SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust ment Increase in the level of characteristics in the highfrequency field (In house comparison) 4 5 6 8 Part name Material Flammability Housing Polybutyleneterephthalate UL4V-0 Rotor Wiper Nickel silver O ring Silicone rubber UL4HB Resistive element RuO cermet Terminal pin Copper, Tin-plated Adhesive Epoxy UL4V-0 Base element Ceramic Electrode Ag-Pd cermet PART NUMBER DESIGNATION F T - 6 E T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin E:Sn (Lead-free) Form of packaging T:Taping (Ammo pack type) Blank:Bulk in plastic bag Product shape P: V: Resistance value S: X: H: N: Please refer to the LIST OF PART NUMBERS when placing orders.
FT-6 LIST OF PART NUMBERS position :Not manufactured Form of packaging Taping (Ammo pack type) Plastic bag FT-6ETP FT-6EP FT-6ETV FT-6EV FT-6ETS FT-6ES FT-6EX FT-6ETH FT-6EH FT-6EN Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 00 Ω 500 Ω k Ω k Ω k Ω 5 k Ω 0 k Ω 0 k Ω 0 k Ω 50 k Ω 00 k Ω 00 k Ω 00 k Ω 500 k Ω M Ω M Ω The above part numbers are all available with the respective com bi na tion of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in tap ing unit. The products indicated by A mark are manufactured upon receipt of order basis. ELECTRICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS Nominal resistance range 0 Ω ~ MΩ Mechanical angle 60 ( turn) Resistance tolerance ± 0 % Operating torque 0 mn m {04 gf cm} maximum Power ratings 0.5 W (0 C) 0 W (5 C) Stop strength 50 mn m {50 gf cm} minimum Resistance law (B)Linear law Rotational life 00 cycles [ Δ R/R ± ( Ω + %)] Maximum input voltage DC00 V or power rating, whichever is smaller Terminal strength 0 N {.0 kgf} minimum (Tensile strength) Maximum wiper current Power ratings Thrust to rotor 0 N {.0 kgf} minimum Effective electrical angle 0 ( turn) Solderability 45 ± C, ~ s End resistance % or Ω, whichever is greater { }:Reference only C.R.V. % or Ω, whichever is greater Operating temp. range 55 ~ 5 C Temp. coefficient 0 Ω ~ 0 Ω : ± 50 0-6 / C maximum 50 Ω ~ MΩ : ± 00 0-6 / C maximum Insulation resistance 000 M Ω minimum (DC500 V) Dielectric strength AC00 V, 60 s Net weight Approx. 0.5 g (FT-6EP, EV) Approx. 0.66 g (FT-6ES, EH, EX, EN)
FT-6 ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Specifications Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C (80 ~ 8 %), 0 cycles, 40 h 8 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 6 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W 000 h 55 C, h 5 C, 50 h [ Δ R/R %] [S.S. %] [ Δ R/R %] [ Δ R/R %] [S.S. %] [ Δ R/R %] [S.S. %] [ Δ R/R %] [S.S. %] [ Δ R/R %] [S.S. %] 85 C, 60 s No leaks (No continuous bubbles) Flow 60 ± C, 5 ~ 6 s, two times maximum Manual soldering 80 ± 0 C, ~ 4 s [ Δ R/R %] Δ R/R:Change in total resistance S.S. :Setting stability MAXIMUM INPUT RATINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (ma) A 0 00.4 A 0 00.6 58 50 500 5.00 00 00 0.0 0. 00 0 0.0 50.0 00 0. 40.8 500 50 5.8.6 k 0.4.4 k 0.6 5.8 k 0 8.. 5 k 50 50.0 0.0 0 k 0 0..0 0 k 0 00 5.00 0 k 0 4.08 50 k 50 58.6 00 k 04 00.00 00 k 04 00.00 00 k 04 00 0.66 500 k 504 00 0.40 M 05 00 0.0 M 05 00 0.0 The products indicated by A mark are manufactured upon receipt of order basis.
FT-6 OUTLINE DIMENSIONS FT-6EP 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 5.8 ± FT-6ES 0 60 Nom. 0.W L.6D 0..5 8..5 ± φ 0.45 FT-6EX 0 0.W L.6D 0. 60 Nom. 8..5 Lead-free Identification mark 0 ± φ 0.45
FT-6 OUTLINE DIMENSIONS FT-6EV 60 Nom. 0.W L.6D Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 0.45 φ 5.8.5 ± 6 ± FT-6EH Lead-free Identification mark 0 60 Nom. 0.W L.6D 0..5 ±.5 ± 8. FT-6EN Lead-free Identification mark 0 0. 60 Nom. 0.W L.6D.5 φ 0.45.5 ± 8. φ 0.45 Terminals & position in N type is different from X type.
FT-6 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6ETV FT-6ETP 60 Nom. 0.W L.6D 60 Nom. 0.W L.6D. ± Δ max. Δ max.. ± Δ max. Δ max. 4.8 ± 8 ± 0.5 ± 0.5 min. 8 ± 0.5 4.8 ± ± 0.5 6 ± min. +0. +0. 5.8 5.8 ± 0.5 0. 0. 6.5 ± 0.5 φ 4 ± 0. 6.5 ± 0.5 φ 4 ± 0.. ± 0. 0.45 ± 0.0. ± 0. 0.45 ± 0.0 FT-6ETH FT-6ETS 60 Nom.. ± 0 0.W L.6D Δ max. 8. 0. Δ max. 60 Nom.. ± 0 0.W L.6D Δ max. 8. 0. Δ max. ± 0.5. ± ± 0.5 min. +0. 8 ± 0.5.5. ± ± 0.5 6 ± min. +0. 8 ± 0.5.5 0. 6.5 ± 0.5. ± 0. 0.45 ± 0.0 φ 4 ± 0. 6.5 ± 0.5 φ 4 ± 0. 0.. ± 0. 0.45 ± 0.0
FT-6 PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 000 pcs. per reel. Orders will be accepted for units of 000 pcs., i.e., 000, 000, 000 pcs., etc. Tape & reel version contains 000 pcs. in one box. <Bulk pack specifications> Unit of bulk pack in a plastic bag is 00 pcs. per pack. Boxing of bulk in a plastic bag is performed with 000 pcs. per box. Ammo pack type Ammo Pack Package size: 0 mm 0 mm 45 mm The leader and end of the tape have an empty part of minimum 00 mm respectively. There are two tape outlets on the package for different terminal alignment directions, for which details refer to the sketch above. (e.g.) When the tape is fed from the right outlet marked, # terminal comes out first. Gross weight of the boxing version ETV : Approx. 850 g ETH : Approx. 40 g ETP : Approx. 80 g ETS : Approx. 40 g # terminal 45 Direction of feed 0 0 Direction of feed # terminal