Thermal and magnetic protection PS Motor protection devices Standards/pprovals 097, 0972, 097 N V 00T 0//2 UL/S UL/cULus Shipping approvals: RN ureau Lloyd s Register Veritas ermanischer Lloyd haracteristics Rocker and rotary handle operator Thermal and magnetic protection Standard and high capacity cu = 0k cs = 0% cu cu < 0k cs min. 7% cu lear identification of the operation state (ONOtripped) mbient temperature compensation Phase failure protection culus uxiliaries Technical performances ccessories uxiliaries usbar system Technical data imensions useless starters oordination tables pg.. pg.. pg.. pg..2 pg.. pg.. Rated current n Rated operational current e () Rated power at ac Utilisation category 0972 (circuit breaker) 097 (MMS) Tripping class 097 Magnetic release e max. Mechanical/electrical endurance () (kw) () 0. 0. 0.02 x 0,000.2
LSS PS Standard capacity Rated power phase motors at ac Pn (kw) Rated current n () () Thermal current setting range () nstantaneous release () Rated ultimate cu (k) Rated service cs (k) at. no. Ref. no. Pack. LSS 0.02 0.0 0.09 0.2/0. 0. 0.7/0. 0.7. 2.2 /. 7. 0. 0. 0. 0.. 2.. 0. 0. 0. 0. 0. 0.0 0.0 0. 0..00.0.. 2. 2..0.0.. 9 9 2 2...2.2.. 2.9 0 9 20 () Rated current: highest thermal current setting range value. PS igh capacity. Rated power phase motors at ac Pn (kw) 0.02 0.0 0.09 0.2/0. 0. 0.7/0. 0.7. 2.2 /. 7. Rated current n () () 0. 0. 0. 0.. 2.. Thermal current setting range () 0. 0. 0. 0. 0. 0.0 0.0 0. 0..00.. 2. 2..0.0.. 9 9 2 nstantaneous release () Rated current: highest thermal current setting range value. () 2...2.2.. 2.9 0 9 20 0 0 0 0 0 0 0 0 0 0 Rated ultimate cu (k) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 9 9 9 9 Rated service cs (k) 0 0 0 0 0 0 0 0 0 0 0 PSS PSS PSS PSS PSS PSS PSS PSS PSSJ PSSK PSSL PSSM PSSN PSSP PSSR at. no. PS PS PS PS PS PS PS PS PSJ PSK PSL PSM PSN PSP PSR 2 22 2 2 2 27 2 29 2 22 222 22 22 2 Ref. no. 2 2 2 27 2 29 2 22 2 2 2 27 2 Pack. Order codes.
Thermal and magnetic protection PS2 Motor protection devices Standards/pprovals 097, 0972, 097 N V 00T 0//2 UL/S UL/cULus Shipping approvals: RN ureau Lloyd s Register Veritas ermanischer Lloyd haracteristics Rotary handle operator Thermal and magnetic protection Standard and high capacity cu = 0k cs = 0% cu cu < 0k cs min. 7% cu lear identification of the operation state (ONOtripped) mbient temperature compensation Phase failure protection culus uxiliaries Technical performances Rated current n Rated operational current e Rated power at ac Utilisation category 0972 (circuit breaker) 097 (MMS) Tripping class 097 Magnetic release e max. Mechanical/electrical endurance () () (kw) () 0 x,000/,000 ccessories uxiliaries usbar system Technical data imensions useless starters oordination tables pg.. pg.. pg.. pg..2 pg.. pg...
LSS PS2 Standard capacity Rated power phase motors at ac Pn (kw) Rated current n () () Thermal current setting range () nstantaneous release () Rated ultimate cu (k) Rated service cs (k) at. no. Ref. no. Pack. /. 7.. 22 0 0. 9 9 2 2 0 0 9 20 9 0 0 9 9 9 9 9 9 9 PS2SK PS2SL PS2SM PS2SN PS2SP PS2SR PS2SS PS2ST PS2SU 22 79 227 22 229 20 2 2 2 LSS () Rated current: highest thermal current setting range value. PS2 igh capacity Rated power phase motors at ac Pn Rated current n () Thermal current setting range nstantaneous release Shortcircuit Shortcircuit at. no. Ref. no. Pack. Order codes (kw) /. 7.. 22 0 () 0 (). 9 9 2 2 0 () 0 9 20 9 cu (k) 0 0 cs (k) 0 0 PS2K PS2L PS2M PS2N PS2P PS2R PS2S PS2T PS2U 29 7 0 2 () Rated current: highest thermal current setting range value..
Technical data eneral data rame size PS PS2 Motor protection devices Rated insolation voltage Ui Rated operating voltage Ue Rated impulse withstand strength Uimp Rated frequency Total power loss P (W) Utilisation category: 972 (ircuit breaker) 97 (Motor starter) Mechanical operational performance lectrical operational performance Max.operations per hour (motor startup) mbient conditions: Storage temperature Operation temperature Temperature compensation mbient temperature compensation Operational altitude Shock resistance ( ) Vibration resistance Shock hazard prot. (acc.n V 0) Protection degree (acc.to 29) ac kv /0z 0. to 7W.W at. 0,000 (70,000 for ) 0,000 (70,000 for ) 0 to +0 to +0 to +0 up to 00m 0g (width ms) g ( to z) fingerproof P 00V ac kv /0z up to W 0 to W 7W at.,000,000 0 to +0 to +0 to +0 up to 00m 0g (width ms) g ( to z) fingerproof P (P with acc PPTP2) Rated current e Overload protection Phase failure protection Tripping class Magnetic release (factory set) Test trip button Standards & pprovals 97 / 2 / N V 00T 0 / / 2 UL UL type culus / S / N / i Shipping approvals up to 97 x emax Only PS* n process up to 97 x emax Mounting data Terminal capacity: Solid or stranded without end sleeve Stranded with end sleeve W Operating mechanism lockable in O position diameter (mm) Terminal type Tightening torque Screwdriver Mounting: Nrail Screws Operating position: turning to the front turning to the back turning to both sides x... mm 2 2 x... mm 2 or 2 x... mm 2 x / 2 x. to. screw 2 Nm / Lb.in Pz2 / slotted combination no 0 90 0 or 2 x... mm 2 x mm 2 / 2 x mm 2 x 2 / 2 x. to. box Nm / Lb.in Pz2 / slotted combination 0 90 0 andle operation imensions width (mm) height (mm) depth (mm) Rocker level / Rotary 90 (PS*S) 7 / 92. (PS*) Rotary 7..
.9 Technical data Ultimate capacity (cu) in k or ranges PSS* / PSMS* Rated current () 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V. 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 2. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 J. 0 0 0 0 0 0 K 0 0 0 0 0 0 0 0 L 0 0 0 2 0 0 0 2 M 0 0 0 0 2 N 0 0 2 P 0 0 2 R 0 0 S 0 0 T 0 U 0 or ranges PS2S* / PS2MS* or ranges PS2* / PS2M* or ranges PS* / PSM* Shortcircuit proof with an cu = 0k or k Rated service capacity (cs) in k Rated current () 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V 2/20V 00/V 0V 0/V 0. 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0. 0 0 0 0 0 0 0 0 0 0 0 0 2. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 J. 0 0 0 0 0 0 K 0 0 0 0 0 0 2 0 0 L 0 0 0 0 0 0 M 0 9 0 0 9 0 9 N 9 0 9 0 9 P 9 0 9 0 9 R 9 0 9 0 S 0 9 0 T 9 0 U 9 0 ackup fuses are necessary in case of possibility of a current higher than 0k or k at the installation point of the device (on request) cs = 0%cu when cu = 0k cs = 7%cu when cu < 0k. 0 0 0 0 0 0 0 0 0 0 0 0 or ranges PSS* / PSMS* or ranges PS2S* / PS2MS* or ranges PS2* / PS2M* or ranges PS* / PSM*
. Motor protection devices ackup gl/g fuses only if cs > cu (k) gl/g fuses () 20V 0V 0V 20V 0V 0V 20V 0V 0V 20V 0V 0V 0. 0. 0.. 2. 0 0 J. 0 0 K 0 0 L 0 0 M 0 0 0 0 0 0 0 0 0 0 0 N 0 0 0 0 0 0 0 0 0 P 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 S 0 0 0 0 0 T 0 0 0 0 0 0 U 0 0 0 0 0 0 0. PS* or ranges PSS* / PSMS* or ranges PS2S* / PS2MS* or ranges PS2* / PS2M* or ranges PS* / PSM* ackup gl/g fuses only if cs > cu (k) Manual motor starter: PS... Manual motor starter: PS2...
Specific letthrough energy at Ue = 00/ V Manual motor starter: PS... Manual motor starter: PS2... Technical data Peak current limitation at Ue = 00/ V Manual motor starter: PS... Manual motor starter: PS2....2
Mounting possibilities of the auxiliaries Motor protection devices Wiring diagram rontal auxiliaries uxiliary contact block larm contact block Type NO or N NO or N escription Two frontal auxiliary contact blocks can be installed at the same time maintaining the overall width of the manual motor starter. nstalled on the frontal right side. an be mounted in combination with the frontal auxiliary block. The overall width of the manual motor starter is maintained. Lateral auxiliaries uxiliary contact block 2NO NO + N 2N ifferent catalogue numbers for left or right mounting. Maximum number of auxiliary contact blocks mounted on each side: 2. Total number of auxiliary contacts in combination frontal and lateral:. Width of each lateral auxiliary contact block: 9 mm. PS rated at allows maximum 2 auxiliary contact blocks ( contacts). uxiliary/alarm contact block NO (alarm) + NO (auxiliary) NO (alarm) + N (auxiliary) N (alarm) + NO (auxiliary) N (alarm) + N (auxiliary) nstalled on the left side. Maximum number of blocks per manual motor starter:. an be fitted together with one lateral auxiliary contact block or one shortcircuit alarm block mounted on the left side. Width of each lateral alarm/auxiliary contact block: 9 mm. Shortcircuit alarm contact block NO + N nstalled on the left side. Tripping in case of only. an be fitted together with one lateral auxiliary contact block or one auxiliary/ alarm block mounted on the left side. Width of each alarm contact block: 9 mm. Shunt trip nstalled on the right side. an not be mounted together with the undervoltage release or any lateral block mounted on the same side. Width of each shunt trip: mm. Undervoltage trip nstalled on the right side. an not be mounted together with a shunt trip device or any lateral block mounted on the same side. Width of each undervoltage trip: mm Undervoltage trip with 2NO early make auxiliary contacts nstalled on the right side. Two different types, one for the PS*S.. and another for the PS*..and PS2.. an not be mounted together with a shunt trip device or any lateral block mounted on the same side. Width of each undervoltage trip: mm. Shunt trip, undervoltage trip and undervoltage with 2NO contacts can be mounted together with any frontal block or left lateral block with above mentioned restrictions.22
uxiliaries atalogue reference P*.. ux. frontal block P*L.. PL.. P.. P.. ux. lateral block larm frontal block larm/aux. lateral block Shortcircuit alarm block ont. cap. contacts class (UL) 00 / Q00 00 / P00 00 / Q00 00 / P00 00 / P00 ackup fuses g, gl Rated operating voltage Ue (Vac) Rated operational current () 20. 20 00 2.2 0. 90 0. Utilization category 20 20. 00 2.2 0. 90 0. 20 00 2.2 0. 90 0. Rated operating voltage Ue (Vdc) Rated operational current () 2. 0. 0.27. 2 0. Utilization category 2 0. 0.27.. 2 0.. 2 0. Mounting side Terminals capacity: Solid or stranded without end sleeve W Terminal type Tightening torque Screwdriver imensions width (mm) ront 2x0. 2. mm 2 2x screw 0.Nm Pz2/Slotted Maintain same width Left or right 2x0. 2. mm 2 2x screw 0.Nm Pz2/Slotted ncrease width 9 mm Mounting data rontal right 2x0. 2. mm 2 2x screw 0.Nm Pz2/Slotted Maintain same width Left 2x0. 2. mm 2 2x screw 0.Nm Pz2/Slotted ncrease width 9 mm Left 2x0. 2. mm 2 2x screw 0.Nm Pz2/Slotted ncrease width 9 mm Technical data atalogue reference Power consuption: Pickup (V/W) old (V/W) Operating voltage Tripping (V) Pickup (V) Max. operation supply (ms) PU Undervoltage trip 2/2 /.2 0.Ve0.7Ve 0.Ve.Ve PS Shunt trip 2/2 0.7Ve.Ve () Rated operating voltage Ue ontacts class (UL) ackup fuses (g,g) 2V z 2V 0z V z V 0z /27V z / V 0z V 0z 2/20V z / /20V 0z V z / 277V 0z 0/ z /0V z / 0/0V 0z 0V z / 0z 2V /0z V 0z V z / 0V 0z /27V z / V 0z V 0z 2/20V z / /20V 0z V z / 277V 0z 0/ z /0V z / 0/0V 0z 0V z / 0z 2 to 0Vdc to Vdc Mounting side Terminals capacity: Solid or stranded without end sleeve W Terminal type Tightening torque Screwdriver Right 2x0. 2. mm 2 2x Screw 0.Nm Pz2/Slotted Mounting data Right 2x0. 2. mm 2 2x Screw 0.Nm Pz2/Slotted imensions width (mm) ncrease width mm etailed dimensions see page. ncrease width mm.2
imensional drawings Manual Motor Starter PS rocker Motor protection devices Manual Motor Starter PS rotary Manual Motor Starter PS2.2
uxiliary contact blocks rontal uxiliary contact blocks Lateral imensions larm contact blocks rontal larm contact blocks Lateral Shunt and undervoltage trip devices Shortcircuit contact block.
imensional drawings PS rocker + Undervoltage trip device with 2NO contacts Motor protection devices PS rocker + uxiliaries PS rotary + uxiliaries PS2 + uxiliaries.2
xternal handle operator Load side imensions Type pplicable frame.27