Chapter 6, Solution 1. Joint B: Joint C: Joint FBDs: F = 800 lb T. F = 1700 lb C lb lb F

Similar documents
PROBLEM 6.1 SOLUTION. Free body: Entire truss: (3.2 m) (48 kn)(7.2 m) = 0 = = = BC. 60 kn. Free body: Joint B: = kn T. = 144.

Equilibrium Equilibrium and Trusses Trusses

ENGR-1100 Introduction to Engineering Analysis. Lecture 19

Lecture 20. ENGR-1100 Introduction to Engineering Analysis THE METHOD OF SECTIONS

ENGR-1100 Introduction to Engineering Analysis. Lecture 20

ENGINEERING MECHANICS STATIC

Eng Sample Test 4

To show how to determine the forces in the members of a truss using the method of joints and the method of sections.

Chapter 3 Trusses. Member CO Free-Body Diagram. The force in CO can be obtained by using section bb. Equations of Equilibrium.

Chapter 6: Structural Analysis

6.6 FRAMES AND MACHINES APPLICATIONS. Frames are commonly used to support various external loads.

Announcements. Trusses Method of Joints

Supplement: Statically Indeterminate Trusses and Frames

Plane Trusses Trusses

Chapter 6: Structural Analysis

P.E. Civil Exam Review:

Trusses - Method of Sections

COLUMNS: BUCKLING (DIFFERENT ENDS)

Method of Sections for Truss Analysis

Engineering Mechanics: Statics in SI Units, 12e

SIMPLE TRUSSES, THE METHOD OF JOINTS, & ZERO-FORCE MEMBERS

CSSTP. Given CSSTP. Statements Reasons. Given CSSTP. Mult. Prop. = Div. Prop. = Sym. Prop. = or 1 Mult. Prop. = Div. Prop. =

Module 2. Analysis of Statically Indeterminate Structures by the Matrix Force Method

1. Determine the Zero-Force Members in the plane truss.

Indeterminate Analysis Force Method 1

Problem 6.24 The Pratt bridge truss supports five forces ( F D 300 kn). The dimension L D 8m.Determine the axial forces in members BC, BI, and BJ.

ME Statics. Structures. Chapter 4

ENGR-1100 Introduction to Engineering Analysis. Lecture 23

Engineering Mechanics: Statics STRUCTURAL ANALYSIS. by Dr. Ibrahim A. Assakkaf SPRING 2007 ENES 110 Statics

1-2 Measuring and Constructing Segments

Lecture 23. ENGR-1100 Introduction to Engineering Analysis FRAMES S 1

CHAPTER 5 : THE STRAIGHT LINE


Physics 8 Friday, November 8, 2013

Answers Investigation 3

Parts Manual. EPIC II Critical Care Bed REF 2031

I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.

6.5 Cables: Concentrated Loads

MT225 Homework 6 - Solution. Problem 1: [34] 5 ft 5 ft 5 ft A B C D. 12 kips. 10ft E F G

Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.

In this chapter trusses, frames and machines will be examines as engineering structures.

SRSD 2093: Engineering Mechanics 2SRRI SECTION 19 ROOM 7, LEVEL 14, MENARA RAZAK

Newton s Third Law Newton s Third Law: For each action there is an action and opposite reaction F

NAME: Section: RIN: Tuesday, May 19, :00 11:00. Problem Points Score Total 100

1. Determine the Zero-Force Members in the plane truss.

Chapter 30 Design and Analysis of

Lecture 17 February 23, 2018

Pin-Jointed Frame Structures (Frameworks)

Chapter - 1. Equilibrium of a Rigid Body

Chapter 6 Summary 6.1. Using the Hypotenuse-Leg (HL) Congruence Theorem. Example

Method of Consistent Deformation

READING QUIZ. 2. When using the method of joints, typically equations of equilibrium are applied at every joint. A) Two B) Three C) Four D) Six

Lecture 0. Statics. Module 1. Overview of Mechanics Analysis. IDeALab. Prof. Y.Y.KIM. Solid Mechanics

ENGINEERING MECHANICS SOLUTIONS UNIT-I

Errata Sheet for S. D. Rajan, Introduction to Structural Analysis & Design (1 st Edition) John Wiley & Sons Publication

FRAMES AND MACHINES Learning Objectives 1). To evaluate the unknown reactions at the supports and the interaction forces at the connection points of a

CHAPTER 5 Statically Determinate Plane Trusses

The centroid of an area is defined as the point at which (12-2) The distance from the centroid of a given area to a specified axis may be found by

CHAPTER 5 Statically Determinate Plane Trusses TYPES OF ROOF TRUSS

Wahkiakum School District, Pre-EOC Geometry 2012

CHAPTER 2. Copyright McGraw-Hill Education. Permission required for reproduction or display.

Shear Force and Bending Moment Diagrams for a Beam Steven Vukazich San Jose State University

Point Equilibrium & Truss Analysis

UNIT 1 ANALYSIS OF STRUCTURES

STATICS VECTOR MECHANICS FOR ENGINEERS: Eleventh Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr. David F. Mazurek

If the solution does not follow a logical thought process, it will be assumed in error.

Outline: Frames Machines Trusses

Mathematics Secondary IV May May Practice Exam. Competency Two Uses Mathematical Reasoning. Science Option ANSWER KEY

T R U S S. Priodeep Chowdhury;Lecturer;Dept. of CEE;Uttara University//TRUSS Page 1

Calculating Truss Forces. Method of Joints

Lecture 17 February 23, 2018

Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.

STATICS. FE Review. Statics, Fourteenth Edition R.C. Hibbeler. Copyright 2016 by Pearson Education, Inc. All rights reserved.

WEDGE FRICTION. Rob Wendland, driving Mike Troxel's Federal-Mogul Dragster In-N-Out Burger

Vector Mechanics: Statics

CIV 207 Winter For practice

PROBLEM 5.1 SOLUTION. Reactions: Pb L Pa L. From A to B: 0 < x < a. Pb L Pb L Pb L Pbx L. From B to C: a < x < L Pa L. Pa L. L Pab At section B: M = L

J JUL - 25-JUL 2016 HOUSEHOLD FINANCES RESEARCH

0.3 m. 0.4 m. 0.3 m. A 2 kn. 0.4 m. tan γ = 7. (BC = kn) γ = Fx = BC cos θ + AC cos γ =0

Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.

ME C85 / CE C30 Midterm 1 Exam Monday October 4, 2010

Midterm Study Guide Assessment. Question 1. Find the angle measure. (28x + 14) (16x + 62) The measure of the angles are. 11/30/2018 Print Assignment

Chapter 2 Segment Measurement and Coordinate Graphing

STATICS. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS: Contents 9/3/2015

UNIT-V MOMENT DISTRIBUTION METHOD

Lecture 8: Flexibility Method. Example

International Mathematical Olympiad. Preliminary Selection Contest 2004 Hong Kong. Outline of Solutions 3 N

Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.

Proofs Practice Proofs Worksheet #2

8.1 Internal Forces in Structural Members

MEE224: Engineering Mechanics Lecture 4

Problem 7.1 Determine the soil pressure distribution under the footing. Elevation. Plan. M 180 e 1.5 ft P 120. (a) B= L= 8 ft L e 1.5 ft 1.

ES230 STRENGTH OF MATERIALS

GH Chapter 2 Test Review-includes Constructions

Structural Steel Design Project

EQUATIONS OF EQUILIBRIUM & TWO- AND THREE-FORCE MEMEBERS


Interstate 35W Bridge Collapse in Minnesota (2007) AP Photo/Pioneer Press, Brandi Jade Thomas

Pre-Test. Use the following figure to answer Questions 1 through 6. B C. 1. What is the center of the circle? The center of the circle is point G.

1-2 Measuring and Constructing Segments

Transcription:

\ COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 1. Joint FBDs: Joint B: FAB 800 lb F = = 1 8 17 BC so F = 100 lb T AB F = 1700 lb C BC Joint C: FAC Cx 1700 lb = = 8 1 17 F = 800 lb T AC

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 10. FBD Truss: Σ : H F x x B smmetr: A = H = 4 kips b inspection of joints C and G : F = F and F AC CE BC F = F and F EG GH FG Joint FBDs: Joint A: also, b smmetr F = F, F = F, F = F and F = F AB FH BD DF CE EG BE EF FAB FAC 3kips = = 4 3 so F =.00 kips C AB F = 4.00 kips T AC and, from above, F =.00 kips C FH Joint B: Joint E: and FCE = FEG = FGH = 4.00 kips T 4 4 10 Σ Fx : ( kips) FBE FBD= 0 109 3 3 3 Σ F 0: ( kips) = 2 F 0 109 BD + F BE = so FBD = 3.9772 kips, FBE.23810 kips or F BD = 3.98 kips C F BE.238 kips C and, from above, F DF = 3.98 kips C F EF.238 kips C 3 Σ F : FDE 2 (0.23810 kips) F.286 kips T DE

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 29. Σ : F F x x Then, b inspection of joint F, F FG Then, b inspection of joint G, F GH B inspection of joint J, F IJ Then, b inspection of joint I, F HI F Then, b inspection of joint E, F BE EI

\ COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 31. B inspection of joint C: F Then, b inspection of joint B : F Then, b inspection of joint E : F BC BE DE B inspection of joint H : F FH and F HI B inspection of joint Q : F OQ and F QR B inspection of joint J : F LJ

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 42. FBD Truss: Σ : 0 F x K ( ) ( ) x = Σ M : 6a K 12 lb a 20 lb A ( ) a( ) ( ) a( ) 4a 20 lb 3 37 lb 2a 00 lb 00 lb ( ) ( ) Σ F : A 320lb 200lb 37 lb 12 lb + 937. lb K = 937. lb FBD Section ABEC: A = 1312. lb ( ) FCF ( )( ) + ( 8 ft)( 20 lb 1312. lb) Σ M : 2ft + 4ft 00lb E F = 320 lb, F = 3.2 kips T CF 1 Σ F: 1312. lb 20 lb 2( 00 lb) FEF F = 62. lb, F = 139.8 lb T EF ( ) 2 Σ Fx: 320 lb + 62. lb FEG= 0 F = 337 lb, F = 3.38 kips C EG CF EG EF

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 0. FBD Truss: Distance between loads = 1. m Σ : A F x x FBD Section ABC: B smmetr, A = K = 18 kn FBD Section ABC: ( ) F ( )( ) ( )( ) Σ M : 1. m + 1. m 6 kn 3 m 18 kn 3 kn D CE 4 Σ MA : ( 1.8 m) FCD ( 1. m)( 6 kn) F = 22. kn T! CE F = 6.2 kn T! 8 4 Σ F : 18 kn 3 kn 6 kn FBD + ( 6.2 kn) 17 CD F = 29.8 kn C! BD

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 2. FBD Truss: Σ : A + 4 kips 4 kips F X x A x = B smmetr, A = N 0 FBD Section ABDC: ( )( ) ( ) 4 Σ MD : 18 ft 4 kips 9 ft FCE F = 10.00 kips C! CE ( )( ) ( ) 3 Σ ME : 18 ft 4 kips 12 ft FDF F DF = 10.00 kips C 4 Σ Fx : 4 kips + ( 10 kips 10 kips) FDE FBD Joint E: F = 4.00 kips C! DE 4 3 Σ F : FEF ( 4 kips) F = 3.00 kips T! EF

COSMOS: Complete Online Solutions Manual Organization Sstem Chapter 6, Solution 62. FBD Section above a-a: 27 Σ MG : (.9 m) FIK ( 2.7 m)( 40 kn) (.4 m)( 40 kn) 793 F = 7.27 kn, F = 7.3 kn C IK 27 Σ F : ( 7.27 kn FGJ) 793 F GJ = 7.27 kn T IK FBD Section ACIG: 27 Σ F : 7.27 kn 7.27 kn 793 ( ) 18 + ( F F ), F = F 949 HK HJ HJ HK 2 Σ Fx : 3( 40 kn) 2 FHK 949 F = 3.884 kn F = 3.9 kn C HK HK