N7S6 Ultra-ow oltage Buffer The N7S6X5T is an ultra high performance single Buffer fabricated in sub micron silicon gate 0.35 m technology with excellent performance down to 0.9. This device is ideal for extremely high speed and high drive applications. Additionally, limitations of board space are no longer a constraint. The very small SOT 553 makes this device fit most tight designs and spaces. The internal circuit is composed of three stages; including a buffered output which provides high noise immunity and stable output. The N7S6X5T input structure provides protection when voltages up to 3.6 are applied. Features Extremely High Speed:.5 ns (Typ) at CC = 3.3 Designed for 0.9 to 3.6 Operation Overvoltage Tolerance (OT)* Input Permits ogic Translation Balanced ±4 Output Drive @ 3.3 olts Near Zero Static Supply Current Ultra Tiny SOT 553 5 Pin Package Only.6 x.6 mm Footprint Ultra Tiny SOT 553 5 Pin Package, only.6 x.6 x mm These Devices are Pb Free and are RoHS Compliant Typical Applications Cellular Digital Camera PDA Digital ideo SOT 553 CASE 463B MARKING DIAGRAM UN M UN = Specific Device Code M = Date Code = Pb Free Package (Note: Microdot may be in either location) PSSIGNMENT PIN # FUNCTION NC 3 GND 4 OUT Y 5 CC FUNCTION TABE NC 5 CC Input A Output Y H H GND 3 4 OUT Y Figure. Pinout (Top iew) OUT Y ORDERING INFORMATION Device Package Shipping N7S6X5TG SOT 553 4000 / Tape & Reel (Pb Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD80/D. Figure. ogic Symbol *Overvoltage Tolerance (OT) enables input pins to function outside (higher) of their operating voltages, with no damage to the devices or to signal integrity. Semiconductor Components Industries, C, 04 May, 04 Rev. 5 Publication Order Number: N7S6X5T/D
N7S6 MAXIMUM RATINGS Symbol Rating alue Units CC DC Supply oltage 0.5 to +4.6 I DC Input oltage 0.5 to +4.6 O DC Output oltage 0.5 to CC + 0.5 I IK I OK DC Input Diode Current IN < 0 DC Output Diode Current OUT < 0 OUT > CC I O DC Output Sink Current ±50 I CC DC Supply Current per Supply Pin ±50 I GND DC Ground Current per Ground Pin ±50 T STG Storage Temperature Range 65 to +50 C T ead Temperature, mm from Case for 0 seconds 60 C T J Junction Temperature Under Bias +50 C JA Thermal Resistance (Note ) 50 C/W P D Power Dissipation in Still Air at 85 C 50 mw MS Moisture Sensitivity evel F R ESD Flammability Rating Oxygen index: 8 to 34 ESD Withstand oltage Human Body Model (Note ) Machine Model (Note 3) 50 50 +50 U 94 0 @ 05 in Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.. Measured with minimum pad spacing on an FR4 board, using 0 mm by inch, ounce copper trace no air flow.. Tested to EIA/JESD A4 A. 3. Tested to EIA/JESD A5 A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Units CC Positive DC Supply oltage 0.9 3.6 IN Digital Input oltage 0 3.6 out Output oltage 0 CC I OH /I O Output Current CC = 3.0 to 3.6 CC =.3 to.7 CC =.65 to.95 CC =.4 to.6 CC =. to.3 CC = 0.9 t A Operating Temperature Range. All Package Types 40 +85 C t r, t f Input Rise or Fall Time CC = 3.3 ± 0.3 0 0 Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 000 300 ±4 ±8 ±6 ±4 ± ± ns/
N7S6 DC CHARACTERISTICS Digital Section (oltages Referenced to GND) T A = 5 C T A = 40 to 85 C Symbol Parameter Condition CC Min Max Min Max Units IH High evel Input oltage 0.90.0 CC.30.40 CC.60.65 CC.95.70 CC 3.60.6.6 I ow evel Input oltage 0.90.0 CC.30.40 CC.60.65 CC.95.70 CC 3.60 OH High evel Output oltage I OH = 00 A 0.90.0 CC.30.40 CC.60.65 CC.95.70 CC 3.60 CC CC CC CC CC CC CC CC CC CC CC CC I OH =.0 CC.30 5 x CC 5 x CC I OH = 4.0.40 CC.60 5 x CC 5 x CC I OH = 6.0.65 CC.95 I OH =.70 < CC 3.60 I OH = 8.70 < CC 3.60.5.8..7.4.5.8..7.4 I OH = 4.70 CC 3.60.. O ow evel Output oltage I O = 00 A 0.90.0 CC.30.40 CC.60.65 CC.95.70 CC 3.60 I O =.0 CC.30 5 x CC 5 x CC I O = 4.0.40 CC.60 5 x CC 5 x CC I O = 6.0.65 CC.95 0.3 0.3 I O =.70 < CC 3.60 I O = 8.70 < CC 3.60 I IN I OFF I CC Input eakage Current Power Off eakage Current Quiescent Supply Current I O = 4.70 CC 3.60 0.55 0.55 0 = I = 3.6 0.90 to 3.60 ± ±0.9 A 0 5 A I = CC or GND 0.90 to 3.60 0.9 5 A 3
N7S6 AC CHARACTERISTICS (Input t r = t f = 3.0 ns) 40 C 5 C 85 C Symbol Parameter Condition CC Min Typ Max Min Max Units T PH, Propagation Delay C = 5 pf, R = M 0.90 0 ns T PH C = 5 pf, R = k.0 CC.30 6.0 3 6.9 ns.40 CC.60 3. 6. 7.0 C = 30 pf, R = 500.65 CC.95.70 CC 3.60. 5. 3.7 3.3 6. 4.4 3.8 ns C IN Input Capacitance 0 pf C OUT Output Capacitance 0 4.5 pf C PD Power Dissipation Capacitance I = 0 or CC F = 0 MHz 0.90 to 3.60 0 pf DEICE JUNCTION TEMPERATURE ERSUS TIME TO % BOND FAIURES Junction Temperature C Time, Hours Time, Years 80,03,00 7.8 90 49,300 47.9 00 78,700 0 79,600 9.4 0 37,000 4. 30 7,800 40 8,900 4
N7S6 PACKAGE DIMENSIONS SOT 553, 5 EAD CASE 463B ISSUE C D X 5 4 3 e E Y b 5 P 0.08 (0.003) M X Y A H E c NOTES:. DIMENSIONING AND TOERANCING PER ANSI Y4.5M, 98.. CONTROING DIMENSION: MIIMETERS 3. MAXIMUM EAD THICKNESS INCUDES EAD FINISH THICKNESS. MINIMUM EAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIA. MIIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX A 0.50 0.55 0 0.00 0.0 0.04 b 7 7 0.007 0.009 0.0 c 0.08 3 8 0.003 0.005 0.007 D.55.60.65 0.06 0.063 0.065 E.5.0.5 0.045 0.047 0.049 e 0.50 BSC 0.00 BSC 0 0 0.30 0.004 0.008 0.0 H E.55.60.65 0.06 0.063 0.065 RECOMMENDED SODERING FOOTPRINT* 0.3 0.08 5 0.077.35 0.053 0.0394 0.5 0.5 0.097 0.097 SCAE 0: mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SODERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, C (SCIC). SCIC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCIC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent Marking.pdf. SCIC reserves the right to make changes without further notice to any products herein. SCIC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCIC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCIC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCIC does not convey any license under its patent rights nor the rights of others. SCIC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCIC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCIC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCIC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCIC was negligent regarding the design or manufacture of the part. SCIC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBICATION ORDERING INFORMATION ITERATURE FUFIMENT: iterature Distribution Center for ON Semiconductor P.O. Box 563, Denver, Colorado 807 USA Phone: 303 675 75 or 800 344 3860 Toll Free USA/Canada Fax: 303 675 76 or 800 344 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800 8 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 4 33 790 90 Japan Customer Focus Center Phone: 8 3 587 050 5 ON Semiconductor Website: www.onsemi.com Order iterature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative N7S6X5T/D