5 times of rated voltage > 500V 1.2 times of rated voltage

10 FP Series MLCC An ultimate MLCC to solve risk of bending crack -Typical Bending Cracks of MLCC MLCC ceramic body is consisted of rigidity material. It will be suffered compressive and tensional stress when the carried board is bended. If the suffered stress is over ceramic body strength, the bending crack is occurred. Therefore, the bending crack will be only occurred after soldering process. 10 Force Force

11 FP Series MLCC An ultimate MLCC to solve risk of bending crack -Comparison of Bending Test Result Failure Ratio (%) 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% Resistance to Substrate Bending 0805, X7R, 22nF, 250V (MA sereis) 0805, X7R, 22nF, 250V (FP series) 1206, X7R, 100nF, 100V (MA sereis) 1206, X7R, 100nF, 100V (FP series) 0% Bending (mm) Judgment:ΔC/C > ±10%