Characteristics, references TeSys enclosed starters D..L. starters for motor control 0. to. kw with -phase thermal overload relay with protected phases Characteristics () Conforming to standards IEC 0--, IEC 0-, VDE 00-0 and EN 0 Degree of protection conforming to IEC 0 IP Ambient air temperature peration: - to + 0 C perating positions Same as for the TeSys K contactors Material Self-extinguishing ABS References Non-reversing starters Starter LE M, combined with short-circuit protection components, provides type or type coordination, depending on the type of devices used. Standard power ratings of -phase motors 0-0 Hz in category AC- 0 V 0 V 0 V 0 V 00 V V Setting range of thermal overload relay LR K () Basic reference, to be completed by adding the voltage code () kw kw kw kw A 0. 0. 0. 0. 0. 0. LE Mpp0 0.00 0. 0. 0. 0. 0.. LE Mpp0 0.00 0. 0. 0. 0... LE Mpp0 0.00 0. 0.. 0... LE Mpp0 0.00 0. 0..... LE Mpp0 0.00. 0..... LE Mpp 0.00... LE Mpp 0.00... LE Mpp 0.00 LE Mpppp.. 0 LE Mpp 0.00... LE Mpp 0.00 Variant Replacement part b The standard version comprises: v TeSys contactor LC Kpp, v TeSys thermal overload relay LR K, v green Start button I, v red Stop/Reset button /R, v yellow operating indicator. b Control may be pulsed or maintained. b An earth terminal and a neutral terminal are provided on the bottom of the enclosure. b For safey applications, see enclosed starters: GV MC, LG K, LG D, LG K, LG D, LJ K, LG K and LJ K. Starter without thermal overload relay LR K Delete the last digits of the starter references selected above. Example: LE Mpp Basic reference, to be completed by adding the voltage code () Contactor LC KppA0 0.0 0 () For characteristics of TeSys K contactor, see pages /0 and /. For characteristics of TeSys thermal overload relay LR K, see pages /0 to /. () Thermal overload relay fitted as standard. () The contactor coil is pre-wired between phases of the power circuit. The codes indicated below therefore correspond to the power circuit voltage. Volts 0 0 0 0 00 0 a 0/0 Hz Code B M P U Q V N R Example: 0/00 V -phase supply, kw motor: LE MQ. page / page / /
Dimensions, schemes TeSys enclosed starters D..L. starters for motor control 0. to. kw with -phase thermal overload relay with protected phases Dimensions LE M () 0 0 0 ("/) Knock-outs or blanking plugs for cable glands Enclosure type At top At bottom PG IS PG IS LE M x to x x 0 or x x to x x 0 or x () Can be mounted on machine panel or frame. Knock-outs for x P cable glands. Schemes LE M I /R L L L T T T A A Reset/R /L U /L V M /L I W Choice of type of control built into the product Control by latching pushbuttons Control by spring return pushbuttons A B A H A KM Connection A B 0 V, 0 V, 0 V L Neutral 0 V, 00 V, V, 0 V L L ther voltages Terminal Terminal A B I /R A H A 0 References : page / /
Characteristics, references TeSys enclosed starters D..L. starters for motor control, 0. to. kw with thermal magnetic circuit-breaker and contactor 0 Characteristics Conforming to standards IEC 0--, IEC 0-, VDE 00-0 and EN 0 Degree of protection conforming to IEC 0 IP Ambient air temperature peration: - to + 0 C perating positions Same as for the TeSys K contactors Material Polycarbonate () References Standard power ratings of -phase motors 0-0 Hz in category AC- 0 V 00/ 0 V 00 V 0 V V Setting range of thermal trips Fixed magnetic tripping current Irth Basic reference, to be completed by adding the voltage code () kw kw kw kw kw A A 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.... LE GVME0Kpp.0 0. 0. 0....... LE GVME0Kpp.0 0. 0........ LE GVME0Kpp.0 LE GVMEppKpp Variants........... LE GVME0Kpp.0... 0 LE GVMEKpp.0 0 LE GVMEKpp.0 Suffix to be added to the starter reference () Neutral terminal A 0 LE GVMEK Accessories (to be ordered separately) Reference Enclosure without starter, with sealing kit fitted (references of combination motor starters for customer assembly, see pages / and /) LE GVMEK 0.0 Padlocking device () to padlocks for GV ME operator (padlocking Ø to mm is only possible in the position) Mushroom head Stop pushbutton Ø 0 mm, red Sealing kit Sold in lots of Unit reference GV V0 0.0 Spring return () GV K0 0.0 Latching () IP Key release, GV K0 0.0 key n Turn to release GV K0 0. GV K0 () 0.0 IP for 0 GV E0 0.0 temperature between + C and + 0 C IP for 0 GV E0 0.0 temperature between - 0 C and + 0 C () Avoid placing this material in contact with harsh substances (detergents, chlorine solvents, ketones, alcohol, aromatic hydrocarbons). () Standard control circuit voltages. Volts 0 0 0 0 0 00 0 a 0/0 Hz Item B D E F M P U Q V N R ther voltages: please consult your Regional Sales ffice. () Example: LE GVME0KFA. () Supplied with IP sealing kit. () Padlockable in position using Ø to mm shank padlocks. page / page / /0
Dimensions, schemes TeSys enclosed starters D..L. starters for motor control, 0. to. kw with thermal magnetic circuit-breaker and contactor Dimensions LE GVMEK 0 Knock-outs or blanking plugs for cable glands Enclosure type At top At bottom IS IS LE GV x 0 or x x 0 or x Schemes LE GVMEK 0 A L L L Q Q External control I A B A Connections A B 0 V, 0 V, 0 V L Neutral 0 V, 00 V, V, 0 V L L ther voltages Terminal Terminal 0 References : page /0 /
References TeSys enclosed starters Equipment for control in utilisation category AC-() (), without isolating device 0 References perational current up to Minimum c.s.a. of phase conductors Fuses to be fitted separately am gg For use with relay LR D or kit LA D (to be ordered separately) Basic reference, to be completed by adding the voltage code () A mm A A. LA D () LE Dpp 0.0.. 0 LR D () LE Dpp 0.0. LR D () LE Dpp.0 LE D LA D0 () LE Dpp.0 0 0 0 LE D0ppA0 ().0 0 LR D () LE D0pp.0 LE DppA0 () 0 LR D () LE Dpp.0.0 0 00 LR D () LE D0pp.0 LE D0 00 00 LE D0ppA0 ().0 Specifications Enclosure LE D Double insulated, degree of protection IP LE D Double insulated, degree of protection IP LE D0...D0 Metal, degree of protection IP Control ( pushbuttons mounted on enclosure cover) LE D D0 No pushbuttons on cover LE DpppppA0 green Start button I red Stop/Reset button Connections LE D D0 Pre-wired control circuit connections () -phase 0/0 V, 0 V, 0/00 V or V 0/0 Hz. -core or Ph + N (unprotected neutral) insulated PVC cable, fixed to walls, ceilings, in cable racks or ducting, laid singly, ambient temperature y C, conforming to NF C -00. () Control circuit voltage 0/0 Hz 0/0 V (code M) or 0/00 V (code Q). () rder the required LR D thermal overload relay separately, for use on balanced circuits only. () As protection is provided by type gg fuses only, the Stop function normally provided by the thermal overload relay (where am type fuses are used) can be obtained by means of kit LA Dpp. () Equipment supplied without pushbuttons; external Start-Stop station required. 0 page / page / /
References (continued) TeSys enclosed starters Equipment for control in utilisation category AC-() (), without isolating device Variants (pre-assembled) Application Suffix to be added to the starter reference () No pushbuttons on cover LE D and D A0 blue Reset button R LE D D0 A0 green Start button I and red Stop button with N/C contact (for distribution circuits without thermal overload relay) LE D and D A0 -position selector switch -I ( : Stop; I : Manual Start) blue Reset button R Knock-outs for x mm plastic cable glands (instead of x mm plastic glands) LE D LE D A A0 neutral terminal (for -phase + N circuits) LE D D0 A Accessories (for customer assembly) Start pushbutton latching device for stay put operation (Start-Stop) Kits to provide Stop function without thermal overload relay fitted For use on Reference LE D D LA D00 0.00 LE D LA D 0.00 LE D LA D0 0.00 Miniature control circuit fuse holder size x 0, A/0 V Fuse supplied LE D LA D 0.00 LE D LA D 0.0 Pilot light with neon bulb, red lens and locking ring 0 V LE D and D LA D 0.00 0 V LE D and D LA D 0.00 0, V LE D and D LA D 0.00 front-mounting block of auxiliary contacts, please consult your Regional Sales ffice LE D D0 LA DNpp 0.00. () -phase 0/0 V or 0/00 V 0/0 Hz. -core or Ph + N (unprotected neutral) insulated PVC cable, fixed to walls, ceilings, in cable racks or ducting, laid singly, ambient temperature y C, conforming to NF C -00. () rder the required LR D thermal overload relay separately, for use on balanced circuits only. Example: LE DMA0. ther versions Possible combinations of variants. Please consult your Regional Sales ffice. 0 page / page / /
Dimensions Enclosed starters D..L. starters and equipment, without isolating device Dimensions LE D LE D 0 0 0 0 LE D0, D LE D0 0 0 () 0 c () 0 for LE DpppppA0 (without pushbuttons). Knock-outs or blanking plugs for cable glands Type of enclosure At top At bottom LE D x P x P LE D x P and x P x P LE D0 and LE D x P and x P x P and x P LE D0 x P and x P x P and x P 0 References : pages / and / page / /
Schemes Enclosed starters D..L. starters and equipment, without isolating device Schemes D..L. starters and equipment for control in category AC- LE D D0, LE DpppppA0 LE D /L U /L V LE D D0 W /L KM/ N I KM/ A A LE DpppppA0, LE DpppppA0 KM/ KM/ l N KM/ A A Remote control N KM/ l A A 0 References : pages / and / page / /