DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60 μf 4-pin version available under request for pitch. mm, under request Material categorization: for definitions of compliance please see www.vishay.com/doc?999 Available APPLICATIONS Automotive DC filtering Low voltage DC link QUICK REFERENCE DATA Capacitance range 000 pf to 60 μf Capacitance tolerance ± 0 %, ± 0 %, ± % Climatic testing class according to IEC 60068- //6 Maximum application temperature C Reference standards IEC 6084- Dielectric Polyester film Electrodes Metallized Mono construction Construction Series construction (60 V and 000 V) Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Leads Tinned wire C-value; tolerance; rated voltage; code for dielectric material; Marking code for manufacturing origin; manufacturer s type designation; manufacturer's logo or name; year and week of manufacture Rated (DC) voltage 6 V DC, 00 V DC, 60 V DC, 0 V DC, 400 V DC, 60 V DC, 000 V DC Rated (AC) voltage 40 V AC, 6 V AC, 60 V AC, 00 V AC, 0 V AC 0 C at 0. U Maximum operating temperature for limited time R for maximum 00 h (not applicable for pitch. mm) Note For more detailed data and test requirements, contact dc-film@vishay.com DIMENSIONS in millimeters l w h l t = 6 - (other on request) 0.6 PCM ± 0.4 Ø d t Revision: 0-Feb-8 Document Number: 60

MKT80 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nf) 0. 0 4 00 000 6 0 000 4 4 66 CAPACITANCE (numerically) Example: 0 nf 400 nf 6 000 nf 0 000 nf 0. µf 4. µf 6 µf 0 µf SPECIAL LETTER FOR SIZE Standard version M Compact version SPECIAL LETTER FOR TAPED Bulk / Tray W Reel diameter 0 mm V Reel diameter 00 mm G Ammopack MKT 80 4 0 4 X X TYPE CONSTRUCTION METALLIZED POLYESTER VOLTAGE Un = 06 = 6 V DC Un = 0 = 00 V DC Un = 6 = 60 V DC Un = = 0 V DC Un = 40 = 400 V DC Un = 6 = 60 V DC Un = 0 = 000 V DC TOLERANCE 4 ± % ± 0 % 6 ± 0 % Notes For detailed tape specifications refer to packaging information www.vishay.com/docs?89 or end of catalog For PCM. mm, 4 pin versions are available under customer request SPECIFIC REFERENCE DATA DESCRIPTION VALUE Tangent of loss angle: at 00 Hz at khz at 0 khz at 00 khz C 0. μf - 80 x 0-4 0 x 0-4 0 x 0-4 0. μf < C.0 μf - 80 x 0-4 0 x 0-4 -.0 μf < C 0.0 μf x 0-4 0 x 0-4 - - 0.0 μf < C 00 μf 0 x 0-4 00 x 0-4 - - C > 00 μf 0 x 0-4 - - - PITCH MAXIMUM PULSE RISE TIME (du/dt) R [V/μs] 6 V DC 00 V DC 60 V DC 0 V DC 400 V DC 60 V DC 000 V DC 0 8-6 0 60 8 0-0 66 0. 6-8 8 68. 6 8 4 8 0. 0.8 - - -. 0. 0. 0.4 - - - If the maximum pulse voltage is less than the rated voltage higher du/dt values can be permitted. R between leads, for C 0. μf and U R 00 V > 000 M R between leads, for C 0. μf and U R > 00 V > 0 000 M RC between leads, for C > 0. μf and U R 00 V > 000 s RC between leads, for C > 0. μf and U R > 00 V > 0 000 s R between leads and case, 00 V; (foil method) > 0 000 M Withstanding (DC) voltage (cut off current 0 ma) () ; rise time < 000 V/s.6 x U RDC, min Withstanding (DC) leads and case x U RDC, min Maximum application temperature C Note () See Voltage Proof Test for Metalized Film Capacitors : www.vishay.com/doc?869 Revision: 0-Feb-8 Document Number: 60

MKT80 ELECTRICAL DATA U RDC (V) 6 CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l () PCM d t ± 0.08 mm ORDERING FOR 0 % TOL./BULK PACKING () 0. 4. x 8.0 x.0 0.0 MKT80406 0. 4. x 8.0 x.0 0.0 MKT80406 0.4 44. x 8.0 x.0 0.0 MKT804406 0.68 468 4.0 x 9.0 x.0 0.0 MKT8046806.0 0 4. x 9. x.0 0.0 MKT80006.. x 0. x.0 0.0 MKT8006. 6. x. x.0 0.0 MKT8006. 9.0 x. x.0 0.0 MKT8006M. 6. x. x 8.0.0 MKT8006 4. 4 9.0 x. x.0 0.0 MKT80406M 4. 4. x. x 8.0.0 MKT80406 6.8 68 8. x 4. x 8.0.0 MKT806806 0.0 60 8. x. x 8.0.0 0.80 MKT806006.0 6 8. x 6. x 6.. MKT80606.0 6 0. x 8. x 6.. MKT80606M 8.0 68 9.0 x 9.0 x.0. MKT806806.0 6.0 x.0 x.0. MKT80606.0 6.0 x.0 x.0. MKT80606.0 6.0 x.0 x.0. MKT80606 06 40 9.0 69.0 x.0 x.0. MKT806906 4.0 64.0 x.0 x.0. MKT806406 6.0 66 8.0 x 8.0 x.0. MKT806606 68.0 668 8.0 x 8.0 x.0. MKT8066806 8.0 68.0 x.0 x.0. MKT806806 00.0 0.0 x.0 x.0. MKT80006M 00.0 0 8. x. x 4.0. MKT80006 0.0 8. x. x 4.0. MKT8006 0.0 8. x. x 4.0. MKT8006 80.0 8. x 8. x 4.0..0 MKT80806 0.0 4.0 x 44.0 x 4.0. MKT8006M 0.0 0.0 x 4.0 x 4.0. MKT8006M 0.0 0.0 x 4.0 x 4.0. MKT8006M 0.0.0 x 4.0 x.. MKT8006 0.0.0 x 4.0 x.. MKT8006 0.0.0 x 4.0 x.. MKT8006. 90.0 9 0.0 x 4.0 x.. MKT80906 40.0 4.0 x 0.0 x.. MKT80406 60.0 6.0 x 0.0 x.. MKT80606 Notes () For tolerances see chapter Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances () Please replace by: 4 for % tolerance or 6 for 0 % tolerance Revision: 0-Feb-8 Document Number: 60

MKT80 ELECTRICAL DATA U RDC (V) 00 CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l () PCM d t ± 0.08 mm 0.068 68. x 8.0 x.0 0.0 MKT80680 0.0 40. x 8.0 x.0 0.0 MKT80400 0. 4. x 8.0 x.0 0.0 MKT8040 0. 4. x 8.0 x.0 0.0 MKT8040 0. 4 4.0 x 9.0 x.0 0.0 MKT8040 0.4 44 4. x 9. x.0 0.0 MKT80440 0.68 468. x 0. x.0 0.0 MKT804680.0 0. x 0. x.0 0.0 MKT8000M.0 0. x 0. x 8.0.0 MKT8000. 6. x. x 8.0.0 MKT800. 6. x. x 8.0.0 MKT800. 8. x 4. x 8.0.0 MKT800 4. 4 8. x 4. x 8.0.0 0.8 MKT8040M 4. 4. x. x 6.. MKT8040 6.8 68 8. x 6. x 6.. MKT80680 0.0 60 0. x 8. x 6.. MKT80600.0 6 0. x 8. x 6.. MKT8060M.0 6.0 x.0 x.0. MKT8060 8.0 68.0 x.0 x.0. MKT80680 0 6.0 6.0 x.0 x.0. MKT8060.0 6.0 x.0 x.0. MKT8060.0 6 8.0 x 8.0 x.0. MKT8060 9.0 69 8.0 x 8.0 x.0. MKT80690 4.0 64.0 x.0 x.0. MKT80640 6.0 66.0 x.0 x.0. MKT80660M 6.0 66 8. x. x 4.0. MKT80660 68.0 668 8. x. x 4.0. MKT806680 8.0 68 8. x. x 4.0. MKT80680 00.0 0. x 8. x 4.0..0 MKT8000 0.0 4.0 x 44.0 x 4.0. MKT800M 0.0 0.0 x 4.0 x 4.0. MKT800M 80.0 8 0.0 x 4.0 x 4.0. MKT8080M 0.0.0 x 4.0 x.. MKT800 0.0.0 x 4.0 x.. MKT800 80.0 8.0 x 4.0 x.. MKT8080. 0.0 0.0 x 4.0 x.. MKT800 0.0.0 x 0.0 x.. MKT800 0.0.0 x 0.0 x.. MKT800 Notes () For tolerances see chapter Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances () Please replace by: 4 for % tolerance or 6 for 0 % tolerance ORDERING FOR 0 % TOL./BULK PACKING () Revision: 0-Feb-8 4 Document Number: 60

MKT80 ELECTRICAL DATA U RDC (V) 60 0 CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l () PCM d t ± 0.08 mm 4. 4 9.0 x 9.0 x.0. MKT8046 6.8 68.0 x.0 x.0. MKT80686 0.0 60.0 x.0 x.0. MKT80606.0 6.0 x.0 x.0. MKT8066 0.8 8.0 68.0 x.0 x.0. MKT80686.0 6 8.0 x 8.0 x.0. MKT8066.0 6 8.0 x 8.0 x.0. MKT8066.0 6.0 x.0 x.0. MKT8066M.0 6 8. x. x 4.0. MKT8066 9.0 69 8. x. x 4.0. MKT80696 4.0 64 8. x. x 4.0. MKT80646 6 6 6.0 66. x 8. x 4.0. MKT80666.0 68.0 668. x 8. x 4.0. MKT806686 8.0 68 4.0 x 44.0 x 4.0. MKT80686M 00.0 0 0.0 x 4.0 x 4.0. MKT8006M 0.0 0.0 x 4.0 x 4.0. MKT806M 8.0 68.0 x 4.0 x.. MKT80686 00.0 0.0 x 4.0 x.. MKT8006 0.0.0 x 4.0 x.. MKT806. 0.0 0.0 x 4.0 x.. MKT806 80.0 8.0 x 0.0 x.. MKT8086 0.0.0 x 0.0 x.. MKT806 0.0. x 8.0 x.0 0.0 MKT80 0.0. x 8.0 x.0 0.0 MKT80 0.04 4. x 8.0 x.0 0.0 MKT804 0.068 68. x 8.0 x.0 0.0 MKT8068 0.0 40 4. x 9. x.0 0.0 MKT8040 0. 4. x 0. x.0 0.0 MKT804 0. 4 6. x. x.0 0.0 MKT804 0. 4 6. x. x.0 0.0 MKT804M 0. 4 60. x 0. x 8.0.0 0.8 MKT804 0.4 44 9.0 x. x.0 0.0 MKT8044M 0.4 44 6. x. x 8.0.0 MKT8044 0.68 468. x. x 8.0.0 MKT80468.0 0 8. x 4. x 8.0.0 MKT800. 0. x, x 8.0.0 MKT80M. 8. x 6. x 6.. MKT80. 0. x 8. x 6.. MKT80.. x 0.0 x 6.. MKT80 Notes () For tolerances see chapter Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances () Please replace by: 4 for % tolerance or 6 for 0 % tolerance ORDERING FOR 0 % TOL./BULK PACKING () Revision: 0-Feb-8 Document Number: 60

MKT80 ELECTRICAL DATA U RDC (V) 0 400 CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l () PCM d t ± 0.08 mm 4. 4.0 x.0 x.0. MKT804 6.8 68.0 x.0 x.0. MKT8068 0.0 60.0 x.0 x.0. 0.8 MKT8060.0 6 8.0 x 8.0 x.0. MKT806 8.0 68.0 x.0 x.0. MKT8068M 8.0 68 8. x. x 4.0. MKT8068.0 6 8. x. x 4.0. MKT806.0 6 8. x. x 4.0. MKT806.0 6. x 8. x 4.0. MKT806 00.0 9.0 69. x 8. x 4.0. MKT8069 4.0 64 4.0 x 44.0 x 4.0. MKT8064 6.0 66 0.0 x 4.0 x 4.0. MKT8066M 68.0 668 0.0 x 4.0 x 4.0. MKT80668M 6.0 66.0 x 4.0 x.. MKT8066 68.0 668.0 x 4.0 x.. MKT80668 8.0 68.0 x 4.0 x... MKT8068 00.0 0 0.0 x 4.0 x.. MKT800 0.0.0 x 0.0 x.. MKT80 0.00 0. x 8.0 x.0 0.0 MKT80040 0.0. x 8.0 x.0 0.0 MKT8040 0.0. x 8.0 x.0 0.0 MKT8040 0.0 4.0 x 9.0 x.0 0.0 MKT8040 0.04 4 4. x 9. x.0 0.0 MKT80440 0.068 68. x 0. x.0 0.0 MKT806840 0.0 40 6. x. x.0 0.0 MKT804040 0. 4 9.0 x. x.0 0.0 MKT80440M 0. 4 6. x. x 8.0.0 MKT80440 0. 4 9.0 x. x.0 0.0 MKT80440M 40 00 0.8 0. 4 6. x. x 8.0.0 MKT80440 0. 4. x. x 8.0.0 MKT80440 0.4 44 8. x. x 8.0.0 MKT804440 0.68 468 8. x 6. x 6.. MKT8046840.0 0 0. x 8. x 6.. MKT80040..0 x.0 x 6., MKT8040M..0 x.0 x.0. MKT8040.. x. x.. MKT8040. x 4. x.. MKT8040 4. 4 8.0 x 8.0 x.. MKT80440 Notes () For tolerances see chapter Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances () Please replace by: 4 for % tolerance or 6 for 0 % tolerance ORDERING FOR 0 % TOL./BULK PACKING () Revision: 0-Feb-8 6 Document Number: 60

MKT80 ELECTRICAL DATA U RDC (V) CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS w x h x l () 0.000 0. x 8.0 x.0 0.0 MKT8006 0.00. x 8.0 x.0 0.0 MKT806 0.00. x 8.0 x.0 0.0 MKT806 0.00. x 8.0 x.0 0.0 MKT806 0.004 4. x 8.0 x.0 0.0 MKT8046 0.0068 68. x 8.0 x.0 0.0 MKT80686 0.00 0 4.0 x 9.0 x.0 0.0 MKT8006 0.0 4. x 9. x.0 0.0 MKT806 0.0. x 0. x.0 0.0 MKT806 0.0 6. x. x.0 0.0 MKT806M 0.0. x 0. x 8.0.0 MKT806 60 0.04 4 6 0 6. x. x.0 0.0 0.80 MKT8046M 0.04 4 6. x. x 8.0.0 MKT8046 0.068 68. x. x 8.0.0 MKT80686 0.0 40. x. x 8.0.0 MKT80406M 0.0 40 6. x 4. x 6.. MKT80406 0. 4. x. x 6.. MKT8046 0. 4 8. x 6. x 6.. MKT8046 0. 4.0 x.0 x.0. MKT8046 0.4 44.0 x.0 x.0. MKT80446 0.68 468. x. x.. MKT804686.0 0.0 x 4. x.. MKT8006. 8.0 x 8.0 x.. MKT806 0.000 0 4.0 x 9.0 x.0 0.0 MKT8000 0.00 4.0 x 9.0 x.0 0.0 MKT800 0.00 4.0 x 9.0 x.0 0.0 MKT800 0.00 4.0 x 9.0 x.0 0.0 MKT800 0.004 4. x 0. x.0 0.0 MKT8040 0.0068 68 6. x. x.0 0.0 MKT80680 0.00 0. x 0. x 8.0.0 MKT8000 0.0 6. x. x 8.0.0 MKT800 000 0.0. x. x 8.0.0 MKT800 0 0 0.80 0.0 8. x 4. x 8.0.0 MKT800M 0.0 6. x 4. x 6.. MKT800 0.04 4. x. x 6.. MKT8040 0.068 68 8. x 6. x 6.. MKT80680 0.0 40 0. x 8. x 6.. MKT80400 0. 4.0 x.0 x.0. MKT8040 0. 4. x. x.. MKT8040 0. 4 6. x 9. x.. MKT8040 0.4 44 0.0 x.0 x.. MKT80440 Notes () For tolerances see chapter Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances () Please replace by: 4 for % tolerance or 6 for 0 % tolerance PCM d t ± 0.08 mm ORDERING FOR 0 % TOL./BULK PACKING () RECOMMENDED PACKAGING PACKAGING TYPE OF PACKAGING HEIGHT (H) REEL DIAMETER/ BOX SIZE ORDERING EXAMPLES PITCH 0 PITCH PITCH. TO. PITCH. TO. G Ammo 8. x 0 x 40 MKT804040G x x - - W Reel 8. 0 MKT804040W x x - - V Reel 8. 00 MKT8046V - x x - G Ammo 8. 60 x 60 x 0 MKT8046G - - x - - Bulk - - MKT8040 x x x x Revision: 0-Feb-8 Document Number: 60

MKT80 EXAMPLE OF ORDERING TYPE CAPACITANCE VOLTAGE TOLERANCE () PACKAGING MKT80 40 06 G MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/docs?89 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. For pitches mm the capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clamped SPACE REQUIREMENTS FOR PRINTED-CIRCUIT BOARD APPLICATIONS AND DIMENSION TOLERANCES For the maximum product dimensions and maximum space requirements for length (I max. ), width (w max. ), and height (h max. ) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below: For products with pitch mm, w = l = 0. mm, and h = 0. mm For products with mm < pitch. mm, w = l = 0. mm, and h = 0. mm For products with pitch =. mm, w = l = 0. mm, and h = 0. mm For products with pitch =. mm, w = l =.0 mm, and h = 0. mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Eccentricity w max. = w + Δw I max. = I + ΔI CBA6 h max. = h + Δh For the minimum product dimensions for length (l min. ), width (w min. ), and height (h min. ) following tolerances of the components are valid: l min. = l - l, w min. = w - w, and h min. = h - h following For products with pitch 0 mm, l = 0. mm, and w = h = 0. mm For products with pitch = mm, l = 0. mm, and w = h = 0. mm For products with mm < pitch. mm, l =.0 mm. and w = h = 0. mm For products with pitch =. mm, l =.0 mm, and w = h =.0 mm For products with pitch =. mm, l =. mm, and w = h =.0 mm SOLDERING CONDITIONS Seating plane For general soldering conditions and wave soldering profile, we refer to the application note: Soldering Guidelines for Film Capacitors : www.vishay.com/doc?8 Storage Temperature T stg = - C to + C with RH maximum % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free temperature of C ± C, an atmospheric pressure of 86 kpa to 06 kpa and a relative humidity of 0 % ± %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 0 %. Revision: 0-Feb-8 8 Document Number: 60

MKT80 CHARACTERISTICS PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT T amb 8 C V RMS 00 Capacitance in µf 000 V RMS Capacitance in µf 0 0. 0.68.. 6.8 68 0 60 00 6.8 0.0 0. 0. 0.4 6 V DC 0 0 0 4 0 68 0 6 VDC V DC 0 0 0 4 0 0. V RMS 00 0. Capacitance in μf 000 V RMS Capacitance in µf 0 0. 0.68.. 0 4 00 0 00. 0.04 0. 0. 0.4 0.0 0.0 00 V DC 0 0 0 4 0 400 V DC 0 0 0 4 0 V RMS 00 4. Capacitance in µf 000 V RMS Capacitance in pf and µf 0 8 000 0 4 0 00.0 00 400 0.0 0.0 0.04 0. 0. 0.4 0 60 V DC 0 0 0 4 0 60 V DC 0 0 0 4 0 Revision: 0-Feb-8 9 Document Number: 60

MKT80 CHARACTERISTICS PERMISSIBLE AC VOLTAGE VS. FREQUENCY AT T amb 8 C 000 V RMS Capacitance in pf and µf 000 00 0. 0. 0.4 0.04 00 400 0.0 0.0 000 V DC 0 0 0 4 0 CHARACTERISTICS Factor..0 0.8 0.6 0.4 0. 0.0-60 - 0 40 90 T amb ( C) 40 Nominal voltage (AC and DC) as a function of temperature ΔC C = (%) 0 8 6 4 0 - -4-6 -8-60 -40-0 0 0 40 60 80 00 0 40 Capacitance vs. Temperature ΔC/C = f (ϑ) Capacitance as a function of temperature (typical curve) T amb ( C) ΔC C = (%) 0 tan δ = 0-6 4 - - - -4 - -6 0 0 0 4 0 Capacitance Change vs. Frequency ΔC = f (f) C Capacitance as a function of frequency (typical curve) 0 8 6 4 0-60 -40-0 0 0 40 60 80 00 0 40 Dissipation Factor ( khz) vs. Temperature tan δ = f (ϑ) T amb ( C) Dissipation factor as a function of temperature (typical curve) Revision: 0-Feb-8 0 Document Number: 60

MKT80 RC (s) 0 0 4 0 0 0 0 0 0 40 60 80 00 T amb ( C) Insulation resistance as a function of temperature (typical curve) 6 tan δ x 0 4 00 0 0. 0 0 0 4 0 Dissipation Factor vs. Frequency tan δ = f (f) Dissipation factor as a function of frequency (typical curve) ΔT (K) 4 0 8 6 4 0-60 -40-0 0 0 40 60 80 00 0 40 T amb ( C) Maximum allowed component temperature rise (T) as function of ambient temperature (T amb ) Revision: 0-Feb-8 Document Number: 60

MKT80 HEAT CONDUCTIVITY (G) AS A FUNCTION OF CAPACITOR BODY THICKNESS IN mw/ C W max. HEAT CONDUCTIVITY (mw/ C) PITCH 0.0 mm PITCH.0 mm PITCH. mm PITCH. mm PITCH. mm PITCH. mm..0 - - - - - 4.0 6.0 - - - - - 4..0 - - - - -. 8.0 0.0 - - - - 6. 0.0.0 0.0 - - -. -.0.0 - - - 8. - 6.0 4.0 - - - 9.0 - - -.0 - - 0. - - 0.0 - - -.0 - - - 8.0 - -. - - - 8.0 - -. - - 4.0 - - -.0 - - - 4.0 - -. - - - 4.0 - -.0 - - - 0.0 - - 6. - - - 8.0 - - 8.0 - - - 60.0 - - 8. - - - - 90.0-0.0 - - -.0 - -.0 - - - 0.0 - -. - - - - 0.0-4.0 - - - - 8.0 -.0 - - - - -.0 0.0 - - - -.0 0.0.0 - - - - - 00.0 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: T = component temperature rise ( C) with a maximum of C P = power dissipation of the component (mw) G = heat conductivity of the component (mw/ C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (T amb ) and maximum loaded condition (T C ). The temperature rise is given by T = T C - T amb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. Revision: 0-Feb-8 Document Number: 60

MKT80 APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked:. The peak voltage (U P ) shall not be greater than the rated DC voltage (U RDC ). The peak-to-peak voltage (U P-P ) shall not be greater than the maximum (U P-P ) to avoid the ionization inception level. The voltage peak slope (du/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by U RDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: x T 0 du ------- dt x dt U x du ------- NDC dt rated T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits (see graph Max. allowed component temperature rise ).. Since in circuits used at voltages over 80 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 00 times the values mentioned in the table: Heat conductivity 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included).. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact dc-film@vishay.com. VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES T amb 8 C 8 C < T amb 00 C 00 C < T amb C Maximum continuous RMS voltage U RAC 0.8 x U RAC 0. x U RAC Maximum temperature RMS-overvoltage (< 4 h). x U RAC U RAC 0.6 x U RAC Maximum peak voltage (V O-P ) (< s).6 x U RDC. x U RDC 0. x U RDC Revision: 0-Feb-8 Document Number: 60

MKT80 INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, Publication IEC 6084- and Specific Reference Data. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP CA PART OF SAMPLE OF SUB-GROUP C 4. Dimensions (detail) As specified in chapter General Data of this specification 4.. Initial measurements Capacitance Tangent of loss angle: for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz 4. Robustness of terminations Tensile and bending No visible damage 4.4 Resistance to soldering heat Method: A Solder bath: 80 C ± C Duration: 0 s 4.4 Component solvent resistance Isopropylalcohol at room temperature Method: Immersion time: min ± 0. min Recovery time: min. h, max. h 4.4. Final measurements Visual examination No visible damage Legible marking Capacitance Tangent of loss angle SUB-GROUP CB PART OF SAMPLE OF SUB-GROUP C 4.6. Initial measurements Capacitance Tangent of loss angle: for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz 4.6 Rapid change of temperature A = - C B = + C cycles Duration t = 0 min Visual examination 4. Vibration Mounting: see section Mounting of this specification Procedure B4 Frequency range: 0 Hz to Hz Amplitude: 0. mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h C/C % of the value measured initially Increase of tan : 0.00 for C μf or 0.00 for C > μf 0.004 for C 00 μf Compared to values measured in 4.. No visible damage Legible marking 4.. Final inspection Visual examination No visible damage 4.9 Shock Mounting: see section Mounting for more information Pulse shape: half sine Acceleration: 490 m/s Duration of pulse: ms Revision: 0-Feb-8 4 Document Number: 60

MKT80 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP CB PART OF SAMPLE OF SUB-GROUP C 4.9. Final measurements Visual examination No visible damage SUB-GROUP C COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS CA AND CB 4.0 Climatic sequence Capacitance Tangent of loss angle for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz Insulation resistance C/C % of the value measured in 4.6. Increase of tan : 0.00 for C μf or 0.00 for C > μf 0.004 for C 00 μf Compared to values measured in 4.6. As specified in section Insulation Resistance of this specification 4.0. Dry heat Temperature: + C Duration: 6 h 4.0. Damp heat cyclic Test Db, first cycle 4.0.4 Cold Temperature: - C Duration: h 4.0.6 Damp heat cyclic Test Db, remaining cycles 4.0.6. Final measurements Voltage proof = U RDC for min within min after removal from testchamber Visual examination Capacitance Tangent of loss angle for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz Insulation resistance No breakdown or flashover No visible damage Legible marking C/C % of the value measured in 4.4. or 4.9. Increase of tan : 0.00 for C μf or 0.00 for C > μf 0.004 for C 00 μf Compared to values measured in 4.. or 4.6. 0 % of values specified in section Insulation Resistance of this specification SUB-GROUP C 4. Damp heat steady state 6 days; 40 C; 90 % to 9 % RH 4.. Initial measurements Capacitance Tangent of loss angle for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz 4.. Final measurements Voltage proof = U RDC for min within min after removal from testchamber Visual examination No breakdown or flashover No visible damage Legible marking Revision: 0-Feb-8 Document Number: 60

www.vishay.com MKT80 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C 4.. Final measurements Capacitance C/C % of the value measured in 4... Tangent of loss angle for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz Insulation resistance SUB-GROUP C 4. Endurance Duration: 000 h. x U RDC at 8 C.0 x U RDC at 00 C 0.6 x U RDC at C Duration: 00 h 0. x U RDC at 0 C (not applicable for pitch. mm) Increase of tan 0.00 for C μf or 0.00 for C > μf 0.004 for C 00 μf Compared to values measured in 4.. 0 % of values specified in section Insulation Resistance of this specification 4.. Initial measurements Capacitance Tangent of loss angle: for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz 4.. Final measurements Visual examination No visible damage Legible marking Capacitance Tangent of loss angle For C μf at 0 khz For μf < C < 00 μf at khz For C 00 μf at 00 Hz Insulation resistance SUB-GROUP C4 4. Charge and discharge 0 000 cycles Charged to U RDC Discharge resistance: R = U R ----------------------------------------------- C x K x du dt R K = for pitch. mm K =. for pitch. mm/. mm C/C % compared to values measured in 4.. Increase of tan : 0.00 for C μf or 0.00 for μf < C < 00 μf 0.004 for C 00 μf Compared to values measured in 4.. 0 % of values specified in section Insulation Resistance of this specification 4.. Initial measurements Capacitance Tangent of loss angle: for C μf at 0 khz for μf < C < 00 μf at khz for C 00 μf at 00 Hz 4.. Final measurements Capacitance C/C % compared to values measured in 4.. Tangent of loss angle: Insulation resistance Increase of tan : 0.00 for C μf or 0.00 for C > μf 0.004 for C 00 μf Compared to values measured in 4.. 0 % of values specified in section Insulation Resistance of this specification Revision: 0-Feb-8 6 Document Number: 60

Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 0 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb- Document Number: 9000