VS-4MT2UHAPbF Half Bridge IGBT MTP (Ultrafast NPT IGBT), 8 A MTP PRIMARY CHARACTERISTICS V CES 2 V V CE(on) typical at V GE = 5 V 3.36 V I C at T C = 25 C 8 A Speed 8 khz to 3 khz Package MTP Circuit configuration Half bridge FEATURES Ultrafast non punch through (NPT) technology Positive V CE(on) temperature coefficient Available μs short circuit capability Available Square RBSOA HEXFRED antiparallel diodes with ultrasoft reverse recovery and low V F Al 2 O 3 DBC Very low stray inductance design for high speed operation UL approved file E78996 Designed and qualified for industrial level Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details BENEFITS Optimized for welding, UPS and SMPS applications Rugged with ultrafast performance Benchmark efficiency above 2 khz Outstanding ZVS and hard switching operation Low EMI, requires less snubbing Excellent current sharing in parallel operation Direct mounting to heatsink PCB solderable terminals Very low junction to case thermal resistance ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS Collector to emitter breakdown voltage V CES 2 V T C = 25 C 8 Continuous collector current I C T C = 4 C 4 Pulsed collector current I CM 6 Clamped inductive load current I LM 6 A Diode continuous forward current I F T C = 5 C 2 Diode maximum forward current I FM 6 Gate to emitter voltage V GE ± 2 RMS isolation voltage V ISOL Any terminal to case, t = min 25 V T C = 25 C 463 Maximum power dissipation (only IGBT) P D T C = C 85 W Revision: 9-Oct-7 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-4MT2UHAPbF ELECTRICAL SPECIFICATIONS (T J = 25 C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS Collector to emitter breakdown voltage V (BR)CES V GE = V, I C = 25 μa 2 - - V Temperature coefficient of breakdown voltage V (BR)CES / T J V GE = V, I C = 3 ma (25 C to 25 C) - +. - V/ C V GE = 5 V, I C = 4 A - 3.36 3.59 Collector to emitter saturation voltage V CE(on) V GE = 5 V, I C = 8 A - 4.53 4.9 V GE = 5 V, I C = 4 A, T J = 5 C - 3.88 4. V V GE = 5 V, I C = 8 A, T J = 5 C - 5.35 5.68 Gate threshold voltage V GE(th) V CE = V GE, I C = 5 μa 4-6 Temperature coefficient of threshold voltage V GE(th) / T J V CE = V GE, I C = ma (25 C to 25 C) - -2 - mv/ C Transconductance g fe V CE = 5 V, I C = 4 A, PW = 8 μs - 35 - S Zero gate voltage collector current I CES V GE = V, V CE = 2 V, T J = 25 C -.4. V GE = V, V CE = 2 V, T J = 5 C -.2 ma V GE = V, V CE = 2 V, T J = 25 C - - 25 μa Gate to emitter leakage current I GES V GE = ± 2 V - - ± 25 na SWITCHING CHARACTERISTICS (T J = 25 C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS Total gate charge (turn-on) Q g IC = 4 A - 399 599 Gate to emitter charge (turn-on) Q ge V CC = 6 V - 43 65 nc Gate to collector charge (turn-on) Q gc V GE = 5 V - 87 28 Turn-on switching loss E on V CC = 6 V, I C = 4 A, V GE = 5 V, -.4.7 Turn-off switching loss E off R = 5, L = 2 μh, T = 25 C, g J energy losses include tail and diode -.35 2.2 Total switching loss E tot reverse recovery - 2.49 3.73 Turn-on switching loss E on V CC = 6 V, I C = 4 A, V GE = 5 V, -.6 2.4 mj Turn-off switching loss E off R g = 5, L = 2 μh, T J = 25 C, energy losses include tail and diode -.62 2.43 Total switching loss E tot reverse recovery - 3.22 4.82 Input capacitance C ies VGE = V - 552 8282 Output capacitance C oes V CC = 3 V - 38 57 pf Reverse transfer capacitance C res f =. MHz - 7 257 Reverse bias safe operating area Short circuit safe operating area RBSOA SCSOA T J = 5 C, I C = 6 A V CC = V, V p = 2 V R g = 5, V GE = + 5 V to V T J = 5 C, V CC = 9 V, V p = 2 V R g = 5, V GE = + 5 V to V Fullsquare - - μs DIODE SPECIFICATIONS (T J = 25 C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS I C = 4 A - 2.98 3.38 I C = 8 A - 3.9 4.4 Diode forward voltage drop V FM I C = 4 A, T J = 25 C - 3.8 3.39 V I C = 8 A, T J = 25 C - 4.29 4.72 I C = 4 A, T J = 5 C - 3.2 3.42 Reverse recovery energy of the diode E rec VGE = 5 V, R g = 5, L = 2 μh - 574 86 μj Diode reverse recovery time t rr V CC = 6 V, I C = 4 A - 2 8 ns Peak reverse recovery current I rr T J = 25 C - 43 65 A Revision: 9-Oct-7 2 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
P D (W) I C (A) I C (A) I C (A) www.vishay.com VS-4MT2UHAPbF THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS Operating junction temperature range T J -4-5 C Storage temperature range T Stg -4-25 Junction to case IGBT - -.29 R thjc Diode - -.6 Case to sink per module R thcs Heatsink compound thermal conductivity = W/mK -.6 - Clearance () External shortest distance in air between 2 terminals 5.5 - - Creepage (2) Shortest distance along external surface of the insulating material between 2 terminals 8 - - Mounting torque to heatsink A mounting compound is recommended and the torque should be checked after 3 hours to allow for 3 ± % Nm the spread of the compound. Lubricated threads. Weight 66 g C/W mm 8 6 μs 4 μs ms 2. DC 2 4 6 8 2 4 6 T C ( C). Fig. - Maximum DC Collector Current vs. Case Temperature Fig. 3 - Forward SOA T C = 25 C; T J 5 C 6 5 4 3 2 2 4 6 8 2 4 6 T C ( C) Fig. 2 - Power Dissipation vs. Case Temperature Fig. 4 - Reverse BIAS SOA T J = 5 C; V GE = 5 V Revision: 9-Oct-7 3 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
I CE (A) I CE (A) I CE (A) I F (A) VS-4MT2UHAPbF www.vishay.com 6 4 2 V GE = 8V VGE = 5V VGE = 2V VGE = V VGE = 8.V 2 8-4 C 25 C 25 C 8 6 4 2 6 4 2 2 4 6 8.. 2. 3. 4. 5. V F (V) Fig. 5 - Typical IGBT Output Characteristics T J = - 4 C; t p = 8 μs Fig. 8 - Typical Diode Forward Characteristics t p = 8 μs 6 4 2 V GE = 8V VGE = 5V VGE = 2V VGE = V VGE = 8.V 2 8 6 4 2 I CE = 8A I CE = 4A I CE = 2A 8 6 4 2 8 6 4 2 2 4 6 8 5 5 2 V GE (V) Fig. 6 - Typical IGBT Output Characteristics T J = 25 C; t p = 8 μs Fig. 9 - Typical V CE vs. V GE T J = -4 C 6 4 2 V GE = 8V VGE = 5V VGE = 2V VGE = V VGE = 8.V 2 8 6 4 2 I CE = 8A I CE = 4A I CE = 2A 8 6 4 2 8 6 4 2 2 4 6 8 5 5 2 V GE (V) Fig. 7 - Typical IGBT Output Characteristics T J = 25 C; t p = 8 μs Fig. - Typical V CE vs. V GE T J = 25 C Revision: 9-Oct-7 4 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
I CE (A) Swiching Time (ns) Energy (μj) Swiching Time (ns) www.vishay.com VS-4MT2UHAPbF 2 8 6 4 I CE = 8A I CE = 4A I CE = 2A td OFF 2 8 t R 6 4 td ON 2 5 5 2 V GE (V) t F 2 4 6 8 I C (A) Fig. - Typical V CE vs. V GE T J = 25 C Fig. 4 - Typical Switching Time vs. I C T J = 25 C; L = 25 μh; V CE = 4 V R g = 5 ; V GE = 5 V 35 6 3 T J = 25 C T J = 25 C 5 E ON 25 2 4 E OFF 5 3 5 2 48 5 5 2 V GE (V) Fig. 2 - Typical Transfer Characteristics V CE = 5 V; t p = μs 2 3 4 5 6 R g (Ω) Fig. 5 - Typical Energy Loss vs. R g T J = 5 C; L = 25 μh; V CE = 6 V I CE = 4 A; V GE = 5 V 42 36 3 td OFF 24 Energy (μj) 8 2 E ON td ON t R t F 6 E OFF 2 4 6 8 I C (A) Fig. 3 - Typical Energy Loss vs. I C T J = 25 C; L = 25 μh; V CE = 4 V R g = 5 ; V GE = 5 V 2 3 4 5 6 R g (Ω) Fig. 6 - Typical Switching Time vs. R g T J = 5 C; L = 25 μh; V CE = 6 V I CE = 4 A; V GE = 5 V Revision: 9-Oct-7 5 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
I rr (A) V GE (V) I rr (A) Capacitance (pf) I rr (A) Q rr (μc) VS-4MT2UHAPbF www.vishay.com 5 R g = 5.Ω 5. 4.5 6A 4 R g = Ω 4. 3.5 4A 3 2 R g = 3 Ω R g = 5 Ω 3. 2.5 2..5 5Ω 3Ω Ω 5.Ω 2A..5 2 3 4 5 6 7 I F (A). 2 4 6 8 2 di F /dt (A/μs) Fig. 7 - Typical Diode I rr vs. I F T J = 25 C Fig. 2 - Typical Diode Q rr vs. di F /dt V CC = 6 V; V GE = 5 V; T J = 25 C 5 Cies 4 3 Coes 2 Cres 2 3 4 5 6 R g (Ω) Fig. 8 - Typical Diode I rr vs. R g T J = 25 C; I F = 4 A 2 4 6 8 Fig. 2 - Typical Capacitance vs. V CE V GE = V; f = MHz 5 6 45 4 4 2 6V 35 3 25 2 5 8 6 4 2 2 4 6 8 di F /dt (A/μs) Fig. 9 - Typical Diode I rr vs. di F /dt V CC = 6 V; V GE = 5 V; I CE = 4 A; T J = 25 C 2 3 4 5 Q G, Total Gate Charge (nc) Fig. 22 - Typical Gate Charge vs. V GE I CE = 5. A; L = 6 μh Revision: 9-Oct-7 6 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-4MT2UHAPbF Thermal Response ( Z thjc )... D =.5.2..5.2. τ τ R R 2 R 3 R R2 R3 τ J τ J τ 3 τ 2 τ 2 τ 3 Ci= τi/ri Ci= i/ri τ C τ Ri ( C/W) τi (sec).43.24.5.44929.23.977. Notes: SINGLE PULSE. Duty Factor D = t/t2 ( THERMAL RESPONSE) ) 2. Peak Tj = P dm x Zthjc + Tc E-5 E-6 E-5.... t, Rectangular Pulse Duration (sec) Fig. 23 - Maximum Transient Thermal Impedance, Junction to Case (IGBT) D =.5...2..5.2. R R 2 R R2 τ J τ J τ τ τ 2 τ 2 Ci= τi/ri Ci i/ri τ C τ Ri ( C/W) τi (sec).24.8.549.98 Thermal Response ( Z thjc ) SINGLE PULSE ( THERMAL RESPONSE) Notes:. Duty Factor D = t/t2 2. Peak Tj = P dm x Zthjc + Tc. E-6 E-5... t, Rectangular Pulse Duration (sec) Fig. 24 - Maximum Transient Thermal Impedance, Junction to Case (Diode) 3, 4 2 5, 6 9 7, 8 Fig. 25 - Electrical diagram Revision: 9-Oct-7 7 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-4MT2UHAPbF L Driver K D.U.T. + - V CC D C D.U.T. + - 9 V Fig. CT. - Gate Charge Circuit (Turn-Off) Fig. CT.3 - S.C. SOA Circuit L Diode clamp/ D.U.T. L - + 8 V + - R g D.U.T. V - 5 V D.U.T./ driver + - V CC R g Fig. CT.2 - RBSOA Circuit Fig. CT.4 - Switching Loss Circuit ORDERING INFORMATION TABLE Device code VS- 4 MT 2 U H A PbF 2 3 4 5 6 7 8 - product 2 - Current rating (4 = 4 A) 3 - Essential part number 4 - Voltage code (2 = 2 V) 5 - Speed / type (U = ultrafast IGBT) 6 - Circuit configuration (H = half bridge) 7 - A = Al 2 O 3 DBC substrate 8 - PbF = lead (Pb)-free Revision: 9-Oct-7 8 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-4MT2UHAPbF CIRCUIT CONFIGURATION Dimensions LINKS TO RELATED DOCUMENTS www.vishay.com/doc?9575 Revision: 9-Oct-7 9 Document Number: 9457 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Outline Dimensions MTP DIMENSIONS in millimeters 2 ±.3 39.5 ±.3 2 ±.3 Ø. ±.25 3. 2..5 z detail 5 2.5 ±. 45 ±. 63.5 ±.5 6 ±.3 Use self tapping screw or M 2.5 x X e.g. M 2.5 x 6 or M 2.5 x 8 according to PCB thickness used.8 Ra.3 48.7 ±.3 7.4 5 4.7 2 9 4.2 6 33.2 ±.3.2 3.8 ±.5 9.8 ±. 45 8 7 6 5 4 3 2 3 9 2 5.4 22.7 Ø 2. (x 4) 3 6 5.2 R 2.6 (x 2) Dia. 5 (x 4) 27.5 ±.3 Pins position with tolerance.6.5 4.7 Note Unused terminals are not assembled in the package Revision: -Jul-5 Document Number: 9575 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9