Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors
|
|
- Aubrie Owen
- 6 years ago
- Views:
Transcription
1 ...BC e3 Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS TYPE CASE SIZE IMPERIAL CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC RMS /DC V FEATURES High volume product suitable for commercial applications Excellent stability ( R/R 1 % for 1000 h at 70 C) Lead (Pb)-free solder contacts on Ni barrier layer Metal glaze on high quality ceramic Protective overglaze Material categorization: for definitions of compliance please see TEMPERATURE COEFFICIENT ppm/k TOLERANCE % RESISTANCE RANGE SERIES ± to 1M ± 2, ± 5 E BC RR0402M 1.0 to / +600 ± 2, ± to 9.1 E24 Zero-Ohm-Resistor: R max. = 50 m, I max. = 0.5 A ± R to 10M ± 0.5 E96-200/ R0 to 9R R to 1M ± R to 10M BC 0201 RR 0603M / R0 to 9R76 ± R to 10M ± 5 E / R0 to 9R1 Zero-Ohm-Resistor: R max. = 50 m, I max. at 70 C = 1.0 A BC 0402 RR 1005M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 1.5 A BC 0603 RR 1608M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 2.0 A BC 0805 RR 2012M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 2.5 A BC 1206 RR 3216M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 3.5 A BC 1210 RR 3225M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 4.0 A BC 2010 RR 5025M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 5.0 A BC 2512 RR 6332M Zero-Ohm-Resistor: R max. = 20 m, I max. at 70 C = 7.0 A Notes These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. Revision: 19-Oct-17 1 Document Number: 28743
2 ...BC e3 TECHNICAL SPECIFICATIONS PARAMETER UNIT BC BC BC BC BC BC BC BC BC Rated Dissipation W P (1) 70 Limiting Element Voltage U max. AC RMS /DC Insulation Voltage U ins (1 min) Insulation Resistance Operating Temperature Range V V > 10 9 C -55 to to +155 Failure Rate C 0.3 x 10-9 Mass mg Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: RFKTCBC C R C W R F K T C B C TYPE RESISTANCE TOLERANCE TCR PACKAGING Special R = decimal K = thousand M = million 0000 = jumper D = ± 0.5 % F =.0 % G = ± 2.0 % J = ± 5.0 % Z = Jumper PRODUCT DESCRIPTION: 0603-BC R 1 % RT6 e3 K = 00 ppm/k N = ± 200 ppm/k R = ± 250 ppm/k X = -200 ppm/k / +400 ppm/k Y = -200 ppm/k / +600 ppm/k 0 = Jumper TA, TB, TC, TD, TE, TF, TH, TI, TL Up to 2 digits BC = commodity 0603-BC R 1 % RT6 e3 TYPE TCR RESISTANCE BC 0201-BC 0402-BC 0603-BC 0805-BC 1206-BC 1210-BC 2010-BC 2512-BC 00 ppm/k ± 200 ppm/k ± 250 ppm/k -200 ppm/k / +400 ppm/k -200 ppm/k / +600 ppm/k 10R = R = K = 10.0 k 1M = 1 M 0R0 = Jumper TOLERANCE VALUE ± 0.5 % % ± 2 % ± 5 % PACKAGING RT1, RT2, RT3, RT5, RT6, RT7, RF4, R02, R82 LEAD (Pb)-FREE e3 = pure tin termination finish Revision: 19-Oct-17 2 Document Number: 28743
3 ...BC e3 PACKAGING TYPE CODE QUANTITY CARRIER TAPE WIDTH PITCH REEL DIAMETER BC TL = RT mm 2 mm TD = RT BC TI = RT mm 2 mm 254 mm/10" TE = RF mm/13" TD = RT BC TI = RT mm 2 mm 254 mm/10" TE = RF mm/13" 0603 BC Paper tape acc. to , Type 1a 0805 BC 1206 BC 1210 BC 2010 BC TF = R mm 4 mm 2512 BC TH = R mm 4 mm DIMENSIONS in millimeters SIZE DIMENSIONS RECOMMENDED SOLDER PAD DIMENSIONS (1) REFLOW SOLDERING WAVE SOLDERING IMPERIAL METRIC L W H T1 T2 a b l a b l ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Notes (1) The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or boardmaterials maybe required to maintain the reliability of the assembly. The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards x, or in publication IPC They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other parameters. Still the given solder pad dimensions will be found adequate for most general applications. (2) No marking for 01005, 0201, and 0402 sizes. Revision: 19-Oct-17 3 Document Number: 28743
4 ...BC e3 DERATING Rated Power in % BC e BC e Ambient Temperature in C S AND REQUIREMENTS EN CLAUSE REQUIREMENTS PERMISSIBLE CHANGE ( R) CLASS 1 CLASS 2 SIZE BC e3 1 to 10 M 1 to 10 M 1 to 10 M Resistance - % ± 5 % ± 0.5 %, %, ± 5 % Temperature coefficient (20 / -55 / 20) C and (20 / 125 / 20) C 00 ppm/k, ± 200 ppm/k ± 200 ppm/k 00 ppm/k, ± 200 ppm/k, ppm/k/ ppm/k Short time overload U = 2.5 x P 70 x R 2 x U max.; duration: Acc. to the style ± (0.25 % R )± (0.5 % R ) ± (1 % R ) (Td) Solderability Pre-aging 4 h at 155 C, dryheat Solder bath method; Sn60Pb40 non activated flux; (235 ± 5) C (2 ± 0.2) s Solder bath method; Sn96.5Ag3Cu0.5 non activated flux; (245 ± 5) C (3 ± 0.3) s (Td) (Na) Resistance to soldering heat Rapid change of temperature Solder bath method (260 ± 5) C; (10 ) s ± (0.25 % R )± (0.5 % R ) ± (1 % R ) 30 min. at - 55 C; 30 min. at 125 C; 5 cycles ± (0.25 % R )± (0.5% R ) ± (0.5% R ) 1000 cycles ± (1 % R ) ± (1 % R ) ± (1 % R ) (Cab) Damp heat, steady state (40 ± 2) C; 56 days; (93 ± 3) % RH ± (1 % R ) ± (2 % R ) ± (2 % R ) Revision: 19-Oct-17 4 Document Number: 28743
5 S AND REQUIREMENTS EN CLAUSE BC e3 REQUIREMENTS PERMISSIBLE CHANGE ( R) CLASS 1 CLASS 2 SIZE Climatic sequence: -...BC e3 1 to 10 M 1 to 10 M 1 to 10 M (Ba) Dry heat 125 C; 16 h (Db) Damp heat, cyclic 55 C; 90 % RH; 24 h; 1 cycle (Aa) Cold -55 C; 2 h ± (1 % R ) ± (2 % R ) ± (2 % R ) (M) (Db) Low air pressure Damp heat, cyclic 1 kpa; (25 0) C; 1 h 55 C; 90 % RH; 24 h; 5 cycles DC load U = P 70 x R U max Endurance at 70 C Endurance at 125 C U = P 70 x R U max.; 1.5 h on; 0.5 h off; 70 C; 1000 h ± (1 % R ) ± (2 % R ) ± (2 % R ) 70 C; 8000 h ± (2 % R ) ± (4 % R ) ± (4 % R ) 125 C, 1000 h ± (1 % R ) ± (2 % R ) ± (2 % R ) S AND REQUIREMENTS REQUIREMENTS PERMISSIBLE CHANGE ( R) EN CLASS 1 CLAUSE e3 1 to 1 M Resistance - %; ± 2 %; ± 5 % Short time overload (Td) Solderability Temperature coefficient U = 2.5 x P 70 x R 2 x U max. ; duration according to style Solder bath method; Sn60Pb40 non activated flux; (235 ± 5) C (2 ± 0.2) s Solder bath method; Sn96.5Ag3Cu0.5 non-activated flux; (235 ± 3) C (2 ± 0.5) s (20/-55/20) C and (20/125/20) C (Uu 1 ) Substrate bending Depth 3 mm; 1 time ± (2 % R ) ppm/k/+600 ppm/k, ± 250 ppm/k No visible damage, no open circuit in bent position ± (1 % R ) Revision: 19-Oct-17 5 Document Number: 28743
6 ...BC e3 S AND REQUIREMENTS EN CLAUSE (Na) Rapid change of temperature Endurance at 70 C (Td) Resistance to soldering heat (Cab) Damp heat, steady state (XA) Endurance at upper category temperature Component solvent resistance e3 15 min. at -55 C; 15 min. at 125 C; 300 cycles U = P 70 x R U max. ; 1.5 h on; 0.5 h off; 70 C; 1000 h Solder bath method (260 ± 5) C; (10 ) s (40 ± 2) C; (90 to 95) % RH; 1000 h ± (2 % R ) ± (5 % R ) ± (2 % R ) ± (5 % R ) 125 C, 1000 h ± (2 % R ) Isopropyl alcohol; (20 to 25) C; (5 ± 0.5) min REQUIREMENTS PERMISSIBLE CHANGE ( R) CLASS 1 1 to 1 M No visible damage APPLICABLE SPECIFICATIONS EN Generic specification EN Sectional specification EN Detail specification X Environmental test procedures Packaging of SMD components Revision: 19-Oct-17 6 Document Number: 28743
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationLead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors
Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors FEATURES High volume product suitable for commercial applications Stability ( R/R 1 % for 1000 h at 70 C) Lead (Pb)-free solder contacts
More informationPulse Proof, High Power Thick Film Chip Resistors
-HP e3 STANDARD ELTRICAL SPIFICATIONS SIZE RATED LIMITING DISSIPATION ELEMENT MODEL INCH METRIC P 70 VOLTAGE W U max. AC/DC FTURES Excellent pulse load capability Enhanced power rating Double side printed
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationLead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors
Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationLong Side Termination Thick Film Chip Resistors
FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200
More informationGreen Thick Film Chip Resistors
Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions
More informationLead (Pb)-bearing Thick Film, Rectangular Chip Resistors
D../CRCW... FEATURES High volume product suitable for commercial and special applications Excellent stability (ΔR/R % for 0 h at 70 C) Lead (Pb)-bearing solder contacts on Ni barrier layer Metal glaze
More informationGreen Commodity Thick Film Chip Resistors
Green Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Green resistor - does not use exemptions Material categorization: for definitions of compliance
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200
More informationLead (Pb)-free Thick Film, Rectangular, Precision Chip Resistors
FEATURES Low temperature coefficient (25 ppm/k) and tight tolerances (± 0.25 %) Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationPrecision Thin Film Chip Resistor Array
ACAC 0612 (concave terminations) and ACAS 0612 (convex terminations) thin chip resistor arrays combine the proven reliability of precision thin film chip resistor products with the advantages of chip resistor
More informationAnti-Surge, High Power Thick Film Chip Resistors
Anti-Surge, High Power Thick Film Chip Resistors FEATURES Excellent surge pulse capability Superior ESD surge characteristics High power rating AEC-Q200 qualified Material categorization: for definitions
More informationPrecision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 to
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors FEATURES Excellent pulse load capability Enhanced power rating Double side printed resistor element AEC-Q200 qualified Material categorization: for definitions
More informationThick Film, Rectangular Chip Resistors
D...-CRCW Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL D CRCW2 D CRCW3 D2 CRCW D25 CRCW6 SIZE POWER RATING P 7 C W INCH METRIC CECC -2/EIA-575 2 5 3 8 2 6 326 CRCW2 2
More informationPrecision Thin Film Chip Resistor Array Superior Moisture Resistivity
, - Precision and precision automotive grade thin film chip resistor arrays with convex terminations combine the proven reliability of discrete chip resistors with the advantages of chip resistor arrays.
More informationMetal Film, Cylindrical Resistors
NOT FOR NEW DESIGNS Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Very low TC and tight tolerances Excellent stability at different environmental conditions Pure
More informationUltra Precision Thin Film MELF Resistors
Ultra Precision Thin Film MELF Resistors and ultra precision thin film MELF resistors combine the proven reliability of precision MELF products with the most advanced level of precision and stability first
More informationThin Film MELF Resistors
Thin Film MELF Resistors FEATURES MELF resistor with high power rating AEC-Q200 qualified Advanced metal film technology Best in class pulse load capability Intrinsic sulfur resistance Material categorization:
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationThin Film Mini-MELF Resistors
Thin Film Mini-MELF Resistors SMM 0204 thin film MELF resistors are the perfect choice for most fields of rn electronics where reliability and stability are of major concern. The typical applications in
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More informationFusible, Non-Flammable Metal Film Leaded Resistors
Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned
More informationHIGH POWER THICK FILM CHIP FIXED RESISTOR
HIGH POWER THICK FI CHIP FIXED RESISTOR 2W High power up to 2W Current detecting resistors for power supply, motor circuits ROHS Compliant with RoHS directive etc Halogen free requirement Switching Power
More informationProfessional MELF Resistors
FEATURES Approved according to EN 4040-803 Advanced thin film technology Excellent overall stability: exceeds Class 0.25 Force fitted steel caps, tin plated on nickel barrier Pure Sn termination on Ni
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationDouble-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
More informationTYPE. 250 ppm / 200 ppm /
FEATURES High power in small packages Available wide range to automatic insertion machine. APPLICATIONS All general purpose power applications. DESCRIPTION A homogeneous film of metal alloy is deposited
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationUltra Precision Metal Film Leaded Resistors
Ultra Precision Metal Film Leaded Resistors FEATURES Exceptional low TCR: ± 2 ppm/k to ± 10 ppm/k Super tight tolerance: ± 0.01 % to ± 0.25 % Exceptional overall stability: class 0.02 Wide resistance range:
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationFEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationTYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm /
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationApproval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.
WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationCR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
More informationTHICK FILM CHIP NETWORK RESISTOR THICK FILM CHIP NETWORK RESISTOR FEATURES TYPE DESIGNATION R C M L 0 8 W J T L
THICK FILM CHIP NETORK RESISTOR THICK FILM CHIP NETORK RESISTOR FEATURES Miniature and light weight. Suit for reflow solder. Stable electrical capability, high reliability. Low assembly cost, suit for
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationCarbon Film Resistors, Standard
LCA... STANDARD ELECTRICAL SPECIFICATIONS FEATURES Securely bonded carbon film Good moisture resistance (ΔR max ±.5 % R) Good long term stability (ΔR max ±.5 % R, for h) Lead (Pb)-free solder contacts
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
More informationPRECISION AXIAL WIREWOUND RESISTOR PAC
PRECISION AXIAL WIREWOUND RESISTOR FEATURES Excellent stability and reliabitity characteristics; Low temperature coefficient; High pulse load handling capabilities; High power dissipation in small volume;
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationWF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
More informationPlatinum SMD Flat Chip Temperature Sensor
Platinum SMD Flat Chip Temperature Sensor FEATURES Standardized characteristics according to IEC 60751 Advanced thin film technology Short reaction times down to t 0.9 2 s (in air) Outstanding stability
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationRoHS compliant & Halogen Free
Product Specification DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CHIP VARISTORS S0402/0603 5.5 V TO 38 V RoHS compliant & Halogen Free 2 SCOPE This specification describes chip varistors with lead-free
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationAnti-Surge THICK FILM CHIP FIXED RESISTOR
Anti-Surge THICK FILM CHIP FIXED ESISTO FEATUES Miniature and light weight. Suit for reflow and wave flow solder. High power,substantially increase the ability of anti-surge Stable electrical capability,
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS. Mid-voltage NP0/X7R. Product Specification April 16, 2015 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 2.2 µf RoHS compliant & Halogen Free Product Specification April 16, 2015 V.15 Product specification
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.2.6 No.RC-K-HTS-0001-13 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: RC1/4,1/2 RoHS COMPLIANCE ITEM Product specification contained in this specification are
More informationPower Metal Film Leaded Resistors
PR, PR, PR3 Power Metal Film Leaded Resistors FEATURES High power in small packages ( W/7 size to 3 W/67 size) Defined fusing characteristics Technology: Metal film Meets active and passive flammability
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationCemented Wirewound Resistors
Cemented Wirewound Resistors The AC series is the perfect choice for general purpose power applications. The AEC-Q2 qualified AC-AT series is best suited for automotive applications. The robust silicon
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationSULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationCemented Leaded Wirewound Precision Resistors
Cemented eaded Wirewound Precision Resistors FEATURES High power dissipation in small volume Ideal for pulse application TCR ± 100 ppm/k Maximum permissible hot spot temperature is 275 C ead (Pb)-free
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS C-Array: Class 2, X7R 16/25/50 V size 0612 (4 0603) Product Specification Jul 21, 2003 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS C-Array: Class 2, X7R 16/25/50 V Product Specification Jul 21, 2003 V.6 FEATURES 0612 (4 0603) capacitors (of the same capacitance value) per array
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
More information