for Fader Control of s Master Type K Fader RS K Series Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications Items tolerance Specifications 0% Maximum operating voltage 50V AC, 0V DC Operating force Operating life 00,000cycles Operating temperature range 0 Product Line Number of resistor elements Lever Length of lever Type Total resistance k Resistance taper Minimum packing unit pcs. Products No. Drawing No. 00 9-T T-Bar. Standard 0 5A 00 RSKA9000 RSA0KA900L RSA0KA00 Products other than those listed in above products are also available. Please contact us for details. Refer to P.6 for product varieties. Refer to P.6 for details of lever s.
for Fader Control of s Master Type K Fader RS K Series Dimensions Unit:mm No. Style. 0 9.6 -M.5.5 t=..5...5.5. -ø. holes 0 5 5.5 Terminal No. 00.5.9 0.6 -M t=..5.5.5...5 -ø. holes 0 5.5 Terminal No. 00.9 0.6 -M t=.. 6-ø. holes 5x5=5 ' ' '.5 Terminal No. 5
Master Type Potentiometer K Fader Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Specifications Standard CP Type Single- unit Single- unit /00 Oeprating Terminal style Sliding life Micro switch force Connector Lead JST SB-EH JST S9B-EH 0. to 0.6N 0.05 to N 0. to N 00,000 cycles 00,000 cycles Available Lever Types Configuration code Dimensions.5 0 () 0 9-T T-Bar t=. t=. t=..5.5 Unit:mm.5. 5. Total Resistance Variety k 0F 50 00 50 CP Only 0 k Resistance Taper Resistance taper 5A B Circuit Diagram. marked are specifications recommended by ALPS.. Products other than those listed in the above list are also available. Please contact us for details. Refer to P.7 for resistance taper. 6
Master Type Potentiometer K Fader Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample Part Number R S 6 0 K A 9 T A 0 A0 mm 00mm Number of resistor elements Resistor element, and presence of micro switch. Resistor elements Standard Resistor elements CP A Without micro switch K Without micro switch B With micro switch L With micro switch Type of operation unit Configuration code 0 0 9T 9-T T-Bar Resistance taper Resistance taper J 00 90 A B 5A B G 00 (%) Output volt.across term.- Input volt. across term. - 0 70 50 0 0 0 0 B(B) A(5A) kω 0 0 kω 0 00 50 50 5 50 CP : Supports 0 k only. 0 0 0 0 0 50 70 0 90 00 Term."" Rotation travel (%) J Term."" Note marked are specifications recommended by ALPS. 7
Control of s List of Varieties Item Photo Master Low-profile master Motor-driven master RS K RS N RS NS RS Y RSA0K V RS N M Outlined specifications Electrical Performance Mechanical Performance Soldering Number of resistor elements k Resistance taper Operating force Stopper strength Lever pushpull strength Lever deviation Both Side Lever deviation Manual soldering Dip soldering RSK 00 RSA0K 00 RSA0K 0, 50, 00, 50 5A, B Standard 0. to 0.6N 00N RSN 00 RSA0N RSN 00 RSA0N RSNS RSSY RSNM 00 RSA0KV 00 RSA0NS RSDY 00 RSA0NM CP RS N 0, 50, 00, 50 RS NS 0, 50, 00, 50 RS Y 0, 0, 50 RS N 5A, B, 0A RS N S 5A, B, 0A RS Y 5A, B, 0A RS N 0.05 to 0.N 0.05 to 0.9N RS Y 0. to.0n RS NS 0.05 to 0.N 00N L 5 mm max. One side 50 max. s max. 50N RS N M 0, 50, 00, 50 RSA0K V 0 B Servo B Audio 5A, B, 0A RS N M 0. to.n RSA0K V, to 0.65N max. 5s max. RS N Lead, RSA0K V not available Environmental Performance Cold Dry heat Damp heat 0 for 96h 70 for 0h 0, 90 to 95 RH for 96h Page 5. Attenuation is specified for residual resistance.. "L" in the "Lever Wobble" column of the above table indicates the length of lever.. Products other than those listed in the above list are also available. Please contact us for details.