Data Sheet. DIP-Switch DAS. Technical Data. Dimensions. Order Number Configuration

Similar documents
Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.

High Voltage MLC Chips

Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life

High Voltage MLC Chips

Metallized Polypropylene Film Capacitor Related Document: IEC

Features. Type List. Ordering Information TPDT H

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification

1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)

TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS S-01

A wide variety of detector switches available for various Digital AV devices. Typical Specifications

Metallized Polypropylene Film Capacitor Related Document: IEC

PTF Series Long Life Slide Potentiometer

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life

Blocking Maximum rated values 1) Parameter Symbol Conditions 5SDF 28L4520 Unit Repetitive peak reverse voltage

Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications. Total resistance tolerance ±20%

Chapter 02. Voltage and Current. Atomic Theory Review. Atomic Theory Review. Atomic Theory Review. Electrical Charge.

PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..

Rectifier Diode 5SDD 11D2800

1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%

9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage

Protected. Main specifications. Additional specifications. Product adaptations

TF Series Miniature Snap-acting Switches

Metallized Polyester PCMT 369 film capacitors

1.4(H)mm, 1.5/2mm-travel Surface Mount Type. A low-profile slide switch with 1.4mm thickness. Typical Specifications

PRODUCT SPECIFICATION

High-Voltage Types Ordering Information, Mica Capacitors

S W I TC H MICRO SWITCH TOGGLE SWITCH PUSH BUTTON SWITCH SLIDE SWITCH VOLTAGE SELECTOR SWITCH ROCKER SWITCH ROTARY SWITCH STRUCTURE TERMINAL SPRING

PRODUCT SPECIFICATION

Applications SC

Military Qualified 10AT Series Snap Action Precision Position Switches

Pilkor components Metallized Polypropylene Film Capacitors PCPW 225 ( Switching Application ) APPLICATIONS

Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product

Specifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements

TF Series Miniature Snap-acting Switches

2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)

Distinctive Characteristics

5SJ4...-.HG Circuit Breakers to IEC and UL 489

Varius SUMMARY OF MODELS OF HRC FUSE-LINKS

Diode. A diode is an semiconductor component that, in general, will pass current in only one direction

Number of poles 1-pole 2-pole Minimum Enclosure Contact G2R-1A-E G2R-1-E

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life

Rotary Switches AC09, 16 and 32

Fig. 3. Actuator. Mounting Height. Color. Force. 160g. Gray g. Black g. Gray Fig.

AON V Common-Drain Dual N-Channel MOSFET

Discoidal Capacitors. Multilayer Discoidal

Asymmetric Gate turn-off Thyristor 5SGA 06D4502 PRELIMINARY

Issued August DATA SHEET. 3VT5 MCCB up to 1600 A

AT Series. High Temperature MLCC 200ºC & 250 C Rated HOW TO ORDER ELECTRICAL SPECIFICATIONS DIMENSIONS AT10

Type V DS I D R DS(on) Package Ordering Code BTS V 10 A 0.2 Ω TO-220AB C67078-A5008-A2

Type FCA Acrylic Surface Mount Film Capacitors

PHOENIX CONTACT - 04/2016. Features

resistance in the circuit. When voltage and current values are known, apply Ohm s law to determine circuit resistance. R = E/I ( )

Experiment ES Estimating a Second

3VT4 Molded Case Circuit Breakers up to 1000 A

Electronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.

The RC Time Constant

Max Q1. Symbol V GS I DM 15 I DSM 7.8 I AS E AS V SPIKE P D 2.5 P DSM. Junction and Storage Temperature Range T J, T STG

Exercise 2: Kirchhoff s Current Law/2 Sources

Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION

Lab #4 Capacitors and Inductors. Capacitor Transient and Steady State Response

Unit 2. ET Unit 2. Voltage, Current, and Resistance. Electronics Fundamentals Circuits, Devices and Applications - Floyd. Copyright 2009 Pearson

4 400 VDC 2W 450 VDC VDC H ±3 % J ±5 % 40 C to +105 C (450 VDC, 1.1 uf or more 40 C to +85 C) 400 VDC, 450 VDC, 630 VDC 400 VDC 450 VDC

2. A body that is positively charged is one that has an excess number of electrons.

Metallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B

MLCC APPLICATION GUIDE

Capacitors GOAL. EQUIPMENT. CapacitorDecay.cmbl 1. Building a Capacitor

MLCC APPLICATION GUIDE

13 Amp Programmable DC/DC Regulator PTK series. 3.3VDC, 5VDC, or 12VDC Input

PRODUCT SPECIFICATION FREQUENCY COMPONENTS. ZTB Series CERAMIC RESONATOR SPECIFICATION. MOBICON HOLDINGS LTD. Prepared By Sign.

Exercise 1: Capacitors

Chapter 2. Chapter 2

Issued August DATA SHEET. 3VT3 MCCB up to 630 A

WT 27 L-2 Laser Photoelectric proximity switches, background suppression -- DC. Dimensional drawing Adjustments possible WT 27L-2F 430

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers

EMI Suppression PCRC 420 film capacitors (RC unit)

5SDF 08H6005 PRELIMINARY

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/

MKP.g. 1.0 Rated Values and Operational Data

Blocking Maximum rated values 1) Parameter Symbol Conditions Value Unit. f = 50 Hz, t p = 10 ms, T vj = C f = 5 Hz, t p = 10 ms,

SIR MICHELANGELO REFALO

AOP606 Complementary Enhancement Mode Field Effect Transistor

Asymmetric Gate turn-off Thyristor 5SGA 15F2502

Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors

FEATURES STANDARD CONFIGURATION

15.1 Transformer Design: Basic Constraints. Chapter 15: Transformer design. Chapter 15 Transformer Design

AON V N-Channel MOSFET

E C K T H C K B

AO V Dual P + N-Channel MOSFET

AO4620 Complementary Enhancement Mode Field Effect Transistor

DIN Timers TD. Options and ordering codes. Specification

*Contents in this sheet are subject to change without prior notice.

Exercise 1: Thermistor Characteristics

Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15

FEATURES AND APPLICATIONS OF POLYMER THIN FILM MULTI-LAYER CAPACITOR PML CAP

Universal limit switches

Metal can, sealed time delay relay, with 2PDT output 25,8 x 25,8 x 25,7 mm maxi. Mating socket SRE 410, SME 410 STF 410 see page 9

FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components

Transcription:

DIP-Switch DS DIP-switch with to 0 positions Flat slides with protective foil or raised slides Contacts have self cleaning function Insulation resistance (at 00 VDC) Test voltage ( minute) switches (at.000 KHz) 00 mdc < 00 mω > 00 mω.000 operations -0... +0 C -... + C 0.. * (P-) 7.. 7. 9 a pre-heat temperature of 00 C max. for 0 s max. and DS-S/H DS-S/H DS-S/H DS-S/H DS-S/H DS-S/H DS-7S/H DS-S/H DS-9S/H DS-0S/H.0 mm. mm 9. mm. mm. mm. mm 9. mm. mm. mm. mm 7 9 0 DS circuit 0 isolated circuits 0 0 isolated circuits 0 Flat slides with protective foil Raised slides H D S - DS-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland

DIP-Switch DMS DIP-switch in SMT (Surface Mounted Technology) with,,, or positions Flat slides with protective foil or raised slides Contacts have self cleaning function Insulation resistance (at 00 VDC) Test voltage ( minute) switches (at.000 KHz) 00 mdc < 00 mω > 00 mω.000 operations -0... +0 C -... + C. 0.... * (P-) 7.0 0. 0. 7. 0.7 a pre-heat temperature of 00 C max. for 0 s max. and DMS-S/H DMS-S/H DMS-S/H DMS-S/H. mm. mm. mm. mm DMS isolated circuits 0 isolated circuits 0 isolated circuits 0 isolated circuits 0 Flat slides with protective foil Raised slides H D M S - DMS-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland

DIP-Switch DPS DIP-switch with,, or 0 positions Vertical mounting Different styles available ON = lever on upper position ON = lever on lower position Insulation resistance (at 00 VDC) Test voltage ( minute) switches (at.000 KHz) 00 mdc < 0 mω > 00 mω.000 operations -... + C ON 7 0.. * (P-) DPS - 9.. 7. 0.. a pre-heat temperature of 00 C max. for 0 s max. and DPS-E/B DPS-E/B DPS-E/B DPS-0E/B. mm 7. mm.70 mm 7.7 mm 0 DPS isolated circuits 0 isolated circuits 0 isolated circuits 0 0 isolated circuits 0 ON = lever on upper position E ON = lever on lower position B D P S - DPS-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland

DIP-Switch DPS-DS,, or double pole positions Double pole single throws (DPST) Vertical mounting Insulation resistance (at00 VDC) Test voltage ( minute) switches (at.000 KHz) 00 mdc < 0 mω > 00 mω.000 operations a pre-heat temperature of 00 C max. for 0 s max. and DPS-DS DPS-DS DPS-DS DPS-DS. mm 7. mm.70 mm 7.7 mm DPS x isolated circuits 0 x isolated circuits 0 x isolated circuits 0 x isolated circuits 0 Double pole single throws DPST DS D P S - D S DPS-DS-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland

DIP-Switch DTS DIP-switch with to 0 positions Flat slides with protective foil or raised slides Insulation resistance (at 00 VDC) Test voltage ( min.) switches (at.000 KHz) 00 mdc < 0 mω > 00 mω.000 operations DTS- 0.. * (P-) 7.. 0. 7. a pre-heat temperature of 00 C max. for 0 s max. and DTS-S/H DTS-S/H DTS-S/H DTS-S/H DTS-S/H DTS-S/H DTS-7S/H DTS-S/H DTS-9S/H DTS-0S/H. mm 7. mm 9. mm. mm.9 mm 7. mm 0.0 mm. mm. mm 7. mm 7 9 0 DTS circuit 0 isolated circuits 0 0 isolated circuits 0 Flat slides with protective foil S Raised slides H D T S - DTS-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland

DIP-Switch DTS-SD, DTS-DS DIP-switch with,,, or positions, each with isolated circuits Style SD: Single pole double throws (SPDT) Style DS: Double pole single throws (DPST) Insulation resistance (at00 VDC) Test voltage ( minute) switches (at.000 KHz) 00 mdc < 00 mω > 00 mω.000 operations a pre-heat temperature of 00 C max. for 0 s max. and DTS-SD/DS DTS-SD/DS DTS-SD/DS DTS-SD/DS DTS-SD/DS 7. mm. mm 7. mm. mm 7. mm DTS x isolated circuits 0 x isolated circuits 0 x isolated circuits 0 x isolated circuits 0 x isolated circuits 0 Single pole double throws SPDT SD Double pole single throws DPST DS D T S - DTS-DS-SD-DS-E-0.doc Kirchstrasse Page: () CH-9 Degersheim Switzerland