PART III DRAWINGS AND PHOTOGRAPHS Note: Drawings are intended to be as accurate as possible; however, Contractor is responsible for insuring that all items will fit as shown.
Bulkhead DRIVER SIDE Bulkhead and items A-F supplied by City A B C D E F EZ-Cube shelf (Weatherguard #9452-3-01), with eight dividers (Weatherguard #8401-3-01) Parts cabinet (Weatherguard #8909-3) Shelf bin boxes (Weatherguard #8125) Jumbo shelf (Weatherguard #8443-3-01) with accessory back panel (Weatherguard #8935-3-01, eight (8) dividers (Weatherguard #8112-3-01) and retainer lip (Weatherguard #8802-3-01) Two-drawer cabinet (Weatherguard 8902-3), with accessory mounting kit (Weatherguard #7220) Drawer unit (Weatherguard 301-3) Pack Rat City of Palo Alto Project Nr: VR-09000-824 Dwg Nr: 1-DS Dwg Date: 5/3/2010 Vehicle Nr: 7835 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead Bulkhead and items A-E supplied by City PASSENGER SIDE A B C D E Drawer unit (Weatherguard 301-3) Pack Rat (also referenced on drawing 1-DS) Steel work top (Weatherguard #8867-3-01) Two-drawer cabinet (Weatherguard 8902-3) Wheel well base cabinet (Weatherguard 8141-3-01) Rack unit (Weatherguard 8314-3-1), mounted so that shelves are accessed from rear doors City of Palo Alto Project Nr: VR-09000-824 Dwg Nr: 1-PS Dwg Date: 5/3/2010 Vehicle Nr: 7835 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead 12.5 36.0 E 18.0 18.0 6.0 36.0 18.0 18.0 18.0 Bulkhead and items A-I supplied by City A B C D E F G H I Catalog file (Weatherguard 8361-3) Open tray, 36"W X 12"D with 2"H sides Welded stack unit (Weatherguard 8230-3-01) Drawer unit (Weatherguard 8918-3) Wheel well base cabinet (Weatherguard 8141-3-01) 30" tall shelf unit (Weatherguard 8320-3-01) with tall dividers Four-drawer unit (Weatherguard 8914-3), 18 deep. Mount on 1" high spacer. (Adrian Steel equivalent) Two-shelf cabinet (Weatherguard 8310-3), 18" deep. Mount on 1" high spacer. Rack unit (Weatherguard 8415-3-01), with two shelves. Provide cargo netting or retaining straps for each individual section. City of Palo Alto Project Nr: VR-09000-828,VR-09000-833 Dwg Nr: 2-DS Dwg Date: 4/20/2010 Vehicle Nr: 8015, 7014 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead* Bulkhead and items A-E supplied by City A B C D E EZ-Cube shelf (Weatherguard #9452-3-01), with eight dividers (Weatherguard #8401-3-01) Parts cabinet (Weatherguard #8909-3)* Accessory shelf door (Weatherguard #8503-3-01) Two-shelf cabinet (Weatherguard #8312-3) Drawer unit (Weatherguard 8904-3) City of Palo Alto Project Nr: VR-09000-841 Dwg Nr: 3-DS Dwg Date: 5/3/2010 Vehicle Nr: 3735 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead* Bulkhead and items A-D supplied by City PASSENGER SIDE A B C D Steel work top (Weatherguard #8867-3-01)* Four-drawer cabinet (Weatherguard 8901-3)* Wheel well base cabinet (Weatherguard 8141-3-01)* Tank rack unit (Weatherguard 8881-3)* City of Palo Alto Project Nr: VR-09000-841 Dwg Nr: 3-PS Dwg Date: 5/3/2010 Vehicle Nr: 3735 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead Install two 12 volt outlets in this area 12.5 36.0 26.5 42.0 42.0 18.0 Bulkhead and items A-E, H supplied by City A B C D E F G H Literature holder (Weatherguard #8361-3) (Adrian Steel equivalent) One-shelf cabinet (Weatherguard #8312-3) (Adrian Steel equivalent) Four-drawer unit (Weatherguard #8901-3) (One Adrian Steel equivalent, one Weatherguard) Two-drawer unit (Weatherguard #8902-3) (Adrian Steel equivalent) Wheel well base cabinet (Weatherguard #8141-3-01) (One Adrian Steel equivalent, one Weatherguard) Desktop, 42"W X 28"D, fabricated from 5/8" plywood and clad with stainless steel sheet. Edges of sheet will be bent down to form a smooth edge. Desktop will be hinged so that it can be folded and latched securely against the wall. Marine type battery box for Group 27 deep-cycle battery Rack unit (Weatherguard #8415-3-01) City of Palo Alto Project Nr: VR-09000-834, VR-09000-836 Dwg Nr: 4-DS Dwg Date: 4/20/2010 Vehicle Nr: 8215, 8716 Keith LaHaie (650) 496-6948 Approved by: Date:
Bulkhead 20.0in. 13.2in. 13.2in. 51.2 Custom rack, approximately 69"H X 65"L X 18"D, shaped at rear to follow contour of wall and maximize storage space. Rack will be fabricated from heavy gauge 2" steel angle and 14-gauge steel sheet. Lower section (A) wheel.well compartment with custom-fabricated door that will match the wheel well compartment door installed on the driver side. The ends of this section will be enclosed. Center section (B) shovel/long-handled tool bin, with 4" deep shelf (approximately 26"H). Shelf will be lined with Dri- Dek or approved equal. Rear of section will be enclosed with a piece of exterior grade plywood. The side facing into the bin will be coated with white Line-X. Each end of the bin will be open above the lip of the shelf so that tools can overhang if necessary. The ends of this section will be open. Upper sections (C, D) five (5) equal size compartments, approximately 12W X 15"H X 12"D. Clear opening will be 12" X 12". Rear of sections will be enclosed. Top of section will comprise a shelf. The shelf will include a 2" lip on all sides. All items except bulkhead supplied by Contractor. City will supply bulkhead. City of Palo Alto Project Nr: VR-09000-831 Dwg Nr: Vehicle Nr: 7214 Approved by: 5-PS Dwg Date: 6/21/2010 Keith LaHaie (650) 496-6948 Date:
PHOTO 1 (Item #5) Vertical Sliding Rack PHOTO 2 (Item #5) Vertical Sliding Rack
PHOTO 3 (Item #5) Bed Rat Platform PHOTO 4 (Item #5) Long-Handled Tool Brackets
PHOTO 5 (Item #5) Storage Rack Passenger Side PHOTO 6 (Item #5) Storage Rack Passenger Side
PHOTO 7 (Item #5) Floor-Mounted Crane PHOTO 8 (Item #5) Bottle Storage Rack
PHOTO 9 (Item #5) Bottle Storage Rack PHOTO 10 (Item #5) Rear Step Bumper
PHOTO 11 (Item #5) Eye Bolt PHOTO 12 (Item #5) Grab Handle Locations
PHOTO 13 (Item #5) Conduit Carrier PHOTO 14 (Item #5) Door Hold-Open
PHOTO 15 (Item #5) Cart Retaining Hooks PHOTO 16 (Item #6) Ramp System
PHOTO 17 (Item #6) Ramp System PHOTO 18 (Item #6) Rodder Unit Stowed