SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30) Silicone rubber Rotor : Polyamide Pattern : Copper alloy, Gold-plated UL94V-0 UL94HB UL94V-0 Base Polyphenylenesulphide UL94V-0 Contact Terminal pin Copper alloy, Gold-plated PART NUMBER DESIGNATION Series name No. of positions 6 positions 2 positions Shape of rotor 0 With knob (with extended shaft) 2 S C - 0 0 T B Shape of terminal BGull wing ( type only) Blank : Through hole pin (Snap-in terminal pin) Form of packaging TTaping (Gull wing type only) W BlankBulk in plastic bag Code format Real code (Rotor color Yellow) 3Complementary code (Rotor color Red) Setting position 0 Side setting Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/ 2000 LIST OF PART NUMBERS Binary coded decimal Shape of rotor Form of packaging Real code (Rotor : Color Yellow) Complementary code (Rotor : Color Red) Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SC-20 SC-20W SC-2 SC-2W SC-22 SC-22W SC-20 SC-20W SC-2 SC-2W SC-22 SC-22W SC-20B SC-20WB SC-20TB SC-22B SC-22WB SC-22TB SC-2030 SC-2030W SC-230 SC-230W SC-2230 SC-2230W SC-203 SC-203W SC-23 SC-23W SC-223 SC-223W SC-2030B SC-2030WB SC-2030TB SC-2230B SC-2230WB SC-2230TB 500 pcs./reel 500 pcs./reel Binary coded hexadecimal Shape of rotor Form of packaging Real code (Rotor : Color Yellow) Complementary code (Rotor : Color Red) Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SC- SC-W SC- SC-W SC-2 SC-2W SC- SC-W SC- SC-W SC-2 SC-2W SC-B SC-WB SC-TB SC-2B SC-2WB SC-2TB SC-30 SC-30W SC-30 SC-30W SC-230 SC-230W SC-3 SC-3W SC-3 SC-3W SC-23 SC-23W SC-30B SC-30WB SC-30TB SC-230B SC-230WB SC-230TB 500 pcs./reel 500 pcs./reel Verify the above part numbers when placing orders. Taping and tray version can be supplied only in reel or tray units.
SC-00/ 2000 STANDARD SPECIFICATIONS ELECTRICAL CHARACTERISTICS Circuit type Operating temperature range Storage temperature range BCD (Real code, complementary code) BCH (Real code, complementary code) 40 ~ 85 C Contact rating Non-switching Switching Minimum DC50 V 0 ma DC5 V 0 ma DC20 mv μa Sealing Washable Please refer to page 50,5 Contact resistance Insulation resistance 0 m maximum 00 M (DC0 V) minimum Dielectric strength AC250 V, 60 s Net weight Without knob 0.63 g With knob 0.73 g Without knob Side setting 0.76 g With knob Side setting 0.86 g ENVIRONMENTAL CHARACTERISTICS MECHANICAL CHARACTERISTICS No. of positions 6 (SC-00), (SC-2000) Adjustment torque 4 ~ 20 mn m {4 ~ 204 gf cm} Stepping angle 22.5 (SC-00), 36 (SC-2000) Vibration Shock Humidity Load life High temperature exposure (Amplitude).5 mm or (Acceleration) 98 m/s 2, -500- Hz, 3 directions for 2 h each 490 m/s 2, ms 6 directions for 3 times each Resistance loaddc50v 0mA 40 C, Relative humidity 90 ~ 95 %, 240 h 20000 steps DC5 V, 0 ma 85 C, 96 h Terminal strength (Through hole pin only) N {.02 kgf} minimum Low temperature exposure 40 C, 96 h Stop strength (With knob only) N {.02 kgf}, s Thermal shock 40 (0.5 h) ~ 85 C ( 0.5 h ), 5 cycles Solderability Gull wing 245 ± 3 C, 2 ~ 3 s Reflow : Peak temperature 255 C (Please refer to the profile below.) Manual soldering350 ± C, 3 ~ 4 s Solvent resistance (Dipping) Solvent : IPA (Isopropyl alchol) Temperature : 23 ± 5 C Time : 5 ± 0.5 minutes Soldering heat Through hole pin Shear (Gull wing only) Substrate bending (Gull wing only) Pull-off strength (Gull wing only) Flow : 260 ± 3 C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board 5 ~ 6 s, two times maximum Manual soldering380 ± C, 3 ~ 4 s 5 N {0.5 kgf}, s Width 90 mm, bend 3 mm, 5 s, time 5 N {0.5 kgf}, s { } : Reference only Reflow profile for soldering heat evaluation Temperature () 250 200 50 0 50 80 50 +5 Peak : 250 0 Over 230 Pre Heating Zone 90 ± 30 s Heating time 30 ± s Soldering Zone Reflow : two times maximum
ABCDEF023456789 ABCDEF023456789 ABCDEF023456789 SC-00/ 2000 OUTLINE DIMENSIONS <Through hole pin, > SC- (Real code) SC-30 (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SC-20 (Real code) SC-2030 (Complementary code) 0.6 W 3.2 L.2 D 3.9 3.3±0.5.27 0.6 W 3.2 L.2 D 3.9 3.3±0.5.27 5 0.6 ± 0. 5 0.6 ± 0. SC-2 (Real code) SC-230 (Complementary code) SC-22 (Real code) SC-2230 (Complementary code) 0.6 W 3.2 L.5 D 3.9 3.3±0.5.27 0.6 W 3.2 L.5 D 3.9 3.3±0.5.27 5 0.6 ± 0. 5 0.6 ± 0. SC- (Real code) SC-30 (Complementary code) SC-2 (Real code) SC-230 (Complementary code) 0.7 W D 6.5 3.9 3.3±0.5.27 0.7 W D 6.5 3.9 3.3±0.5.27 φ 3.9 5 0.6 ± 0. 2 3 4 6 7 8 9 05 φ 3.9 5 0.6 ± 0.
23456780 SC-00/ 2000 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SC- (Real code) SC-3 (Complementary code) SC-20 (Real code) SC-203 (Complementary code) 0.6 W 3.2 L.2 D 6.8 0.6 W 3.2 L.2 D 6.8 6 7 8 9 2 3 4 50 0.6 ± 0. 3.3 2.54 0.6 ± 0. 3.3 2.54 SC-2 (Real code) SC-23 (Complementary code) SC-22 (Real code) SC-223 (Complementary code) 0.6 W 3.2 L.5 D 6.8 0.6 W 3.2 L.5 D 6.8 6 7 8 9 2 3 4 50 0.6 ± 0. 3.3 2.54 0.6 ± 0. 3.3 2.54 SC- (Real code) SC-3 (Complementary code) SC-2 (Real code) SC-23 (Complementary code) 0.7 W D 6.5 6.8 0.7 W D 6.5 6.8 9ABCDEF φ 3.9 φ 3.9 0.6 ± 0. 3.3 2.54 0.6 ± 0. 3.3 2.54
SC-00/ 2000 OUTLINE DIMENSIONS <Gull wing, > SC-B (Real code) SC-30B (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SC-20B (Real code) SC-2030B (Complementary code) 0.6 W 3.2 L.2 D 4.27 0.6 W 3.2 L.2 D 4.27 3 5 0.6 ± 0. 6 7 8 9 3 5 0.6 ± 0. 2 3 4 50 SC-2B (Real code) SC-230B (Complementary code) SC-22B (Real code) SC-2230B (Complementary code) 0.6 W 3.2 L.5 D 4.27 0.6 W 3.2 L.5 D 4.27 3 5 0.6 ± 0. 6 7 8 9 3 5 0.6 ± 0. 2 3 4 50 VARIOUS KNOBS
SC-00/ 2000 CODE FORMAT Code SC-00 series (6 positions) No. of positions SC-2000 series ( positions) Position 0 2 3 4 5 6 7 8 9 A B C D E F Real code Complementary code Contact closed 8 4 2 8 4 2 TERMINAL CONNECTION / P.C.B. THROUGH HOLE DIMENSIONS Side setting (Unit: mm) RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS Terminal pin layout (Bottom view) Real code Complementary code Operating face of real code Operating face of complementary code 8 4 2 8 4 2 8 4 2 8 4 2 C C C C 2.54.75 (4).5 0 2.54 ± 0. 5 φ 0.8 hole 2.54 ± 0. Operating face 5 φ 0.8 hole P.C.B. dimensions (Bottom view) 2.54 ± 0. ± 0. 2.54 ± 0. 5.75 SC-00/2000 case SC-00/2000 case
SC-00/ 2000 PACKAGING SPECIFICATIONS <Taping packaging specifications> Embossed tape dimensions Reel dimensions (Unit: mm) (In accordance with EIAJ ET-7200A) 25.4 ± End Empty Filled Empty Head 2 ± 0.5 φ 3 ± 0.2 φ 330 ± 2 φ 80 ± 40 mm min. 20 pitches min. Direction of feed 400 mm min. Part No. label φ 2 ± 0.8 29.4 ± (Unit: mm) (In accordance with EIAJ RC-09B) +0. φ.5 0 6 ± 0. 4 ± 0. 2 ± 0..5 ± 0..75 ± 0. 0.4 ± 0. 24 Direction of feed 4.8 < specifications> <Bulk pack specifications>