Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for panel or plug-in mounting. Available with auxiliary contacts ( x N/O, x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. A choice of characteristic curves further extends the range of applications possibilities for these CBEs. Special auxiliary contact versions for industrial atmosphere and low voltages (e. g. 5 V) available on request. Approved to CBE standard EN 60934 (IEC 60934). Suitable for use in distribution rails see section Power Distribution Systems. Typical applications Process control equipment, robotics, machine tool control, communications systems, instrumentation, rail vehicles. Special versions, e.g. for aggressive environmental conditions and low voltages (e. g. 5 V) on request. Standard current ratings and typical internal resistance values Current rating (A) Internal resistance (Ω) F F M T M3 fast acting for DC only fast acting delay for AC+DC standard for AC+DC delayed low resistance only for AC standard delay 0. 6 6 9 8-0. 39.3 39.3 6. 4. - 0.3 7.5 7.5.6 0.4-0.4 9. 9. 6.6 6.0-0.5 6.8 6.8 4. 3.9-0.6 4. 4. 3.7-0.8.8.8.65.53 -.6.6.0 0.98 0.5.5 0.78 0.78 0.47 0.4 0. 0.4 0.4 0.8 0.4 0.36.5 0.6 0.6 0.83 0.7 0.083 3 0.8 0.8 0.4 0. 0.057 4 0. 0. 0.077 0.073 0.04 5 0.09 0.09 0.063 0.055 0.03 6 0.054 0.054 0.045 0.039 0.0 8 0.05 0.05 0.0 0.0 0.0 0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 6 0.0 0.0 0.0 0.0 0.0 0 - - 0.0 0.0-5 - - 0.0 0.0 - Preferred types Preferred types Standard current ratings (A) -pole: 4 6 8 0 6 0-S-PF-H- x x x x x 0-S-PM-H- x x x x x x x 0-S-PM-Z- x x x x x x x -pole: 0-S-PM-H- x x x x x x x 0-S-PM-H- x x x x x x x Technical data 0-S.. For further details please see chapter: Technical Information Voltage rating AC V*; 3 AC 433 V (-60Hz); (*UL: AC 77/480 V; ) Current rating range 0...5 A for curves M, T 0...6 A for curves F, F...6 A for curves M3 Auxiliary circuit A, AC 40 V/, resistive (min. 0 V / 0 ma) Typical life 0,000 operations at x I N, inductive Ambient temperature -30...+60 C (-...+40 F) T 60 Insulation co-ordination rated impulse pollution (IEC 60664 and 60664A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC 60664 and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC,0 V aux. circuit -/3-4 AC,000 V pole/pole AC,0 V Insulation resistance > 00 MΩ (DC 0 V) Interrupting capacity I cn 0...5 A 400 A 6...5 A 800 A curves F, F, M, T: 0...6 A,0A (at DC 3 V) curve M3:... A AC 00 A DC 400 A Interrupting capacity (UL 077) I N 0...6 A 0...5 A AC 77 V -pole 5,000 A,000 A AC 77/480 V -/3-pole 5,000 A,000 A,000 A,000 A Degree of protection operating area IP30 (IEC 6059/DIN 400) terminal area IP00 Vibration curves F, F: 3 g (57-0 Hz), ± 0.3 mm (0-57 Hz) curves M, M3, T: 5 g (57-0 Hz), ± 0.38 mm (0-57 Hz) to IEC 60068--6, test Fc 0 frequency cycles/axis Shock curves F, F: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 curves M, M3, T: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 to IEC 60068--7, test Ea Corrosion 96 hours in 5 % salt mist to IEC 60068--, test Ka Humidity 40 hours at 95 % RH to IEC 60068--78, test Cab Mass approx. g per pole 8 www.e-t-a.de
.787.97.945.49.44.49.059 Thermal-Magnetic Circuit Breaker 0-S... Ordering information Dimensions Type No. 0 single or multipole thermal-magnetic circuit breaker Mounting S socket or panel mounting Actuator design toggle Number of poles -pole protected -pole protected 3 3-pole protected Panel mounting with M3 thread Terminal design (main contacts) P blade terminals 6.3-0.8 (QC.) Characteristic curve F fast acting: therm..0-.4xi N ;magn.-4xi N DC (DC only) F fast acting: therm..0-.4xi N ; magn.3.5-6.5xi N AC/ 4.5-8.5xI N DC M standard delay: therm..0-.4xi N ; magn. 6-xI N AC;7.8-5.6xI N DC T delayed: therm..0-.4xi N ; magn. 0-0xI N AC M3 standard delay, low resistance: therm..4-.8xi N ; magn. 6-xI N AC; 7.8-5.6xI N DC Intermediate position H without intermediate position (standard) Z with intermediate position Auxiliary contacts with auxiliary contacts in all poles with auxiliary contacts in pole (only multipole devices) not suitable for Module 7plus Auxiliary contact function (see diagram) one each N/C and N/O (standard) 4 one N/C contact, closed in the intermediate and ON position (-Z only) Auxiliary contact - terminal design same as main terminals Current ratings 0...5 A 3.5.38 unit III unit II unit I OFF 9.748 3 4 A M 5 Z 0 0 0 5 43.69 6.8.68 ON 6x6.8 = 40.8 6x.68 =.6 A M A M 6.630.97 3.6 Cut-out dimensions 0 5.5.7 0.5.43.039 68.68 polarizing tooth 30.5.0 8.709.5.5.49.49 37.5.48 5.5.49.5.453 blade terminals DIN 4644-A6.3-0.8 (QC.) mounting thread M3 max. screw length 5.8 mm (.8 in.) tightening torque max. 0.5 Nm ø.433.47 multipole devices 0 - S - P F - H - 0 A ordering example Approvals Authority Standard Rated voltage Current ratings VDE IEC/EN 60934 3 AC 433 V AC V UL UL 077 AC 77/480 V AC 77 V CSA C. No 35 AC 77/480 V AC 77 V CQC GB 770 AC /433 V AC V GL IEC/EN 60934 3 AC 433 V AC V 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A 0. A 5 A 0. A 5 A 0. A 5 A 0. A 3 A 0. A 3 A 0. A 3 A 3.6 6.630 Installation drawing operating area (reinforced insulation) 5 36.6 4 ø4.57 ø.5.453 3-pole -pole -pole.5.5.5 90 ø.5.453 recess with panel thickness s >.5 mm (.059 in.) s 3 4 0 mounting area (standard insulation) This is a metric design and millimeter dimensions take precedence ( mm ) inch www.e-t-a.de 8
Thermal-Magnetic Circuit Breaker 0-S... Internal connection diagrams Typical time/current characteristics with auxiliary contact function (one each N/O and N/C) (...-H-...) without intermediate position (...-Z-...) with intermediate position (Z) 0 I line (Z) line (Z) line 3 0 I 3 0 I 3 4 4 OFF position Intermediate position ON position with auxiliary contact function 4 ( N/O, leading) (Z) 0 I line (Z) line (Z) line 3 0 I 3 0 I 3 4 OFF position Intermediate position ON position Toggle positions 4 OFF position intermediate position ON position Shock directions 5 6 4 4 3 4 -F 0. 6 A DC only 0000 000 00 0 0. 0.0 0.00 4 6 80 0 40 608000 -F 0. 7.5 A AC/ DC ) 0000 000 00 0 0. 0.0 0.00 4 6 80 0 40 608000 -F 8 6 A AC/ DC ) 0000 000 00 0 0. current rating 0.0 0.00 4 6 80 0 40 608000 +60 C +40 F +3 C +73.4 F -30 C - F ) Magnetic tripping currents are increased by 30 % on DC supplies. Multipole devices: all poles symmetrically loaded. With single pole overload, thermal tripping will be at max..7 x I N with curves F, F and M at max.. x I N with curve M3. The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section Technical information. Ambient F temp. C - -30-4 -0 +4-0 +3 0 +73.4 +3 +86 +30 +04 +40 + + +40 +60 Derating factor 0.76 0.79 0.83 0.88.04..9.9 8 www.e-t-a.de 3
Thermal-Magnetic Circuit Breaker 0-S... Typical time/current characteristics -M 0. 6 A AC/DC ) -M 8 5 A AC/DC ) -T 0. 6 A AC only 0000 0000 0000 000 000 000 00 0 0. 00 0 0. 00 0 0. 0.0 0.0 0.0 0.00 4 6 80 0 40608000 0.00 4 6 80 0 40608000 0.00 4 6 80 0 40608000 -T 8 5 A AC only 0000 -M3 5 A AC/DC ) -M3 6 6 A AC/DC ) 0000 0000 000 000 000 00 0 00 0 00 0 0. 0. 0. 0.0 0.0 0.0 0.00 4 6 80 0 40608000 0.00 4 6 80 0 40608000 0.00 4 6 80 0 40608000 The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section Technical information. Ambient F temp. C - -30-4 -0 +4-0 +3 0 +73.4 +3 +86 +30 +04 +40 + + +40 +60 Derating factor 0.76 0.79 0.83 0.88.04..9.9 Multi pole devices: all poles symmetrically loaded. With single pole overload, thermal tripping will be at max..7 x I N with curves F, F and M at max.. x I N with curve M3. ) Magnetic tripping currents are increased by 30% on DC supplies (curves F, M, M3). 4 www.e-t-a.de 8
.68.6.97.5.6.97.5.38.3.055.97.63.80.335 Thermal-Magnetic Circuit Breaker 0-S... Accessories Module 7plus For technical data see section Power Distribution Systems 47.85 4.5 68 0.5.67.64.43 slot for fitting labels from Phoenix, Weidmüller, Wieland 7 plus 57.4 Single mounting sockets (with adapter) (up to 6 A max. load) 7-P0-Si 7-P0-Si-005 7-P70-Si 7-P70-Si-005 (retaining clip Y 30 974 available on request) 8.5 polarized blade terminal DIN 4644-A6.3-0.8 (QC.) slot for fitting labels from Phoenix, Weidmüller depth 0 mm ( in.) 6.3.48 -P0 0 0 blade terminal DIN 4644 part C profile (xa.8-0.8) (QC x.0).8.0 -P70 0 retaining clip 63.48 slot for busbar Line Line 57.4 module 4.4.73 6.5.46 5 4.53 G-profile EN 035-G3 symmetrical rail EN 0-35x7.5 -way 6-way mounting socket mounting socket 3-P0-Si 63-P0-Si (up to 6 A max. load) (retaining clip Y 30 974 0 available on request) polarized recess 57.4 4.4.73 5.5.49 64 7.4.9 4 4 75.95.97.5.49 64 6 5 5.36 37.46.5.49 right-side terminal block left-side terminal block.079 max. 30 max..8 6.36 3.5 6 x 6.8 = 40.8 6 x.68 =.6 0 7.4 retaining.9 clip.87..874 6.8 5.8 polarization recess insulation to DIN 40-B translucent.5.49 7 ±.5.79 ±.060 5 busbar max. A Phoenix terminal AKG 35 max.cross section 35 mm (AWG ) symmetrical rail EN 0-35x7.5 adapter X004090 blade terminal DIN 4644 A6.3-0.8 (QC.), max. 5 A Outer dimensions of female connectors to 6.3- DIN 4647 Ms-gal Sn max. 6 A cylinder head screw washer M4x4 ISO07 A 4.3 DIN 5 nickel plated nickel plated polarized blade terminals DIN 4644-A6.3-0.8 (QC.) Bus bar A, 6-way, for type 63-P0-Si socket X 760 7 ±.5.79 ±.060 5 blade terminal DIN 4644 A6.3-0.8 (QC.), max. 5 A 8.35 33..3 insulation to DIN 40-B translucent.5.49 busbar max. A Outer dimensions of female connectors to 6.3- DIN 4647 Ms-gal Sn max. 6 A 9.354 5.4 5.3 4.9 7.669 6.5.56.0 3 80 3.5 (k) 4 (i) 33.3.4 5 4.3.5.49 Bus bar A (6-way) for type 7-P0-Si socket X 760 0 3 8.35 33..3 Bus bar (0-way) (supplied as a complete package) for type 7 socket (for max. 00 A continuous load), more positions available on request X 57 0 with terminal X 57 0 without terminal (k) 4 (i) 45.8 G-profile EN 035-G3.079 M4 0 female connector Cu rail, tin-plated 7.76.8.4 54.8 6.09 pressure-relief joint (. mm (.043 in.) thick constriction) Insulating sleeving for bus bar (0-way) Y 303 84 0 This is a metric design and millimeter dimensions take precedence ( mm ) inch 8 www.e-t-a.de 5
ø3.5 9.5 5.5.5 Thermal-Magnetic Circuit Breaker 0-S... Accessories Connector bus links -P0 X 0 588 0/.5 mm, (AWG 6), brown (up to 3 A max. load) X 0 588 0/.5 mm, (AWG 4), black (up to 0 A max. load) X 0 588 03/.5 mm, (AWG 4), red (up to 0 A max. load) X 0 588 04/.5 mm, (AWG 4), blue (up to 0 A max. load) Splash cover (transparent) with fixing plate and screws (IP54) for type 0-S- (-pole) X 7 0 ~70 ~.76 00 quick-connect tabs 6.3 (.) DIN 4647 tinned brass, insulated..047.87 ø6.8.66 3. 39.54 max. max.079 Toggle guard for -pole units, black X 67 0.47 R5.59.098 3.6.4 4.945 0.787 38. 3.6.866 R.47 For front panel mounting..039.38.7.374 Splash cover (transparent) with fixing plate and screws (IP54) for type 0-S- (-pole) and type 0-S3- (3-pole) X 8 0 38. fixing plate mounting hole 53 5 +0.3.09 +.0 43.69 fixing plate mounting holes ø7 +0,.87..047 3.6 4.5.965 9.748 max. 4 max.57 3.6 mounting dimensions: M3 - hole dia. 3.5 mm/.38 in. 40.57.669 +.008 3 ±0..6 ±.004 pole.6 ±0..496 ±.004 3pole 5. ±0. 3pole.99 ±.004 This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. 6 www.e-t-a.de 8