32 M s - 7 4 & 10 4 s Effective as of 1-18 MS-881 Shown with Standard Equipment The M Series of s are the smallest units in the line-up. These units fit a niche market of seedbed preparation for the smaller operations with low horsepower tractors. M Series units offer manual tooth control and hydraulic raise and lower. Choice of c-tine or s-tine cultivator teeth and choice of Notched or Crowfoot wheels allow the M Series to be equipped to fit specific needs. Height - 3 0 4 Roller Axles Single Wheels Length - 16 2 Nominal Teeth Spacing - 6 (2) 7.60 x 15 6 Ply Tires 16.25 Notched Gray Iron Wheels Maximum Tooth Depth of Operation - 4 LED Warning Lights on 10 4 s 16.5 Crowfoot Gray Iron Wheels Manually Operated Tooth Control Safety Chain Kit Rear Scrapers - Standard on Notched Rollers S-Tine s: 1 3/8 Points Standard SMV Emblem Travel Link Hydraulic Cylinder & Hose Kit Powder Coat Paint Horsepower Requirements: 6 to 8 HP per Foot 7 4 MODEL WITH CONVENTIONAL C TEETH of Teeth Set-Up Time: 6 Hours M-881 7 4 7 10 Notched Notched 13 2,934 lbs. $ 12,866.00 MC-881 7 4 7 10 Crowfoot Notched 13 2,824 lbs. 12,926.00 MCC-881 7 4 7 10 Crowfoot oo Crowfoot oot 13 2,739 lbs. 12,781.00 7 4 MODEL WITH 10 MM S-TINE TEETH WITH CHOICE CE OF 2J149 OR 2J150 POINTS MS-881 7 4 7 10 Notched Notched 13 2,944 lbs. 12,790.00 Call l for Availability abi MCS-881 7 4 7 10 Crowfoot Notched 13 2,814 lbs. 12,885.00 MCCS-881 7 4 7 10 Crowfoot Crowfoot 13 2,724 lbs. 12,850.00 10 4 MODEL WITH CONVENTIONAL C TEETH M-1241 10 4 11 0 Notched Notched 19 4,017 lbs. 16,605.00 MC-1241 10 4 11 0 Crowfoot oot Notched 19 3,872 lbs. 16,681.00 MCC-1241 10 4 11 0 Crowfoot Crowfoot 19 3,612 lbs. 16,529.00 10 4 MODEL WITH 10 MM S-TINE TEETH WITH CHOICE OF 2J149 OR 2J150 POINTS MS-1241 10 4 11 0 Notched Notched 19 3,998 lbs. 16,485.00 MCS-1241 10 4 11 0 Crowfoot Notched 19 3,853 lbs. 16,655.00 MCCS-1241 10 4 11 0 Crowfoot Crowfoot 19 3,593 lbs. 16,594.00 ACCESSORIES & OPTIONAL EQUIPMENT 2J149 1 3/8 Heavy-Duty Reversible S-Tine Point with Hardware* 1.0 lb. In Base 2J150 2 3/4 Shovel with Hardware for S-Tines* 1.0 lb. ADD $ 1.00 Each 4J635 Land Leveler Kit for 7 4 s 57.0 lbs. 182.00 7C189 Land Leveler Kit for 10 4 s 67.0 lbs. 203.00 4J625 Front Scraper Kit for 7 4 s (For Notched Rollers) 54.0 lbs. 498.00 5D744 Front Scraper Kit for 10 4 s (For Notched Rollers) 78.0 lbs. 762.00 * 2J149-1 3/8 Heavy-Duty Reversible Points are Standard Equipment on s Equipped with S-Tines and are Included in the Base of the Machine; if 2J150-2 3/4 Shovels are Desired, Add $1.00 Each. Please Specify 2J149 or 2J150 when placing order. SUGGESTED RETAIL LIST PRICES EFFECTIVE JANUARY 1, 2018 - SPECIFICATIONS AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE s and Specifications may be subject to change without notice. s do not include shipping or setup.
s Effective as of 1-18 ML s - 12 6, 13 10, 15 2 & 18 9 33 MCL-2253 Shown with Standard Equipment The ML Series features a larger frame and 20 ductile iron roller wheels. The larger diameter rollers firm and level the seedbed to ensure uniform seed germination and improve planter operation. widths of the ML Series fit into mid-size operations. Choice of wheels and cultivator teeth allow the ML to be custom configured to meet the needs of the producer. Height - 3 8 4 Roller Axles Dual Wheels Length - 19 10 Nominal Teeth Spacing - 6 (4) 9.5L x 15 6 Ply Tires 20 Notched Ductile Iron Wheels Maximum Tooth Depth of Operation - 6 Safety Warning Lights & SMV Emblem 20 Crowfoot Ductile Iron Wheels Independent Hydraulic Tooth Control Safety Chain Kit Rear Scrapers - Standard on Notched Rollers S-Tine s: 1 3/8 Points Standard Powder Coat Paint Horsepower Requirements: 6 to 8 HP per Foot of Teeth Set-Up Time: 8 Hours CONVENTIONAL C TEETH ML-1483 12 6 13 6 Notched Notched 23 5,390 lbs. $ 23,321.00 ML-1643 13 10 14 5 Notched Notched 27 5,720 lbs. 24,338.00 ML-1803 15 2 15 9 Notched Notched 29 6,036 lbs. 25,285.00 ML-2253 18 9 19 6 Notched Notched 35 7,201 lbs. 29,572.00 MCL-1483 12 6 13 6 Crowfoot Notched 23 5,348 lbs. 23,254.00 MCL-1643 13 10 14 5 Crowfoot Notched 27 5,730 lbs. 24,246.00 MCL-1803 15 2 15 9 Crowfoot Notched 29 6,014 lbs. 25,267.00 MCL-2253 18 9 19 6 Crowfoot Notched 35 7,138 lbs. 29,406.00 MLC-1483 12 6 13 6 Notched Crowfoot 23 5,251 lbs. 22,874.00 MLC-1643 13 10 14 5 Notched Crowfoot 27 5,543 lbs. 23,786.00 MLC-1803 15 2 15 9 Notched Crowfoot 29 5,860 lbs. 24,738.00 MLC-2253 18 9 19 6 Notched Crowfoot 35 6,988 lbs. 28,862.00 MCC-1483 12 6 13 6 Crowfoot Crowfoot 23 5,209 lbs. 22,909.00 MCC-1643 13 10 14 5 Crowfoot Crowfoot 27 5,472 lbs. 23,707.00 MCC-1803 15 2 15 9 Crowfoot Crowfoot 29 5,835 lbs. 24,721.00 MCC-2253 18 9 19 6 Crowfoot Crowfoot 35 6,924 lbs. 28,716.00 12 MM S-TINE TEETH WITH CHOICE OF 2J149 OR 2J150 POINTS MLS-1483 12 6 13 6 Notched Notched 23 5,280 lbs. 23,414.00 MLS-1643 13 10 14 5 Notched Notched 27 5,591 lbs. 24,430.00 MLS-1803 15 2 15 9 Notched Notched 29 5,901 lbs. 25,377.00 MLS-2253 18 9 19 6 Notched Notched 35 7,035 lbs. 29,663.00 MCLS-1483 12 6 13 6 Crowfoot Notched 23 5,238 lbs. 23,347.00 MCLS-1643 13 10 14 5 Crowfoot Notched 27 5,520 lbs. 24,340.00 MCLS-1803 15 2 15 9 Crowfoot Notched 29 5,876 lbs. 25,360.00 MCLS-2253 18 9 19 6 Crowfoot Notched 35 6,972 lbs. 29,498.00 MLCS-1483 12 6 13 6 Notched Crowfoot 23 5,141 lbs. 22,966.00 MLCS-1643 13 10 14 5 Notched Crowfoot 27 5,414 lbs. 23,878.00 MLCS-1803 15 2 15 9 Notched Crowfoot 29 5,722 lbs. 24,830.00 MLCS-2253 18 9 19 6 Notched Crowfoot 35 6,822 lbs. 28,954.00 MCCS-1483 12 6 13 6 Crowfoot Crowfoot 23 5,099 lbs. 23,001.00 MCCS-1643 13 10 14 5 Crowfoot Crowfoot 27 5,343 lbs. 23,800.00 MCCS-1803 15 2 15 9 Crowfoot Crowfoot 29 5,697 lbs. 24,813.00 MCCS-2253 18 9 19 6 Crowfoot Crowfoot 35 6,758 lbs. 28,810.00 Ductile Iron Wheels Carry Five Year Limited Warranty Against Breakage. Accessories & Options on Page 35 SUGGESTED RETAIL LIST PRICES EFFECTIVE JANUARY 1, 2018 - SPECIFICATIONS AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE s and Specifications may be subject to change without notice. s do not include shipping or setup.
34 WL s - 21 8 & 25 s Effective as of 1-18 WCLS-3003 Shown with Standard Equipment The WL Series of s offers larger model sizes that can cover more acres more efficiently. These models are flat folding units for a very manageable transport width and height. Choice of Notched or Crowfoot Ductile Iron wheels and the choice of s-tines or c-tines allow the WL Series to be customized to meet the needs of any operation. Height - 6 2 4 Roller Axles S-Tine s: 1 3/8 Points Standard Length - 19 10 Nominal Teeth Spacing - 6 Dual Wheels 20 Notched Ductile Iron Wheels Maximum Tooth Depth of Operation - 6 (4) 11L x 15 8 Ply Tires 20 Crowfoot Ductile Iron Wheels Independent Hydraulic Tooth Control Safety Warning Lights & SMV Emblem Rear Scrapers - Standard on Notched Rollers Cylinders and Hoses Safety Chain Kit Powder Coat Paint Horsepower Requirements: 6 to 8 HP per Foot CONVENTIONAL C TEETH Set-Up Time: 14 to 16 Hours of Teeth WL-2603 21 8 13 11 Notched Notched 41 9,783 lbs. $ 46,440.00 WL-3003 25 0 13 11 Notched Notched 47 10,215 lbs. 49,001.00 WLC-2603 21 8 13 11 Notched Crowfoot 41 9,495 lbs. 45,579.00 WLC-3003 25 0 13 11 Notched Crowfoot 47 9,943 lbs. 48,039.00 WCL-2603 21 8 13 11 Crowfoot Notched 41 9,680 lbs. 46,291.00 WCL-3003 25 0 13 11 Crowfoot Notched 47 10,153 lbs. 48,869.00 WCC-2603 21 8 13 11 Crowfoot Crowfoot 41 9,392 lbs. 45,428.00 WCC-3003 25 0 13 11 Crowfoot Crowfoot 47 9,881 lbs. 47,976.00 12 MM S-TINE TEETH WITH CHOICE OF 2J149 OR 2J150 POINTS WLS-2603 21 8 13 11 Notched Notched 41 9,594 lbs. 45,702.00 WLS-3003 25 0 13 11 Notched Notched 47 10,026 lbs. 48,098.00 WLCS-2603 21 8 13 11 Notched Crowfoot 41 9,306 lbs. 44,840.00 WLCS-3003 25 0 13 11 Notched Crowfoot 47 9,754 lbs. 47,252.00 WCLS-2603 21 8 13 11 Crowfoot Notched 41 9,491 lbs. 45,748.00 WCLS-3003 25 0 13 11 Crowfoot Notched 47 9,964 lbs. 48,203.00 WCCS-2603 21 8 13 11 Crowfoot Crowfoot 41 9,203 lbs. 45,042.00 WCCS-3003 25 0 13 11 Crowfoot Crowfoot 47 9,692 lbs. 48,042.00 Ductile Iron Wheels Carry Five Year Limited Warranty Against Breakage. s and Specifications may be subject to change without notice. s do not include shipping or setup. Accessories & Options on Page 35
s Effective as of 1-18 PULVI-MULCHER/SEEDBED MAKER Accessories and Optional Equipment 35 For ML s on Page 33 POINTS 2J149 1 3/8 Heavy-Duty Reversible S-Tine Point with Hardware* 1.0 lb. In Base 2J150 2 3/4 Shovel with Hardware for S-Tines* 1.0 lb. ADD $ 1.00 Each OPTIONAL EQUIPMENT 1K083 Front Scraper Kit for 12 6 s (For Notched Rollers) 108.0 lbs. 567.00 1K084 Front Scraper Kit for 13 10 s (For Notched Rollers) 118.0 lbs. 610.00 1K085 Front Scraper Kit for 15 2 s (For Notched Rollers) 129.0 lbs. 739.00 1K974 Front Scraper Kit for 18 9 s (For Notched Rollers) 159.0 lbs. 777.00 8J141 Land Leveler Kit for 12 6 s 105.0 lbs. 488.00 8J140 Land Leveler Kit for 13 10 s 127.0 lbs. 573.00 8J139 Land Leveler Kit for 15 2 s 134.0 lbs. 594.00 1K973 Land Leveler Kit for 18 9 s 169.0 lbs. 754.00 3K692 V-Leveler Kit for 12 6 s 196.0 lbs. 1,132.00 3K691 V-Leveler Kit for 13 10 & 15 2 s 221.0 lbs. 1,211.00 3K690 V-Leveler Kit for 18 9 s 240.0 lbs. 1,235.00 8J127 Rear Hitch 74.0 lbs. 303.00 For WL s on Page 34 POINTS 2J149 1 3/8 Heavy-Duty Reversible S-Tine Point with Hardware* 1.0 lb. In Base 2J150 2 3/4 Shovel with Hardware for S-Tines* 1.0 lb. ADD $ 1.00 Each OPTIONAL EQUIPMENT 1K086 Front Scraper Kit for 21 8 s (For Notched Rollers) 196.0 lbs. 1,005.00 1K087 Front Scraper Kit for 25 s (For Notched Rollers) 222.0 lbs. 1,116.00 8J702 Land Leveler Kit for 21 8 s 204.0 lbs. 925.00 8J703 Land Leveler Kit for 25 s 215.0 lbs. 1,024.00 177536 V-Leveler Kit for 21 8 s 343.0 lbs. 1,810.00 177537 V-Leveler Kit for 25 s 354.0 lbs. 1,852.00 8J709 Rear Hitch for 21 8 and 25 s 76.0 lbs. 376.00 9K446 Hydraulic Conversion Kit For Independent Wing Control 16.0 lbs. 238.00 202528 C-Tooth to S-Tine Conversion Kit for 21 8 s 489.0 lbs. 4,197.00 202529 C-Tooth to S-Tine Conversion Kit for 25 s 541.0 lbs. 4,597.00 202530 S-Tine to C-Tooth Conversion Kit for 21 8 s 603.0 lbs. 4,909.00 202531 S-Tine to C-Tooth Conversion Kit for 25 s 671.0 lbs. 5,652.00 * 2J149-1 3/8 Heavy-Duty Reversible Points are Standard Equipment on s Equipped with S-Tines and are Included in the Base of the Machine; if 2J150-2 3/4 Shovels are Desired, Add $1.00 Each. Please Specify 2J149 or 2J150 when placing order. s and Specifications may be subject to change without notice. s do not include shipping or setup.
36 WL s - 30 s Effective as of 1-18 WL-360 Shown with Standard Equipment With a working width of 30 feet and an operating weight in excess of 13,000 lbs., these WL Pulvi- Mulcher models provide the ultimate in high capacity seedbed preparation. These units are flat folding for a very manageable transport width and height. Choice of Notched or Crowfoot Ductile Iron wheels and choice of s-tines or c-tines allow these machines to be set up to match differing soil types. Height - 6 4 4 Roller Axles Dual Wheels Length - 19 10 Nominal Teeth Spacing - 6 (4) 12.5L x 16 12 Ply Tires 20 Notched Ductile Iron Wheels Maximum Tooth Depth of Operation - 6 Safety Warning Lights & SMV Emblem 20 Crowfoot Ductile Iron Wheels Independent Hydraulic Tooth Control Safety Chain Kit Rear Scrapers - Standard on Notched Rollers S-Tine s: 1 3/8 Points Standard Powder Coat Paint Horsepower Requirements: 6 to 8 HP per Foot CONVENTIONAL C TEETH of Teeth Set-Up Time: 20 Hours WL-360 30 16 9 Notched Notched 59 13,718 lbs. $ 60,516.00 WLC-360 30 16 9 Notched Crowfoot 59 13,546 lbs. 59,436.00 WCL-360 30 16 9 Crowfoot Notched 59 13,774 lbs. 60,492.00 WCC-360 30 16 9 Crowfoot Crowfoot 59 13,602 lbs. 59,412.00 12 MM S-TINE TEETH WITH CHOICE OF 2J149 OR 2J150 POINTS WLS-360 30 16 9 Notched Notched 59 13,272 lbs. 60,606.00 WLCS-360 30 16 9 Notched Crowfoot 59 13,100 lbs. 59,526.00 WCLS-360 30 16 9 Crowfoot Notched 59 13,328 lbs. 60,584.00 WCCS-360 30 16 9 Crowfoot Crowfoot 59 13,156 lbs. 59,504.00 Ductile Iron Wheels Carry Five Year Limited Warranty Against Breakage. ACCESSORIES & OPTIONAL EQUIPMENT 2J149 1 3/8 Heavy-Duty Reversible S-Tine Point with Hardware* 1.0 lb. In Base 2J150 2 3/4 Shovel with Hardware for S-Tines* 1.0 lb. ADD $ 1.00 Each 3K028 S-Tine Shank, Clamp & Hardware 9.0 lbs. 53.00 9J619 Front Scraper Kit for 30 s (For Notched Rollers) 273.0 lbs. 1,376.00 9J614 Land Leveler Kit for 30 s 383.0 lbs. 1,439.00 177563 V-Leveler Kit for 30 s 450.0 lbs. 1,962.00 9J545 Rear Hitch Kit 161.0 lbs. 765.00 * 2J149-1 3/8 Heavy-Duty Reversible Points are Standard Equipment on s Equipped with S-Tines and are Included in the Base of the Machine; if 2J150-2 3/4 Shovels are Desired, Add $1.00 Each. Please Specify 2J149 or 2J150 when placing order. SUGGESTED RETAIL LIST PRICES EFFECTIVE JANUARY 1, 2018 - SPECIFICATIONS AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE s and Specifications may be subject to change without notice. s do not include shipping or setup.
s Effective as of 1-18 3620 s - 21 37 WL-3620-21 Shown with Standard Equipment The 3620 Series, a two-section folding unit, features taller and stronger two-piece s-tine shanks with additional clearance for improved residue flow through the machine. 8 roller axles with heavy-duty bearings improve reliability and reduce down time. The 21 model utilizes a hydraulic down pressure system for even machine weight distribution across the width of the machine. Choice of Notched, Crowfoot or Optimizer Ductile Iron wheels allow machines to be matched to varying soil types. Height - 13 4 Maximum Shank Operating Depth - 5 Dual Wheels - 12 3 3 Rows of Shanks - 18 Between Shanks (4) 12.5Lx15 FI Tires Overall Machine Length - 31 3 Minimum of 24 Between Rows of Shanks Rear Scrapers - Standard on Notched Rollers 20 Notched Ductile Iron Wheels Heavy-Duty Two-Piece S-Tine Shank (1 3/4 x 5/8 ) 2 Row Coil Tine Harrow in Front of 20 Crowfoot Ductile Iron Wheels 2 Reversible Points Cat. II. III, IV Hitch 20 Optimizer Ductile Iron Wheels 25 Under Frame Clearance LED Warning Lights & SMV Emblem 8 Roller Axles Hitch Floats 10 Degrees Up, 35 Degrees Down Safety Chain Kit 61 mm Heavy-Duty Bearings Wings Float 5 Degrees Down Powder Coat Paint Nominal Shank Spacing - 6 Independent Hydraulic Tooth Depth Control Horsepower Requirements: 9 to 10 HP per Foot Set-Up Time: 32 to 38 Hours of Shanks WL-3620-21 21 12 3 Notched Notched 42 19,386 lbs. $ 66,043.00 WLC-3620-21 21 12 3 Notched Crowfoot 42 18,911 lbs. 66,007.00 WCL-3620-21 21 12 3 Crowfoot Notched 42 19,122 lbs. 66,878.00 WCC-3620-21 21 12 3 Crowfoot Crowfoot 42 18,647 lbs. 66,843.00 WLO-3620-21 21 12 3 Notched Optimizer 42 19,672 lbs. 66,000.00 WOL-3620-21 21 12 3 Optimizer Notched 42 19,870 lbs. 66,954.00 WOO-3620-21 21 12 3 Optimizer Optimizer 42 20,155 lbs. 66,993.00 Ductile Iron Wheels Carry Five Year Limited Warranty Against Breakage. ACCESSORIES & OPTIONAL EQUIPMENT 185120 2 Reversible Point with Hardware 2.0 lbs. In Base 181331 Two-Piece S-Tine Shank Assembly, Clamp & Hardware (Less Point) 26.0 lbs. $ 130.00 156949 Single Lip Cat. V Hitch* 44.0 lbs. 177.00 203737 Front Scraper Kit for 21 s (For Notched Rollers) 324.0 lbs. 1,054.00 203736 V-Leveler Kit for 21 s 382.0 lbs. 1,724.00 203738 Rear Hitch Kit 477.0 lbs. 2,061.00 * Please specify which hitch is needed when placing order. Cat. II, III or IV are included in the base price of the machine, see above for additional cost if Cat. V hitch is needed. s and Specifications may be subject to change without notice. s do not include shipping or setup.
38 3630 s - 30 & 36 6 s Effective as of 1-18 WL-3630-36 Shown with Optional V-Leveler Kit The 3630 Series features taller and stronger two-piece s-tine shanks with additional clearance for improved residue flow through the machine. 8 roller axles with heavy-duty bearings improve reliability and reduce down time. The 30 model is 80% heavier than the popular WL360 for more clod crushing power. Choice of Notched, Crowfoot or Optimizer Ductile Iron wheels allow these machines to be set-up to match varying soil conditions. Height - 12 10 Nominal Shank Spacing - 6 Independent Hydraulic Tooth Depth Control - 19 Maximum Shank Operating Depth - 5 Dual Wheels Center Section - 17 6 3 Rows of Shanks - 18 Between Shanks (4) 380/55RX16.5 Tires Overall Machine Length - 26 Minimum of 24 Between Rows of Shanks Rear Scrapers - Standard on Notched Rollers 20 Notched Ductile Iron Wheels Heavy-Duty Two-Piece S-Tine Shank (1 3/4 x 5/8 ) Hydraulic Leveling Bar in Front of 20 Crowfoot Ductile Iron Wheels 2 Reversible Points Cat. III, IV or V Hitch 20 Optimizer Ductile Iron Wheels 25 Under Frame Clearance LED Warning Lights & SMV Emblem 8 Roller Axles Hitch Floats 10 Degrees Up, 20 Degrees Down Safety Chain Kit 61 mm Heavy-Duty Bearings Wings Float 10 Degrees Down Powder Coat Paint Horsepower Requirements: 9 to 10 HP per Foot Set-Up Time: 45 to 50 Hours of Shanks WL-3630-30 30 17 8 Notched Notched 63 27,700 lbs. $ 87,636.00 WLC-3630-30 30 17 8 Notched Crowfoot 63 26,984 lbs. 87,543.00 WCL-3630-30 30 17 8 Crowfoot Notched 63 27,302 lbs. 87,343.00 WCC-3630-30 30 17 8 Crowfoot Crowfoot 63 26,586 lbs. 87,246.00 WLO-3630-30 30 17 8 Notched Optimizer 63 28,124 lbs. 88,656.00 WOL-3630-30 30 17 8 Optimizer Notched 63 28,431 lbs. 88,590.00 WOO-3630-30 30 17 8 Optimizer Optimizer 63 28,843 lbs. 89,198.00 WL-3630-36 36 6 19 Notched Notched 75 29,900 lbs. 94,978.00 WLC-3630-36 36 6 19 Notched Crowfoot 75 29,059 lbs. 94,877.00 WCL-3630-36 36 6 19 Crowfoot Notched 75 29,438 lbs. 94,660.00 WCC-3630-36 36 6 19 Crowfoot Crowfoot 75 28,597 lbs. 94,556.00 WLO-3630-36 36 6 19 Notched Optimizer 75 30,415 lbs. 95,874.00 WOL-3630-36 36 6 19 Optimizer Notched 75 30,775 lbs. 95,802.00 WOO-3630-36 36 6 19 Optimizer Optimizer 75 31,271 lbs. 96,724.00 Ductile Iron Wheels Carry Five Year Limited Warranty Against Breakage. s and Specifications may be subject to change without notice. s do not include shipping or setup.
s Effective as of 1-18 PULVI-MULCHER/SEEDBED MAKER 3630 s - 30 & 36 6 39 ACCESSORIES & OPTIONAL EQUIPMENT 185120 2 Reversible Point with Hardware 2.0 lbs. In Base 181331 Two-Piece S-Tine Shank Assembly, Clamp & Hardware (Less Point) 26.0 lbs. $ 130.00 156949 Single Lip Cat. V Hitch* 44.0 lbs. 177.00 193256 Wing Limit Shim Kit (Limits Wing Down Float For Turning on Level Land) 16.0 lbs. 171.00 184486 Front Scraper Kit for 30 s (For Notched Rollers) 307.0 lbs. 1,682.00 184487 Front Scraper Kit for 36 6 s (For Notched Rollers) 360.0 lbs. 1,997.00 185115 Land Leveler Kit for 30 s 540.0 lbs. 1,676.00 185116 Land Leveler Kit for 36 6 s 650.0 lbs. 1,997.00 185117 V-Leveler Kit for 30 s 568.0 lbs. 2,197.00 185118 V-Leveler Kit for 36 6 s 616.0 lbs. 2,554.00 198627 Coil Tine Harrow Kit for 30 s 2,311.0 lbs. 11,496.00 198626 Coil Tine Harrow Kit for 36 6 s 2,470.0 lbs. 12,651.00 184488 Rear Hitch Kit 355.0 lbs. 1,591.00 * Please specify which hitch is needed when placing order. Cat. III or Cat. IV are included in the base price of the machine, see above for additional cost if Cat. V hitch is needed. s and Specifications may be subject to change without notice. s do not include shipping or setup.