C2D112A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM RM = 12 12 V V ( =135 C) = 1 = 14.5 A A Q c = 61 nc 61 nc Q c Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on V F Benefits Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway Applications Package TO-22-2 PIN 1 PIN 2 CASE Switch Mode Power Supplies Power Factor Correction Motor Drives Part Number Package Marking C2D112A TO-22-2 C2D112 Maximum Ratings (=25 C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note RM Repetitive Peak Reverse Voltage 12 V SM Surge Peak Reverse Voltage 12 V V DC DC Blocking Voltage 12 V Continuous Forward Current 31 14.5 1 A =25 C =135 C =152 C RM Repetitive Peak Forward Surge Current 5 A =25 C, t P =1 ms, Half Sine Wave SM Non-Repetitive Peak Forward Surge Current 25 A =25 C, t P =1 µs, Pulse P tot Power Dissipation 312 135 W =25 C =11 C T J, T stg Operating Junction and Storage Temperature -55 to +175 C TO-22 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw 1 C2D112 Rev. F
Forward Current (A) I R Reverse Current (μa) Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note V F Forward Voltage 1.6 2.5 1.8 3. V = 1 A T J =25 C = 1 A T J =175 C I R Reverse Current 1 2 2 1 µa = 12 V T J =25 C = 12 V T J =15 C Q C Total Capacitive Charge 61 nc = 12 V, = 1 A di/dt = 5 A/µs T J = 25 C C Total Capacitance 1 8 59 pf = V, T J = 25 C, f = 1 MHz = 2 V, T J = 25 C, f = 1 MHz = 4 V, T J = 25 C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit R θjc Thermal Resistance from Junction to Case.48 C/W Typical Performance 2 2 18 18 16 16 14 14 12 12 1 1 8 8 6 6 4 4 2 2 1. 2. 3. 4. 5. V F Forward Voltage (V) 5 1 15 2 Reverse Voltage (V) Figure 1. Forward Characteristics Figure 2. Reverse Characteristics 2 C2D112 Rev. F
C Capacitance (pf) (AVG) Forward Current (A) (PEAK) Peak Forward Current (A) Typical Performance 1 35 9 325 3 8 7 6 5 4 3 1% Duty* 2% Duty* 3% Duty* 5% Duty* 7% Duty* DC Power Dissipation (W) P Tot (W) 275 25 225 2 175 15 125 1 2 75 1 25 5 75 1 125 15 175 Case Temperature ( C) * Frequency > 1KHz 5 25 25 5 75 1 125 15 175 Tc Case Temperature ( C) C Figure 3. Current Derating Figure 4. Power Derating 8 7 6 5 4 3 2 1 1 1 1 1 Reverse Voltage (V) Figure 5. Capacitance vs. Reverse Voltage 3 C2D112 Rev. F
4 C2D112 Rev. F Figure 6. Transient Thermal Impedance
Package Dimensions Package TO-22-2 POS Inches Millimeters Min Max Min Max A.381.41 9.677 1.414 B.235.255 5.969 6.477 Z C D A 1 2 J B E G F S T P Q U Y X C.1.12 2.54 3.48 D.223.337 5.664 8.56 E.59.615 14.986 15.621 F.143.153 3.632 3.886 G 1.15 1.147 28.67 29.134 H.5.55 12.7 13.97 L.25.36.635.914 M.45.55 1.143 1.397 N.195.25 4.953 5.27 H P.165.185 4.191 4.699 Q.48.54 1.219 1.372 L M N V W S 3 6 3 6 T 3 6 3 6 U 3 6 3 6 V.94.11 2.388 2.794 W.14.25.356.635 X 3 5.5 3 5.5 Y.385.41 9.779 1.414 z.13.15 3.32 3.81 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish Recommended Solder Pad Layout TO-22-2 Part Number Package Marking C2D112A TO-22-2 C2D112 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 C2D112 Rev. F
Notes RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 211/65/EC (RoHS2), as implemented January 2, 213. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright 213 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc. 46 Silicon Drive Durham, NC 2773 USA Tel: +1.919.313.53 Fax: +1.919.313.5451 www.cree.com/power 6 C2D112 Rev. F