TRUCK TRUCK QCCANADA
Matching winter tires You should have at least 2 matching winter tires on the primary drive axle, but recommend using 4 matching tires on the four outside corners of the vehicle - even when driving a 4X4 vehicle. Mixing tires with different tread patterns, internal construction and size compromises stability, and should be avoided. 3.5 mm tread Tires should have 3.5 mm of tread remaining to be considered winter tires. Tires that are worn have reduced traction and should not be used in winter weather. Air pressure Maintaining proper air pressure extends tread life and improves safety. Tire pressure decreases as temperatures drop, so have the pressure checked at least once a month, when the tires are cold. CHAIN CLASSIFICATION & SIZING ABOUT WINTER TIRES The 3-peaked mountain and snowflake symbol on the side of the tire. These winter tires offer the best traction on snow and ice, and in cold weather. The mud and snow symbol on the side of the tire These winter tires offer better traction than summer tires, however, they are less effective than 3-peaked mountain and snowflake tires on snow and ice, and in cold weather. S.A.E CLASSIFICATIONS SAE Class S Regular (non-reinforced) passenger tire chains and cables for vehicles with restricted wheel well clearances. 1.46 clearance on tread-face, 0.59 clearance on side-wall. SAE Class U Regular (non-reinforced) and lug reinforced passenger tire chains for vehicles with regular (non-restricted) wheel well clearances. 1.97 clearance on tread-face, 0.91 clearance on side-wall SAE Class W Those passenger tire chains that use light truck components, as well as some light truck chains. 2.50 clearance on tread face, 1.50 clearance on side-wall TIRE CLEARANCE A C D C TIRE CHAIN IDENTIFICATION THREE ENVELOPES A MINIMUM DIMENSIONS C SAE CLASS S 1.46 (37mm) 0.59 (15mm) A A SAE CLASS U 1.97 (50mm) 0.91 (23mm) SAE CLASS W 2.5 (63.5mm) 1.5 (38.1mm) NOTE: For design purposes, D is the maximum crown tire section width as established by the Tire and Rim Association (TRA). The minimum clearances specified must be maintained around spring clips, spring bolts, fenders, braces, splash pans, fuel lines, brake lines, brake controls, and wherever necessary. Tire size must be known in order to select a tire chan of correct fit. For passenger cars, vans, and small pick-up trucks, it is important to check the owner s manual. The restricted wheel clearances in most of today s downsized and front drive vehicles may require the use of SAE Class S tire chains, as noted in the manuals.
CHAIN CLASSIFICATION & SIZING UNITS OF MEASURE IMPERIAL (inches) Gauge Fractional METRIC (mm) TRADE SIZE 0.177 11/64 4.5mm 1/0 0.192 3/16 4.8mm 2/0 0.207 13/64 5.2mm 3/0 0.218 7/32 5.54mm 4/0 0.230 15/64 5.84mm 0.250 1/4 6.35mm 5/0 0.281 9/32 7.0mm 6/0 IMPERIAL (inches) Gauge Fractional METRIC (mm) TRADE SIZE 0.312 5/16 8.0mm 7/0 0.344 11/32 9.0mm 8/0 0.375 3/8 9.5mm 9/0 0.393 25/64 10.0mm 0.406 13/32 10.3mm 10/0 0.437 7/16 11.1mm 11/0 0.500 1/2 12.7mm 12/10 TIRE SIZING Knowing the customer s tire size is important for choosing the correct tire chain part number. Our chains will accommodate the vast majority of tire sizes available. However instances do occur which warrant confirming the dimensions of a tire to ensure the chain will fit. QCCanada s sales staff are trained in how to design a chain for any size tire. IMPERIAL SIZES Imperial sizing is normally expressed in two ways. Tires indicating the height/width and rim size in inches look like this. Eg: 31x10.5x15 = 31 (Height) X 10.5 (Width) X15 (Wheel diameter) Tires indicating width and rim size, look like this. Eg: 11R24.5 Sizes with only two figures are missing the sidewall height of the tire. Although many common truck sizes are standardized you may need to consult with manufacturers to confirm tire dimensions for specialty sizes. The first number indicates the width of the tire in millimetres. The second figure represents the height of the side wall expressed as a percentage of the first figure. For example; 315/80R22.5 the side wall is 80% of the tire width or 315 X 80%=252mm. The final figure is the diameter of the wheel in inches. Width of tire in millimeters Ratio of height to width Aspect Ratio Aspect Ratio 252mm 0.531 17/32 13.5mm 13/10 METRIC SIZES Metric sizes are normally shown with three numerical figures Eg: 315/80R22.5 Diameter of wheel in inches Rim Diameter 22.5 or 571.5mm Aspect Ratio 252mm
TRUCK CHAIN CONFIGURATION & ANATOMY SINGLE MOUNT SINGLES DUAL MOUNT DUALS TRIPLE MOUNT TRIPLES 1/2 pair of singles shown. Cross chains span the width of one tire. 1/2 pair of duals shown. Cross chains span the width of two tandem tires on a dual axle set up. TIRE CHAIN ANATOMY 1/2 pair of triples shown. Centre side chain rail lies in-between the two tandem tires of a dual axle set up. Advantage: Centre rail helps keep the cross chains from shifting and twisting. There must be enough of a gap between the tandem tires to accommodate the centre rail. 1. Fastener (boomer) Joins and secures the ends of the chain together. 2. Quick Hook (C-hook) inside hook. 3. Cross Chain (cross links) Provides traction with the ground surface. 4. Cross Chain Hook Secures cross chains to the side chain. 5. Side Chain (side rails) Acts as the frame for tire chain construction. 6. Centre Rail (triples only) Simply a piece of side chain in the middle of a 1/2 set of triple chains. QCC Traction Products LINKS www.qccanada.com/useful-links 7. Cams/Cam Side Chain (not featured on the set of triples in this picture) Side chain with cams is available to make tightening chain easier with the use of a cam tool).
TIRE CHAIN REGULATIONS - BRITISH COLUMBIA
TIRE CHAIN REGULATIONS NORTH AMERICAN TIRE CHAIN REGULATIONS CONTACT INFORMATION AND LINKS Several Provinces and States have chain laws in place that require traction devices to be carried/or used at specific times of the year or certain road conditions. See the links below. Failure to do so can result in fines and/ or other penalties. It s not mandatory to use tire chains in a number of Provinces or States. Check the Province or State Depart of Transportation for the requirements or regulatory changes. CANADA British Columbia Ministry of Transportation http://www2.gov.bc.ca/gov/content/transportation/driving-and-cycling/driving/ traveller-information/seasonal/winter-driving USA Washington State Department of Transportation: www.wsdot.wa.gov/winter www.wsdot.wa.gov/commercialvehicle/chain_req Oregon State Department of Transportation: www.tripcheck.com/pages/chain-laws.asp www.tripcheck.com/pages/minimum-chain-requirements.asp California State Department of Transportation: www.dot.ca.gov http://www.dot.ca.gov/hq/roadinfo/chcontrl.htm Nevada State Department of Transportation: www.nevadadot.com www.nevadadot.com/safety/winter/chains.aspx Colorado State Department of Transportation: www.codot.gov/travel https://www.codot.gov/travel/colorado-chain-law STUDDED TIRES OR TIRE CHAINS? Cable and tire chains are legal to use in every Province or State in North America. They are considered temporary and installed only when needed. Some Provinces and States will limit the use/or outlaw studded tires because the studs are considered a permanent device and contribute to the damage of the road and highway surfaces. Chain law regulations may change at any time.
TIRE CHAIN REGULATIONS -CALIFORNIA STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION (Caltrans) Chain Requirements Revised 12/15 V ehicles are permitted in chain control areas when equipped with chains or Automatic Traction Device (ATD) as indicated. Tire traction devices are defined in the California Vehicle Code (VC) Section 605 which include conventional link-type tire chains and cable chains, as well as other less conventional devices. When the term chains is used here, it means any tire traction device (not necessarily link type chain) which meets the requirements of (VC) Section 605. Vehicles with cable chains as well as other less conventional devices are legal in California. However, these may be restricted at times due to local conditions. Minimum legal tread depth for mud and snow tires is 6/32 of an inch. Caltrans and the California Highway Patrol (CHP), reserve the right to prohibit any vehicle from entering a chain control area when it s determined that the traction devices do not meet the requirements of (VC) section 605. AUTOS/PICKUPS 1 1F 2 BUSES/RECREATIONAL VEHICLES (Articulated buses must also chain outside wheels of last axle.) 3 4 Type 2 Type 3 TRUCKS LEGEND Driving axle Non-driving axle Wheel with chains or ATD Wheel with no chains or ATD Drive axle must be chained. Chains on trailers may be staggered front and back. Caltrans and CHP may require chains on all drive wheels if conditions warrant. Both axles must be chained (four wheels with chains or ATD). Chains required on inside dual (if possible). 7% 5 5 Truck Type 2 6 7 Truck Type 3 Tractor and Semi-trailer Single Dr. 8 Tractor and Semi-trailer Type 3-S-2 10 NOTES All vehicles, including four wheel or all wheel drive vehicles must carry chains upon entering a chain control area. All vehicles, including four wheel drive vehicles, that are towing trailers must have chains on one drive axle. Trailers with brakes must have chains on one axle. Front wheel drive vehicles must have chains on front (drive) axle. On any semi-trailer, only one set of chains is required regardless of number of axles. Chains are not required on tag axle. Trucks or tractors equipped with super singles, chains are required on all drive wheels. Tractor, Semi-trailer, and Trailer Type 3-S-1-T-2 11 Truck and Trailer Type 3-T-3 or 3-T-2 The following truck may be restricted when chains are required: 16 Tractor, Semi-trailer, and Trailer Type 2-S-1-T-2 or Acceptable on either axle of semi-trailers. For questions regarding these configurations, please contact the Caltrans Maintenance Pr ogram at (916) 654-2852.
TIRE CHAIN REGULATIONS -WASHINGTON STATE Minimum Chain RequirementAll vehicles over 10,000 lbs gross vehicle weight (GVW) shall carry a minimum of two (2) extra chains for use in the event that road conditions require the use of more chains or in the event that chains in use are broken or otherwise made useless, WAC 204-24-050 (2) (f). Approved chains for vehicles over 10,000 pounds gross vehicle weight shall have at least two side chains to which are attached sufficient cross chains of hardened metal so that at least one cross chain is in contact with the road surface at all times. Plastic chains shall not be allowed. The Washington State Patrol may approve other devices as chains if the devices are equivalent to regular chains in performance (cable chains allowable). All vehicles and combinations of vehicles over 10,000 pounds shall carry sufficient tire chains to meet the requirements from November 1 to April 1 of each year or at other times when chains are required for such vehicles: Diagram of proper chain placement for different axle configurations shown below. WHEN SIGNS MARKED VEHICLES OVER 10,000GVWR OR ALL VEHICLES - CHAINS REQUIRED (EXCEPT ALL WHEEL DRIVE) ARE POSTED, ALL VEHICLES OVER 10,000 LBS. MUST HAVE TIRE CHAINS MOUNTED ON THE TIRES AS REQUIRED.
CRUZ LT CABLE CHAINS TRUCK 10.2mm metal rollers over cross cable. Ideal for low clearance vehicles. These cables are an economical alternative to traditional chains. Provides great emergency traction. SINGLES TRIPLES CROSS CABLE CROSS LENGTH CABLE# PART # WEIGHT/PR PART # WEIGHT/PR 2314 7Kg (15 lbs) 4314 13Kg (29 lbs) 8825 17 2315 7Kg (16 lbs) 4315 15Kg (33 lbs) 8825 17 2316 8Kg (17 lbs) 4316 15Kg (34 lbs) 8825 17 2317 8Kg (18 lbs) 4317 19Kg (41 lbs) 8825 17 WIDE BASE CABLES SINGLES WEIGHT/PR CROSS CABLE # CROSS CABLE LENGTH PART # WEIGHT/PR PART # WEIGHT/PR 3055 10Kg (23 lbs) 8813 21.5 3057 10Kg (23 lbs) 8813 21.5 3061 10Kg (23 lbs) 8814 23.75 3065 10Kg (22 lbs) 8815 24.5 3069 10Kg (21 lbs) 8815 24.5 3071 10Kg (22 lbs) 8815 24.5 LIGHTNING DIAGONAL CABLE CHAINS Standard Packaging Spider Tensioner #0218 Fastener 10.2mm metal rollers over cross cable. Ideal for low clearance vehicles. These cables are an economical alternative to traditional chains. Provides great emergency traction. SINGLES WEIGHT/PR CROSS CABLE LENGTH PART # WEIGHT/PR WEIGHT/PR A881 12Kg (27 lbs) 22 A887 14Kg (31 lbs) 25 A891 14Kg (30 lbs) 25 A896 17Kg (37 lbs) 30 A898 19Kg (42 lbs) 30 Standard Packaging QCC Traction Products All Spider tensioners sold separately Spider Tensioner #0218
TRUCK CANADIAN SPEC V-BAR 7mm carbon steel / 8mm alloy steel, V-Bar reinforced cross chains. Provides excellent traction for extreme weather conditions and some off-road applicaitons. Extra heavy side chain & cross chain hooks for durability. Ensure your vehicle has the clearance for these chains prior to using them. QC -Cam Locks / HD -Heavy Duty SINGLES SINGLES W/ CAMS CROSS PART # WEIGHT/PR PART # WEIGHT/PR CHAIN # CROSS CHAIN SIZE V322 24Kg (52 lbs) V322QC 25Kg (54 lbs) V5315 7mm (9/32 ) V332 25Kg (55 lbs) V332QC 26Kg (57 lbs) V5330 7mm (9/32 ) V342 26Kg (57 lbs) V342QC 27Kg (59 lbs) V5340 7mm (9/32 ) V343 27Kg (60 lbs) V343QC 28Kg (62 lbs) V5340 7mm (9/32 ) V343HD 32Kg (71 lbs) V343HDQC 32Kg (71 lbs) V5340HD 8mm (5/16 ) V344 29Kg (64 lbs) V344QC 30Kg (66 lbs) V5340 7mm (9/32 ) V344HD 31Kg (69 lbs) V344HDQC 33Kg (72 lbs) V5340HD 8mm (5/16 ) V355 34Kg (75 lbs) V355QC 35Kg (77 lbs) V5355 8mm (5/16 ) V356 37Kg (81 lbs) V356QC 38Kg (83 lbs) V5355 8mm (5/16 ) V372 42Kg (93 lbs) V372QC 43Kg (95 lbs) V5355 8mm (5/16 ) V375 43Kg (94 lbs) V375QC 44Kg (96 lbs) V5370 8mm (5/16 ) V377 43Kg (95 lbs) V377QC 44Kg (97 lbs) V5370 8mm (5/16 ) QCCANADA Cam Locks Available (QC) DUALS DUALS W/ CAMS CROSS PART # WEIGHT/PR PART # WEIGHT/PR CHAIN # CROSS CHAIN SIZE V422 32Kg (71 lbs) V422QC 32Kg (71 lbs) V5315 (7mm) (9/32 ) V432 37Kg (81 lbs) V432QC 37Kg (81 lbs) V5330 (7mm) (9/32 ) V442 39Kg (85 lbs) V442QC 39Kg (85 lbs) V5340 (7mm) (9/32 ) V443 42Kg (92 lbs) V443QC 42Kg (92 lbs) V5340 (7mm) (9/32 ) V444 43Kg (95 lbs) V444QC 44Kg (97 lbs) V5340 (7mm) (9/32 ) TRIPLES TRIPLES W/ CAMS CROSS CHAIN # PART # WEIGHT/PR PART # WEIGHT/PR CROSS CHAIN SIZE V722 42Kg (91 lbs) V722QC 43Kg (95 lbs) V5315 (7mm) (9/32 ) V732 45Kg (98 lbs) V732QC 46Kg (102 lbs) V5330 (7mm) (9/32 ) V742 47Kg (103 lbs) V742QC 49Kg (107 lbs) V5340 (7mm) (9/32 ) V742HD 54Kg (120 lbs) V742HDQC 97Kg (125 lbs) V5340HD (8mm) (5/16 ) V743 49Kg (108 lbs) V743QC 50Kg (110 lbs) V5340 (7mm) (9/32 ) V743HD 57Kg (126 lbs) V743HDQC 59Kg (131 lbs) V5340HD (8mm) (5/16 ) V744 54Kg (118 lbs) V744QC 54Kg (120 lbs) V5340 (7mm) (9/32 ) V744HD 59Kg (131 lbs) V744HDQC 59Kg (130 lbs) V5340HD (8mm) (5/16 ) V755 62Kg (137 lbs) V755QC 64Kg (141 lbs) V5355 (8mm) (5/16 ) V756 67Kg (148 lbs) V756QC 69Kg (152 lbs) V5355 (8mm) (5/16 ) V772 72Kg (158 lbs) V772QC 74Kg (162 lbs) V5355 (8mm) (5/16 ) V775 73Kg (160 lbs) V775QC 74Kg (164 lbs) V5370 (8mm) (5/16 ) QCCANADA Available in Dual and Triples (Triples shown above) ACCESSORIES 0212 0217 V777 74Kg (162 lbs) V777QC 75Kg (166 lbs) V5370 (8mm) (5/16 ) All Spider tensioners sold separately 0218
TRUCK V-BAR LIGHTWEIGHT 6mm lightweight alloy steel, V-Bar reinforced through-hardened cross chains. Provides excellent traction for extreme weather conditions and some off-road applications. 70% weight of standard V-Bar increasing ease of installation. Comes with cams for additional adjustment control. QCCANADA ACCESSORIES PART # SINGLES W/ CAMS WEIGHT/PR CROSS CHAIN # CROSS CHAIN SIZE 2847LWQC 17Kg (38 lbs) 6853LW 6 mm 2849LWQC 19Kg (42 lbs) 6853LW 6 mm 0218 Spider Tensioners Comes with Cam Locks PART # TRIPLES W/ CAMS WEIGHT/PR CROSS CHAIN # CROSS CHAIN SIZE 4847LWQC 35Kg (78 lbs) 6853LW 6 mm 4849LWQC 38Kg (83 lbs) 6853LW 6 mm All Spider tensioners sold separately
TRUCK
TRUCK SQUARE LINK ALLOY 7mm and 8mm cross Chains. Alloy steel for durability. Includes cam locks. Reversible for extra long life - can run on both sides. Square edge links dig into driving surface providing excellent traction. Comes with Cam Locks ACCESSORIES 0218 Spider Tensioners HD -Heavy Duty SINGLES W/ CAMS TRIPLES W/ CAMS PART # WEIGHT/PR PART # WEIGHT/PR PATHFINDER TIRE CHAINS SQUARE ICE CROSS CHAIN # CROSS CHAIN SIZE 2137SLC 21Kg (47 lbs) 4137SLC 42Kg (92 lbs) 6251SL (7mm) (9/32 ) 2139SLC 28Kg (61 lbs) 4139SLC 48Kg (105 lbs) 6251SL (7mm) (9/32 ) 2141SLC 25Kg (56 lbs) 4141SLC 48Kg (105 lbs) 6251SL (7mm) (9/32 ) 2147SLC 28Kg (61 lbs) 4147SLC 51Kg (112 lbs) 6253SL (7mm) (9/32 ) 2149SLC 29Kg (65 lbs) 4149SLC 55Kg (121 lbs) 6253SL (7mm) (9/32 ) 2141HDQC 28Kg (62 lbs) 4141HDQC 66Kg (146 lbs) 6260SL (8mm) (5/16 ) 2147HDQC 31Kg (68 lbs) 4147HDQC 69Kg (151 lbs) 6263SL (8mm) (5/16 ) 2149HDQC 34Kg (74 lbs) 4149HDQC 71Kg (156 lbs) 6263SL (8mm) (5/16 ) 2151SLC 32Kg (70 lbs) 4151SLC 57Kg (126 lbs) 6260SL (8mm) (5/16 ) 2155SLC 34Kg (74 lbs) 4155SLC 60Kg (133 lbs) 6263SL (8mm) (5/16 ) All Spider tensioners sold separately
The Can Trac is comprised of alloy steel which keeps the chain light and offers excellent strength. The diamond pattern creates a smooth ride and provides great on-road traction. The Can Trac is a great choice for operators looking for a lightweight traction solution. TRUCK V-BAR CAN LIGHTWEIGHT TRAC QCCANADA QCCANADA QCCANADA PATHFINDER TIRE CHAINS SQUARE ICE ACCESSORIES 0218 Spider Tensioners All Spider tensioners sold separately Comes with Cam Locks PART # SINGLES W/ CAMS WEIGHT/PR CROSS PATTERN # CT343QC 19.6 Kg (44 lbs) CT55225 CT344QC 22.7 Kg (50 lbs) CT55225 CT355QC 22.2 Kg (49 lbs) CT55225 PART # TRIPLES W/ CAMS WEIGHT/PR CROSS PATTERN # CT743QC 38.1 Kg (84 lbs) CT55225 CT744QC 44 Kg (97 lbs) CT55225 CT755QC 43.1 Kg (95 lbs) CT55225
TRUCK STUDDED ALLOY 8mm super alloy studded cross chains for deep lug traction tires. Oversized studs & deep carburization for maximum strength & durability. 10mm hardened bell-style hook keeps the cross chain stable on the tire. 8mm hardened side chain stands up to the stress of cross chain twists and pulls. 7mm lightweights have 6mm side chain & 8mm hooks for a super strong, ultra light weight chain.
TRUCK What to Look for in Premium Studded Truck Chains What is the Nordic advantage? Nordic chains use a blend of alloys and a unique heat treatment process to achieve a tool hard surface that avoids the brittleness found in traditional case hardened products. The following graphics show that Nordic branded products have a more consistent microstructure, indicating a harder surface for longer life and stronger core which resists breakages. All Nordic studded skidder chains utilize the same manufacturing process. Inconsistent Core Microstructure HARDNESS TEST REPORT EUROPEAN COMPETITOR S 8MM STUDDED Long needles DISTANCE FROM SURFACE MM (INCH) Large, white carbide areas A Deepest Case Depth 0.5MM Consistent Core Microstructure NORDIC 8MM STUDDED Smaller, white carbide areas, shorter needles EUROPEAN A COMPETITOR B 8MM STUDDED NORDIC 8MM STUDDED 0.05 6.8 6.8 0.10 6.4 6.9 0.15 6.4 6.5 0.20 6.1 6.4 0.25 (0.010 ) 5.9 6.2 0.30 5.6 6.3 0.35 5.7 6.2 0.40 5.7 5.9 0.45 5.2 5.8 0.50 (0.020 ) 4.7 5.6 0.55-5.0 0.60-5.0 0.65-4.8 1.00 (0.042 ) 4.5 4.5 CORE 4.3 4.4 Nordic Studded Chains have deeper case hardening and more consistent core microstructure than the competition providing you with the strongest, most durable studded product on the market. B At Left: Close-up of our Nordic 8mm studs after 500 kms of use on a loaded tandem-trailer logging truck. www.qccanada.com 1-888-507-9734
TRUCK QC -Cam Locks / HD -Heavy Duty 7MM LIGHT WEIGHT (LW) SINGLES SINGLES w/ CAM LOCKS TRIPLES TRIPLES w/ CAM LOCKS CROSS CHAIN # PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR S343LW 23.1Kg (51 lbs) S343LWQC 24.9Kg (55 lbs) S743LW 38.1Kg (84 lbs) S743LWQC 40.3Kg (89 lbs) 6913L S344LW 24Kg (53 lbs) S344LWQC 25.8Kg (57 lbs) S744LW 43Kg (95 lbs) S744LWQC 45.3Kg (100 lbs) 6913L 7MM STANDARD & 8MM HEAVY DUTY (HD) SINGLES SINGLES w/ CAM LOCKS TRIPLES TRIPLES w/ CAM LOCKS CROSS PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR CHAIN # Cam Locks Available Allow an easy way to tighten slack in the chains. SINGLES SINGLES w/ CAM LOCKS TRIPLES TRIPLES w/ CAM LOCKS CROSS PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR PART # WEIGHT/PR CHAIN # S342-10 32.2Kg (71 lbs) S342QC-10 34Kg (75 lbs) S742-10 57.1Kg (126 lbs) S742QC-10 60.3Kg (133 lbs) 6927 S343-10 34.9Kg (77 lbs) S343QC-10 35.8Kg (79 lbs) S743-10 62.5Kg (138 lbs) S743QC-10 65.3Kg (144 lbs) 6927 S344-10 35.8Kg (79 lbs) S344QC-10 39.9Kg (88 lbs) S744-10 67.5Kg (149 lbs) S744QC-10 70.3Kg (155 lbs) 6927 S379-10 49.8Kg (110 lbs) S379QC-10 51.2Kg (113 lbs) S779-10 84.8Kg (187 lbs) S779QC-10 87Kg (192 lbs) 6928 S382-10 54.4Kg (120 lbs) S382QC-10 55.7Kg (123 lbs) S782-10 92.5Kg (204 lbs) S782QC-10 95.2Kg (210 lbs) 6930 S387-10 81.6Kg (180 lbs) S387QC-10 83Kg (183 lbs) S787-10 138.7Kg (306 lbs) S787QC-10 141Kg (311 lbs) 6930 CROSS CHAIN S320 23.5Kg (52 lbs) S320QC 24.4Kg (54 lbs) S720 (93 lbs) S720QC 43.5Kg (96 lbs) 6912 7mm S322 24.4Kg (54 lbs) S322QC 25.4Kg (56 lbs) S722 44.4Kg (98 lbs) S722QC 46.7Kg (103 lbs) 6912 7mm S332 25.8Kg (57 lbs) S332QC 27.2Kg (60 lbs) S732 45.3Kg (100 lbs) S732QC 47.6Kg (105 lbs) 6913 7mm S342 26.7Kg (59 lbs) S342QC 28.1Kg (62 lbs) S742 47.6Kg (105 lbs) S742QC 50.3Kg (111 lbs) 6913 7mm S343 29Kg (64 lbs) S343QC 29.9Kg (66 lbs) S743 52.1Kg (115 lbs) S743QC 54.4Kg (120 lbs) 6913 7mm S343HD 35.3Kg (78 lbs) S343HDQC 36.7Kg (81 lbs) S743HD 63.5Kg (140 lbs) S743HDQC 65.7Kg (145 lbs) 6923 8mm S344 29.4Kg (65 lbs) S344QC 24.4Kg (73 lbs) S744 56.2Kg (124 lbs) S744QC 58.5Kg (129 lbs) 6913 7mm S344HD 36.2Kg (80 lbs) S344HDQC 37.6Kg (83 lbs) S744HD 68.4Kg (151 lbs) S744HDQC 70.7Kg (156 lbs) 6923 8mm S355 35.3Kg (78 lbs) S355QC 36.7Kg (81 lbs) S755 63.5Kg (140 lbs) S755QC 65.7Kg (145 lbs) 6925 8mm S356 38.2Kg (80 lbs) S356QC 37.6Kg (83 lbs) S756 68.4Kg (151 lbs) S756QC 70.7Kg (156 lbs) 6925 8mm S372 43.5Kg (96 lbs) S372QC 44.9Kg (99 lbs) S772 73.9Kg (163 lbs) S722QC 76.2Kg (168 lbs) 6926 8mm S375 42.6Kg (94 lbs) S375QC 43.9Kg (97 lbs) S775 72.5Kg (160 lbs) S775QC 74.8Kg (165 lbs) 6931 8mm S377 44.4Kg (98 lbs) S377QC 45.8Kg (101 lbs) S777 75.7Kg (167 lbs) S777QC 78Kg (172 lbs) 6931 8mm S379 47.1Kg (104 lbs) S379QC 48.5Kg (107 lbs) S779 80.2Kg (177 lbs) S779QC 82.5Kg (182 lbs) 6926 8mm S382 49.8Kg (110 lbs) S382QC 51.2Kg (113 lbs) S782 84.8Kg (187 lbs) S782QC 87Kg (192 lbs) 6932 8mm 10MM XHD EXTRA HEAVY DUTY ACCESSORIES Available in Triples (Left) Use Spider Tensioners #0216 / 0218 Avoid tire chains slipping or loosening by using a spider tensioner. All Spider tensioners sold separately
TRUCK FIT CHART *Also Available with Cam Locks (QC) Model# not shown RED - Product # s available in Extra Heavy Duty 8mm TIRE SIZE COBRA CABLE / LIGHTNING DIAGONAL CABLE SINGLES CRUZ LT CABLE TRIPLES REG TWIST LINK SINGLES* REG TWIST LINK TRIPLES* V-BAR LIGHTWEIGHT W/ CAMS SINGLES V-BAR LIGHTWEIGHT W/ CAMS TRIPLES CDN SPEC V-BAR SINGLES* CDN SPEC V-BAR TRIPLES* SQUARE LK ALLOY W/ CAMS SINGLES SQUARE LK ALLOY W/ CAMS TRIPLES UNDER 19.5 RIMS 9.900-15 2314/A2029 4314 2237 4237 V322 V722 2137SLC 4137SLC 19.5 RIMS 225/70-19.5 1663/NA 2214 4214 V320 V720 2114SLC 4114SLC 245/70-19.5 1675/NA 2228 4228 V322 V722 2128SLC 4128SLC 265/70-19.5 2314/NA 4314 2237 4237 V332 V732 2137SLC 4137SLC 285/70-19.5 2314/NA 4315 2246 4246 V342 V742 305/70-19.5 2239 4239 V343 V743 2139SLC 4139SLC 445/65-19.5 V372 V772 8-19.5 1663/NA 2214 4214 V320 V720 2114SLC 4114SLC 15-19.5 3065?NA 3265 V356 V756 16.5-19.5 3055/A891 3255 2149SLC 18-19.5 3057?NA 3257 20 RIMS 245/45-20 V295 275/45-20 1675/NA 2228 4228 V298 2128SLC 4128SLC 285/50-20 1679/A2027 2228 4228 V332 V732 2128SLC 4128SLC 275/60-20 1678/NA 2238 4238 V332 V732 2138SLC 4138SLC 245/70-20 2314/NA 4314 V332 V732 13/80-20 2255 4255 2155SLC 4155SLC 14/80-20 2257 4257 2157SLC 4157SLC 335/80-20 3254 365/80-20 3055/A891 3255 395/85-20 NA/A896 2612 7.00-20 1663/NA 2233 4233 V322 V722 2133SLC 4133SLC 7.50-20 2314/NA 4314 2237 4237 V322 V722 2137SLC 4137SLC 8.25-20 2314/NA 4314 2239 4239 V332 V732 2139SLC 4139SLC 9.00-20 2315/NA 4315 2241 4241 V342 V742 2141SLC 4141SLC 10.00-20 2316/A881 4316 2245 4245 2847LWQC 2847LWQC V343 V743 2147SLC 4147SLC 11.00-20 2317/A887 4317 2251 4251 V355 V755 2151SLC 4151SLC 12.00-20 2317/A891 4317 2255 4255 V356 V756 2155SLC 4155SLC 14.00-20 V377 V777 22 & 22.5 RIMS 10.00-22 2317/A887 4317 2249 4249 2849LWQC 4848LWQC V344 V744 2149SLC 4149SLC 11.00-22 2317/A891 4317 2255 4255 V356 V756 2155SLC 4155SLC 495/45-22.5 445/50-22.5 3069/A898 V375 425-55-22.5 NA/A896 V377 V777 445/55-22.5 3069/NA V377 V777 455/55-22.5 3071/NA V377 V777 385/65-22.5 3055/A891 V372 V772 425/65-22.5 3071/A896 V377 V777
TRUCK FIT CHART *Also Available with Cam Locks (QC) Model# not shown RED - Product # s available in Extra Heavy Duty 8mm TIRE SIZE CAN-TRAC SINGLES/ TRIPLES STUDDED ALLOY SINGLES* STUDDED ALLOY TRIPLES* LIGHT WEIGHT STUDDED SINGLES* LIGHT WEIGHT STUDDED TRIPLES* 3/8 HD NORDIC STUDDED SINGLES 3/8 HD NORDIC STUDDED TRIPLES UNDER 19.5 RIMS 9.900-15 S322 S722 19.5 RIMS 225/70-19.5 S320 S720 245/70-19.5 S322 S722 265/70-19.5 S332 S732 285/70-19.5 S342 S742 305/70-19.5 S343 S743 S343LW S743LW S343-10 S743-10 445/65-19.5 S372 S772 8-19.5 S320 S720 15-19.5 S356 S756 16.5-19.5 18-19.5 20 RIMS 245/45-20 S295 275/45-20 S298 285/50-20 S332 S332 275/60-20 S332 S332 245/70-20 S332 S332 13/80-20 14/80-20 335/80-20 365/80-20 395/85-20 7.00-20 S322 S722 7.50-20 S322 S722 8.25-20 S332 S732 9.00-20 S342 S742 10.00-20 CT343QC/CT743QC S343 S743 S343LW S743LW S343-10 S743-10 11.00-20 CT355QC/CT755QC S355 S755 12.00-20 S356 S756 14.00-20 S382 S782 S382-10 S782-10 22 & 22.5 RIMS 10.00-22 CT344QC/CT744QC S344 S744 S344LW S744LW S344-10 S744-10 11.00-22 S356 S756 495/45-22.5 445/50-22.5 S372 S772 425-55-22.5 S377 S777 S377-10 S777-10 445/55-22.5 S377 S777 S377-10 S777-10 455/55-22.5 S377 S777 S377-10 S777-10 385/65-22.5 S372 S772 425/65-22.5 S377 S777 S377-10 S777-10
TRUCK FIT CHART *Also Available with Cam Locks (QC) Model# not shown RED - Product # s available in Extra Heavy Duty 8mm TIRE SIZE COBRA CABLE / LIGHTNING DIAGONAL CABLE SINGLES CRUZ LT CABLE TRIPLES REG TWIST LINK SINGLES* REG TWIST LINK TRIPLES* V-BAR LIGHTWEIGHT W/ CAMS SINGLES V-BAR LIGHTWEIGHT W/ CAMS TRIPLES CDN SPEC V-BAR SINGLES* CDN SPEC V-BAR TRIPLES* SQUARE LK ALLOY W/ CAMS SINGLES SQUARE LK ALLOY W/ CAMS TRIPLES 22.5 RIMS CONTINUED 445/65-22.5 3061/A898 3261 225/70-22.5 NA/1669 2233 4233 V332 V732 2133SLC 4133SLC 245/70-22.5 NA/2314 4314 2239 4239 V332 V732 2139SLC 4139SLC 255/70-22.5 NA/2314 4314 2239 4239 V332 V732 2139SLC 4139SLC 275/70-22.5 2316/A881 4316 2241 4241 V342 V742 2141SLC 4141SLC 365/70-22.5 NA/3055 3255 V356 V756 235/75-22.5 2239 4239 V332 V732 2139SLC 4139SLC 245/75-22.5 NA/2314 4314 2241 4241 V332 V732 2141SLC 4141SLC 265/75-22.5 2316/A881 4316 2241 4241 V342 V742 2141SLC 4141SLC 285/75-22.5 2316/A881 4316 2247 4247 V343 V743 2147SLC 4147SLC 295/75-22.5 2316/A881 4316 2247 4247 2847LWQC 4847LWQC V343 V743 2147SLC 4147SLC 235/80-22.5 NA/2314 4314 2239 4239 V332 V732 2139SLC 4139SLC 255/80-22.5 NA/2315 4315 2241 4241 V342 V742 2141SLC 4141SLC 275/80-22.5 2316/A881 4316 2245 4245 2847LWQC 4847LWQC V343 V743 2147SLC 4147SLC 295/80-22.5 2317/A887 4317 2251 4251 V355 V755 2151SLC 4151SLC 315/80-22.5 NA/2317 4317 2255 4255 V355 V755 2155SLC 4155SLC 365/80-22.5 3055/A891 V356 V756 275/85-22.5 2316/A891 4316 2247 4247 2847LWQC 4847LWQC V343 V743 2147SLC 4147SLC 305/85-22.5 2251 4251 V344 V744 2151SLC 4151SLC 7-22.5 NA/1663 2233 4233 V320 V720 2133SLC 4133SLC 8-22.5 2237 4237 V322 V722 2137SLC 4137SLC 9-22.5 NA/2314 4314 2239 4239 V332 V732 2139SLC 4139SLC 10-22.5 NA/2315 4315 2241 4241 V342 V742 2141SLC 4141SLC 11-22.5 2316/A881 4316 2245 4245 2847LWQC 4847LWQC V343 V743 2147SLC 4147SLC 12-22.5 2317/A887 4317 2251 4251 V355 V755 2151SLC 4151SLC 12.5-22.5 2317/A887 4317 2255 4255 V356 V756 2155SLC 4155SLC 15-22.5 3055/A881 3255 16.5-22.5 3071/A896 3271 18-22.5 3061/A898 3261 24 / 24.5 / 25 RIMS 11.00-24 2317/A887 4317 2253 4253 V356 V756 2153SLC 4153SLC 12.00-24 2317/A887 4317 2257 4257 V372 V772 2157SLC 4157SLC 14.00-24 285/75-24.5 2316/A881 4316 2249 4249 2849LWQC 4849LWQC V343 V743 2149SLC 4149SLC 305/75-24.5 2317/A887 4317 2255 4255 V344 V744 2155SLC 4155SLC 315/75-24.5 3055/A891 2255 4255 V355 V755 2155SLC 4155SLC 275/80-24.5 2316/A881 4316 2247 4247 2847LWQC 4847LWQC V344 V744 2147SLC 4147SLC 285/80-24.5 2317/A887 4317 2249 4249 2849LWQC 4849LWQC V344 V744 2149SLC 4149SLC 11-24.5 2317/A887 4317 2249 4249 2849LWQC 4849LWQC V344 V744 2149SLC 4149SLC 12-24.5 2317/A887 4317 2255 4255 V356 V756 2155SLC 4155SLC 14.00-25
TRUCK FIT CHART *Also Available with Cam Locks (QC) Model# not shown RED - Product # s available in Extra Heavy Duty 8mm TIRE SIZE CAN-TRAC SINGLES/ TRIPLES STUDDED ALLOY SINGLES* STUDDED ALLOY TRIPLES* LIGHT WEIGHT STUDDED SINGLES* LIGHT WEIGHT STUDDED TRIPLES* 3/8 HD NORDIC STUDDED SINGLES 3/8 HD NORDIC STUDDED TRIPLES 22.5 RIMS CONTINUED 445/65-22.5 S382 S782 S382-10 S782-10 225/70-22.5 S332 S732 245/70-22.5 S332 S732 255/70-22.5 S332 S732 275/70-22.5 S342 S742 365/70-22.5 S356 S756 235/75-22.5 S332 S732 245/75-22.5 S332 S732 265/75-22.5 S342 S742 285/75-22.5 CT343QC/CT743QC S343 S743 S343LW S743LW S343-10 S743-10 295/75-22.5 CT343QC/CT743QC S343 S743 S343LW S743LW S343-10 S743-10 235/80-22.5 S332 S732 255/80-22.5 S342 S742 275/80-22.5 CT343QC/CT743QC S343 S743 S343LW S743LW S343-10 S743-10 295/80-22.5 S355 S755 315/80-22.5 S355 S756 365/80-22.5 S356 S756 275/85-22.5 S343 S743 S343LW S743LW S343-10 S743-10 305/85-22.5 S344 S744 S344LW S744LW S344-10 S744-10 7-22.5 S320 S720 8-22.5 S322 S722 9-22.5 S332 S732 10-22.5 S342 S742 11-22.5 CT343QC/CT743QC S343 S743 S343LW S743LW S343-10 S743-10 12-22.5 CT355QC/CT755QC S355 S755 12.5-22.5 S356 S756 15-22.5 16.5-22.5 18-22.5 24, 24.5 & 25 RIMS 11.00-24 CT344QC/CT744QC S356 S756 12.00-24 S379 S779 S379-10 S779-10 14.00-24 S387 S787 S387-10 S787-10 285/75-24.5 CT344QC/CT744QC S343 S743 S343LW S743LW S343-10 S743-10 305/75-24.5 S344 S744 S344LW S744LW S344-10 S744-10 315/75-24.5 S355 S755 275/80-24.5 CT344QC/CT744QC S344 S744 S344LW S744LW S344-10 S744-10 285/80-24.5 S344 S744 S344LW S744LW S344-10 S744-10 11-24.5 S344 S744 S344LW S744LW S344-10 S744-10 12-24.5 S356 S756 14.00-25 S387 S787 S387-10 S787-10
PRODUCT APPLICATION PARTS & ACCESSORIES RIM DIAMETER PART # WEIGHT PER/PAIR PAIRS PER CASE SPIDER TENSIONERS assist in ensuring a secure fit for your tire chains and reduces the chance of vehicle damage. Light Truck (7 arms) 0217.9 Kg (2 lb) 30 Medium Truck (6 arms) 0218.8 Kg (1.8 lb) 20 Small Loader / Tractor (7 arms) 0220 1.4 Kg (3 lb) 30 CHAIN / BOLT CUTTERS BC18 BC30 BC36 Medium Handle Long Handle Long Handle TARP STRAPS with S - HOOKS Passenger Car 45 cm (18 ) 2.3 Kg (5 lbs) Truck 76 cm (30 ) 3.6 Kg (8 lbs) Off-Road 91 cm (36 ) 5.4 Kg (12 lbs) PART # STRAP LENGTH PIECES PER BOX CCRTS-9 9 STRAP 50 CCRTS-15 15 STRAP 50 CCRTS-21 21 STRAP 50 CCRTS-31 31 STRAP 50 CCRTS-41 41 STRAP 50 SHOE CHAINS PART # DESCRIPTION MENS WOMENS SCM Medium Shoe Chain 5-9 6-10 SCL Large Shoe Chain 9-5 -12.5 10.5 & UP SCXL Xtra Large Shoe Chain 13 & UP N/A SCDAP Retail Display Box w/ 10pr each of: SCM, SCL, & SCXL 5-13 & UP 6-10.5 & UP
QCCANADA #1-2133 2133St. Surrey, BC. CANADA V3Z 3M3 P: 1-888-507-9734 info@qccanada.com www.qccanada.com