Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D 0.6.0 0. >.0.0 0.8 >.0 < 6. 6. MAIN APPLICATIONS Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. MARKING Manufacturer's logo/type/c-value/rated voltage/tolerance/ date of manufacture DIELECTRIC Polyester film ELECTRODES Vacuum deposited aluminum COATING Plastic-wrapped, epoxy resin sealed. Also available as flame retardant version. CONSTRUCTION Extended metallized film (refer to general information) LEADS Tinned wire IEC TEST CLASSIFICATION /0/6, according to IEC 60068 OPERATING TEMPERATURE RANGE - C to + 0 C RANGE 40pF to µf TOLERANCES ± 0% (M), ± % (K), ± % (J) TEST (ELECTRODE/ELECTRODE).6 x U R for s D Max. RATED S (U R ) 6 VDC, 0 VDC, 0 VDC, 400 VDC, 60 VDC, 00 VDC PERMISSIBLE AC S (RMS) UP TO 60Hz 40 VAC, 6 VAC, 60 VAC, 00 VAC, 0 VAC, 0 VAC INSULATION RESISTANCE Measured at 0 VDC (6 VDC series measured at 0 VDC) after one minute For C 0.µF and U R > 0 VDC 0,000 MΩ minimum value (60,000 MΩ typical value) For C 0.µF and U R 0 VDC,000 MΩ minimum value (0,000 MΩ typical value) TIME CONSTANT Measured at 0 VDC (6 VDC series measured at 0 VDC) after one minute For C > 0.µF and U R > 0 VDC,000 s minimum value (0,000 s typical value) For C > 0.µF and U R 0 VDC 000 s minimum value (,000 s typical value) DRIFT Up to + 40 C, ±.% for a period of two years DERATING FOR DC AND AC. CATEGORY U C At + 8 C: U C = U R At + 0 C: U C = 0.8 U R SELF INDUCTANCE ~ nh measured with 6mm long leads PULL TEST ON LEADS 0 N in direction of leads according to IEC 60068-- e RoHS COMPLIANT BEND TEST ON LEADS Two bends through 90 C with half of the force used in pull test RELIABILITY Operational life > 00,000 h Failure rate < FIT (40 C and 0. x U R ) For further details, please refer to the general information available at www.vishay.com/doc?60. MAXIMUM PULSE RISE TIME CAPACITOR Maximum Pulse Rise Time d v /d t [V/µs] LENGTH (mm) 6 VDC 0 VDC 0 VDC 400 VDC 60 VDC 00 VDC 8 6 84 4 66 9 8 6 6. 4 8 9 4. 4 6 4. If the maximum pulse voltage is less than the rated voltage higher d v /d t values can be permitted. Document Number: 60 For technical questions contact; dc-film@vishay.com www.vishay.com Revision: -Jun-0
MKT 8 Metallized Polyester Film Capacitor Related Document: IEC 6084- DISSIPATION FACTOR TAN δ MEASURED AT C µf µf < C µf C > µf khz 8 x - 8 x - x - khz x - x - 0kHz x - Maximum values 06 6 VDC/ 40 VAC 0 0 VDC/ 6 VAC 0 VDC/ 60 VAC 40 400 VDC/ 00 VAC 6* 60 VDC/ 0 VAC * 00 VDC/ 0 VAC D L D L D L D L D L D L 40pF - 4.0 680pF - 68.0 00pF -.0. 4.0 0pF -.0 6.0 4.0 00pF -.0 6.0 4.0 00pF -.0.0 4.0 400pF - 4.0 6.0 9.0 6800pF - 68.0 6.0 4.0 6.0 9.0 0.0µF -.0 6.0 4.0 6. 9.0 0.0µF -.0 6.0 4.0 6. 4.0. 9.0 0.0µF -.0 6.0 4.0. 4.0 9.0 9.0 0.0µF -.0 6.0 4.0 6. 9.0. 9.0 0.04µF - 4 6.0 4.0.0 4.0. 9.0 9.0 0.068µF - 68.0 6.0 4.0 8.0 4.0 8. 9.0 6. µf - 4.0 6.0 4.0.0 9.0. 9.0 6. 9. 9.0** µf - 4.0..0 4.0 8. 9.0.0 6... 0.µF - 4.0 6.0 4.0.0 9.0 8.0 6.. 6. 6.0. 8.0 9.0** 0.µF - 4 6.0 4.0 6.0 9.0 8.0 9.0 9. 6.. 6. 6.0 4. 9. 9.0** 0.4µF - 44.0 4.0 6. 9.0 9.0 9.0 6. 4.. 9.0 4. 4.0 6.** 0.68µF - 468 6. 9.0.0 9.0 8. 6... 4. 4. 9.0 9.0** µf -. 9.0 8. 9.0.0 6... 6. 4. www.vishay.com For technical questions contact; dc-film@vishay.com Document Number: 60 Revision: -Jun-0
Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8.µF - 06 6 VDC/ 40 VAC 0 0 VDC/ 6 VAC 0 VDC/ 60 VAC 40 400 VDC/ 00 VAC 6* 60 VDC/ 0 VAC * 00 VDC/ 0 VAC D L D L D L D L D L D L 8. 9.0 8.0 6.. 4.0 4. 8.0 9.0**.**.µF - 8. 6. 9. 6.. 6. 4.. 9.0** 9. 9.0**.µF -.0 6.. 6... 8. 9.0** 4.0 6.** 4.µF - 4. 6... 4. 4..** 6.8µF - 68. 4.0.. 4..0µF - 6 4.. 6.. 4...** µf - 6 8.0. 0...0µF - 6. 4. Further C-values upon request. PCM = L +. *Not suitable for mains applications. Please refer to X-capacitors in our catalog RFI Suppression Capacitors. **For the smaller size please add - M at the end of the type designation (e.g. MKT 8-/-M). Not CECC approved. RECOMMENDED PACKAGING LETTER TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING EXAMPLES G AMMO MKT 8-4-04-G X R REEL 0 MKT 8-4-04-R X BULK for L >.mm MKT 8-4-04 X Document Number: 60 For technical questions contact; dc-film@vishay.com www.vishay.com Revision: -Jun-0
MKT 8 Metallized Polyester Film Capacitor Related Document: IEC 6084-0 0. 0.4 4. 6 VDC 4. 0 0.068 0. 0.4. 4. 0 VDC 4 00 4.. 0.0 0 0 VDC 4 0. 0.04 00 0 400 VDC 4. 0.0068 0.4 0.0 0. 0.04 00 Capacitance in pf and µf 0.0 0.0 0.004 0. 0.00 0 60 VDC 4 40 0.00 00 0 0.0 0.04 0. 0.4 Capacitance in pf and µf 00 VDC 4 00 00 0.0 400 www.vishay.com For technical questions contact; dc-film@vishay.com Document Number: 60 4 Revision: -Jun-0
Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 900 www.vishay.com Revision: 08-Apr-0